REPAIRS OF WOODEN FURNITURE AND POLISHING AT MIL STN KOTA

Amount

Chair Dining FD 16, 203, 228, 279 Removing of old unserviceable following parts from chair dining and supply & fixing new same parts made of first class hard wood (Shisham wood) duly finished with existing shape and fixed with bamboo pin and fevicol & including tightening of other joints and applying french polishing on all exposed wooden surfaces & including cleaning and preparing the surface including a coat of wood filler with one coat of french polish, complete all as specified & directed and shown on drawings: -

Front leg (Left or Right) required as per drg.

Rear leg (Left or Right) required as per drg.

Front/back/right/left side rail with holes for canning required as per drg.

Stiffner bottom (side/centre) required as per drg.

Back rest required as per drg.

Removing of old unserviceable/broken shoe from chair dining and S&F new hard PVC shoe of superior quality, fixed with screw, complete all as specified, directed and shown on drawings.

Recaning of repaired chair dining with best quality of approved plastic cane of white or cream ivory shade, 2 mm wide and 0.4 mm thick, complete all as specified, directed and shown on drawings.

Applying french polishing with high gloss & including cleaning and preparing the surface with one or more coats to entire exposed wooden surfaces of repaired chair dining (new and old parts), complete all as specified and directed.

Chair Writing FD - 20, 202, 250, 280 Removing of old unserviceable following parts from chair writing and supply & fixing new parts made of first class hard wood (Shisham wood) duly finished with existing shape and fixed with bamboo pin and fevicol & including tightening of other joints and applying french polishing on all exposed wooden surfaces of replaced part including cleaning and preparing the surface including a coat of wood filler with one coat of french polish, complete all as specified, directed and shown on drawings: -

Front leg (Left or Right) required as per drg.

Rear leg (Left or Right) required as per drg.

Front/back/right/left side rail with holes for canning required as per drg.

Stiffner bottom (side/centre) required as per drg.

Back rest required as per drg.

Hand rest (Arms) required as per drg.

Removing of old unserviceable/broken shoe from chair writing and S&F new hard PVC shoe of superior quality, fixed with screw, complete all as specified, directed and shown on drawings.

Recaning of repaired chair writing with best quality of approved plastic cane of white or cream ivory shade, 2 mm wide and 0.4 mm thick, complete all as specified, directed and shown on drawings.

Applying french polishing with high gloss including cleaning and preparing the surface with one or more coats to entire exposed wooden surfaces of repaired chair writing (new and old parts), complete all as specified and directed.

Chair Easy FD - 17, 201, 229 Removing of old unserviceable following parts from chair easy and supply & fixing new parts made of first class hard wood (Shisham wood) duly finished with existing shape and fixed with bamboo pin and fevicol including tightening of other joints, and applying french polishing on all exposed wooden surfaces of replaced part including cleaning and preparing the surface including a coat of wood filler with one coat of french polish, complete all as specified, directed and shown on drawings: -

Front leg (Left or Right) required as per drg.

Rear leg (Left or Right) required as per drg.

Front/back/right/left side rail with holes for canning

Back rail (Top/bottom/left/right) of back frame with holes for canning as per drg

Stiffner bottom required as per drg.

Hand rest (Arms) required as per drg.

Removing of old unserviceable/broken shoe from chair easy and S&F new hard PVC shoe of superior quality, fixed with screw, complete all as specified, directed and shown on drawings.

Recaning of repaired chair easy with best quality of approved plastic cane of white or cream ivory shade, 2 mm wide and 0.4 mm thick, complete all as specified, directed and shown on drawings.

Applying french polishing with high gloss including cleaning and preparing the surface with one or more coats to entire exposed wooden surfaces of repaired chair easy (new and old parts), complete all as specified and directed.

Table centre FD-29, 235, 274 Removing of old unserviceable following parts from table centre and supply & fixing new parts made of first class hard wood (Shisham wood) duly finished with existing shape and fixed with bamboo pin and fevicol including tightening of other joints, and applying french polishing on all exposed wooden surfaces of replaced part including cleaning and preparing the surface including a coat of wood filler with one coat of french polish, complete all as specified, directed and shown on drawings: -

Front or back rail required as per drg

Side rail (Left or Right) required as per drg

Leg required as per drg

Stiffener (Side or Centre) required as per drg

Removing of old unserviceable/broken shoe from table centre and S&F new hard PVC shoe of superior quality, fixed with screw, complete all as specified, directed and shown on drawings.

Removing of unserviceable/ broken top from table centre and supply & fixing new top made of 17/18 mm thick prelaminated MDF board, exterior grade, ISI marked, duly fixed with 4 mm thick first class hard wood (Shisham wood) beading allround the top, complete all as specified, directed and shown on drawings.

Applying french polishing including cleaning and preparing the surface with one or more coats to entire exposed wooden surfaces of repaired table centre (new and old parts), complete all as specified and directed.

Teapoy FD - 34, 232, 278 & 382 Removing of old unserviceable following parts from teapoy FD and supply & fixing new parts made of first class hard wood (Shisham wood) duly finished with existing shape and fixed with bamboo pin and fevicol including tightening of other joints, and applying french polishing on all exposed wooden surfaces of replaced part including cleaning and preparing the surface including a coat of wood filler with one coat of french polish, complete all as specified, directed and shown on drawings: -

Leg of teapoy required as per drg

Front or back rail required as per drg

Side (Left or right) rail required as per drg

Stiffener (side or centre) required as per drg

Removing of old unserviceable/broken shoe from teapoy FD and S&F new hard PVC shoe of superior quality, fixed with screw, complete all as specified, directed and shown on drawings.

Removing of unserviceable/ broken top from teapoy FD and supply & fixing new top made of 17/18 mm thick prelaminated MDF board, exterior grade, ISI marked, duly fixed with 4 mm thick first class hard wood (Shisham wood) beading allround the top, complete all as specified, directed and shown on drawings.

Applying french polishing with high gloss including cleaning and preparing the surface with one or more coats to entire exposed wooden surfaces of repaired teapoy FD (new and old parts), complete all as specified and directed.

Table Peg FD- 25, 236, 266, 277, 384 Removing of old unserviceable following parts from table peg and supply & fixing new parts made of first class hard wood (Shisham wood) duly finished with existing shape and fixed with bamboo pin and fevicol including tightening of other joints, and applying french polishing on all exposed wooden surfaces of replaced part including cleaning and preparing the surface including a coat of wood filler with one coat of french polish, complete all as specified, directed and shown on drawings: -

Front or back rail of table peg required as per drg

Side rail ( Left or Right) required as per drg

Leg required as per drg

Stiffener bottom (side/centre) required as per drg

Removing of old unserviceable/broken shoe from table peg and S&F new hard PVC shoe of superior quality, fixed with screw, complete all as specified, directed and shown on drawings.

Removing of unserviceable/ broken top from table peg and supply & fixing new top made of 17/18 mm thick prelaminated MDF board, exterior grade, ISI marked, duly fixed with 4 mm thick first class hard wood (Shisham wood) beading allround the top, complete all as specified, directed and shown on drawings.

Applying french polishing including cleaning and preparing the surface with one or more coats to entire exposed wooden surfaces of repaired table peg (new and old parts), complete all as specified and directed.

Table 3' x 2' with or without drawer FD-41, 224, 283, 42, 223, 231, 284 Removing of old unserviceable following parts from table 3'x2' and supply & fixing new parts made of first class hard wood (Shisham wood) duly finished with existing shape and fixed with bamboo pin and fevicol including tightening of other joints, and applying french polishing on all exposed wooden surfaces of replaced part including cleaning and preparing the surface including a coat of wood filler with one coat of french polish, complete all as specified, directed and shown on drawings: -

Front or back rail required as per drg

Side rail (Left or Right) required as per drg

Leg required as per drg

Stiffener (side/centre) required as per drg

New drawer & including aluminum anodised knob as per drg

Removing of old unserviceable/broken shoe from table 3'x2' and S&F new hard PVC shoe of superior quality, fixed with screw, complete all as specified, directed and shown on drawings.

Removing of unserviceable/ broken top from table 3'x2' and supply & fixing new top made of 17/18 mm thick prelaminated MDF board, exterior grade, ISI marked, duly fixed with 4 mm thick first class hard wood (Shisham wood) beading allround the top, complete all as specified, directed and shown on drawings.

Applying french polishing including cleaning and preparing the surface with one or more coats to entire exposed wooden surfaces of repaired table 3'x2' (new and old parts), complete all as specified and directed.

Table dining 6 Persons FD- 273, 376 Removing of old unserviceable following parts from table dining 06 pers and supply & fixing new parts made of first class hard wood (Shisham wood) duly finished with existing shape and fixed with bamboo pin and fevicol including tightening of other joints, and applying french polishing on all exposed wooden surfaces of replaced part including cleaning and preparing the surface including a coat of wood filler with one coat of french polish, complete all as specified, directed and shown on drawings: -

Front or back long rail required as per drg

Side rail (Left or Right) required as per drg

Leg for table dining 06 pers required as per drg

Stiffener (bottom support of table top) required as per drg

Wooden corner (cleat) sitffener required as per drg

Removing of old unserviceable/broken shoe from table dining 6 pers and S&F new hard PVC shoe of superior quality, fixed with screw, complete all as specified, directed and shown on drawings.

Removing of unserviceable/ broken top from table dining 6 pers and supply & fixing new top made of 17/18 mm thick prelaminated MDF board, exterior grade, ISI marked, duly fixed with 4 mm thick first class hard wood (Shisham wood) beading allround the top, complete all as specified, directed and shown on drawings.

Applying french polishing including cleaning and preparing the surface with one or more coats to entire exposed wooden surfaces of repaired table dining 6 pers (new and old parts), complete all as specified and directed.

Table dining 8 Persons FD- 273, 376 Removing of old unserviceable following parts from table dining 08 pers and supply & fixing new parts made of first class hard wood (Shisham wood) duly finished with existing shape and fixed with bamboo pin and fevicol including tightening of other joints, and applying french polishing on all exposed wooden surfaces of replaced part including cleaning and preparing the surface including a coat of wood filler with one coat of french polish, complete all as specified, directed and shown on drawings: -

Front or back long rail required as per drg

Side rail (Left or Right) required as per drg

Leg for table dining 08 pers required as per drg

Stiffener (bottom support of table top) required as per drg

Wooden corner (cleat) required as per drg

Removing of old unserviceable/broken shoe from table dining 8 pers and S&F new hard PVC shoe of superior quality, fixed with screw, complete all as specified, directed and shown on drawings.

Removing of unserviceable/ broken top from table dining 8 pers and supply & fixing new top made of 17/18 mm thick prelaminated MDF board, exterior grade, ISI marked, duly fixed with 4 mm thick first class hard wood (Shisham wood) beading allround the top, complete all as specified, directed and shown on drawings.

Applying french polishing including cleaning and preparing the surface with one or more coats to entire exposed wooden surfaces of repaired table dining 8 pers (new and old parts), complete all as specified and directed.

Table writing FD-33, 249, 275 Removing of old unserviceable following parts from table writing and supply & fixing new parts made of first class hard wood (Shisham wood) duly finished with existing shape and fixed with bamboo pin and fevicol including tightening of other joints, and applying french polishing on all exposed wooden surfaces of replaced part including cleaning and preparing the surface including a coat of wood filler with one coat of french polish, complete all as specified, directed and shown on drawings: -

Leg (Left / right side) required as per drg

Long rail required as per drg

Short rail required as per drg

Side stiffener required as per drg

Centre stiffener required as per drg

Replacement ply 6 mm thick commercial for box of the table writing required as per drg .

Replacement of left/ right side of box of table made of 17/18 mm thick prelaminated MDF board, both side natural Shisham shade including 4 mm thick Shisham wood beading, complete all as specified, directed and shown on drawings.

Replacement of shutter of table writing using 17/18 mm thck prelaminated MDF board, exterior grade ISI marked both side laminated including 4mm Shisham wood beading required as per drg including continuous piano hinge, knob and 4 lever brass mortice lock.

Replacement of drawers of box of table writing required as per drg (MDF board, 6mm thick commercial plywood) including 4mm Shisham wood beading, aluminum anodised knob.

Removing of old unserviceable/broken shoe from table writing and S&F new hard PVC shoe of superior quality, fixed with screw, complete all as specified, directed and shown on drawings.

Removing of unserviceable/ broken top from table writing and supply & fixing new top made of 17/18 mm thick prelaminated MDF board, exterior grade, ISI marked, duly fixed with 4 mm thick first class hard wood (Shisham wood) beading allround the top, complete all as specified, directed and shown on drawings.

Applying french polishing including cleaning and preparing the surface with one or more coats to entire exposed wooden surfaces of repaired table writing (new and old parts), complete all as specified and directed.

Side board FD-26, 241, 371

Removing of old unserviceable broken shutter from side board and supply and fix new shutter made of 17/18 mm thick prelaminated MDF board including 4 mm thick first class hard wood Shisham wood beading alround the shutter and fixing in position with MS piano hinges of suitable flap width and providing one No. anodised aluminium knob, complete all as specified, directed and shown on drawings. Note :- Each shutter will be measured as single unit.

Removing of old unserviceable Left or right side and S&F new Left or right side made of prelaminated MDF board 17/18 mm thick, exterior grade, ISI marked, both side laminated and fixing in position, complete all as specified, directed and shown on drawings.

Removing of old unserviceable bottom of side board and S&F new prelaminated MDF board 17/18 mm thick exterior grade, ISI marked, both side laminated and fixing in position, complete all as specified, directed and shown on drawings.

Removing of old unserviceable shelf of side board and S&F new prelaminated MDF board 17/18 mm thick exterior grade, ISI marked, both side laminated and fixing in position, complete all as specified, directed and shown on drawings.

Removing old unserviceable back ply from side board S&F back ply of 6mm thick both side commercial, ISI marked and fixing in position, complete all as specified, directed and shown on drawings.

Removing old unserviceable leg and batten of side board S&F New leg and batten of 1st class Hardwood (Shisham wood) and fixing in position with screw / Nails all as showsn on drg and a directed.

Removing old unserviceable / broken knob from side board and S&F New aluminium anodised knob of 38 to 40mm dia and fixed with machine made screws, complete all as specified, directed and shown on drawings.

Removing old unserviceable drawer from side board and S&F New drawer including aluminum anodised knob in position, complete all as specified, directed and shown on drawings.

Removing of unserviceable/broken top from side board and supply & fixing new top made of 17/18 mm thick prelaminated MDF board, exterior grade, ISI marked duly fixed with 4 mm thick first class hard wood (Shisham wood) beading alround the top, complete all as specified, directed and shown on drawings.

Applying french polishing with high gloss including cleaning and preparing the surface with one or more coats to entire exposed wooden surfaces of repaired side board (new and old parts), complete all as specified and directed.

SOFA SET 4/ 5 PERSON WITH CUSHION FD-281, 373

Removing the existing unserviceable cushion of sofa set 4/5 seater and replacing with new foam cushion (40 Kg/Cum density) of size 560mm x 530mm x 100mm duly covered with new tapestry cloth including mulmul cloth and chain in one side, complete all as specified, directed and shown on drawings. Note :- The tapastry cloth shall not be less than Rs. 400/- per metre and of design/pattern as approved by the Engineer in Charge.

Removing the existing unserviceable front leg from Sofa set and providing new first class hard wood (Shisham) leg of size 70mm x 35 mm x 300mm, complete all as specified, directed and shown on drawings.

Removing the existing unserviceable rear leg from Sofa set and providing new first class hard wood (Shisham) leg of size 70mm x 35 mm x 300mm, complete all as specified, directed and shown on drawings.

Removing the existing unserviceable arm rest from Sofa sets and providing new first class hard wood (Shisham) arm rest of size 35mm x 70 mm x 725mm, complete all as specified, directed and shown on drawings.

Removing the existing unserviceable side rail from Sofa and providing new first class hard wood (Shisham) side rail of size 35mm x 100 mm x 725mm, complete all as specified, directed and shown on drawings.

Removing the existing unserviceable bearer from Sofa set and providing new first class hard wood (Shisham) bearer of size 40mm x 40 mm (length as per drg), complete all as specified, directed and shown on drawings.

Removing the existing unserviceable batten from Sofa set and providing new first class hard wood (Shisham) batten of size 50mm x 20 mm (length as per drg), complete all as specified, directed and shown on drawings.

Removing the existing unserviceable front rail from Sofa 3 seater and providing new first class hard wood (Shisham) front rail of size 35mmx100mmx1590mm, complete all as specified, directed and shown on drawings.

Removing the existing unserviceable front rail from Sofa single seater and providing new first class hard wood (Shisham) front rail of size 35mm x 100mm x 530mm, complete all as specified, directed and shown on drawings.

Removing the existing unserviceable support of back frame from Sofa 3 seater and providing new first class hard wood (Shisham) back frame of size 35mm x 70mm x 1590mm, complete all as specified, directed and shown on drawings.

Removing the existing unserviceable support of back frame from Sofa single seater and providing new first class hard wood (Shisham) back frame of size 35mm x 70mm x 530mm, complete all as specified, directed and shown on drawings.

S&F in replacement PVC shoes of superior quality, 25mmx25mm dia, fixed with 30mm long screws, complete all as specified, directed and shown on drawings.

BED HARD/ BED PLY TOP (1980mmx900mmx660mm) FD-246/ 247 Removing of old unserviceable following parts from bed hard/bed ply top and supply & fixing new parts made of first class hard wood (Shisham wood) duly finished with existing shape and fixed with bamboo pin and fevicol including tightening of other joints, and applying french polishing on all exposed wooden surfaces of replaced part including cleaning and preparing the surface including a coat of wood filler with one coat of french polish, complete all as specified, directed and shown on drawings: -

Long rail, 35x90 mm in section and length as per existing size of bed.

Short rail, 35x90 mm in section and length as per existing size of bed.

Complete head board including legs as per Drg

Complete foot board including legs as per Drg

Stiffener, 40x60 mm in section and length as per existing size of bed

S&F in renewal of 4 mm thick one side Shisham face and other side commercial face of size 780mm x 340mm plywood of head board including 12 mm dia half cut Shisham wood beading, provided alround on both sides of head board, complete all as specified, directed and shown on drawings.

S&F in renewal of 4 mm thick both side Shisham face of size 780mm x 180mm plywood of foot board including 12 mm dia half cut Shisham wood beading, provided alround on both sides of foot board, complete all as specified, directed and shown on drawings.

S&F in renewal of flat iron of bed ply top, size 35mm x 5mm, bent to right angle and fixed on each corner of Bed Hard, complete all as specified, directed and shown on drawings. (Each flat iron support shall be measured and paid separately as one unit).

S&F 12mm thick plywood top of size 1800x900 mm, BWR Grade, approved quality in single piece without any joint to the bed frame with suitable screws wood/steel with cup washer including removal of damaged ply wood top, complete all as specified, directed and shown on drawings.

S&F 12mm thick plywood top of size 1920 to 1950 x900 mm, BWR Grade, approved quality in single piece without any joint to the bed frame with suitable screws wood/steel with cup washer including removal of damaged ply wood top, complete all as specified, directed and shown on drawings.

TABLE DRESSING GENTS FD-230

S & F in renewal of top or bottom of table dressing gents made out of 17/18 mm thick pre-laminated MDF board with both side decorative choice lamination including providing 4 mm thick shisham wood beading on front side, complete all as specified, directed and shown on drawings.

S & F in repairs new back of table dressing gents made out of 12 mm thick Ist class HW (Shisham) plank including key plate and applying french polishing on all exposed wooden surfaces including cleaning and preparing the surface including a coat of wood filler with one coat of french polish, complete all as specified, directed and shown on drawings.

S & F in repairs new drawer of table dressing gents as per drawing including one No. anodised aluminium knob and applying french polishing on all exposed wooden surfaces including cleaning and preparing the surface including a coat of wood filler with one coat of french polish, complete all as specified, directed and shown on drawings. Note:- Each drawer shall be measured as single unit.

Supply & fixing in repairs Knob of table dressing gents made of anodized aluminium and fixed with screw, complete all as specified, directed and shown on drawings.

S & F in repairs new mirror frame of table dressing gents made out of Ist class HW (Shisham) including key plate and applying french polishing on all exposed wooden surfaces including cleaning and preparing the surface including a coat of wood filler with one coat of french polish, complete all as specified, directed and shown on drawings.

Supply & fixing in repairs plywood back of mirror of table dressing gents, made out of 6 mm thick plywood, complete all as specified, directed and shown on drawings.

TABLE DRESSING LADIES FD-251

S & F in repairs new top or bottom of table dressing ladies made out of 17/18 mm thick pre-laminated MDF board with both side decorative choice lamination including providing 4 mm thick Shisham wood beading on front side, complete all as specified, directed and shown on drawings.

S & F in repairs new side (Left or right) of table dressing ladies made out of 17/18 mm thick prelaminated MDF board with both side decorative choice lamination including providing 4 mm thick Shisham wood beading on front side, complete all as specified, directed and shown on drawings.

S&F in repairs new back support made out of 12 mm thick plywood for box of Table dressing ladies, complete all as specified, directed and shown on drawings.

S&F in repairs base frame legs with batten of table dressing ladies made out of Ist class hard wood Shisham and applying french polishing on all exposed wooden surfaces of replaced part including cleaning and preparing the surface including a coat of wood filler with one coat of french polish, complete all as specified, directed and shown on drawings.

Removing the existing unserviceable aluminium channel from table dressing ladies and S&F new aluminium channel, fixed with screws, complete all as specified, directed and shown on drawings.

S & F in repairs new mirror frame of table dressing ladies made out of Ist class HW (Shisham) including key plate and 6 mm thick plywood mirror back and applying french polishing on all exposed wooden surfaces of replaced part including cleaning and preparing the surface including a coat of wood filler with one coat of french polish, complete all as specified, directed and shown on drawings.

S & F in repairs drawer of table dressing ladies made of 1st class shisham wood, 17/18mm thick prelaminated MDF board, exterior grade, ISI marked, both side laminated with 6mm thick plywood including 4mm thick shisham wood beading (as per drawing) including one No. anodised aluminium knob and applying french polishing on all exposed wooden surfaces of replaced part including cleaning and preparing the surface including a coat of wood filler with one coat of french polish, complete all as specified, directed and shown on drawings.

Supply & fixing in repairs Knob of table dressing ladies made of anodized aluminium and fixed with screw, complete all as specified, directed and shown on drawings.

ALMIRAH MESS UTENSILS FD-93 (M)

Removing of old unserviceable broken shutter from Almirah Mess Utensil and supply and fix new shutter made out of 17/18 mm thick prelaminated MDF board with both side decorative choice lamination including 4 mm thick first class hard Shisham wood beading alround the shutter and fixing in position with new bright finish MS piano hinges, complete all as specified, directed and shown on drawings.

Removing of old unserviceable broken shelf from Almirah Mess Utensil and supply and fix new shelf made out of 17/18 mm thick prelaminated MDF board including 4 mm thick first class hard Shisham wood beading on front side of the shelf, complete all as specified, directed and shown on drawings.

Supply & fixing in repairs plywood back of almirah mess utensils, made out of 6 mm thick plywood and fixed with headless nails, complete all as specified, directed and shown on drawings.

S&F in replacement side (left or right) of almirah mess utensils made out of 25 mm thick Ist class HW (Shisham) and fixed in existing position and applying french polishing on all exposed wooden surfaces of replaced part including cleaning and preparing the surface including a coat of wood filler with one coat of french polish, complete all as specified, directed and shown on drawings.

Removing old unserviceable bottom frame of Almirah mess utensil S&F New bottom frame made out of Ist class Hardwood (Shisham) and fixing in position with screws/Nails and applying french polishing on all exposed wooden surfaces including cleaning and preparing the surface including a coat of wood filler with one coat of french polish, complete all as specified, directed and shown on drawings.

BIN LINEN MULTIPURPOSE FD/E6/MAP/09

S & F in renewal of handle of bin linen multipurpose, superior quality and fixed in existing position, complete all as specified, directed and shown on drawings.

S & F in renewal of drawer of bin linen multipurpose made of 17/18mm thick prelaminated MDF board, exterior grade, ISI marked, both side laminated with including PVC beading of superior quality (as per drawing) complete all as specified, directed and shown on drawings.

S & F in renewal of top of bin linen multipurpose made of 17/18mm thick prelaminated MDF board, exterior grade, ISI marked, both side laminated with including PVC beading of superior quality (as per drawing) complete all as specified, directed and shown on drawings.

S & F in renewal of back side of bin linen multipurpose made of 17/18mm thick prelaminated MDF board, exterior grade, ISI marked, both side laminated with including PVC beading of superior quality (as per drawing) complete all as specified, directed and shown on drawings.

S & F in renewal of left/right side of bin linen multipurpose made of 17/18mm thick prelaminated MDF board, exterior grade, ISI marked, both side laminated with including PVC beading of superior quality (as per drawing) complete all as specified, directed and shown on drawings.

S & F in renewal of door of bin linen multipurpose made of 17/18mm thick prelaminated MDF board, exterior grade, ISI marked, both side laminated, including 'D' type handle with & including PVC beading of superior quality (as per drawing) complete all as specified, directed and shown on drawings.

S & F in renewal of bottom base of bin linen multipurpose made of 17/18mm thick prelaminated MDF board, exterior grade, ISI marked, both side laminated, including 'D' type handle with & including PVC beading of superior quality (as per drawing) complete all as specified, directed and shown on drawings.

S&F in renewal of PVC beading of Bin Linen Multipurpose, superior quality, complete all as specified, directed and shown on drawings.

Board Notice 2440mm x 1220mm, FD-99(M)

S&F in renewal of 4mm thick glass of Board Notice 2440mm x 1220mm, shape and size all as shown on drawing, complete all as specified and dircted.

S&F in renewal of door frame of Board Notice 2440mm x 1220mm, with new door frame made of 1st class hard teak wood & including butt hinges & haps and stapple, shape and size all as shown on drawing, complete all as specified and dircted.

M&L for applying high gloss french polishing including cleaning and preparing the surface with one or more coats to entire exposed wooden surfaces, complete all as specified and directed.

Board Notice 1830mm x 1220mm, FD-99(M)

S&F in renewal of 4mm thick glass of Board Notice 1830mm x 1220mm, shape and size all as shown on drawing, complete all as specified and dircted.

S&F in renewal of door frame of Board Notice 1830mm x 1220mm, with new door frame made of 1st class hard teak wood & including butt hinges & haps and stapple, shape and size all as shown on drawing, complete all as specified and dircted.

M&L for applying high gloss french polishing including cleaning and preparing the surface with one or more coats to entire exposed wooden surfaces, complete all as specified and directed.

Hat Stand with Mirror (Drg No.FD-206, 233, 362)

S & F in replacement 5 mm thick mirror of Hat stand in proper size, complete all as shown on drawings, specified and directed.

S & F in replacement teak ply of Hat stand with mirror, 4mm thick with teak face veneers, in proper size, complete all as shown on drawings, specified and directed.

S & F in replacement edges of Hat stand with mirror, made of 6mm x 35 mm thick first class teak wood beading, complete all as shown on drawing, specified and directed.

S & F in replacement back ply of Hat stand with mirror made of 6mm thick commercial type BWR grade plywood, complete all as shown on drawings, specified and directed.

S & F in replacement peg of Hat stand with mirror, made of brass, bright finish, best quality, shape and size all as shown on drg, complete all as specified and directed.

M&L for applying high gloss french polishing including cleaning and preparing the surface with one or more coats to entire exposed wooden surfaces (new and old parts), complete all as specified and directed..

M&L preparation of old wooden surfaces by scraping and filling bore holes with putty and finally rubbing with sand paper/abrasive cloth throughly for smooth and clean surface and applying one coat of French polish and over it applying a coat of Touchwood glossy polish, complete all as specified and directed for the following furniture articles: -

Bed plywood top/ Hard wood FD - 246

Sofa Set 5 Seater FD-281

Sofa Set 4 Seater FD-281

Table Dressing Gents FD-230

Table Dressing Ladies FD-251

Almirah mess utencils FD-93(M)

M&L for preparation of old previously treated exposed (Inside and outside) wooden surfaces by scraping and filling bore holes with putty and finally rubbing with sand paper/abrasive cloth thoroughly for smooth and clean surface and applying one or more coats of french polish and over it and applying a coat of clear glossy wood finish (Touchwood), complete all as specified and as directed for the following wooden furniture articles: -

Bed plywood top FD-246 & 247

Chair dining FD-16 (M), 203, 262, 270 & 279

Chair Easy FD-17 (M), 201 & 229

Chair Writing FD-20, 247, 250 & 280

Chair dining (PVC sheet) FD/MAP-II/05

Hat Stand with mirror FD-206, 233, 361 & 362

Sofa Set 5 Seater FD-281

Sofa Set 4 Seater FD-281

Side Board FD-26, 241 & 371

Table Peg FD-25 (M), 236, 277 & 384

Table Dressing gents with mirror FD-31(M) & 230

Table Dressing Ladies with Mirror FD-32 & 251

Table bed side wooden FD-210, 248 & 276

Teapoy FD- 34, 232, 278 & 382

Table centre/ Table centre 2 Tier FD-29(M), 235 & 274

Table 3' x 2' with or without drawer FD-42, 55, 224, 233, 283 & 284

Table dining 6 Pers FD-30(M), 239 & 273

Table dining 8 Pers FD-30(M), 239 & 273

Table dining 1200x 900 mm, 4 Pers FD- 273 & FD/MAP-II/03

Table Writing FD-33, 249, 275

Table clerk wooden Drg No. DB-4120

Rack Laundry FD-85

Table Laundry FD-85(M)

Trestle Store Room FD-86

M/S CHANDER SHEKHAR

SNEH CORPORATION

B.S Constructions

SK INDUSTRIES

L.BHIMSEN

PRAFUL ENTERPRISES

Budget Furniture Industries