General Funds

Supply, fabrication, erection and fixing of Mild steel- C Channels, tubular sections, Plates for making of container shops including cost and conveyance of all the materials like Providing wall panelling with corrugated Gi sheets ,flooring using vinyl flooring on cement bonded boards of 18 mm thick ,ceiling and internal partitions using MDF boards-12mm, with wiring concealed and shall be PVC insulated copper wires suitable for Electrical system should be done as per capacity of 250 volts, 50 hz. 2.5 Sqmm cable for main cable and 1.0 Sqmm cable would be used for Lights, Fans and painting with synthetic enamel paint labour, operationl & incidental charges etc., complete for finished iem of work as directed by the Engineer-in-Charge Dimensions of the shop 10ft (L) x 8ft(D) x 9ft (H) (BMM-V-14, BMM-V.16 ) MS / GI Steel (4 Shops x 8 Containers As Per Above Specifications) 4 X 596.91 = 2387.64 X 8 = Total 19101.12 Kgs

Supply, fabrication and installation of Mild Steel Staircase of design as approved by the Engineer-in-Charge, with a minimum width of 1000mm and thread of 254 mm finished with 1 coat of Zinc oxide paint for anti-corrosion properties, 2 coats of synthetic enamel paint of desired shade, including all other costs, transportation and incidental charges, if any. (as per local quotation) for Stair Cases Total Weight Of 8 Containers ( 4 Shops ) in Kgs 4 Stair cases, shared by 8 containers, as per the above specifications) x Rs. 4 X (529.48 = 2117.92 Kgs)

Excavation for roadway in soil by Manual means including cutting and pushing the earth to site of embankment upto a distance of 100 m, including trimming bottom and side slopes in accordance with requirements of lines, grades and cross-sections as per Technical Specification Clause 302.3 MORD / 301 MORTH. (RBR-FNDN-1)

Filling with Stone crusher dust in the bottom layers not exceeding 15 cm thick, consolidating each deposited layer by ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work. (APSS NO. 309 & 310) excluding seigniorage charges. (RBR-FNDN-2)

Providing laying, spreading and compacting graded HBG crushed stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanicla mixer (pugmill), carriage of mixed material by tipper to site laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth whell roller of 80 to 100kn/vibratory roller 80-100kn weight to achieve the desired density including lighting barricading and maintenance of devirsion etc as per tabels 400.11 & 400.12 amd technical Specification Clause 406 MORD/MORTH.

Brick Masonary in C.M (1:5) using 2nd Class well burnt ground moulded traditional size bricks of locally available having a crushing strength of not less than 35 Kg./Sq.Cm & size of 23x11x7 Cm including cost & conveyance of Material to site, mixing of Cement Mortar & laying of bricks & mortar to specified thickness, watering, curing, including all scaffolding, hire & operational charges of Machinery, all Labour charges & all water lead charges etc. complete for finished item of work. (BLD-CSTN-3-1)

Providing concrete M 30 Grade using 20mm Graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD and 1500, 1700 & 2100 MORTH.RCC M30 Design mix using 20mm graded metal machine crushed as per SS machine mixing cost and conveyance of metal, seigniorage etc.,complete for Culvert Slabs

Flooring with 25mm thick polished shabad stones set over base coat of CM (1:8) over already laid CC bed / RCC Roof Slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sqm. & Jointed with neat cement to full depth including cost of all materials like cement, sand, and water and flooring stones etc., complete, including seigniorage charges, labour charges for dressing of flooring stones etc., complete for finished item of work, but excluding the cost of conveyance of all materials. (BLD-CSTN-7-1)

Plastering with CM 2 coats, 12 mm thick, base coat in CM (1:5), 8 mm thick and top coat in CM (1:3), 4mm thick with Dubara sponze finishing

Supply and delivery of HDPE pipes of PE-100 grade PN 6Kg/Cm2 conforming to IS specification 1984/1995 including transportation anywhere in AP for 225mm dia

a) for 160mm dia

b) for 110mm dia

Lowering, Laying and Jointing of HDPE pipes of PE-100 grade PN 6Kg/Cm2 a) 225mm dia

a) for 160mm dia

b) for 110mm dia

Supply and delivery of HDPE specials including cost and conveyance of all materials as directeded by department offecer For 110 mm dia HDPE Tee

110 mm dia HDPE Bend

110 mm dia HDPE Dummy

110x125mm reducer HDPE

225mm dia Elbow HDPE

225mm dia PVC Dummy

160mm dia Elbow HDPE

160mm dia PVC Dummy

2'' flange HDPE(OD 50mm)

2'' Collar HDPE

2'' PVC Tail Piece

2'' PVC Coupling

63x40mm reducer HDPE

25mm dia CVPC Elbow

25mm dia CVPC Dummy

25mm dia CPVC pipe (MAT-02313 : BMW-I.221 : @ 22.20mm ODPipe - SDR 13.5)

48mm dia UPVC pipe(MAT-03723)

48mm dia UPVC coupling

48mm dia UPVC Elbow

Engage of plumbers on hire basis/day including all labour charges etc completed to ss

Providing Figurative/Non figarative /Stencils/Letter Writing/Art Work on walls over a double coats of Enamel paint with Professional Artists duly Clearing of wall Surface completely and making the base with single coat of oil primer including ,scaffolding charges, cost of paints of any standard make having ISI Mark ,cost brushes,pallets,oils and any other incidental materials cost and Labour charges for artistsetc,. Complted as direected by the departmental authorities

Flooring with 18 to 20mm thick high polished granite stone slabs other than black and premium colours (i.e. of shades like paradiso / bala flower / copper silk / laka red / lavender blue) with borders and design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:8) , 20mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, polishing charges and all other taxes on all materials, cost of base coat and overheads & contractors profit complete for finished item of work (S.S.701 & special)

Collection, Supply and spreading of Red Soil including cost and conveyance of material to work site, stacking to deptl. gauge and labour charges etc.complete for shoulders as per Table 400- 8 & 9 of MORTH (Index code : rbr-fndn-2)

Supply. fabrication and installation of Mild steel Man hole covers with angular frame alround of size 0.75 x 0.75 m with chequred plate on bottom of man hole cover finished with one coat of zinc oxide paint for anti corrosion properties, 2 coats of synthetic enamel paint of desired shade, including all other costs, transportation and incidental charges (as per local quotation )

Supply. fabrication and installation of Mild steel bridge connections with a minium width of 1000 mm and a length of 2350 mm with chequred plate on top of pathway for one bridge connection set shared by ( 2 no's of containers, where staircase set is absent ) finished with one coat of zinc oxide paint for anti corrosion properties, 2 coats of synthetic enamel paint of desired shade, including all other costs, transportation and incidental charges . ( as per local quotation )

Supply and plantation of Australian palm trees including all incidental charges etc, completed for planted item as per quotation

Supply and Delivery of 4 PAIR CAT6 CABLE for OUTDOOR

Providing Labour Charges for laying of Cat 6 Cable over head (Meter)

Excavation for roadway in soil by Manual means including cutting and pushing the earth to site of embankment upto a distance of 100 m, including trimming bottom and side slopes in accordance with requirements of lines, grades and cross-sections as per Technical Specification Clause 302.3 MORD / 301 MORTH. (RBR-FNDN-1)

Filling with Stone crusher dust in the bottom layers not exceeding 15 cm thick, consolidating each deposited layer by ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work. (APSS NO. 309 & 310) excluding seigniorage charges. (RBR-FNDN-2)

Plain Cement Concrete (1:4:8) for under bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., complete for finished item of work. (APSS No. 402)

Laying VCC (1:2:4) using 20mm HBG m/c metal and OPC including cost & conveyance of all materials, labor charges, machinery, laying in position, mechanical mixer, vibration, curing and all incidental charges etc., complete.

Laying VCC (1:2:4) using 20mm HBG m/c metal and OPC including cost & conveyance of all materials, labor charges, machinery, laying in position, mechanical mixer, vibration, curing and all incidental charges etc., complete.

RCC (1:2:4) mix using 20mm HBG metal machine crushed as per SS machine mixing cost and conveyance of metal, seigniorage etc.,complete for Culvert Slabs

M.S. Ornamental Railing / Grills including cost & conveyance all materials ,fabrication, labour charges ,sales taxes a coat of red oxide primer etc complete. and as directed by the Departmental officers complete for finised item of work.

Providing & Placing on Terrace(at all floor levels) polyethylene water storage tank of Double layer Roto moulded confirming to IS:12701 approved brand & manufacture with suitable cover/cap and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks

Manfacturing, Supply and Delivery of the MS Frame Statue

Supply , Delivery and fixing of Stainless Steel 304 Wash Basins with stand

Supply, manufacture and installation of Street furniture as per the design specified and authorised by the Architect-in-charge, with countertop seating finished with 16mm thick Cement Bonded Particle Designer board available Designs Lumber/Quadra/Murk. Standard size of bench searting is 8’X2’. Considering 4 serving counters per each commercial module. (as per quotation)

Supply of Urban Decorative POLIZ Column pole of 6000mm made of HDGI with Dark Grey Powder coat finish. Dimensions: 150*150*6000mm, 3mm Thk. having 2.5 Meter CNC on all four sides. Provision for Speaker at 1250mm from the baseplate, Provision for mounting Camera at 5000mm height from the base plate of dimensions 125 W*200mm H to embed the dome camera. There shall be seperate G.I conduit for cable entry for each elemet provided. Rated Wattage: 50Watt, CCT: 4000K/6000K, IP66, IK09, P.F>0.95, THD<5%, External SPD of 10KV, There shall be a service door lazer cut of dimensions 100*300mm for LILO connections and seperated door for POE connections, There shall be Brand LOGO litup above the service door.Total Tolerance ± 7%. The provisions shall be as per the drawing approved by the department. Make: LIGHTMAN/ IGUZZINI / BEGA, Cat, or any Other Brand .

Supply of Urban Decorative POLIZ Column pole (Bollards) up to 1200mm made of HDGI with Dark Grey Powder coat finish. Dimensions: 150*150*1200mm, 3mm Thk. having 2.5 Meter CNC on all four sides. There shall be seperate G.I conduit for cable entry for each elemet provided. Rated Wattage: 50Watt, CCT: 4000K/6000K, IP66, IK09, P.F>0.95, THD<5%, External SPD of 10KV, There shall be a service door lazer cut of dimensions 100*300mm for LILO connections and seperated door for POE connections, There shall be Brand LOGO litup above the service door.Total Tolerance ± 7%. The provisions shall be as per the drawing approved by the department. Make: LIGHTMAN/ IGUZZINI / BEGA, Cat, or any Other Brand . Ref: LM POLIZ COLUMN-6M-SMART.(As per Local Quotation )

Foundation and erection charges with special T&P, for 6/7.50 Mtrs long Octagonal /Conical pole duly erecting on base plate duly providing 4 Nos foundation bolts with nuts with providing of 0.45Mtr x 0.45Mtrs x1.20 Mtr size M20 cc work vibrated concreting mixing with necessary steel (10kgs) reinforcement and curing for 7 days as directed by the field engineers during execution including excavation of Earth/BT all labour charges and cost and conveyance of materials etc.complete. ( as per local quotation )

Foundation and erection charges for 1 Mtrs long Bollard duly erecting on base plate to anchor bolt 4 Nos with providing of 0.3Mtr x 0.3 Mtrs x0.3 Mtr size M20 cc work vibrated concreting mixing with curing for 7 days as directed by the field engineers all labour charges and cost and conveyance of materials etc.complete ( as per local quotation )

Supply and transportation of 16 SqmmX 4 core XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I)./1554-I Makes: Torent / Universal / Unicab / Havells / KEI / Gloster / Finecab / Polycab /RR Kabelc (MAT-03420)

Supply and making end termination with heavy Alluminium lugs (pin/ ring type) as per IS specification duly crimped with crimping tool, PVC tape etc of up to 16 sqmm Makes:Dowels/Jainson/Comet(ELE-4.1.13) (MAT-03560)

Supply and making end termination with heavy Alluminium lugs (pin/ ring type) as per IS specification duly crimped with crimping tool, PVC tape etc of 25 sqmm Makes:Dowels/Jainson/Comet (MAT-03561)

Supply and laying of PVC insulated 3 core 2.5 Sqmm sheathed flexible copper cable for voltage up to 1100V as per IS 694/1990 inlcuding all labour cost and conveyance of all materials and labour charges etc., complete Make Finolex / RR kabel / Havells /KEI/Polycab/ Gloster/ Goldmedal/GM(ELE-3.1.4)

Supply and Transportation of Outer dia 50mm and Inner dia 38mm double walled corrugated HDPE duct made as per specification BSEN - 500 86/IS 14930 Part-II. Makes:DURA LINE (Dura Guard)/Precision or its equivalent make. (MAT-03591)

Supply and fixing of suitable out door type feeder piller box made with 14 SWG CRCA sheet after 7 tank process including S & F of Legrand / Schnieder / L&T make 40-63A FP MCB, 9 Nos SP MCB's,din chanel, bus bars, 6 Sqmm 3 core copper cable for internal wiring , contactor, connectors and provision for energy meter etc., complete for finished item of work.(ELE-6.1.25)

Supply and fixing 4way TPN Distribution board with IP-42 protection (Metal Door) suitable for 3 phase ELCB / RCCB / FP Isolator as incomer and 10kA SP MCBs as outing going including internal connection and labour charges for surface / flush mounting etc., complete. (Each per container) 63A FP Isolator - 1 No for incomer, 10kA-6-32A SP MCBs - 12Nos for outgoing.

Supply and transportation of 2 core flat flexible twisted wire for sepakers in light poles including cost and conveyance of all the materilas, transportation and labour charges etc., complete for finished item of work ( as per local quotation )

Supply of Urban CITY SMART Column Light Pole of 6000mm height, Dimensions: 165mm*6000mm, 5.4Thk. Pole shall have provisoins for SOS system with SOS button and buzzer of 12V/24V with provision to run on 240V, mounted at 2000mmfrom the baseplate. SPEAKER: The chamber of 600mm height with CNC speaker door of 120*300mm height with holes of 5mm, with provison to mount PAS. BRANDING: The chamber of 600mm height with CNC - NMC branding lit up with LED Polytube with UV treated Acrylic. SHOOTERS: The chamber of 600mm height with CNC door cut on either sides with provision to mount 2Nos shooters of 20Watt facing each on either sides of the road with IP connectors. CAMERA: The chamber of 600mm height with CNC door cut on either sides with provision to mount 2Nos Camera facing each on either sides of the road with IP connectors. FIXTURE: A chamber of 800 mm height with UV treated Acrylic tube having LED module of Rated Wattage: 50watt, CCT: 4000K, IP65, IK07. The pole shall have a service door for LILO connections with Din rail mounted MCB and TPN connectors. each chamber shall be interlocked with spigot of 100-150mm tightend with TVS grub screws. There shall be controll box of 120*300mm height for mounting, internal connections, sockets and pluging of all connections. there shall be seperated conduit running through out the pole for LAN and electrical cable seperately. The base plate shall be 250*250*12mm thk. and finish shall be Munshil Grey. The pole shall not accompany/ include and software integration or total network intergartion to CCMS. CAT.REF:LM-6M-SMARTPOLE ALLINONE ( as per local quotation )

Supply and transportation of 25 Sq mm X 3.5 core XLPE insulated, 1100V grade armoured aluminum cable as per specification confirming to IS:7098 (Part - I)./1554-I Makes: As per list of recommended brands as category I.

Supply and transportation of 50 Sq mm X 3.5 core XLPE insulated, 1100V grade armoured aluminum cable as per specification confirming to IS:7098 (Part - I)./1554-I Makes: As per list of recommended brands as category I.