REPAIR AND MAINTENANCE OF STREET LIGHTS, POLES AND CONNECTED ACCESSORIES UNDER TECH AND NON TECH AREA UNDER GE(I)(CG) GOA

Amount

Excavation in trenches n.exc 1.5 m deep and n.exc 1.5 m wide and getting out in soft disintegrated rock/ laterite rock for taking up/relaying LT UG cable/ pipe complete all as specified and directed.

Returning filling in excavated earth work including spreading, levelling, watering and well ramming in layers n.exc 25cm thick in any strata complete all as specified and directed.

Removing excavated soil to a distance n.exc 50m, depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed.

Supply/ Lay dry river sand/ M sand in trenches for cable protection complete all as specified and directed. [Note :- Punned thickness only will be measured & Paid]

Supply and lay cable cover LV type 1 flate size 250mm x 150mm x 40mm for cable protection complete all as specified and directed.

Taking out LT UG cable of any type and size from trenches/ walls etc complete all as specified and directed.

Supply Lay, testing & commission UG cable XLPE insulated armoured heavy duty electric cable 1100 volt grade with stranded aluminium conductor cross sectional area 3.5/4 core AC supply of following size:-

(a) Cable under ground LT 25 Sqmm 4.0 core

(b) Cable under ground LT 16 Sqmm 4.0 core

M & L in replacement for GI pipe light grade laid in trenches for cable protection of size 50mm dia. complete all as specified and directed

S & F in replacement of Lugs of 16 Sqmm and 25 Sqmm complete all as specified and directed

M & L in repairs to LT street light pillar box by opening door hinges and taking rusted portion of door incl removing bends / dents and refixing the door with new hinges, handles, making good surfaces bolting etc and painting of LT pannels by duly cleaning the surface from dust and grease and applying one coat of synthetic enamel paint by using spray gun colour as directed by the Eng-in-Charge and lettering the LT pannels with black/white paint using stencils or making lettering by using stickering with minium size of letter to be of 5 cm complete all as specified and directed

Taking down the burnt MCB from the street light pole, junction boxes, supply & fix, test & commissioning of MCB 6 to 16 Amps/10KA, Single Pole complete all as specified and directed

Taking down the burnt MCCBs from the LT panels/feeder pillar boxes, supply & fix , test & commissioning of MCCB 63 Amps/10KA, 4 Pole complete all as specified and directed

Preparation of surfaces RCC Pole of 9 mtr by scraping with emry paper and making free from rust, dust and any foreign material and apply two coats of ceament based weather proof distemper including letter writing on poles such as Pole No and source point of electric supply with black paint and flurcent paint in circumference of poles / mast towers of various heights complete all as specified and directed.

Taking down street light fitting from pole for repairing / replacement / cleaning of any Wattage, including removing dead insect, dust and refixing again to same location complete all as specified and directed [Note:- Replacement of accessories like driver and LA protection device will be measured & paid seperately]

S & F in repairs PVC FRP junction box with including 01 No MCB SP of 6 Amp fixed on existing pole with clamp, nut & bolt connections including removing dismantling of unserviceable pole box and MCB complete all as specified and directed.

S & F in repairs FRLS PVC insulated copper conductor 2 x 2.5 Sqmm + 1x 2.5 Sqmm earth wire in PVC rigid conduit from fitting through the bracket to DB sintex box complete all as specified and directed. [Note: 2 run of 2.5sqmm, 1 run of 1.5 sqmm and 20mm PVC conduit will be measured as one length]

Taking down unserviceable indication lamp and supply, fix and testing indication lamp (LED type) with showing red, yellow and green in colour of 22.5mm dia monitor on LT panel board suitable for 240V AC supply complete all as specified and directed

M & L for painting of steel/GI tubular electric poles 9.0 mtr/7.0 Mtr long and with two coats of aluminium paint over a coat of red oxide primer after preparation of surface approved colour and quality including marking and painting with black & yellow colours strips with coping level and making of Pole Number complete all as specified and directed

S & F in repairs LED Street lights 70W new generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover havint TOP OPENING seperate driver compartment with IP66 protection and impact resistance of IK07 with 10KV Built-in Surge Protection Device and giving electric connection and testing complete all as specified and directed.

S & F in repairs LED Flood light 120 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and directed

S & F in repairs LED Flood light 150 Watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and directed

S & F in repairs LED Driver unit for LED Street light Luminaire 70 W complete all as specified and directed

S & F in repair LED Driver unit for LED Flood light Luminaire 120 W complete all as specified and directed

S & F in repairs LED Driver unit for LED Flood light Luminaire 150 W complete all as specified and directed

S & F in repairs Nature time switch using infrared sensor technolgy based automatic street light control panel enclosed in SMC boxes with one No MCB TPN 32 Amps, with Contactor 32 Amp 3 Pole connector 4 way 32 Amps including fixing clamps, nut bolts etc by taking down the old damaged timer complete all as specified and directed

S & F Contactor in replacement, 4 pole, 415V, 40A cap, MCX , 2 NO+2 NC utilsed for heavy duty by taking down the old perished / deteriorated contactor aganist repairs complete all as specified and directed

S & F in replacement Cable jointing kit for 1.1 KV (Earthed) grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 4.0 core XLPE armoured aluminium conductor cable of size 16 Sqmm to 25 Sqmm complete all as specified and directed

S & F in repairs Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts and screws as specified type 410 SP-22 (8.5 metres long) complete all as specified and directed. [Note- Excavation & earth work, and concrete will be measured and paid separately under relevant items]

M & L Plain Cement Concrete type C-2, 1:3:6 (using 40mm graded aggregate) as in Foundations filling and mass concrete complete all as specified and directed

M & L for Plain Cement concrete type B1, 1:2:4 (using 20mm graded stone aggregate) for pole coping including necessary formwork complete all as specified and directed

U k Enterprises (BID ID -3084647)

SHIVANI ENTERPRISES (BID ID -3081286)

Shree Ram Enterprises (BID ID -3086165)

Shree Ayyappa Engineering (BID ID -3087149)

star freeze service (BID ID -3085377)

Shine Enterprises (BID ID -3083774)

NATIONAL ENGINEERING CORPORATION (BID ID -3087163)