MAINTENANCE AND REPAIRING WORK OF VARIOUS MUNICIPAL GARDENS IN SUB ZONE-1 IN SOUTH WEST (ATHWA) ZONE.

NAME OF WORK :- MAINTENANCE AND REPAIRING WORK OF VARIOUS MUNICIPAL GARDENS IN SUB ZONE-

1 IN SOUTH WEST (ATHWA) ZONE.

Tender (On Line) Notice No. Dy.Commissioner / S. W.(Athwa) Zone/ No.03/ 2026-2027

ITEM SOR 23- AMOUNT IN

1 Excavation for foundation includ.sorting out & stacking of useful materials &

disposing of the excavated stuff upto 50 mt. Lead & all lift, watering

etc. Comp. (A) Loose or Soft soil

Executed With Mechanised Efforts / Machinaries

(1) Up to 1.5 Mt. depth 50.00 117.26 C.M.

2 Excavation for foundation includ.sorting out & stacking of useful materials &

disposing of the excavated stuff upto 50 mt. Lead & all lift, watering

etc. Comp. (A) Loose or Soft soil

Executed With Manual Labours

(1) Up to 1.5 Mt. depth 50.00 203.83 C.M.

3 Providing & Laying C.C1:5:10 (1cement :5coarse sand :10 graded stone agg. 3.00 2517.44 C.M.

40 m.m Nominal size )& curing comp. excl. cost of from work in :Foundation

4 Providing & laying cement concrete 1:4:8 (1 cement:4 sand:8 graded 3.00 2680.21 C.M.

stone agg. 40 mm nominal size) & curing comp. excl.cost of form work in

(A) Foundation and Plinth

5 Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6 Crushed stone agg 3.00 3005.76 C.M.

20m.m Nominal size)&curing comp. excl. cost of form work in :(a) foundation

6 Providing & laying cement concrete 1:1.5:3 (1 cement:1.5 sand:3 graded 3.00 4146.15 C.M.

stone agg. 20 mm nominal size)& curing comp. Includ.cost of form work but

exclu. Cost of reinforcement for reinforced concrete work in : (A) Foundation,

footing, Base of columns and Mass concrete.

7 Providing & laying ordinary cement con.1:1.5:3 (1cement:1.5sand: 3 graded

stone agg. 20 mm nominal size) finishing smooth curing etc. comp. Incld. Cost

of form work but excl. Cost of reinforcement for R.C.C. Work in : Up to

G.L./P.L. (A) COLUMNS:

(1)Having c/s area up to 0.08 s.mt 3.00 12632.60 C.M.

(2) Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt 3.00 11166.97 C.M.

(3) Having cross sectional area more than 0.12 sq. mt. 0.00 9201.68 C.M.

(1)Having c/s area up to 0.08s.mt 3.00 9102.61 C.M.

(2) Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt 3.00 8174.41 C.M.

(3) Having cross sectional area more than 0.12 sq. mt. 0.00 7086.88 C.M.

8 Providing & fixing IS Mark TMT Bar FE 500D reinforcement for R.C.C. 200.00 76.21 Kg.

work incl. bending, binding & placing in position etc. comp. Upto G.L./P.L.

9 Brick work using common burnt clay building bricks having crushing strength 50.00 4237.00 C.M.

not less than 35 kg./Sq.Cm. in foundation and plinth in Cement

Mortar 1:6 (1- Cement : 6 -fine sand)(C) Fly Ash Bricks

10 Filling available excavated earth (excluding rock) in trenches. plinth, sides of 10.00 130.39 C.M.

foundations etc. in layers not exceeding 20 cm. in depth consolidating each

disposited layer by ramming and watering.

11 Filling in foundation and plinth with murrum or selected soil in layers of 20cm. 10.00 289.06 C.M.

thickness including watering, ramming and consolidating etc. complete.

12 20mm thick sand faced cement plaster on walls upto height 10 metres above 10.00 330.88 S.M.

ground level consisting of 12mm thick backing coat of C.M. 1:3

(1-cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-

sand) etc. complete.

ITEM SOR 23- AMOUNT IN

13 Providing & laying ordinary cement con.1:1.5:3(1cement:1.5sand:3 graded

graded stone agg. 20 mm nominal size) finishing smooth curing etc.

comp. Incl.. Cost of form work but excl. Cost of reinforcement for R.C.C.

(1)Having c/s area up to 0.085 s.mt- Ground Floor 2.00 12632.60 C.M.

First Floor 0.00 12672.24 C.M.

Second Floor 0.00 12711.88 C.M.

Terrace (third) Floor 0.00 12751.53 C.M.

(2) c/s area more than 0.085 sq. mt. & upto 0.12 sq.mt - G.F 2.00 11166.97 C.M.

First Floor 0.00 11206.61 C.M.

Second Floor 0.00 11246.25 C.M.

Terrace (third) Floor 0.00 11285.89 C.M.

(3) Having cross sectional area more than 0.12 sq. mt. -- G.F 0.00 9201.68 C.M.

First Floor 0.00 9241.32 C.M.

Second Floor 0.00 9280.96 C.M.

Terrace (third) Floor 0.00 9320.61 C.M.

(1)Having c/s area up to 0.08s.mt- Ground Floor 2.00 9102.61 C.M.

First Floor 0.00 9142.25 C.M.

Second Floor 0.00 9181.89 C.M.

Terrace (third) Floor 0.00 9221.53 C.M.

(2) Having c/s area more than 0.08 s.m. & upto 0.12 s.m - G.F 2.00 8174.41 C.M.

First Floor 0.00 8214.05 C.M.

Second Floor 0.00 8253.69 C.M.

Terrace (third) Floor 0.00 8293.33 C.M.

(3) Having cross sectional area more than 0.12 sq. mt. -- G.F 0.00 7086.88 C.M.

First Floor 0.00 7126.52 C.M.

Second Floor 0.00 7166.16 C.M.

Terrace (third) Floor 0.00 7205.81 C.M.

(2) Slabs having more than 8cm. and upto 10 cm. Th'.- G.F 2.00 7984.42 C.M.

First Floor 0.00 8024.06 C.M.

Second Floor 0.00 8063.70 C.M.

Terrace (third) Floor 0.00 8103.34 C.M.

(3) Slabs having more than 10 cm. & upto 13 cm. Th'.- G.F. 0.00 7396.96 C.M.

First Floor 0.00 7436.60 C.M.

Second Floor 0.00 7476.24 C.M.

Terrace (third) Floor 0.00 7515.89 C.M.

(4) Slabs having more than 13 cm. Thickness -- G.F 0.00 6813.01 C.M.

First Floor 0.00 6852.65 C.M.

Second Floor 0.00 6892.29 C.M.

Terrace (third) Floor 0.00 6931.94 C.M.

(D) LINTELS: -- G.F 2.00 9531.24 C.M.

First Floor 0.00 9570.88 C.M.

Second Floor 0.00 9610.53 C.M.

Terrace (third) Floor 0.00 9650.17 C.M.

(E) CHAJJAS: -- G.F 2.00 5512.83 C.M.

First Floor 0.00 5552.47 C.M.

Second Floor 0.00 5592.11 C.M.

Terrace (third) Floor 0.00 5631.76 C.M.

14 Providing & laying ordinary cement con.1:1.5:3(1cement:1.5sand:3 graded

graded stone agg. 20 mm nominal size) finishing smooth curing etc.

comp. Incl.. Cost of form work but excl. Cost of reinforcement for R.C.C.

(A) Stair cases including landings etc.

Ground Floor 2.00 7380.20 C.M.

First Floor 0.00 7419.85 C.M.

Second Floor 0.00 7459.49 C.M.

Terrace (third) Floor 0.00 7499.13 C.M.

ITEM SOR 23- AMOUNT IN

(B) Vertical and horizontal fins

Ground Floor 2.00 10831.75 C.M.

First Floor 0.00 10871.40 C.M.

Second Floor 0.00 10911.04 C.M.

Terrace (third) Floor 0.00 10950.68 C.M.

15 Providing & fixing IS Mark TMT Bar FE 500 / FE 500d reinforcement for 100.00 76.21 Kg.

R.C.C. work incl. bending, binding & placing in position etc.comp.---

First Floor 0.00 77.21 Kg.

Second Floor 0.00 78.21 Kg.

Terrace (third) Floor 0.00 79.21 Kg.

16 Brick work using common burnt clay building bricks having crushing strength 20.00 4511.97 C.M.

not less than 35 kg./Sq.Cm. in Cement Mortar 1:6 (1- Cement : 6 -fine

sand)(C) Fly Ash Bricks

First Floor 20.00 4786.95 C.M.

Second Floor 0.00 5061.92 C.M.

Terrace (third) Floor 0.00 5379.24 C.M.

17 Half brick masonry in common brunt clay building bricks having

crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement

: 4 - coarse sand ) in foundation and plinth (C)Fly Ash Bricks:

Ground Floor 20.00 678.86 S.M.

First Floor 0.00 685.11 S.M.

Second Floor 0.00 691.37 S.M.

Terrace (third) Floor 0.00 697.62 S.M.

18 Uncoursed rubble masonary with hard stone of approved quality in 0.00 2500.01 C.M.

foundations and plinth in cement mortar 1:6 (1 Cement : 6 sand) including

leveling up etc. complete.

19 Providing Rubble Pitching with hard stone of approved quality in 0.00 2550.00 C.M.

cement mortar 1:6 (1 Cement : 6 Coarse sand) including leveling up

,Curing etc. complete excluding pointing

20 Providing and filling rubbles including hand packing and filling interstices 0.00 1064.80 C.M.

with quarry spalls behind abutments and between returns as directed.

21 Providing & Applying 10mm.th.cement plaster in single coat on brick/ 20.00 189.79 S.M.

concrete walls similar surfaces for plastering & finished even & smooth

with a floating coat of cement slurry mixed with admixture of lime or

neeru in required proportion etc. comp. in C.M 1:3 (1 cement : 3sand)

(A) For wall and similar surfaces -- Ground Floor

First Floor 10.00 217.93 S.M.

Second Floor 0.00 246.07 S.M.

Terrace (third) Floor 0.00 274.20 S.M.

(B) For ceilings &soffits of stairs

Ground Floor 10.00 214.60 S.M.

First Floor 10.00 242.74 S.M.

Second Floor 0.00 270.88 S.M.

Terrace (third) Floor 0.00 299.02 S.M.

22 Providing & Applying 15mm.th.cement plaster in single coat on brick/ 10.00 237.51 S.M.

concrete walls similar surfaces for plastering & finished even & smooth with a

floating coat of cement slurry mixed with admixture of lime or neeru in

required proportion etc. comp. in C.M 1:3 (1 cement : 3sand) (A) For wall

and similar surfaces -- Ground Floor

23 20mm thick sand faced cement plaster on walls for height more than 15.00 330.88 S.M.

10 metres above ground level consisting of 12mm thick backing coat of C.M.

1:3 (1-cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-

sand) etc. complete.

ITEM SOR 23- AMOUNT IN

24 Providing 20 mm thick double coat mala cement plaster on brick / 15.00 272.48 S.M.

concrete work for plastering comprising of base coat 12 mm thick cement

plaster in cement mortar (1 Cement : 4 coarse sand) in rough finishing

and 8 mm thick top coat of cement mortar 1:2 (1 Cement : 2 Coarse

sand) finished with trovel including scaffolding curing etc. complete.

25 Providing & Applying 20mm. Th. Heavy Roller plaster on walls or similar 15.00 324.00 S.M.

surfaces at all floor levels consisting of 12 mm av. Th. Backing coat of

C.M. 1:3 (1 cement:3 sand) & 8 mm. th. Finishing coat of C.M. 1:1 (1

cement: 1 sand) apply thick cement slurry and apply roller horizontal as well

as vartical (two times) up to good quality and size of grain in elevation

as per directed by engineer incharge.

26 Providing throating or plaster drip and moulding it to R.C.C. chajja etc. 10.00 41.66 R.M.

comp.. For all floor

27 Providing 20 mm deep finished groove in plaster in line and level etc. Comp. 10.00 50.00 R.M.

For all Floor (M.R.)

28 Providing and laying precast terrazo tile 20mm thick white,black, white 0.00 629.91 S.M.

and black (or of the colour specified in specification of tender item) marble

chips of sizes upto 6mm laid in floors, treads of steps and landings on a bed of

25mm average thickness of Lime mortar 1:1.5(1-Lime putty : 1.5 coarse

sand) or C.M. 1:6 (1:cement :6 - coarse sand) jointed with neat cement slurry

mixed with pigment to match the shade of tiles including rubbing and

polishing complete with precast tiles of.(A) Light shades using white

29 Providing and laying polished Kota stone slab flooring over 20mm (Average) 10.00 989.45 S.M.

thick base of cement mortar 1:6 (1-cement : 6-coarse sand) or

L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid over and jointed with

grey cement slurry mixed with pigment to match the shade of slab including

rubbing and polishing etc. complete. (A) 25mm thick

30 Providing and laying polished kota stone slab 25mm thick in risers of 10.00 1076.94 S.M.

steps,skirting Dedo and pillars laid on 10mm thick cement mortar 1:3 (1-

Cement : 3 coarse sand) and jointed with gray cement slury mixed with

pigment to match the shade of slab including rubbing and polishing etc.

31 Providing & Laying white glazed tiles 6mm. th. of Orient, 10.00 857.42 S.M.

Kajaria, Jhonson,Nitco,Somani,Bell make at all floor levels, in flooring,

treads of steps & landings laid on a bed of 12 mm. Av. Th.C.M.1:3(1cement :3

sand) finished with flush pointing in white cement etc.com. For all floors

32 Providing & Laying white glazed tiles 6mm. th. Of Orient, Kajaria, 10.00 887.64 S.M.

Jhonson,Nitco,Somani,Bell make at all floor levels in skirting risers of

steps & dado on 10 mm. th. C.M.1:3(1cement :3 sand) including

necessary cement paste for fixing and joined with white cement slurry etc.

complete. For all floors

33 Providing and laying Ceramic tiles 6mm thick in flooring treads of steps and 10.00 914.69 S.M.

landing laid on bed of 12 mm thick cement mortar 1:3 (1 Cement :

Coarse Sand) finished with flush pointing in white cement.

34 Providing & Laying ceramic tiles 6mm thick in skirting, risers of steps 10.00 987.86 S.M.

and dedo on 10mm thick cement mortar 1:3 (1 Cement : 3 sand) and

jointed with white slurry.

35 Providing & laying marble stone slab flooring over 20 mm.av. base of 10.00 2139.56 S.M.

C.M.1:6 ( 1 cement :6 coarse sand ) & jointed with grey cement slurry incl.

rubbing & polishing comp.(A) Marble slab 25 mm. Thick.

36 Providing & laying granite slab 18mm thick in flooring, treads of steps and 10.00 2410.00 S.M.

landing laid on bed of 20mm thick cement mortar 1:6 (1 Cement : 6 coarse

sand) or lime mortar 1:1.5 laid and finished with flush pointing in white or

colour cement including rubbing and polishing complete. (Basic

Rate:- Rs.1347.46/S.M.)

ITEM SOR 23- AMOUNT IN

37 Providing & laying granite slab 18mm thick in skirting, risers of steps, dedo 10.00 2449.00 S.M.

and pillars laid on 10mm thick cement mortar 1:4 (1 Cement : 4 Coarse

sand) and finished with flush pointing in white or colour cement including

rubbing & polishing comp.. (Basic Rate:- Rs.1347.46/S.M.)

38 Providing & laying granite slab 18mm thick in Window-Door seal 10.00 2026.00 S.M.

Frame Etc laid on 10mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand)

with nessary adhesive material and finished with flush pointing in white or

colour cement, including rubbing & polishing comp.. (Basic Rate:-

39 Labour Charges For Edge Finished For Granite 10.00 43.43 R.M.

40 Providing & laying Vitrified tiles of 8mm thick of Orient, Kajaria, 10.00 1397.83 S.M.

Jhonson, Nitco, Somani, Bell, Asian or Euro make in flooring,treads of steps

& Landing laid on bed of 20 mm (Average) base of cement mortar 1:6 (1

Cement : 6 Coarse sand) on new surface or fixing on existing flooring

by adhesive material including dismentaling of existing flooring and

jointed with colour cement slurry including finished with flush pointing &

cleaning the surface etc. comp.Size 24" x 24"

For Antiskid tiles

41 Providing and laying Vitrified tiles 8 to 10 mm thick, 24" x 24" in flooring 50.00 1040.35 Sqm.

treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1

cement : 3 coarse sand) finishing with flush pointing in white cement.

42 Providing and laying Vitrified tiles 8 to 10 mm thick, 24" x 24" in skrting 50.00 1081.71 Sqm.

risers of steps and dedo on 10mm thick cement plaster 1:3 (1 cement : 3 coarse

sand) and jointed with white cement slurry.

43 Providing and laying Vitrified tiles 8 to 10 mm thick, 36" x 36" in flooring 0.00 1484.61 Sqm.

treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1

cement : 3 coarse sand) finishing with flush pointing in white cement.

44 Providing and laying Vitrified tiles 8 to 10 mm thick, 36" x 36" in skrting 0.00 1538.85 Sqm.

risers of steps and dedo on 10mm thick cement plaster 1:3 (1 cement : 3 coarse

sand) and jointed with white cement slurry.

45 Providing and laying chequered precast concrete tiles 22mm thick with 100.00 528.01 S.M.

aggregate of sizes upto 6mm in floors treads of steps and landing on

20mm thick bed of C.M. 1:6 (1 cement : 6 sand) or L.M. 1:1.5 (1 Lime

putty : 1.5 sand) jointed with neat cement slurry with pigments to match the

shade of the tiles.

46 Providing and laying rough chiseled dressed stone flooring over 20mm thick 0.00 549.47 S.M.

base of cement mortar 1:5 (1 cement : 5 coarse sand) or L.M. 1:1.5 including

pointing with cement mortar 1:2 (1 cement : 2 stone dust) etc.

47 Providing and laying cement concrete flooring 1:2:4 (1 cement :

course sand : 4 graded stone aggregate 20mm nominal size) laid in one layer

finished with a floating coat of neat cement

(A) 40mm thick 10.00 303.84 S.M.

(B) 50mm thick 10.00 356.33 S.M.

48 Providing & fixing 35mm.th. Flush Door Solid Double Core type Both Face 1.00 3720.00 S.M.

water proof Ply Vennered & 1.5 mm th.laminate shall be pasted on both

side with adhesives as specified by the manufacturers. The laminate shall

be as per approved shade & texture, of make incl. Sal wood frames of

finished size 12cm x 7cm.incl. S.S. Hinges with nessary screws &

Anodized aluminum fixtures & fastenings For all Floor

Same as Above But Without Frame 1.00 2520.00 S.M.

49 Providing & fixing 35mm.th. Indian teak wood shutters for doors, 1.00 5533.68 S.M.

windows & clearstory windows incl. Indian teak wood frames of finished

size 12cm x 7cm.incl. anodized aluminum fixtures & fastenings incl.

Primer coat of approved quality & two coats of oil painting etc. For all

Floor (A) Fully Panelled

ITEM SOR 23- AMOUNT IN

(B) Partly Panelled and Partely Galzed 1.00 5185.03 S.M.

(C) Fully Galzed 1.00 4551.69 S.M.

50 Providing and fixing 35mm thick shutters for Doors, windows and 2.00 3941.37 S.M.

clearstory windows including anodised alluminium butt hinges with

necessary screws. (A) Indian teak wood. (i) Fully Panelled.

51 Providing and fixing FRP FRAME size 125 x 65 mm and 35 mm thick FRP 50.00 2019.98 S.M.

shutter with wood grain raised panneled design finish shutter having extra

reinforcement on sides & edges in Gel coat finish. The core of the shutter &

frmae is to be filed up with injected polyurethene foam done in situ along with

embedded wooden pieces for stiffening & also taking hinges & fixtures. The

whole FRP frame & shutter is to be water proof weather proof,termite proof

&resistance to mild acid/alkali. Rates are to be inclusive of S.S.hinges with

fastener sleeve & alluminium fixtures & fastentings.

52 Providing & fixing M.S.Grills of required pattern to wooden frames of 100.00 104.20 Kg.

windows etc. At all floor levels with M.S. flats at required spacing & frame

around square or round bars with round headed bolts & round headed

bolts and nuts or by screws incl. Priming coat of Red lead paint etc.

comp. (A) Plain grill For all Floors

53 Providing & fixing in position collapsible steel shutters with vertical 10.00 5865.10 S.M.

channels 20 x10 x 2 mm. Braced with flat iron diagonals 20 x5mm size with

top & bottom rails of T-iron 40x40x6mm. with 38mm dia. steel pulleys comp.

with bolts, locking arrangements, stoppers, handles incl. applying a priming

coat of Redlead paint etc. comp.

54 Providing and fixing M.S. Fan clamps type 1 to 16 mm dia M.S. bar bent to 10.00 129.02 Each

shpe with hooked ends to RCC slabs curing, layig including painting the

exposed portion of loops, all as per standard design complete.

55 Providing & laying ordinary C.C.1:1.5:3 mix for R.C.C. work incl. boxing,

centering, vibrating, curing & mixed with approved water proofing cement

compound or "CEMWET"or"PIDICRETE LW"integral water proofing

admixture as water proofing agent to be mixed with 50 kg. cement bag

shall be as recommended by the manufacture of the water proofing

material, concrete work for top, bottom slab & side pardi for Under

ground Tank & Item incl. Necessary excavation & refilling the available

earth, 15 cm th' C.C 1:4:8 for bedding concrete, Half B.M. in C.M. 1:4

outside wall, inside R.C.C. pardi as per design, 10mm.th. water proofing

cement plaster in C.M. 1:3 with smooth finishing,watering etc.Comp.to all

inner face & bottom of tank curing etc. comp. incl. Locking arrangement,

outlet, inlet, overflow & wash out pipe arrangement as necessary & C.I. Cover

0.60 x .045 weight not less then 35kg. etc. com. as per structural drawing

excluding Steel & as directed by Engineer-in-charge

Underground tank 10.00 5.46 Lit.

56 Providing and filling in depressions of Bath and W.C. At all floor levels, after 10.00 500.00 C.M.

completing plumbing work of pans, pipes,traps etc.with cinder or fly ash as

directed by Engineer in charge etc. comp..

57 NOTE :- (1) The whole work is to be executed through specialized agency

with a guarantee of 10 (Ten) years given on a prescribed proforma duly

stamped (2) The rate shall include for work at all floors & conducting

water proof test as directed. (M.R.)

ITEM SOR 23- AMOUNT IN

58 (A) Providing and laying water proofing treatment to vertical and horizontal 10.00 296.00 S.M.

surfaces of depressed portions of W.C.,kitchen and the like consisting of :

(a) I course of applying cement slurry @ 4.4 kg/sqm mixed with water

proofing compound conforming to IS : 2645 in recommended proportions.

(b) II course of a layer of plaster in C.M. 1:3 with water proofing compound

confirming to IS:2645 about 25 mm. th' in the floor of the depression & about

18mm th' On the side walls of the depression up to the floor level, water

proofing plaster about 18 mm. th' be continued on the walls above the floor

level for a height of 600 mm. with surface suitable to receive further treatment

(c) Finishing top with stone aggregate 10mm to 12mm nominal size spreading

@0.008 C.M./S.M., thoroughly embedad in plaster layer. as per specifications

& instructions of Engineer in charge (Cement consumption 0.316 Bags / S.M.)

(B) Providing and laying integral cement based water proofing treatment 10.00 511.00 S.M.

including preparation of surface as required for treatment of roofs, balconies,

terraces etc. consisting of following operations.

(a) Applying and grouting a slurry coat of neat cement using 2.75 kg/sqm of

cement admixed with proprietary water proofing compound comforming to

IS:2645 over the R.C.C. slab including cleaning the surface before tratment.

(b) Laying cement concrete using broken bricks/brick bats 25 mm to 100 mm

size with 50% of cement mortar 1:5 (1 Cement : 5 Coarse sand) admixed with

proprietary water proofing compound conforming to IS:2645

,brick bats is finally covered by jointless cement plaster 20mm th. in C.M. 1:4

added with special water proofing compound confirming to IS:2645 & top

smooth finished with trowel with false chequered marking of 300 mm.size.The

treatment is carried along the vertical surface of the parapet & other adjoining

wall up to height of about 300 mm in a shape of quarter round vata Incl. curing

etc. Comp. With average thickness of 120 mm and minimum thickness at

khurra as 65 mm.

(c) The whole terrace so finished shall be flooded with water for a minimum

period of two weeks for curing and for final test. All above operations to be

down in order and as directed and specified by the engineer-in-charge. With

average thickness of 120 mm and minimum thickness at khurra as 65 mm.

(Cement consumption 0.511 Bags / S.M.)

59 Proiding & laying water proofing treatment to vertical and horizontal 10.00 505.00 S.M.

surfaces like consisting of (a) I course of applying cement slurry 4.4 kg per

sq.mt. mixed with water proofing compound confirming to IS:2645 in

rcommended proportions. (b) II corse of 20mm cement plaster 1:3 mixed with

water proofing compound in recommended proportion (c) III course of

applying blown or / resideal bitumen applied hot at 1.7 kg per sqm of area. (d)

IV course of 400mm micron th. PVC sheet. (Overlaps at joints of PVC sheet

should be 200mm wide and pasted to each other with bitumen

about 1.7 kg./ sqm.)

60 Providing & fixing G.I. Rain water spout of 50 mm.dia & 30 cm length 10.00 101.91 No.

61 Providing & fixing at all floor levels,both face polished machine cut 10.00 900.00 S.M.

edge green kota stone slab (30mm) for urinal partition joined with

grey cement slurry (1:1) incl. Rubbing & polishing etc. complete. (M.R.)

62 Providing & fixing at all floor levels,both face polished machine cut 10.00 1050.00 S.M.

edge Marble slab for urinal partition joined with grey/White cement

slurry (1:1) incl. Rubbing & polishing etc. complete. (M.R.) (Basic

Cost- Rs. 450/S.M.)

ITEM SOR 23- AMOUNT IN

63 Prov.& Fixing water closet squatting pan (Indian type W.C.pan) at all floor 5.00 1401.60 NO.

levels, size 580mm incl. 100 mm size "P'or "S" trap for water closet squatting

pan joining the trap with the pan & soil pipe in C.M. 1:1 (1cement :1

fine sand) etc. Comp.(A) Vitreous china long pattern of approved colour

64 Providing and fixing Wash Down Water closet European type W.C. pan 5.00 1303.71 Each

with integral P or S trap including jointing the trap with soil pipe in cement

mortar 1:1 (1 cement : 1 find sand) (seat and cover to be measured and paid for

separately) (A) Viterous china pattern - I (i) in approved colour

65 Providing and fixing plastic seat and cover for wash down water closet with 5.00 291.33 Each

C.P. brass hinges and rubber buffers (B) Plastic seat and cover.

66 Providing & fixing wash basin with single hole for pillar tap at all 5.00 2059.93 No.

floor levels, with C.I. or M.S. Brackets painted white incl. cutting holes

& making good the same incl. fittings such as pillar tap, capstan head

screw down high pressure with screws, shanks & back nuts, C.P. Brass waste

trap, screw down stop tap 15 mm. dia. etc. complete. (A) Vitreous

china flat back wash basin 550 mm.x 400 mm. size in approved colour For all

67 Providing & fixing Urinal or approved quality including conecting the Urinal 5.00 1036.27 Each

with waste pipe, tap etc. complete. (A) White earthenware flat back or corner

type size 430 mm x 260mm x 350mm

68 Providing & fixing 600 mm.x 450 mm. mirror of superior glass at all floor 5.00 833.73 NO.

levels, mounted on 6 mm. th. A.C. sheet or plywood sheet & fixed to

wooden plugs with C.P.brass screws and washers etc. For all Floor

69 Providing & fixing C.P. brass pillar cock with copper connection,

C.P. brass screws complete

Make- Cera F2013101, Parry ware G3102A1, HindWare Cat. No.: F650003, 1.00 1423.00 NO.

Jaquar FLR-5011N

70 Providing & Fixing 15 mm Dia bib tap with wall Flange at all floor

levels, polished bright etc. comp.

Make- Cera F2013151 BIB COCK, Parry wareG3104A1, HindWare 1.00 1323.00 NO.

F280002 BIB COCK, Jaquar FLR-5047 N BIB COCK

71 Providing & Fixing 15 mm Dia 2 way bib tap with wall Flange at

all floor levels, polished bright etc. comp.

Make- Cera F2013163, Parry ware G4834A1, HindWare Cat. No.: 1.00 1755.00 NO.

F530004, Jaquar FLR-5041N

72 Providing flush cock consisting lever, cartridge sleeve & flange

& concealed part

Make- Cera EXPOSED PART F2013751 &Concealed part F4060101 , Parry 1.00 2110.00 NO.

ware T9824A1&T9823A1, Jaquar FLR 5083 KN , CONCEALED BODY

ALD-081,HindWare F280052 & CONCEALED STOP COCK

73 Providing & fixing 15mm C.P. brass angle valve (Stop Cock)

with C.P. copper connecting pipe 450 mm long and nuts, washer

and brass flange complete, including cutting and making good the wall where

Make- Cera F1020362, Parry ware T0712A1, HindWare Cat. No.: 1.00 1432.00 NO.

F440020 F850094, jaquar CON 053 KN

74 Providing and fixing Wash Down Water closet European type

W.C. pan with integral P or S trap with normal closing seat cover L bend

ncluding jointing the trap with soil pipe in cement mortar 1:1 (1 cement : 1 find

sand) (A) Viterous china pattern - I

Make- Cera CONVENTIONAL B1510121 , Parry ware C0297*/ C0278, 1.00 3282.00 NO.

HindWare sleek 20011, Jaquar- CNS-WHT-751P180SPPZ

75 Providing & fixing Wash Hung basin with single hole for pillar tap, Size-

x 400 mm at all floor levels, with C.I. or M.S. Brackets painted white incl.

cutting holes & making good the same etc. complete. For all Floor

ITEM SOR 23- AMOUNT IN

Make- Cera Cat. No. S2040121, Parry wareC0434* (CTH), Jaquar 1.00 2656.00 NO.

SLS- WHT -6801 ,HindWare10004

76 Providing & fixing white vitreous china urinal of size 450 x325mm

as per IS-2556 (Part-2 ) with C.I. hangers and 15mm dia. C.P. spreader,32mm

dia CP bottle trap and pipe to wall with C.P. flange complete including cutting

and making good the walls and floors wherever required.

Make- CeraCat. No. S4020103, Parry ware C0501*, Jaquar URS-WHT 1.00 2476.00 NO.

13261H ,HindWare BACK SMALL

77 Providing & fixing of overhead shower 80 mm (3”) dia with 3 flow with

Overhead Shower arm 200 mm with wall flange complete

Make- Cera F7010602AB, Parry ware, Jaquar OHS-1989 ,HindWare 1.00 1569.00 NO.

Cat. No.: F160144

78 Providing and fixing Towel Ring fabricated from seamless stainless steel tube

2mm thick in bath room with polished wall flange at end of bars with heavy

duty anchor fasteners & accessories.

Make- Cera F5014115CH, Parry ware F5014115CH, Jaqua ACN- 1121N 1.00 890.00 NO.

,HindWare F880007

79 Providing & fixing S.S.towel rail of 600 mm long approved make including,

providing & fixing C.P. brass screws, making holes in walls & making good.

Make- Cera F5015103CH, Parry ware F880005T, Jaquar 1111BSM 1.00 1043.00 NO.

,HindWare F880005T

80 Providing & Fixing stainless steel recessed type Soap dish of approved make.

Including providing & fixing screws, washers,

cutting & making good the walls.

Make- Cera F5007106, Parry ware T6902A1, Jaquar ACN-1131N 1.00 793.00 NO.

,HindWare F880011

81 Prov.& Fixing water closet squatting pan (Orissa type W.C.pan)

at all floor levels, size 500mm x 400 mm incl. 100 mm size "P'or "S" trap for

water closet squatting pan joining the trap with the pan & soil pipe in C.M. 1:1

(1cement :1 fine sand) etc. Comp.(A) Vitreous china long pattern

Make- Cera S3010109, Parry ware C0117CS/C0117* , Jaquar 1.00 3275.00 NO.

82 Prov.& Fixing Health Faucet ABS Body with wall Hook and 1 Meter chrome

plated PVC Hose Pipe.

Make- Cera F8030106AB, Parry ware T9874A1, Jaquar ALD-587 1.00 971.00 NO.

,HindWare F160109

83 Providing & fixing white vitreous china Ladies urinal of size 470 x360X100

mm and 15mm dia. C.P. spreader, and pipe to wall complete including cutting

and making good the walls and floors

wherever required.

Make- Cera 4040101, Parry ware C0503, ,HindWare 60003 1.00 2233.00 NO.

84 Providing & fixing Paper holder with flap guard of 150 mm long

approved make including, fixing C.P. brass screws, making holes in walls &

Make- Cera f5002110, Parry ware T6005A1, Jaquar AHS-1551 1.00 1664.00 NO.

,HindWare F890003

85 Providing & Fixing pressmatic bib tap with wall Flange at all floor

levels, polished bright etc. comp.

Make- Cera F9020151, Parry ware G2056A1 , Jaquar PRS-043 1.00 1741.69 NO.

,HindWare F310016

86 Providing Metropole Flush Valve Dual Flow 40mm Size (Concealed Body)

Make- Cera F8010202 , Parry ware T3302A1 , Jaquar FLV-1089NSQ 1.00 3465.00 NO.

,HindWare F860075

87 Providing Sink Cock with Regular Swinging Spout

Make- Cera F2008251 , Parry ware G3321A1 , Jaquar FLR-5347N 5.00 1722.00 NO.

,HindWare F650013

ITEM SOR 23- AMOUNT IN

88 Providing & Fixing C.P. Brass screw down bib tap at all floor levels, 50.00 186.83 NO.

polished bright etc. comp.-(A) 15mm dia. For all Floors

89 Providing & Fixing gun metal check or non return full way wheel valve 50.00 186.83 NO.

at all floors levels, etc. complete. (A) 15 mm. dia.

90 Providing & Fixing chromium plated brass half turn flush cock at all floor 30.00 263.77 NO.

levels, of approved quality incl. fixing in pipe line etc. Comp.-- 25 mm dia.

91 Prov. & Fixing S.W. Gully trap with C.I.grating brick masonary (C.M 5.00 1292.19 NO.

1:5)chamber & water tight C.I. cover with frame of 300mmx300mm size

(inside) with weight includ. plastering smooth inside & outside 15mm. th' in

C.M.1:3 etc. comp. (i) Square mouth traps---(A) 100mm x 100mm Size P type

(B) 150mm x 100mm Size- P Type 5.00 1246.92 No.

92 Prov. & Fixing S.W. Gully trap with C.I.grating brick masonary (C.M 5.00 1098.48 No.

1:5)chamber & water tight Pre cast R.C.C. cover of 300mmx300mm size

(inside) includ. plastering smooth inside & outside 15mm. th' in C.M.1:3 etc.

comp. (i) Square mouth traps---(A) 300mm x 300mm Size -P type

(B) 150mm x 100mm Size- P Type 5.00 1053.20 No.

93 Prov. & Fix. 10 cm.x15 cm.(4" x 6") S.W. trap with Inside dimension 5.00 3155.63 No.

,455 x 610 mm & 450 mm deep sewer trap chamber with 23 cm th' B.B.

masonary walls in C.M 1:5 with cement plaster 15 mm th' in C.M. 1:3

inside & outside to exposed faces, R.C.C. top slab with 1:2:4 mix (1

cement: 2 Sand : 4 Grade stone aggregate 20mm size) ,Foundation

concrete 1:5:10 & fixing C.I. cover with frame to be not less than 38 kg. On

top etc. comp. for single pipe.

.(A).Same as above but Precast RCC heavy duty Cover instead of C.I. 5.00 2904.47 No.

Extra for every additional depth of 0.1 mt beyoung 0.45 mt 5.00 222.71 Each

94 Providing & construction simple chamber of 23 cm. th' B.B. Masonary in C.M 5.00 2932.93 No.

1:5 with cement plaster 15 mm th' in C.M. 1:3 inside & outside to exposed

faces, R.C.C. top slab with 1:2:4 mix ( 1 cement: 2 Sand : 4 Grade

stone aggregate 20mm size) ,Foundation concrete 1:5:10 & fixing C.I. cover

with frame to be not less than 38 kg. On top etc. comp. Inside dimension,455

x 610 mm &450 mm deep for single pipe

(A) Same as above but Precast RCC heavy duty Cover instead of C.I. 10.00 2681.76 No.

Extra for every additional depth of 0.1 mt beyoung 0.45 mt 10.00 242.39 Each

95 Providing, Lowering & laying joining R.C.C. NP2 CLASS Pipe In C.M. 1:1

of following nominal internal diameters incl. Testing of pipes and joints

96 Providing & laying in trenches galvanised mild steel tubes(medium 0.00 282.18 R.M.

grade) TATA / ZENITH / ASIAN / JINDAL MAKE of the following nominal

bore & tube fittings etc. comp..- 25mm.dia.

97 Providing & Fixing to wall, ceiling floor at all floor levels, galvanised mild 0.00 249.02 R.M.

steel tubes(medium grade) TATA / ZENITH / ASIAN / JINDAL MAKE of

the following nominal bore, tube, fittings & clamps incl. making good the wall

ceiling and floor etc. complete.

(A) 15 mm. dia.

98 Providing & Fixing abonite ball cock of approved qualities directed etc. comp. 30.00 102.91 No.

(A) 25 mm. dia.

ITEM SOR 23- AMOUNT IN

99 Providing and fixing C.I. Machinehole cover 0.60 x 0.45 mt. Size having 20.00 958.17 No.

weight not less than 35 Kg. etc. complete.

100 Providing & Fixing U-PVC pipe (SWR) confirming to IS no.13592 (Type 100.00 412.00 R.M.

"B") of prince/Supreme/Jain/Astral/Tulsi/Finolex make for soil and waste

discharge system at all floor levels incl. All fixtures like bends, tees, shoe etc.

jointed with resin of approved brand & manufacture etc. comp.

(M.R.) (a) 75mm Dia

101 Providing & fixing U-PVC pipes Confirming to IS no. 13592 (Type "A") of 50.00 203.00 R.M.

Prince/Supreme/Jain/Astral/ Tulsi/Finolex make for rain water at all

floor levels incl. fixtures like bends, tees, shoe etc joined with resin of

approved brand & manufacture etc. comp. (M.R.) (A) 75 mm. Dia.

102 Providing, Laying and jointing on true line and level UPVC pipe (SCH-40)

line of Prince/Supreme/Jain/Astral/Tulsi/Finolex make including fittings

make or equivalent as approved by angineer-in-charge. Pipe shall be fixed on

the wall the help of clamp at every two meter C/C or shall be concealed as

directed including necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost

of all materials.

103 Providing & Fixing P.V.C. pipes (SCH-80) of Prince/ Supreme/ Jain/

Astral/ Tulsi/Finolex make for water supply line at all floor levels incl.

fixtures like bends, tees, shoe etc joined with resin of approved brand &

manufacture etc. comp. Pipe shall be fixed on the wall the help of clamp at

every two meter C/C or shall be concealed as directed including

necessary fittings etc. including testing of pipe and joints and fixing the

same with adhesive solvent, including cost of all materials.

104 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 110x110 mm 20.00 558.36 NO

diameter with jali of the following nominal diameter of self cleaning design

with C.I. scread down or hinged grating including the cost of cutting and

making good the walls.

105 Providing & Fixing in position PVC Cowl vent to pipes of 20.00 40.00 NO

Prince/Supreme/Jain/Astral/Tulsi/Finolex make etc.Comp. (A) 75 mm. dia.

106 Providing & fixing M.S. Holder Bat clamps at all floor levels of approved 10.00 30.00 No.

design to C.I. Or S.C.I pipes including the cost of cutting holes & making good

the wall etc. Complete - 100 mm. dia. (M.R.)

107 Providing & fixing G.I./Aluminum Patti clamps at all floor levels of 10.00 20.00 No.

approved design to C.I. Or S.C.I pipes including the cost of cutting holes &

making good the wall etc. Complete - 100 mm. dia. (M.R.)

108 Providing erecting and fixing double coated Sintex/Super/Reno PVC (ISI) 5000.00 3.95 Lit.

mark water tank of required capacity each with all necessary fittings &

connection etc. complete on terrace.

ITEM SOR 23- AMOUNT IN

109 Providing & Fixing Kathi around the vertical PVC drainage pipes for

concealing with cement plaster 20 mm avg thickness(CM 1:3 [1 cement :3

coarse sand]) finishing as per instruction given by Eng. incharge. for

(A) 75 mm PVC PIPE 10.00 173.00 R.M.

(B) 100 mm /110 mm PVC PIPE 10.00 180.00 R.M.

110 Boring holes 3.5 mt.deep in ordinary soil ( for cast in situ piles) &

disposal of the surplus excavated soil as directed within a lead of 50 M. For

following diameter of piles.

111 Providing & laying cement concrete 1:2:4 (1 cement:2 sand:4 graded 5.00 3637.34 C.M.

stone agg. 20 mm nominal size)& curing comp. Includ.cost of form work but

exclu. Cost of reinforcement for reinforced concrete work in : (A)

Foundation, footing, Base of columns and Mass concrete.

112 Providing & laying ordinary cement con.1:2:4 (1cement:2sand:4gra graded

stone agg. 20 mm nominal size) finishing smooth curing etc. comp. Incld.

Cost of form work but excl. Cost of reinforcement for R.C.C.

Work in : Up to G.L./P.L. (A) COLUMNS:

(1)Having c/s area up to 0.08s.mt 5.00 12123.79 C.M.

(2) Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt 5.00 10658.16 C.M.

(3) Having cross sectional area more than 0.12 sq. mt. 0.00 8692.87 C.M.

(1)Having c/s area up to 0.08s.mt 5.00 8593.80 C.M.

(2) Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt 5.00 7665.60 C.M.

(3) Having cross sectional area more than 0.12 sq. mt. 0.00 6578.07 C.M.

113 Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6 crushed stone agg. 5.00 3982.62 C.M.

20 m.m Nominal size)& curing comp. incl. cost of from work in: wall caps/

114 Steel work welded in built up sections, framed work including cutting,

hoisting, fixing in position and applying a priming coat of red lead paint

(A) in beams & joists channels angles, tees, flats with connection plates or 10.00 9047.86 Qtl.

angle cleats as in main & cross beams,hip & trussed purlins connected to

common raffers & the like.

(B)For work like chain link fencing, above compound wall etc. 0.00 9047.86 Qtl.

(C)in trusses & trussed purlins upto 25m.Span &15m.Overall height 0.00 9711.53 Qtl.

115 Providing and fixing G.I. chain link of 50mm x 50mm size x 10 guage thick 10.00 311.00 SM

with nuts, bolts, washer or G.I. pins, excluding M.S. angles etc.complete as per

relevent IS specification & directed by engineer in charge. (TATA or Jindal

116 Providing and fixing and fitting TATA or Jindal make G.I. barbed wire 10.00 125.00 Kg.

fencing with necessary barbed wire (12 x 14 guage, weight not less than

kg. / mt.) pins, hooks, excluding M.S. angles etc. complete as per relevent IS

specification.& directed by engineer in charge

117 Providing & fixing colouron galvaniced steel, zinc / aluminium allus 50.00 999.00 S.M.

coated sheet 0.5 mm. thick roofing fixed with gslvanised grom J or L hook

bolts and bolt 8mm dia with bituman and impet washer filled with white

lead etc. Excluding the cost of purlins rafter and trusses. (Tata / Jindal

118 Providing corrugated G.I. Sheets of class-3 roofing fixed with glavanished iron 10.00 727.13 S.M.

J or L Hooks, Bolts and nuts 8m diameter with bitumen and G.I. limpet

washer or G.I. limpet washer. filled with white lead complete excluding

the cost of purlins, Rafters and Trusses. (1) 0.80 mm thick sheet. (Tata /

Jindal or equivalent)

ITEM SOR 23- AMOUNT IN

119 Providing corrugated G.I. Sheets of class-3 roofing fixed with glavanished iron 10.00 1016.00 S.M.

J or L Hooks, Bolts and nuts 8m diameter with bitumen and G.I. limpet

washer or G.I. limpet washer. filled with white lead complete excluding

the cost of purlins, Rafters and Trusses. (1) 0.63 mm thick sheet. (Tata /

Jindal or equivalent)

120 Providing & fixing 150mm wide 450mm over all semicircular plain G.I. 10.00 561.27 R.M.

sheet class-3 gutter with iron brackets 40mm x 3mm size bolts, nuts,

washers etc. including marking necessary connection with rain water

(i) 0.8 mm thick

121 Providing ridges or hips 600mm over all in plain G.I. sheet fixed with G.I. 10.00 641.94 R.M.

"J" of "L" hooks bolts and nuts 8mm dia G.I. limpet and bitumen

washer complete (1) 0.80 mm thick

122 Providing & fixing 150mm wide 450mm over all semicircular plain G.I. 10.00 412.00 R.M.

sheet class-3 gutter with iron brackets 40mm x 3mm size bolts, nuts,

washers etc. including marking necessary connection with rain water

(i) 0.63mm thick

123 Providing ridges or hips 600mm over all in plain G.I. sheet fixed with G.I. 0.00 464.00 R.M.

"J" of "L" hooks bolts and nuts 8mm dia G.I. limpet and bitumen

washer complete (1) 0.63mm thick sheet

124 Providing & Fixing UV stabilise FRP Sheet roofing with overlapping the

main cladding on both edges. All fixing holes must be predrilled oversize as

specified for the sheet length and fastener being used. Fasteners must be fitted

with approved washers. Fixings should be tightened to ensure a weatherproof

seal but they must not be over tightened Side-lap fasteners must also be

installed at specified centers with the FRP sheet having clearance holes

provided as per the main fasteners Weatherproofing shall be provided at all

flashing points under the normal flashing by the fitting of a foam closure strip

to match the profile being used. Closure strips will be sealed to the sheet with

an appropriate non setting silicone sealant.

Excluding the cost of purlins rafter and trusses.

(a) 1.5 mm thick 10.00 992.00 SM

(b) 2 mm thick 5.00 1100.00 SM

125 Providing & Fixing Polycarbonate sheet roofing with surface of the sheet is

coated with an anti-UV Co-extrusion layer having good weather resistance, it

can maintain its optical properties and mechanical performance for a long time.

Fasting is usually done by screws. , The fastening screws should be inserted

about 500 mm apart and 300mm apart Along the supporting internal purlin and

edge pulin.All fixing holes with diameter at least 2 mm larger than screw must

be predrilled into each screw location. The screws should be 6mm diameter

with length according to sheet thickness and corrosion resistant, with at least

heavy duty hot dripped galvanized or stainless steel. Excluding the cost of

purlins rafter and trusses.

(a) 1.5 mm thick Solid Sheet 10.00 1261.00 SM

(b) 2 mm thick Solid Sheet 5.00 1510.00 SM

126 Providing & Fixing 80 mm dia M.S. pipe as vertical post are beded in 1:1.5:3 0.00 750.00 R.M.

concrete also horizontaly in line and connecting to purline angle etc by welding

rereting etc. (a) Medium duty "B" Class

127 Providing & Fixing 50 mm dia M.S. pipe as vertical post are beded in 1:1.5:3 0.00 485.00 R.M.

concrete also horizontaly in line and connecting to purline angle etc by welding

rereting etc. (a) Medium duty "B" Class

ITEM SOR 23- AMOUNT IN

128 Providing & fixing black board on walls of 1.8mt.x1.2mt size made up to 12 0.00 4193.00 NO.

mmth.B.W.P .Plywood (Brand Saras,Kitply,Uniply, Anchor,

Green,Wood Stock or century) fixed with teak wood beading of 65 mmx 50mm

size, rubbing & sanding comp., incl. applying two coats of black board paint

over a priming coat on plywood & French polishing the frame all round

etc. Comp. as per instruction of Engineer in charge (M.R.)

129 Providing & fixing Green board on walls of 1.8mt.x1.2mt size made up to 18 0.00 5195.00 NO.

mm th.ply (using IS 710 Marin ply) with 1 mm thick outside green

board & 0.8mm backside white laminate & with good Quality of

adhesive with appropriate fittings of Alluminium fittings or teak wood

bedding 65 mmx 50mm size, rubbing & sanding comp., as per instruction of

Engineer in charge (M.R.)

130 Providing & fixing White board on walls of 1.8mt.x1.2mt size of 12mm thick 0.00 4230.00 NO.

with appropriate fittings and Alluminium fittings comp., as per

instruction of Engineer in charge (M.R.)

131 Providing & Fixing Reading table size 8' x 4' and height 2'-6" with table top 0.00 14774.00 NO.

18mm thick (Brand Saras,Kitply,Uniply, Anchor, Green,Wood Stock or

century) commercial plywood with 1.0mm thick lamination sheet fitting with

teakwood moulding table top supported on 3" x 3" teakwood leg & 3" x 11/2"

teakwood framing top and bottom with french polish labour work hardware etc.

as per site in charge instruction and as per drawing.

132 Providing & Fixing Librarian table with 18mm thick commercial plywood 0.00 8390.00 NO.

(Brand Saras,Kitply,Uniply, Anchor, Green,Wood Stock or century) )with

1.0mm thick lamination sheet table top supported on 2" x 2" teakwood leg &

make 3 nos. drawers of 1' 3" width on both side with necessary french polish

hardware labour etc. as per site incharge instruction and as per drawing ( Size

4' x 2'-6" x 2'-6", all framing other then legs are teak wood of size 2" x 1")

133 Providing & Fixing simple 12mm thick commercial plywood (Brand 0.00 7690.00 NO.

Saras,Kitply,Uniply, Anchor, Green,Wood Stock or century) Rack of size 6'

x4' and depth 1'-6" 5 Nos. horizontal partition, supported 2" x 1" framing

with necessary french polish hardware labour etc. as per site incharge

instruction and as per drawing.

134 Providing & Fixing fitting commercial 8mm thick plywood (Brand 0.00 6745.00 NO.

Saras,Kitply,Uniply, Anchor, Green,Wood Stock or century) magazine stand

of Size 6' x 4' with 3" x 11/2" vertical supporting and adjustable lag support

and horizontal simple 2" x 1" teakwood patti for magazine support with

necessary french polish hardware labour etc.as per site in charges instruction

and as per drawing.

135 Providing and fixing stainless steel (Grade 304) railing made of Hollow 10.00 450.00 Kg

tubes, channels, plates etc., including welding, grinding, buffing, polishing and

making curvature (wherever required) and fitting the same with necessary

stainless steel nuts and bolts complete, i/c fixing the railing with necessary

accessories & stainless steel dash fasteners , stainless steel bolts etc., of

required size, on the top of the floor or the side of waist slab with suitable

arrangement as per approval of Engineer-incharge, (for payment purpose

only weight of stainless steel members shall be considered excluding

fixing accessories such as nuts, bolts, fasteners etc.).

136 Providing, supplying & placing precast RCC Woodeny benches as per given 10.00 3927.00 No.

specifications. (Seating plank dimensions : Seating Length of the Bench :

mm, Seating width of the Bench : 450 mm, Seating height of the Bench :

mm, Seating plank thickness : 60 mm, Total height of the Bench : 900 mm. )

M-30 grade of Concrete using vibration compaction process.

Benches consists of 2 Nos. L-shape base support in wooden texture and 1 Nos.

flate back and 1 Nos. bottom plank leg thickness :90 mm, Leg hight : 830 mm,

Leg width : 600 mm, backside plank width : 350 mm, backside plank length :

1380 mm, backside plank thickness : 60 mm.

ITEM SOR 23- AMOUNT IN

Bench top and back planks are treated with special anticorrosive, water proof

coating, prevent sun, rain, light and fungal attack, as to make surfaces glossy

and water proof.

The back rest should show as details given by SMC in embossed at casting

137 Providing & fixing Z - clamps at all floor levels of approved design to C.I.

S.C.I. or PVC pipes including the cost of cutting holes & making good the wall

etc. Complete - 100 mm dia as per architect instructions.

(C) 110 mm dia to upto 150 mm dia 10.00 90.00 No.

(C) 150 mm to 200 mm dia 10.00 98.00 No.

138 Providing and constructing sandwitch type Polish Kota Stone cooking 0.00 3010.00 Rmt.

platform 0.6 mt. wide & 0.75 mt. height, including one end side Polish

Kota stone (Double Polish) of 1.25 mt. height & front Polish Kota stone

patti of 10 cm wide, vertical partitions of half B.M. wall in C.M. 1:4

and 10mm th. plaster in 1:3 with finishing smooth with cement slurry as

required and Stainless Steel sink of 0.45 mt x 0.45 mt size of approved quality

and make with required all fitings & fixitures etc. comp as per

instruction given by site in charge at all floors.

139 Providing and constructing sandwitch type Granite stone cooking 0.00 3128.00 Rmt.

platform 0.6 mt. wide & 0.75 mt. height, including one end side granite stone

(Double Polish) of 1.25 mt. height & front granite stone patti of 10 cm wide,

vertical partitions of half B.M. wall in C.M. 1:4 and 10mm th. plaster in

1:3 with finishing smooth with cement slurry as required and Stainless

Steel sink of 0.45 mt x 0.45 mt size of approved quality and make with

required all fitings & fixitures etc. comp as per instruction given by site in

charge at all floors. (Basic rate of Granite Rs.1,200.00 / S.M.)

140 Providing and fixing 150 mm wide, approved quality chicken wire mesh 0.00 102.00 S.M.

(FRP / PVC)at junction of brick work and RCC work or two dissimilar

surfaces, at all heights fixed by nails, rowal plugs or tag by cement mortar 1:3

before applying the plaster, including curing, scaffolding all complete as

141 Providing and filling Epoxy grout of approved or suggested brand by 0.00 40.00 Rmt.

consultant / Engineer in charge in 4mm to 6mm thick tiles joint including

spacer with cleaning of joint by vacuum or blower etc

142 Providing and fixing rebar of following diameter using chemical grout of

Swanchore/Hilti/Fischer or equivalent make including cost of all

equipments, tools, material, labour, etc. Standard procedure as

mentioned in manufacturer's specifications shall be strictly followed, which

shall be submitted and got approved from the authority prior to start of

work. The rate shall also include cost of drilling of hole of required

diameter and depth as mentioned in manufacturer's specification,

cleaning the hole with required air blower and other necessary tools and

tackles, positioning, providing and grouting chemical, allied fixtures and

fasteners, etc. but excluding the cost of reinforcing bar etc. complete. Item

includes necessary scaffolding, staging, labour, tools and equipments, etc.

complete as directed by the engineer-in-charge.

ITEM SOR 23- AMOUNT IN

143 Carring out plinth treatment to post construction / existing structure by 10.00 82.89 Smt.

spraying chemical solution for termite control treatment including labour

and material consistment with ISI specification. Using Chlordene and

Chiorpurfiles 20 EC. As per 6131_paret-II Consentration Weight one

percent is recommended i.e. one litre 20 EC chemical emulsion with 19 liter

give 1% concrentration inclusive of one litre chemical emulsion

appication at the rate of 5 litre chemical / Sqm of surface is recommended as

144 Providing and fixing rolling shutters of approved make made of 80 mm wide 10.00 3503.41 Smt.

M.S. laths inter locked together through their entire lenght and jointed

together at the ends by end locks mounted on specially designed pipe shaft

with bracket plates, guide channels and arrangements for inside and

outside locking with push-pull operation including the cost of hood cover

and spring etc. complete (A) Shutters having width below 3.5 M.

145 Providing and fixing rolling shutters of approved make made of 80 mm wide 1.00 4495.02 Smt.

M.S. laths inter locked together through their entire lenght and jointed

together at the ends by end locks mounted on specially designed pipe shaft

with bracket plates, guide channels and arrangements for inside and

outside locking with push-pull operation including the cost of hood cover

and spring etc. complete. (B) Shutters having width 3.5 M and above

146 Providing and laying broken china mosaic flooring for terrace using 12mm to 10.00 747.29 Sqm.

20mm broken pieces of glazed tiles to be laid over cement mortar 1:3 to plain

or slope and to be tempered to bring mortar creme out upto surface

using white cement including rounding off junctions and extending them upto

15 cm along the wall clearing with water and oxalic acid etc. as directed.

147 Providing and Fixing Hollow steel Sections Framed Work including 10.00 126.00 Kg

Cutting, Hoisting, Welding & Fixing in position Purlin, Main Chord etc. as per

Engineer-in-charge.TATA / JINDAL / ASIAN Make

148 Providing cement vata (10 cm x 10 cm size) quarter round in cement 10.00 23.68 Rmt.

mortar 1:1 including neat cement finishing, watering etc. complete.

149 White Washing with lime on wall surface to give an even shade & surface

incl. throughly brooming the surface to remove dirt, dust mortar drops & losse

scales of lime wash & other foreign matter Two coats.

(A) walls 10.00 12.41 S.M.

(B) Ceiling 10.00 13.53 S.M.

---do Extra Subsequant coat over above Item

(A) walls 0.00 5.73 S.M.

(B) Ceiling 0.00 6.21 S.M.

150 Colour washing with lime on wall over & incl. a primary coat of white

washing to give an even shade & surface incl. throughly brooming the

surface to remove all dirt, dust mortar drops & loose scales of lime wash &

other foreign matter.Two coats.

(A) walls 0.00 12.41 S.M.

(B) Ceiling 0.00 14.65 S.M.

---do Extra Subsequant coat over above Item

(A) walls 0.00 7.96 S.M.

(B) Ceiling 0.00 10.04 S.M.

151 Distempering two coats with oil bound washable distemper of approved

brand & manufacture & of required shade on wall surface to give an even

shade over and & including a priming coat of alkali resistance primer of

approved brand after throughly brushing the surface to give an even shade after

throughly brushing the surface free from mortar droppings and other

foreign matter and also including preparing the surface even and smooth.

(A) walls 10.00 72.23 S.M.

(B) Ceiling 10.00 80.35 S.M.

ITEM SOR 23- AMOUNT IN

---do Extra Subsequant coat over above Item

(A) walls 0.00 30.39 S.M.

(B) Ceiling 0.00 33.57 S.M.

152 Apply two coats of putty and two coats of primer of approved brand and 10.00 40.59 S.M.

manufacture on new wall surface to give an even shade including thoroughly

brushing the surface free from mortar dropping and other matter and sand

papered smooth.

153 Wall painting (two coats) with plastic emulsion paint of approved brand and 10.00 79.39 S.M.

manufacture on undecorated wall surface to give an even shade

including throughly brushing the surface free from mortar droppings and other

foreign matter and sand papered smooth.

For every subsequent coat Extra over item no.above 0.00 33.72 S.M.

154 Distempering two coats on previously distempering wall (without 10.00 57.59 S.M.

primer) with oil bound washable distemper of approved brand &

required shade on wall surface to give an even shade after throughly

brushing the surfaces clean of all grease, dirt loose places of sceles &

also including preparing the surface even and smooth.

155 Applying Priming coat over new steel and other metal surface after over and 10.00 35.00 S.M.

including preparing the surface by throughly cleaning oil, grease dirt and other

foreign matter and scoured with brushed fine steel wool, scrapers and sand

paper with ready mixed priming paint brushing red lead.

156 Painting two coat (excluding priming coat) on new steel and other metal 10.00 65.31 S.M.

surface with synthetic enemal paint, burshing to give an even shade

including cleaning the surface of all dirt, dust and other foreign matters.

157 Painting one coat (excluding priming coat) on Previously Painted steel and 10.00 38.03 S.M.

other metal surface with synthetic enemal paint, burshing to give an

even shade including cleaning the surface of all dirt, dust and other foreign

For every subsequent coat Extra over item no.above 0.00 38.18 S.M.

158 Applying Priming coat over new wood & wood surface after & 100.00 41.05 S.M.

incl.preparing the surface by throughly cleaning oil grease dirt & other

foreign matter sand papering & knetting Really mixed paint brushing

priming for enamel.

159 Painting two coats (excluding priming coat) on New wood & wood 100.00 88.45 S.M.

based surface with enamel paint to give an even shade & surface incl.

cleaning of all dirt, dust & other foreign matter.

160 Painting two coats (excluding priming coat) on previously painted wood & 100.00 45.18 S.M.

wood based surface with enamel paint to give an even shade & surface incl.

cleaning of all dirt, dust & other foreign matter.

161 Polishing with french polished on New wood & wood based surface to 10.00 135.70 S.M.

give an even surface incl. cleaning the surface of all dirt, dust & sand

papered smooth incl. a cost of wood filler.

162 Polishing with french polished on previously polishing wood & wood 10.00 69.84 S.M.

based surface to give an even surface incl. cleaning the surface of all dirt, dust

& sand papered smooth incl. a cost of wood filler.

163 Painting two coats of enamel paint over priming coat (including priming 100.00 90.00 S.M.

coat) on wall after removing entire surface dirt, dust foreign matter & also incl.

preparing the surface even & sand papered smooth etc. comp.(M.R.)

164 Painting two coats of enamel paint (Excluding priming coat) over 100.00 60.00 S.M.

previously painted wall after removing entire surface with even shade

& surface after removing dirt, dust foreign matter etc. comp.(M.R.)

ITEM SOR 23- AMOUNT IN

165 Providing & applying two coats of weather shield max paint (3 coats may be 100.00 82.00 S.M.

required in case of darker colours.)of ICI Dulux or Apex Ultima of Asian

Paint including applying exterior acrylic primer coat as per manufacturers

specification and directions in shade and colour approved by architects, on

exterior surfaces of the building including scaffolding, preparing the surface,

watering, curing etc. complete and as directed by the architects and

Surface Preparation :

surface is thoroughly clean, dry and free from all loose dirt, chalk, grease,

fungi, algae and flaking paint. This can be achieved by brushing with a wire/

stiff coir brush, followed by water jetting if required. Fill up all minor cracks

and defects with white cement and sand mixture in the ratio 1:3. For

application on previously painted wall, previous coatings of paint must

be thoroughly scraped off and Clean the surface thoroughly using wire brushes.

Apply a liberal coat of exterior acrylic primer and allow it to dry for 4-5 hours.

Application of putty is not recommended.

Minimum 4-6 hours duration is required between each coat of weather shield

166 Providing and fixing window having extruded aluminum Colour anodized 10.00 2140.33 S.M.

section frame main outer size 127mm x 38.10mm x 1.35mm @wt. 1.384kg/m,

horizontal Four track member size 122.20mm x 31.75mm x 1.10mm@ wt

1.205 kg/m, vertical member of size 122.20mm x 31.75mm x 1.50mm @1.398

kg/mt with sliding shutters of horizontal member size 40mm x 18mm x

1.29mm@ 0.456kg/mt ,vertical member of size 40mm x 18mm x 1.29mm @

0.456 kg/mt with 5 mm thick transparent bronze colour tinted float glass with

powder coated aluminum fittings and fixtures and transparent silicon sealant

glass fixing to frame as per details etc complete for window.

(A) Same as above but Colour anodized 10.00 2140.33 S.M.

167 Providing and fixing window having extruded aluminium Powder Coated 10.00 1591.87 S.M.

section frame main outer size 95 mm x 24 mm x 1.17 mm (of jindal section

no:2459 @ Wt. of 0.738 Kg/mt), horizontal Three track member size 92 mm x

31.75 mm x 1.30 mm (of jindal section no;8688, @ Wt. 1.07 Kg/mt),

vertical member of size 92 mm x 31.75 mm x 1.50 mm (of jindal section

no:8933, @ Wt. 1.06 Kg/mt) with sliding shutters of horizontal member size

40 mm x 18 mm x 1.29 mm (of jindal section no:8947 @ wt. of 0.456 kg/mt),

vertical member of size 40 mm x 18 mm x 1.29 mm (of jindal section no:8949

@ wt. of 0.456 kg/mt) with 5 mm thick transparent bronze colour tinted float

glass with powder coated aluminium fittings & fixtures and transparent silicon

sealant glass fixing to frame as per details etc.

(A) Same as above but Colour anodized 10.00 1591.87 S.M.

168 Providing and fixing window having extruded aluminium Powder Coated 10.00 1705.67 S.M.

section frame main outer size 63.50 x 38.10 x1.95 mm (of Jindal section

no.4605, @ Wt. 1.094Kg/mt) horizontal Two track member size 61.85 mm x

31.75 mm x 1.20 mm (of jindal section no:8687, @ Wt. 0.695 Kg/mt.) vertical

member of size 61.85 mm x 31.75 mm x 130 mm (of jindal section no:8758 @

wt. of 0.659 kg/mt) with sliding shutters of horizontal member size 40 mm x18

mm x 1.29 mm ( of jindal section no:8949, @ Wt. of .456 Kg/mt) vertical

member of size 40 mm x 18 mm x 1.29 mm (of jindal section no:8947, @ Wt.

of 0.456 Kg/mt/section 8948, @ Wt. of 0.457 Kg/mt) with 5 mm thick

tranparent bronze colour tineted float glass with powder coated aluminium

fittings and fixtures and transparent silicon sealant glass fixing to frame as per

details etc. complete for window.

(A) Same as above but Colour anodized 10.00 1705.67 S.M.

ITEM SOR 23- AMOUNT IN

169 Providing and fixing standared extruded ofalluminium section of size 10.00 2414.00 S.M.

63mm x 38.10mm x1.2mm , @ Wt. 0.643 Kg/mt with colour Powder Coated

alluminium frame for ventilation with 5 mm thick frosted glass as details etc

complete for Ventilation

(A) Same as above but Colour anodized 10.00 2414.00 S.M.

170 Providing and fixing standared extruded of aluminium section of size 61 x 37.0 10.00 2336.00 S.M.

x0.90 mm (of Jindal section no.14080, @ Wt. 0.471 Kg per mt) with

Powder Coated alluminium frame with 5 mm thick transparent bronze

colour tinted float glass as

details etc. complete for fix window.

(A) Same as above but Colour anodized 10.00 2336.00 S.M.

171 Providing & fixing partly panel & partly glass Powder Coated Aluminium 10.00 3237.00 S.M.

doors with aluminium section of Hindalco, Jindal, Narmada, Banco or

Equivalent approved make having Poder Coated outer frame Leg Partition

section of 63.50 mm x 38.10 mm having weight 1.158 kg. / R.M. shutter

section having size 83.5 mm x 44.45mm ( top & bottom: 1.384 kg./rmt.

and middle 1.139 kg./rmt.) door vertical 47.62mm x 44.45 mm (

vertical:0.881 kg./rmt. & top hing side:0.974 kg./mt.), Glazing Clip

(Jindal Section No. 19370 Wt. 0.109 Kg./ Mt.) with 5mm thick sheet

glass in acid frogting and 12 mm thick prelaminated sheet of Greenlam,

Panama or archid make as approved by Engineer-in-charge including fixing

brass pivot, handle, lock etc. complete.

(A) Same as above but Colour anodized 10.00 3237.00 S.M.

172 Providing & fixing Powder Coated Aluminium partly glazed and partly 10.00 2400.00 S.M.

panelled partition using medium duty sections of Hindalco,Zindal,

Narmada, Banco or Equivalent approved make having section 63.50 mm

x 38.10mm ( Frame-.758 kg/rmt & Middle section- 0.819 Kg./rmt), Galzing

Clip with 5 mm thick clear float glass of approved make including all other

necessary fittings and fixtures. Entire work will have to be made water proof

using necessary rubber sectioned wherever required. Gaps all round the frame

to be filled with approved water proof sealent. Bottom portion of doors both

side to be covered with 12mm thick prelaminated particle board of

approved make and quality and as per design.

(A) Same as above but Colour anodized 10.00 2400.00 S.M.

173 Demolition including stacking of serviceable materials with all lead and lift. 10.00 1110.75 C.M.

174 Demolition of brick work and stone masonry including stacking of serviceable 10.00 577.92 C.M.

materials and disposal of unserviceable materials with all lead and lift. (i) On

175 Removing and scraping of old deteriorated plaster of any thickness from wall / 10.00 20.55 S.M.

RCC member including stacking of serviceable material and disposal of

unserviceable from site of work with all lead and lift.

176 Dismentling steel work including distempering and stacking the maerials with 10.00 3.85 Kg.

all lead and lift.

177 Dismentling door, windows, ventilators etc. (wood or steel) shutters including 5.00 197.09 EAC

chowkhats architraces, holdfasts and other attacement etc. complete and H

stacking them within all lead and lift. (i) Not exceeding 3 Sq.M. in area.

178 Dismentling door, windows, ventilators etc. (wood or steel) shutters including 5.00 263.90 EAC

chowkhats architraces, holdfasts and other attacement etc. complete and H

stacking them within all lead and lift. (i) Exceeding 3 Sq.M. in area.

179 Dismentaling of sheet roofing inlcuding ridges, Hips, Valleys, Gutters etc. 4.97 50.11 S.M.

stacking of serviceable materials and disposal of unserviceable materials with

all lead and lift. (i) G.I. sheet roofing.

180 Removing of Collapsible Gate 5.00 101.00 No.

181 Removing of Rolling Shutter 5.00 101.00 EAC

ITEM SOR 23- AMOUNT IN

182 Dismentaling tiled of stone floors laid in mortar including stacking of 50.00 50.11 S.M.

serviceable materilas and disposal of unserviceable materials with all lead and

A Kota stone flooring and steps 5.00 50.11 S.M.

B Marble 5.00 50.11 S.M.

C Tiles flooring / Dedo 5.00 50.11 S.M.

D Granite flooring and steps 5.00 50.11 S.M.

183 Dismentling C.I. pipes G.S.W. pipes and A.C. rain water pipes with fittings

and clamps including stacking the materials with all lead and lift. (for any dia,

GI pipe (15mm) 0.00 78.51 Rmt.

GI pipe (25 mm) 0.00 78.51 Rmt.

GI pipe (32 mm) 0.00 78.51 Rmt.

GI pipe (40 mm) 0.00 78.51 Rmt.

GI pipe (50 mm) 0.00 78.51 Rmt.

UPVC pipe 0.00 78.51 Rmt.

184 Dismentling wood work, wrought framed and fixed in frames trusses including 0.00 1847.34 C.M.

stacking the materials with all lead and lift.

185 Dismentling barbed wire in fencing including making rolls and also including 10.00 70.15 Rmt.

dismentling fencing posts including all earth work concrete in base and making

good the disturbed fround stacking useful materials as directed and disposing

as directed and disposing of the unserviceable materials with all lead and lift.

186 Dismantling sanitary fittings like wass basin, W.C. pan Indian and European 10.00 425.93 EAC

type, flushing tank etc. including stacking the materials with all lead and lift. H

187 Sanitory fitting like bib tap, flush cock, pillar tap, angle cock etc. 10.00 50.50 EAC

188 Demolition of terrace including stacking serviceable materials and disposal of 10.00 66.81 S.M.

unserviceable materials with all lead and lift. (i) Brick tile covering.

189 Dismentaling of sheet roofing including ridges, Hips, Valleys, Gutters etc. 10.00 56.79 S.M.

stacking of serviceable materials and disposal of unserviceable materials with

all lead and lift. (ii) A.C. sheet roofing.

190 Dismentaling of Kerb. 10.00 15.15 Rmt.

191 Box Cutting the road surface to proper slope and camber for making base 10.00 109.41 C.M.

includinng removing the excavated stuff and depositing on the road side slope

as directed up to 50 mt. lead.

192 Preparation of subgrade with Compacting, Levelling and consolidation of 10.00 9.00 S.M.

subgrade with miniroller /plate vibrator machine including watering and filling

in depressions which occur during the process as directed by engineer in

193 Providing & filling with Mix soil in layers of 20 cm. Th'. Incl. watering, 10.00 225.00 C.M.

ramming & consolidation etc. complete.

194 Supplying & filling fine sand(pana) in 75 mm / 100 mm / 150 mm 100.00 1016.00 C.M.

compacted thickness over the base including necessary compaction, watering

etc. complete. Item includes leveling by using vibratory plates compacted

machine and as directed by engineer in charge.

195 Providing and laying cement concrete 1:5:10 (1- Cement : 5- Coarse sand : 10- 10.00 2606.92 C.M.

hand broken stone aggregates 40 mm nominal size) and curing complete

excluding cost of formwork in (A) Foundation and Plinth

196 Providing 100mm thick readymade C.C. kerb of strength M-20 (size 300mm x 100.00 228.00 R.M.

380mm) purchased from SMC's approved paverblock manufacturer & setting

in line, level and in truly vertical position, including filling joints in C.M. 1:1

(1 part of cement : 1 part of stone dust) smooth pointing in C.M. 1:1 (1 part of

cement : 1 part of coarse sand) including watering etc. complete and as directed

by engineer in charge.

For rounding at the edge of footpath (For fanning portion) 50.00 274.00 R.M.

ITEM SOR 23- AMOUNT IN

197 Providing interlocking type Rubber moulded cement concrete paver block of 50.00 524.00 S.M.

approved shape, design & colour having 60mm thickness (M-35) purchased

from SMC's approved paverblock manufacturer only & fixing of fine sand

bedding. Item includes levelling by using vibratory plates compacted machine.

Item also includes all materials, labour, equipments, tools, plants, watering,

cleaning etc. complete.

Without colour 50.00 524.00 S.M.

198 Providing & fixing interlocking type Cement Concrete paver block of 2.00 553.00 S.M.

approved shape & design having 60 mm thickness (M-40) purchased from

SMC's approved paverblock manufacturer only on fine sand bedding. Item

includes leveling by using vibratory plates compacted machine. Item also

includes all materials, Labour, euipments, tools, plants, watering, cleaning etc.

For Road Junction 80 mm thick ( M-50) 2.00 714.00 S.M.

199 Providing & laying Granular sub base (GSB)confirming to Grading-II of 2.00 1469.00 C.M.

Table 400.0 of compacted thick of 150mm with specified graded stone

metal and sand mixed in place and laid with mechanical means spreading with

motor grader and compacting with vibratory roller having minimum 80

KN static weight to acheve desired density of 98% of MDD including all

material, labour, machinery with all leads and lift etc. complete.

200 Providing & laying cement concrete Pavement using 1:1.5:3 (1 2.00 5981.00 C.M.

cement:1.5 sand:3 graded stone agg. 20 mm nominal size) & Vaccuum

Dewatering technique including floating surface with a skim powder floater,

curing etc. complete.

201 Providing & laying cement concrete Pavement using 1:2:4 (1 cement:2 sand:4 2.00 5245.25 C.M.

graded stone agg. 20 mm nominal size) & Vaccuum Dewatering technique

including floating surface with a skim powder floater, curing etc. complete.

202 Providing and laying 200 micron plastic sheet on prepared sub base For 2.00 26.00 S.M.

203 Cutting of Groove 5 to 7 mm thick in VDS for depth 1/3 of total thickness with 2.00 50.00 R.M.

filling of epoxy sealent as directed by engineer in charge

204 Providing & Fixing Dustbin as per drawing & specification directed by 15.00 9421.00 NO.

engineer in charge.

205 Providing, Supplying and Fixing Bearing inclusive all Labour and Material etc. 35.00 300.00 NO.

for AIR WALKER, AERO RIDER, HIP TWISTER, ELLIPTICAL CROSS

TRAINER, BIG ARM WHEEL, SMALL ARM WHEEL, LEG EXTENSION,

SIT UP BOARD, LEG LIFT STATION, CHEST PRESS, WALKING

206 Providing, Supplying and Fixing Nut Bolt inclusive all Labour and Material 35.00 100.00 NO.

etc. for AIR WALKER, AERO RIDER, HIP TWISTER, ELLIPTICAL

CROSS TRAINER, BIG ARM WHEEL, SMALL ARM WHEEL, LEG

EXTENSION, SIT UP BOARD, LEG LIFT STATION, CHEST PRESS,

207 Oiling and Greasing work inclusive all Labour and Material etc. for AIR 35.00 100.00 NO.

WALKER, AERO RIDER, HIP TWISTER, ELLIPTICAL CROSS TRAINER,

BIG ARM WHEEL, SMALL ARM WHEEL, LEG EXTENSION, SIT UP

BOARD, LEG LIFT STATION, CHEST PRESS, WALKING BARREL

208 Welding work inclusive all Labour and Material etc. for AIR WALKER, 35.00 200.00 NO.

AERO RIDER, HIP TWISTER, ELLIPTICAL CROSS TRAINER, BIG ARM

WHEEL, SMALL ARM WHEEL, LEG EXTENSION, SIT UP BOARD, LEG

LIFT STATION, CHEST PRESS, WALKING BARREL

209 Providing, Supplying and Fixing LLDPE Sheet inclusive all Labour and 35.00 1200.00 NO.

material etc. for AERO RIDER

210 Providing, Supplying and Fixing Rotating Metal Disk inclusive all Labour and 35.00 3000.00 NO.

Material etc.for HIP TWISTER

ITEM SOR 23- AMOUNT IN

211 Providing, Supplying and Fixing Pipe Cap inclusive all Labour and Material 35.00 300.00 NO.

etc. for HIP TWISTER

212 Providing, Supplying and Fixing Handle (25 mm Dia.) inclusive all Labour 35.00 2000.00 NO.

and Material etc. for HIP TWISTER

213 Providing, Supplying and Fixing BARREL inclusive all Labour and Material 35.00 15000.00 NO.

etc. for WALKING BARREL

214 Providing, Supplying and Fixing Wheel inclusive all Labour and Material etc. 35.00 3350.00 NO.

for BIG ARM WHEEL, SMALL ARM WHEEL

215 Providing, Supplying and Fixing Handle (25 mm Dia.) inclusive all Labour 35.00 3800.00 NO.

and Material etc. for BIG ARM WHEEL, SMALL ARM WHEEL

216 Providing, Supplying and Fixing GI/HDPE cap inclusive all Labour and 35.00 300.00 NO.

Material etc. for LEG EXTENSION

217 Providing, Supplying and Fixing FRP/LLDPE cap inclusive all Labour and 35.00 4250.00 NO.

Material etc. for SIT UP BOARD

218 Providing, Supplying and Fixing GI/HDPE cap inclusive all Labour and 35.00 300.00 NO.

Material etc. for CHEST PRESS

219 Providing, Supplying and Fixing Rubber Handle Grip inclusive all Labour and 35.00 250.00 NO.

Material etc. for CHEST PRESS

220 Repair work of Railing of Lasarpatti. 25mm Dia. M.S.pipe 5.00 250.00 Ft.

221 Platform of Lasarpatti - 2.00 3800.00 No.

18 Gauge M.S. Sheet

222 Lasarpatti's Sliding M.S. Letter - 0.00 1000.00 Ft.

1.50 ft. Wide -

18 Gauge M.S. Sheet

223 Lasarpatti's F.R.P. Sheet. (1.50 ft. Wide) 0.00 1400.00 Ft.

224 Colour work of Lasarpatti 1.00 2500.00 No.

225 Sheet of Marry go Round 0.00 1900.00 No.

226 Platform of Marry go Round. (4 ft. Dia.) 1.00 5000.00 No.

227 Railing of Marry go Round. (25 mm Dia. M.S. Pipe) 0.00 1000.00 No.

228 Bearing of Marry go Round 2.00 1800.00 No.

229 Colour of Marry go Round 0.00 1300.00 No.

230 G.I. Pipe (For Swings and Lasarpatti) - 0.00 1400.00 Ft.

1.5 mm Thickness

231 Welding work of Playing Equipments 10.00 300.00 No.

232 Swing Bracelets. (6" Ht.) 5.00 1000.00 No.

233 Swing Nut Bolts 10.00 200.00 No.

234 Swing Clamp 0.00 700.00 No.

235 Colourwork of Swing 0.00 2500.00 No.

236 Swing Chain (10 mm thick) 10.00 300.00 Ft.

237 Swing Sheet (F.R.P.) 0.00 1500.00 No.

238 Swing Sheet (Rubber Belt) 0.00 1500.00 No.

239 Swing Sheet (M.S. Sheet) 0.00 700.00 No.

240 Cement Concrete Work of Playing Equipments 8.00 1200.00 No.

1' x 1' x 1' Excavation

Note :-The Rates mentioned in SCHEDULE-B are excluding GST

SIGN OF CONTRACTOR EXECUTIVE ENGINEER

SOUTH WEST (ATHWA) ZONE

SURAT MUNICIPAL CORPORATION