Supply and Installation of LAN, WiFi, PA system and EPABX at Collegiate Education Directorate ,Vikas Bhavan Thiruvananthapuram.

Amount

Part A -LAN and WiFi

Supply and Installation of 28 port Ethernet Core Switch with 24 x 1010/100/1000 Mbps ports,4x10G including 2x10GBASE-T and 2xSFP+ports with L2 switching and L3 routing (static, RIP, OSPF, VRRP, PIM-SSM, PBR),Automatic DHCP configuration, AV-over-IP, Multicast VLAN, web manageable supporting ipv4/ipv6,Switching Capacity: ≥ 128Gbps.including required VLAN configurations. Warranty: 3 Year Approved Make: CISCO,Netgear,Allied Telesis, Brocade, , HP

Supply and Installation of Layer 2 Manageable 28 port Ethernet Switch which having 8 x 10/100/1000 Mbps + 4 x Gigabit SFP, web manageable supporting ipv6 having Switching Capacity: ≥ 20Gbps, 256 MB flash memory, AC 120/230V. Warranty: 3 Year Approved Make: Allied Telesis, Brocade, Cisco, HP, Netgear

Supply and fixing UL certified 24 port Enhanced CAT-6 fully loaded Modular type Patch Panel as per EIA/TIA-TSB 40A specification for interconnecting servers and clients, including termination charges. Approved Make: Actassi, Belden, Commscope, R&M, Molex

Supply and Installation of UL Certified CAT-6 Information Outlet for 1000Mbps having spring shutter / dust cover face plate with one number of RJ45 keystone socket in the existing CMS/PVC Box including termination charges etc. Approved Make: Actassi, Belden, Commscope, R&M, Molex

Supply and Installation of UL Certified CAT-6 Information Outlet for 1000Mbps having spring shutter / dust cover dual face plate with two numbers of RJ45 keystone sockets in the existing CMS/PVC Box including termination charges etc. Approved Make: Actassi, Belden, Commscope, R&M, Molex

Supply and fixing of UL Certified CAT-6 Information Outlet for 1000Mbps with spring shutter / dust cover face plate + Single RJ45 Jack + Single RJ11 Jack in the existing CMS/PVC Box including termination charges etc. Approved Make: Actassi, Belden, Commscope, R&M, Molex

Supply, laying, certification and documentation of 23 AWG Soild copper CAT-6 UTP cable with LSZH (Low Smoke Zero Halogen) through the existing conduit and cassing and capping as required. Approved Make: Actassi, Belden, Commscope, R&M, Molex

Supply and Installation of 6 Core Single Mode Low Water Peak Outside plant (OSP) OFC having LSZH sheath, conforming to ITU-T G.655, IEC 60794-1 : 2001, IS 13882 (Part 1/Sec 1) : 1999 etc. Approved Make: Actassi, Belden, Commscope, R&M, Molex

Supply and Installation of Fiber Splice Closure Box support 6core fiber cable with fully cushioned splice holder containing grooves for fixing splice protection sleeves, Cable Spools made upof flame retardant plastic, high impact resistance, stackable design for providing sufficient room for storage of excess cables, Blanking plates, pigtail, etc. Including splicing charges

Supply and Installation of 1G Single Mode Duplex SFP module. Same make as switch

Supply & providing SC-LC/LC-LC Duplex patch cord 1 mtr. Approved Make: Actassi, Belden, Commscope, R&M, Molex

Supply and fixing ≥100mm x ≥50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required. Accessories including Cable Divider, External Angle 90°, Flat Angle 90°/TEE, Internal Angle 90°, Internal Coupler, Flat cross, End Cap, Flanged Coupler, Joint cover, Cable Retainer, Wall plate for internal angle etc. Preferred Make: OBO, MK, Legrand or equivalent

Supply and fixing of 20mm medium PVC ivory conduit/ oval conduit/ capping-n-casing with special confirming to ISI standard on surface/recess using suitable size fixtures spacing not exceeding 50cm including making good the damage colour washing etc as required Preferred Make: Toms, Balco, Espee or equivalent

Supply and fixing of 25mm medium PVC ivory conduit/ oval conduit/ capping-n-casing with special confirming to ISI standard on surface/recess using suitable size fixtures spacing not exceeding 50cm including making good the damage colour washing etc as required Preferred Make: Toms, Balco, Espee or equivalent

Supply and Fixing 1 Module PVC Box on surface Preferred Make: Molex, Legrand, D-Link or equivalent

Supply and Connecting 3Mtr CAT-6 Giga UTP patch cord with LSZH sheathing. Approved Make: Actassi, Belden, Commscope, R&M, Molex

Supply and Connecting 1Mtr CAT-6 Giga UTP patch cord with LSZH sheathing.. Approved Make: Actassi, Belden, Commscope, R&M, Molex

Supply and Installation of Manageable Wi-Fi Access points having following Specifications: Indoor Dual Band Wi-Fi Access Point with smoke detector appearance. Frequancy : 2.4GHz and 5GHz, Wireless Mode: 5 GHz 802.11ax 2x2 MIMO having minimum 1.2 Gbps and up to 1.7 Gbps wireless data rate, with Multi User MIMO support (Wi-Fi 6), 2.4 GHz 802.11ax 2x2 MIMO for up to 600 Mbps wireless data rate (Wi-Fi 6). Power over Ethernet (PoE), Antennas:internal. coverage and concurrent clients: up to 175mtr/256 clients as per environment condition. Standards& Certifications: FCC, CE, RCM, IC, Wi-Fi Alliance certified (WFA) 802.11ax, with (Wi-Fi 6), WPA2, WPA3 etc, MAC address filtering with access control,VLAN Support. including all accessories such as power adaptor, mounting kit, connecting CAT-6 patch cords as per site condition, etc. Preferred Make: Aruba, Cisco, Netgear,Grandstream or equivalent

Supply and Installation Gigabit PoE injector which fully conforms to the standard IEEE802.3 AT for transmitting power through Ethernet cable distance up to 100 meters. PoE budget: POE+ up to 30W. TransmissionRate:1000Mbps .Certifications:FCC,CE,RoHS, UL . Warranty for 3 years. Preferred Make: Allied Telsis, Tp-Link, Tenda,Ubiquiti, Aruba or equivalent

Supply and Installation of 19'', 9U, Network Rack with ACDB 6 port, cable manager, PDU etc. Preferred Make: D-Link, HCL, Netrack, President, Valrack or equivalent.

Supply and Installation of 19'', 12U, Network Rack with ACDB 6 port, cable manager, PDU etc. Preferred Make: D-Link, HCL, Netrack, President, Valrack or equivalent.

Dismantiling and Refixing of Existing switches,patch panels,network and telephone cables racks,information outlets etc.

Configuration, Testing, Commissioning, Documentation such as network and other cabling diagram ,labeling of Racks, information outlets & patchpanel and Training charges .

Part B -Common Annoucement PA System

Supply and Installation of Wall Mount Speaker Box for main Hall area, Annexe having following Specifications. Power Rating: 60W RMS/90W Max, Power Taps: 60/40/30/20/10W on 100V, Frequency Response: 50-20000Hz, SPL (1W/1m): 87dB,Impedance : 8Ohm Dim. (mm): W180xH248xD140 including all connecting and mounting Accessories. Preferred Make: AHUJA, Studiomaster or equivalent

Supply and Installation of Wall Mount Monitor Speaker Box having following Specifications. Power Rating:30W RMS/45W Max, Power Taps: 30/20/10W on 100V, Frequency Response: 50-20000Hz, SPL (1W/1m): 87dB,Impedance : 8Ohm Dim. (mm): W180xH248xD140 including all connecting and mounting Accessories. Preferred Make: AHUJA, Studiomaster or equivalent

Supply and Installation of Two Zone Power Amplifier having following Specifications. Power Output: (350W+350W) 350W RMS at 10%THD/500W RMS Max. For each zone, Input Channels: Stereo L/R 250 mV/47kOhm, Mic: 6xMic 0.65mV/4.7kOhm, Aux: 2xAux 100mV/470kOhm, Freq. Resp: 50-15000Hz +/-3dB, Tone Controls: Bass: +/- 10dB at 100Hz, Treble: +/- 10dB at 10kHz, Speaker Output: 4Ohm, 8Ohm, 70V & 100V for Each Zone, Built-in MP3 player with remote control,Bluetooth and LCD display for USB, SD/MMC card reader. Preferred Make: AHUJA, Studiomaster or equivalent

Supply and Installation of 18 inch Gooseneck condenser microphone and base with On/Off switch having Frequency Response: 80 to18,000 Hz,Output Connector:XLR(M) type,SPL: 125db.including all mounting and connecting acessories. Preferred Make: JTS,AKG or Equivalent.

Supply and Installation of Phantom Power having Compact & high quality 48 V DC Phantom Power Unit for Condenser Microphones, Balanced Gold Plated XLR input/output connection, Supplied with 18V Power Adapter, Compact & Light weight for easy portability, OEM Warranty Preferred Make: Studiomaster or Equivalent.

Supply and drawing 650/1100 V grade PVC insulated stranded single core 2.50 Sq. mm. 2 run copper conductor speaker cables (preferably red & black) conforming to IS 694 part I 1990 in the existing surface / recess conduit as required including giving necessary connections Preferred Make: Finolex, Havells or equivalent

Supply and Laying of 2 core Sheilded PVC Insulated Microphone Cable with Ultra low Capacitance 60 (Pf/m) ; Outer Jacket : PVC Matt; Working Temperature: 20 °C / +70 °C ; Diameter : 6.5mm; extremely flexible, laying through existing conduct.. Preferred Make: Belden, Klotz, Gotham or equivalent.

Supply and Installation of XLR Male and Female Connector Approved Make: Neutrik

Supply and Installation of good quality 3.5 mm Stereo / 2*RCA/ Mono phono connectors . Approved Make: Belden cable with Neutrik connectors.

Supply and Installation of ≥ 16 U Floor mount Audio Rack with rollers, door, with 5A x 5 Sockets and power distributor, internal wiring, cooling fan etc. Suitable sliding/ fixed trays for fixing Equipments such as Mixer, Amplifier and Wireless units with front glass/ door with lock and MS /Back Door openable. Preferred Make: D-Link, HCL, Netrack, President, Valrack or equivalent.

AUDIO SYSTEM AT AUDITORIUM

Supply, Installation and Commissioning of TEC approved ISDN compatible Digital IP enabled EPABX expandable up to 240 extensions initially equipped with 1)52 analog extensions 2) 2 Digital extensions 3) 6Trunk extensions 4) Operator console - 1 No 5) DID Facility, Mobile Extension Facility. 6) MDF with Disconnection module (Krone make) wired for ultimate capacity of the exchange with IPM protection module 7) IDF with disconnectiom module (Krone make) module wired for ultimate capacity of exchange. Preferred Make: Alcatel Lucent, Avaya, Coral, Digium, Fortivoice, Matrix, NEC, Panasonic or equivalent

Supply, Installation and commissioning of Caller ID phones (DTMF) with glass epoxy coated PCB 16 digit LCD display 30 incoming and 5 outgoing calls memory,Real-time clock with year, date and month display . Preferred Make: Beetel or equivalent

Supply, Installation and commissioning of Electronic push button DTMF telephone with glass epoxy coated PCB, , ringer volume adjust,LED for Ring Indication Preferred make: Beetel or equivalent

Supply and fixing of group A, 1 module face plate on the 1 module PVC box/existing CMS and fixing one RJ 11 telephone jack with shutter in the face plate.

Supply and Fixing 1 Module PVC Box on surface

Supply and fixing of door type junction boxes with lock and fitted with Krone make modules for 20 pair

Supply & Laying of 20 pair PVC Telephone cable of conductor size 0.5 mm ATC copper in the existing PVC conduits/ oval conduits/casing-n-capping etc as required. Preferred Make: RR Kabel, Finolex or equivalent

Supply & Laying of two pair PVC Telephone cable of conductor size 0.51 mm ATC copper in the existing PVC conduits/ oval conduits/ casing-n-capping etc as required Preferred Make: Finolex, RR Kabel or equivalent

Supply and fixing of 20mm medium metal conduit/corrugated or capping-n-casing with special confirming to ISI standard on surface/recess using suitable size fixtures spacing not exceeding 50cm including making good the damage colour washing etc as required Preferred Make: Toms, Balco, Espee or equivalent

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required

Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.

Syama Dynamic IT Services Pvt.Ltd