Construction of Community hall near staff quarter of Primary School at Village Raydi. Tal.Jamkandorana Dist. Rajkot

Name of Work:- Construction of Community hall near staff quarter of Primary School at Village Raydi.

Tal.Jamkandorana Dist. Rajkot

Taluka:- Jamkandorana Rajkot

Bill of Quantity

Item Unit Tender Total Amount

Item Unit Tender Total Amount

No. Description of Item (with brief specification and reference to book of Quantity Figure according to

specifications) Estimated

1 Excavation for foundation up to 1.5 MDepth including sorting 13.10 Cum 164.82

out and stacking of useful materials and disposing of the

excavated stuff up to 50 meter lead (B) Dense or Hard soil

2 Excavation for foundation up to 1.5 MDepth including sorting 15.26 Cum 279.81

out and stacking of useful materials and disposing of the

excavated stuff up to 50 meter lead (C) Hard Murrum.

3 Providing and laying cement concrete 1:4:8 (1-cement : 4- 8.57 Cum 2940.90

coarse sand : 8-hand broken stone aggreate 40mm nominal

size) and curing complete excludnig cost of formwork in (A)

foundation and plinth

4 White Stone Bela mesonry block in course in superstructure 21.33 Cum 5082.46

with stone of approved quality in Lime Mortar 1:6 (1-Cement :

6- course sand) including packing the joints etc. complete.

5 Filling available excavated earth (excluding rock) in trenches. 28.36 Cum 137.47

plinth, sides of foundations etc. in layers not exceeding 20 cm.

in depth consolidating each disposited layer by ramming and

6 Providing and laying cement concrete work 1:2:4 (1- Cement : 6.00 Cum 4060.93

2- Coarse sand : 4- graded stone aggregates 20 mm nominal

size) and curing complete excluding cost of formwork and

reinforcement for reinforced concrete work in (A)

Foundations, footings, Base or columns and Mass concrete

7 Providing and laying ordinary cement concrete 1:2:4 (1- 2.70 Cum 10658.15

Cement 2- coarse sand : 4- graded stone aggregates 20 mm

nominal size) and finishing smooth with,curing etc. complete

including the cost of formwork but excluding the cost of

reinforcement for R.C.C work in (B) COLUMNS: (ii) Having

cross-sectional area more than

0.08 Sq.M and upto 0.18 Sq.M

8 Providing and laying ordinary cement concrete 1:2:4 (1- 0.98 Cum 10219.39

Cement 2- coarse sand : 4- graded stone aggregates 20 mm

nominal size) for R.C.C lintel including finishing smooth

with,curing etc. complete including the cost of formwork but

excluding the cost of reinforcement.

9 Providing and laying ordinary cement concrete 1:2:4 (1- 9.18 Cum 6578.06

Cement 2- coarse sand : 4- graded stone aggregates 20 mm

nominal size) and finishing smooth with,curing etc. complete

including the cost of formwork but excluding the cost of

reinforcement for R.C.C work in (A) BEAMS :(iii) Having

cross-sectional area more than 0.12Sq.M and upto 0.18 Sq.M

10 Providing and laying ordinary cement concrete 1:2:4 (1- 10.08 Cum 7454.03

Cement 2- coarse sand : 4- graded stone aggregates 20 mm

nominal size) exposed work with curing etc. complete

including the cost of formwork but excluding the cost of

reinforsement for R.C.C work in (iii) Slabs having more than

10 cm and upto 13 cm. thickness

11 Providing TMT Bar FE 500D reinforcement for R.C.C. work 2859.00 Kg 77.28

including bending, binding and placing in position complete

upto floor two level

Item Unit Tender Total Amount

Item Unit Tender Total Amount

No. Description of Item (with brief specification and reference to book of Quantity Figure according to

specifications) Estimated

12 Providing and fixing in position M.S.Angle 40mm x 40mm x 3.15 Sqmt 3082.19

6mm frame for doors of 25 x 25 x 5mm angle for shutter frame

and 16 gauge M.S. sheet welded to shutter frame and 6 mm

square bar for grill as per the approved drawing and design

and including 3 coats of oil paint including a prime coat of red

oxied paint and all necessary fitting, fixture locking

arragnement etc. complete

13 Providing and fixing in position M.S.Angle 35mm x 35mm x 16.20 Sqmt 3405.57

6mm frame for windows of 25 x 25 x 5mm angle for shutter

frame and 16 gauge M.S. sheet welded to shutter frame and

mm square bar for grill as per the approved drawing and

design and including 3 coats of oil paint including a prime coat

of red oxied paint and all necessary fitting, fixture locking

arragnement etc. complete

14 P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm 74.50 Sqmt 1546.84

(average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand)

on new surface or fixing on existing flooring by adhesive

material including dismentaling of existing flooring and

jointed with color cement slurry including finised with flush

pointing & cleaning the surface etc. complete for light shade

15 Providing 15mm thick cement plaster in single coat on Rough 89.33 Sqmt 168.87

(Similar)side of single or half brick walls for interior plastering

upto floor two level and finished even and smooth in (ii)

Cement mortar 1:4 (1-cement :4-sand)

16 Providing 20mm thick cement plaster in single coat on single 151.33 Sqmt 213.48

or half brick walls for interior plastering upto floor two level

and finished even and smooth in (ii) Cement mortar 1:4 (1-

cement :4-sand)

17 Providing 10mm thick cement plaster in single coat on 95.52 Sqmt 141.91

brick/concrete walls for interior plastering upto floor two level

and finished even and smooth in (i)Cement mortar 1:3 (1-

18 Providing and laying broken chine mosaic flooring for terrace 70.00 Sqmt 779.69

using 12 mm to 20 mm broken pieces of glazed tiles to be laid

over cement mortar 1:3 to plain or slope and to be tempered to

bring mortar creme out upto surface using white cement

including rounding off junctions and extending them upto

cm along the wall,clearing with water and oxalic acid etc. as

19 Wall painting (two coats) with plastic emulsion paint of 184.85 Sqmt 88.38

approved brand and manufacture on undecorated wall surface

to give an even shade including throughly brushing the surface

free from mortar droppings and other foreign matter and sand

papered smooth.

20 Finishing wall with water proofing cement paint of on wall 151.33 Sqmt 63.69

surfaces (Two coats) to give an approved brand and

manufacture and of required shape even shade after thoroughly

brushing the surface to remove all dirt and remains of loose

powered materials.

21 Providing and fixing Number plate of Marble plate stone of 1.00 No. 306.14

required size set in C.M. 1:4 including finishing and engeaving

letters etc. completes.

Rupees Eight Lakhs Eighty Five Thousand Four Hundred Eighty Nine & Paise Thirteen Only

Item Unit Tender Total Amount

Item Unit Tender Total Amount

No. Description of Item (with brief specification and reference to book of Quantity Figure according to

specifications) Estimated

I/we am / are willing to carry out the work at % above / below the estimated rates (percentage should be written in

words and figures % above / below) the estimated rates as mentioned above. Amount of My / Our tender works

1) Estimated amount put to Tender : Rs. 8,85,489.13 1) Estimated amount put to Tender : Rs.

2) Deduct % below Rs. . 2) Add % Above Rs. .

3) Net Amount of Tender Rs. . 3) Total Amount of Tender Rs.

3) Net Amount of Tender Rs. . 3) Total Amount of Tender Rs.

4) In words Rs. . 4) In words Rs.

* (Please strike out whichever is not applicable)

1) The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which

no extra payment shall be made.

2) The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3) GST and Income tax TDS will be deducted at a source while making payments of bills

4) In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement

Consumption/16/C, Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the

cost of difference of cement consumption have been deducted from the rate of original item at the rate of input rate mentioned in all

Deputy Executive Engineer

R & B (P) Sub Division

Signature of the Executive Engineer :