CWE BLY/GE(W)/40 OF 2024-25 SPECIAL REPAIRS RE-SURFACING OF BAKSHI PARADE GROUND OF JRC AND PROVN OF LINK ROAD TO IWTS TRG SIMULATOR IN DOGRAI COY TRG AREA OF JRC UNDER GE (WEST) BAREILLY

Amount

M&L for repair to pot holes any depth, not exc 1 Sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal) and making good by applying tack coat with bituminous primer VG-10 @ 5 Kg per 10 Sq m, putting in premix bituminious macadam, well rammed and sealed with premixed sand seal coat (9.8 kg of binder with 0.09 Cum of stone chipping, 6.3mm size), again well rammed (including supply of premixed macadam, binder and chipping) depth of potholes not exc 30 mm complete all as specified and directed. Note: Pot holes shall be marked and checked by Engr-in-Charge for 100% quantity before commencement of work and shall also be entered in MB with reference to permanent objects before starting carpeting work.

M&L for Preparing of black top bituminous surfaces by brushing with brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with air pressure through air jet using air compressor to remove all loose dirt etc incl removing mud etc to a distance minimum 1.50 m from edge of road and applying evenly a tack coat of bituminous primer using paving bitumen (VG-10) at the rate of 5 Kg per 10 Sqm of road surface by sprayer operated hot pressure mechanisum, supplying, laying, spreading 40 mm consolidated thickness of semi dense asphaltic bituminous concrete carpet (VG-30) with 0.406 cum crushed and graded coarse aggregates with design mix formula with bitumen not less than 6% binder content incl using cement as in filler of minimum 2% using paver with mechanical paver all as specified in clause device for automatic leveling and profile control within the specified tolerance as mentioned in SSR Part-I , rolled with 8 to 10 tone powar Roller to uniform smooth surface and consolidated to required camber and gradient with power roller for uniform smooth surface complete all as specified and directed.

Supplying, laying, spreading upto 75mm or less consolidated thickness of premix bituminous macadam carpet filling in depression (using 20mm graded stone aggregate) in single layer using mechanical paver using bituminous binder (VG-30) at the rate 4% by weight of total mix, laid/rolled and compacted/consolidated to required camber and gradient with 8 to 10 tone power roller to a uniform smooth surface complete all as specified and directed.

M&L for applying evenly a priming /tack coat with paving bituminous VG-10 grade at 5 Kg/10 Sqm complete all as specified and directed.

M&L for scarifying or picking gravelled,macadam or bituminous macadam surfaces in area exc 400 sqm, n.exc 50mm deep complete all as specified and directed.

Material and labour for painting lines, dashes, arrows letter, marking etc of 3mm thick film on new surface or previously treated road surface with hot applied retro-reflective thermoplastic exc 10 cm wide n exc 15cm wide road marking paint (white/golden/yellow) conforming to MORTH (Clause 803.4) all as specified with 8% glass beads using special applicator machine with heating arrangement upto 160°C including cleaning and drying the existing road surfaces to ensure dust, oil, grease and moisture free surfaces before applying the paint complete all as specified and directed.

Excavation over areas n.exc.1.5m deep and getting out in soft/loose soil complete all as specified and directed.

Removing excavated material to a distance n.exc. 50m and depositing where directed at a level n.exc. 1.5m above the starting point complete all as specified and directed.

Rolling and consolidation of formation surface in cutting incl watering with 8 to 12 tonne power road roller complete all as specified and directed.

M&L for soiling (or sub grade) 150 mm thick spread thickness in two layers of 100mm each with broken boulders or quarried stone 63mm nominal size, interstices filled, surface formed and rolled and consolidated with 8 to 12 tonne power to required gradient and camber complete all as specified and directed.

M&L for 150mm thick (consolidated thickness) WMM in 2 layers of 75mm each with granite, trap or basalt coarse aggregate of grading 2 (63 to 40mm size) spread, rolled and consolid-ated with 8 to 12 tonne power roller to req gradient & camber complete all as specified and directed.

M&L for preparing surfaces by brushing with wire brushes for removing caked mud, etc., sweeping with brooms and finally fanning clear surface with gunny bags and applying priming/tack coat with bituminous primer at 10kg/10 sqm using paving bitumen complete all as specified and directed.

M&L for premix BM 75 mm(consolidated thickness) thick using binder content @ 4.50% paving bitumen of any penetration laid/rolled compacted to req gradient & camber with 8 to 10 Tonne power roller complete all as specified and directed.

Road side berms 150 mm thick (spread thick-ness) on sides of road using morrum/red bajri incl spreading, leveling, watering, well ramming with hand roller 0.5 tonne cap finishing to req size, gradient & camber complete all as specified and directed.

M & L for continuous brick edging with fly ash brick of old bricks, width equal to the width of the brick, laid dry, on end vertically complete all as specified and directed.

S&F delineator 1200mm long made of 2 mm thick steel sheet rectangular OD size 75 x 100mm. Bottom plate 2mm thick of size 150 x 150 mm for firm grip welded to base. Top end closed with 2mm steel sheet. At top on both sides diamond grade cube corner micro white reflector of size 75 x 125mm laminated in 2mm deep cavity to make it scratch resistant. Post to have two bands all around of white/yellow/red reflective sheet of width 225mm by keeping black coat as bands for greater night visibility. All coated with heat process and baked to 120°C or powder coated to make all weather resistant and fixing in PCC(1:2:4) with size of block 150mm x 150mm x300mm deep including required excavation and earthwork complete all as specified and directed. Note: The rate of PCC and earth work is included in this item and nothing shall be paid extra.

S&F Cat eye,Solar reflective type of metal body alloy of size 110mmx128mmx30mm of red / yellow / white with PAMA striplens reflector of Model -DA 971 fixed with 100 gm epoxy mixture and placing the cats eye without applying excessive pressure and fixed as per manufacturers instructions complete all as specified and directed.

S&F for two way reflective Solar road studs (100% water proofing design according to IP-65) of dimensions 125mm x 125mm x 25mm (shank 65 mm) of high efficiency mono-crystalline solar panel 2.4V/0.30 Watt, one Ni-Mh of Ni-cd rechargeable battery (1.2V /1600MA), six super bright LEDs with 10000 to 18000 mcd (Millicandela) , view distance upto 1000 meters, flash rate 2 Hz and bearable weight of solar studs (10 Tone approx) with impact resistance aluminium alloy body with yellow/ red/ white/ green reflective panels and fixing the same on road surface by applying approximately 100 gm epoxy mixture and placing the cats eye without applying excessive pressure and fixed with 12mm dia and 120mm long zinc plated steel nail at the centre of cats eye complete all as specified and directed.

M/s J P Bhatia (BID ID -3132886)