PROVN OF GUARD ROOM WITH ALLIED INFRA FOR AMN PL

Amount

Surface excavation n exc 30 cm deep and averging 15 cm deep and getting out in hard/dense soil. Complete all as specified and directed by Engineer-In-Charge.

Excavation in trenches, n exc 1.5m wide and n exc 1.5m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes, etc n exc 10 sq m on plan and n exc 1.5m in depth and getting out in hard/dense soil. Complete all as specified and directed by Engineer-In-Charge.

Excavation in post holes (or similar holes)in hard/desnse soil each n exc 0.5 cum getting out returnning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm watering and removing surplus soil to a distance n exc 50m and making good surface. Complete all as specified and directed by Engineer-In-Charge.

Demolition of brick work/stone masonry of any type built in cement mortor in foul condition etc Complete all as specified and directed by Engineer-In-Charge.

Demolition of RCC of any descrition and in any position not other wise specially provided for complete all as specified and directed by Engineer in Charge (Note: Reinforcement cut as required to facilitate demolition)

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15cm thickness (below or above ground level) and removing unserviceable material, outside cantonement areaComplete all as specified and directed by Engineer-In-Charge.

Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water etc Complete all as specified and directed by Engineer-In-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding(but not backing), removing serviceable tiles to store and rubbish off the premisesComplete all as specified and directed by Engineer-In-Charge.

Dismantling of plain or corrugated steel sheeting any gauge, thikness including nainital or similar pattern roof covering Complete all as specified and directed by Engineer-In-Charge.

Taking down or up 15mm bore GI tubing including cleaning for refixing or removal to store/credit etcComplete all as specified and directed by Engineer-In-Charge.

Taking down or up 20mm bore GI tubing including cleaning for refixing or removal to store/credit etcComplete all as specified and directed by Engineer-In-Charge.

Taking down frames (without taking off shutters from frame) exc. 1.5 sqm but n.exc 4.00 Sqm each and refixing in the same opening. Complete all as specified and directed by Engineer-In-Charge.

M&L for PCC 1:3:6 type C-2(40mm graded agg) as in foundation filling and mass concrete. Complete all as specified and directed by Engineer-In-Charge.

M&L for PCC 1:4:8 type D-2 (40mm graded agg) as in foundation filling and mass concrete Complete all as specified and directed by Engineer-In-Charge.

M&L for cement concrete type B-1 1:2:4 (20mm graded aggregrate) as in coping and the like including weathering slightly rounded/chamfered angle with and including necessary use and waste of formwork for fair faces of concrete Complete all as specified and directed by Engineer-In-Charge.

M&L for reinforced cement concrete (design mix) M-25 (20mm graded aggregates) as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns etc, basement slabs, under-reamed piles and mass concrete. Complete all as specified and directed by Engineer-In-Charge.

M&L for reinforced cement concrete (design mix) M--25 (20mm graded aggregates) as in column, pillars, piers, post and struts. Complete all as specified and directed by Engineer-In-Charge.

M&L for reinforced cement concrete (design mix) M-25 (20mm graded aggregates) as in beams, cantilevers, bressummers, lintels. Complete all as specified and directed by Engineer-In-Charge.

M&L for RCC nominal mix type B-1, 1:2:4 (20 mm graded aggregate ) as in slab supported on walls, beams and columns in floors, roof, landings, balconies, canopies, deck slabs and in shelves and like etc. Complete all as specified and directed by Engineer-In-Charge.

M&L for pre cast cement concrete cover slab Type B1 (1:2:4) (20 mm graded aggregate ) insert in CM 1:4 for man holes cover slab. Complete all as specified and directed by Engineer-In-Charge.

M&L for 75mm thick PCC type C-2 1:3:6 40 mm graded aggregrate as in plinth protection to be cast in panels 1.50 Sqm each panel in an outward slope of 1 in 10 with 6mm wide joints filled with bitumen mastic filing. Complete all as specified and directed by Engineer-In-Charge.

M&L for cement concrete type B2 1:2:4(20mm graded aggregate) as in surface channel and drains. Complete all as specified and directed by Engineer-In-Charge.

M&L for extra for forming fair finished drain or channel 30 to 90 cm inner grith in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc

M&L for mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking bending, binding spirally hooping for columns, hooking ends, binding with with mild steel wire (annealed) not less than 0.9mm dia of securing. Complete all as specified and directed by Engineer-In-Charge.

Mild steel TMT bars 6mm to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire(annealed) not less than 0.90mm dia or securing with clips. Complete all as specified and directed by Engineer-In-Charge.

S&F mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders. Complete all as specified and directed by Engineer-In-Charge.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits(if any) of foundation and plinth beams, and similar work ; vertical or to batter to rough finished surface of concrete, Complete all as specified and directed by Engineer-In-Charge.

Formwork to rough finished surfaces of concrete for flat to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc also splays between floor and beams etc. Complete all as specified and directed by Engineer-In-Charge.

Formwork to sides of pillars, posts, struts, piers, columns,slabs supportted on walls, and stanchions for rough finished surfaces of concrete surface square or rectangular or polygonal, complete all as specified and directed

M&L for brickwork with subclass "B" bricks straight or curved on plan exc. 6m mean radius in cement mortar (1:6) Complete all as specified and directed by Engineer-In-Charge.

Brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:6 Complete all as specified and directed by Engineer-In-Charge.

M&L for brick work built in cement and sand mortar 1:4with sub class 'B' old size bricks straight or curved on plan exceeding 6m means radius but except bricks only cComplete all as specified and directed by Engineer-In-Charge.

M&L for brickwork with subclass "B" bricks in one brick thick honey comb wall built in CM 1:4 Complete all as specified and directed by Engineer-In-Charge.

M&L for walling of randon rubble uncoarsed well bonded bedded solidly hearted built in CM 1:4 Complete all as specified and directed by Engineer-In-Charge.

Returning filliing in in layers n exc 25 cm thick including spreading, levelling, watering and well ramming Complete all as specified and directed by Engineer-In-Charge.

Removing surplus soil exc 50m and not exc 100m and depositing where directed at a level n exc 1.5m above the starting point Complete all as specified and directed by Engineer-In-Charge.

M&L for Soil obtained from excavation filling under floors or in foundations including watering and consolidation except soil Complete all as specified and directed by Engineer-In-Charge.

M&L hardcore of gauge n exc .63mm, deposited, spread and levelled in ayers n exc 15cm thick, watered and rammed to a true surface with broken stone or boulders Complete all as specified and directed by Engineer-In-Charge.

M&L for moorum filling under floors or in foundations including watering and consolidation Complete all as specified and directed by Engineer-In-Charge.

M&L for 75mm thick cement concrete type D-2, 1:4:8 (40mm graded aggregate as in sub floors, sub bases, floor and paving etc Complete all as specified and directed by Engineer-In-Charge.

M&L 25mm thick cement concrete type B-1, 1:2:4(20mm graded aggregate) as in sub floors, sub bases, floor and paving etc Complete all as specified and directed by Engineer-In-Charge.

M&L for non skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and including screed bed or bedding layer of 15mm thick in CM 1:6 for laying floor finishesComplete all as specified and directed by Engineer-In-Charge.

M&L for non skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and including screed bed or bedding layer of mortar 15mm thick inCM 1:6 for laying floor finishes Complete all as specified and directed by Engineer-In-Charge.

M&L for glazed ceramic tiles coloured tiles in vertical surfaces 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match and including 10mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4 Complete all as specified and directed by Engineer-In-Charge.

M&L for rendering 10mm thick IN CM 1:6 on fair faces of brick work or concrete surface and finished even and smooth (without using extra cement) Complete all as specified and directed by Engineer-In-Charge.

M&L Rendering 15mm thick in cement and sand mortar 1:4 on fair faces of brick work or cement concrete surfaces with using integral waterproofing compound(measured and paid seprately) including finishing the surface even and smooth using extra cement complete all as specified Complete all as specified and directed by Engineer-In-Charge.

M&L for preparing new surfaces plastered of walls and applying two coat of cement base paint Complete all as specified and directed by Engineer-In-Charge.

M&L for preparing new surfaces plastered of walls and applying two coat of oil bound distermper over suitable primer Complete all as specified and directed by Engineer-In-Charge.

S&F for rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc of Fe 410 W (Gde E-250) quality A Complete all as specified and directed by Engineer-In-Charge.

S&F for rolled mild steel in plates (plain or chequred) channels, square or cut or notched (ordinary or counter sunk) forming of Fe 410W (Gde E-250 quality A) Complete all as specified and directed by Engineer-In-Charge.

S&F MS bolts of dia exc 16 to 20mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut exc 22.5cm and n exc 30cm long Complete all as specified and directed by Engineer-In-Charge.

S&F framed work such as grills, gratings etc with ends of bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railing, water tank stagging and similar works, as directed by the Engr-in-Charge.

Preparation of new or previously untreated steel surfaces of any description, not otherwise described, over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer Complete all as specified and directed by Engineer-In-Charge.

M&L pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of green colour having tensile strengh of 550 Mpa as in roof covering/cladding to wall, fixed with J type or cranked hook bolts in lieu of self tapping screws as specified Complete all as specified and directed by Engineer-In-Charge.

M&L for pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of green colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with J type or cranked hook bolts in lieu of self tapping screws as specified Complete all as specified and directed by Engineer-In-Charge.

S&F with second class soft wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered, put together with glue pinned at joints all as specified and directed Complete all as specified and directed by Engineer-In-Charge.

S&F 35 mm thick factory made plain framed panelled shutter (two pannel) with lock rail and panel of 9 mm B.W.P. comercial ply or 12 mm veneered particle board with commercial veneeing on both faces. The size of rail and stile as per IS:1003 (Part I), kiln seasoned and chemically pressure treated Complete all as specified and directed by Engineer-In-Charge.

S&F 30mm thick Glazed and skelton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or founded, fitted with cut mitred beads for securing glass, etc, sizes of members of shutters as specified in SSR Part-I, Section 8, Clause 8.24 (a), supplied and fitted to chowkats Complete all as specified and directed by Engineer-In-Charge.

S&F MS bands, staps,hold fasts etc and similar small article confirming to Fe-290 Gde E-165 Complete all as specified and directed by Engineer-In-Charge.

S&F Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplied and fitted in openings as per specification and drawing shown in SSR Part-II, complete all as specified

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as shown in drawing of relevant item in MES, schedule Part-II , 2010 Complete all as specified and directed by Engineer-In-Charge.

S&F Sheet glass 4 mm thick, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each panel Complete all as specified and directed by Engineer-In-Charge.

M&L for preparation of new or previoulsy untreated wood surface of any description, over 10 cm width or girth, not other wise described and applying two coats of synthetic enamel paint over a coat of pink primer Complete all as specified and directed by Engineer-In-Charge.

S&F MS Butt hinges 100 mm long medium weight cold rolled Complete all as specified and directed by Engineer-In-Charge.

S&F MS Butt hinges 75 mm long medium weight cold rolled Complete all as specified and directed by Engineer-In-Charge.

S&F 150 mm long MS pressed handles, oval type stove anamelled black Complete all as specified and directed by Engineer-In-Charge.

S&F 125 mm long MS pressed handles, oval type stove anamelled black Complete all as specified and directed by Engineer-In-Charge.

S&F 150 mm long MS barrel tower bolt stove enamelled black with bright bolt and fixedComplete all as specified and directed by Engineer-In-Charge.

S&F 125 mm long MS barrel tower bolt stove enamelled black with bright bolt and fixed Complete all as specified and directed by Engineer-In-Charge.

S&F 200 mm long aluminium anodised barrel tower bolt of extruded section Complete all as specified and directed by Engineer-In-Charge.

S&F 150 mm long Aluminium alloy handles, cast type, anodised all as directed.

S&F 300 mm long aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extuded sections Complete all as specified and directed by Engineer-In-Charge.

M&L clean swan second class soft wood in scantling Complete all as specified and directed by Engineer-In-Charge.

M&L 6mm thick venered decorative plywood grade 1 (BWR Resin) with decorative face veneers on one face fixed with nails to timber frame work on walls Complete all as specified and directed by Engineer-In-Charge.

M&L 6mm thick venered decorative plywood grade 1 (BWR Resin) with decorative face veneers on one face fixed with nails to timber frame work on ceiling Complete all as specified and directed by Engineer-In-Charge.

M&L for 2nd class soft wood exc 13 cm & n exc 25 sq cm sectional area in plain fillets. square, rectangular or triangular in section, clean sawn, se-cured with nails or brads Complete all as specified and directed by Engineer-In-Charge.

M&L plain fillets square rectangular or triangular in section clean swan secured with nails or brads n exc 3 and n exc 6 sqcm Complete all as specified and directed by Engineer-In-Charge.

S&F vitreous china urinal bowl type of size 465 x 355 x 265 mm white (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, with brackets, flush pipe, grating and union for discharge pipe.back, (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) and including flush pipe of polyethylene of low or high density or PVC 32mm dia, for urinal, and PVC Connections 15mm size with PTMT nuts of length 450mm Complete all as specified and directed by Engineer-In-Charge.

S&F in rep vitreous china urinal bowl type of size 465 x 355 x 265 mm white (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, with brackets, flush pipe, grating and union for discharge pipe.back, (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) and including flush pipe of polyethylene of low or high density or PVC 32mm dia, for urinal, and PVC Connections 15mm size with PTMT nuts of length 450mm Complete all as specified and directed by Engineer-In-Charge.

S&F vitreous china wash basin coloured oval type size 550 X 400 mm excluding tap, chain, plug but including flush pipe of polyethylene of low or high density or PVC, 32" dia , for WHB and bottle trap of 32 mm dia, waste couplingComplete all as specified and directed by Engineer-In-Charge.

S&F in repair vitreous china wash basin coloured oval type size 550 X 400 mm excluding tap, chain, plug but including flush pipe of polyethylene of low or high density or PVC, 32" dia , for WHB and bottle trap of 32 mm dia, waste coupling Complete all as specified and directed by Engineer-In-Charge.

S&F in repair Vitreous China squatting pan “Orissa pattern” size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipe) with CI ‘P’ trap of long arm of suitable size including connection to flush pipe, anti symphonic pipes etc , complete all as specified.

S&f Vitreous China squatting pan “Orissa pattern” size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipe) with CI ‘P’ trap of long arm of suitable size including connection to flush pipe, anti symphonic pipes etc , complete all as specified.

S&F in repair low level flushing cistern capacity 10 PVC valveless, syphonic action type , white, with inlet, ball valve, float and handle including brackets including flush pipe of polyethylene of low or high density of PVC, 32 mm dia, for low level cistern Complete all as specified and directed by Engineer-In-Charge.

S&F low level flushing cistern capacity 10 PVC valveless, syphonic action type , white, with inlet, ball valve, float and handle including brackets including flush pipe of polyethylene of low or high density of PVC, 32 mm dia, for low level cistern Complete all as specified and directed by Engineer-In-Charge.

S& Tubular towel rail CP 20 mm dia D-type 60 cm long between flanges, including brackets and fixed to walls, Complete all as specified and directed by Engineer-In-Charge.

S&F for PVC (SWR) pipes single socketed in any length with rubber ring joint laid in trenches or in floors for 75mm bore of pipe Complete all as specified and directed by Engineer-In-Charge.

S&F for PVC (SWR) pipes single socketed in any length with rubber ring joint laid in trenches or in floors for 110mm bore of pipe Complete all as specified and directed by Engineer-In-Charge.

S&F for PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls for 75mm bore of pipe Complete all as specified and directed by Engineer-In-Charge.

S&F for PVC (SWR) vent cowl, plain including jointing with solvent cement 75mm bore complete all as specified Complete all as specified and directed by Engineer-In-Charge.

S&F for PVC (SWR) floor bend, plain including jointing with solvent cement 75mm bore Complete all as specified and directed by Engineer-In-Charge.

S&F for PVC (SWR) floor bend, plain including jointing with solvent cement 110mm bore cComplete all as specified and directed by Engineer-In-Charge.

S&F 110mm bore PVC (SWR) T any radius Complete all as specified and directed by Engineer-In-Charge.

S&F for PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75mm bore Complete all as specified and directed by Engineer-In-Charge.

S & F for PVC (SWR) gully trap, plain with grating including jointing with solvent cement 110 mm bore Complete all as specified and directed by Engineer-In-Charge.

S&F grating doom 125mm dia with waste hole of PTMT (min wt 40 grams)Complete all as specified and directed by Engineer-In-Charge.

S&F PVC connection 15 mm size with PTMT nuts of length 600 mm Complete all as specified and directed by Engineer-In-Charge.

S&F 15mm dia CP fancy type pillar taps, cast copper alloy, with capstan heads, screwed down high pressure, with or without letterede 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed

S&F CP Brass fancy type bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed for complete all as specified and directed by Engr-in-Charge

S&F in rep for CP Brass fancy type bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed for complete all as specified and directed by Engr-in-Charge

S&F in rep for CP brass fancy type stop valves, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engr-in-Charge

S&F CP brass fancy type stop valves, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engr-in-Charge

S&F 20mm dia for ball valve high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe and fixed (Min weight 15mm-142gms/2.0mm-210gms/25mm-455gms/40mm-690gms) complete all as specified and directed by Engr-in-Charge

S&F in replacement of 15mm bore gun metal gate valves, with iron wheel head, screwed both ends suitable for iron pipe Complete all as specified and directed by Engineer-In-Charge.

S&F 20mm PP-R gate valves (brass insert) as per requirement of the site Complete all as specified and directed by Engineer-In-Charge.

M&L for PVC Nahani trap 75 mm dia with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) Complete all as specified and directed by Engineer-In-Charge.

S&F for 20mm bore, 3-layer PP-R polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stbility for hot & cold water supply incuding all PP-R plain & brass t hreaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc (due to extreme below zero temp in region) Complete all as specified and directed by Engineer-In-Charge.

S&F for 25mm bore, 3-layer PP-R polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stbility for hot & cold water supply incuding all PP-R plain & brass t hreaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc Complete all as specified and directed by Engineer-In-Charge.

S&F Rotational moulded polyethylene water storage tanks of 500 litres capacity (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, oulet and over flow pipe and provision of wash out pipe etc Complete all as specified and directed by Engineer-In-Charge.

S&F Rotational moulded polyethylene water storage tanks of 1000 litres capacity (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, oulet and over flow pipe and provision of wash out pipe etc Complete all as specified and directed by Engineer-In-Charge.

M&L chequered cement concrete tiles 30cmx30cmx 20mm thick with grey cement and pigments set and jointed and pointed in neat cement slurry over 20mm thick screed bed in CM 1:6 on floor Complete all as specified and directed by Engineer-In-Charge.

Material and labour for concrete bed to 100mm bore drain pipes including packing under and hunching against the sides of pipes in cement concrete (1:3:6) type C-2 (using 40 mm graded aggregate) after they are laid and tested all as specified and as directed by the Engineer-in-Charge.

Material and labour for concrete bed to 150mm bore drain pipes including packing under and hunching against the sides of pipes in cement concrete (1:3:6) type C-2 (using 40 mm graded aggregate) after they are laid and tested all as specified and as directed by the Engineer-in-Charge.

Supply only integral water proofing compound ISI marked Complete all as specified and directed by Engineer-In-Charge.

M&L for LLDPE septic tank, designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, vent shaft, connection etc complete for 05 users Complete all as specified and directed by Engineer-In-Charge.

M&L for soakage well excavation in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of brick masonary in CM, RCC cover slab in M25/SFRC Cover, interconnecting pipes of RCC/DWC complete with brick bats of size 1.2m dia and 1.5m efective depth,Complete all as specified and directed by Engineer-In-Charge.

Taking down carefully copper/aluminum point wiring (light. Fan, socket or power) complete, incl fittings such as switches, ceiling roses, pendants, regulators, sockets etc, removing materials to store for keeping in safe custody for reuse at site and making good disturbed surfaces of walls, floors etc.

M&L for point wiring in PVC casing caping with multi stranded FRLS copper conductor cable of size 1.5 Sqm including clamps, screws guttier/plug etc PVC unsheathed cable into and including wooden board with bakelite sheet and PVC insulated FRLS cable of size 1.5 Sqmm as earth continuity conductor.

(a) One light point/fan point/ex fan point controlled by one 5 Amps switch one way Complete all as specified and directed by Engineer-In-Charge.

(b) One light point controlled by one 5 Amp two way switch Complete all as specified and directed by Engineer-In-Charge.

(c) One call bell point controlled by one bell push Complete all as specified and directed by Engineer-In-Charge.

(d) One 3 pin 5 Amp switch socket outlet on independent board Complete all as specified and directed by Engineer-In-Charge.

(e) One 3 pin 5 Amp switch socket outlet on same board with accessories Complete all as specified and directed by Engineer-In-Charge.

M&L for point wiring in PVC casing and caping with 2.5 Sqmm size multi stranded FRLS copper conductor cable including clamps, screws guttier/plug etc PVC unsheathed cable into and including wooden board with bakelite sheet and PVC insulated fire retardant cable of size 2.5 Sqmm as earth continuity conductor Complete all as specified and directed by Engineer-In-Charge.

S&F switch piano Flush type, single pole, one way 6 amp 240 volts,Complete all as specified and directed by Engineer-In-Charge.

S&F Switch socket combination 2 in 1, 3 pin, 15 Amp box type universal,Complete all as specified and directed by Engineer-In-Charge.

S&F switch piano Flush type, single pole two way 5 amp 240 volts,Complete all as specified and directed by Engineer-In-Charge.

S&F Socket outlet 2 in 1, 3 pin, 5 Amps, flush type Complete all as specified and directed by Engineer-In-Charge.

S&F switch piano Flush type, single pole16 amp 240 volts,Complete all as specified and directed by Engineer-In-Charge.

S&F Socket outlet 2 in 1, 3 pin, 5 Amps, flush type Complete all as specified and directed by Engineer-In-Charge. Note : Taking down of socket outlet included in taking down point wiring

S&F Socket outlet 2 in 1, 3 pin, 5 and 15 Amps, flush type Complete all as specified and directed by Engineer-In-Charge.

S&F Switch socket combination 2 in1, 3 pin,5 Amps box type,universsal Complete all as specified and directed by Engineer-In-Charge.

Taking down fan, sealing cable end, dismantling blades and removing fan and blades to store Complete all as specified and directed by Engineer-In-Charge.

M&L Hanging only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan Complete all as specified and directed by Engineer-In-Charge.

S&F Stepped type electonic fan regulator flush type on the existing phenolic laminated sheet Complete all as specified and directed by Engineer-In-Charge.

Supply and fix ceiling rose 3 terminal / PVC/ Polycarbonate, isolated body Complete all as specified and directed by Engineer-In-Charge.

S&F Bell ding dong A/C 230 Volts single pole Complete all as specified and directed by Engineer-In-Charge.

S&F Lamp Holder, PVC/ Polycarbonate type with back plate suitable for batten fitting Complete all as specified and directed by Engineer-In-Charge.

S&F Distribution Board, TPN 16 Way, Double door complete all as specified and as directed Complete all as specified and directed by Engineer-In-Charge.

S&F in repairs sheet metal enclosure for DBs to be used for single pole neutral 8 way with 200amps rated bus bar DBs 240V Make:- Siemens/ Legrand/GEC/ Schneider. Complete all as specified and diretced by Engineer-In-Charge.

S & F MCB SP 6 to 32 Amps, 240 Volts, Gold plus MCB B Curve Complete all as specified and directed by Engineer-In-Charge.

S & F MCB SPN 6-32A Amps 240 Volts Gold plus MCB B Curve Complete all as specified and directed by Engineer-In-Charge.

S & F MCB, DP 40 Amps 415 Volts Gold plus MCB C CurveComplete all as specified and directed by Engineer-In-Charge.

Supply and fix MCCB 3 Pole, 415 V, fixed type, 100 Amps with breaking capacity 16 KA Complete all as specified and directed by Engineer-In-Charge.

S&F exhaust fan fan of size 230 mm sweep, non metallic complete all as specified and as specified and as directed. Make : Havells code No. Ventil Air - DB white/CG/Bajaj

S&F LED Lamp 15 W Complete all as specified and directed by Engineer-In-Charge.

S&F LED Lamp 9 W 'T'' type Complete all as specified and directed by Engineer-In-Charge.. Make : Havells cat No. NU Bulb Plus 9 W 865 B22 4 Star/ Philips / Bajaj/Crompton

S & F enviroment Friendly ,energu saving,suface mounted ,decorative oval bulk head edge-lit luminaire comprising of high brightness LEDs 10W LED, IP-65 Complete all as specified and directed by Engineer-In-Charge. Make : Havells or equivalent in Bajaj/PHILIPS/CG

S&F surface and wall mounted led tube light fitting 22W, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver including connection from ceiling rose to tube light with suitable size of flexible cable complete all as specified and as directed by Engr in Charge. Make : Havells LHEXBTP7IN1S022 /Bajaj/CG/Philips

S&F endura linear leo surface and mounted LED tube light fitting 18 W, four feet, extruded aluminium housintg provided for efficient heat dissipation with polycarbonate diffuser & integerated electronic driver complete all as specified and as directed by Engr in Charge. Make Havells/Bajaj/Philips/CG

S&F Linnet LED mirror light 14 W 1 feet made of extruded engineering plastic suitable for surface mounting on a ceiling of wall complete all as specified and as directed by Engr in Charge. Make : Crompton/Havells/Bajaj/Philips

M&L for Sub main wiring with 2 runs of 6 sqmm PVC insulated multi stranded FRLS copper cable drawn through PVC casing capping of required size with accessories along with 1 run of 6 sqmm copper cable as earth continuity conductor including taking down the old existing submain wiring complete all as specified and as directed. Note :- Two runs of 6 sqmm and one runs of 6 sqmm cable as earth along with PVC conduit will be measured as one length.

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 10 sq. mm 2 core stranded conductor in service connections Complete all as specified and directed by Engineer-In-Charge.

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 16 sq. mm 2 core stranded conductor in service connections Complete all as specified and directed by Engineer-In-Charge.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35.0 sq mm 3.5 core

Aluminium strip 25 x 3.15mm with saddles and fixing screws etc. for roof conductors and down conductors above ground Complete all as specified and directed by Engineer-In-Charge.

S&F Air termination, single pointed aluminium rod 12 mm dia and 300mm long Complete all as specified and directed by Engineer-In-Charge.

M & L for Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw as directed by Engineer in Charge.

M&L for Earthing complete with copper earth plate electrode 600x600x3 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to copper earth strip 20 x 3 mm (beyond 7.5m Main earthing lead from earth electrode to test point shall be measured and paid separtelly) by means of bolts and nuts check nuts and washers of galvanized iron or steel all as specified and shown in electrical plate no 3 of SSR part I including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 8mm dia 150mm long reinforcement, watering funnel with 15 mm dia light grade for watering and for protection of earth electrode 40 mm dia GI pipe Complete all as specified and directed by Engineer-In-Charge and tested on completion.

M&L for Earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth wire of 4 mm dia (up to 7.5 m in length from earth plate ) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no.3 of SSR part I including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 8mm dia at 150mm c/c in both ways as reinforcement, watering funnel, 20 mm dia light grade for protection of earth electrode, 20 mm dia GI pipe light grade for watering complete all as specified and as directed by Engineer in charge and tested on completion. Note : The rate is ilnclusive of necessary earth work, RFR and removal etc Complete all as specified and directed by Engineer-In-Charge.

Supply, Laying ,connecting/ jointing, charging, testing and commissioning LT cable electric cable of size 3.5 Core 35 sq mm, XLPE insulated, armoured, PVC sheathed, heavy duty, electric cable 1100 Volt grade with stranded aluminum conductor conforming to IS :7098, laid in trenches/ducts/fixed to wall /roofs/ poles all as specified.

Excavation in trenches not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr for laying of cables and getting out in hard /dense soil, complete all as specified and directed by Engineer-In-Charge.

M&L for sand cushioning to under ground cables with a layer of sand 8 cm before laying the cable and 15 cm after laying the cable. Complete all as specified and directed by Engineer-In-Charge.

M&L for sub class "B" bricks laid dry width wise across the line of cable in treanchs as cable protection. Complete all as specified and directed by Engineer-In-Charge.

S & F LED bulb of capacity 10watts lumen out put (500) length 102mm dia 56mm base cap B22 (ISI Mark) complete with all accessories Complete all as specified and directed by Engineer-In-Charge.

S&F heavt exhaust fan fan of size 300 mm sweep, AC single phase 220 volts 50HZ incl Louvers shutter, XPM jaali,grouting etc. complete all as specified and as specified and as directed. Make : Bajaj /Havells/Usha/CG/Khaitan

S&F 1200 mm sweep electric ceiling fan with double ball bearing complete with three number blades made of aluminium alloy .with suitable electronic type stepped regulator for opration of single phase ,AC 230 volts .50HZ, BEE 5 star rating complete all as specified and as specified and as directed. Make : Bajaj /Havells/Usha/CG/Khaitan

S&F GI tubing,Medium Grade, ISI Mark galvainsed of size 50mm with all fitting fixed on wall or Laid down in trenches and providing clamps Complete all as specified and diretced by Engineer-In-Charge

S&F GI tubing,Medium Grade, ISI Mark galvainsed of size 25mm with all fitting fixed on wall or Laid down in trenches and providing clamps Complete all as specified and diretced by Engineer-In-Charge

S&F in Repairs of stop valve /gate valve ,cast copper alloy ,screwed down ,crunch or butterfly handle with high pressure ,screwed both ends for iron pipe or unions and fixed including Taking Down of old one suitable for 25mm dia Complete all as specified and directed by Engineer-in-Charge.

S&F in Repairs of stop valve /gate valve ,cast copper alloy ,screwed down ,crunch or butterfly handle with high pressure ,screwed both ends for iron pipe or unions and fixed including Taking Down of old one suitable for 50mm dia Complete all as specified and directed by Engineer-in-Charge.

S&F endura linear leo surface and mounted LED tube light fitting 20 W, four feet, extruded aluminium housintg provided for efficient heat dissipation with polycarbonate diffuser & integerated electronic driver complete all as specified and as directed by Engr in Charge. Make Havells/Bajaj/Philips/CG

S&F LED Lamp 10 W Complete all as specified and directed by Engineer-In-Charge.

S&F Distribution Board,SPN 4 Way,Double door IP 43,as per IS 8623 including 200amp fully isulated copper bus bar ,earth bar,door eaething, reversible Door Pan asembly for easy installation and also incoming and outgoing connection with suitable size of lugs/thimbles concealed on the wall surface adjoining surface to match with finish Complete all as specified and directed by Engineer-In-Charge.

Supply,installation,Testing of SPN distribution board in Repair 4 way, Double Door IP 43,as per IS 8623 including 200amp fully isulated copper bus bar ,earth bar,door eaething, reversible Door Pan asembly for easy installation and also incoming and outgoing connection with suitable size of lugs/thimbles concealed on the wall surface adjoining surface to match with finish Complete all as specified and directed by Engineer-In-Charge.

S & F MCB Single pole and neutral pole (DP) 240 volts,50 hz breaking capacity 10KA,B curve ,6 to 32 AMP Domplete all as specified and directed by Engineer-In-Charge.

M&L for House Service Bracket (hook type) complete with 3.0 mtr long GI pipe 40mm dia medium grade ,two nos 90 degree bends, MS Hook and stay or guy complete all as specified and directed by Engineer-In-Charge.

m/s mohd rafiq lone