Construction of Chilarai Bhawan with Boundary wall at Bhuyankhat

Amount

(A) Construction of Chilarai Bhawan (RCC Building (G+2) provision) (For Ground Floor & First Floor): Ground Floor: Earth work in excavation for foundation trenches of walls, retaining walls, footing of colums, steps septic tank etc. (A) Up to a depth of 2.0 m below the existing G.L (a) In Ordinary Soil.

Providing soiling in foundation and under floor with stone/best quality picked jhama bricks, sand packed etc. etc. (a) Brick on flat soiling.

Plain cement concrete work with coarse agg. of size 13mm to 32mm in foundation bed for flooring step wall etc. etc. (a) In prop 1:3:6

Supplying, fitting and fixing in position reinforcement bars conforming to relevent I.S. Code etc. (From primary Producer: TATA/SAIL/Jindal Steel/Shyam Steel/RINL (ii) Super ductile (SD) TMT reinforcement bars.

Providing form work of 12mm thick plywood board so as to give a rough finish including centering, shuttering, etc. 3.2.1.1. Colums, pillars, posts & strut of square/rectangular etc.

Providing form work of 12mm thick plywood board so as to give a rough finish including centering, shuttering, etc. 3.2.1.2. Sides of soffits of beam, beam haunching, cantilever lintel etc. (a) For depth not exceeding 1.0M

Providing form work of 12mm thick plywood board so as to give a rough finish including centering, shuttering, etc. 3.2.1.3. Flat surfaces such as soffits of suspended floor, roof, shajja, slab etc. (a) Floors etc. upto 200mm in thickness.

Providing & laying plain/reinforced cement concrete work with coarse sand & 20mm down graded stone etc. (i) Using Mixer Machine (a) In Sub-Structure up to plinth level, foundation, footing, column, with base tie and plinth beam etc. N) Without using admixture, plasticiser B) M-15grade concrete or prop 1:1.5:3

Providing & laying plain/reinforced cement concrete work with coarse sand & 20mm down graded stone etc. (i) Using Mixer Machine (a) In Sub-Structure up to plinth level upto 1st floor level. (ii) Columns, pillars, post, strut, suspended floor, rood etc. N) Without using admixture, plasticiser A) M-20 or in prop 1:1.5:3

Brick work in cement morter with 1st class brick including racking out joints and dewatering etc. (I) In Sub-Structure upto plinth level. (b) In prop 1:4

Earth/ sand filling in plinth in layers not more than 150mm thick including necessary carriage, watering, ramming, etc. (A) With silt (Predominantly non plastic) by truck curing including loading and unloading.

Providing and laying 25mm thick damp roof course with cement concrete in prop. 1:1.5:3 etc.

1st class brick nogged wall in cement morter in racking out joints and curing complete above PL to 1st floor lvel. (A) 112mm thick brick wall. (a) In prop 1:4

Providing fitting and fixing powder coated pressed door frame made of 1.25mm/1.6mm thick sheet of various size etc. (a) 1.25mm thick sheet (ii) Size 125mm x 60mm (Single rebate)

Providing, fitting and fixing anodised aluminium windows and ventilators of standard sections of approved brand (Hindal CO/NALCO/BALCO/JINDAL/Other equivalent primary producer etc. (A) Side hung and Top hung windows and ventilators (I) 6mm clear glass

Providing, fitting and fixing M.S. grill of required for windows/clerestory window opening with M.S. flats at required spacing in frame all round, square or or round headed bolts and nuts or screws. (c) Fixed to Brick work/PCC/RCC

15mm thick cement plaster in single coat on single or half brick walls for interior plastering upto 1st floor level etc. A) On rough side (b) In prop 1:4

15mm thick cement plaster in single coat on single or half brick walls for interior plastering upto 1st floor level etc. B) On fair side (b) In prop 1:4

Cement plaster skirting with cement mortar in prop. 1:3 finished with a floating coat of neat cement etc. (a) 15mm thick.

65mm thick cement concrete floor consisting of 50mm under layer of cement concrete in prop 1:3:6 and 15mm thick wearing layer in cement concrete in prop 1:1:2 etc.

Providing ANTISKID tiles of approved quality size, shape and thickness not less than 8mm on floor skriting etc. (A) CERAMIC (iii) Executive range-2 (Sizes 600mmx600mm and above) Somany made-VC shield (Group-25) (605x605) a) Deluxe-VC.

Providing ceramic Tiles of approved quality, size, shape and thickness not less than 8 mm on floor skriting etc. (b) Executive range (Somany/Orient/Nitco/Asian make) (ii) Of size 250mm x 350mm and above).

Providing and fixing flush door shutter solid core construction with frame of 1st class hard wood with cross band etc. (a) Decorative type face panel and block board core. (i) 40mm thick.

Providing and fixing clear sheet glass beded in putty and fixed with/without wooden biddings etc. (i) Area of glass panes not existing 0.15 © 3.00mm thick

Supplying, fitting and fixing anodised aluminium fittings of approved make, seasonably smooth, free from sharp edges and corners, with counter sunk holes for screws etc. a) Sliding door bolt (i) 300mm x 16mm……….

Supplying, fitting and fixing anodised aluminium fittings of approved make, seasonably smooth, free from sharp edges and corners, with counter sunk holes for screws etc. b) Tower bolts (i) 250mm x 12mm……….

Supplying, fitting and fixing anodised aluminium fittings of approved make, seasonably smooth, free from sharp edges and corners, with counter sunk holes for screws etc. c) Door handles (iii) 150mm

Applying primary coat over new wood and wood based Surface over 100mm in grith/width after and incl. preparing the surface etc. (b) With ready mixed paint, wood primer (Pink)

Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint etc. a) General purpose (Asian paint/Nerolac paint/ J & N paint)

Applying primary coat over new Mattel and Mattel based Surface over 100mm in grith/width after and incl. preparing the surface etc. (b) With ready mixed paint, wood primer (Pink)

Painting two coats (excluding priming coat) on new matel and metal based surface with enamel paint etc. a) General purpose (Asian paint/Nerolac paint/ J & N paint)

Wall Painting (two coats) with plastic emulsion paint of approved brand and manufacture (Asian/paint/Berger paint/ICI paint/J & N /Nerolac) on new surface to give an even shade etc. (a) Plastic Emulsion Paint of approved brand and manufacture (Asian paint/Berger paint/ICI paint/J & N paint/Nerolac)

Finishing old/new wall with water proofing weather coat smooth anti-fungal exterior painting of Apex brand of Asian paints of required shade etc.

Pre construction anti-termite treatment with Aqueous emulsion having concentration 1:19 with Chloropirophose solution and water etc.

Providing of 40 user septic Tank including C.C work Brick work, plastering etc. complete.

Frist Floor: Supplying, fitting and fixing in position reinforcement bars conforming to relevent I.S. Code etc. (From Primary Producer: TATA/SAIl/Jindal steel/Shyam Steel/RINL (ii) Super ductile (SD) TMT reinforcement bars.

Extra over item 18.1.1 (a,b,c) for each subsequent floor or part thereof above first floor level

Providing form work of 2mm thick plywood board so as to give a rough finish including centering, shuttering, etc. 3.2.1.1 Columns, Pillars, Posts & Strut of square/ rectangular/etc.

Providing form work of 2mm thick plywood board so as to give a rough finish including centering, shuttering, etc. Extra for each subsequent floor or part thereof above first floor level as mentioned in item no.3.2.1 & 3.2.3(b) Same quantity as item No.22/3.2.1 (3.2.1.1)

Providing form work of 2mm thick plywood board so as to give a rough finish including centering, shuttering, etc. Extra for each subsequent floor or part thereof above first floor level as mentioned in item no.3.2.1 & 3.2.3(b) 3.2.1.2 Sides and Soffits of Beams, beam haunchings, cantilever lintel etc. (a) For depth not exceeding 1.0M.

Providing form work of 2mm thick plywood board so as to give a rough finish including centering, shuttering, etc. Extra for each subsequent floor or part thereof above first floor level as mentioned in item no.3.2.1 & 3.2.3(b) Same quantity as item No.22/3.2.1 (3.2.1.1)

Providing form work of 2mm thick plywood board so as to give a rough finish including centering, shuttering, etc. 3.2.1.3 Flat surface such as soffits of suspended floor, roof, Shajja, slab, etc. Floor etc. up to 200mm thickness

Providing form work of 2mm thick plywood board so as to give a rough finish including centering, shuttering, etc. 3.2.4 Extra for each subsequent floor or part thereof above first floor level as mentioned in item no.3.2.1 & 3.2.3 (b) Same quantity as item no.22/3.2.1. (3.2.1.3)

Providing and laying plain/reinforced cement concrete work with coarse sand & 20mm down graded stone etc. (I) Using Mixer Machine (B) In Sub-Structure from plinth level up to 1st floor level. (ii) Colums, pillars, posts, strut, suspended floor, roof etc. N) Without admixture, plasticiser. b) M20 or in prop 1:1.5:3

Extra over item Nos.2.2.1 (B) above for each subsequent floor or part thereof above the first floor level Same Quantity as item No.22/2.2.1 (B)

112mm thick 1st class brick nogged wall in cement morter in racking out joints and curing complete above PL up to 1st floor level. (A) 112mm thick brick wall (b) In Prop 1:4

Extra for brick walling for each subsequent floor or part thereof above the first floor level. Same Quantity as item No.22/4.1.8

Providing fiting and fixing powder coated pressed door frame made of 1.25mm/1.6mm thick sheet of various size etc. (a) 1.25mm thick sheet (ii) Size 125mm x 60mm (Single rebate)

Providing, fitting and fixing anodised aluminium windows and ventilators of standard sections of approved brand (HINDALCO/NALCO/BALCO/JINDAL/Other equivalent primary producer etc. (A) Side hung and Top hung windows and ventilators (I) 6mm clear glass

Providing, fitting and fixing M.S. grill of required for windows/clerestory window opening with M.S. flats at required spacing in frame all round, square or or round handed bolts and nuts or screws. (C) Fixed to Brick work/PCC/RCC

15 mm thick Cement plaster in single coat on single or half brick walls for interior plastering up to 1st floor level etc. A) On rough side (b) In prop 1:4

Extra over item no 6.2.1 to 6.2.5 for plastering on celling and soffits of stairs up to 1st floor level (instead of plastering on walls) including curing complete. Same Quantity as item No.22/6.2.2(A)

Extra over item no 6.2.1 to 6.2.5 for plastering on celling and soffits of stairs up to 1st floor level (instead of plastering on walls) including curing complete. Same Quantity as item No.22/6.2.2(A) B) On fair side b) In prop 1:4

Extra over item no 6.2.1 to 6.2.3 for plastering on celling and soffits of stairs up to 1st floor level (instead of plastering on walls) including curing complete. Same Quantity as item No.22/6.2.2(A)

Cement plaster skirting with cement mortar in prop. 1:3 finished with a floating coat of neat cement etc. (a) 15 mm thick

Providing and fixing flush door shutter solid core construction with frame of 1st class hard wood with cross band etc. (a) Decorative type face panel and block board core. (i) 40mm thick.

Providing and fixing clear sheet glass beded in putty and fixed with/without wooden bedding etc. (i) Area of glass panes exceeding 0.15m2 (c) 3.00mm thick.

Supplying, fitting and fixing anodised aluminium fittings of approved make, reasonably smooth, free from sharp edges and corners, with counter sunk holes for screws etc. a) Sliding door bolts (i) 300mm x 16mm

Supplying, fitting and fixing anodised aluminium fittings of approved make, reasonably smooth, free from sharp edges and corners, with counter sunk holes for screws etc. b) Tower bolts (ii) 250mm x 12mm

Supplying, fitting and fixing anodised aluminium fittings of approved make, reasonably smooth, free from sharp edges and corners, with counter sunk holes for screws etc. c) Door handles (iii) 150mm

Applying primary coat over new wood and wood based surface over 100mm in girth/width after and including preparing the surface etc. (b) With ready mixed paint, wood primer (pink)

Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint etc. a). General purpose (Asian paint/Nerolac paint/ J & N paint). Same Quantity as item No.14/13.6.3

Applying primary coat over new mattel and mattel based surface over 100m in girth/width after and including preparing the surface etc. b). With ready mixed paint matel primer (pink)

Painting two coats (excluding priming coat) on new matel and matel based surface with enamel paint etc. a) General purpose (Asian paint/ Nerolac paint/J & N paint). Same Quantity as item No.16/13.7.2

Wall painting (two coats) with plastic emulsion paint approved brand and manufacture (Asian paint/Berger Paint/ ICI paint/J & N paint/Nerolac) on new surface to give an even shade etc. (a) Plastic emulsion paint of approved brand and manufacture (Asian paint/Berger Paint/ICI paint/J& N paint/Nerolac)

Finishing old/new wall with water proofing weather coat Smooth anti-fungal exterior painting of Apex brand of Asian paints of required shade etc.

Sanitary & Water Supply: Providing victreous China wash basin of size 630mm x 450mm of parry ware make with CI/MS brackets etc. 1.13.1) PEDESTAL BASIN (with pedestal) A) Parryware make (a) White (ix) Cardiff 580 x 450 (Cat. No.C0480/81, C0375) (white/coloured)

Providing fitting and fixing vitreous china back type lipped front urinal with standard flush pipe and CP brass spreader and brass uniosns, etc. complete. A) Parryware make a) White (iv) Flat Back (Cat. No.C0501/72)

Providing fitting and fixing white vitreous water closet squatting pan (Indian type pattern) of size 580 x 240mm with 100mm SCI 'P' or 'S' Trap of Parryware/Hindware etc. a) White

Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing wiyh clamps etc. (a) In exposed surfaces or in trenches. (ii) 110mm dia.

Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing wiyh clamps etc. (a) In exposed surfaces or in trenches. (iv) 75mm dia.

Supplying fitting and fixing 87.5 degree PVC bend of (supreme/prince) or other ISI approved including joining, fitting and fixing with clamps etc. (a) In exposed surfaces or in trenches. ii) 110mm dia.

Supplying fitting and fixing 87.5 degree PVC bend of (supreme/prince) or other ISI approved including joining, fitting and fixing with clamps etc. (a) In exposed surfaces or in trenches. iv) 75mm dia.

Supplying fitting and fixing PVC single tee with door of (Supreme/Prince) or other ISI approved including joining, fitting and fixing with etc. (b) Concealed by chiseling or breaking brick wall/CC/RCC and making good to the damages. (ii) 110mm dia.

Supplying fitting and fixing PVC reducer of (Supreme/Prince) or other ISI approved including Joining, fitting and fixing with clamps etc. A) exposed surfaces or trenches. Iv) 110mm x 75mm

Providing fitting and fixing 75mm dia PVC cowel of ISI make complete as directed and specified.

Construction of inspection pit inside measurement 450mm x450mm x450mm flush with 100mm diameter HCI/PVC pipes and cement concrete base in prop 1:3:6 over flat brick soling etc.

Construction of filter bed soak pit including earth work in exacavation of soil and then filling up of the trench with brick bats/Charcoal covered with earth over a layer of A.C.plain sheet etc.

Supplying fitting and fixing G.I. Pipes of following sizes with all necessary approved G.I. Fittings such as bend, tee, elbow, H.W clamps etc. complete at all levels including below GL as directed an specified. (B) Concealed by chiscelling or breaking brickwall/CC wall/RCC wall etc. b) 40mm dia-(Medium) (ii) Using other ISI marked approved brand.

Supplying fitting and fixing G.I. Pipes of following sizes with all necessary approved G.I. Fittings such as bend, tee, elbow, H.W clamps etc. complete at all levels including below GL as directed an specified. (B) Concealed by chiscelling or breaking brickwall/CC wall/RCC wall etc. d) 25mm dia-(Medium) (ii) Using other ISI marked approved brand.

Supplying fitting and fixing G.I. Pipes of following sizes with all necessary approved G.I. Fittings such as bend, tee, elbow, H.W clamps etc. complete at all levels including below GL as directed an specified. (B) Concealed by chiscelling or breaking brickwall/CC wall/RCC wall etc. f) 15mm dia-(Medium) (ii) Using other ISI marked approved brand.

Supplying fitting and fixing stop-cock of approved brand of size as mentioned below etc. I) Brass stop cock (heavy) of Sant make. (i) 15mm dia.

(B) Construction of RCC staging, sand filter with Reservior and deep tube well: Earth work in excavation for foundation in trenches of walls, retaining walls, footing of column, steps and septic tank etc. (A) Up to a depth of 2m below the existing G.L (a) In Ordinary Soil.

Providing soiling in foundation and under floor with stone/best quality jhama bricks, sand packed etc. (a) Brick flat soiling

Plain cement concrete work with coarse agg. Of size 13mm to 32mm in foundation bed for flooring step wall etc. a) In prop 1:3:6

Supplying, fitting and fixing in position reinforcement bars conforming to relevent I.S. Code etc. a) From Primary Producer: TATA/SAIL/JINDAL steel/Shyam Steel/RINL (ii) Super Ductile (SD) TMT reinforcement bars.

Supplying, fitting and fixing in position reinforcement bars conforming to relevent I.S. Code etc. c) ISI approved Mild steel reinforcement bar (M.S. Bar)

Providing form work of 12mm thick plywood board so as to give a rough finish including centering, shuttering, etc. 3.2.1.1. Colums, pillars, posts & strut of square/rectangular etc.

Providing form work of 12mm thick plywood board so as to give a rough finish including centering, shuttering, etc. 3.2.1.2. Sides of tie beam, plinth beam, grade beam etc.

Providing form work of 12mm thick plywood board so as to give a rough finish including centering, shuttering, etc. 3.2.1.3. Flat surface such as soffits of suspended floor, roof, chajjas, slab, etc. Floors etc. upto 200mm in thickness.

Providing and laying plain/reinforced cement concrete work with coarse sand & 20mm down graded stone etc. (I) Using Mixer Machine (A) In Sub-Structure up to plinth level foundation, footing, colums with base, tie & plinth beam etc. N) Without using admixture, plasticiser a) M-20 grade concrete or prop 1:1.5:3

Providing and laying plain/reinforced cement concrete work with coarse sand & 20mm down graded stone etc. (I) Using Mixer Machine (B) In Sub-Structure from plinth level up to 1st floor level. (ii) Columns, pillars, post struts, suspended floor etc. b) M-20 of prop.1:1.5:3

Brick work in cement morter with 1st class brick including racking out joints and dewatering etc. In Sub-Structure (b) In prop 1:4

Earth/Sand filling in plinth in layers not more than 150mm thick including necessary, carriage, watering, raming etc. (C) With Silt (predominently non plastic) by truck carriage including loading and unloading.

112mm thick 1st class brick nogged wall in cement morter in racking out joints and curing complete above PL up to 1st floor level. a) In prop 1:4

15mm thick cement plaster in single coat on rough side of brick/concrete walls for exerior plastering up to 1st floor level etc. B) Fair side (b) In prop 1:4

Providing fitting and fixing M.S grill of required for windows/clerestory window/opening with M.S flat at required spacing in frame all ground, squre or round handed bolts and nuts or screws. 1. Plain Grill (c) Fixed to Brick work/PCC/RCC.

65mm thick cement concrete floor consisting of 50mm under layer of cement concrete in prop 1:3:6 and 15mm thick wearing layer in cement concrete in prop 1:1:2 etc.

Finishing old/new wall with water proofing weather coat Smooth anti-fungal exterior painting of Apex brand of Asian paints and required shade etc.

Providing of Tube Well platform with brick work, CC work plastering etc.

Water supply fittings and tube well: Supplying fitting and fixing G.I. Pipes of following with all neccy ''R'' brand of similar approved etc. (II) Conceld by chiseling or breaking brick wall CC wall/RCC wall and making etc. b) 32mm dia (Medium) (i) Using TATA make.

Supplying fitting and fixing C.P. Bib cock 15mm dia of approved brand etc. (i) Essco make (Delux/Sumthing spl/Tropical) (i) Bib cock short body

Supplying fitting and fixing chrome plated (cp) Stop-cock of approved brand etc. (ii) Jaquare make (a) Continental/Clarion (iii) 2-Way bib cock

Supplying and fixing placing plastic cylindrical vertical cloused top (PCVC) tank of sintex/Polycon etc. I) 2000 Litre Capacity. A) Sintex make

Supplying fitting and fixing pipes with all necessary fitting in exposed or in trenches etc. (A) G.I pipes with G.I fittings a) TATA/SAIL (Medium) 40mm dia

Supplying fitting and fixing brass Tez filter 2.00m long.

Labour for sinking tube well with 40mm (internal) dia G.I. Pipes up to havings strata, having etc.

Supplying fitting and fixing Maya hand pump No.6 for 40mm dia Tube Well etc. (ii) Mayur Maya

Supplying fitting and fixing of Motor (Pump) including Extra fitting of all accessories pipes, sockets etc.

(C) Construction of Boundary wall with Iron gate: Boundary wall Earth work in excavation for foundation in trenches of walls, retaining walls, footing of column, steps and septic tank etc. (A) Up to a depth of 2m below the existing G.L (a) In Ordinary Soil.

Providing brick soiling in foundation and under floor with stone/best quality jhama brick, sent pack etc. (a) Brick flat soiling.

Plain cement concrete work with coarse agg. of size 13mm to 32mm in foundation bed for 32mm in foundation bed for 32 mm in foundation bed for footing, steps, wall, etc. (b) In prop: 1:4:8

Providing and laying 25mm thick damp proof coarse with cement concrete in prop 1:1.5:3 etc.

Supplying fitting & fixing in position reinforcement bars conforming to relevent I.S. Code etc. (a) From Primary Producer: TATA/Sail/Jindal etc. (ii) ISI approved super ductile (SD) TMT reinforcement bar.

Supplying fitting & fixing in position reinforcement bars conforming to relevent I.S. Code etc. (a) From Primary Producer: TATA/Sail/Jindal etc. c) ISI approved M.S Rod

Providing form work of 12mm thick plywood Board so as to give a rough finish including centering shuttering etc. 3.2.1.1 Columns, Pillars, Posts & Strut of square/ rectangular etc

Providing form work of 12mm thick plywood Board so as to give a rough finish including centering shuttering etc. 3.1.1.2. Sides of tie beams, plinth beam, grade beam etc.

Providing and laying plain/reinforced cement concrete work with coarse sand & 20mm down graded stone etc. (I) Using Mixer Machine (A) In Sub-Structure up to plinth level Foundation, footing, colums base tie & plinth beam etc. N. With out admixture, plasticiser (b) M20 Grade Concrete or prop 1:2:4

Providing and laying plain/reinforced cement concrete work with coarse sand & 20mm down graded stone etc. (I) Using Mixer Machine B) In Super structure from plinth level upto 1st floor level. ii) Column, Pillar, Posts, struts, suspended floor, rrof etc. N. With out admixture, plasticiser (b) M20 Grade Concrete or prop 1:2:4

Brick work in cement morter with 1st class brick including racking out joints and dewarting etc. (I) In sub structure up to plinth level. (C) In prop 1:5

112mm thick 1st class brick with 1st class brick including racking out joints and curing complete above P.L. Up to 1st floor level. (b) In Prop 1:5

15mm thick cement plaster in single coat on fair side of brick/concrete walls for interior plastering up to 1st floor level etc. A) On rough side B. In prop 1:4

(a) Applying one coat of cement primer of approved brand and manufacture on new wall surface after thoroughly brooming the surface etc.

(b) Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on new wall surface (two coats) to give an even shade etc.

Iron gate Earth work in excavation for foundation in trenches of walls, retaining walls, footing of column, steps and septic tank etc. (A) Up to a depth of 2m below the existing G.L (a) In Ordinary Soil.

Providing brick soiling in foundation and under floor with stone/best quality jhama brick, sent pack etc. (a) Brick flat soiling.

Plain cement concrete work with coarse agg. of size 13mm to 32mm in foundation bed for 32mm in foundation bed for 32 mm in foundation bed for footing, steps, wall, etc. (b) In prop: 1:4:8

Supplying fitting & fixing in position reinforcement bars conforming to relevent I.S. Code etc. (a) From Primary Producer: TATA/Sail/Jindal etc. (ii) ISI approved super ductile (SD) TMT reinforcement bar.

Supplying fitting & fixing in position reinforcement bars conforming to relevent I.S. Code etc. (a) From Primary Producer: TATA/Sail/Jindal etc. c) ISI approved M.S Rod

Providing form work of 12mm thick plywood Board so as to give a rough finish including centering shuttering etc. 3.2.1.1 Columns, Pillars, Posts & Strut of square/ rectangular etc

Providing form work of 12mm thick plywood Board so as to give a rough finish including centering shuttering etc. 3.1.1.2. Sides of tie beams, plinth beam, grade beam etc.

Providing and laying plain/reinforced cement concrete work with coarse sand & 20mm down graded stone etc. (I) Using Mixer Machine (A) In Sub-Structure up to plinth level Foundation, footing, colums base tie & plinth beam etc. N. With out admixture, plasticiser (b) M20 Grade Concrete or prop 1:2:4

Providing and laying plain/reinforced cement concrete work with coarse sand & 20mm down graded stone etc. (I) Using Mixer Machine B) In Super structure from plinth level upto 1st floor level. ii) Column, Pillar, Posts, struts, suspended floor, rrof etc. N. With out admixture, plasticiser (b) M20 Grade Concrete or prop 1:2:4

Brick work in cement morter with 1st class brick including racking out joints and dewarting etc. (I) In sub structure up to plinth level. (C) In prop 1:5

15mm thick cement plaster in single coat on fair side of brick/concrete walls for interior plastering up to 1st floor level etc. A) On rough side B. In prop 1:4

(a) Applying one coat of cement primer of approved brand and manufacture on new wall surface after thoroughly brooming the surface etc.

(b) Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on new wall surface (two coats) to give an even shade etc.

Providing fitting and fixing double leaf Iron Gate etc. complete.

Applying primary coat over new mattel based surface over 100m in girth/width after including preparing the surface etc. a) With ready mixed paint matel primer (pink)

Painting two coats (excluding priming coat) on new wood and matel based surface with enamel paint etc. (a) General purpose (Asian paint/Nerolac paint/J & N paint).

(D) Earth Filling (In campus): Raising low site around the building with approved soil obtained from outside by truck carriage including breaking clods, dressing etc. (Deduction 12.5% for shrinkage). (b) Other than Guwahati municipalty area.

(E) Electrification (External & Internal): Wiring for light/fan/call bell point with 2x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel/ or Equivalent Make as approved by the Deptt.) in surface/recessed conduit wiring system with 20mm dia 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including 6 Amp flush type switch/ bell push (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) GI/ MS switch board (ISI marked) with phenolic laminated sheet cover, ceiling rose (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) etc. complete 2.1 Short point up to 3.00 metre. length.

Wiring for light/fan/call bell point with 2x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel/ or Equivalent Make as approved by the Deptt.) in surface/recessed conduit wiring system with 20mm dia 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including 6 Amp flush type switch/ bell push (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) GI/ MS switch board (ISI marked) with phenolic laminated sheet cover, ceiling rose (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) etc. complete 2.2 Medium point up to 6.00 metre. length.

Wiring for light/fan/call bell point with 2x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel/ or Equivalent Make as approved by the Deptt.) in surface/recessed conduit wiring system with 20mm dia 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including 6 Amp flush type switch/ bell push (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) GI/ MS switch board (ISI marked) with phenolic laminated sheet cover, ceiling rose (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) etc. complete 2.3 Long point up to 10.00 metre. length.

Wiring to a 5 pin 6 Amps plug point with 1.5 sq. mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel or Equivalent Make as approved by the Deptt.) in surface/ recessed 2 mm thick/ heavy rigid ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system including 5 pin 6 Amps flush type plug socket and 6 Amps F/T switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.), GI/ MS switch board (I.S.I. mark with phenolic laminated sheet cover including earth continuity with 1.5 sq. mm. cable to third pin of the plug socket etc. as required complete, when placed elsewhere. 1.2.3 Long point up to 10.00 metre. length.

Wiring for 5/6 pin 16 Amps power plug point with 4 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system including and fixing 5/6 pin 16 Amps flush type socket outlets and 16 Amps flush type switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt./ Havells make), GI/ MS switch board (I.S.I. mark with phenolic laminated sheet cover earth continuity with 2.5 sq. mm cable to the 3rd pin 2.3.3 Long point up to 10.00 metre. length.

Wiring for 5/6 pin 16 Amps power plug point with 4 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system including and fixing 5/6 pin 16 Amps flush type socket outlets and 16 Amps flush type switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt./ Havells make), GI/ MS switch board (I.S.I. mark with phenolic laminated sheet cover earth continuity with 2.5 sq. mm cable to the 3rd pin of the socket as required complete with 20 mm. dia. 2mm thick/ heavy rigid ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) 2.4.1 Extra long point up to 15.00 metre. Length.

Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel or Equivalent Make as approved by the Deptt.) PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including earth continuity in surface/ recessed 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit wiring system. 2.7.1 With 2 x 2.5 sq. mm. + earth continuity with 1 x 1.5 sq. mm. in flat 19 mm ISI marked casing 'n' capping system.

Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel or Equivalent Make as approved by the Deptt.) PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including earth continuity in surface/ recessed 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit wiring system. 2.7.2 With 2 x 4 sq. mm. + earth continuity with 1 x 2.5 sq. mm. cable in flat 19 mm ISI marked casing 'n' capping system.

Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel or Equivalent Make as approved by the Deptt.) PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including earth continuity in surface/ recessed 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit wiring system. 2.8.3 With 2 x 6 sq. mm. + earth continuity with 1 x 4 sq. mm. cable in flat 25 mm ISI marked casing 'n' capping system.

2.8 Wiring for drawing sub-main line with PVC insulated single core unsheathed (Multistrand) cable FR conforming to IS-694:1990 with flexible bright..... 2.8.3 With 3 x 10 sq.mm. + earth continuity with 2 x 6 sq.mm. Cable in flat 25mm ISI marked casing 'n' capping system.

Supplying and fixing of switch/soxket flush type (Anchor Penta PC CHERRY /Gold medal /Kolor kany.kom/Havells or equivalent make as approved by the Deptt.) on the existing PVC/MS board including connection as approved by the Deptt. complete as required.

Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof (IP-43) double door surface mounting TPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. 15.8.1.1 4 way TPN (4+12) double door.

Supplying with fitting and fixing sheet steel, phosphatised, powder painted single door surface mounting MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. 15.5.1.4 12 way SPN single door

Supplying with fitting and fixing single pole 10 KA 240/415 V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 16.1.1.1 B Series. 6 to 32A

Supplying with fitting fixing TPN 10KA 240/415 V 50Hz of the following capacity complete making necessary connection as approved and specified by the deptt. 16.5.1.3 B Series 63A

Supplying with fitting and fixing SPN 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved specified and directed by the deptt. 16.2.1.3 B Series 63A

Supply installation & testing of G.I earth station with perforated 40mm dia and 4.50 mt. long heady duty G.I pipe with necessary 40 mm dia. G.I. Fitting such as Socket, Tee, elbow, nipple and 50mm x 40mm G.I. reducing socket for funnel including locking arrangement 300mm x 300mm x 6mm hinged cover C.I. earth plate complete with digging of earth pit, construction of brick chamber and plastering of both inner of outer surface of wall as specified and directed by the deptt.

Extra for using salt 5 Kg. and Charcoal 64 Kg. in pipe Earth Station pit to provide low impedance ground in location of high soil resistivity as and when required and specified by the Deptt.

Supplying & laying of 8 SWG Copper. Earth from Earth Electrode (below G.L) to electrical switch gear or electrical machineries including making necessary connection as approved specified and directed by the deptt.

Supplying and fixing of polished Brass Bracket of 18.S.W.G 25cm, long cast back plate and brass lamp holder complete including connection as approved by the deptt. As required (without lamp)

Supplying and fitting of 18/20 Watt CFL lamp in the existing batten holder/angle holder/decorative bracket/bulk head fitting/ pendent holder etc. as specified and directed by the deptt.

Supplying including fitting fixing of following A.C. Ceiling fan complete with all accessories like down rod, canopy etc. of following sweeps with making necessary connection as approved by the Deptt.) as required complete and as directed by the Department [Without regulator]. 27.1.6 Standard model 1200mm sweep (usha make) standard model 1050/1200 mm sweep (havells make) high speed 1200mm sweep (Orient Pspo make)

Supplying including fitting fixing of following A.C. Exhaust fan in the existing hole on the wall of following sweeps with making necessary connection as approved by the Deptt. as required complete and as directed by the Department. 27.2.1.1 Ventilator RX 150mm sweep (ORIENT make) Brisk Air 150mm sweep Louver type (Crompton make)

Supplying installation testing and commission of the following indoor Recessed Mounted LED Luminaries complete with all accessories such as driver etc. in the flase ceiling type Armstrong/Gypsum or similar ceiling mouting with necessary support and connection with 1.5 sq.mm. P.V.C insulated S.C. copper conducter as required and as directed by the department. N.2. Philips lighting luminaire Green Spot range Model BBS311 1xDLED-5000 WH/BBS312 1xDLED-5000 WH/BBS314 1xDLED-5000 WH or equivalent as approved by the Deptt.

1/NEW. Supplying including installation with required bracket connection cable, as approved by the Deptt. with 2x2.5 sqmm copper FR CABLE testing and commissioning of the following street light/FLOOD LIGHT on existing pole/Structure including lamp, driver, ballast as required complete as directed and specified by the deptt. Philips 35w Uniflood integral flood light with driver inside a PDC housing highly efficient reliable and sturdy Model BVP120 LED 35 CW FG S1 PSU GR or equivalent as approved by the Deptt.

12.2 Supplying fixing I.C.T.P and N link Main Switch with rewire able fuse of 500 Volt grade (HPL/GECO/ANCHOR or equivalent make) including drilling boards/iron frames and fixing with bolts and nuts connection as approved by the Deptt.complete as required. 12.2.4 100 Amps Capacity T.P.N

Supplying including fitting and fixing bus bar chamber (HPL/GECO/or equivalent make) with 4 strips bus bar of length 450/600/900/1000 mm made of aluminium alloy or wrough aluminium suitable for 300 amp capacity complete with all accessories including connection etc. as required complete.

Supply and laying of following size PVC/XLPE insulated and PVC sheathed 1.1 KV G Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip), extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908 (Part 1) 1988 armoured U.G. cable U.G. cable laid in ground/partially in air (as required for termination over ground including excavation of cable trench up to depth of 75cm, refilling, protective brick covering, Sand cushioning etc complete handling of surplus spoil, debris etc. to proper place as specified and directed by the deptt. (Nicco/Havells/RPG/CCI/Polycab/Gloster/Finolex make or equivalent). 32.1.3 3 & 1/2 Core A2XFY 32.1.4.3 10.00 Sq. mm.4 Core armoured U.G. cable.

Supply and laying of following size solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908 (Part 1) 1988 armoured U.G. cable U.G. cable laid in pucca flooring, road crossing, drain crossing as per site requirement and partially in air to connection as approved by the Depts the control switch, through medium duty G.I pipe (Tata/Nezone make or equivalent as approved by the Deptt) bend and socket including excavation and refilling the trench and making good damage done as specified and directed by the deptt. (Nicco/Havells/RPG/CCI/Polycab/Gloster/Finolex make or equivalent) 32.5.4.3 10.00 Sq.mm + 4 Core U.G. cable in 40mm dia medium duty G.I. pipe.

New 12 Supplying installation testing and Commission of the following LED lamp as directed. 12. New 15 Philips LED Tube Model Essential LED tube 1200mm 18W840 T8 AP 1/Essential LED tube 1200mm 18W865 T8 AP 1/Essential LED tube 1200mm 18W865 T8 I IN/Essential LED tube 1200mm 18W840 T8 AP 1 or equivalent as approved by the Deptt.

Payment to be made to APDCL for Load security

Payment to be made to APDCL for 3 phase electronic Energy Metre (as per APDCL L Norms)

Khanin Warie

Riju Narzary