REPAIRS REPLACEMENT OF FLOORING DADO WOODEN AND ALUMINIUM JOINERY TOILETS AND CERTAIN MISCELLANEOUS WORKS AT INHS KALYANI UNDER GE NB VISAKAHAPATNAM

Amount

Demolition of un-reinforced cement concrete in any floors and in any position not otherwise specifically provided for and disposal of unserviceable materials, debris and rubbish to out side MD land complete all as specified and as directed.

Demolition of floor, hearth and wall tiles / stone slabs of any description or thickness as in floors, skirtings etc laid bedded and pointed in any mortar and removal of rubbish to out side MD land complete all as specified and as directed.

Taking down Cement Plaster of any description on brick or stone walls or concrete surfaces including raking out joints, hacking for key, scrubbing down with water etc and removal of rubbish to out side MD land complete all as specified and as directed.

Demolition of brick work or stone / boulder masonry, built in cement mortar including all quoins, pillars etc., and disposal off unserviceable materials, debris to out side MD land complete all as specified and as directed.

Demolition of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided for, and disposal off debris and rubbish to out side MD land complete all as specified and as directed

M & L for Rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:3 and finished even and smooth without using extra cement including mixing of water proofing compound wherever required complete all as specified and as directed. NOTE : water proofing compound shall be measured and paid separately under relevant item.

M & L for preparing surfaces of sunken floor and applying a coat of Brush bond of M/s Fosroc Chemicals or equivalent approved water proofing coating as per manufacturer's instructions complete all as required and as directed.

Treatment by injecting / grouting cement slurry mixed with Conbextra EP 10 (Epoxy resin injection grout) of M/s Fosroc Chemicals or equivalent approved chemical in to sunken slabs of toilet by drilling holes at an interval not more than 1 M c/c to a depth of 60 mm and 20 mm diameter and grouting the slurry by mechanical means with required pressure complete all as per technical specifications and as required at site up to 7th Storey complete all as specified and directed.

M&L for Plain Cement Concrete Type E2 1:5:10 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed.

M&L for 75mm thick Plain Cement Concrete 1:4:8 Type D-2 (using 40mm graded aggregates) as in subfloors, sub-bases, floors and pavings etc complete all as specified and as directed.

M & L for 25mm thick, PCC 1:2:4, Type B1, using (20mm graded aggregate) as in sub base of flooring complete all as specified and as directed.

M&L for Non Skid ceramic tiles 7 to 8 mm thick ( square / rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including and over screed bed or bedding layer in cement mortar 1:4, 15 mm thick complete all as specified and as directed. Make : Johnson / Kajaria / Orient / Cera / Asian

M&L for Non Skid ceramic tiles 7 to 8 mm thick ( square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in vertical surfaces such as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including and over screed bed or bedding layer in cement mortar 1:4, 15 mm thick complete all as specified and as directed. Make : Johnson / Kajaria / Orient / Cera / Asian

M&L for Non Skid ceramic tiles 7 to 8 mm thick ( square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in vertical surfaces such as Skirting / dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including and backing coat in cement mortar 1:3, 10 mm thick complete all as specified and as directed. Make : Johnson / Kajaria / Orient / Cera / Asian

M&L for Non Skid ceramic tiles 7 to 8 mm thick ( square / rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in vertical surfaces such as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including and over screed bed or bedding layer in cement mortar 1:4, 15 mm thick complete all as specified and as directed. Make : Johnson / Kajaria / Orient / Cera / Asian

M&L for Non Skid ceramic tiles 7 to 8 mm thick ( square / rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in vertical surfaces such as Skirting / dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including and backing coat in cement mortar 1:3, 10 mm thick complete all as specified and as directed. Make : Johnson / Kajaria / Orient / Cera / Asian

M&L for Vitrified Ceramic tiles light shade 10 mm thick (square / rectangular) polished, area of each tile not exceeding 0.36 sqm, as in floors etc set & jointed in neat cement slurry & pointed in white or coloured cement to match including screed bed or bedding layer in cement mortar 1:4, 15 mm thick complete all as specified and as directed. Make : Johnson / Nitco / Asian Granito / Varmora

M&L for Vitrified Ceramic tiles light shade 10 mm thick (square / rectangular) polished, area of each tile not exceeding 0.36 sqm, as in in vertical surfaces such as Skirting / dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including and backing coat in cement mortar 1:3, 10 mm thick complete all as specified and as directed. Make : Johnson / Kajaria / Orient / Cera / Asian

M&L for Coloured Glazed ceramic tiles concept pattern 450 x 300 x 7mm thick, on vertical surfaces such as skirting, dados and risers to steps etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match including rendering 10 mm thick on fair faces of brick work or concrete surfaces as in backing coat in cement mortar 1:3 for complete all as specified and as directed. Make : Johnson / Kajaria / Orient / Cera / Asian

M&L for coloured glazed ceramic tiles 300 x 200 x 7 mm thick on vetical surfaces such as dados etc set and jointed in neat cement slurry and pointed in white or Coloured cement to match including rendering 10 mm thick on fair faces of brick work or concrete surfaces as in backing coat in cement mortar 1:3 for complete all as specified and as directed. Make : Johnson / Kajaria / Orient / Cera / Asian

M & L for 18 to 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigments to match with the shade of granite and moulding of exposed edges incl polishing including and over screed bed or bedding layer in cement mortar 1:4, 15 mm thick complete all as specified and as directed.

M & L for Granite (of any type) tiles 20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of stone in floorings including cutting and polishing of tiles including and over screed bed or bedding layer in cement mortar 1:4, 15 mm thick complete all as specified and as directed.

M & L for Granite (of any type) tiles 18mm to 20 mm thick machine cut in skirting / dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of stone including cutting and polishing of tiles including screed bed or bedding layer in cement mortar 1:3, 10 mm thick complete all as specified and as directed.

Material and Labour for Brick work with fly ash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed.

Material and Labour for Brick work with fly ash bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 including provision of 2Nos 8mm dia TMT bars at every fourth course complete all as specified and as directed

Supply only Integral water proofing compound

Use and waste of form work to sides and soffits of lintels, shelves including supports etc. fair finished flat complete all as specified and as directed.

M&L for Reinforced Cement Concrete Type A1 1:11/2:3 (using 20 mm graded stone aggregate) for shelves and the like complete all as specified and as directed.

M&L for TMT reinforcement steel bars 10 mm dia and over., cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and as directed.

M&L for rendering 15 mm thick on stone masonry surfaces or surfaces other than fair faces of brick work or on one side of lathing in cement mortar 1:4 including mixing water proofing compound and finished smooth and even without using extra cement complete all as specified and as directed.

Rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified and as directed.

Rendering 5 mm thick on fair faces of concrete surfaces in ceilings in cement mortar 1:3 and finished even and smooth without using extra cement complete all as specified and as directed.

M&L for Preparing newly plastered surfaces of ceilings and applying three coats of white wash complete all as specified and as directed.

M&L for preparing newly plastered surfaces of internal walls and applying two coats of oil bound distemper over one coat of alkali resistant primer complete all as specified and as directed. Make for Distemper : Asian / Nerolac / Berger ( All 1st quality)

Preparation of old surfaces of walls by brooming down or by steel wire brushing and applying two coats of white wash complete all as specified and as directed.

Preparation of old surfaces of ceilings by brooming down or by steel wire brushing and applying two coats of white wash complete all as specified and as directed.

M & L for complete removal of existing treatment on walls, preparation of wall surfaces and applying two coats of putty including sand papering on external walls / ceiling surfaces to obtain smooth finish complete all as specified and as directed. (i) Make for Putty : JK white cement / Birla wall care / Jenson & Nicholson

M & L for preparation of new / old wall surfaces and applying two coats of weather proof Acrylic Exterior emulsion paint of approved make and shade over a coat of approved primer as recommended by the manufacturer complete all as specified and as directed. Make : (i) Weather coat paint :Apex from Asian Paints or equivalent in All Guard from Berger, Weather Shield Max Exterior Acrylic from ICI Dulux

M & L for preparing the plastered surfaces of walls and applying two coats of Plastic emulsion paint over primer complete all as specified and as directed. Make for Plastic Emulsion paint : Asian / Nerolac / Berger ( All 1st quality)

M&L for preparation of old painted wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. Make :M/s. Asian Paints [Apcolite], M/s. Berger Paints [Luxol], Jenson & Nicholson [Brolac] all are 1st quality

M&L for Preparation of old painted steel surfaces of any description, over 10cm in width or grith, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed. Make :M/s. Asian Paints [Apcolite], M/s. Berger Paints [Luxol], Jenson & Nicholson [Brolac] all are 1st quality

M & L for preparation of new or old wooden/ ply wood surfaces, filling the holes with necessary wood filler and applying three or more coats of melamine polish to achieve smooth and glossy surface complete all as required and as directed. Make : Sheenlac / Naidu Polish / M/s. Asian Paints / Berger Paints

M & L for removing the plants from the surfaces of the building with complete roots, applying recommended chemical to prevent further growth as directed, making good the disturbed surface with cement mortar 1:3 and applying the same surface finish of the existing surface and finished to match with the surrounding surfaces including removal of debris etc., out side the premises complete all as required and as directed.

Taking down chowkats or frames exceeding 1.5 sqm but not exceeding 4sqm each with shutters without taking off shutters from frame complete all as specified and as directed.

Taking down shutters of any description exceeding 1 sqm and not exceeding 2 sqm each complete all as specified and as directed.

Taking down shutters (wooden) of any description exceeding1 Sq.M but not exc. 2 Sq. M each and including re-fixing in same opening after carrying out neceessary repairs complete all as specified and as directed.

Taking down Chowkats or frames n.exc 1.5 sq. m each with shutters (without taking off shutters from the frame) complete all as specified and as directed.

Taking down shutters of any description not exceeding 1.0sq.m. each complete all as specified and as directed.

Taking down shutters of any description not exceeding 1 Sq. M each and refixing in the same positions after making good complete all as specified and as directed.

S&F first class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

S&F second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

S & F in opening Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube manufactured as per SSR Part I specifications and drawing complete all as specified and as directed.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip if 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bootom rail on either side & as gap insert for top rail and bottom rail ; Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles. & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling and fixing in the frame at site as per specification & drawing complete all as specified and as directed. Note for Item No. 52 & 53 : Make of PVC frame / shutter / ventilator shall be of make Sintex or equivalent in Nandi / Rajshri Plasti Wood.

S & F 35 mm thick, Factory Made Second Class Hard Wood, Kiln Seasoned and chemically pressure treated plain framed, panelled shutter [Two Panel] with lock rail and panel of 9 mm BWP Commercial ply or 12 mm veneered particle board with commercial face veneers on both faces complete all as specified and as directed.

S&F 35 mm Flush shutters [ISI marked], solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S & F 30 mm thick Factory Made Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc. The sizes of members of shutters shall be as specified in SSR Part I, Section 8, Clause 8.24 (a) complete all as specified and as directed.

S & F Mild steel sections in supports for stiffening of fencing, wall ties, hold fasts, clamps, plain angle cleats for securing purlins and similar small articles confirming to Fe 290 Gde E-165 complete all as specified and as directed.

S & F Collapsible steel gates, top hung consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with hold fasts and brackets, complete including taking down the existing one complete all as specified and as directed.

M&L for Plain / Reinforced Cement Concrete Type B1 1:2:4 (using 20 mm graded stone aggregate) cast in situ in lintels up to 1.5 M span, cills and other similar bands, plinth courses, parapets, copings, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating as directed including use and waste of form work complete all as specified and as directed.

S & F Aluminium alloy anodised Sliding Door Bolt (ISI Marked) with hasp and staple [Bolt Type] of size 300 mm and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of work up to 16th storey complete all as specified and as directed.

S & F 125mm long medium weight Stainless Steel Butt hinges complete all as specified and as directed.

S & F 100mm long medium weight Stainless Steel Butt hinges complete all as specified and as directed.

S & F 125mm long [ ISI marked ] extruded Aluminium alloy anodised Butt hinges with galvanized mild steel hinge pin type B21complete all as specified and as directed.

S & F [ISI marked] Aluminium anodised barrel Tower Bolt (ISI Marked) of size 150 mm long of extruded section complete all as specified and as directed.

S & F [ISI marked] 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

S & F Stainless Steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with Stainless steel wire staples complete all as specified and as directed.

S & F in repairs Stainless Steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and indcluding taking down the existing mesh and fixing new wire cloth with old beading / fixed with Stainless steel wire staples complete all as specified and as directed.

S & F Beads, I st class hard wood, wrought, straight ( any size ) for glazed or gauzed joinery renewed including mitres etc. complete all as specified and as directed.

S & F 0.71 mm thick plain Aluminium sheeting, Alloy 31000 H4 in drip and straight flashing and in coverings of crumple section and door faces etc. complete all as specified and as directed.

M & L Removing loose material from existing crumple joints and Preparing the Groove with "NITO BOND SBR" mixed in Cement and Mortar 02 Ltrs per Bag of Cement grove size of 25 mm X 10 mm, including filling with poly supplied sealant "THIOFLEX 600" two part component of Fosroc Chemicals or equivalent Product complete all as specified and as directed.

S&F floor door stopper, aluminium alloy body and tongue anodised with hard drawn steel spring of 140mm size overall complete all as specified and as directed.

S&F aluminium powder coated decorative type curtain rod 20mm dia as in repair complete all as specified and as directed.

S & F 4 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sq. M in each pane complete all as specified and as directed. Make: Saint Gobain / Modi Guard / Asahi

S & F Gate and Shutter, Hooks and Eyes of 150 mm size, of Aluminium plate Type II complete all as specified and as directed.

S & F aluminium powder coated brackets suitable for 20mm dia curtain rod (minimum projection from wall 75mm) fixed in wall including drilling, rawl plug, screws etc complete all as specified and directed.

M&L for preparation of new wood and wooden based surfaces of any description , over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. Make :M/s. Asian Paints [Apcolite], M/s. Berger Paints [Luxol], Jenson & Nicholson [Brolac] all are 1st quality.

S & F PVC solid ventilator frame size 55 X 47mm with wall thickness of 5mm made out of extruded 5mm PVC sheet, mitre cut at two comers and jointed with 2 Nos of 150mm long brackets of 15 x 15mm MS square tube the two vatted profiles are to be reinforced with 19 x 19mm MS squre tube the 50% of bottom portion is fixed with 4mm pin headed glass and balance 50% of top portion is fixed with 4mm thick pin headed glass lowers and cover with 0.36mm dia stainless steel wire mesh at top portion including necessary PVC beading with screws and 3 Nos 12mm dia MS guard, bars fixed in ventilator frame including two coats of synthetic enamel paint over a coat of red oxide primer to MS guard bars etc all as per specified and as directed. Make SINTEX / NANDI / RAJSHREE

M & L for Factory made PVC Ventilator made out of Multi Chamber PVC hallow section DWUF 405 (40 x 46 mm) as frame, 3 mm thick Pin headed glass fixed to the frame in the lower section using extruded PVC Section of 9 x 1.5 mm size GL 19 with EPDM gasket (SPL - 003) for both PVC sections. Ventilator center mullion shall be made up of DWUF - 406 complete all as specified and as directed. Make SINTEX / NANDI / RAJSHREE

M&L for Powder coated aluminium frame for doors, windows / ventilators and partitions etc., with one or more rebates with powder coating of minimum 50 micron thick including joining cleat for fixing etc., complete all as specified and as directed. Make: HINDALCO / INDALCO/JINDAL

M&L Powder coated aluminium window / ventilator shutters, side hung / sliding type, without sash bars, aluminium sections weighing 0.55 kg/m, with jointing cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinges type B-21 of 100mm long (2 no.), suitable handle (1no.), complete all as specified and as directed. Make: HINDALCO / INDALCO/JINDAL

M&L Powder coated aluminium window / ventilator shutters, fixed type without sash bar, aluminum section weighing 0.55 Kg/ RM including necessary joining cleats, glazing clips, rubber packing, anodised aluminum snap beading, screws etc., complete all as specified and as directed. Make: HINDALCO / INDALCO/JINDAL

S & F 4 mm thick Sheet glass, ordinary quality fixed to aluminium windows in squares exceeding 0.5 Sq. M in each pane complete all as specified and as directed. Make: Saint Gobain / Modi Guard / Asahi

Hacking out old broken glass (any thickness, size, quality or description) from wooden or metal frames glazed with putty or fixed with beads complete all as specified and as directed .

S&F solar control film 25 microns thick, reflective type (Gareware Sun Control or equivalent) complete all as specified and as directed.

S&F 5mm thick Aluminium Composite panel (ACP) fixed in aluminium sections in squares exceeding 0.5 Sqm complete all as specified and as directed.

M&L for 12 mm thick Prelaminated particle board, exterior grade, prelaminated both sides with decorative choice lamination fixed with screws to timber frame work complete all as specified and as directed.

S&F 7 mm thick powder coated anodised aluminium deco grill DG-104, including joining cleat for fixing with suitable aluminium channnel and necessary fixing arrangements as required, complete all as specified. Make: HINDALCO / INDALCO/JINDAL

S & F in repairs Double Action Floor Spring Hydraulically Regulated made of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and as directed. Make : Godrej / Ozone / Kelvin

S&F Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed, made of aluminium extruded section body complete all as specified and as directed. Make : Everite / Priya / Godrej

Dismantling wall and ceiling boards (fiber, pulp, insulation etc.) or insulation boards/ slabs/ blankets any thickness, including cover fillets / taking down frame work complete all as specified and as directed.

S & F Aluminium anodised snap grid frame work for false ceiling of grid size 605 x 605 mm with Aluminium "T" section of size 38 x 25 x 1.50 mm thick for main runners, 25 x 25 x 1.5 mm thick for cross runners and angle of size 25 x 25 x 1.50 mm thick along the walls suspended with and including 4 mm dia., Galvanized mild steel wire (as in suspenders of ceiling members fixed in proper position) including providing and fixing Gypsum Board 12 mm thick in ceiling fixed with screws as per manufacturer's instructions and applying two coats of plastic emulsion paint over a coat of primer over two coats of putty including sand papering till obtaining smooth finish complete all as specified and as directed. Make of Gypsum board

M&L for false ceiling grid comprising of GI perimeter channel of size 20x28x30x0.5mm thick fixed to walls, main supporting section of 80x26x51x0.5mm and cross supporting channel of 15x45x15x0.9mm and suspension angle of 25x10x0.5mm fixed to RCC slab with rawl plugs and expandable fastners of size 38x12mm complete to require shape and design all as per mfr instructions for 1200x600 grid size including providing and fixing Gypsum Board 12 mm thick in ceiling fixed with screws as per manufacturer's instructions and applying two coats of plastic emulsion paint over a coat of primer over two coats of putty including sand papering till obtaining smooth finish complete all as specified and as directed. Make of Gypsum board : Saint Gobain or equivalent as approved by accepting officer

M & L for providing and fixing Gypsum Board design cornices, cove light beadings and vertical design pieces n exc 0.20m width or height, etc fixed with screws as per manufacturer's instructions complete all as specified and as directed.

M&L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exceeding 10 cm girth in brick walls complete all as specified and as directed.

Taking up or down 15 mm bore steel tubing and connections, complete all as specified and as directed.

Taking up or down 20 mm bore steel tubing and connections, complete all as specified and as directed.

Taking up or down 25 to 32mm bore steel tubing and connections, complete all as specified and as directed.

Taking up or down 40 to 50mm bore steel tubing and connections, complete all as specified and as directed.

Taking up or down 80mm bore steel tubing and connections, complete all as specified and as directed.

S & F 15mm bore Galvanized Steel tubes, medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and as directed. Make : Tata / Zenith / Jindal

S&F 20mm bore 3 layer PPR Polypropylene random copolymer pipes SDR 7.4 & SDR 11 UV stabilized and anti microbial welded having thermal stability for hot and cold water supply including all PPR plain brass threaded polypropyiene random fittings fixed complete to walls ceilings or in floors complete all as specified and as directed. Make : SFMC / CENLUB / VECTOUS

S & F 20 mm bore Galvanized Steel tubes, medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and as directed. Make : Tata / Zenith / Jindal

S&F 25mm bore 3 layer PPR Polypropylene random copolymer pipes SDR 7.4 & SDR 11 UV stabilized and anti microbial welded having thermal stability for hot and cold water supply including all PPR plain brass threaded polypropyiene random fittings fixed complete to walls ceilings or in floors complete all as specified and as directed. Make : SFMC / CENLUB / VECTOUS

Refixing old steel tubing of 15 mm bore and connections in new or old position (walls, ceilings, floors etc) complete all as specified and as directed.

Refixing old steel tubing of 20 mm bore and connections in new or old position (walls, ceilings, floors etc) complete all as specified and as directed.

S & F 25mm bore Galvanized Steel tubes, medium grade with all fittings and fixed complete to walls and ceiling or laid in floors / trenches complete all as specified and as directed. Make : Tata / Zenith / Jindal

S&F 32mm bore 3 layer PPR Polypropylene random copolymer pipes SDR 7.4 & SDR 11 UV stabilized and anti microbial welded having thermal stability for hot and cold water supply including all PPR plain brass threaded polypropyiene random fittings fixed complete to walls ceilings or in floors complete all as specified and as directed. Make : SFMC / CENLUB / VECTOUS

S & F 40mm bore Galvanized Steel tubes, medium grade with all fittings and fixed complete to walls and ceiling or laid in floors / trenches complete all as specified and as directed. Make : Tata / Zenith / Jindal

S&F 40mm bore 3 layer PPR Polypropylene random copolymer pipes SDR 7.4 & SDR 11 UV stabilized and anti microbial welded having thermal stability for hot and cold water supply including all PPR plain brass threaded polypropyiene random fittings fixed complete to walls ceilings or in floors complete all as specified and as directed. Make : SFMC / CENLUB / VECTOUS

S & F 50mm bore Galvanized Steel tubes, medium grade with all fittings and fixed complete to walls and ceiling or laid in floors / trenches complete all as specified and as directed. Make : Tata / Zenith / Jindal

S & F 80mm bore Galvanized Steel tubes, medium grade with all fittings and fixed complete to walls and ceiling or laid in floors / trenches including taking down complete all as specified and as directed. Make : Tata / Zenith / Jindal

S & F in repairs 25 mm bore Gun Metal, globe or Gate Valve with Iron wheel head Screwed both ends for Iron Pipe and fixed including taking down old existing complete all as specified and as directed. Make: Kirloskar / L & T / Upadhyay / Leader / Zoloto

S & F in repairs 40 mm bore Gun Metal, globe or Gate Valve with Iron wheel head Screwed both ends for Iron Pipe and fixed including taking down old existing complete all as specified and as directed. Make: Kirloskar / L & T / Upadhyay / Leader / Zoloto

S & F in repairs 50 mm bore Gun Metal, globe or Gate Valve with Iron wheel head Screwed both ends for Iron Pipe and fixed including taking down old existing complete all as specified and as directed. Make: Kirloskar / L & T / Upadhyay / Leader / Zoloto

S & F in repairs Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm size with 15 mm bore pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and 32 mm dia., Waste fittings, brass chromium plated for glazed ware sinks, wash basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed including removing the existing Basin, pillar tap and brackets and fixing new brackets complete all as specified and as directed.

S & F Stainless steel tubular towel rail, 20 mm dia., D Type, 60 cm long between flanges complete all as specified and as directed.

S & F in repairs Vitreous Ware wash down water closet (Pedestal), white (ETWC) and 10 litres PVC capacity valve less, Syphonic action type, Flushing cistern, low level, white with inlet, ball valve, float and handle including brackets (SLIM LINE or equivalent) including PVC Flush pipe 32 mm dia., Plastic seat of same colour of WC, closed pattern with flat bottom, and cover and Mild steel chromium plated hinging device complete including taking down the existing fitting complete all as specified and as directed.

Supply & Fix in repairs Vitreous China Squatting pan of Orissa pattern long pan, size 580 mm x 440mm white with `P' or `S' trap, front or back inlet and foot rests any pattern including connection to trap and to flushing pipe, anti-syphonage pipe etc., including trap set in lime concrete 1:2:5 minimum 150 mm thick all round and finished just below level of rim of pan to receive the floor finishing complete all as specified and as directed. Make for item No. 117, 119 and 120 :M/s. Parry ware / M/s. Hindusthan Sanitary ware & Industries Ltd / M/s. Neycer Kemberg / M/s Cera ( All are 1st quality)

S & F 10 Liters capacity, low level flushing cistern, PVC, white, with inlet ball valve, float, handle, flush pipe of polyethylene of low or high density of PVC 32mm bore waste pipe, including brackets and connections to pipe of complete all as specified and as directed. Make : SLIMLINE [ Parryware ] / CERA / Hindware

S & F in repairs 15 mm bore Fancy type Chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule including taking down the existing fitting complete all as specified and as directed. Make : M/s Leader, M/s Zenith, M/s Crescent

S & F in repairs Fancy type chromium plated 15 mm bore Angle/ plain Stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions including taking down the existing fitting complete all as specified and as directed. Make : M/s Leader, M/s Zenith, M/s Crescent

S&F in repairs 15mm bore pillar taps fancy type, Swan neck cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed. M/s Hindware / Orient / Seiko / Dripless

S & F PVC connections 15 mm bore with PTMT nuts of length 450 mm complete all as specified and as directed. MAKE : M/S PRAYAG, M/S POLY TUF

Taking down soil, waste and rain water pipes (any size or pattern) including all fittings, heads, shoes. Bends, swan-necks etc.,complete all as specified and as directed.

S & F 75 mm bore Cast Iron Spun pipes, Soil, waste and vent pipes in any length with or without ears, with cement joints in CM 1:1,laid in floors or trenches complete all as specified and as directed.

S & F 100 mm bore Cast Iron sanitary connection short connections pipe of length up to 300 mm jointing with cement joints in CM 1:1,fixed to walls complete all as specified and as directed.

S & F 75 mm bore Cast Iron Spun pipes, Soil, waste and vent pipes in any length with or without ears, with cement joints in CM 1:1,fixed to walls complete all as specified and as directed.

S&F 100mm dia Cast iron soil, waste and vent pipes in any length sand cast (ISI Marked) with or without ears, with cement joints but fixed to walls complete all as specified and as directed.

S&F 100 mm Bends (any radius), diminishing pieces or tapers (larger bore measured) with ovel access door complete all as specified and as directed.

S&F 75 mm Bends (any radius), diminishing pieces or tapers (larger bore measured) with ovel access door complete all as specified and as directed.

S & F 100 mm dia., Cast Iron Branch pieces ("T" or "Y"), Single (equal or unequal), ordinary or inverted (spigot or socketed type) or with parallel branches with oval access door complete all as specified and as directed.

S & F Cast Iron Nahani trap of 75 mm outlet with grating including jointing to waste pipe fixed in cement concrete Type B1 1:2:4 complete all as specified and as directed.

Jointing only 75 mm dia., Cast Iron pipes and fittings or AC pipes and fittings, in repairs, with cement joints in CM 1:1 including hacking out old cement joint complete all as specified and as directed.

Jointing only 100 mm dia., Cast Iron pipes and fittings or AC pipes and fittings, in repairs, with cement joints in CM 1:1 including hacking out old cement joint complete all as specified and as directed.

Jointing only 150 mm dia., Cast Iron pipes and fittings or AC pipes and fittings, in repairs, with cement joints in CM 1:1 including hacking out old cement joint complete all as specified and as directed.

Dismantling of existing CI/PVC soil and waste pipe 100mm dia including fittings,viz, bends , tee from walls upto height of 15mtrs complete all as specified and as directed.

Dismantling of existingCI/PVC soil and waste pipe 75mm dia including fittings,viz, bends , tee from walls upto height of 15mtrs complete all as specified and as directed.

S & F Cast iron traps 'P' or 'S' 100mm dia complete all as specified and as directed.

S&F Cast iron cowls of 100mm dia complete all as specified and as directed.

S&F Cast iron 75 mm Bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and as directed.

Taking down eaves gutters and PVC rain water pipes (of any or pattern) including all fittings, heads, shoes, bends, swan-necks, etc., (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed.

S &F 110mm bore PVC (SWR) rain water / soil, waste and vent pipes single socked in any length with rubber ring joints fixed to walls / laid in floors complete all as specified and as directed. Make : Supreme / Prince / Infra

S&F 110mm bore PVC (SWR) bends of any radius complete all as specified and as directed. Make : Supreme / Prince / Infra

S&F 110mm PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and as directed. Make : Supreme / Prince / Infra

S &F 75mm bore PVC (SWR) Rain water / soil, waste and vent pipes single socked in any length with rubber ring joints fixed to walls / laid in floors complete all as specified and as directed. Make : Supreme / Prince / Infra

S&F 75mm bore PVC (SWR) bends of any radius complete all as specified and as directed. Make : Supreme / Prince / Infra

S&F 75 mm PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and as directed. Make : Supreme / Prince / Infra

M&L for 75mm bore PVC floor trap with grating incl jointing to waste pipe fixed in cement concrete B1 (1:2:4) complete all as specified and as directed.

Removing the existing tretment from the roof,Roughening surfaces of old concrete floor or concrete surfaces by picking, sweeping clean and washing down with water to remove dust etc in multistoreyed bldgs, M&L for brushing neat cement slurry with 3 Kg of cement per Sqm, Rendering 10 mm thick on fair faces of concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement including mixing of water proofing compound @ 2% by weight of cement, provn of APP polymeric waterproofing membrane of 3 Kg / Sq.M in corporating a centre core of 90 micron thick HMHDPE film including coating the surface with a coat of water based bitumenous Primer @ 100 gms / Sqm, followed by a coat of blown bitumen of grade 85 / 25 or 90 / 15 @ 1.2 Kg / Sq.M each at top and bottom of the membrane followed by a coat of bitumenous aluminium paint @ 0.50 lit / sqm complete including sealing all joints by thermo fusion with minimum 10cm overlap and on vertical surface the membrane shall be inserted in grooves and packed in CM(1:3) all as per manufacturers instructions on non accessible roofs including removing debris to out side MD land complete all as specified and as directed. Make of membrane: M/S HYPERPLAS IWL CHENNAI LTD, M/S MULTIPLAS BY STP TEXES LIMITTED, GOREGOAN, M/S STP SUPERIOR POLY PLUS BY STP LIMITED, KOLKATTA, M/S SHIVAM TAR PRODUCTS Note : Water proofing compound shall be measured and paid separately under relavent item

M&L for filletting in any position and to any shape in cement mortar 1:4 incuding all mitres,stops etc not exceeding 25 Sqcm section of fillet complete all as specified and as directed.

Supply and Fix 500 litres capacity Rotational moulded Polythene [HDPE] Water Tanks, [ ISI Marked ] double layered, Cylindrical & Vertical Type including provision of 20mm dia spouts for connecting inlet, outlet, over flow and washout pipes hoisted and fixed in position complete all as specified and as directed. Make : M/s SINTEX , M/s POLYCON, M/s ROTEX, M/s POLY WELL

S&F 1000 litres capacity Rotational moulded Polythene [HDPE] Water Tanks, [ ISI Marked ] double layered, Cylindrical & Vertical Type hoisted and fixed in position including provision of 40mm / 25mm dia spouts for connecting inlet, outlet, over flow and washout pipes fixed in position all as specified in SSR Part I complete all as specified and as directed. Make : M/s SINTEX , M/s POLYCON, M/s ROTEX, M/s POLY WELL

S&F 2000 litres capacity Rotational moulded Polythene [HDPE] Water Tanks, [ ISI Marked ] double layered, Cylindrical & Vertical Type hoisted and fixed in position including provision of 40mm / 25mm dia spouts for connecting inlet, outlet, over flow and washout pipes fixed in position all as specified in SSR Part I complete all as specified and as directed. Make : M/s SINTEX , M/s POLYCON, M/s ROTEX, M/s POLY WELL

S & F in repairs, Ball Brass Valve, suitable for 15 mm bore pipe, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule complete all as specified and as directed.

S&F float valve of PVC 20mm dia high pressure with polythene float and fly nut complete screwed for iron pipe and fixed in repairs complete all as specified and as directed. Make : Prayag

M & L for Cleaning and removing all scale and dirt, etc., from tanks of capacity exceeding 250 Litres but not exceeding 500 litres including disconnecting existing tank, setting aisde or lowering if required ,reconnecting and re fixing in position complete all as specified and as directed.

M & L for Cleaning and removing all scale and dirt, etc., from tanks of capacity exceeding 500 Litres but not exceeding 1000 litres including disconnecting existing tank, setting aisde or lowering if required ,reconnecting and re fixing in position complete all as specified and as directed.

M & L for Cleaning and removing all scale and dirt, etc., from tanks of capacity exceeding 1000 Litres but not exceeding 2000 litres including disconnecting existing tank, setting aisde or lowering if required ,reconnecting and re fixing in position complete all as specified and as directed.

M & L for Cleaning and removing all scale and dirt, etc., from tanks of capacity exceeding 2000 Litres but not exceeding 5000 litres including disconnecting existing tank, setting aisde or lowering if required ,reconnecting and re fixing in position complete all as specified and as directed.

M & L for Cleaning and removing all scale and dirt, etc., from tanks of capacity exceeding 5000 Litres but not exceeding 10000 litres including disconnecting existing tank, setting aisde or lowering if required ,reconnecting and re fixing in position complete all as specified and as directed.

S&F in repairs kitchen Sink with drainage board made of stainless steel 1 mm thick with plugs, washers and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm and bowl size 405 mm x 355 mm x 178 mm complete all as specified and as directed. MAKE : M/S BLUE STAR MODEL NO. BSSBSD-52 OR Equivalent in M/S JAYNA, NIRALI

S & F Waste coupling suitable for wash baisn, sink etc., of PTMT (Half or full threaded) of minimum weight 60 grams, and fixed to discharge pipe of 40 mm dia., bore complete all as specified and as directed.

M & L for PVC (SWR) plain Floor trap of 75 mm dia., outlet with grating including jointing with solvent cement complete all as specified and as directed.

S & F 750 mm long, 32 mm dia., PVC flexible Waste pipe for sinks / wash hand basins / urinals complete all as specified and as directed.

S&F 15mm Hand shower Health Faucet with 8mm dia 1.2 metre long Flexible tube and wall hook, Non return valve of approved make complete all as specified and as directed. Make : Jaquar ALD CHR -583 or its equivalent in Plumber / Parko

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

S & F Stainless steel hand rail and posts in balcony / staircase hand rails etc., of Grade 304 SG including necessary fixing arrangements, welding etc., as required at site complete all as specified and as directed.

TECHNO SOFT SOLUTIONS

HARSHITHA INFRA

RAGHU RAMA PANDA

S RAMAKRISHNA RAJU

M/s Sudersana Traders

RAVITEJA ENGINEERING WORKS

B ESWARA RAO