RKVY 2021-22 Land Development Work and Providing Irrigation at DAF Chelakkara

Amount

Construction of Open Well & Pump House

od434/2022_2023 : Earthwork open well excavation (above water) for wells of dia. above 3.5m and upto 6.0 m in all kinds of soil and conveying and depositing the spoil within initial lead of 50m and lift up to 1.5 m including neat banking.<br>For initial depth upto 1.50m

2.26.1 : Extra for every additional lift 1.5 m or part there of in excavation / banking excavated or stacked materials.All kinds of soil

2.7.1 : Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.Ordinary rock

2.7.2 : Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.Hard rock (requiring blasting)

2.26.2 : Extra for every additional lift 1.5 m or part there of in excavation / banking excavated or stacked materials.Ordinary or hard rock

2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

60.2.3 : Bailing out water using pump above 5 HP and Up to 10 HP-Bailing out water with engine and pump set above 5HP and up to 10HP, including conveyance to site and erection,cost of fuel, lubrication oil and other stores, pay of staff etc complete

60.7.1 : DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course masonry with good quality blasted rubble including packing to compactness to lines and levels cost and conveyance of all materials labour charges etc. complete as per direction of Departmental officers at site

2.27 : Supplying and filling in plinth with Jamuna sand under floors, including watering, ramming consolidating and dressing complete.

60.7.2 : DR PACKING Under foundation - Dry stone packing under foundation with good quality blasted rubble including conveyance of material and labour charges etc. complete as per direction of departmental officers at site.

7.1.1 : Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand)

5.1.3 : Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

5.9.6 : Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts

5.9.12 : Centering and shuttering including strutting, etc. and removal of form for:Well steining

5.9.5 : Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers

5.9.3 : Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform

5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

50.6.1.5 : Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete

od489/2022_2023 : Supplying and fitting Anjily wood battened shutters to suit the door frames already fixed, inclusive of labour charges for fixing all fittings but exclusive of cost of fittings etc. complete

od490/2022_2023 : Supplying and fixing cement concrete door frame of 0.9x2.10m size etc. complete

od491/2022_2023 : Supplying RCC Jally 60 X 45 cm or nearest size including all charges

50.10.2 : Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

13.7.2 : 12 mm cement plaster finished with a floating coat of neat cement of mix:1:4 ( 1 cement : 4 fine sand)

50.13.1 : 9 mm cement plastering of mix : 1:3 (1 cement : 3 fine sand ) including all cost of materials, labour charges etc complete

13.23.1 : Extra for plastering on circular work not exceeding 6 m in radius.In one coat

13.46.1 : Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Irrigation Works

od467/2022_2023 : 100.98.211<br>Supply of uPVC Pipe, IS 4985: 2000 , 6kg/cm2, 63mm Dia. including 5% for specials

od468/2022_2023 : (Approved KWA Data 100.9.6) Laying UPVC pipes of class 2 to class 6 and specials, lowering to the trenches already made, placing in position aligning the pipe line to the lines and levels and jointing the pipes and specials with solvent cement and testing the pipe line with water to the required test pressure (excluding cost of pipes and specials).<br>63 mm nominal outer dia pipes.

od474/2022_2023 : Supplying and Fitting Air Valve Assembly for 63 mm Pipe of approved make and quality as per the approval of the Engineer in Site.

od475/2022_2023 : Supplying and Fitting PVC Non-Return Valve 63 mm of approved make and quality as per the approval of Engineer in Site.

od476/2022_2023 : Supplying and Fitting PP Ball Valve 63mm of approved make and quality as per the approval of Engineer in Site.

od469/2022_2023 : 100.98.210<br>Supply of uPVC Pipe, IS 4985: 2000 , 6kg/cm2, 50mm Dia. including 5% for Specials

od470/2022_2023 : (Approved KWA Data 100.9.5) Laying UPVC pipes of class 2 to class 6 and specials, lowering to the trenches already made, placing in position aligning the pipe line to the lines and levels and jointing the pipes and specials with solvent cement and testing the pipe line with water to the required test pressure (excluding cost of pipes and specials)<br>50 mm nominal outer dia pipes.

od477/2022_2023 : Supplying and Fitting Air Valve Assembly for 50 mm Pipe of approved make and quality as per the approval of the Engineer in Site.

od478/2022_2023 : Supplying and Fitting PP Flush Valve 50mm of approved make and quality as per the approval of Engineer in Site.

od479/2022_2023 : Supplying and Fitting PP Ball Valve 50mm of approved make and quality as per the approval of Engineer in Site.

od471/2022_2023 : 100.98.209<br>Supply of uPVC Pipe, IS 4985: 2000 , 6kg/cm2, 40mm Dia. including 5% for specials

od472/2022_2023 : (Approved KWA Data 100.9.4) Laying UPVC pipes of class 2 to class 6 and specials, lowering to the trenches already made, placing in position aligning the pipe line to the lines and levels and jointing the pipes and specials with solvent cement and testing the pipe line with water to the required test pressure (excluding cost of pipes and specials).<br>40 mm nominal outer dia pipes.

od480/2022_2023 : Supplying and Fitting PP Flush Valve 40mm of approved make and quality as per the approval of Engineer in Site.

od481/2022_2023 : Supplying and Fitting PP Ball Valve 40mm of approved make and quality as per the approval of Engineer in Site.

od473/2022_2023 : 100.98.231<br>Supply of uPVC Pipe, IS 4985: 2000 , 10kg/cm2, 32mm Dia. including 5% for specials

od482/2022_2023 : Supplying and Fitting PP Air Valve 32 mm of approved make and quality as per the approval of Engineer in Site.

od483/2022_2023 : Supplying and Fitting Disc Filter 30 Cum 63 mm of approved make and quality as per the approval of the Engineer in Site.

od484/2022_2023 : Supplying and Fitting By-Pass Assembly 2.5"X2" of approved make and quality as per the approval of the Engineer in Site.

od485/2022_2023 : Supplying and Fitting Fertilizer Tank 60 L of approved make and quality as per the approval of the Engineer in Site.

od486/2022_2023 : Supplying and Fitting Plastic Impact Sprinklers (25-30 LPM) of approved make and quality as per the approval of the Engineer in Site.

2.10.1.1 : Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil. and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m:All kinds of soilPipes, cables etc, not exceeding 80 mm dia

od487/2022_2023 : Supplying and installation of 5 HP 65x50mm centrifugal monoblock Open Well Submersible Electric Motor Pump Set (head 24 - 45 m, discharge 3 - 12 lps) or nearest available size with five star rating of reputed make (like Kirloskar, Cromption, Havells), including all accessories and sundries for installation and fitting, conveyance and installation charges etc. complete.

od488/2022_2023 : Supplying and fixing Ready Made Smart Controller suitable for 3 Phase 5 HP electric motor and pump set including in-built anti theft protection, Dry Run, Locked Rotor and Short Circuit protection,Voltage and current based protection fo all faults With Line Voltage, Phase Current, Power Factor, Power, Energy metering and total run time information of the pump, Complete operation through mobile interface with DOL starter.The wiring diagram prepared by a registered wireman should be submitted for KSEB connection purposes.

Land Development Works

2.6.1 : Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil

50.2.26.1 : Filling with contractor own earth (excluding rock) in open areas in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge.

Emil Joy

Sheejomon Mathew

SHINE SUNNY

Bidder Name

Sheejomon Mathew

M A ABDULLAKUTTY

SHINE SUNNY

Emil Joy