8404/E8 MAINT AND CERTAIN REPAIR/REPLACEMENT TO LEAKAGE/SEEPAGE, FLOORING, BRICK WORK, PLASTERING WORK, ROOFING SHEET, CEILING, JOINERY, SANITARY AND PLUMBING WORKS AND INTERNAL ELECTRIFICATION IN OTM AND MD ACCN UNDER GE EAST BAREILLY

Amount

Taking down cement plaster including racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed by Engineer - in - Charge.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons Laid, bedded and pointed in any mortar etc complete all as specified and directed.

Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)complete all as specified and directed by Engineer-in-Charge.

Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed by Engineer-in-Charge.

Demolition concrete of any description and in any position not otherwise specifically provided cement concrete complete all as specified and directed.

Dismantling structural steel work including doors , gates but excluding framed truss etc complete all as specified and directed.

Taking down chowkats or frames not exceeding 1.5 Sqm each with shutter (without taking off shutter from the frame) complete all as specified and directed by Engineer-in-Charge.

Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutter (without taking off shutter from the frame) complete all as specified and directed by Engineer-in-Charge.

Taking down shutter of any description exc. 1 sqm but n.exc 2 sqm each and removing from site complete all as specified and directed by Engineer-in-Charge.

Taking up or down15 mm steel tubing and connections including cleaning for refixing or removal complete all as specified and directed by Engr-in-Charge

Taking up or down20 mm steel tubing and connections including cleaning for refixing or removal complete all as specified and directed by Engr-in-Charge

Dismantling water tanks 500 ltr & n exc 1000 ltr and removing to store of all retrieved material complete all as specified and directed.

M&L 15mm thick rendering in cement mortar 1:4 to brick masonry wall surfaces or on other than fair faces of brick wall surfaces finished fair & even without using extra cement for fixing tiles etc complete all as specified and directed

M & L 25 mm thick PCC 1:2:4 type B-1, using 12.5 mm graded stone aggregate as in floors, surfaces finished fair and even complete all as specified and directed.

M& L 100 mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base floor / pavings complete all as specified and directed.

M&L screed bed or bedding layer of mortar, 15 mm thick, in cement mortar 1:6, for laying floor finishes/tiles complete all as specified and directed.

M&L screed bed or bedding layer of mortar, 20 mm thick, in cement mortar 1:6, for laying floor finishes/tiles complete all as specified and directed.

M&L Non- skid coloured ceramic tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified and directed.

M & L for 7 mm thick glazed coloured ceramic tiles ( square/ rectangular) with border , area of each tile area (300x450/300x600 mm size approved by GE), as in vertical surfaces such as skirting or dado set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles complete all as specified and directed.

M&L for vitrified coloured tiles 9-10 mm thick (Square/rectangular) polished area of each tile not exceeding 0.36 sqm on floor set and jointed in neat cement mortar and pointed in white or coloured cement to match complete all as specified and directed.

M&L for vitrified coloured tiles 9-10 mm thick (Square/rectangular) polished area of each tile not exceeding 0.36 sqm in vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for vitrified ceramic exterior heavy duty out door coloured tiles 12 mm thick (Square/rectangular) polished area of each tile size not exceeding 0.36 sqm on floor set and jointed in neat cement mortar and pointed in white or coloured cement to match complete all as spd as directed.

M&L 15-18 mm thick granite of black colour (tablee rubbed and polished) as in windows cill , in steps, jambs, pillars, cooking platforms and like in cement mortar (1:4) including form work , pointing in white cment (1:2) using marble dust with admixture of pigment to match with shade of granite with full round bull nosing edging complete all as spd as directed

M & L for 75mm thick PCC 1:3:6 , type C-2 using 40 mm graded stone aggregate as in plinth protection laid in slope in 1:30 in alternative bays not exceeding 3 mtr in length. Exposed surfaces finished even and smooth without using extra cement including raking out joints between panel to panel and panel to wall and plugging the same with bitumen mastic using bitumen and sand mixture in 1:3 complete all as specified and directed .

M&L Sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.

M&L for chequered cement concrete tiles 20cmx20cmx25mm thick, set, jointed and pointed in neat cement slurry in floors ,path ect with grey pigment cement complete all as specified and directed

M&L for cement Concrete coloured interlocking paver blocks shall be factory made with casting in rubber/pvc moulds & compacting on a vibro table assembly and shall be cured in curing tank for atleast 14 days and then air dried before use. The paver block shall be confirming to IS 15658 -2006 of 60mm thickness, M-35 Grade. Approved design, shape, size and colour of top layer complete all as specified and directed.

M&L for PCC (1:2:4) type B1 using 20mm graded agg for machine pressesd precast cement concrete kerb stone 300x150x450mm including weathering, slightly rounded or chemferred angles and throating , as directed edges complete including excavavtion for kerb stone complete all as specified and directed.

M&L for brick work with fly ash bricks, straight or curved on plan exc. 6 m mean radius, built in CM (1:6) complete all as spd as directed

M&L rendering 15 mm thick in CM 1:6 on brick masonary wall surfaces or on other than fair faces of brick masonry finished without using extra cement complete all as specified and directed.

M& L for rendering 15mm thick in cement mortar (1:4),finished even and smooth using extra cement to on brick masonary wall surfaces or on other than fair faces of brick masonary finished even and smooth without using extra cement complete all as specified and directed.

M&L rendering 5 mm thick in CM 1:3 as on concerete surface on ceilings finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

M & L for applying cement slurry over existing roof surface @ 3 Kg/Sqm incl mix with water proofing liquid @ 0.15 ltr per 50 kg cement bags as per manufactures instructions complete all as specified and directed.

M&L screed bed or bedding layer of mortar, 15 mm thick, in cement mortar 1:4, over RCC roof slabs for laying water proofing treatment mixed with using water proofing liquid @ 150 ml per bag of cement complete all as specified and directed by Engineer-in-Charge.(Note : Water proofing liquid shall be measured and paid separately)

supply Integral water proofing Liquid of Dr fixit/sika/Fosroc complete all as specified and directed.

M&L PCC 1:5:10 type E-2 as sunken sub base of floor fillings with broken brick agg complete all as specified and directed.

S&F 32mm dia GI pipe, medium grade as in spout pipe in sunken floor complete all as specified and directed.

S & F in repair 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints,complete all as spd as directed

S&F for 40 mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed .

S&F 35mm thick factory made glazed and skeleton door shutters open rebated of second class hard wood rail and styles(Hollock), prepared to receive glass/gauge etc without sash bars, edges of framing plain cham-fered or rounded, mitred and rebated sash bars, any numbers The size of rails & style as specified in SSR Part-I (2009) section 8 and as per IS-1003(Part-I) kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed by Engineer-in-Charge. (Note :- S & F wire mess shall be measured and paid for separately)

S & F 150 mm long floor door stopper of brass body and tongue with hard drawn steel spring. Fixed in floor complete all as specified and directed.

S & FSolid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S&F 30 mm thick Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C' channel heaving a PVC sheert strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bbottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F 18 mm thick imported pine wooden medium density fibre board fixed with frame icluding hold fast ( as in shutter incl knob in each shutter) etc including magnet catcher built board with all necessary fittings complete all as specified and directed.

S & F for aluminium powder coated frame hollow sections members of size 63.50 mm x38mmx 1.48 mm thick,3 mm thick aluminium composite panel into the wall for kitchen cabinet/ cupboard shelf with aluminium clip/strips/beading with rubber gasket , design as pe site requirement basis, complete all neccessary fitting complete all as specified and directed.

S&F mild steel window grills box type framed work as in window guard bars, grills or forged into spikes, framed balusters, walkway railing and similar work including welding complete FE-290 grade E-165 all as specified and directed.

S&F for steel windows/ventilators conforming to IS-1038 with side hung shutters including box type hinges with 2 Nos MS 100mm size tower bolt over MS flat iron for each openable leaf & Z section handle and steel peg stay complete without glazing bars, dovetailed or welded including one shop coat of Red Oxide Zinc chromate primer complete all as specified and directed by Engineer-in-Charge. (Note :- Wire cloth shall be measured and paid for separately).

S&F for steel windows conforming to IS-1038 with side hung shutters including box type hinges with 2 Nos MS 100mm size tower bolt over MS flat iron for each openable leaf & Z section handle and steel peg stay complete with glazing bars, dovetailed or welded including one shop coat of Red Oxide Zinc chromate primer complete all as specified and directed by Engineer-in-Charge. (Note :- Glass shall be measured and paid for separately).

S&F in repairs Stainless Steel plate rack of size 90x80x25cm made with 1.00 mm thick sheet including taking out existing wooden plat rack, complete all as specified.

S&F for steel ventilators fixed type, with glazing bars complete welded including one shop coat of Red Oxide Zinc chromate primer complete all as specified and directed by Engineer-in-Charge. (Note :- Glass shall be measured and paid for separately).

M&L for 3mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc. 0.5 Sqm in each pane complete all specified and as directed.

Hacking out old, broken glass (any thickness,) size quality or description) from metal frames incl.punching or drilling out old glazing pins/spring clips and fixing new ones incl M&L for 3mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc. 0.5 Sqm in each pane complete all specified and as directed.

S&F stainless steel wire cloth, 0.56 mm nominal dia of wire and average with of aperture 1.18 mm and fixed with stainless steel wire staples complete all as specified and directed by Engineer-in-Charge.

S&F in repair stainless steel wire cloth, 0.56 mm nominal dia of wire and average with of aperture 1.18 mm and fixed with stainless steel wire staples in m s window / wooden shutter complete all as specified and directed

S&F aluminium alloy powder coated aluminium door frame fixed with side hung shutters and glazing fixed with and including 5.50mm thick tinted glass fixed with rubber gasket with aluminium heading, clips frame made with aluminium box sec as appended below complete all as specified and directed (a) Frame 100x44x1.20mm thick with rawl plug (b) Middle/style rail : 85x44x1.20mm thick (c) Bottom/top rail : 114x44x1.20mm thick (d) Aluminium beading : 0.7mm thick (e) Aluminium handle D type 150mm long, aluminium tower bolt 9.9mm dia shoot 200mm long brass mortise lock 100mm 4 leaver aluminium stopper, cleat double action floor spring hydraulically regulated made of n.less than 1.25mm thick aluminium alloy sheet foundation box main body with stainless steel cover governing pivot made of brass other part of steel heavy duty (f) Making good of wall surface to match with existing surface complete.

S&F aluminium alloy powder coated aluminium door frame fixed with side hung shutters and glazing fixed with and including 5 mm thick aluminium composite panel LDPE core PET coating ( both side decorative type ) fixed with rubber gasket with aluminium heading, clips frame made with aluminium box sec as appended below complete all as specified and directed (a) Frame 100x44x1.48mm thick with rawl plug (b) Middle and lock rail : 150x44x1.48mm thick (c) Bottom rail : 150x44x1.48mm thick (d) Top rail/style : 85x44x1.48mm thick (e) Aluminium beading : 0.7mm thick (f) Aluminium handle D type 150mm long, aluminium tower bolt 9.9mm dia shoot 200mm long brass mortise lock 100mm 4 leaver , with S S hinges complete (g) Making good of wall surface to match with existing surface complete.

S&F Powder coated aluminium sliding windows frame with movable shutter ( sliding on minimum two PVC roller of best quality, for each shutter on three tracks with stainless steel mosquito proofing and glazing shutter and incl 5.50 mm thick glass & stainless steel wire messs fixed with neoprene rubber gasket with aluminium beading, clips,frame made with aluminium section as appended below- i) Window frame :95x38mm X 1.15 mm thick for three tracks. (ii) Top/bottom rail and style / rail of shutter : 15x37.5x1.15 mm thick and over. (iv) stainless steel wire cloth 0.45mm nominal dia of wire and average width of aperature 1.40mm and fixed in aluminium window or alongwith F/Y section fixed with aluminium wire staples complete. (v) Aluminium fittings such aluminium suitable handle with auto interlock cap with suitable size . (vi) Making good of wall surfaces with silicon to match with existing surfaces complete all as specified and directed.

S&F Powder coated aluminium sliding windows and frame with movable shutter ( sliding on minimum two PVC roller of best quality on two tracks Aluminium composite panel shutter fixed with neoprene rubber gasket with aluminium beading, clips,frame made with aluminium section as appended below- (i) Window frame :63x35mm X 1.48 mm thick for two tracks. (ii) Top/bottom rail and style / rail of shutter : 19x38x1.48mm thick and over. (iii) Aluminium beading - 0.7mm thick (iv) Aluminium fittings such as aluminium suitable fittings for auto interlocking closing (v) Making good of wall surfaces to match with existing surfaces complete all as specified and directed.

S&F Powder coated aluminium ventilators box type with louvers & wire mess neoprene rubber gasket with aluminium beading, clips,frame made with aluminium section as appended below- (i) Window frame :63x35mm X 1.48 mm thick for two tracks. (ii) Top/bottom rail and style / rail of shutter: 19x38x1.48mm thick and over. (iii) Aluminium beading - 0.7mm thick (iv) Aluminium neccessary fittings complete as required basis. (v) Making good of wall surfaces to match with existing surfaces complete all as specified and directed.

S & F for aluminium powder coated frame hollow sections members of size 63.50 mm x38mmx 1.48 mm thick,4 mm thick aluminium composite panel LDPE core with PET coating fixed with into the wall for kithen cabinet/ cupboard shelf incl hanging self for clothes with aluminium clip/strips, pvc beadings fixed with adhesive on pvc edging, design of shelf as per site requirements basis, complete all neccessary fitting all as specified and directed

S & F partition wall of powder coated aluminium hollow sections members of size 63.50 mm x38mmx 1.48 mm thick with distance of vertical hollow section, 1.2mtr to 1.8 mtr height of wall having top rails ,bottom rails and middle rail of size 63.50 mm x38mm x 1.48 mm and upto middle rail wall panels shall be covered by 5 mm thick aluminium composite panel LDPE core PET coating ( both side decorative type )with aluminium clip height of middle rail shall be 1 meter from floor and remaining portion above middle rail shall be provided with 5 mm thick glass incl eaching approved designed with aluminium stiprs/beadings with rubber gasket as per existing or as provided compelte all as specified and directed

M & L powder coated aluminum window/ doors grills fixing along with frame of following specification, grills with opening 69.4mm X 78.2mm grills thickness shall be of 6.4mm X 5.8mm having weight not less than 2.306 Kg/per sqm shape as ordered with frame channel of 34 X 11mm X1.7mm thick fixed with screw inside of the window all as directed by Engr-in-Charge and all as specified and as directed.

S&F in repair Venetian blind coloured strip 75 mm top 5 mm thick powder coated aluminium rod rod ends at brackets are moulded type etc complete all as directed.

S& F in repair door closer hydraulically regulated Aluminium (extruded section body), designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as specified and directed.

M & L double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless stell cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as spd and as directed

S&F 12 mm thick toughned glass door with powder coated aluminium frame including neccessary locking ,handle etc with double action floor spring in each shutter complete as requirement of site with suitable height and any type of eaching designed on tougned glass , off cuts complete with finishing wall in CM 1:4 , designed approved by Engr-in Charge

M/L for repairing to existing aluminium doors of any size by straightening of frame / shutter, replacing the detoriated member with new, replacing the broken / non funcional hinges with new, replacing decayed rubber gasket with new, replacing the broken glass pane of any size with new 5.00mm thick tinted/ ordinary glass, replacing unserviceable handle, tower bolt, lock, floor spring, foundation box with governing pivot, top pivot, peg stay etc with new and including taking down and at same place after making the door / window smooth functional complete all as specified and directed.

M&L for E-board/ PVC false ceiling consisting of powder coated GI wall angle, main T and cross T of 25mmX 25 mm X 1.40 mm thick grid frame work, joist, angle/ Tee as directed and mild steel wire hook not less than 6 mm dia with arrangement for adjusting height of ceiling and including provn of 4 mm thick E- Classic board in pannelof size 600X600mm with necessary off cut including dismantling of existing false ceiling and taking down and refixing of Electric fitting carefully complete all as specified and directed.

S&F in repair PVC hollow interlocking wall paneling of 5mm thick prelam PVC sheet. The panel & strips shall be of 600 kg / cbm density manufactured by an ISO-9000 certified company. The strips should two PVC strips. The PVC strip shall be fixed to the wall using 65mm long M.S screws through the groove in the strip by using PVC fasteners. The distance between two screws shall not be more than 200mm. The exact size of the panel and correspondingly of the grid may vary depending on the size of the wall. Optionally a strips of 5mm thick PVC sheet of width 75mm feathered at the edges shall be stuck at the places where two panels are joined, using solvent cement complete all as specified and directed.

S & F 200 mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S & F 150 mm thick Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 150mm size aluminium handles, cast type anodised completed all as specified and directed.

S&F 100 mm size butt hinges medium weight stailess steel colled rolled complete all as specified and directed by Engineer-in-Charge.

S&F in repair 300mm, ordinary rat tail rod patttern springs includding roller and roller platewith fixed to wooden/pressed steel frame chowkats with flat iron 40x3mm size 75 cm long with necessary bolts, etc. complete all as specified and directed.

S&F 300 mm long mild steel sliding door bolts plate type stone enamelled black with bright bolt not less than 16 mm dia with and including a minimum of 6 bolts and nuts, 04 Nos on bolt plate and 02 Nos on staple plate and fix complete all as specified and directed

S&F in repair 1000 litres, rotational moulded polyethylene in double layer water storage tank (cylindrical vertical with closed top with suitable size of M S Tasla with suitable locking system ), hoisted and fixed in position complete all as specified and directed

S&F 500 litres, rotational moulded polyethylene in double layer water storage tank (cylindrical vertical with closed top with suitable size of M S Tasla with suitable locking system ), hoisted and fixed in position complete all as specified and directed .

S&F 20mm bore ball brass valve high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed

S&F 15 mm dia steel water tubing galvanized medium grade concealed in all type wall with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed

S&F 20 mm dia steel water tubing, galvanized, medium gradeconcealed in all type wall with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed

S&F in repair 20 mm dia stainless steel 1.0 mm thick fancy type droppery rod with decorative design matching brackets as approved and knobs (lattu) or end bracket as required incl fitting with 80 mm long SS screw with 75 mm long wooden gitty of appropriate c/s in each end & intermediate support complete all as specified and as directed

S&F in repairs, vitreous China wash hand basin, white, flat back size 550 x 400mm including 15mm dia pillar tap , 450 mm long HDPE PVC connection, 750 mm long 32mm bore HDPE waste down pipe including Stainless steel brackets complete all as specified and directed.

S&F in repairs vitreous chinaware coloured wash hand basin with pedestal of size 55X45X82cm complete including fancy CP pillar tap, CP Waste coupling ,waste pipe ,complete fixing arrangement and cutting for and pinning in walls & making good complete all as specifed and directed by Eng in charge.

S&F in Vitreous China counter top oval type coloured wash basin suitable size including swan neck pillar taps with bottle trap ,but including waste pipe fixing on counter with stainless steel brackets complete all as specified.

S&F in repairs brass chromium plated wall mixer 3 in 1, 15mm for mixing hot & cold water screwd down three joints to steel pipes or unions and plugging and screwed to walls complete all as specified and as directed.

S&F Brass chromium plated wall mixer 2 in 1,15 mm for mixing hot & cold water screwd down three joints to steel pipes or unions and plugging and screwed to walls complete all as specified and directed.

S&F fancy type 15mm dia chromium plated fancy type wall mixer hot & cold with long swan for kitchen sink & WHB fixing and connection to pipes complete all as directed.

S & F in repair fancy type 150mm size square brass CP shower rose all as specified.

S&F in repairs 15 mm dia bib tap fancy type chromium plated with flange quarter turn complete all as specified as directed.

S & F Brass CP Hand Shower with 15mm Dia 1.2 Meter long flexible tube and wall hook screwecd for iron pipe fancy type long body complete all as specified and directed.

S&F fancy type chromium plated brass two way bib cock suitable for 15mm bore pipe complete all as specified and directed. 2 Way Bib Cock with Wall Flange.

S&F in repair fancy type brass chromium plated toilet paper holder, complete all as specified.

S&F in repairs 15mm bore PVC connections, with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repair fancy type brass chromium plated soap dish of 160x160x90 mm , complete all as specified.

S&F in repair fancy type stainless steel towel rack size 600mm long including a pair of brass bracket complete all as specified and directed.

S&F in repair stainless steel of AE - SI 316 grade tubular towel ring including apair of CP brass bracket complete all as specified.

S & F in repair fancy type sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with CP bracket gaurd and railling 60 cm long complete all as specified.

S&F in repair fancy type glass corner 300mm radius of 10mm thick toughned glass with CP railing fixed with screws fancy type complete all as specified .

S&F in repairs of 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as spd as directed

S&F in repair 15 mm dia fancy type stop cock , chromium plated with long shank and cup (conncelaed type)for iron pipe or for unions and fixed complete all as spd as directed

S & F in repairs Rimless Single piece-WC with UF soft close seat cover, Hinges, Fixing Accessories, Accessories Set and Cistern fittings,Size: 360x675x750 mm, S Trap-300 mm good to floor complete all as specified and directed.

S&F in repair fancy type chromium plated brass angle valve type suitable for 15mm bore pipe complete all as specified

S&F in repair vitreous china squatting pan of orrissa pattern long pan size 580 x 440 mm white with "P"or "S" trap size 100 mm dia front or back inlet and integral foot rest any pattern (excluding flushing cistern and flush pipe) including provn of lime concrete bedding complete all as specified. Make Hindware / parryware or equivalent

S&F in repair vitreous China coloured European type WC with "P" or "S" trap white, including connection to drain or out going pipe and flush pipe anti symphonize pipes etc complete all as specified and directed.

S&F in repairs, PVC low level cistern 10 litres capacity, valve less, symphonic action type with float, handle including 32mm dia PVC flush pipe of polyethylene of low or high density & bracket etc complete all as specified and directed .

S & F Brass CP health faucet with 8mm Dia 1.0 Meter Long Flexible Tube and Wall Hook screwecd for iron pipe fancy type long body all as specified and directed.

S&F in repairs, vitreous China bowl urinal flat back size 430x370x340 with grating and union for discharge pipe excluding flushing cistern flush pipe and waste pipe complete all as specified and directed.

S&F in repairs, wall mounted urinal size 370x315x620 with all fixing Accessories complete all as specified and directed.

S&F in repair PVC (SWR) multifloor trap with grating including jointing with solvent cement floor trap 75 mm dia outlet plain with grating including jointing to waste pipe fixed in cement concrete 1:2:4, type B-1 complete all as specified and directed.

S&F in repair PVC (SWR) 75 mm bore pipes single socketed in any length with rubber ring joints fixed to wall and floor with necessary fitting complete all as specified and directed by Engr-in-charge.

S&F in repair PVC (SWR) 110mm bore pipes single socketed in any length with rubber ring joints fixed to wall and floor with necessary fittingcomplete all as specified and directed.

S&F PVC (SWR) 110mm bore bends any radius complete all as specified and directed.

S&F PVC (SWR) 75mm bore bends any radius complete all as specified and directed.

S&F PVC (SWR) 75 mm bore junction single (Single 'T') equal or unequal with access door complete all as specified and directed.

S&F PVC (SWR) 110 mm bore junction single (Single 'T') equal or unequal with access door complete all as specified and directed.

S & F in repair PTMT alloy toilet cabinet with mirror of overall size 350 x 450mm and fixed to wall complete all as specified and directed.

S & F in repair 0.8 mm thick stainless steel kitchen sink size 590x460x230mm undermount, single bowl (bowl size 540x410x230 mm) , incl waste pipe & SS coupling, washers etc. complete all necessary fittings all as specified and as directed .

S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes confirming to IS 1161-1979 complete all as specified and directed.

S&F Pre-coated galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified.

S&F 0.80 mm plain galvanised Mild steel sheeting in ridge, hips, valley gutter,drip and straight flashing class8 with zink coating @ 120 gms /sqm fixed with L- type or J- type or cranked hooks bolts complete all as specified and directed.

M & L for cutting chases of hanging chajjas, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of sunshades, shelves, lintels, Chajja ( up to IInd floor) etc making good, cutting out exc 10cm and not exc 40cm girth in RCC chajjas in brick walls complete all as specified and as directed.

M&L preparation new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over and including one coat of red oxide zinc chrome primer complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of new or previously untreated wooden or wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over and including one coat of pink primer complete all as specified and directed by Engineer-in-Charge.

M&L for complete removal of existing treatment, preparation of old decorated plastered or unplastered surfaces of walls / roof projections including facia,cornices etc. and applying one coat of primer by using Airless spray techonology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr, the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressue and paint usage and certified by paint manufacturer and accessories for applying Primer, should be able to spray in hard to reach areas and penetration of Primer, on the surface to achieve excllent application using limited manpower complete all as specified and directed. Note : - Sanding of old decorated surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer.

M&L for applying two coat of exterior weather proof 100% anti fungal acrylic smooth emulsion with silicon additives that offer anti alge high performance exterior wall finish with 4 years of performance warranty by manufacturer applied by using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacture with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper, should be able to spray in hard to reach areas and penetration of distemper on the surface to achieve excellent application using limited manpower complete all as specified and directed.

M&L for preparing newly plastered walls surfaces and applying two coats of oil bound distemper over 1mm thick wall care putty complete all as specified and directed.

M&L for complete removal of existing treatment on wall by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropirate grit to make surface clean,free from dust ,loose paint etc by skilled labour and applying of two coat OBD on wall with airless electric sprayers over a coat of primer applied using airless electric sprayers over two coats of wall care putty of 1 mm thickness prepared and sanded with electrically operated sanding machine complete all as specified and directed. Application to be done through authorised dealer .

M&L for preparing newly plastered walls surfaces and applying two coats of cement base paint over one coat primer complete all as specified and directed.

M&L for preparing newly plastered surfaces and applying three coats of white wash on ceiling complete all as specified and directed.

M&L for complete removal of existing treatment on ceiling, etc including cleaning of any mortar drops, fungus efflorescent salts etc and preparation of old plastered surfaces and applying two coats of white wash complete all as specified and directed.

M&L for complete removal of existing treatment on wall, etc including cleaning of any mortar drops, fungus efflorescent salts etc and preparation of old plastered surfaces and applying two coats of cement base paint complete all as specified and directed.

Taking down carefully alluminium / copper point wiring complete for light, fan, socket or power point etc with fittings fixtures such as ceiling rose, holders, electric fittings, switchs, sockets, light fitting cable with and incl wooden batten or FR PVC conduit and its accessories such as wooden gutties, rawl plugs, GI screws, aluminium clips, nails etc complete and removing the material from site and making good the disturbed surface of wall / floor/ ceiling etc as original i.e. brick work, plastering, white washing, OBD etc as required, complete all as specified and directed.

M&L point wiring complete with single core FRLS PVC insulated, unsheathed, multi stranded copper conductor cables 1.5 Sqmm 1100 volts grade, with and incl 1.5 Sqmm FRLS PVC insulated, unsheathed, multi stranded copper conductor cables as continuous earth wire connected to metallic bodies of luminaries / fans etc at one end and to common earth dolly at other end, complete wiring drawn through & including PVC Conduit (Concealed in wall/ceiling) of size 20mm dia and above (as per conductor run ) medium grade, ISI marked, incl all accessories & fittings / junction boxes / inspection covers etc, with and including concealed Modular metal flush Box and Modular cover plate for fixing of Modular switches / sockets etc, complete all as specified and directed for light and fan point controlled by one switch. (Note : 1. Rate quoted shall deemed to be inclusive of Modular Metal flush box and cover plate with frame . 2. Rate quoted shall deemed to be inclusive of cutting chasing for taking out old sunken box and fixing modular metal flush box as per site requirement and making good of disturbed surface of wall / floor/ ceiling etc as original by brick work, plastering, white washing, OBD etc as required, complete all as directed.

All as per srl item no. 138 here-in-before but for one socket outlet 3 pin, 5 Amps on same board complete all as specified and directed.

All as per srl item no. 138 here-in-before but for one socket outlet 3 pin, 5 Amps on Independent board complete all as specified and directed.

All as per srl item no. 138 here-in-before but with 2.5 sq mm FRLS copper wire with 2.5 Sqmm FRLS copper earth wire for indpendent 16 Amp point complete all as specified and directed. Note : The point wiring for power point will not be mixed with light/fan point circuit.

M&L point wiring complete with single core FRLS PVC insulated, unsheathed, multi stranded copper conductor cables 1.5 Sqmm 1100 volts grade, with and incl 1.5 Sqmm FRLS PVC insulated, unsheathed, multi stranded copper conductor cables as continuous earth wire connected to metallic bodies of luminaries / fans etc at one end and to common earth dolly at other end, complete wiring drawn through existing PVC Conduit (Concealed in wall/ceiling) , incl all accessories & fittings / junction boxes / inspection covers etc, with and incl concealed Modular metal flush Box and Modular cover plate for fixing of Modular switches / sockets etc, complete all as specified and directed for light and fan point controlled by one switch. (Note : 1. Rate quoted shall deemed to be inclusive of Modular Metal flush box and cover plate with frame . 2. Rate quoted shall deemed to be inclusive of cutting chasing for taking out old sunken box and fixing modular metal flush box as per site requirement and making good of disturbed surface of wall / floor/ ceiling etc as original by brick work, plastering, white washing, OBD etc as required, complete all as directed.

One light / bell / exhaust fan point controlled by one no, 1-way, 5 Amps switch complete all as specified and directed.

One socket outlet 3 pin, 5 Amps on independent board, controlled by one no 5 Amp switch complete all as specified and directed.

One socket outlet 3 pin 5 amps on the same board controlled by one no 5 Amp switch complete all as specified and directed.

All as per srl item no. 142 here-in-before but with 2.5 sq mm FRLS copper wire with 2.5 Sqmm FRLS copper earth wire for indpendent 15 Amp point complete all as specified and directed.

S & F Modular switch 1 way 6A , 1 module size complete all as directed.

S & F Modular switch 1 way 16A , 1 module size complete all as directed.

S & F Modular Bell push 1 way 6A , 1 module size complete all as directed.

S & F Modular Socket , 6 A , 5 Pin , 2 module size complete all as directed.

S & F Modular Socket , 6 A / 16 A , 5 Pin , 2 module size complete all as directed.

S&F electric call bell ding dong AC 230 volts Single Pole complete all as specified and directed. Make : Anchor / Havells / Crompton

S&F Lamp holder, metal cased, bakelite body, 230 volts, complete all as specified and directed. Make : Cona / Havells (Rio)/ SSK

S&F LED lamp 9/10W complete all as specified and directed by the Engineer-in-Charge. Make : Havells / Crompton / Philips

S&F Ceiling rose, two to three terminals, bakelite body, 230 volts, complete all as specified and directed. Make : Cona / Havells (Rio)/ SSK

S&F LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. Make : Havells / CG / Wipro / Philips

S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F of wall mounting light fitting, Decorative type, wall mounting, SS finish fixture with opal glass diffuser suitable and incl suitable size 10W retrofit LED bulb and making necessary electric connection, complete all as specified and directed. Make : Havells (Venza) / Philips / Crompton

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling 6500K including connecting up with driver three core flexible copper conductor cases of suitable size complete complete all as specified and directed..

S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fix in replacement exhaust fan made of study Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and directed. Make : Havells/ Khaitan/ Crompton

M&L for sub main wiring with 2 run of 4 Sqmm FR, PVC insulated, unsheathed and stranded copper conductor cable with and incl 4 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable as earth wire connected with thimble from main DB to sub main DB, drawn drawn through & PVC Conduit of 20 mm and above incl all conduit accessories & fittings / junction boxes / inspection covers etc, with and incl cutting chasing and making good of disturbed surface of wall / floor/ ceiling etc as original by brick work, plastering, white washing, OBD etc as required, complete all as directed. Note : 1. The cost of concealed conduit & accessories is deemed to be included in quoted rates. 2. The two run of 4 Sqmm wire and one run of 4 Sqmm wire will be measured as one unit.

All as per srl item no. 162 here-in-before but with 2 run of 6.0 sq mm FR copper wire with 6.0 Sqmm FRLS copper cable as earth wire.

M&L for sub main wiring with 2 run of 4 Sqmm FR, PVC insulated, unsheathed and stranded copper conductor cable with and incl 4 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable as earth wire connected with thimble from main DB to sub main DB, drawn drawn through Existing concealed PVC Conduit and accessories & fittings / junction boxes / inspection covers etc, with and incl cutting chasing if required for extension of existing DB/switch board as per site requirementand making good of disturbed surface of wall / floor/ ceiling etc as original by brick work, plastering, white washing, OBD etc as required, complete all as directed. Note : 1. The cost of extra conduit & accessories is deemed to be included in quoted rates. 2. The two run of 4 Sqmm wire and one run of 4 Sqmm wire will be measured as one unit.

All as per srl item no. 164 here-in-before but with 2 run of 6.0 sq mm FR copper wire with 6.0 Sqmm FRLS copper cable as earth wire.

S&F in replacement of Distribution Board, double Door, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, TPN 04 way, 415 volts with bus bar rating 200 Amps, dust and vermin proof, suitable for incorporation of MCB’s and isolators etc and making all necessary connections, duly flush of wall surface, making disturbed surface good as original using PCC and applying white putty and two coats of OBD as directed by Engr-in-charge complete all as specified and directed.

All as per item No 166 here in before but SPN 12 way Distibution Board complete all as specified and directed.

All as per item No 166 here in before but SPN 8 way Distibution Board complete all as specified and directed.

All as per item No 166 here in before but SPN 4 way Distibution Board complete all as specified and directed.

S&F in replacement Vertical TPN Loadline with and including MCCB 100 Amps as incomer complete including taking down old DB and making disturbed surface good as original using PCC and applying white putty and two coats of OBD complete all as specified and directed by Engr-in-charge

S&F in replacement of MCB, C Curve type, 10 kA, 63 to 100 Amp, TPN with over load and short circuit protection, complete all as directed.

S&F in replacement of MCB, C Curve type, 10 kA, 63 to 100 Amp TP with over load and short circuit protection, complete all as directed.

S&F in replacement of MCB, C Curve type, 10 kA, 32 Amp, SPN with over load and short circuit protection, complete all as directed.

S&F in replacement of MCB, C Curve type, 10 kA, 40 to 63 Amp, SPN with over load and short circuit protection, complete all as directed.

S&F in replacement of MCB, B Curve type, 10 kA, 6 to 40 Amp, Single Pole with over load and short circuit protection, complete all as directed.

M&L for earthing with galvanized steel earth plate electrode of size 600 x 600 x 6 mm buried directly in ground earth pit not less than 2.25 mtr below of normal ground level with top edge of earth plate should not less than 1.5 mtr below normal ground level and connected to galvanized iron earth lead wire of size 4 mm dia by means of bolts, nuts, washers of galvanized iron or steel all as shown in electrical plate No.3 of MES SSR Part I connecting to earthing test point on completion with and including 15 mm bore GI light grade protection pipe (7.5 mtr long) for earth lead GI lead wire 4mm dia (7.5 mtr long), PCC pit with cover in PCC 1:2:4 type B-1 reinforced with 8 mm dia tor bars @ 80mm C/C, 20mm dia medium grade watering pipe with funnel, wire mesh, common salt, charcoal, necessary excavation and earth work, complete all as specified and directed.

S & F in replacement stepped type electronic fan regulator flush type on the existing phenolic laminated sheet complete all as specified and directed.

S & F in replacement capacitor 1.5 to 3.5 Mfd suitable for ceiling/exhaust fan complete all as specified and directed.

S & F in replacement modular fan regulator flush type complete all as specified and directed.

Taking down ceiling/exhaust fan of any size for repair and refixing the same after carrying out necessary repair all as spcified and directed.

M & L for rewinding of burnt fan motor of 1200/1400 mm sweep using super enameled copper wire of of suitable size including replacement of bearing, cleaning and connecting up with flexible copper wire of approprite size ceiling rose to fan complete all as specified and direcred

M & L for rewinding of burnt fan motor of exhaust fan 250/300 mm sweep using super enameled copper wire of of suitable size including replacement of bearing, cleaning and connecting up with flexible copper wire of approprite size ceiling rose to fan complete all as specified and direcred

M & L for taking down unserviceable Geyser for repair including repalcement of UNSV assemby of existing make and modal suitable for Geyser of capacity 25/50 Ltr complete all as specified and directed

M & L for replacement of heating element 1.5/2 KW of existing shape and size complete all as specified and directed.

S&F in replacement PVC connection flexible heavy grade 45 cm long complete with chromium plated flair nut and washer at both ends complete all as specified and directed.

S&F in repalcement thermostate adjustable type suitabel for temp 0 to 90 degreecomplete all as specified and directed , ISI Marked

S&F in replacement DBOX MCB protected Socket plastic base dimension 415 x 375 x 225mm 4 module raise neutral link complete with one single pole MCB 20 Amp 'C' Series 240 VOLT including making disturbed surface good as original using PCC and applying white putty and two coats of OBD as directed by Engr-in-charge

S&F in replacement modular white cover plate three module with frame of existing shape and size including 01 No. 6/16 Amp Modular Switch and socket complete all as specified and directed

S&F in replacement modular white cover plate 6/8 module with frame of existing shape and size including 6 Amp Modular switch 4 Nos and socket 01 no. complete all as specified and directed

S&F in replacement Hylem sheet size 8" x 11" including MS sunken box 1.6 mm thick of existing shape and size including 06 Nos 6 Amp piano type switches and 1 No. Socket and fan regulator including making damaged surface good as original using plaster and white cement as per site requirement all as directed by Engr-in-charge

S&F in replacement Hylem sheet size 8" x 5" including MS sunken box 1.6 mm thick of existing shape and size including 01 No. 16 Ampa switch and socket including making damaged surface good as original using plaster and white cement as per site requirement all as directed by Engr-in-charge

S&F in replacement PVC casing & caping of size 25 mm including taking out the damaged casing , caping and fixing new casing caping including all fittings and fixture as per site reqmt complete all as specified and directed.

QUALITY CONSTRUCTIONS (BID ID -3345122)

M/S SAJJAD HUSSAIN CONTRACTOR (BID ID -3343607)

NETRAPAL SINGH (BID ID -3346955)

M/S ABHISHEK ENTERPRISES (BID ID -3346547)