Repair / Maint of water supply pumping sets, pipe line and allied items at Dholewal, CG Complex and Doraha under GE Ludhiana.

Amount

S&F in replacement automatic star-delta starter in sheet metal enclosures, 415 volts, 3 phase, 50 Hz type ML-3 with overload relay range 36-60 Amp suitable for up ot 35 HP electric motor all as specified and directed by Engineer-in-charge. Make:-L&T Havells/HPL/C & S /Hager/Schenider.

S&F in replacement of 1100 volts grade heavy duty PVC insulated flat submerssible cable 16 sqmm, 3 core with copper conductor all as specified and directed by Engineer-in-charge. Make:- Havells, Finolex,KEI, Polycab

S&F in replacement of 1100 volts grade heavy duty PVC insulated flat submerssible cable 10 sqmm, 3 core with copper conductor all as specified and directed by Engineer-in-charge. Make:- Havells, Finolex,KEI, Polycab

Supply and fixing in replacement 3 metre long column pipe 80mm dia made out of medium grade GI pipe with two number flanges welded at both ends having drilled hole and cut for submersible cable all as specified and directed by Engineer-in-charge.

Supply and fixing in replacement 3 metre long column pipe 100mm dia made out of medium grade GI pipe with two number flanges welded at both ends having drilled hole and cut for submersible cable all as specified and directed by Engineer-in-charge

S&F in repair Over load relay 0 to 63 Amps 415 V Make : L&T/Siemens/Indo Asian/HPL

S&F in repair Contactor ML-3 , 415V Make : L&T/Siemens/Indo Asian/HPL

S&F in repair Single phase preventor VSP-3 . Make : Minilack/L&T/Siemens

S&F in repair Star delta timer ETR Make : L&T/Siemens/Indo Asian/HPL

S&F in repair digital type Voltmeter 0 to 500 Volt 96 x96mm square 415 volt . Make : L&T/AE/Siemens

S&F in repair digital type Ampre meter 0 to 200 amp 96x96mm with CTs square. Make : L&T/AE/Siemens

S&F in replacement of phase indicating lamp (Red , yellow, & Green) complete.

Lifting of complete submersible pump set of any make & capacity from the tube well 300/200 mm dia along with connected accessories such as column pipe of 100/80 mm dia approx 30m length, submersible cable, nut bolts etc. complete all as specified and directed by Engineer-in-charge.

Transportation of submersible pump set 3 phase any make and capacity 25/30 HP from pump house & other location at Dholewal, CG complex and Doraha to contractor's workshop for carryout necessary repair work of submersible pump set and transporting it back to site after repair all as specified and directed by Engineer-in-charge

Dismantling of submersible motor of any make of capacity 25/30 HP and incl new nut and bolt reassembling complete set after carryout necessary repair work & testing complete for smooth functioning to the entire satisfaction complete all as specified. Note - New spare parts/components shall be measured and paid separately under supply only.

Rewinding of submersible motor of any make & capacity 25/30 HP by using existing size and gauge of PVC insulated single core copper conductor submersible winding wire including all insulated material complete . Make- Usha/Devidayal/SI.

Supply only upper & lower housing bushes consisting of 3 Nos gun metal bushes complete.

Supply only of stainless steel sleeves consisting 3 Nos bushes.

Supply only 'O' ring kit and oil seal kit.

Supply only thrust bearing exel (carbon) for 25/30 HP.

Supply only of thrust bearing plate.

Supply only sand guard gun metal.

Supply only of water seal.

M&L for Repair to bowl bush with housing by proper lath machine work milling of pump saft & replacement of bowl bush all as specified and directed by Engineer-in-charge

Supply only gun metal bush of the pump set.

Supply only gun metal impeller bush.

Supply only neck ring of impeller.

Supply only key for impeller.

Supply only impeller gun metal suitable for pump set.

Supply only pump shaft made out of (stainless steel ) for pump assembly.

M&L for painting to pump set of any capacity with two coat of synthetic enamel paint all as specified and directed by Engineer-in-charge

S&F, rubber packing 2 mm thick consisting of 8/6 hole for 80/100mm to 150mm column pipe all as specified and directed by Engineer-in-charge

M&L for Jointing the submersible cable with wiring of motor by means of jointing material & making the leak proof joint complete all as specified and directed by Engineer-in-charge

Lowering, connecting, testing, commissioning of repaired pump set of any size & capacity upto 25/30 HP 3 phase 400 to 440 Volts into tube well 300/200mm size along with connected items such as column pipe (100 to 150mm ) dia approx 30 RM tightening of nut bolts submersible cable etc all as specified and directed by Engineer-in-charge

M&L, disconnecting water & electric connections and taking out existing chlorination pumping set, transporting & servicing of the pump and motor at manufacturer's authorised workshop, bringing back the pumping set at original location, reconnecting and testing the same complete all as specified and directed by EIC . Note:-Supply and replacement of defective parts required to be replaced shall be measured and paid separately under appropriate item of this schedule.

M&L, Pressure gauge for pump at Pump houses / tubewell all as specified and directed by Engineer-in-charge

Supply only water TDS meter elctronic/ digital type all as specified and directed by Engineer-in-charge

Supply only Distribution chart/ board for water distribution network to the writing letter locations all as specified and directed by Engineer-in-charge

S & F in repairs GM gate valve with iron wheel head, serewed both ends for iron pipe and fix size 15mm Make:- Kirloskar/Leader/L&T/Zoloto

S & F in repairs GM gate valve with iron wheel head, serewed both ends for iron pipe and fix size 20mm Make:- Kirloskar/Leader/L&T/Zoloto

Supply and replacement of following parts of chlorination pumping set pump and motor of capacity 180 watts :-

Suction valve assembly

Injector valve assembly

Dosing head assembly

FRP container of capacity 150 ltr

Ram assembly Injector valve assembly

Double ball valve

Supply only stequa purity verifier 41021 (chlorine and PH verifier test kit for water).

M & L for MS plate /sheet plain or chequered, 3.00 mm thick cut to pieces as required and fixed to MS frame work by means of Electric arc/gas welding all as specified and directed by Engineer-in-charge

M&L for prepation new painted metal surfaces of any description, over 10cm in width or girth and appling two coat of synthatic enamil paint of approved tint over one coat of redoxide complete all as specified and as directed by engr-in-charge.

M&L for prepation old painted metal surfaces of any description, over 10cm in width or girth and appling one coat of synthatic enamil paint of approved tint all as specified and directed by Engineer-in-charge

Supply, install, testing and commissioning in-replacement LT panel, indoor cubicle type weather and vermin proof totally enclosed made out of 3.00 mm thick CRCA sheet machine pressed of suitable size of panel not less than 1.2 x 1.2 x 0.9 mtr, suitable to operate on 3 phase 4 wire system , 415volts, 50 Hz with front and rear openable with locking arrangement incl shutters for mounting switchgears etc, bottom gland plate with sufficient numbers of circular cable entry holes , prewired complete duly powder coated with pretretment of 7 tank process mounted on angle iron stand made out of angle size 50 x 50 x 6mm grouted in PCC (1:3:6) 450mm above ground level, 400mm below ground level comprising with following complete all as specified:- (i) Bus bar strip,four pole and capacity 200 Amps copper strip size be based on 1.5 Amps per sqmm, coloured with plastic coated insulated and sleaves in four colours (Red,Yellow , blue and black ) fixed on porcelain insulators with necessary nuts and blots and washers etc (ii) INCOMING : - (a) MCCB 100 Amp, 415 V, 25 KA, 4 pole with adjustable thermal magnetic release -01 No.Make:-L&T /Hager/Schenider/ Havells/HPL. (b) Panel multi function meter with LED display meter of size 96x96 mm with LCD display , accuracy class 1.0, having parameters Voltage, Current, Frequency, Power factor, Power & Energy with RS 485 including suitable CT complete all as specified, duly prewired with suitable size of copper insulated FRLS wire with universal code (c) Indicator with LED lamps for RYB , 3 Phase with MCBs set of three -01 set (iii) OUTGOING:- (a) MCCB 63 Amp, 415 V, 25 KA, 4 pole with adjustable thermal magnetic release -01 Nos.Make:-L&T /Hager/Schenider/havells/HPL (b ) Onload Changeover Switch 63 A, 4P 415 V Open Execution Type -01.Make:-L&T /Hager/Schenider/Havells/HPL (c) MCB SPN 32 Amp, 240 V, 10 KA, -02 Nos.Make:-L&T /Hager/Havells/ HPL (d) MPCB 63A -01.Make:-L&T /Hager/Schenider/HPL (e) SP Preventor type VSP3 -01.Make:-L&T /Hager/Schenider/HPL/Havells/Minilec (f) Star delta starter DOL three phase 36-60A-01 Nos.Make:-L&T /Hager/Schenider/havells/ HPL

M & L for Earthing complete inl eath work for LT Panels/ Feeder Pillars with galvanised steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground vertically at a depth not less than 2.25 metres below normal ground level with top edge of the plate at a depth not less than 1.5 metres below normal ground level, connected with and including GI strip 32mm x 6mm and including GI pipe 50mm bore light grade as protection pipe (from top of earth plate up to the test point) by means of GI bolts, nuts, check nuts and washers of GI and thimbles, earth plate surrounded by packed layers of charcoal dust and common salt 15cm thick, all around including top and bottom and watering pipe 20mm bore of GI pipe medium grade with funnel and wire mesh, PCC chamber of size 300x300x300mm(top of chamber minimum 15 cm above the normal ground level (1:3:6) using 20mm graded stone aggregate and RCC cover (1:2:4) type B-I using 20mm graded crushed stone aggregate of 25mm thick with 2 nos MS handles of 12mm dia including necessary excavation/ earth work in any type of soil/rock and as shown in Electrical plate No. 3 of SSR Part-I (2009) testing on completion complete all as specified. Note : 1. If result is not satisfactory then contractor will do 2nd earthing on his own cost

Supply and Fix , MCCB 125 Amp, 415 V, 16 KA, 4 pole with adjustable thermal magnetic release .Make:-L&T /Hager/Schenider/ABB/HPL

Supply and Fix , MCCB 100Amp, 415 V, 16 KA, 4 pole with adjustable thermal magnetic release .Make:-L&T /Hager/Schenider/ABB/HPL

Supply and Fix , MCCB 250Amp, 415 V,25 KA, 4 pole with adjustable thermal magnetic release .Make:-L&T /Hager/Schenider/ABB/HPL

Supply and Fix , Onload Changeover Switch 100 A, 4P 415 V Open Execution Type complete all as specified and as directed by engr in-charge .Make:-L&T /Hager/Schenider/ABB/HPL

Supply and Fix , Onload Changeover Switch 63 A, 4P 415 V Open Execution Type complete all as specified and as directed by engr in-charge .Make:-L&T /Hager/Schenider/ABB/HPL

Supply & fixing in replacement current transformer CT25/5A CL 1 5VA Spare suitable for APFC Panel complete all as specified and as directed by Make:- Neptune/Havells/L&T/Indo Asian

Supply & fixing in replacement current transformer CT50/5A CL 1 5VA Spare suitable for APFC Panel complete all as specified and as directed Make:- Neptune/Havells/L&T/Indo Asian

Supply & fixing in replacement power factor controller relay latest micro controller based tech with true RMS sensing alarm avilable , delay adjustment , LCD display range 08 steps , 7 segment LED display size 144 X 144mm Auxillary supply 90-550 VAC, NTC tempature sensor , power factor measurement range 0.8 lag to 0.8 le suitable for APFC Panel complete all as specified and as directed Make:- Neptune/Havells/L&T/Indo Asian

Supply & fixing in replacement super heavy duty cylindrical capicitos 5 KVAR, 3 Phase, 440 V , 50Hz suitable for APFC Panel complete all as specified and as directed Make:- Neptune/Havells/L&T/Indo Asian

Supply & fixing in replacement super heavy duty cylindrical capicitos 10 KVAR, 3 Phase, 440 V , 50Hz suitable for APFC Panel complete all as specified and as directed Make:- EPCOS/Neptune/Havells/L&T/Indo Asian

Supply & fixing in replacement super heavy duty cylindrical capicitos 15 KVAR, 3 Phase, 440 V , 50Hz suitable for APFC Panel complete all as specified and as directedMake:- EPCOS/Neptune/Havells/L&T/Indo Asian

Supply and fix in replacement capacitor duty Power contactor suitable for 5 KVAR capacitor panel ratings for APFC Panels complete all as specified and as directed Make:- Havells/L&T/Indo Asian

Supply and fix in replacement capacitor duty Power contactor suitable for 10 KVAR capacitor panel ratings for APFC Panels complete all as specified and as directed Make:- Havells/L&T/Indo Asian

Supply and fix in replacement capacitor duty Power contactor suitable for 15 KVAR capacitor panel ratings for APFC Panels complete all as specified and as directed Make:- Havells/L&T/Indo Asian

Supply and Fixing in replacement C Curve 3 Pole MCB 32 Amp, 50 Hz, 415 V with rupturing capacity 10 KA complete all as specified and as directed Make:- Havells/L&T/Indo Asian/Hager

Supply and Fixing in replacement C Curve 3 Pole MCB 40 Amp, 50 Hz, 415 V with rupturing capacity 10 KA complete all as specified and as directed . Make:- Havells/L&T/Indo Asian/Hager

Supply and fix in replacement wiring complete 4.0 Sqmm single core PVC insulated FR LS cable 1100 volts grade multistranded copper conductor cable with multistranded copper conductor cable , all as specified and directed by Engineer-in-charge. Make:- Havells/Finolex/Anchor/Plaza

R K ENTERPRISES