Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.9 LAccepted-Finance R O WARD NO 5 BRIJ NAGAR TEHSIL DISTT HAMIRPUR HP | ₹4.9 L | L1 | Accepted-Finance Lowest |
| 2 | L2₹5.0 LRejected-Finance RAJINDER KUMAR | CENTRAL DELHI | DELHI | 110054 | ₹5.0 L | L2 | Rejected-Finance Other than Lowest |
| 3 | L3₹5.4 LRejected-Finance VILLAGE BANOUN PO KHALANOO TEHSIL KOTLI DISTT MAND HP | MANDI | HIMACHAL PRADESH | 175001 | ₹5.4 L | L3 | Rejected-Finance Other than Lowest |
| Sl No | Description | Qty | Unit | Rajinder Kumar L2 | Anupam Rana L3 | NISHAT KUMAR L1 |
|---|---|---|---|---|---|---|
| 1.00 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer in charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) | 4.5 | Cum | 2,200 ₹9,900 | 1,900 ₹8,550 | 1,750 ₹7,875 |
| 2.00 | Manufacturing and Fixing of Tee of MS Pipe (ISO:3183) of having wall thickness 4.80 mm of 250x250x250 mm diametre i/c cutting of pipe and following size including cutting, welding of MS pipe complete in all respect including all keads and lifts as per entire satisfaction of Engineer-in-Charge. | 2 | Nos | 4,050 ₹8,100 | 4,500 ₹9,000 | 4,000 ₹8,000 |
| 3.00 | Manufacturing and Fixing of Tee of Gl Pipe (ISO:1239) of having wall thickness 4.80 mm of 150x150x150 mm diametre i/c cutting of pipe and following size including cutting, welding of Gl pipe complete in all respect including all keads and lifts as per entire satisfaction of Engineer-in-Charge. | 1 | No | 2,750 ₹2,750 | 2,900 ₹2,900 | 2,500 ₹2,500 |
| 4.00 | Laying. jointing and testing of MS pipe conforming to ISO:3183-2007 of following mentoned grade, diameter and wall thickness in trenches having random lengths of 5-7 mtrs including cost of fabrication of minimum 3 cut bends o. required degree. The pipe shall have inside & out side Galvanisation at manufacturer work conforming to IS:2629-1985. The pipe shall be jointed with circumferencial butt welded joints by electric arc welding in requisite number of weld runs so as to achive the minimum effective thorat thickness and strength of weld conforming to IS: 816-1969 sepecification, by using welding electrodes of 2.50 mm to 6.30 mm of Advani Oerlikon (Ador)-CITOJET / Esab make, conforming to IS:814-1991, at site of work complete in all respects. Each butt welded joint shall be tested with dye-penetration test (with the kit consisting of 3 sprays of 250 ML each includes (a) Cleaner CL-96 (b) Penetrant PT-97 (c) Developer Div-98 of checkmate make) complete in all respects, including manual / mechanical handling of pipes in all leads and lifts to the entire satisfication of Engineer-in-charge. (The earth work in treches to be measured and paid for separately)MS Pipe 250 mm dia ISO:3183 (Grade L-290) 4.80 mm | 30 | Rmt. | 510 ₹15,300 | 550 ₹16,500 | 495 ₹14,850 |
| 4.01 | MS Pipe 200 mm dia ISO:3183 (Grade L-290) 1 4.80 mm | 175 | Rmt. | 405 ₹70,875 | 450 ₹78,750 | 392 ₹68,600 |
| 5.00 | Cutting of Gl Pipe of various dia with generator welding set including carriage at site of work complete in all respect in all leads and lifts.250mm and 200 mm dia | 6,342.5 | CM | 3 ₹19,027.50 | 3.5 ₹22,198.75 | 2.95 ₹18,710.38 |
| 6.00 | Welding of Gl pipe of various dia with Diesel Generator welding set at site of work according to site requirement in minimum three layers to make the joint leakproof according to relevant BIS standards/approved specifications and to the entire saitsfactioin of the Engineer-in-charge complete in all respect in all leads and lifts.250mm and 200 mm dia | 19,027.48 | CM | 6.25 ₹1.2 L | 7 ₹1.3 L | 6 ₹1.1 L |
| 7.00 | Providing and Fixing Cast Iron Sluice Valve of LEADER / KIRLOSKAR / KILBURN make BIS No. 14846 class PN 1.6 with flange Table - 17 including welding of flanges, Nuts & Bolts and Gasket etc. The sluice valve conforming to IS -780. The dia of valve as mentioned below complete in all leads and lifts and to the entire satisfaction of the Engineer - in - Charge.250mm diameter | 1 | No | 1,52,000 ₹1.5 L | 1,60,000 ₹1.6 L | 1,55,000 ₹1.6 L |
| 7.01 | 200mm diameter | 1 | No | 1,00,000 ₹1 L | 1,02,000 ₹1.0 L | 98,000 ₹98,000 |
| 8.00 | Providing and Supplying of MS Flanges conforming to IS: 6392 1971 of Table 17 diameter mentioned below as per direction and to the entire satifaction of the Engineer-in-Charge. | 1 | Pair | 3,200 ₹3,200 | 5,000 ₹5,000 | 3,000 ₹3,000 |
Tender Value
₹4.9 L
EMD Value
₹9,800
Closing Date
10 Sept 2025, 5:00 pmClosed
Executive Engineer
EE JSV Mandi
Laying Jointing and Testing of MSERW pipe 250mm dia 200mm dia near tarna old JSV Office building
2025_HPIPH_113966_1
7681-7780
Open Tender
Miscellaneous Works
90 days
Mandi
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
₹9,800
16 Feb 2026
5 Sept 2025
11 Sept 2025
5 Sept 2025
10 Sept 2025
5 Sept 2025
Amount
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer in charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)
Manufacturing and Fixing of Tee of MS Pipe (ISO:3183) of having wall thickness 4.80 mm of 250x250x250 mm diametre i/c cutting of pipe and following size including cutting, welding of MS pipe complete in all respect including all keads and lifts as per entire satisfaction of Engineer-in-Charge.
Manufacturing and Fixing of Tee of Gl Pipe (ISO:1239) of having wall thickness 4.80 mm of 150x150x150 mm diametre i/c cutting of pipe and following size including cutting, welding of Gl pipe complete in all respect including all keads and lifts as per entire satisfaction of Engineer-in-Charge.
Laying. jointing and testing of MS pipe conforming to ISO:3183-2007 of following mentoned grade, diameter and wall thickness in trenches having random lengths of 5-7 mtrs including cost of fabrication of minimum 3 cut bends o. required degree. The pipe shall have inside & out side Galvanisation at manufacturer work conforming to IS:2629-1985. The pipe shall be jointed with circumferencial butt welded joints by electric arc welding in requisite number of weld runs so as to achive the minimum effective thorat thickness and strength of weld conforming to IS: 816-1969 sepecification, by using welding electrodes of 2.50 mm to 6.30 mm of Advani Oerlikon (Ador)-CITOJET / Esab make, conforming to IS:814-1991, at site of work complete in all respects. Each butt welded joint shall be tested with dye-penetration test (with the kit consisting of 3 sprays of 250 ML each includes (a) Cleaner CL-96 (b) Penetrant PT-97 (c) Developer Div-98 of checkmate make) complete in all respects, including manual / mechanical handling of pipes in all leads and lifts to the entire satisfication of Engineer-in-charge. (The earth work in treches to be measured and paid for separately)MS Pipe 250 mm dia ISO:3183 (Grade L-290) 4.80 mm
MS Pipe 200 mm dia ISO:3183 (Grade L-290) 1 4.80 mm
Cutting of Gl Pipe of various dia with generator welding set including carriage at site of work complete in all respect in all leads and lifts.250mm and 200 mm dia
Welding of Gl pipe of various dia with Diesel Generator welding set at site of work according to site requirement in minimum three layers to make the joint leakproof according to relevant BIS standards/approved specifications and to the entire saitsfactioin of the Engineer-in-charge complete in all respect in all leads and lifts.250mm and 200 mm dia
Providing and Fixing Cast Iron Sluice Valve of LEADER / KIRLOSKAR / KILBURN make BIS No. 14846 class PN 1.6 with flange Table - 17 including welding of flanges, Nuts & Bolts and Gasket etc. The sluice valve conforming to IS -780. The dia of valve as mentioned below complete in all leads and lifts and to the entire satisfaction of the Engineer - in - Charge.250mm diameter
200mm diameter
Providing and Supplying of MS Flanges conforming to IS: 6392 1971 of Table 17 diameter mentioned below as per direction and to the entire satifaction of the Engineer-in-Charge.
Rajinder Kumar (BID ID -552848)
Anupam Rana (BID ID -553165)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
