PROVIDING, INSTALLING, TESTING AND COMMISSIONING OF POWER SUPPLY WITH HT LINE OTHER ALLIED WORKS (FROM JOSHI NAGAR BELGAON KHODKE LAYOUT TO WTP) OF SELOO WATER SUPPLY SCHEME UNDER AMRUT 2.0 PROGRAM.

Subwork No. 1: 11 KV 3 C 185 mm 2 XLPE under ground Cable.

XLPE Cable 11 KV 3C/185 sq.mm Providing, errecting, testing and commissioning LT XLPE Armoured Cable of 3 core & 185 Sqmm etc complete.

RCC Pipe 150mm 2M Provide and fixing Half Round Cement Pipe.

Half round Cement pipe Provide and fixing Half Round Cement Pipe.

11 KV Heat Shrinkable Straight through jointing Kit For 3C *185 sqmm Providing and fixing 11 KV Heat Shrinkable straight Through Jointing Kit suitable For 3Core x 185 Sqmm XLPE cable.

11 KV Heat Shrinkable Outdoor Termination Kit For 3C *185 Sqmm Providing and fixing 11 KV Heat Shrinkable Outdoor Termination Kit suitable For 3Core x 185 Sqmm XLPE cable.

Sand Providing sand cushioning for underground cable.

Misc for XLPE U/G cable Providing all miscellaneous materials required for XLPE underground cable work.

Subwork No. 2: 11 KV FEEDER BAY WITH GANTRY STRUCTURE & PT 2.1L.As. 11 KV (Gapless Type ) With Disconector

33 KV Isolators with EB (800 A)

33 KV Isolators without EB (800 Amp.)

11 KV VCB 400 A Outdoor

11 KV CT 400-200/5-5 Outdoor

C $ R Panel For 11 KV Outgoing Feeder OD

11 KV Feeder bay (Structure, Foundation, Bus barmaterial, Cable, Earthing Materials & Painting ) 2.71 .STRUCTURE 2.71.1 Structure for 11 KV L.A

Structure for 11 KV CT

G.I Gantry Structure

G.I Nut Bolts

Welding Rods

Foundation Civil Work 2.72.1 Foundation for 11 KV Isolator

Foundation for 11 KV Isolator without EB

Foundation for 11 KV Ligthing Arrestor

Foundation for 11 KV C. Ts

Foundation for 11 KV Breaker

Foundation for Gantry Structures

BUS-BAR MATERIAL 2.73.1 AAAC 232 mm2

T-Connector For 200 sq mm conductor (Compression type)

Breaker Clamps

Clamps For Isolator

Clamps For CTs

Disc Insulators 11 KV 70 KN

Strain Hardware for AAAC 232 sq. mm

CONTROL CABLE 2.74.1 a Armoured Copper control cable 19C X 2.5 Sq mm

Armoured Copper control cable 2Cx2.5 sq.mm.

Armoured Copper control cable 2C X 4 Sq mm

Cable Trays 2.5 Mtr. X 6" W

Cable Glands, rerules and tape. Etc.

Angle for fixing trays 50x50x6mm

Half round cement pipe (150mm X 1mtr)

EARTHING WORK 2.75.1 M.S Flat (50X10) mm

M.S Flat (25X6) mm

Earthing Set H.T of C.I Pipe 150mm m Mtr

Welding Rods

Hiring of Welding Machine

Brick & Masonary Work For Earthing Pit

PAINTING OF STRUCTURES 2.76.1 Red Oxide Paint for 2 coats

Alluminium Paint For 1 coat

Marshalling Box

All other relevenat items required for completion of this subwork

Subwork No. 3: DOUBLE POLE STRUCTURE (Cut Point) OF- 11KV LINE USING 11M LONG RSJ POLE 3.1 RSJ 116X100, 11 m long Providing, errecting, testing and commissioning Rolled steel joint ( Girder) pole 100 x 116 mm ( Wt. 23 Kg/Mtr.)and 11 mtr. long complete erected in provided CC foundation & muffing square or round etc complete.

RSJ 116X100, 10m long For stud

M.S Flats (50X10mm) MS work for flats(50x6)mm with painting, 2 coats of red oxide & 1 coat of Aluminium Paint

MS Channel 100 x50x6 mm MS work for channel (100x50x6)mm with painting, 2 coats of red oxide & 1 coat of Aluminium Paint

MS Channel 75x40x6 mm Providing & erecting bracket for guarding, made from channel iron 1600mm in length & 75x40x6mm erected on pole etc complete.( wt of channel 7.14kg/mt)

MS angle 50x50x6 mm MS work for angles(50x50x6)mm with painting, 2 coats of red oxide & 1 coat of Aluminium Paint

Strain Hardware For Dogo 0.1 or Equ AAAC.

Disc Insulator 11KV 70 KN Providing, errecting, testing and commissioning porecelain disc type insulator suitable for 11 KV H.T. line with hardware fitting etc complete.

11 KV Pin Insulator with GI Pins Providing, errecting, testing and commissioning porecelain pin type insulator with G.I. pins suitable for 11 KV H.T. line with hardware fitting etc complete .

H.T Stay Set

G.I Stay Wire 7/4mm (8 SWG) Providing, errecting, testing and commissioning H.T. Stay set for poles with G. I. stay wire 7/8 SWG etc

Earthing Sets H.T Providing, errecting, testing and commissioning Pipe/Rod type earthing etc complete.

G.I Wire 8 SWG/6 SWG Supplying and erecting G. I. Earth Wire of high purity of different sizes used for earthing or any other purposes on wall with necessary G. I. Clamps fixed on wall/cable/ conduit with screws in an approved manner.

G.I Barbed Wire 'A' type Providing, errecting, testing and commissioning Barbured wire two ply with 12SWG ply &12 SWG barb for anticlimbing devices etc complete.

Danger Board in yard. Providing, errecting, testing and commissioning Enamelled iron G. I. Danger Board etc complete.

Black Bituminus Paint

Red Oxide Paint for 2 coats

Aluminium Paint for 1 coat

G.I Nut Bolt

Concreting ration 1:3:6

Sundries Providing, errecting, testing and commissioning Sundry Material as required of the time of execution work etc complete.

11 KV A B Switch 400 A Providing, errecting, testing and commissioning 11kVA.B. Switch 400 Amp with 3 post pin type insulator per phase, mounted in horizontal or vertical position with necessary channels on rovided cross arm with adequate length of "C" class G.I. pipe for operating handle erected on extended square shaft. The operating handle provided with lock and key at suitable height from ground level with necessary clamp.etc complete.

H.D.P.E Pipe 150mm Withspaces

11 KV Lighting Arrestor ( Station type )

Subwork No. 4: SINGLE CIRCUIT PIN TYPE WITH 55 SQ.MM AAAC LINE OM 100X116 MM 11 MTR RSJ 4.1 11 KV Guarding channel MS 75x40x6

M.S Flats (50X10mm)

AAAC 55 mm2

Sundries Providing, errecting, testing and commissioning Sundry Material as required of the time of execution work etc complete.

Subwork No. 5: HDD Bore For Road Crossing Cable Laying work. 5.1Providing, Laying and Jointing of suitable dia HDPE pipe (PN 6 Class-PE 80 grade: IS 14333) to correct grade and alignment above 5m upto 8m depth including boring. Pilot inclined drilling from existing ground level upto required depth (invert level) on rig side of proposed HT cable (i.e. entry side) and Final inclined boring from R3- SE-exisitng ground level upto required depth (invert level) or vice versa on pipe side (i.e. exit side) of proposed HT cable using Horizontal Directional Drilling method in any type of ground including soft soil, mixed ground and soft/hard rock.

Subwork No. 6: SERVICE CONNECTION MATERIAL CHARGES 6.1 11 KV Metering cubicle of CT ratio 25/5 Amp, Accuracy class-0.5s Burden- 10 VA Single Core, Single Ratio & PTR 11000V /…Class 0.5,/ Burden 50 VA

XLPE Cable 11KV, 3C/ 185 mm. sq Supply and laying of 11 KV XLPE Cable, 3 Core x 185 sq.mm.

11 KV Cable Jointing Kit Outdoor Type

12 KV Cable Jointing Kit Indoor Type

Copper Earting Of metering cubicle

RCC half round pipe (1mtr) Provide and fixing Half Round Cement Pipe

GI pipe 6" diameter

Foundation for metering cubicle

Concreting work for cable trench

Sundries

Subwork No. 7: Erection cost for subwork 1 to 6 7.1 Erection, testing etc. complete work of for subwork 1 to 6 including all labour as per specification and directed by engineer in charge.

Subwork No. 8: TRANSFORMER 11 KV/0.433V,160 KVA 8.1 Supplying, installing, testing & commissioning of 3 phase, 11/0.433 kV, 50 Hz.,160 kVA, Mineral oil immersed and naturally cooled outdoor type, ONAN, copper wound Non-sealed transformer, delta/star connected with additional neutral brought out on load side, temperature rise should not exceed 40℃ by thermometer in oil and 45℃ by the resistance method in winding at full load rating, using type A winding insulation (kraft paper) , with standard accessories complete with test certificate with losses below 475 Watts at 50% load, 1650 Watts at 100% load as per IS:1180 (part 1) : 2014, and Included RSJ Ploe, isolator switch, Lighting arrestor, DO fuse, AB swich and transformer foundation and necessary earthing of transformer. necessary permissions of Electrical Inspector, as per specification no SS- TR-NSL.