Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹27.8 LAccepted-AOC | 1 | Accepted-AOC lowest bid | |
| 2 | 2₹32.6 L+₹1.7 L (5.41%)Rejected-Finance | 2 | Rejected-Finance highest |
Tender Value
Refer Docs
EMD Value
₹32,000
Closing Date
30 Sept 2021, 4:00 pmClosed
Executive Engineer Electrical
Office of the Executive Engineer Electrical Division Travancore Devaswom Board Chengannur 689121
Sabarimala Devaswom-MnM Festival in 1197ME-Repair and replacement of damaged electrical accessories in the existing electrical installation to the temple structures and various buildings at Sabarimala
2021_TDB_440884_1
TDB/EEE/ET-02/21-22
Open Tender
Electrical Works
Item Rate
81 days
Sabarimala
Refer NIT
3 documents required · 3 mandatory
₹5,000
₹32,000
17 Apr 2025
22 Sept 2021
4 Oct 2021
22 Sept 2021
30 Sept 2021
22 Sept 2021
Amount
The work should be done as per the directions of department officials at site. All materials, accessories and appliances etc. are having IS specification and approved quality should be supplied/ used for the work.
APPENDIX-I Supply of Electrical materials at Sabarimala.
1.5 sq mm ISI marked FRLS PVC insulated single core copper conductor cable
2.5 sq mm ISI marked FRLS PVC insulated single core copper conductor cable
4.00 sq mm ISI marked FRLS PVC insulated single core copper conductor cable
20mm dia ISI marked ,PVC conduit
20 mm PVC bends
20 mm PVC couplers
20 mm PVC junction box, one way
20 mm PVC junction box, two way
Modular GI box for 2 module
Modular GI box for 3 module
Modular GI box for 4 module
Modular GI box for 6 module
Modular GI box for 8 module
Modular GI box for 12 module
Ceiling rose, 3 pin 5 A ISI mark
S.P. 5/6 amps, one way modular switch, ISI marked
S.P. 15/16 A, one way modular switch, ISI marked
3 pin 5/6 amps modular socket outlet, ISI marked
6 pin 15/16 A modular socket outlet, ISI marked
Stepped type Modular Fan regulator (2 module)
Modular blanking plate
Modular base & cover plate for 2 module
Modular base & cover plate for 3 module
Modular base & cover plate for 4 module
Modular base & cover plate for 6 module
Modular base & cover plate for 8 module
Modular base & cover plate for 12 module
S.P. 5/6 amps,one way switch, piano type ISI marked
3 pin 5/6 amps socket outlet, piano type ISI marked
bell push ,piano type
Brass pendant holder
PVC Batten/ Angle Holder
6 amps. to 32 amps. ratings, SP MCB, C curve,10KVA breaking capacity.
Single pole, blanking plate each
40 amps., 2 pole isolator
63 A, 2 pole isolator each
40 amps., 4 pole isolator
63 A, 4 pole isolator each
100 amps., 4 pole isolator
40 amps. rating, 2 pole RCCB, 100mA/300mA
63 A rating, 2 pole RCCB, 30mA
40 amps. rating, 4 pole RCCB, 100mA/300mA
63 amps. rating, 4 pole RCCB,100mA/300mA each
6 way, SPN, double door, MCB DB
14 way, SPN, double door, MCB DB
Sheet steel DP MCB enclosure
Sheet steel TP MCB enclosure
4 way (4+12), TPN, MCB DB, double door, horizontal type
4 way (4+12), TPN, vertical type, MCB DB, double door
GI saddles 19mm x 0.55 mm for conduit
GI saddles 25 mm x 0.90 mmm for conduit above 25 mm
GI saddle 20 mm x 3mm
1.0sqmm ISI marked FR LS PVC insulated single core copper conductor cable
48/0.20 sqmm three core ISI Marked FR LS PVC sheathed round copper conductor cable
80/0.20 mm sqmm three core ISI Marked FR LS PVC sheathed round copper conductor cable
6 A 3 pin plug top
16 A 3 pin plug top
2 module Moulded Plastic boxes
3 module Moulded Plastic boxes
4 module Moulded plastic boxes
6 module Moulded Plastic boxes
8 module Moulded Plastic boxes
DC operated remote controlled electric bell
T8 36 W FTL
Normal size 8W BC/ ES(LED)
1200mm,LED Tube
1x20 W LED box type tube fittings. The fittings shall be made from CRCA MS sheet of minimum thickness 0.50 mm nominal thickness inside & outside (including LED Tubes).
2x20 W LED box type tube fittings. The fittings shall be made from CRCA MS sheet of minimum thickness 0.50 mm nominal thickness inside & outside (including LED Tubes).
1200 mm sweep- 5 star rated Ceiling fan, complete with 300mm down rod, canopies, shackles and blades and resistance type regulator working on 230/240V single phase A/C . (White 6 Nos)
400 mm sweep Wall Mounting fan
300/305 mm sweep Light Duty Exhaust fan in metal frame working on 230 V A/C
2.5 mfd. Capacitor
40 A TP MCB isolator
63 A TP MCB isolator
Copper wire 0 to 14 SWG
adhesive pvc insulation tape
20 mm PVC Junction Box three way
20 mm PVC Junction Box four way
pvc grip
PVC Round block
70W LED Flood light output > 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor >0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing, acrylic cover complete with THD <10%, power factor >0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer)
120W LED Flood light output > 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor >0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing, acrylic cover complete with THD <10%, power factor >0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer)
70W LED Street light output > 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor >0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing, acrylic cover complete with THD <10%, power factor >0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer)
100W LED Street light output > 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor >0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing, acrylic cover complete with THD <10%, power factor >0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer)
Supplying GLS 60W clear bulb in the existing fitting as required
Supplying and 40W FT starter in the existing fitting as required(FSU-Bajaj)
Supplying and providing 1*36/40W copper ballast in the existing fitting as required(VPIT) (Bajaj/Crompton)
Supplying and providing 1*36/40W with electronic ballast in the existing fitting as required. 40W ELE CHOKE E-SAVER
Supply and providing resistance type regulator for 1200mm sweep ceiling fan and giving connection as required
Supply Aluminium Flat Wire 2.5 SERVICE WIRE
Supply Aluminium Flat Wire 4MM SERVICE WIRE
Supply MH LAMP 250W TUBULAR
supply 250W MH CHOKE BJOS
Supply 250W SV IGNATOR
Supply 33 MFD CAPACITOR
Supply conveyance installation testing and commissioning of prewired Strip light fluresent made out of CRCA sheet of minimum thickness 0.50mm power coated/store enameled suitable for 1x36x40w FTL with open construction (VPIT) copper chock starter holder lamp holder etc duly wired up to for use on 240V single phase AC supply and fluresent lamp etc directly on wall or ceiling with TW round block neatly painted to suit the fittings and giving connection with required length of 16/0.20mm 3core copper conductor flex confirming to relevant ISS and giving connection etc as required
Supply PEDESTAL FAN 07 MIDEA 400MM
Supply LED BULB .5W HAPPY POWER 1Y
Supply 6A one way bed switch
Supply 5 in one socket and switch20&10A 5in 1 combined unit 240V 50HZ
Supply Aluminium Flat Wire 6 MM SERVICE WIRE
APPENDIX-II Labour engaged for watching and maintenance to the existing electrical installation to the temple structures, various buildings and yard light installed in and around at Sabarimala.
Dismantling and removing the damaged accessories from the existing electrical installations and also stacking carefully.
Electrician
wire man helper
5nos of electricians should be engaged round the clock for fault attending around the temple premises and various locations including trekking paths, Pandithavalam etc. as per the directions of departmental officials at site (2 shift / day) for 80 days during the period from 01.11.2021 to 19.01.2022
5nos of Electrician /Day for 80days
Labor engaged for engaging store keeper 2nos electrician per day for 68 days during the period from 13.11.2021 to 19.01.2022.
D SURESH
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_627164.pdf
boq_comp_chart.xlsx
xlsx
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .