BUILDING WORK (Construction of New Maternity Home at CHC Garbada Ta. Garbada Dist Dahod)

Name of Work :- Construction of New Maternity Home at CHC Garbada Ta. Garbada Dist Dahod

Memorandom showing items of works to be carried out

Item Quantities Items Description Estimated Rates Unit Total amount

Item Quantities Items Description Estimated Rates Unit Total amount

No. estimated but may In Figures In Words According to

be more or less Estimated

1 318.30 Cum. Excavation for foundation upto 1.50 mt depth including sorting out and stracking of 160.89 Rupees One Hundred Cum.

usefulmaterials and disposing the excaveted stuff upto 50 mt lead (B) Dense or Hard Sixty And Paise Eighty

2 663.30 Cum. Excavation for foundation upto 1.50 mt depth including sorting out and stracking of 275.33 Rupees Two Hundred Cum.

usefulmaterials and disposing the excaveted stuff upto 50 mt lead (C ) Hard Murrum Seventy Five And Paise

Thirty Three Only

3 223.40 Cum. Excavation for foundation upto for depth from 1.5 M. to 3.0 M. including sorting out 284.69 Rupees Two Hundred Cum.

and stracking of usefulmaterials and disposing the excaveted stuff upto 50 mt lead Eighty Four And Paise

(D) Soft Rock not requiring Blasting Sixty Nine Only

4 183.00 Cum. Excavation for foundation upto for depth from 1.5 M. to 3.0 M. including sorting out 294.05 Rupees Two Hundred Cum.

and stracking of usefulmaterials and disposing the excaveted stuff upto 50 mt lead Ninety Four And Paise

(C) Hard Murrum Five Only

5 358.22 Cum. Providing and laying cement concrete 1:4:8 (1 cement : 4 coarse sand : 8 hand 2679.92 Rupees Two Thousand Cum.

broken stone aggregate 40mm nominal size) and curing comoplete excluding cost of Six Hundred Seventy

form work in (a) foundation and plinth Nine And Paise Ninety

6 182.90 Cum. Providing and laying controlled cement concrete M250 work with curing etc. complete 4623.42 Rupees Four Thousand Cum.

including the cost of form work but excluding cost of Reinforcement for RCC work in Six Hundred Twenty

(A) Foundation footing base of columns and mass concrete. Three And Paise Forty

7 21.00 Cum. Providing and laying controlled cement concrete M250 work with curing etc. complete 6818.05 Rupees Six Thousand Cum.

including the cost of form work but excluding cost of Reinforcement for RCC work in Eight Hundred Eighteen

Column upto Plinth Level. And Paise Five Only

8 132.35 Cum. Providing and laying controlled cement concrete M250 work with curing etc. complete 6729.74 Rupees Six Thousand Cum.

including the cost of from workbut excluding cost of Reinforcement for RCC work in ( Seven Hundred Twenty

C) For Plinth Beam , Tie Beams at Ground Levels Nine And Paise Seventy

DTP Maternity Home CHC Garbada 1 of

Item Quantities Items Description Estimated Rates Unit Total amount

Item Quantities Items Description Estimated Rates Unit Total amount

No. estimated but may In Figures In Words According to

be more or less Estimated

9 292.40 Cum. P & L Brick work using common burnt clay Building bricks having crushing strength 3853.23 Rupees Three Thousand Cum.

not less than 35 Kg/ Sq.Cm. In foundation and plinth in cement mortar 1:6 (1 Cement: Eight Hundred Fifty

6-Fine sand) with curing etc.comp. (b) Conventional Three And Paise Twenty

10 731.20 Cum. Filling available excavated earth (excaluding rock ) in trenches. Plinth, sides of 137.47 Rupees One Hundred Cum.

foundation etc. in layers not exceeding 20cm. in depth consolidating each disposited Thirty Seven And Paise

layer by rammng and watering . Forty Seven Only

11 1357.15 Cum. Filling in foundation and plinth with murrum or selected soil in layers of 20 cm. 273.07 Rupees Two Hundred Cum.

thickness including watering, ramming and consolidating etc. Complete. Seventy Three And

Paise Seven Only

12 85.00 Cum. Providing and Laying ordinary cement concrete 1:2:4 (1- Cement 2- coarse sand : 4- 3728.86 Rupees Three Thousand Cum.

graded stone aggregates 20 mm nominal size) and finishing smooth with curing etc. Seven Hundred Twenty

complete including the cost of formwork but excluding the cost of reinforsement for Eight And Paise Eighty

R.C.C work in (floor slab,road etc.) Six Only

13 841.00 Sqm. Applying general insecticide pest control treatment to floors, cupboards etc including 54.39 Rupees Fifty Four And Sqm.

labour material etc. complete. Using Heptachloride 20 EC. As Per 6113_pests Paise Thirty Nine Only

Consentration Weight 0.50 percent is recommended one litre chemical emulsion

dillute with 39 liter of water will give. Total dillute concrentration will be 40 litre

inclusive of one litre chemical emulsion appication 0.5 Litre chemical / Sqm of surface

is recommended as per I.S

14 39.10 Cum. Providing and laying controlled cement concrete M200 work with curing etc. complete 7859.89 Rupees Seven Cum.

including the cost of form work but excluding cost of Reinforcement for RCC work in Thousand Eight Hundred

Column (for all floor) Fifty Nine And Paise

Eighty Nine Only

15 232.90 Cum. Brick work using common burnt clay building bricks having crushing strength not less 4141.66 Rupees Four Thousand Cum.

than 35 Kg/ Sq.Cm. In Super Structure above plinth level up to floor two level in One Hundred Forty One

cement mortar 1:6 (1 Cement: 6-Fine sand) with curing etc. (b)Conventional. for G.F. And Paise Sixty Six Only

16 15.65 Cum. Providing and laying controlled cement concrete M-200 with curing etc. complete 7744.19 Rupees Seven Cum.

including the cost of form work but excluding the cost of reinforcement for R.C.C. work Thousand Seven

in Lintel. (for all floor) Hundred Forty Four And

Paise Nineteen Only

DTP Maternity Home CHC Garbada 2 of

Item Quantities Items Description Estimated Rates Unit Total amount

Item Quantities Items Description Estimated Rates Unit Total amount

No. estimated but may In Figures In Words According to

be more or less Estimated

17 81.00 Cum. Providing and laying controlled cement concrete M-200 with curing etc. complete 6934.16 Rupees Six Thousand Cum.

including the cost of form work but excluding the cost of reinforcement for R.C.C. work Nine Hundred Thirty

in Beam for up to floor two level. (for all floor) (b) beam Four And Paise Sixteen

18 4.00 Cum. Providing and laying controlled cement concrete M-200 with curing etc. complete 6288.57 Rupees Six Thousand Cum.

including the cost of form work but excluding the cost of reinforcement for R.C.C. work Two Hundred Eighty

in Chajja. (for all floor) Eight And Paise Fifty

19 138.00 Cum. Providing and laying controlled cement concrete M-200 finishing with curing complete 7084.27 Rupees Seven Cum.

including the cost of form work but excluding the cost of reinforcement for R.C.C. work Thousand Eighty Four

in Slab upto floor two level GF And Paise Twenty Seven

20 4.05 Cum. Providing and laying controlled cement concrete M-200 finishing with curing complete 7122.93 Rupees Seven Cum.

including the cost of form work but excluding the cost of reinforcement for R.C.C. work Thousand One Hundred

in Slab upto floor two level FF Twenty Two And Paise

Ninety Three Only

21 4.00 Cum. Providing and laying controlled cement concrete M-200 with curing etc. complete 8257.94 Rupees Eight Thousand Cum.

including the cost of form work but excluding the cost of reinforcement for R.C.C. work Two Hundred Fifty

up to floor two level (for all floor)(A) Stair case Seven And Paise Ninety

22 69574.75 Kg. Providing TMT Bar FE 500/500D reinforcement for R.C.C. work including Cutting, 77.29 Rupees Seventy Seven Kg.

bending, binding and placing in position complete upto floor two level (For all floor) And Paise Twenty Nine

23 46.90 Cum. Brick work using common burnt clay Building bricks having crushing strength not less 4180.17 Rupees Four Thousand Cum.

than 35 Kg/ Sq.Cm. In Super Structure above plinth level up to floor two level in One Hundred Eighty And

cement mortar 1:6 (1 Cement: 6-Fine sand) with curing etc. (b)Conventional. for F.F. Paise Seventeen Only

and above all floor

24 40.20 Sqm. Providing & Fixing UPVC Single Door Partly Glazed /Fully Glazed of Fenesta,LG 6812.45 Rupees Six Thousand Sqm.

Hausys,Kömmerling Veka as per Instruction of Architect .Doorwith Frame section Eight Hundred Twelve

58mmx60mm and door shutter of section size 102mmx60mm with Glass 5mm Thick And Paise Forty Five

including lock and aldrop with all necessary fittings and installation and filling gaps Only

with Silicon etc complete

25 31.20 Sqm. Providing & Fixing UPVC Double DoorPartly Glazed /Fully Glazed of Fenesta,LG 7190.19 Rupees Seven Sqm.

Hausys,Kömmerling Veka as per Instruction of Architect .Door with Frame section Thousand One Hundred

58mmx60mm and door shutter of section size 102mmx60mm with Glass 5mm Thick Ninety And Paise

including lock and aldrop with all necessary fittings and installation and filling gaps Nineteen Only

with Silicon etc complete

DTP Maternity Home CHC Garbada 3 of

Item Quantities Items Description Estimated Rates Unit Total amount

Item Quantities Items Description Estimated Rates Unit Total amount

No. estimated but may In Figures In Words According to

be more or less Estimated

26 23.10 Sqm. Providing & Fixing UPVC PartitionPartly Glazed /Fully Glazed of Fenesta,LG 3757.20 Rupees Three Thousand Sqm.

Hausys,Kömmerling Veka as per Instruction of Architect .Partition with Frame section Seven Hundred Fifty

58mmx60mm including with Glass 5mm Thick fittings and installation and filling gaps Seven And Paise Twenty

with Silicon etc complete Only

27 22.50 Sqm. Providing and fixing flush door both sides laminated using shutter fabricated from 35 2597.72 Rupees Two Thousand Sqm.

mm thick solid core malemine faced three layered pre laminated flat pressed wood Five Hundred Ninety

based exterior grade bonded BWP/BWR synthetic resin having stamped IS 12823 Seven And Paise

grade I type II including three coats of lacquer polishing to exposed wooden surfaces Seventy Two Only

and Stainless steel decorative type designs fixtures / fastening etc.including I.T.W.

triangular batten patti of size 30m.m.x30m.m.etc. as per architectural detailed drawing

and as directed by engineer in charge.

28 516.80 Rmt.Providing and laying 19mm x 65mm round, 'D' edge and polished granite pencil patti 196.95 Rupees One Hundred Rmt.

on top, with cement paste and including backing coat in C.M. 1:4. All joints filled with Ninety Six And Paise

colour / epoxy grout and wiped to give sharp joints with flush pointing and washed Ninety Five Only

clean with acid etc.

29 47.15 Sqm. Providing and fixing factory-made UPVC combination sliding window of Fenesta,LG 9378.86 Rupees Nine Thousand Sqm.

Hausys,Kömmerling make,System SY09 – Luxury Slider Combination, Design Code Three Hundred Seventy

615, overall size 1050 mm (W) × 2800 mm (H), comprising two fixed panels and two Eight And Paise Eighty

sliding shutters (configuration (DFix.DFix)/(XiX)).The window frame shall be made of Six Only

uPVC multi-chamber sections having dimensions and shutter members shall consist

of top & bottom rails of as per manufacturer’s specification.Each openable panel shall

be fitted with 6 mm thick toughened glass (SG TGH) and all fixed panels shall have

glass secured in the same profile system with EPDM gaskets and weather seals. All

sections to have Foil 2S Walnut finish on both sides, with necessary hardware

including handles, locks, rollers, and interlocking profiles. The installation shall be

complete in all respects, ensuring perfect alignment, smooth operation, and weather

30 6.70 Sqm. Providing & Fixing UPVC Ventilation with Movable Louvers of Fenesta,LG 10651.46 Rupees Ten Thousand Sqm.

Hausys,Kömmerling Veka as per Instruction of Architect .Ventilation with Frame Six Hundred Fifty One

section 55mmx60mm including with Glass 5mm Thick fittings and installation and And Paise Forty Six Only

filling gaps with Silicon etc complete

DTP Maternity Home CHC Garbada 4 of

Item Quantities Items Description Estimated Rates Unit Total amount

Item Quantities Items Description Estimated Rates Unit Total amount

No. estimated but may In Figures In Words According to

be more or less Estimated

31 6.85 Sqm. Providing and fixing in position collapsible steel shutters with vertical channels 20 X 10 2419.89 Rupees Two Thousand Sqm.

X 2mm braced with flat iron diagonals 20 X 5 mm size with top and bottom rails of T- Four Hundred Nineteen

irn 40 X 40 X 6mm with 38mm dia steel pulleys, complete with bolts, nuts, locking And Paise Eighty Nine

arrangements stoppers, handles including applying a priming coat of read Iead paints Only

32 1255.00 Kg. Providing and fixing M.S. grills of required pattern to wooden frames of windows etc. 110.31 Rupees One Hundred Kg.

with M.S. flats at required spacing in and frame around square or round bars with Ten And Paise Thirty

round headed bolts and nuts or by screws. (A) Plain Grill. One Only

33 19.30 Sqm. Providing and fixing 0.60 meterwide and 0.80Metr high sand which type platform 5178.73 Rupees Five Thousand Sqm.

including supplying and fixing granite stone 18 mm thick mirror polished stones in top One Hundred Seventy

and side position and vertical strip at front over 25 mm thick polished kotah stone Eight And Paise Seventy

platform fixing in top and sides and intermediates supports fixing with cement mortar Three Only

and adhesive and finishing etc complete.

34 23.90 Sqm. Providing and fixing Godrej Type Steel cupboards in wall withsteel frames and 4683.37 Rupees Four Thousand Sqm.

shutters using 18 gauge M.S. steel sheet including necessary fixtures , fastening like Six Hundred Eighty

locks handles, hinges with approved shade of sparay painting etc complete as Three And Paise Thirty

directed Seven Only

35 25.50 Sqm. Providing and laying machine cut free edges machine polished Kota stone for shelves 1151.42 Rupees One Thousand Sqm.

in cupboard and walls in single piece (Miximum 150mm) 25 mm. th. including cutting One Hundred Fifty One

grooves in walls and fixing the stone with neat cement slurry in true line and level as And Paise Forty Two

direct. including moulding where required Only

36 599.20 Sqm. P & L 24" x 48" vitrified 8 mm thick tile flooring over 20 mm (average) base of cement 1990.71 Rupees One Thousand Sqm.

mortar 1:6 (1 cement: 6 coarse sand) on new surface or fixing on existing flooring by Nine Hundred Ninety

adhesive material including dismentaling of existing flooring and jointed with color And Paise Seventy One

cement slurry including finised with flush pointing & cleaning the surface etc. complete Only

for light shade/ Dark Shade and providing and filling epoxy based grout in grooves of

size up to 6mm x 6mm in flooring or dado with PVC spacer of BAL Endura / Kerakoll /

BASF or equivalent as per approved make of approved shade and color. Rate shall

be inclusive of protecting the edges, cleaning the grooves before filling and protecting

tile upto satisfaction of EIC. Rate shall be inclusive of filling groove through epoxy

based filler with PVC spacer as per manufacturer specification. Item shall be paid in

theoretical consumption on site.

DTP Maternity Home CHC Garbada 5 of

Item Quantities Items Description Estimated Rates Unit Total amount

Item Quantities Items Description Estimated Rates Unit Total amount

No. estimated but may In Figures In Words According to

be more or less Estimated

37 99.70 Sqm. Providing and laying Granite slab (18 mm thick) one side polished flooring ,Stair Riser 2199.78 Rupees Two Thousand Sqm.

Tread over 20 mm (average) base of cement mortar 1:6 (1 cement: 6 coarse sand) or One Hundred Ninety

L.M 1:1.5 laid and jointed with grey cement slurry including rubbing and polishing Etc Nine And Paise Seventy

complete. Eight Only

38 182.40 Sqm. Providing and laying 24" x 24" Vitrified double charge 8 mm thick tile flooring over 20 1472.91 Rupees One Thousand Sqm.

mm (average) base of cement mortar 1:6 (1cement : 6 coarse sand) or L.M 1:1.5 laid Four Hundred Seventy

on new surface or fixing on existing flooring by adhesive material including Two And Paise Ninety

dismentalling of existing flooring and jointed with colour cement slurry including One Only

finished with flush pointing & cleaning the surface etc.Pattern Colour and shade as

approved by architect. etc completed & Fitting Tiles with Spacer 4mm/5mm thick and

filling Groove with approved epoxy sealant and Hardner Resin as directed by A.I.C.

complete For Antiskid

39 1530.20 Sqm. Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in skrting risers of 1733.16 Rupees One Thousand Sqm.

steps and dedo on 10mm thick cement plastered Wall and Jointing or fitting tile with Seven Hundred Thirty

Tile adhesive Chemical(Roff,K2,Laticrete,Mapisa,pidilite C2TE S1 Only) and Three And Paise Sixteen

providing 4mm/5mm thick Spacer and filling Groove with approved epoxy sealant and Only

Hardner Resin epoxy based grout( BAL Endura / Kerakoll / BASF or equivalent as per

approved make & approved shade and color) in grooves in flooring or dado removing

PVC spacer etc. complete.as directed by A.I.C..

40 18.50 Sqm. Providing and laying chequered terrazo tiles 22mm thick with marble chips of sizes 788.35 Rupees Seven Hundred Sqm.

upto 6mm in floors on 25mm thick bed of Lime mortar 1:1.5 (1-Lime putty : 1.5 coarse Eighty Eight And Paise

sand) or C.M. 1:6 (1 - cement : 6 - coarse sand) jointed with neat cement slurry mixed Thirty Five Only

with pigment to match the shade of the tiles including rubbing and polishing complete.

(B) Dark shades using ordinary cement.

41 970.00 Sqm. Providing 10mm thick cement plaster in single coat onbrick/concrete walls for interior 229.17 Rupees Two Hundred Sqm.

plastering upto floor two level and finishing with floating coat of neat cement slurry Twenty Nine And Paise

even and smooth in (i)Cement mortar 1:3 (1-cement:3-sand) on ceiling and soffit Seventeen Only

42 919.10 Sqm. Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single 253.61 Rupees Two Hundred Sqm.

or half brick walls for interior plastering upto floor two level and finishing with floating Fifty Three And Paise

coat of neat cement slurry even and smooth in (i) Cement mortar 1:3 (1-cement:3- Sixty One Only

DTP Maternity Home CHC Garbada 6 of

Item Quantities Items Description Estimated Rates Unit Total amount

Item Quantities Items Description Estimated Rates Unit Total amount

No. estimated but may In Figures In Words According to

be more or less Estimated

43 313.50 Sqm. Providing 15 mm thick cement mala plaster in single coat on fair side bricks/concret 283.04 Rupees Two Hundred Sqm.

walls for interior plastering up to floor two level finished even and smooth in cement Eighty Three And Paise

mortar 1:4 (1 cement : 4 sand) etc complete. First Floor Four Only

44 1073.50 Sqm. Providing 20 mm thick double coat mala cement plaster on interior brick / concrete 290.71 Rupees Two Hundred Sqm.

work for plastering comprising of base coat of 12 mm thick cement plaster in cement Ninety And Paise

mortar (1 Cement : 4 coarse sand) in rough finishing and 8 mm thick top coat of Seventy One Only

cement mortar 1:2 (1 Cement : 2 Coarse sand) finished with trovel including

scaffolding curing etc. complete.

45 1073.50 Sqm. Providing and applying 2mm thick Texture Plaster Terre Plaette (Specturm, Coral or 383.80 Rupees Three Hundred Sqm.

equivalent) incoprating fine fillments made of polymer and aggergating natural stone Eighty Three And Paise

powder with making grooves on base coat of 20 mm thick smooth mala plaster (which Eighty Only

paid seperately) etc. complete.Colour and shade as approved by Architect/ Engineer

in charge for at all floor, all height.

46 2131.00 Sqm. Applying two coats of birla(White cement based) or Asian (acrylic lappy putty) or 40.59 Rupees Forty And Paise Sqm.

equivalent two coats of primer of approved brand and manufacture on new wall Fifty Nine Only

surface to give an even shade including thoroughly brushing the surface free from

mortar dropping and other matter foreign and sand papered smooth.

47 2131.00 Sqm. Providing and applying Wall painting (three coats) with plastic emulsion paint of 128.38 Rupees One Hundred Sqm.

approved brand and manufacture on under coated wall surface to give and even Twenty Eight And Paise

shade including throughly brushing the surface free from mortor droppings and other Thirty Eight Only

foreign matter and sand paperd smooth on new work to give an even shade.for all

48 1073.50 Sqm. Finishing wall with weather proof exterior emulsion paint (Apex) on wall surface (two 122.14 Rupees One Hundred Sqm.

coats) to give an required shape even shade and including priming coat and after Twenty Two And Paise

thoroughly brushing the surface to remove all dirt, and remains of loose powdered Fourteen Only

materials.etc complete.

49 77.00 Sqm. Painting two coats (including priming coat ) on new steel & other metal surfaces with 138.78 Rupees One Hundred Sqm.

enamel paint brushing interior to give an even shade including cleaning the surface of Thirty Eight And Paise

all dirt , dust & other foreign matter. Seventy Eight Only

DTP Maternity Home CHC Garbada 7 of

Item Quantities Items Description Estimated Rates Unit Total amount

Item Quantities Items Description Estimated Rates Unit Total amount

No. estimated but may In Figures In Words According to

be more or less Estimated

50 870.00 Sqm. Providing and laying chaina mosic water proofing treatment on terrace including 1136.38 Rupees One Thousand Sqm.

applying neat cement slurry 2.75 Kg./Sqm. Of cement admixed with water proofing One Hundred Thirty Six

compound after cleaning the surface (b) laying cement concrete usig brick bats 25 to And Paise Thirty Eight

100 mm size with 50% C.M. 1:5 (1 cement : 5 coarse sand) admixed with water Only

proofing compound over 20 mm thick layer of C.M. 1:5 to required slope including

rounding of junction of walls and slabs (a) after two days of proper curing applying a

second with 20 mm thick C.M. 1:4 and china mosaic tiling and finally finishing the

surface with trowel white cement slurry (e) after finishing the whole terrace shall be

flooded with water for a period of two weeks.

51 45.00 Each Providing and fixing 3mm thick PVC sheets as signage and display of health 333.30 Rupees Three Hundred Each

signs/information of required size having retro reflective letters/design as per Thirty Three And Paise

requirement, fixing the same through approved adhesive etc. complete, work shall be Thirty Only

carried out as per instruction of engineer-in-charge. (Approved make PVC foamed

sheets only)(45 x 15 cms)

52 31.30 Qtl Steel work welded in built up sections framed work including cutting, hoisting, fixing in 9108.48 Rupees Nine Thousand Qtl

position and applying a priming coat of red lead paint. [A.] In beams and joists, One Hundred Eight And

channels angles tees, flats with connecting plates or angle cleats as in main and cross Paise Forty Eight Only

beams, Hip and jack rafters, purlins connected to common rafters and the like.

53 200.00 Sqm. Providing corrugated G.I. sheet of class-3 roofing fixed with glavanished iron J or L 734.19 Rupees Seven Hundred Sqm.

Hooks, Bolts and nuts 8mm diameter with bitumen and G.I. limpet washer or G.I. Thirty Four And Paise

limpet washer. filled with white lead complete excluding the cost of purlins, Rafters Nineteen Only

and Trusses.(1) 0.80 mm thick sheet.

54 208.00 Sqm. Providing and Placing Bed SIde Medical Curtain with S.s. Rail with SS Ring etc 2020.00 Rupees Two Thousand Sqm.

complete rate incl. fabric fitings & accessories of approved make curtain fire retardent Twenty Only

55 143.60 Sqm. Providing and laying 16-18 mm thick polished granite stone machine cut in single 4018.79 Rupees Four Thousand Sqm.

piece (Max. available) in sill and jambs of door, window,ventilation & lift wall Eighteen And Paise

cladding,staircase risers & treads, skirting laid over 10 mm thick cement Plaster and Seventy Nine Only

Jointed with only Tile Adhesive chemical(Roff,K2,Laticrete,Mapisa,pidilite C2TE) with

matching pigment incl. rubbing and polishing,half rounding edge and incl. fixing of hilty

fastener at every 1/3 span of sill as required size etc. complete colour and shed as

approved by architect engineer in charge.

DTP Maternity Home CHC Garbada 8 of

Item Quantities Items Description Estimated Rates Unit Total amount

Item Quantities Items Description Estimated Rates Unit Total amount

No. estimated but may In Figures In Words According to

be more or less Estimated

56 50.00 Rmt. Fabricating, supplying and fixing in position SS railing for staircase with brush finish 2593.45 Rupees Two Thousand Rmt.

and 316 grade as per Indian Standrd and detailed drawing including grinding, cleaning Five Hundred Ninety

and filling the welded spots with SS finish (Only standard measurements will be paid Three And Paise Forty

for). Five Only

57 10.00 Nos Fabricating, supplying and fixing in position GRAB BAR 18" (450MM) For 1793.76 Rupees One Thousand Nos

handicapped toilet with brush finish and (S.S.304) grade as per Indian Standrd and Seven Hundred Ninety

detailed drawing including grinding, cleaning and filling the welded spots with S.S. Three And Paise

finish. Seventy Six Only

58 82.26 Nos Wall Painting (two coats) with antibacterial polyrethane epoxy paint approved brand 311.08 Rupees Three Hundred Nos

and manufacture on internal walls to give an even and smooth surface. Thoroughly Eleven And Paise Eight

brushing the surface free from mortar dropings and other rorieng matte and sand Only

papered smooth etc completed as directed by E.T.C/PMC .

59 797.40 SQM Pro. And fixing single layer water proof gypsum board 12.5 mm thick sections using 606.95 Rupees Six Hundred Six SQM

water proof board of size 1220 mm x 1830 mm x 8.0 mm suspended by GI suspender And Paise Ninety Five

channel of size 25 mm x 3 mm with intermediate channel og size 18 mm x 40 mm x Only

0.8 mm at 1220 mm center to center ceiling section of size 40 mm x 35 mm x

mm at 457 mm c/c nd perimeter channel A of size 20 mm x 27 mm x 30 mm x 0.5 mm

at edges & drops incl.paper tap sand sofit cleat, anchor fastener, scoch bolt

connecting cleat,joining compound top coat on ceiling incl.making necy.opening for

light fitting,diffuser etc. comp. as per detail drawing as directed

60 23.50 CUM Providing, laying controlled cement concrete M 250 and curing complete including the 8387.38 Rupees Eight Thousand CUM

cost of form work (rates for centering, shuttering, formwork staging scaffolding for Three Hundred Eighty

considering up to 4.50m height) but excluding reinforcement for reinforced concrete Seven And Paise Thirty

work in: (D) RCC Wall (i) up to Ground Floor slab level Eight Only

61 25.00 Nos. Supplying FRP Planter 15”x15”x15” made of white or any shade required FRP (Fibre 2601.76 Rupees Two Thousand Nos.

Reinforced Polymer) Planter Six Hundred One And

Paise Seventy Six Only

DTP Maternity Home CHC Garbada 9 of

Item Quantities Items Description Estimated Rates Unit Total amount

Item Quantities Items Description Estimated Rates Unit Total amount

No. estimated but may In Figures In Words According to

be more or less Estimated

62 75.70 Sqm PVC Fluted Panel Wall Panelling : Providing & Fixing wall paneling made from 12mm 5226.75 Rupees Five Thousand Sqm

thk Marine plywood ( IS:710 ) grade with back cladding of 3-4 mm ACP sheet fixed Two Hundred Twenty Six

level on wall with necessary hardware & Facia / Front Cladding with 10 to 12 mm And Paise Seventy Five

Thick PVC Fluted Panel Patta of approved make finished with groove pattern With Only

TOP & Side Edges Covered with Teak Wood Beading Patti as per detailed Drawings

and design completed finish as directed by EIC / Architect as per the sample

approved by the Architect.

63 189.50 Sqm Providing and making PVC planks for FALSE CEILING/wall covering using 8mm 2149.28 Rupees Two Thousand Sqm

thick Panel Size of 250mm Wide x 3000 mm Length with wooden or approved One Hundred Forty Nine

Shade and pattern & including all hardware fixtures and fasteners, S.S. screws, grips And Paise Twenty Eight

& Conrner angles including necessary framework wheerever required and as per Only

design, pattern, shapes and levels specified in detail drawings including cutting for

light fixtures. Complete as per architect's instructions & sized specified in detail

drawings.Material selection should be as per engineer in charge and architect.

64 82.80 Sqm shrubbery Plantation: Supplying well grown shrub plants of average height 3' to 4' and 1133.07 Rupees One Thousand Sqm

planting in 300 x 300 x 300 mm size pits by mixing of FYM & existing soil in ration 1:3 One Hundred Thirty

with soil, pesticide & insecticide. Plants should be disease free and fungus free in 8" x Three And Paise Seven

10" polythene bag. Plastic bags or pots should be removed carefully and soil around Only

the roots should not be dropped or disturbed much. Bill shall be plaaced after 45 days

of plantation of shrubs. Mortality rates to be inclusive. work shall be done as shown in

the drawing or as directed and approved by EIC/Architect. The ground coverage

should be dense and uniform throughout the planting area.

DTP Maternity Home CHC Garbada 10 of

Item Quantities Items Description Estimated Rates Unit Total amount

Item Quantities Items Description Estimated Rates Unit Total amount

No. estimated but may In Figures In Words According to

be more or less Estimated

65 25.00 Nos. Tree Plantation: supply and planting of tree of specified variety including excavation of 759.89 Rupees Seven Hundred Nos.

pit 600 × 600 Fifty Nine And Paise

x 600 mm depth mixing of FYM & existing soil in ratio 1:3 termite treatment and Eighty Nine Only

planting of plants (height 8' x 10" above bags/pots). Soil mounts 4'-8" in size. Tree

plantation should be carried on neatly accurately and with perfection as per drawing

and instruction given by the ECI. Plastic bags or pots should be removed carefully and

soil around the roots should not be dropped or disturbed much. Bill shall be placed

after completion of maintainance period but not before stablizing the hedges. Rates

for mortality to be inclusive. Providing and fixing tripod made of wooden ball, height

1.50 mtr. Top bracket to be 300 mm x 300 mm leg embedded in ground up to 300 mm

and to have tar coat. Work shall be done as shown in the drawing or as directed and

approved by ECI.

66 25.00 Nos. Fibre Pot Container 35x35cm 2226.73 Rupees Two Thousand Nos.

Two Hundred Twenty Six

And Paise Seventy

67 268.40 Sqm Semi Carpet Lawn as per park and Garden SOR Gandhinagar 121.42 Rupees One Hundred Sqm

Twenty One And Paise

68 35.00 Nos. Providing and fixing bright finish 2 mm thick Stainless steel (Grade 304) letters size up 542.37 Rupees Five Hundred Nos.

to 350 cm height in English language fixed in wall with screws and nails and any Forty Two And Paise

height including scaffolding etc complete as per instruction of Engineer-in-charge. Thirty Seven Only

69 13.80 Mtr Providing and fixing in position S.S. daso by providing top 50 mm dia stain less steel 1689.73 Rupees One Thousand Mtr

pipe rail with starting and end point vertical post of 50 mm dia with wall/column Six Hundred Eighty Nine

including bending welding and fixing for staircase and balcony as directed. (testing is And Paise Seventy

required of s.s 304) for all floor Three Only

70 426.20 Sqm Providing & Fixing the Chikenmesh - 20 guage (Crimp Jali) of approved size applying 134.33 Rupees One Hundred Sqm

between the RCC and masonry junction in proper line, level and plumb with all Thirty Four And Paise

material, labour, tools, tackles and equipment. Including providing and fixing the jali Thirty Three Only

with nails, etc complete as directed by the site-in-charge.

DTP Maternity Home CHC Garbada 11 of

Item Quantities Items Description Estimated Rates Unit Total amount

Item Quantities Items Description Estimated Rates Unit Total amount

No. estimated but may In Figures In Words According to

be more or less Estimated

71 75.00 Meter Providing laying and jointing in true line and level U.P.V.C. Pipe (SCH-40) including 72.65 Rupees Seventy Two Meter

fitting make or equivalent as approved by Engineer In charge. Pipe shall be fixed on And Paise Sixty Five

the wall with the help of clamp at everytwo meter C/C or shall be concealed as Only

directed including necessary fitting etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all materials. (i) 15mm dia.

72 120.00 Meter Providing laying and jointing in true line and level U.P.V.C. Pipe (SCH-40) including 91.84 Rupees Ninety One And Meter

fitting make or equivalent as approved by Engineer In charge. Pipe shall be fixed on Paise Eighty Four Only

the wall with the help of clamp at everytwo meter C/C or shall be concealed as

directed including necessary fitting etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all materials. (ii) 25mm dia.

73 80.00 Meter Providing laying and jointing in true line and level U.P.V.C. Pipe (SCH-40) including 148.12 Rupees One Hundred Meter

fitting of PRINCE/SUPREME/ASTRAL/FINOLEX or equivalent make or as approved Forty Eight And Paise

by Engineer In charge. Pipe shall be fixed on the wall with the help of clamp at Twelve Only

everytwo meter C/C or shall be concealed as directed including necessary fitting etc.

including testing of pipe and joints and fixing the same with adhesive solvent,

including cost of all materials. (i) 40mm dia.

74 80.00 Meter Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) 170.36 Rupees One Hundred Meter

PIPE having National Sanitation Foundation (NSF) seal for potable water of following Seventy And Paise Thirty

dia. nominal bore tube fittings and clamps including making good the wall, ceiling and Six Only

floor etc. complete.[A] 15 mm.

75 30.00 Each Providing and fixing 15 mm dia brass chromium plated screw down bib taps. 186.83 Rupees One Hundred Each

Eighty Six And Paise

Eighty Three Only

76 10.00 Each Providing & Fixing Sergical Bib cock of FLR-5043N of jaquar or Equivalent as directed 2376.53 Rupees Two Thousand Each

and complete. Three Hundred Seventy

Six And Paise Fifty

77 10.00 Each Providing & Fixing C.P. Brass angle valve 15mm etc. complete. 509.04 Rupees Five Hundred Each

Nine And Paise Four

78 9.00 Each Providing and fixing brass Cromiam Plated brass half trun Flush cock of approved 263.77 Rupees Two Hundred Each

quality including fixing in pipe line etc Complete. 25mm dia. Sixty Three And Paise

Seventy Seven Only

DTP Maternity Home CHC Garbada 12 of

Item Quantities Items Description Estimated Rates Unit Total amount

Item Quantities Items Description Estimated Rates Unit Total amount

No. estimated but may In Figures In Words According to

be more or less Estimated

79 4.00 Each Providing & fixing gun metal check or non-return full way wheel valve (A)15 mm dia. 186.83 Rupees One Hundred Each

Eighty Six And Paise

Eighty Three Only

80 5.00 Each Providing & fixing gun metal check or non-return full way wheel valve (C)25 mm dia 420.63 Rupees Four Hundred Each

Twenty And Paise Sixty

81 2.00 Each Providing & fixing gun metal check or non-return full way wheel valve (E) 40 mm dia 663.43 Rupees Six Hundred Each

Sixty Three And Paise

Forty Three Only

82 20.00 Each Providing and fixing 600 x 450 mm bevelled edge mirror of superior glass with 859.41 Rupees Eight Hundred Each

mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with Fifty Nine And Paise

C.P brass screws and washers. Forty One Only

83 20.00 Each Providing & fixing C.P. Brass towel rails complete with C.P. brass brackets fixed to 616.42 Rupees Six Hundred Each

wooden plugs with C.P. brass screws (B) 600 mm x 20 mm size Sixteen And Paise Forty

84 4000.00 Liter Supplying and Installing 3 layer PVC water tank (ISI) of required capacity each with all 12.78 Rupees Twelve And Liter

necessary fittings and connection etc. complete on terrace. Paise Seventy Eight

85 90.00 Meter Drilling of 215 mm dia. Bore in over burden strata (0-30) including lowering and fixing 330.27 Rupees Three Hundred Meter

of 175 mm nominal dia UPVC pipe/175 mm dia ERW pipe upto required depth and Thirty And Paise Twenty

further drilling of 165mm dia bore hole in rocky strata by DTH rig. Seven Only

86 24.00 Meter Manufacture, supply and delivery of ISI marked (IS-12818) with latest amendment. 915.06 Rupees Nine Hundred Meter

c) 175 mm nominal dia. "CS" type Fifteen And Paise Six

87 1.00 SET Single phase borewell submersible pump motor set 23175.46 Rupees Twenty Three SET

MOC: Casing: CI-FG260, Impeller: Bronze & Shaft: SS:410 Thousand One Hundred

Category Q-1.2, 20 LPM Discharge, 90 m Head, 1.5 HP Seventy Five And Paise

88 120.00 Meter Manufacture, supply and delivery of following ISI marked HDPE pipes (IS:4984/1985 55.55 Rupees Fifty Five And Meter

with latest amendment) having material Grade PE-80 in approximate 100 meter coil Paise Fifty Five Only

length or as per GWSSB requirement with SS- 316 nipple at both ends having 11 TPI

threads as per specifications, press fitted and bolted having nominal diameter as

under as per detailed technical specifications. DN 40 mm PN-10

DTP Maternity Home CHC Garbada 13 of

Item Quantities Items Description Estimated Rates Unit Total amount

Item Quantities Items Description Estimated Rates Unit Total amount

No. estimated but may In Figures In Words According to

be more or less Estimated

89 150.00 Meter PVC insulated flat submersible cable as per detailed technical specifications of R/C of 124.23 Rupees One Hundred Meter

GWSSB conforming to IS 694, IEC 60227 / 60228. 1 R x 3 C x 2.5 mm2 Twenty Four And Paise

Twenty Three Only

90 1.00 Job Lifting or Lowering of single phase submersible pump set complete with required 1010.00 Rupees One Thousand Job

length of HDPE pipe & cable in bore well and fitting of control panel board including Ten Only

wiring work and satisfactory testing as per instruction of Engineer-in-charge including

carting of material to site. Up to 90 meter depth

91 4.96 Cum Honey Comb Brickwork With Common Burnt Clay Building Bricks Having Crushing 2582.57 Rupees Two Thousand Cum

Strength Not less than 35 Kg / Sqmt (i) In Cement Mortar 1:6 (1 Cement 6 Coarse Five Hundred Eighty

Sand ) etc. Complete . Two And Paise Fifty

92 5.40 Smt (i) Half brick masonry in common brunt clay building bricks having crushing strength 590.01 Rupees Five Hundred Smt

not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 -coarse sand ) in Ninety And Paise One

foundation and plinth (B) Conventional (upto 10 ton) Only

93 80.00 Rmt Providing and fixing to wall, ceiling and floor 10.0 Kg f/cm2 working pressure 280.23 Rupees Two Hundred Rmt

polythelene pipes of the following outside dia. high density, complete with special Eighty And Paise Twenty

flange compression type fittings wall clamps etc. including making good the wall, Three Only

ceiling and floor 75mm

94 120.00 Rmt Providing and fixing to wall, ceiling and floor 10.0 Kg f/cm2 working pressure 339.05 Rupees Three Hundred Rmt

polythelene pipes of the following outside dia. high density, complete with special Thirty Nine And Paise

flange compression type fittings wall clamps etc. including making good the wall, Five Only

ceiling and floor 110MM

95 36.00 Rmt Provdg. & fixing on wall face PVC rain water pipe of FINOLEX, SUPREME, KISHAN 501.51 Rupees Five Hundred Rmt

or PRINCE brand is used incl. filling the joints with spun yarn soaked in neat cement One And Paise Fifty One

slurry and cement mortar 1:2 (1 cement : 2 fine sand) . PVC pipe 6 Kg/Sqcm. (ii) 110 Only

96 30.00 Each Providing and fixing PVC SWR Nahni Trap IS 14735 for drain with jali of the following 600.23 Rupees Six Hundred Each

nominal diameter of self cleansing design with C.I. Scread down or hinged grating And Paise Twenty Three

including the cost of cutting and making good the walls. (i) 100 mm dia Only

97 4.00 Each Providing & Fixing white or coloured glazed China Veterious China Orissa Pattern 1493.32 Rupees One Thousand Each

water closet squatting pan size 580 mm. x 440 mm. including providing and fixing Four Hundred Ninety

vetrious china 100 mm. size S or P trap including jointing the trap with pan and soil Three And Paise Thirty

pipe in C.M. 1:1 including all fitting and fixtures. Two Only

DTP Maternity Home CHC Garbada 14 of

Item Quantities Items Description Estimated Rates Unit Total amount

Item Quantities Items Description Estimated Rates Unit Total amount

No. estimated but may In Figures In Words According to

be more or less Estimated

98 14.00 Each Providing and fixing wash down wall hung /FLoor Mount water closet (European type) 2332.90 Rupees Two Thousand Each

of jaquar or equivalent with integral 'P' trap jointed within C.I pipe in C:M 1:1 including Three Hundred Thirty

matching seat cover, chair braket, Conceled metropole of jaquar or equivalent, 2 way Two And Paise Ninety

bibcock of jaquar or equivalent, health foucet of jaquar or equivalent with 1 m Only

extension pipe, toilet paper holder of jaquar or equivalent with all accessories etc.

99 4.00 Each provdg. & Fixing urinal of approved quality incl. connection with trap and with integral 1770.05 Rupees One Thousand Each

longitudinal flush pipe. (A) Squating plate pattern white earthenware 550mm x Seven Hundred Seventy

300mm. And Paise Five Only

100 17.00 Each Providing and fixing Veterious China flat back wash basin with single hole for pillar 2164.41 Rupees Two Thousand Each

trap with CI or MS brackets painted with including cutting holes and making good the One Hundred Sixty Four

same including all necessary fittings in white colour.including pillar trap15mm Dia & And Paise Forty One

Waste Pipe 32mm Dia Only

101 8.00 Each Providing and fixing ( 600 X 450 X 150 mm) size vitreous china laboratory sink with CI 2490.47 Rupees Two Thousand Each

or MS brackets painted white including cutting holes in wall and making good the Four Hundred Ninety

same 40 mm dia CP waste couplin rails etc. complete. And Paise Forty Seven

102 8.00 Each Providing and fixing in position PVC Cowel vent to pipes (ii) 75 mm. dia 154.24 Rupees One Hundred Each

Fifty Four And Paise

Twenty Four Only

103 8.00 Each Providing and fixing in position PVC Cowel vent to pipes (ii) 110 mm. dia 180.77 Rupees One Hundred Each

Eighty And Paise

Seventy Seven Only

104 20.00 Each Const. of brick masonary chamber for under ground inspection chambers & bends 2932.93 Rupees Two Thousand Each

with brick having crushing strength not less than 35 Kg. / cm² in C.M. 1:5 precast Nine Hundred Thirty Two

S.F.R.C top cover foundation concrete 1:5:10 in side plaster 15 mm thick with C.M. And Paise Ninety Three

1:3 finished smooth with floating coat of neat cement on walls & bed concrete, inside Only

dimension 455x 610 mm and 450 mm deep for single pipe line.

DTP Maternity Home CHC Garbada 15 of

Item Quantities Items Description Estimated Rates Unit Total amount

Item Quantities Items Description Estimated Rates Unit Total amount

No. estimated but may In Figures In Words According to

be more or less Estimated

105 57.75 Cum. Providing And Layling Vaccume Dewatering Process Ordinary cement Concrete M- 6432.21 Rupees Six Thousand Cum.

200 & Curing Comp. Including Compaction and Finishing of Cement Concrete Road Four Hundred Thirty Two

by Trimix process excluding rainforcement and Including all Material and labour And Paise Twenty One

chrages for trimix (Vaccum dewatering Services) Process on Cemnt Concrete road Only

Surface by using Vaccume dewatering pump,floater surface vibrator incl.making

groove 5 mm width and filling with polyminte polymer and rough finish to surface per

instruction incl.levelling etc complete.

106 647.24 Sqm. Providing and fixing pre-cast Rubber Dye inter locking concrete block 60mm thick with 702.02 Rupees Seven Hundred Sqm.

grade of concrete M200 pnumatic compressed by mechanically pressed and as per Two And Paise Two

approved design including 75mm Sand layer for levelling and filling the joint with Only

sand in proper line and level etc complete.

ELECTRIFICATION WORK Rupees Nil

107 120.00 Pt. Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both 582.77 Rupees Five Hundred Pt.

are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to Eighty Two And Paisa

10 mtr length , in below type of pipe erected with 6A Modular type switch / bell push & Seventy Seven Only

accessories and earth continuity of following type, erected on PVC / Metallic/Wooden

box, single mounting base frame covered with textured/metallic/white front plate

modules erected on / in wall / ceiling as per pipe erected, with necessary Lamp

holder/ceiling rose / H.D.Connector as directed. (f) with medium class Rigid PVC pipe

and accessories erected concealed in wall/ceiling complete Cat. III

108 60.00 Pt. Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of 810.02 Rupees Eight Hundred Pt.

.ISI marked 1.1 KV Grade FRLS PVC insulated multi strand copper wires up to 10 mtr Ten And Paisa Two Only

length, in below type of pipe erected with 6A Modular type switch and hum free EME

step type electronic fan regulator mounted and accessories with earth continuity of

following type erected on PVC / Metallic/Wooden box, single mounting base frame

covered with textured/metallic/white front plate modules erected on / in wall / ceiling

as per pipe erected. with necessary ceiling rose / H.D.Connector as directed. (f) with

medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling

complete Cat-III

DTP Maternity Home CHC Garbada 16 of

Item Quantities Items Description Estimated Rates Unit Total amount

Item Quantities Items Description Estimated Rates Unit Total amount

No. estimated but may In Figures In Words According to

be more or less Estimated

109 20.00 Pt. Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI 612.06 Rupees Six Hundred Pt.

marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr Twelve And Paisa Six

length, in below type of pipe erected complete with Modular type switch & 5 pin Plug Only

erected on PVC / Metallic/Wooden box covered with appropriate front plate modules

erected on / in wall / ceiling as per pipe erected with following type of accessories. [I]

For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from nearby switchboard/mcb

(f) with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling completeCat-III

110 60.00 Pt. Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin socket 309.06 Rupees Three Hundred Pt.

erected on PVC / Metallic/Wooden box, single mounting base frame covered with Nine And Paisa Six Only

textured / metallic/white front plate modules erected on / in wall / ceiling with

following type accessories. Cat.III

metallic/Wooden box, single mounting base frame covered with textured /

metallic/white front plate , modules erected with necessary connections as per site

situation directed by Engineer In charge.

112 40.00 Nos (9) 16 Amp. SP one way switch Cat.III 180.79 Rupees One Hundred Nos

Eighty And Paisa

Seventy Nine Only

113 40.00 Pt. (10) 6/16Amp. Universal socket Cat.III 199.98 Rupees One Hundred Pt.

Ninety Nine And Paisa

Ninety Eight Only

114 3.00 Pt. (4) TV Co-axial Socket outlet Cat-III 160.59 Rupees One Hundred Pt.

Sixty And Paisa Fifty

115 30.00 Nos (7) Blank Plate Single Cat-III 25.25 Rupees Twenty Five And Nos

Paisa Twenty Five Only

116 10.00 Nos (8) Computer RJ-45 Cat-III 160.59 Rupees One Hundred Nos

Sixty And Paisa Fifty

117 6.00 Nos (19) Modular Indicating Call Bell Cat.III 329.26 Rupees Three Hundred Nos

Twenty Nine And Paisa

Twenty Six Only

DTP Maternity Home CHC Garbada 17 of

Item Quantities Items Description Estimated Rates Unit Total amount

Item Quantities Items Description Estimated Rates Unit Total amount

No. estimated but may In Figures In Words According to

be more or less Estimated

118 400.00 EA Conduits & Pipes 24.24 Rupees Twenty Four EA

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size And Paisa Twenty Four

complete to be erected on/in wall or ceiling erected with necessary PVC fittings & Only

Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in

approved manner as directed

119 350.00 Mtr. b) 25 mm 33.33 Rupees Thirty Three And Mtr.

Paisa Thirty Three Only

120 50.00 Mtr. Providing & erecting PVC Corrugated Flexible Conduit with required nos. of coupling, 17.17 Rupees Seventeen And Mtr.

PVC bushes, Check-nuts etc. complete of following sizes. Paisa Seventeen Only

121 50.00 Mtr. (3) 25 mm 21.21 Rupees Twenty One And Mtr.

Paisa Twenty One Only

122 50.00 Mtr. Supplying & erecting UPVC Mini trunking (PVC Casing-n-Capping) having double- 31.31 Rupees Thirty One And Mtr.

locking arrangement with grooves, trunking of size not below 12.5 mm in height as per Paisa Thirty One Only

IS with accessories of PVC/Resin polypropylene not below 1.8 mm thick duly sealed

in joint & erected on wall / ceiling of following size .

123 50.00 Mtr. Supplying and laying UPVC cable trunking system comprising unplasticised polyvinyl, 188.87 Rupees One Hundred Mtr.

chloride rigid material with ignition free and flame proof confirming BS with necessary Eighty Eight And Paisa

end caps Internal and external bend, flat bends, coupler, tee etc..All necessary Eighty Seven Only

accessories and measuring of following sizes

(3) 50 mm x 50 mm trunking

124 50.00 Mtr. (1) 75 mm x 50 mm trunking 277.75 Rupees Two Hundred Mtr.

Seventy Seven And

Paisa Seventy Five Only

125 545.00 Mtr. Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked 104.03 Rupees One Hundred Mtr.

stranded Copper conductor wire in following type of pipe to be erected concealed in Four And Paisa Three

/flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated Only

stranded wire of green colour for earth continuity of following size

(a) with medium class Rigid PVC pipe and accessories

(b) 2 wire 2.5 sq. mm

DTP Maternity Home CHC Garbada 18 of

Item Quantities Items Description Estimated Rates Unit Total amount

Item Quantities Items Description Estimated Rates Unit Total amount

No. estimated but may In Figures In Words According to

be more or less Estimated

126 300.00 Mtr. Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor 140.39 Rupees One Hundred Mtr.

wire in following type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper Forty And Paisa Thirty

conductor FRLS PVC insulated stranded wire of green colour for earth continuity of Nine Only

(A) with medium class Rigid PVC pipe and accessories (a) 2 wire 4 sq. mm

127 50.00 Mtr. Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor 531.26 Rupees Five Hundred Mtr.

wire in following type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper Thirty One And Paisa

conductor FRLS PVC insulated stranded wire of green colour for earth continuity of Twenty Six Only

(A) with medium class Rigid PVC pipe and accessories (i) 4 wire 10 sq. mm (use

earth wire of 4 sq.mm )

128 50.00 Mtr. Providing & Erecting approved make following size of TV Co-axial flexible cable 39.39 Rupees Thirty Nine And Mtr.

comprising inner conductor of solid bare copper insulated with Foam PE & Secondary Paisa Thirty Nine Only

conductor made of poly - Aluminium film bonded Al. Braids @ suitable coverage

overall sheathed with black PVC insulation. a) RG -6

129 30.00 Mtr. Providing & erecting Switch board for Computer or electric apparatus consisting of 1133.22 Rupees One Hundred Mtr.

following modular type accessories mounted with PVC / Metallic concealed/open box Thirty Three And Paisa

with single mounting base frame covered with textured/metallic /white front Twenty Two Only

plate,modules erected with necessary connections as directed

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch 3 nos. 6A 5 pin Plug

For Modular Type Accessories cat iii

130 400.00 Mtr. Supplying & erecting approved make LAN cable of following size in existing pipe as 47.47 Rupees Forty Seven And Mtr.

per direction [C] CAT - 6 Paisa Forty Seven Only

131 1.00 Pt. Providing & erecting main Distribution (MDF) indoor type, back mounted frame (a) 994.85 Rupees Nine Hundred Pt.

Suitable for 10 pair Ninety Four And Paisa

Eighty Five Only

132 100.00 Mtr. ARMOURED ALLUMINIUM CABLES. 588.83 Rupees Five Hundred Mtr.

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium Eighty Eight And Paisa

conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / Eighty Three Only

pipe of following size of cables (E) 3 1/2 core 95 Sq. mm ( 50 Sq. mm 1/2 core)

133 100.00 Nos Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand 229.27 Rupees Two Hundred Nos

Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in Twenty Nine And Paisa

existing trench / pipe of following size of cables (B) 4 core 25 Sq. mm Twenty Seven Only

DTP Maternity Home CHC Garbada 19 of

Item Quantities Items Description Estimated Rates Unit Total amount

Item Quantities Items Description Estimated Rates Unit Total amount

No. estimated but may In Figures In Words According to

be more or less Estimated

134 200.00 Mtr. Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand 168.67 Rupees One Hundred Mtr.

Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in Sixty Eight And Paisa

existing trench / pipe of following size of cables (C) 4 Core 10 Sq.mm. Sixty Seven Only

135 401.00 Mtr. (B) 4 core 6 Sq. mm 151.50 Rupees One Hundred Mtr.

Fifty One And Paisa Fifty

136 169.00 Mtr. Making trench in soft soil of suitable width of 90 cms deep for laying cable or locating 55.55 Rupees Fifty Five And Mtr.

the fault all over the run and back filling the same and making the surface as a normal Paisa Fifty Five Only

137 80.00 Mtr. Providing & laying approved make Double walled corrugated pipes (DWC) of 137.36 Rupees One Hundred Mtr.

polyethylene(conforming to IS 14930 II )with necessary connecting accessories of Thirty Seven And Paisa

same material at required depth in existing trench for laying of cable. below ground / Thirty Six Only

road surface for enclosing cable (D)120 mm outer dia.

138 10.00 Mtr. CABLE GLANDS. 38.38 Rupees Thirty Eight And Mtr.

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for Paisa Thirty Eight Only

PVC insulated armoured cable complete with out going tails, insulating tape etc for

following size of cables.

(C) 2 to 4 core 10 Sq. mm

139 12.00 Mtr. (B) 2 to 4 core 6 Sq. mm 38.38 Rupees Thirty Eight And Mtr.

Paisa Thirty Eight Only

140 4.00 Nos (E) 2 to 4 core 25 Sq. mm 51.51 Rupees Fifty One And Nos

Paisa Fifty One Only

141 8.00 Nos Providing and, fixing heavy duty flange type brass cable gland with rubber ring for 131.30 Rupees One Hundred Nos

PVC insulated armoured cable complete with out going tails, insulating tape etc for Thirty One And Paisa

following size of cables. Thirty Only

(D) 3 & 1/2 core 95 Sq. mm

142 40.00 Nos CABLE LUGS. 13.13 Rupees Thirteen And Nos

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of Paisa Thirteen Only

following size evenly crimped with high pressure tool & connected to switchgear

terminals with brass/cadmium plated nut bolts in an approved manner.

143 47.00 Nos (A) 1.5/ 2.5/4/6 Sq.mm 6.06 Rupees Six And Paisa Nos

DTP Maternity Home CHC Garbada 20 of

Item Quantities Items Description Estimated Rates Unit Total amount

Item Quantities Items Description Estimated Rates Unit Total amount

No. estimated but may In Figures In Words According to

be more or less Estimated

144 16.00 Nos (C) 16/25 Sq.mm. 15.15 Rupees Fifteen And Nos

Paisa Fifteen Only

145 32.00 Nos (F) 95 Sq.mm. 40.40 Rupees Forty And Paisa Nos

146 85.00 Nos MINIATURE CIRCUIT BREAKERS. 123.22 Rupees One Hundred Nos

Miniature circuit breaker single pole 6A to 32A suitable to operate on 240 V A.C. Twenty Three And Paisa

system and having breaking capacity 10 KA to be erected in existing box. confirming Twenty Two Only

to IS 8828/1996 with ISI Mark

147 6.00 Nos Providing & erecting 240 V MCB double pole switch for motor & inductive load (C 363.60 Rupees Three Hundred Nos

Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing box having Sixty Three And Paisa

following capacity Sixty Only

(B) 40 Amp. Cat-III

148 6.00 Nos Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) 811.03 Rupees Eight Hundred Nos

having 10KA breaking capacity & confirms to IS :8828 in existing box having following Eleven And Paisa Three

(c)63 Amp. Cat.III

149 6.00 Nos Providing & erecting 415V MCB Four Pole Switch for Lighting Load (B curve) having 701.95 Rupees Seven Hundred Nos

10KA breaking capacity & confirms to IS :8828 in existing box having following One And Paisa Ninety

capacity Five Only

(b)40 Amp. Cat.III

150 4.00 Nos Providing and erecting Sheet Steel powder coated MCB distribution board - flush / 2445.21 Rupees Twenty Two Nos

surface mounted fitted with busbar, neutral link, earth bar and DIN rail, confirming to Thousand Four Hundred

IS 13032 and BS 5486-1986 without MCB to house appropriate nos. of MCBs.(The Forty Five And Paisa

DBs should be used of same company of MCB to be used) Twenty One Only

(B) three phase incoming and single phase horizontal type outgoing Per phase

isolation type (PPI) (b) sheet steel double door (ii)8 way

151 12.00 Nos EARTH LEAKAGE CIRCUIT BREAKERS. 2458.34 Rupees Twenty Two Nos

providing and erecting Approved make RCCBs conforming to IS: 12640 and having Thousand Four Hundred

sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and suitable for Fifty Eight And Paisa

operation on single phase 240 V,50Hz. having characteristic of quick action & tripping Thirty Four Only

with all advance feature & do not incorporate any electronic component. for following

Max. rating erected as directed

(ii) 40Amps. DP Cat-III

DTP Maternity Home CHC Garbada 21 of

Item Quantities Items Description Estimated Rates Unit Total amount

Item Quantities Items Description Estimated Rates Unit Total amount

No. estimated but may In Figures In Words According to

be more or less Estimated

152 2.00 Nos Providing and erecting metallic vitrified danger notice board as per language 69.69 Rupees Sixty Nine And Nos

suggested by engineer incharge for MEDIUM VOLTAGE installation to be erected as Paisa Sixty Nine Only

153 7.00 Nos Providing and erecting Approved make Four pole moulded case circuit breaker having 6790.23 Rupees Sixty Six Nos

breaking capacity ICU of 25 KA. at 415 V,having normal current rating up to 25 A to Thousand Seven

100A. with Fixed thermal & magnetic release suitable to work on A.C. supply 50 c/s. Hundred Ninety And

with all internal connections, spreader tinned copper & complete erected in existing 16 Paisa Twenty Three Only

G.M.S. housing. ICS=100% of ICU only Cat III

154 1.00 Nos Providing and erecting Approved make Four pole moulded case circuit breaker 17843.67 Rupees Seventeen Nos

having breaking capacity ICU of 35 KA. at 415 V. having Normal current rating Thousand Eight Hundred

200A.with variable Thermal & magnetic release suitable to work on A.C.supply 50 c/s. Forty Three And Paisa

with all internal connections, spreader tinned copper & complete erected in existing 16 Sixty Seven Only

G.M.S.housing ICS=100% of ICU only Cat III

155 2.00 Ea. Providing and erecting Approved make Four pole moulded case circuit breaker having 8861.74 Rupees Eighty Eight Ea.

breaking capacity ICU of 35 KA. at 415 V. having normal current rating 125A. with Thousand Eight Hundred

Fixed thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all Sixty One And Paisa

internal connections, spreader tinned copper & complete erected in existing 16 G.M.S. Seventy Four Only

housing. housing. ICS=100% of ICU only Cat III

156 2.00 Nos Supplying and erecting triple pole & neutral 440V / 500V panel mounting Copper 3202.71 Rupees Thirty Three Nos

Busbars with four equal Nos. of electrolyte bus having current density not more than Thousand Two Hundred

1.6 Amp. / sq.mm (Rated current / cross section area) duly wrapped with colour Two And Paisa Seventy

insulating tape for phase sequence of following current carrying capacity, erected with One Only

necessary bus bar supports /insulators, main cable socket to each bar, erected in

existing cubical panel with necessary connections. (B) Suitable for 200 Amp. capacity

157 1.00 Rn.Mtr Supply of Approved make Iron Clad or metal clad four pole change over switch 415V. 12240.19 Rupees Twelve Rn.Mtr

confirming to IS of following capacity Thousand Two Hundred

(B) 100 A / 125 A Forty And Paisa

DTP Maternity Home CHC Garbada 22 of

Item Quantities Items Description Estimated Rates Unit Total amount

Item Quantities Items Description Estimated Rates Unit Total amount

No. estimated but may In Figures In Words According to

be more or less Estimated

158 2.00 Ea. Providing & erecting weather proof, dust & vermin proof, floor mounted front operated 14902.55 Rupees Fourteen Ea.

indoor type cubical panel board having IP-64 protection made from 14 SWG thick Thousand Nine Hundred

CRC M.S. sheet for outer body & doors, 16 SWG thick CRC M.S.sheet for internal Two And Paisa Fifty Five

partitions with necessary supporting angles, flats including cutting, bending, drilling, Only

welding, riveting with internal partitions & cable alley as per requirements & instruction

of engineer-in-charge with erection of supplied switch gears, BUSBARS, with suitable

size of inter connecting PVC copper wire / copper-aluminium strips, rubber grommets,

rib, bakelite control fuses for measuring instruments, earth bus & earth bolts,

foundation flange - bolts-base Plates, sufficient nos. of hinged doors, handles with

locking arrangement and rubber gasket complete. The Panel shall be painted with

epoxy powder coating. (The rates excludes the cost of switchgears, bus bars, inter

connecting mains & Copper Aluminium strips, meters, Fuses etc. The dimension

shall be measured excluding base beams) The panel shall be supplied with following

approved manufacturers with following size.(B) The standard companies switch gear

shall be used and only manufacturers at CPRI approved factory (i) with 350mm depth

159 10.00 Sq. Mtr Supplying and erecting approved make suitable panel indicator LED type lamp, lens 43.43 Rupees Forty Three And Sq.

cover, complete erected with necessary connections. Paisa Forty Three Only Mtr

160 6.00 Nos providng and erecting Suitable set of CTS for 100A Energy Meter 2105.85 Rupees Twenty Two Nos

Thousand One Hundred

Five And Paisa Eighty

161 1.00 Each Supplying and erecting approved make panel mounting type Digital Voltmeter having 1275.63 Rupees Two Hundred Each

3 digits LED display, 0 to 750 AC Volts range erected on existing panel board with all Seventy Five And Paisa

connection, wiring etc .with manufacturers calibration certificate. Sixty Three Only

162 1.00 Ea. Supplying and erecting approved make panel mounting type Digital Ammeter having 1558.43 Rupees Five Hundred Ea.

3 digits LED display, external CT operated, calibrated for 0 to 1000 Amps suitable to Fifty Eight And Paisa

operate on 500 Volt AC , erected on existing panel board with all connection, wiring Forty Three Only

etc .with manufacturers calibration certificate.

163 3.00 Ea. Supplying and erecting Ammeter / Voltmeter selector switch for 3 phase AC Supply 317.14 Rupees Three Hundred Ea.

500 V on existing panel board with necessary connections. Seventeen And Paisa

DTP Maternity Home CHC Garbada 23 of

Item Quantities Items Description Estimated Rates Unit Total amount

Item Quantities Items Description Estimated Rates Unit Total amount

No. estimated but may In Figures In Words According to

be more or less Estimated

164 55.00 Ea. Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed copper 115.14 Rupees One Hundred Ea.

conductor with heat resistant PVC insulated conforms to IS 694, IEC - 227 erected in Fifteen And Paisa

existing pipe of following size (Specifically for control panel, relays, power Fourteen Only

switchgears, motor starters & control wiring) with required size of copper lugs, nuts

and bolts if required.(f) One wire 10.00 sq. mm

165 45.00 0.00 (g) One wire 16.00 sq. mm 177.76 Rupees One Hundred 0.00

Seventy Seven And

Paisa Seventy Six Only

166 35.00 Mtr. (h) One wire 25.00 sq. mm 295.93 Rupees Two Hundred Mtr.

Ninety Five And Paisa

Ninety Three Only

167 60.00 Mtr. CEILING FANS AND ACCESSORIS. 1948.29 Rupees Nine Hundred Mtr.

Providing & erecting Approved make Power Saving 50 Watt Ceiling Fan with double Forty Eight And Paisa

ball bearing ISI mark with Condenser 230 volt A.C. 50 Hz 1200 mm sweep complete Twenty Nine Only

having 3blades with aluminium blades with , canopy & 30 cm. down rod erected with

earthing.(Make shall be approved by Engineer in charge))

168 15.00 Mtr. Supplying & erecting approved make low noise decorative exhaust fan having square 1703.87 Rupees Seven Hundred Mtr.

frame ABS body with inbuilt lowers & square frame.250mm with 1350 RPM Cat.II Three And Paisa Eighty

169 2.00 Kg. Supplying & erecting single phase approved make industrial exhaust fan suitable for 2054.34 Rupees Twenty Two Kg.

medium duty ring mounted low noise operation suitable for medium duty having Thousand Fifty Four And

following dia size and maximum speed in RPM [A] 305 mm dia 900 RPM Cat II Paisa Thirty Four Only

170 60.00 Kg. Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt 373.70 Rupees Three Hundred Kg.

assembled on single MCPCB, with housing used as a heat sink shall be made of Seventy Three And

thick sheet Steel conforming to IS: 513/CRCA polyester powder coated and high U.V. Paisa Seventy Only

& corrosion resistance with diffuser and/or Polycarbonate optics with company

mark/name 120 to 300 V,Power Factor more than 0.9, THD < 10 %,CCT 4000 K to

6500K, Uniformity ratio >0.7, Luminaire efficiency> 85 lumens/watt , LED driver

efficiency > 85 % CREE / OSRAM / PHILIPS Lumileds / NICHIA /

SEOUL/Bridgelux(U.S.A.) make LED used for luminaire. (Each fitting required LM-79

& LM-80 Certificates) (A) Tube Light with integral/ non-integral driver (iv) 22-24 Watts,

Surge - 4KV,IP-20, 4 feet Cat-lll

DTP Maternity Home CHC Garbada 24 of

Item Quantities Items Description Estimated Rates Unit Total amount

Item Quantities Items Description Estimated Rates Unit Total amount

No. estimated but may In Figures In Words According to

be more or less Estimated

171 40.00 Sq.Mtr Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt 589.84 Rupees Five Hundred Sq.Mtr

assembled on single MCPCB, with housing used as a heat sink shall be made of Eighty Nine And Paisa

thick sheet Steel conforming to IS: 513/CRCA polyester powder coated and high U.V. Eighty Four Only

& corrosion resistance with diffuser and/or Polycarbonate optics with company

mark/name 120 to 300 V,Power Factor more than 0.9, THD < 10 %,CCT 4000 K to

6500K, Uniformity ratio >0.7, Luminaire efficiency> 85 lumens/watt, LED driver

efficiency > 85 % CREE / OSRAM / PHILIPS Lumileds / NICHIA /

SEOUL/Bridgelux(U.S.A.) make LED used for luminaire. (Each fitting required LM-79

& LM-80 Certificates)Square/ Circular Surface/Recessed Mounted Downlight/Hanging

with provision for spring loaded mounting clips complete.(iii) 16-20 watts, Surge-2 KV,

Surge-4 KV Cat III

172 20.00 Nos Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt 1794.77 Rupees Seven Hundred Nos

assembled on single MCPCB, with housing used as a heat sink shall be made of Ninety Four And Paisa

thick sheet Steel conforming to IS: 513/CRCA polyester powder coated and high U.V. Seventy Seven Only

& corrosion resistance with diffuser and/or Polycarbonate optics with company

mark/name 120 to 300 V,Power Factor more than 0.9, THD < 10 %, CCT 4000 K to

6500K, Uniformity ratio >0.7, Luminaire efficiency> 85 lumens/watt, LED driver

efficiency > 85 %CREE / OSRAM / PHILIPS Lumileds / NICHIA /

SEOUL/Bridgelux(U.S.A.) make LED used for luminaire. (Each fitting required LM-79

& LM-80 Certificates)(B) LED Panel Light with provision for Plane front frame with

translucent cover fixed to housing complete.IP20 (vi) 36 watts, 24" x 24", Surge- 2KV,

DTP Maternity Home CHC Garbada 25 of

Item Quantities Items Description Estimated Rates Unit Total amount

Item Quantities Items Description Estimated Rates Unit Total amount

No. estimated but may In Figures In Words According to

be more or less Estimated

173 6.00 Mtr. Supplying & erecting earth pit of minimum bore dia.150mm size approved make 4591.46 Rupees Forty Four Mtr.

Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of Thousand Five Hundred

corrosion free hot dipped G.I.Pipes having Outer pipe dia of 50mm having 80-200 Ninety One And Paisa

Micron galvanising, Inner pipe dia of 25 mm having 200-250 Micron galvanising, Forty Six Only

connection terminal dia of 12mm with constant ohmic value surrounded by highly

conductive compound with high charge dissipation suitable for following type of

applications with chamber and heavy duty cover. (A)(approved make OEM has to

submit test certificate including value of earth resistance of installation duly stamped

and signed by agency and officer Incharge has to ensure the value of earthing

resistane mentioned in test Certificate) & having back filling compound of (B) Inner

chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter testing as per IEC 62561-

2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:- <2%(C) Back fill

Compound :- Earthing compound should be capable to retain moisture for long time

Necessary test report must be submitted by Agency. (a) For Electrical Installation up

to 440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

174 60.00 Nos Providing and erecting Annealed bare Copper wire 8 to 16 SWG. Rupees Seven Hundred

Ninety Four And Paisa

Eighty Seven Only

175 2.00 Nos Providing & erecting water cooler having storage capacity 150 Ltr. & cooling capacity 61482.74 Rupees Sixty One Nos

150 Ltr.per hour @ an ambient temp of 45˚ C. The outlet temp. of the water should Thousand Four Hundred

drop by 15˚C within a hour, The water cooler should be comprising of hermetically Eighty Two And Paisa

sealed compressor, fan motor, condensing unit, water tank surrounded by Seventy Four Only

evaporating, coil, thermostats, relay etc.complete with necessary inlet & outlet

connection. The body of water cooler will be made from Stainless Steel.

176 2.00 Nos Supplying & erecting 5 stage single reverse osmosis water purification system with 29187.99 Rupees Twenty Nine Nos

M.S. powder coated frame, prefilter housing with 'O' ring presediment filter GAC filter, Thousand One Hundred

carbon filter suitable buster DC pump capacity 80 psi, mention with 40 psi inline type Eighty Seven And Paisa

post carbon filter auto low & high pressure switches with following size of storage tank Ninety Nine Only

& LPH capacity & erected as directed [C] 50 Ltr / Hr with 150 psi 2 nos booster pump

DTP Maternity Home CHC Garbada 26 of

Item Quantities Items Description Estimated Rates Unit Total amount

Item Quantities Items Description Estimated Rates Unit Total amount

No. estimated but may In Figures In Words According to

be more or less Estimated

177 6.00 Nos Supplying & erecting Galvanized M.S pipe post “B” class 88.9 mm O.D 6 mtr. Long 4440.97 Rupees Forty Four Nos

duly painted with two coats of aluminium paint complete with metallic base- plate of Thousand Four Hundred

300 mm x 300 mm x 4mm thick for using as a compound light pole with approx. Forty And Paisa Ninety

weight 47 Kg. Seven Only

178 6.00 Nos Providing and erecting Street Light pole bracket comprising main B Class MS pipe of 626.20 Rupees Six Hundred Nos

4.2 cm/require outside dia. complete with suitable B Class M.S. sleeve tubing of Twenty Six And Paisa

approx. 45cms.length and suitable for 76.5 mm /80mm / required size of pole top Twenty Only

having sufficient fasteners for fixing the brackets and having spread of 1.5.mtr. length

with 110 deg.with vertical plane & suitable welded stays, reducer and with check nuts

complete painted with one coat of Red oxide / PU base primer and two coats of

Aluminium / PU paint. paint with following nos of arms.[A] Single Arm Bracket 1.5 Mtr

179 6.00 Nos Providing M-20 / 1:2:4 cement concrete foundation & 70 % PCC from bottom including 809.01 Rupees Eight Hundred Nos

excavation for the pole of size 45 x 45 x 100 cms. Deep in below ground level with Nine And Paisa One

plinth of 45 cms x 45 cms (or 45 cms dia x 45 cms) high upper ground level with Only

necessary curing and finishing in approved manner.

( for 4 & 6 mtr pole)

180 12.00 Nos Supplying & erecting approved make SMC press moulded composite FRP. loop-in, 515.10 Rupees Five Hundred Nos

loop-out approx. 2mm thick box complete with Bakelite connector strip Fifteen And Paisa Ten

5way(3P+N+E),DIN rail for mounting mob & hinged doors as per requirement having Only

locking arrangements with mounting clamp with nuts, bolts & washers suitable for

erection on pole with cable clamps& earth bolt of following size of box.(B) 250mm x

200mm x 100mm [deep]

DTP Maternity Home CHC Garbada 27 of

Item Quantities Items Description Estimated Rates Unit Total amount

Item Quantities Items Description Estimated Rates Unit Total amount

No. estimated but may In Figures In Words According to

be more or less Estimated

181 6.00 Nos Supplying and erecting LED street light / Flood light fittings with High power White 7186.15 Rupees Seventy Seven Nos

LEDs wattage of 1Watt and above assembled on single MCPCB, efficiency more than Thousand One Hundred

130 lm/w and corrosion free High pressure die cast aluminum housing with smooth Eighty Six And Paisa

finish powder coated and heat sink extruded aluminium with diffuser and Fifteen Only

Polycarbonate optics/ lenses with company mark/name engraved or embossed 120 to

300 V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to 5700K, Uniformity

ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED driver efficiency > 85 %.CREE

/ OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/ BridgeLux (U.S.A.) make LED used

for luminaire. ( fittings required LM-79 & LM-80 certificates)(NOTE: Below description

have shown ranges of Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.)

(B) Flood Light (IP-65), Surge -4KV,Light must have 440VAC line supply protection. It

should withstand 48 hours for 440VAC line supply (v) 120 - 159 watts Cat III

182 6.00 Nos Supplying and erecting LED street light / Flood light fittings with High power White 4248.06 Rupees Forty Four Nos

LEDs wattage of 1Watt and above assembled on single MCPCB, efficiency more than Thousand Two Hundred

130 lm/w and corrosion free High pressure die cast aluminum housing with smooth Forty Eight And Paisa

finish powder coated and heat sink extruded aluminium with diffuser and Six Only

Polycarbonate optics/ lenses with company mark/name engraved or embossed 120 to

300 V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to 5700K, Uniformity

ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED driver efficiency > 85 %.CREE

/ OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/ BridgeLux (U.S.A.) make LED used

for luminaire. ( fittings required LM-79 & LM-80 certificates)(NOTE: Below description

have shown ranges of Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.)

(A) Street Light (IP-65), Surge protection -4KV integral and ,Light must have 440VAC

line supply with over-voltage protection.

(ii) 48 - 59 Watts CAT III

DTP Maternity Home CHC Garbada 28 of

Item Quantities Items Description Estimated Rates Unit Total amount

Item Quantities Items Description Estimated Rates Unit Total amount

No. estimated but may In Figures In Words According to

be more or less Estimated

183 1.00 Nos Supplying & erecting approved make Digital time switch having lithium cell 6 years 3168.37 Rupees Thirty Three Nos

operative and operate battery backup 1 channel day clock with 14 memory Thousand One Hundred

programme, suitable to operate on 240V + 5%, 16A with, floating contacts Minimum Sixty Eight And Paisa

switching setup time 1 minimum & LCD display. Also comprised permanent ON/OFF Thirty Seven Only

switching. Programming switches & housed in fire proof thermoplastic enclosure &

transparent cover erected as required with necessary connection erected as directed.

184 6.00 Ea. Supply, Installation, Testing and Comissioning of 4MP Fixed Lens Dome Type 8530.08 Rupees Eighty Eight Ea.

Camera, H.265 4MP IR Vandal Proof Dome N/W Camera, 2.8mm/3.6mm, 30M Thousand Five Hundred

IR, Micro SD, DC12V/PoE, IP67/IK10, Basic IVA, 1 / 2.7" CMOS, 2560 × Thirty And Paisa Seven

1440, 0.01 Lux, F1.2, AGC ON; Defog, True day/night, Digital WDR, 3D Only

DNR, HLC & BLC, Triple streams, Smart codec by ROI, Cyber Security, Basic

intelligent video analytics, NDAA Compliance, UL, CE, FCC Certified

(Including Five year free maintenance with guarantee)

185 2.00 Ea. Supply, Installation, Testing and Comissioning of 4MP Fixed Lens Bullet Type 8530.08 Rupees Eighty Eight Ea.

Camera, H.265 4MP IR Bullet N/W Camera, 3.6mm / 6mm, 50M, Micro SD, Thousand Five Hundred

DC12V/PoE, IP67/IK10, Basic IVA, 4MP resolution (2560 × 1440), True Thirty And Paisa Seven

day/night, Digital WDR, 3D DNR, HLC & BLC, Triple streams, Smart codec by Only

ROI, Cyber Security Basic intelligent video analytics, NDAA Compliance, UL,

CE, FCC Certified (Including Five year free maintenance with guarantee)

186 1.00 Nos Supply, Installation, Testing and Comissioning of 16 Channel Network Video 21632.24 Rupees Twenty One Nos

Recorder (NVR), 1, RJ-45 10/100/1000 Mbps self- adaptive Ethernet Thousand Six Hundred

interface, Supports H.265+/ H.265/H.264/H.264+ decoding formats, Thirty Two And Paisa

Embedded NVR, 2 HDD Bays, up to 6TB capacity each disk, HDMI, VGA output, 1- Twenty Four Only

ch @ 8 MP / 4- ch @ 1080p, Incoming bandwidth 160Mbps, Outgoing 80 Mbps, CE

FCC, BIS, Operating Temp -10 deg to 55 deg C, 2xUSB 2.0 1USB and

serial Interface (Including Five year free maintenance with guarantee)

187 1.00 Kg. Supply Installation Testing and commissioning of 8 PORT POE SWITCH with 7298.30 Rupees Seventy Seven Kg.

required all necessary accessories to complete th job. MAKE:- Dahua Thousand Two Hundred

Ninety Eight And Paisa

188 1.00 kg Supply Installation Testing and commissioning of 10 TB HARD DISK with min 30 35012.89 Rupees Thirty Five kg

days back up. Thousand Twelve And

MAKE:- SEAGATE Paisa Eighty Nine Only

DTP Maternity Home CHC Garbada 29 of

Item Quantities Items Description Estimated Rates Unit Total amount

Item Quantities Items Description Estimated Rates Unit Total amount

No. estimated but may In Figures In Words According to

be more or less Estimated

189 1.00 Ea. Supply, installation, testing and commissioning of 9 U Rack including 73463.68 Rupees Seventy Three Ea.

necessary power mounting and fan arrangements for mounting CCTV equipments Thousand Four Hundred

Sixty Three And Paisa

Sixty Eight Only

190 1.00 Ea. Supply, Installation, testing and commissioning of 49 inch professional display/TV 56880.78 Rupees Fifty Six Ea.

for 16X7 AVSI and digital signage application with full HD resolution /HDMI /DVI /VGA Thousand Eight Hundred

/RS232 /USB /RJ45 /Wifi ready/Built-in speakers, Inbuilt media player (refer to Eighty And Paisa

annexure - 1 for detailed specifications) Seventy Seven Only

191 5.00 Ea. Providing and erecting approved make split air-conditioning unit consisting of copper 49730.38 Rupees Forty Nine Ea.

condensing unit with fan motor, hermetically sealed rotary compressor with Thousand Seven

accessories etc. duly connected separately erected evaporating unit and blower motor Hundred Thirty And

with its accessories by means of extra supplied proper insulated copper tubing,drain Paisa Thirty Eight Only

PVC pipes suitable for ( cost includes powder coated Stand, Eco Friendly green gas

charging, 15A plug top & Remote Control) with necessary core cutting. (2)For ISEER

Range (KWH/KWH)(4.0 to 4.49) (b) for 1.5 ton capacity

192 4.00 Ea. (c) for 2 ton capacity Rupees Sixty Five

Thousand Two Hundred

Twenty Two And Paisa

Seventy Seven Only

193 90.00 Ea Supplying and erecting insulated pair of soft copper tubing open or concealed 1158.47 Rupees One Hundred Ea

including power and control cable,necessary PVC drain pipes for Split AC machine Fifty Eight And Paisa

up to 4 TR capacity Forty Seven Only

194 2.00 Ea. Supplying and erecting approved make online Un-interruptible Power Supply system 82941.20 Rupees Eighty Two Ea.

comprising flat cum-boost charger with IGBT base rectifier & Inverter & sealed Thousand Nine Hundred

maintenance free SMF batteries. The charger having operating capacity for input 160- Forty One And Paisa

270V AC & inverter having output 230V,50 Hz Ac with 0.8 load power factor with Twenty Only

battery, over/under voltage output with over load & short circuit protection equipment.

The system housed in CRC sheet duly powder coated paint with following power

backup.with MS painted batteries stand, 10% Overload capacity for momentary

load..(C) 3 KVA with 1Hr Backup

DTP Maternity Home CHC Garbada 30 of

Item Quantities Items Description Estimated Rates Unit Total amount

Item Quantities Items Description Estimated Rates Unit Total amount

No. estimated but may In Figures In Words According to

be more or less Estimated

195 5.00 ea Supplying and erecting approved make Instantaneous type water heater with 4370.27 Rupees Forty Four ea

3Itr.capacity rust free container housed in ABS plastic body insulated with glass wool / Thousand Three

puff insulation and 3 Kw heating elements,adjustable thermostat 300 C to 850 C with Hundred Seventy And

set to operate at 850 C (+ /-60 C ) auto reset indication lamps, thermal cut-out, safety Paisa Twenty Seven

valve fusible plug etc. Cat III Only

Generating (DG) Set(s) of prime power rating (kVA) as specified, complete as a

packaged system, conforming to CPCB IV+ (or better) emission norms, and

complying with all applicable statutory requirements, codes and standards including

(but not limited to) IS 4722:1968, IS 13364 (Part 2) and BS 5514 (latest

editions/amendments). The DG set shall be suitable for 415 V ±10%, 50 Hz ±5%, 3-

phase, 4-wire operation at 0.8 lagging power factor, 1500 RPM, for tropical conditions,

and shall be capable of delivering 10% overload for one (1) hour after twelve (12)

hours of continuous operation (ISO 8528), unless otherwise stated by the OEM. The

scope shall include complete accessories, interconnections, foundations/anti-vibration

arrangements, exhaust system, acoustic enclosure, earthing (as required),

consumables for first commissioning, and all works necessary to render the

installation fully functional and compliant, as directed by the Engineer-in-Charge (EIC).

Factory testing shall be carried out with fuel and load bank at 0.8 power factor and the

DG set shall be offered for inspection prior to dispatch. The DG set shall be provided

with a durable QR code/label fixed on the enclosure/control panel, linking to a

document repository containing (as a minimum) approved GA drawings, wiring

diagrams, foundation and installation details, OEM catalogues, operating &

maintenance manuals, factory test reports, type test certificates (where applicable),

warranty certificate, geo-tag of manufacturing location, and rating plate data as per

relevant IS/BS/ISO requirements. The OEM/Contractor shall provide a Remote

Monitoring System (RMS) with minimum one (1) year connectivity (SIM/data

plan/server access as applicable), including dashboard access, user ID/password,

and data download facility. RMS shall, at minimum, capture and report: DG status

(Auto/Manual/Off), start/stop events, kW/kVA/kVAR, V/I/Hz, PF, run hours, fuel level,

battery voltage, alarms/trips with time stamp, and GPS/location (where supported). All

licences/subscriptions required for the stated period shall be included in the quoted

DTP Maternity Home CHC Garbada 31 of

Item Quantities Items Description Estimated Rates Unit Total amount

Item Quantities Items Description Estimated Rates Unit Total amount

No. estimated but may In Figures In Words According to

be more or less Estimated

Turbocharged, 4-stroke, water-cooled, multi-cylinder diesel engine, suitably rated for

the specified DG set prime rating at site conditions, complete with dynamically

balanced flywheel, heavy-duty engine mounting, and electric starting arrangement.

The engine governing shall be electronic (isochronous/droop as per OEM standard)

and shall comply with ISO 8528/BS 5514 requirements for steady-state speed

regulation. Engine shall be complete with dry type air cleaner with restriction indicator,

lube oil cooler (if required), radiator/cooling package (as applicable), and all

sensors/switches required for protections and annunciation. The engine shall be

capable of 10% overload for one (1) hour after twelve (12) hours continuous operation

and shall be suitable for continuous duty under tropical ambient conditions. The

offered engine model shall be CPCB IV+ compliant and shall be supplied with

complete emission control/after-treatment system (including DEF/urea dosing where

applicable) along with all accessories, tanks, pumps, heaters and controls required for

compliant operation. The supply shall include first fill of lubricating oil, coolant and

consumables required for initial commissioning and testing. All fasteners, couplings,

guards, hoses and standard/recommended accessories required for safe and reliable

operation shall be included and shall be subject to inspection/approval by the EIC.

(B) Engine-Mounted Instrumentation/Control Panel:

Engine-mounted instrument/control panel shall be microprocessor based, with

LCD/LED display, event log and alarm/trip annunciation, complete with all wiring,

harnesses and terminations. Indications/protections shall include (minimum) the

following and any additional protections recommended by the OEM: (i) Start/Stop key

switch and/or push buttons with emergency stop; (ii) Output breaker: suitably rated 4-

pole ACB/MCCB/MCB as applicable, with minimum 25 kA rupturing capacity (or as

per fault level at site, whichever is higher), with shunt trip where required; (iii) Jacket

water/coolant temperature – indication and high temperature alarm/trip; (iv) Lube oil

pressure – indication and low pressure alarm/trip; (v) Lube oil temperature (where

provided) – indication/alarm; (vi) Battery charging indication, battery voltage indication

and charging failure alarm; (vii) Engine speed (RPM) indication and overspeed trip;

DTP Maternity Home CHC Garbada 32 of

Item Quantities Items Description Estimated Rates Unit Total amount

Item Quantities Items Description Estimated Rates Unit Total amount

No. estimated but may In Figures In Words According to

be more or less Estimated

Synchronous, brushless alternator of appropriate kVA rating, 415 V, 3-phase, 50 Hz,

1500 RPM, 0.8 lagging PF, continuous duty, dynamically balanced rotor, self-cooled,

self-excited and AVR regulated. Enclosure shall be SPDP, minimum IP23. Insulation

shall be Class H with suitable tropicalization; temperature rise shall be within limits of

the applicable standard. The alternator shall comply with IS 13364 (Part 2), IS

and/or BS 2613 (latest), as applicable. Voltage regulation with AVR shall be within

±1.0% (steady state) or OEM standard whichever is better. The alternator shall be

capable of 10% overload for one (1) hour after twelve (12) hours of continuous

operation. Harmonic distortion shall be suitable for non-linear loads; alternator shall be

equipped with appropriate AVR features (e.g., soft start, UFRO) and shall be suitable

for motor starting duties typical to the installation. Terminals shall be brought out to a

terminal box with adequate space for termination and shall include earthing terminals.

All routine/type test certificates (as applicable) shall be submitted for acceptance.

(D) Base Frame & Foundation: Engine and alternator shall be mounted on a suitably

designed, fabricated MS channel base frame with stiffeners, lifting arrangement and

coupling guard, duly painted/treated for corrosion protection. The set shall be installed

on an adequately designed cement concrete foundation/pedestal with anchor bolts,

pockets, grouting and anti-vibration mounts (AVMs) / spring isolators as per OEM

recommendations and site conditions. Vibration levels shall be within OEM

permissible limits. The contractor shall be responsible for alignment, levelling,

tightening torque and re-check after load trial, complete in all respects.

(E) Fuel Tank: In-built/base fuel tank fabricated from minimum 3 mm thick MS sheet,

duly leak-tested, complete with filling arrangement, vent, drain, cleaning opening, level

indication and isolation valve(s). The capacity shall be adequate for minimum eight (8)

hours continuous operation at full load. Fuel piping between tank and engine shall be

MS ‘C’ class pipes of suitable diameter with compatible flexible connections (where

required), complete with all valves, clamps, supports, unions and fittings. Any

additional safety provisions required by local fire authority/UGVCL/competent authority

(such as double wall/bunding, flame arrestor, etc.) shall be provided within the quoted

DTP Maternity Home CHC Garbada 33 of

Item Quantities Items Description Estimated Rates Unit Total amount

Item Quantities Items Description Estimated Rates Unit Total amount

No. estimated but may In Figures In Words According to

be more or less Estimated

12 V / 24 V DC electric starting system (as per OEM design) comprising starter motor(s),

battery charger/alternator charging arrangement, relays, cabling and terminals, complete

with maintenance-free batteries of suitable Ah capacity to ensure minimum three (3)

consecutive cranking attempts. System shall include battery isolator and indication of

charging healthy/failure. All battery interconnections shall be with crimped lugs, insulated

sleeves and proper supports, complete in all respects.

(H) Acoustic and Weatherproof Enclosure: Acoustic enclosure shall be factory-fabricated,

weatherproof and corrosion protected, suitable for outdoor installation, with minimum IP65

protection (or better) for the enclosure body. Enclosure design shall provide adequate

fresh air intake and hot air discharge for engine radiator and alternator cooling such that

the internal temperature rise remains within OEM limits at full load. Provision shall be

made for safe access/maintenance including lockable doors, viewing window (where

provided), emergency stop access, and cable entry glands. Noise level of the complete

DG set with enclosure shall not exceed 75 dB(A) measured at 1.0 m distance in free field

conditions, in accordance with applicable CPCB requirements. The enclosure shall comply

with CPCB IV+ (or better) requirements and other applicable local rules/regulations. All

louvers, acoustic infill/insulation, fasteners and sealing arrangements shall be of fire-

retardant/industrial grade as per OEM standard. Any deviation from the specified noise/IP

requirements shall be treated as non-compliance unless explicitly approved by the EIC in

Erection, testing, commissioning and satisfactory performance demonstration shall be

carried out as per site requirements and as directed by the Engineer-in-Charge. The scope

shall include pre-commissioning checks, insulation resistance tests, no-load and load

trials, safety/protection checks, and performance test on load bank (where directed) with

submission of test records. The contractor shall provide initial consumables including first

fill of diesel fuel (minimum up to 80% of fuel tank capacity), lubricating oil, coolant, etc.

required for commissioning and the specified tests. The bidder/OEM shall provide

comprehensive warranty/guarantee for the complete DG system (engine, alternator,

control panels, RMS, enclosure and all accessories) for a minimum period of two (2) years

from the date of commissioning/handing over, whichever is later, covering defects in

materials and workmanship. During warranty, all spares/repairs/replacements and visits

guidelines/notifications and all applicable local rules/regulations prevailing as on the

last date of tender submission applicable local rules/regulations prevailing as on the

last date of tender submission

DTP Maternity Home CHC Garbada 34 of

Item Quantities Items Description Estimated Rates Unit Total amount

Item Quantities Items Description Estimated Rates Unit Total amount

No. estimated but may In Figures In Words According to

be more or less Estimated

205 1.00 NOS (K) Continuous rating of 82.5 KVA ,BHP not less than 102 BHP 928258.68 Rupees Ninety Nine Lakh NOS

Twenty Eight Thousand

Two Hundred Fifty Eight

And Paisa Sixty Eight Only

206 1.00 NOS Providing & erecting approved make ATS panel suitable for following size of 3 phase, 63340.13 Rupees Sixty Three NOS

415 V., 50 Hz, A.C. diesel generating set complete of scope as detailed below: Thousand Three

1) Power module: Motorised Changeover switch with ATS controller, Auxiliary Hundred Forty And

contactor with NO & NC contacts with Automatic Battery Charger, indicating lamps for Paisa Thirteen Only

Generator ON, Mains ON, Load and suitable control terminals and power terminals

with neutral earthing studs.(D) ATS Panel for 75 kVA/82.5 KVA3 phase DG Set

DTP Maternity Home CHC Garbada 35 of

Item Quantities Items Description Estimated Rates Unit Total amount

Item Quantities Items Description Estimated Rates Unit Total amount

No. estimated but may In Figures In Words According to

be more or less Estimated

Fire Safety Works

216 10000.00 Ltr. Providing Erecting and Fixing Double coated PVC isi mark water tank of required 8.16 Rupees Eight And Paise Ltr.

capacity each with all naccessary fittings & Connection etc. Sixteen Only

217 15.00 No Making holes up to 50mm dia 300mm long in only RCC chamber by diamond core 377.49 Rupees Three Hundred No

cutting machine of HILTI or Equivalent including disposing the debries etc. completed Seventy Seven And

as directed by E.T.C Paise Forty Nine Only

218 20.00 No Making holes up to 100mm dia 300mm long in only RCC chamber by diamond core 772.40 Rupees Seven Hundred No

cutting machine of HILTI or Equivalent including disposing the debries etc. completed Seventy Two And Paise

as directed by E.T.C Forty Only

219 32.00 Rmt Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe ( SCH40) 148.12 Rupees One Hundred Rmt

for cold water including fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or Forty Eight And Paise

equivalent as approved by Engineer In Charge. Pipe shall be fixed on the wall with the Twelve Only

help of clamp at every two metre C/C or shall be concelled as directed including

necessary fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

220 Fire Work Rupees Nil

221 2.00 Each Providing and fixing of Glycerin filed burdon type pressure gauge, 100 mm dial and 0- 3009.30 Rupees Three Thousand Each

14 kg range with calibration certificate. Nine And Paise Thirty

222 3.00 Each Providing , fixing, testing and commissioning of 25 mm ball valve of sizes. 3672.36 Rupees Three Thousand Each

Six Hundred Seventy

Two And Paise Thirty Six

222 1.00 Each Providing & fixing pressure switch assembly with isolation valve suitable for working 8670.85 Rupees Eight Thousand Each

pressure of 10 bar. Cost shall be inclusive of providing any short pieces, nipples, Six Hundred Seventy

elbows etc as required. And Paise Eighty Five

223 2.00 Each Supplying, installing, testing and commissioning of .C.I. Dual Plate Non- return valves 11160.50 Rupees Eleven Each

with required flanges, nuts, G.I bolts and gaskets etc. complete. (PN 16 Rated.). Thousand One Hundred

100 mm dia. Sixty And Paise Fifty

224 4.00 Each Providing and Fixing of hand lever operated butter fly PN: 1.6, with CI body and D.I 8058.79 Rupees Eight Thousand Each

disc and other working parts as per IS: 13095 - 1991. With required accessories like Fifty Eight And Paise

matching flange, packings etc.complete as required. Seventy Nine Only

DTP Maternity Home CHC Garbada 36 of

Item Quantities Items Description Estimated Rates Unit Total amount

Item Quantities Items Description Estimated Rates Unit Total amount

No. estimated but may In Figures In Words According to

be more or less Estimated

225 2.00 Each Providing and Fixing of hand lever operated butter fly PN: 1.6, with CI body and D.I 6868.00 Rupees Six Thousand Each

disc and other working parts as per IS: 13095 - 1991. With required accessories like Eight Hundred Sixty

matching flange, packings etc.complete as required. Eight Only

226 50.00 Rmt Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming 2986.15 Rupees Two Thousand Rmt

to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in Nine Hundred Eighty Six

ground including welding, excavation & providing cement concrete blocks as supports, And Paise Fifteen Only

anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench

etc. of following sizes complete as required 100 mm

227 30.00 Rmt 80 mm dia 1903.85 Rupees One Thousand Rmt

Nine Hundred Three And

Paise Eighty Five Only

228 20.00 Rmt 65mm dia Rupees One Thousand

One Hundred Seventy

Four And Paise Sixty

229 45.00 Rmt 25mm dia 872.64 Rupees Eight Hundred Rmt

Seventy Two And Paise

Sixty Four Only

230 30.00 Rmt 15mm dia 422.18 Rupees Four Hundred Rmt

Twenty Two And Paise

231 60.00 Nos. Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers 488.84 Rupees Four Hundred Nos.

of rating 68 degree centigrade with required accessories : Pendent Sprinkler Eighty Eight And Paise

Eighty Four Only

232 1.00 Nos. Providing and fixing of flange ended 24922.19 Rupees Twenty Four Nos.

Foot Valve PN 16. Thousand Nine Hundred

Twenty Two And Paise

233 450.00 Kg MS Structural supprots fabircated with MS / GI Angles, tubes, pipes etc.as required for 132.61 Rupees One Hundred Kg

the panels, battery & fuel Thirty Two And Paise

tank etc. Sixty One Only

DTP Maternity Home CHC Garbada 37 of

Item Quantities Items Description Estimated Rates Unit Total amount

Item Quantities Items Description Estimated Rates Unit Total amount

No. estimated but may In Figures In Words According to

be more or less Estimated

234 4.00 Nos. Supplying and fixing Single headed external yard hydrant valve with 1 No. 63 mm dia 7568.94 Rupees Seven Nos.

instantaneous FM Gunmetal/Stainless Steel coupling and cast iron wheel, ISI marked, Thousand Five Hundred

conforming to IS 5290 (type A) with blank Gunmetal/Stainless Steel cap and chain as Sixty Eight And Paise

required :(10.1) Single headed Gunmetal Ninety Four Only

235 8.00 Nos. Supplying installing , testing and commissioning of reinforced rubber lined RRL fire 8976.88 Rupees Eight Thousand Nos.

hose of 63mm diameter 15 m length as per IS 636 binded with one set of male and Nine Hundred Seventy

female instantaneous ss coupling Six And Paise Eighty

236 4.00 Nos. Supplying Installing , testing and commissioning of SS branch pipe size of 63mm 3978.39 Rupees Three Thousand Nos.

diameter x 19mm diameter Nine Hundred Seventy

Eight And Paise Thirty

237 4.00 Nos. Providing and fixing Hose Box lockable cabinet, having central opening and 4 mm 9690.95 Rupees Nine Thousand Nos.

thick glazed glass doors (Two nos.); housing 2 no’s x 15 m long fire hose (IS:636 Six Hundred Ninety And

Type A) and one no. of branch pipe; suitably marked on the outside with the letters Paise Ninety Five Only

"FIRE HOSE" including necessary locking arrangement and shall be painted with one

coat of primer and two coats of synthetic enamel paint of approved shade.(Internal)

238 4.00 Nos. Supply, fixing, testing & commissioning of 20 mm bore and 30 meter long hose and 17545.72 Rupees Seventeen Nos.

hose reel suitable for 10 Kg/sqcm operating pressure for first aid fire fighting Thousand Five Hundred

conforming to IS : 884, with 180o full swing drum, fixing brackets, 5 mm dia shut off Forty Five And Paise

Stainless steel nozzle, connecting directly from the riser through 40 mm dia. MS Seventy Two Only

(Class C) pipe with sockets, elbows, nipples, 40x20 mm reducer, 20 dia pipe, 20 mm

dia. hand lever

operated isolating ball valve, etc.

including providing operating

239 2.00 Nos. SITC of 25mm dia Gun Metal Air Vent Valves with 25 mm dia. Ball valve and other 2376.83 Rupees Two Thousand Nos.

required accessories like nipple, socket etc Three Hundred Seventy

Six And Paise Eighty

240 175.00 Rmt Apply of Painting for aboveground lines with two coats of enamel paint (As per the 117.14 Rupees One Hundred Rmt

IS:5,Sr No: 80,ISC no-537) over one coats of Red oxide primer for above ground pipe Seventeen And Paise

line network. Fourteen Only

DTP Maternity Home CHC Garbada 38 of

Item Quantities Items Description Estimated Rates Unit Total amount

Item Quantities Items Description Estimated Rates Unit Total amount

No. estimated but may In Figures In Words According to

be more or less Estimated

241 1.00 Nos. Providing & fixing of fire brigade connection made from SS (suction collecting head) 10605.00 Rupees Ten Thousand Nos.

consisting of 2 Nos. 63 mm dia instantaneous type male couplings with built-in check Six Hundred Five Only

valves, drain valve 1 No. with flanged outlet complete with bolts, nuts and rubber

insertions as required and as per

242 6.00 Nos. Supplying & erecting carbon dioxide (CO2) fire extinguisher user of following capacity 7777.00 Rupees Seven Nos.

with necessary clamps made from 50 x 6 mm M.S. Flat with nut & bolts grouted in wall Thousand Seven

complete.[A] For 4.5 Kg Capacity Hundred Seventy Seven

243 5.00 Nos. Supply & erection of ISI marked portable fire extinguishers, wall mounted type, wall 4545.00 Rupees Four Thousand Nos.

brackets complete in all respect as per standard item with all accessories, delivery Five Hundred Forty Five

hose & nozzle wherever required, including fixing on walls as per the directions of Only

Engineer-in-charge. Water CO2 nozzle type. 9 Lt.capacity

244 6.00 Nos. Supply & erection of ISI marked portable fire extinguishers, wall mounted type, wall 6969.00 Rupees Six Thousand Nos.

brackets complete in all respect as per standard item with all accessories, delivery Nine Hundred Sixty Nine

hose & nozzle wherever required, including fixing on walls as per the directions of Only

Engineer-in-charge. ABC dry powder stored pressure type 6 Kg. capacity (IS:15683)

245 0.00 Job Charges for liasoning with CFO and getting all approvals and permissions & NOC 's 89768.80 Rupees Eighty Nine Job

required for fire fighting at various stages & after completion of the project.(All official Thousand Seven

and receipted paymentswould be submitted and Reembursed) Hundred Sixty Eight And

Paise Eighty Only

246 10.00 Nos. Fire exit signs of standard size ( Size 450 x 200 x 84 mm or nearest )(photoluminous 5612.59 Rupees Five Thousand Nos.

type.(glowing in dark type)Providing and fixing portable fire extinguishers of approved Six Hundred Twelve And

make ISI marked of following Capacity at the places shown on Drawing & mentioned Paise Fifty Nine Only

247 20.00 Nos. Providing and fixing 3mm thick PVC sheets as signage and display of health 661.55 Rupees Six Hundred Nos.

signs/information of required size having retro reflective letters/design as per Sixty One And Paise

requirement, fixing the same through approved adhesive etc. complete, work shall be Fifty Five Only

carried out as per instruction of engineer-in-charge. (Approved make PVC foamed

sheets only)(45 x 15 cms)

248 65.00 Rmt Providing, fixing, testing and commissioning of Auto Glow Signages patta For Wall 693.66 Rupees Six Hundred Rmt

and Flooring, (2" Wide) Ninety Three And Paise

DTP Maternity Home CHC Garbada 39 of

Item Quantities Items Description Estimated Rates Unit Total amount

Item Quantities Items Description Estimated Rates Unit Total amount

No. estimated but may In Figures In Words According to

be more or less Estimated

249 1.00 Nos. Supplying installing testing and commissioning electrically driven terrace 66660.00 Rupees Sixty Six Nos.

pump of capacity 900 Ipm, at 35 mtr head with all the necessary accessories Thousand Six Hundred

viz., pressure gauges etc., operating on 3ph 50 hz, 400/440V ac supply Sixty Only

including foundation, bolt etc., and complete control panel.

250 1.00 Nos. Supply and Installation of cast iron body dual check plate type NRV (non return valve) 16362.00 Rupees Sixteen Nos.

conf. to IS: 5312 PN-16, flang eend as per ANSI B 16.5, 150#, SORF, Serrated finish Thousand Three

flanged end. i)100mm Dia Hundred Sixty Two Only

Fire Ele. Work Rupees Nil

251 80.00 Rmt Supplying, laying, testing & commissioning of FRLS, PVC outer sheath, steel 228.26 Rupees Two Hundred Rmt

armoured copper conductor, 1100v grade power cables with double compression Twenty Eight And Paise

glands etc.The cables shall be laid in tray / Hume pipe / in trenches/on walls/ floor etc. Twenty Six Only

as required. For cables laid out door the rate shall include earth excavation providing

brick and sand protection, refilling and compacting the earth.The rate shall excludes

tray & Hume pipes.The minimum size of the cables shall as mentioned below:

252 30.00 Nos. SITC of Analogue Addressable Multi- Sensor which is fully compatible with Analogue 5363.10 Rupees Five Thousand Nos.

Addressable Protocol,having removable high performance chamber with Twin fire Three Hundred Sixty

LED's allow 360 degree viewing, User selectable sensitivity modes 1% to 4.5% obs/m, Three And Paise Ten

Incorporate Optical and dual Heat elements, lock mechanism (sensor to base), Only

Electronically addressed, Pulsing/non- pulsing controlled from panel.

253 30.00 Nos. supply and installation of 8" x 8 " MS Junction Box. 140.39 Rupees One Hundred Nos.

Forty And Paise Thirty

254 5.00 Nos. Supply, installation, testing and commissioning of 12V 7AH batteries. 1367.95 Rupees One Thousand Nos.

Three Hundred Sixty

Seven And Paise Ninety

255 3.00 Nos. SITC of Analogue Addressable Manual Call Point with Integral Short Circuit Isolator, 7150.80 Rupees Seven Nos.

Analogue Addressable Protocol having, Bi-coloured status LED (red for alarm, amber Thousand One Hundred

for (short- circuit), Non-frangible element fitted as standard (conforms to EN54), Fifty And Paise Eighty

pulsing/non-pulsing can selectable via panel, Electronically addressed. Only

DTP Maternity Home CHC Garbada 40 of

Item Quantities Items Description Estimated Rates Unit Total amount

Item Quantities Items Description Estimated Rates Unit Total amount

No. estimated but may In Figures In Words According to

be more or less Estimated

256 650.00 Rmt Providing & Erection cable for fire alarm system 2 Core X 1.5 sqmm FRLS armoured 174.73 Rupees One Hundred Rmt

copper Cable Seventy Four And Paise

Seventy Three Only

257 6.00 Nos. Supply, installation, testing and commissioning of Intelligent Integrated Loopbased 8938.50 Rupees Eight Thousand Nos.

Sounder with Beacon - compatible with existing panel. Nine Hundred Thirty

Eight And Paise Fifty

258 1.00 Nos. Microprocessor based intelligent ,analogue addressable type fire alarm control panel 297500.00 Rupees Two Lakh(s) Nos.

with LCD display, four access levels, event historical logging, flash EPROM sufficient Ninety Seven Thousand

numbers of programmable relay controls, 240 volts AC power supply, automatic Five Hundred Only

battery charger, including all necessary software for programming of fire alarm system

with 100% redundancy to ensure operation even in case of single component

breakdown. The job includes supply, installation, testing and commissioning of entir

system. 4 Loop.

259 4.00 Nos. Loop Mounted Isolator - compatible with existing panel 3213.00 Rupees Three Thousand Nos.

Two Hundred Thirteen

260 4.00 Nos. Supply, Installation, Testing and Commissioning of Addressable Monitor 3570.00 Rupees Three Thousand Nos.

modulecompatible with existing panel. Five Hundred Seventy

261 1.00 Nos. Supplying and erecting push button operated fully automatic Star-Delta starter with 3 14100.00 Rupees Fourteen Nos.

Nos. of 15A.rating contactors and directly operated thermal overload relay having Thousand One Hundred

10-21A range and erected in sheet steel enclosure for 3 phase 415V. 50 c/s. A.C. Only

motors from 7.5 to 15H.P. complete erected on (a) P.W. Block with necessary

connection. Cat.III

262 30.00 mtr Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium 565.00 Rupees Five Hundred mtr

conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / Sixty Five Only

pipe of following size of cables (E) 3 1/2 core 95 Sq. mm ( 50 Sq. mm 1/2 core)

263 30.00 mtr Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand 219.00 Rupees Two Hundred mtr

Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in Nineteen Only

existing trench / pipe of following size of cables(B) 4 core 25 Sq. mm

DTP Maternity Home CHC Garbada 41 of

Item Quantities Items Description Estimated Rates Unit Total amount

Item Quantities Items Description Estimated Rates Unit Total amount

No. estimated but may In Figures In Words According to

be more or less Estimated

264 2.00 nos Providing and erecting Approved make Four pole moulded case circuit breaker having 7830.00 Rupees Seven nos

breaking capacity ICU of 35 KA. at 415 V. having normal current rating 125A. with Thousand Eight Hundred

Fixed thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all Thirty Only

internal connections, spreader tinned copper & complete erected in existing 16 G.M.S.

housing. Cat-iii

265 2.00 nos Providing and erecting Approved make Four pole moulded case circuit breaker 15500.00 Rupees Fifteen nos

having breaking capacity ICU of 35 KA. at 415 V. having Normal current rating Thousand Five Hundred

200A.with variable Thermal & magnetic release suitable to work on A.C.supply 50 c/s. Only

with all internal connections, spreader tinned copper & complete erected in existing

G.M.S.housing Cat-iii

Furniture & interior Work Rupees Nil

DTP Maternity Home CHC Garbada 42 of

Item Quantities Items Description Estimated Rates Unit Total amount

Item Quantities Items Description Estimated Rates Unit Total amount

No. estimated but may In Figures In Words According to

be more or less Estimated

266 1.00 No Providing and Supplying Motorized bed. with 7 Function Bed, 6 embedded control 231488.00 Rupees Two Lakh(s) No

panel + 1 ACT panel Intensive care unit bed with back rest up down, knee rest up- Thirty One Thousand

down, Trendelenburg and reverse Trendelenburg, Hi-low position, Lateral Tilt Four Hundred Eighty

controlled through electro mechanical actuators operated using soft touch control Eight Only

panel.The embedded control panels are placed: 4 no’s at the Head boards and 2 no’s

at the Leg boards. Nurse embedded panel should have features like backrest, leg-

rest, High-low, TR/ATR, Auto CPR, Single button Cardiac chair position, Shock

position, auto-contour and Locking features.Patient embedded panel should have

features like backrest, leg-rest, High-low.. The Digital Attendant Control Touch Panel

mounted on leg-board can be used to operate functions such as backrest, leg-rest,

High-low, TR/ATR, Auto CPR, Single button Cardiac chair position, Shock position,

Lateral Tilt, auto-contour , weight measurement, Under bed light, Out of bed alarm

and Locking features.The lateral tilt feature can only be operated when the

sideboards are up / engagged to prevent patient fall, when the lateral tilt orientation is

shifting from right to left/left to rght there should be a pause of 4 seconds and beep

sound as a safety feature. Base frame is made of 30mmx 60mm 2mm thick MS CRCA

rectangular tube with the bed frame of 50x 25mm and 40 x20mm, 2mm thick MS

CRCA rectangular tube.. The embedded control panel ICCU bed has four section

lying surface with ABS vacuum formed with antimicrobial property which should be

easily removable, washable to maintain hygiene with integrated mattress retainer.The

bed has four numbers of PP moulded side boards with embedded control panels (2

no’s for Patient and 4 no’s for Attendant) and drop-down mechanism, completely

collapsible , the side boards should be air mattress comaptible and height of the side

boards should be more than 400 mm.There are 4 nos of bumpers given at the four

corners made up of TPE ( thermo plastic elastomer) with excellent shock absorbing

property.There are two nos of CPR lever, one at either side of the bed for quick

release of the back rest during emergencis. In order to achieve the Deep Vein

Thrombosis (DVT) position, the lower leg rest portion of the bed frame has the

Provision of a MS zinc plated ratchet. The ratchet is adjustable in five different

positions.Technical Details:∙ Overall Length: <2200mm∙ Overall Length (with

DTP Maternity Home CHC Garbada 43 of

Item Quantities Items Description Estimated Rates Unit Total amount

Item Quantities Items Description Estimated Rates Unit Total amount

No. estimated but may In Figures In Words According to

be more or less Estimated

267 23.00 No Providing and Supplying Fowler bed should have Overall dimension: (L) 2138 x (W) 38000.00 Rupees Thirty Eight No

908 x (H) 559mmFunctions : Two function bed with adjustable backrest 70deg and Thousand Only

upper leg rest 24deg Head board and foot board : 25.4 mm dia 1.2 mm thick ss202

made tube with 18 mm thick PLT board.Bed frame : bed frame is made of MS ERW

rectangular section tube of size 30mmx60mm of 1.6mm thick. . it has Provisionision

4 iv pole holders . It is strengthened by rectangular tube section of size 60mmx30

mm having 1.6 mm thicknessleg Under Structure : ERW round tubes used with

thickness of 1.2mm with section 31.75 mm dia.Lying surface : Lying surface made of

MS ERW of thickness of 1.0 mm thick . This lying surface have 4 sections for bed

profiling i.e. back adjustment, fixed pelvic section, upper and lower leg adjustment.

Lower leg rest section is provisioned with Ratchet for leg rest adjustment. Mattress

platform is strengthened by tubular frame of size 25.4mm dia x 1.2mm thickness. It

is strengthened by trapezoidal contour ( rounded corner ) 16 nos, embossed cut out.

All metal components are pre treated with zinc phosphating and then powder coated

with epoxy polyester powder coating. Mechanism : All functions are operated with

lead screw mechanism, ACME threaded EN8 made 6mm pitch for easy in

movement.Castors : High endurance, metal castors of 125mm dia having

Provisionision for diagonal locking with stem dia 22mm should be provisioned for

better stability.Powder coating :Anti rust, thermosetting epoxy polyester powder

coating should be used. All powder coating is in Ral White.Maximum weight

:Maximum safe working load is 135 kg.Handle : All the functions are operated with the

help of single ergonomically handle, which are made of metal inserted PP co

polymer , it's lever is snap locked when not in use. All the handles are Provided with

operating guidance stickers.welding : To ensure quid quality welding " Co2 Argon"

process is adhered to.powder coating : All metal components are pre treated with

zinc phosphating in 7 tank process and then powder coated with epoxy polyester

powder coating .].packing : goods are supplied in knocked down construction to

reduce carbon emission. In house test report : proof loading test , cycle tests , impact

test, horizontal and vertical load tests for side rails, salt spray test, castor break test,

pull test for head and foot board.The rate shall include all materials, hardware, and

DTP Maternity Home CHC Garbada 44 of

Item Quantities Items Description Estimated Rates Unit Total amount

Item Quantities Items Description Estimated Rates Unit Total amount

No. estimated but may In Figures In Words According to

be more or less Estimated

268 23.00 Nos Providing and Supplying hospital locker. The bedside locker has single drawer and 11901.00 Rupees Eleven Nos

cabinet with lock and with plastic molded handle. There is space between plastic top Thousand Nine Hundred

and the cabinet to keep the general items for the frequent use. Cabinet is One Only

Provisionided with lock to keep the valuable items for the safety. overall dimensions

should be 490mmW x 410mm D x 941mm H.Corner tube made of ERW round tube

with section 25.4 mm dia of 1.2 mm thickness.Cabinet made of CRCA sheet of

mm thick Provided with lock.( 470 mm x 410 mm x 382 mm).Top made of ABS of

mm thick. Top has recessed and contoured shape for better aesthetic and

usability.Plastic molded knob is Provisionided with Matt finish and dome shaped for

better grip.Plastic molded castors with 50 mm dia placed in diagonal locking

arrangement.RAL white, plastic parts in Grey.5 kg UDL on both the tops and 10 kg in

the cabinet.All metal components are pre treated with zinc phosphating in 7 tank

process and then powder coated with anti microbial epoxy polyester powder coating

to fulfill the requirements for bacterial protection against at least 2 commonly found

bacteria in Hospital environment [Gram positive and Gram Negative].goods are

supplied in knocked down construction to reduce carbon emission. The rate shall

include all materials, hardware, and labour etc. complete as per instruction of

engineer-in charge.

269 23.00 Nos Providing and Supplying of IV pole of saline stand. Overall dimension should be 250 4435.00 Rupees Four Thousand Nos

mm PCD with height adjustable from 743 mm to 1150 mm. it is fully SS made used on Four Hundred Thirty Five

bed with telescopic rod for height adjustment. The bottom adapted is 12 mm dia, fixed Only

tube is 15.9 mm dia , 1.6 mm thick ERW Tube. Telescopic rod is 12 mm dia ERW

tube. there are 2 nos 6 mm dia hooks to hand saline bags. Maximum load bearing

capacity is 2kg per hook.The rate shall include all materials, hardware, and labour etc.

complete as per instruction of engineer-in charge.

DTP Maternity Home CHC Garbada 45 of

Item Quantities Items Description Estimated Rates Unit Total amount

Item Quantities Items Description Estimated Rates Unit Total amount

No. estimated but may In Figures In Words According to

be more or less Estimated

270 1.00 Nos Providing and Supplying of Examination couch with full storage of Examination 41900.00 Rupees Forty One Nos

couch with full storage- Overall dimension 1975 mm (L) x 560 mm ( W) x 805 mm (H). Thousand Nine Hundred

Examination couch with three drawers with three cabinets, inbuilt step stool and BP Only

tray holder.the base frame should made of 30 mm x 30 mmX 1.6 thick ERW tube. The

cabinets should made of 1 mm thick CRCA sheet with recessed plastic handles and

with lock and plastic door latch. the hindges of the cabinet should be made of sheet

metal and pin arrangement. The internal dimension of the two sidecabinets should be

422 mm (W) x 455 mm (D) x 540 mm (H). the internal dimension of the centarl cabinet

should be 422 mm (W) x 455 mm (D) x 358 mm (H). The storage cabinet unit should

be mount tubular base frame. The head rest should be adjustable on gas spring which

should be actuated with C shaped handle lever . The drawers should made of 1 mm

thick CRCA sheet with recessed plastic handles and work on double extension ball

slides for smooth glide. the internal dimension of the drawer should be 330 mm (W) x

427 mm (D) x 92 mm (H). The mattress platform should be 65 mm thick which is

made of 12 mm thick ply and PU foam and covered with leatherite cover.the cover

should be water resistant, fire retuardant, aniti micraobial . the cover should have in-

vitro cytotoxicity test report from reputed test lab. the end of the top mattress surface

should be tapered end edge for ergonomic benifit. There should be ss304 made

tissue roll holder present on the lower side of the back rest. There should be 1 mm

thick CRCA made step stool with leveler with double extension ball slide for smooth

operation. There should be 1 mm thick CRCA made BP aparatus holder which should

be adjustable in height on a SS made height adjustable rod. Total load bearing

capacity should be 135 kg. The examination couch should be provided with six

numbers levelers made of metal and plastic for adjustment on the uneven floor. All

the metal parts should be pre treated and powder coated with epoxy polyester powder

coating.The rate shall include all materials, hardware, and labour etc. complete as per

instruction of engineer-in charge.

DTP Maternity Home CHC Garbada 46 of

Item Quantities Items Description Estimated Rates Unit Total amount

Item Quantities Items Description Estimated Rates Unit Total amount

No. estimated but may In Figures In Words According to

be more or less Estimated

271 6.00 No Hydraulic labour bed 97458.00 Rupees Ninety Seven No

Structure made up of 60x30x1.6 mm tubes with dual support system of 40x20x1.6 mm Thousand Four Hundred

tubular CRCA frame work Top made up of water proof 5 mm backlight (hi lam ) sheet Fifty Eight Only

in three pieces Upper layer and bottom layers must be jointed by single pivot

mechanism made up of 20x40 mm tubes Sliding roller mechanism for leg movement

Head portion made up with cnc made roller mechanism with gear modules system

with abs handle for up down at various positions .

Main height up down feature available with hydraulic single release system 125 mm

heavy duty castor's 1 set of lithotomic leg rest

3 sectional top with high quality cusioned work Cushioned top made with 40 density

with Rexine cover

272 23.00 No Providing and Supplying of round stool should have of round stool. Overall 1550.00 Rupees One Thousand No

dimension should be Diagonal Leg Dia 538 mm H470 min-655max. Top plate made Five Hundred Fifty Only

of SS 304 made sheet with spin section of thickness 1mm and non corrosive. It has

a diameter of 305mm, seat base made of MS ring and rectangular tube. EN8 Screw

having dia of 22 mm is used for height adjustment of the seat base. The round hub

made of MS ERW tube having dia of 38mm and thickness 2 mm. The Hub is welded

with the legs and it accommodate and cover the lead screw mechanism. The under-

structure consist of 4 legs made up of MS ERW tube of diameter 25.4 mm and

1.6mm thick. The press formed pipe leg give a round and clean look. All the legs is

Provided with 4 nos of Nylon-6 bush. All metal components are pre treated with zinc

phosphating in 7 tank process and then powder coated with epoxy polyester powder

coating . Safe working load is 135kg .The rate shall include all materials, hardware,

and labour etc. complete as per instruction of engineer-in charge.

273 4.00 No Supplying of Dust bin of approved brand Sintex or equivalent (as per photographs) of 1560.00 Rupees One Thousand No

100 Liter Capacity Five Hundred Sixty Only

DTP Maternity Home CHC Garbada 47 of

Item Quantities Items Description Estimated Rates Unit Total amount

Item Quantities Items Description Estimated Rates Unit Total amount

No. estimated but may In Figures In Words According to

be more or less Estimated

274 4.00 No Providing and Supplying STRETCHER ON TROLLEY should have Strecher on 31834.00 Rupees Thirty One No

trolley with Overall dimension should be 2005 mm (L) x 666 mm (W) x 827 mm (H). It Thousand Eight Hundred

should be removable stretcher on trolley mointed on castors.. The trolley should be Thirty Four Only

made of 31.75 mm and 25.5 mm dia 1.2 mm thick and 1.6 mm thick ERW tube.

The casters should be 200 mm dia diagonal lockable castors. stretcher understructure

should be made of 25.4 mm dia 1.6 mm thick ERW tube and the top should be made

of 1.2 mm thick CRCA sheet. The stretcher should have provision to mount IV pole at

four corners. The product should be pre treated and powder coated with Epoxy

polyster powder coating.The maximum load bearing capacity should be 135 kg.The

rate shall include all materials, hardware, and labour etc. complete as per instruction

of engineer-in charge.

275 4.00 No Providing and Supplying Foldable wheel chair should have Foldable wheel chair 16290.00 Rupees Sixteen No

with Over all dimension should be (L) 790 x (W) 600 x (H) 870mm Foldable frame Thousand Two Hundred

structure should be made of section 22x1.2mm A3 carbon steel with chrome finish. Ninety Only

Cross bar should be made of A3 carbon steel with section 25.4 x 1.2mm.The Rear

wheel should be made of 24 inch Solid mag wheels with alloy in the rim .Integrated

handrim shoud be provided to drive the wheel chair of section 16x1.2mm A3 carbon

steel with chrome finish. The front wheel should be of 8 inch HUB made of PA

polymer and outer with solid rubber. PU molded arm rest and base should be made

of ABS for better arm support .There should be Leatherite strap for calf rest and

leatherite cushion for seat. The foot rest should be Adjustable alluminimum die cast

foot rest with updown and swivel type mechanism and Push Handles should be

made of moulded rubber grip to push the wheelchair. Hand brakes should be provided

to lock the wheelchair at desired location. The finsih of chair should be antirust

chrome .The rate shall include all materials, hardware, and labour etc. complete as

per instruction of engineer-in charge.

DTP Maternity Home CHC Garbada 48 of

Item Quantities Items Description Estimated Rates Unit Total amount

Item Quantities Items Description Estimated Rates Unit Total amount

No. estimated but may In Figures In Words According to

be more or less Estimated

276 4.00 No Providing and Supplying Three-Fold partition screen should have Three-Fold 10073.00 Rupees Ten Thousand No

partition screen- Overall dimension: L 2637 X W 640 x H 1720 MM. Frame should be Seventy Three Only

made of ERW tube with movable plastic hinges. The fix frame should be made of

mm dia 1.2 mm thich ERW tube, the movable frame shouuld be made of 19.05 mm

dia 1.2 mm thich ERW tube and the leg frame should be made of 30 mm suqare tube

with 1.6 mm .thick. The fixed portion should be 1075 mm width and the movable

portion should be 778 mm width. 50 mm dia wheel castors should be provided. All MS

parts should be pre treated and powder coated with thermosetting epoxy polyester.

Green color Casement fabric must be provided for modesty.The rate shall include all

materials, hardware, and labour etc. complete as per instruction of engineer-in

277 4.00 No Providing and Supplying of OXYGEN CYLINDER TROLLEYshould have MS 4856.00 Rupees Four Thousand No

Oxygen cylinder trolley suitable for B type oxygen cylinder. The overall dimension Eight Hundred Fifty Six

should be 410 mm (L) x 375 mm (W) x 1112 mm (H). The main frame should made of Only

25.4 mm dia 1.6 mm thick ERW tube with 10 mm dia ms made locking rod to keep the

cylinder position during transit.The trolley should be provided with 100 mm dia 25 mm

thick PU wheel for longer durability. LDPE made leg bush should be provided on the

legs. Max load bearing capacity should be 50 kg.The rate shall include all materials,

hardware, and labour etc. complete as per instruction of engineer-in charge.

278 4.00 No Providing and Supplying of Instrument trolley should have ISO 13485:2016 22844.00 Rupees Twenty Two No

certificate from NABCB certified agency, CE certificate from european notified body Thousand Eight Hundred

with 4 digit registration code, ISO 9001:2015, ISO 14001:2015 and ISO 45001:2018 Forty Four Only

Certified and should be mandatorily submitted along with Bid. of Instrument trolley-

SS 304 sheet should be provided at top for the placement of the instruments being

used and also for easy in portability. SS 304 sheet should be provided at the top as

well as bottom shelf for keeping the instrument being used. Horizontal bars should be

welded with legs so as to provide protection at sides with supporting legs giving a

sturdy look.Castors of 125mm Dia. should be used for easy in movement. Overall

Dimension: 775mm X 531mm X 915mm H. Maximum safe working load must be

40kg.The rate shall include all materials, hardware, and labour etc. complete as per

instruction of engineer-in charge.

DTP Maternity Home CHC Garbada 49 of

Item Quantities Items Description Estimated Rates Unit Total amount

Item Quantities Items Description Estimated Rates Unit Total amount

No. estimated but may In Figures In Words According to

be more or less Estimated

279 2.00 No Providing and Supplying of Medicine trolley should have Medicine trolley-Overall 23986.00 Rupees Twenty Three No

dimension: - 902(L) X 532(B) X 915(H) mm. Top shelf and bottom shelf should be Thousand Nine Hundred

made of SS304 sheet with 1mm thickness and 1.2mm. Rest of the components like Eighty Six Only

supporting legs, horizontal bar handle should be made of SS 304 pipe having dia

31.8, 12.7 mm respectively. The castors of high quality plastic injected molded and

anti static having the dia of 125mm should be used.Handles made of SS 304 pipe

having section of 16mm and thickness of 1.2mm should be used.The rate shall

include all materials, hardware, and labour etc. complete as per instruction of

engineer-in charge.

280 23.00 No Providing and Supplying mayo trolly should have Mayo trolley-overall sizes of Base 10981.00 Rupees Ten Thousand No

rectangle 504mm X 655mm X Adjustable from 814mm to 1340 mm. Height Nine Hundred Eighty

adjustment will be achieved with screw knob mechanism. Bottom frame should be One Only

made of 1.2mm thick SS 304 tube of dimension 38 x 38mm square tube. Top frame

should be of 1.2mm thick and 304 SS grade rectangular shape of dimension 30 x

30mm. Fixed tube of 3 mm thickness square in shape of 38 x 38mm telescopic tube

should be used of 2 mm thickness rectangular in shape of 30 x 30mm. Locking knob

should be used ergonomically designed made of SS screw and nylon knob. Tray

supporting frame should be of thickness of 1mm. Castors must be injection molded

type of 50mm dia having high endurance, anti-static properties. Safe working load

must be 20kgs.The rate shall include all materials, hardware, and labour etc. complete

as per instruction of engineer-in charge.

281 1.00 No Supplying and installing Biomedical waste trolley of 60 Liter capacity of Best Plastic 21500.00 Rupees Twenty One No

and approved brand and selected colour etc.(As per Photograph) Sintex of Thousand Five Hundred

Equivalent.(Set of 3 Bucket) Only

DTP Maternity Home CHC Garbada 50 of

Item Quantities Items Description Estimated Rates Unit Total amount

Item Quantities Items Description Estimated Rates Unit Total amount

No. estimated but may In Figures In Words According to

be more or less Estimated

282 5.00 No Providing and Supplying crib should have Crib for infant should be made of wire 13710.00 Rupees Thirteen No

mesh crib on ms trolley.Dimension Overall size should be 892 mm (L) x 536 mm (W) Thousand Seven

x 1008 mm (H).The crib is of 16 mm and 5 mm dia 1.6 mm thick ERW tube. The Hundred Ten Only

mesh is designed to accommodate the baby to Provide ventilation and visibility.The

base frame is of 25.4 mm and 10 mm dia 1.6 mm thick ERW tube with 125 mm

individual locking castor.The maximum load bearing capacity is 20 kg.All metal

components are pre treated with zinc phosphating in 7 tank process and then powder

coated with epoxy polyester powder coating .All powder coated parts in RAL

white.Maximum patient load is 20 kg.

packing goods are supplied in knocked down construction to reduce carbon emission.

The rate shall include all materials, hardware, and labour etc. complete as per

instruction of engineer-in charge.

283 23.00 No Providing and Supplying mattress should have Mattress with overall dimension 2011.00 Rupees Two Thousand No

should be (L)615mm*(W)315mm*(H)50mm MATTRESS FOR CRIB ON BED and Eleven Only

CRIB ON TROLLEY , mattress made of 40 density pu foam. The mattress have high

end heavy helium cover which is water resistant, x ray permeable, fire retardant.The

rate shall include all materials, hardware, and labour etc. complete as per instruction

of engineer-in charge.

284 5.00 No Providing and Supplying mattress should have Mattress with Overall dimension 2950.00 Rupees Two Thousand No

should be (L)1415 mm*(W)785 mm* 75 mm(H).Mattress is with 40 density 75 mm Nine Hundred Fifty Only

thick Single section PU foam mattress which is covered by heavy helium material

which is water proof, flame retardant, vapour and X-ray permeable. The zip and

stitches for the mattress cover is concealed. The rate shall include all materials,

hardware, and labour etc. complete as per instruction of engineer-in charge.

DTP Maternity Home CHC Garbada 51 of

Item Quantities Items Description Estimated Rates Unit Total amount

Item Quantities Items Description Estimated Rates Unit Total amount

No. estimated but may In Figures In Words According to

be more or less Estimated

285 1.00 No Providing and Supplying of Emergency Crash Cart should have Advanced 62347.00 Rupees Sixty Two No

emergency cart constructed of CRCA Powder Coated MS Sheet of thickness 1.2mm. Thousand Three

overall dimension of L 1037 W x 672 H x 1435 mm. Hundred Forty Seven

Should have 5 drawers with drawer configuration: 2 small (390(L)x600(W)X71(H)mm) Only

+ 2 medium (390(L)x600(W)X149(H)mm) + 1 Large (390(L)x600(W)X227(H)mm). all

drawers should be lockable through central locking. Should have anti-tilt mechanism.

should have minimum five drawer with adjustable acrylic separators. Should have

cam lock type central locking mechanism for drawers Provided with 100 security seal

tagsShould have following accesories items.defibrillator shelf with monitor straps,

sharps container – 2qty. oxygen cylinder holder, cardiac chest board made of

compact laminate, push/pull writing surface, utility tray, document holder, catheter

holder., a waste bin discarding syringes and gloves.wire wounder and mounting

screws for spike guard.cart should have ABS vacuum formed top tray of thickness

3mm, Aluminum push handle of dia. 25mm built into the end panel for smooth stable

movement. Pullout writing surface top. cart should be light, sturdy, scratch and dent

resistant. should have 4 TPE corner bumpers for collision protection, Single wheel

front locking castors should have 125mm diameter to facilitate quiet and easy

movement. ABS grade made top sheet with 3mm thickness should be used. MS

Cylinder case should be used with 2 Velcro straps to hold the cylinder with a foam

padded base. SS 304 grade pipe of section 16mm and thickness of 1.6mm should

be used to to mount IV rod. High endurance anti-static, Aluminum handle pipe should

have section of 25mm with length of 365mm and should have thickness of 1mm

giving a glossy finish. Metal parts should be pre treated and powder coated with epoxy

polyster pwder coat. Safe working load must be 55kgs.Optional accessory: Spike

guard/Extension board.The rate shall include all materials, hardware, and labour etc.

complete as per instruction of engineer-in charge.

DTP Maternity Home CHC Garbada 52 of

Item Quantities Items Description Estimated Rates Unit Total amount

Item Quantities Items Description Estimated Rates Unit Total amount

No. estimated but may In Figures In Words According to

be more or less Estimated

286 3.00 Nos Providing and Supplying single bed with Overall Size:Width - 2050.0 mm Depth - 7250.00 Rupees Seven Nos

973.0 mm Height - 720.0 mm.Material:Headboard panels are made of 18 mm thick Thousand Two Hundred

Prelaminated Particle Board. All the exposed edges are edge banded with 2 mm thick Fifty Only

PVC edge banding.Bed leg frame structure consist of metal frames made of M.S. 50 x

25 mm box section in 1.2 thickness Internal Pipes made of 19 x 19 mm box section in

0.9 mm thickness. Headboard pipes are made of 25 x 25 mm box section in 0.9 mm

thickness. Mattress holding bkt is made of 0.6 mm CRCA SHEET Mattress frame

sheetmetal top is made of 1 mm CRCA SHEET.Hardware:The high quality hardware

used. Construction:Knock Down construction.Packets: 1 packet. Finish:18 mm thick

Prelaminated Particle Board is in 4501, make — GODREJ (SHIRVAL).Bed leg frame

structure are powder coated in shade : MATT TAUPE WHITE. REF NO. 9001904to

thickness of 50 microns (+-10). Mattress frame structure are powder coated in shade :

EPP FR TEX. MILKY WHITE 20K, REF NO. 9003456 to thickness of 50 microns (+-

10). Rest all metals are powder coated in shade : S/G CHARBROWN. REF NO.

9000605 to thickness of 50 microns (+-10).The rate shall include all materials,

hardware, and labour etc. complete as per instruction of engineer-in charge.

287 3.00 Nos Providing and Supplying side table with Overall Size :Depth — 461.0 mm Width — 4000.00 Rupees Four Thousand Nos

460.0 mm Height — 510.0 mm Material:Body panels of Bed side table are made of 18 Only

mm thick Prelaminated Particle Board 1S:12823 Class E1 (as per EN13986) .All the

exposed edges are edge banded with 0.8 mm thick PVC edge banding glued with Hot

Melt EVA glue.Drawer front are made of 18 mm thick Prelaminated Particle board

1S:12823 Class E1 (as per EN13986). Hardware:The high quality hardware used like

Roller slides, Hinges , minifix, dowels is of make Hettich.Construction:Knock Down

construction.Packets :1 packet.Finish :.18 mm thick PrelaminatedParticle Board

1S:12823 Class E1 (as per EN13986) is in Imperial Oak shade.Lipping shade is 299P

MAKE REHAU.The rate shall include all materials, hardware, and labour etc.

complete as per instruction of engineer-in charge.

DTP Maternity Home CHC Garbada 53 of

Item Quantities Items Description Estimated Rates Unit Total amount

Item Quantities Items Description Estimated Rates Unit Total amount

No. estimated but may In Figures In Words According to

be more or less Estimated

288 2.00 Nos Providing and Supplying glass door storwel . Glass Door Storwel shall have an 16000.00 Rupees Sixteen Nos

overall size of 916mm(W)x486mm(D)x1980mm(H) with welded construction. It Thousand Only

should have shelf thickness of 0.7 mm, Back thickness of 0.8mm, Door thickness of

0.8mm (high yield strength) and all other components shall have a thickness of

0.9mm. These components shall be made of CRCA ‘D’ grade high yield strength as

per IS:513. The glass door storwel shall have a brass handle and a 2 way locking

mechanism with shooting bolt . It should have a height wise adjustable shelf

mounting which shall have a Uniformly Distributed Load Capacity of max 40 Kg. It

should also have a M10 Screw type Leveller with Hex plastic base. The finishing shall

include Epoxy powder coated to the thickness of 50 microns (+/- 10). Plenty of colour

options and shelving options shall be available.The rate shall include all materials,

hardware, and labour etc. complete as per instruction of engineer-in charge.

289 1.00 Nos Providing and Supplying main table with ERU ..Supplying and placing in position 19270.00 Rupees Nineteen Nos

Main Table with ERU of the following specifications. Its size shall be 1650 Width x Thousand Two Hundred

700 Depth x 743 Height (Main Desk) 1000 Width X 450Depth X 743 Height Seventy Only

(ERU).Top shall be of 18 mm thickness made of PLT board with 2 mm Edge banding.

Wenge and savannah Maple PLT board shall be used. The Understructure shall be in

pre-laminated panels made with PLT boards . 2- Drawerand 3 - Drawer storage units

with different combinations to support tops made with 18 mm PLT boards of different

colours.Modesty and back panels made with 18 mm PLT boards. The pedestals /

storages shall be fitted with necessary locks. The rate shall include all materials,

hardware, and labour etc. complete as per instruction of engineer-in charge.

290 4.00 Nos Providing and Placing Slotted Angle Rack : 1300 W X 500 D X 1895 H mm. To be 8500.00 Rupees Eight Thousand Nos

provided with 5 Shelves. Blotless Rack made of CRCA Steel. Five Hundred Only

DTP Maternity Home CHC Garbada 54 of

Item Quantities Items Description Estimated Rates Unit Total amount

Item Quantities Items Description Estimated Rates Unit Total amount

No. estimated but may In Figures In Words According to

be more or less Estimated

291 1.00 Nos Providing and Supplying Leatherette chair with High Back Chair. SEAT/BACK 20500.00 Rupees Twenty Nos

ASSEMBLY : The Cushioned seat should be made of Injection molded Plastic outer Thousand Five Hundred

and inner. Plastic Inner should be upholstered with pure leather and moulded High Only

Resilience (HR) Polyurethane foam of Density 45±2 kg/m3,and hardness load 16 ±

kgf for 25 Percent compression.The Cushioned back should be made of PU Foam

with insitu molded MS E.R.W Round Tube of size 1.9±0.03cm x 0.16 ±0.0128cm. It

upholstered with Pure Leather.Seat SIZE : 47.6 cm. (W) x 49.2 cm. (D)BACK SIZE :

47.5 cm. (W) x 77 cm. (D)ARMRESTS: The armrest top should be moulded from

polyurethane(PU), upholstered in pure leather and mounted on to a drop lift adjustable

type tubular armrest support made of 03.81±0.03 cm x 0.2±0.01 cm thk M.S E.R.W

tube having chrome plated finish.The armrest height adjustable up to 6.5±0.5cm in

steps.ACTIVE BIO-SYNCHRO MECHANISM: The adjustable tilting mechanism

should be designed with the following features:• 360° revolving type.• Front-pivot for

tilt with feet resting on ground and continuous lumbar support ensuring more comfort.•

Tilt tension adjustment can be operated in seating position.• 5-position Tilt limiter

giving option of variable tilt angle to the chair.• Seat/back tilting ratio of 1: 2• The

mechanism housing should be made up of HPDC Aluminium black powder

coated.SEAT DEPTH ADJUSTMENT: Seat depth adjustment should be integrated in

the seat through a sliding mechanism. Seat depth adjustment range should be of

6.0±0.5 cm.ADJUSTABLE BACK SUPPORT: Back Frame should be connected to

the Up/Dn mechanism housed in Plastic T spine. It can be adjusted in the range of

7.42±0.5 cm for the comfortable back support to suit individual need.PNEUMATIC HT.

ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of

10.0±0.3 cm.PEDESTAL ASSEMBLY The pedestal should be High Pressure Die cast

polished Aluminium and fitted with 5 nos. twin wheel castors. The pedestal should be

65.0 ± 0.5cm. pitch-center dia.(75.0 ± 1.0cm. With castors.)TWIN WHEEL

CASTORS:The twin wheel castors should be injection moulded in Black

Polypropylene. Overall Dimensions of Chair-Seat Height -44.5 to 54.5 cm.Height -

114.0-131.5 cm.Width and Depth of Chair as measured from base - Width-76.1 cm

and Depth-76.1 cmThe rate shall include all materials, hardware, and labour etc.

DTP Maternity Home CHC Garbada 55 of

Item Quantities Items Description Estimated Rates Unit Total amount

Item Quantities Items Description Estimated Rates Unit Total amount

No. estimated but may In Figures In Words According to

be more or less Estimated

292 3.00 Nos Providing and Supplying Leatherette chair office chair.SEAT/BACK ASSEMBLY: 4810.00 Rupees Four Thousand Nos

The seat and back should be made from seasoned wood and plywood. The same Eight Hundred Ten Only

should be upholstered with black synthetic leather and polyurethane foam.BACK

SIZE: 46.0cm. (W) X 27.0cm. (H) SEAT SIZE: 46.0cm. (W) X 40.0cm. (D).ARMREST

TUBE: The armrest tube should be made of 0 2.54 ±0.03cm. x 0.2 ±0.016cm.thk.

M.S. E.R.W. tube and powder coated (DFT 40-60 microns).UNDERSTRUCTURE

ASSEMBLY: The understructure assembly should be a cantilever type frame made of

0 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. M.S. E.R.W. tube and powder coated (DFT 40-

60 microns).Overall Dimensions of Chair-Seat Height - 48.0 cm.Height -

87.5cm.Width and Depth of Chair as measured from base - Width-58.0 cm and

Depth-56.5 cm.The rate shall include all materials, hardware, and labour etc.

complete as per instruction of engineer-in charge.

DTP Maternity Home CHC Garbada 56 of

Item Quantities Items Description Estimated Rates Unit Total amount

Item Quantities Items Description Estimated Rates Unit Total amount

No. estimated but may In Figures In Words According to

be more or less Estimated

293 12.00 Nos Providing and Supplying public seating. SEAT SHELL : The Seat is made from high 20500.00 Rupees Twenty Nos

density self-skin Polyurethane foam reinforced with 1.2 mm M.S. perforated sheet Thousand Five Hundred

insert. The Polyurethane foam having density of min. 350 kg/m3 with a Shore 'A' Only

hardness of 60±10.SEAT SIZE : 52.0 cm (W) x 50.5 cm (D)BACK SHELL : The Back

is made from high density self-skin Polyurethane foam reinforced with 1.2 mm M.S.

perforated sheet insert.The Polyurethane Foam having density of min. 350 kg/m3 with

a Shore 'A' hardness of 60±10.BACK SIZE : 52.0 cm (W) x 53.5 cm (H)CROSS BEAM

: Cross Beam made up of Diamond shaped double wall Extrusion of Aluminum 6063-

T6 Alloy with coated of 50 micron epoxy polyester coating and fitted with

Polypropylene Copolymer engineering plastic end caps.CROSS BEAM SIZE : 11.3 cm

(W) x 9.4 cm (H) X 0.4 cm (Thickness).LEG : Legs are made up of High pressure

Aluminum ADC12 Die cast coated with 50 micron epoxy polyester coating, Leg Are

fitted with soft grip PVC level adjusting shoes.ARMREST : Armrest are made up of

High pressure Aluminum ADC12 die cast coated with 50 micron epoxy polyester

coating.SEAT SUPPORT BRACKET Assembly : Seat support bracket assembly made

up of argon shield welding of Hot Rolled Steel (IS: 2062) 0.3cm Thickness. This

welded structure is coated with 50 micron epoxy polyester coating.CLAMPING

BRACKET : Clamping bracket are made up of Hot Rolled Steel (IS: 2062) 0.3cm

Thickness coated with 50 micron epoxy polyester coating.Overall Dimensions of Chair-

Seat Height - 42.5 cm.Height - 87.0 cm.Width-165.5cm and Depth-66.5 cm.The rate

shall include all materials, hardware, and labour etc. complete as per instruction of

engineer-in charge.

294 1.00 Nos Providing and Supplying Green certified center table should be mandatorily 4350.00 Rupees Four Thousand Nos

submitted along with Bid. of coffee table. CENTER TABLE GLASS: It is 10 ±0.3 mm Three Hundred Fifty Only

thick black tinted Toughened glass UV glued with bushes made in SS 202 grade for

focing with understructure. CENTER TABLE UNDERSTRUCTURE: It is a welded

Assembly made in SS202 gradeDia. 12±0.04 as per IS:1762.Width of table Equal

112.0 cm, Depth Equal60.0 cm, height Equal34.9 cm.The rate shall include all

materials, hardware, and labour etc. complete as per instruction of engineer-in

295 3.00 Nos Supplying and Placing Slotted shoe Rack : 900 W X 300 D X750 H mm. To be 2250.00 Rupees Two Thousand Nos

provided with 4 Shelves with SS 304 grade supporting legs, horizontal bar is made of Two Hundred Fifty Only

SS 304 pipe having dia 31.8, 25 mm respectively.

DTP Maternity Home CHC Garbada 57 of

Item Quantities Items Description Estimated Rates Unit Total amount

Item Quantities Items Description Estimated Rates Unit Total amount

No. estimated but may In Figures In Words According to

be more or less Estimated

296 60.00 sqmtr Providing and Placing of Manual Roller blinds having Aluminum Roller tube along with 765.00 Rupees Seven Hundred sqmtr

fabric pasted on it with glue having control unit for manual operations and bottom bar Sixty Five Only

Aluminum powder coated for weight purpose, including fabric, fitting and accessories

of approved make and colour etc. complete.Vista/Hunterdouglas or equivalent.

Fabric to be approved by architect

297 15.00 Nos Providing and Placing of Dust bin of approved brand Sintex or equivalent (as per 720.00 Rupees Seven Hundred Nos

photographs)of 5 Liter Capacity Twenty Only

298 23.00 Nos Providing and Placing of Chart holder for holding the chart which can be hanged on 700.00 Rupees Seven Hundred Nos

the side of beds. Material:‐ CRCA 0.6mm Thickness powder coating:All metal Only

components should be pre treated with zinc phosphating in 9 tank process and then

powder coated with anti microbial epoxy polyester powder coating

299 15.00 Nos Providing and Placing Photo with Frame, Size : 600 X 400 Providing and Fixing Photo 2000.00 Rupees Two Thousand Nos

Frame made of Teakwood Border Patti of size 25x25 with melamine polish finish with Only

3 mm glass and inside the picture on Photo paper with high resolution picture quality

and sticked on MDF as selected by engineer‐in‐charge including all necessary fixture,

fasteners,labour , material etc comp.

300 6.00 Nos Providing and Placing Ajanta Make : Wall Clock Provinding and fixing Ajanta make 531.00 Rupees Five Hundred Nos

wall clock of the desired shape and design as selected by engineer in charge Ajanta Thirty One Only

301 20.00 sqmtr Providing and Placing Kitchen Platform Providing and Fixing kitchen storage made of 13000.00 Rupees Thirteen sqmtr

18mm thick BWR plywood with 1mm thick laminate finish.drawers and shutter made Thousand Only

of 18mm thick BWR plywood with 1m thick laminate finish.Drawer run on telescopiec

chennal and shutter hanging on auto hinges with all necessary hardware

included.Kitchen under storage

DTP Maternity Home CHC Garbada 58 of

Item Quantities Items Description Estimated Rates Unit Total amount

Item Quantities Items Description Estimated Rates Unit Total amount

No. estimated but may In Figures In Words According to

be more or less Estimated

302 1.00 Nos Providing and Placing Alkosign Make : Key Cabinet 40 keys Providing and fixing 4780.00 Rupees Four Thousand Nos

Steel Back key cabinet for 40 keys having overall size of 520mm (W) x 50mm (D) of Seven Hundred Eighty

500mm (H) of 13mm Anodised aluminum single and double frames. Back steel Only

sheet is grey colour powder coated with 40 nos punched holes for key chain with steel

wire rings numbered 1 to 40 having corners of ABS in grey colour. Cabinet should with

1 no of lock with 2 nos of keys and top cover in 3 mm thick acrylic sheet including all

neceassary fixture, faster, fittings, labours material machniary etc complete as

selected and directed by engineer incharge Approved make:

scholar/pearl/alkonsign/elora Key Cabinet

: size : 520mm x 500 mm

303 18.00 Nos Providing and Supplying storage with Overall Dimensions of Store Up 600 W MAIN 9221.00 Rupees Nine Thousand Nos

BOND WHT shall be 600 mm W x 326 mm D x 785 mm H . The Construction shall be Two Hundred Twenty

aesthetically appealing completely knock down construction made from 0.6 mm thk. One Only

CRCA as per IS - 513 . Horizontal stiffener shall be made from 1.2 mm thk. CRCA as

per IS - 513 . The doors shall be made from 18 mm thk. interior grade pre-laminated

board as per IS - 12823 or 18 mm thk . Plain particle board as per IS -3087 with

thk. with 0.6 mm thk. decorative laminate and 0.6 mm thk. backing laminate as per IS -

2046 on either side . All edges shall be duly sealed with 2 mm thk. PVC edge banding

. Two door with single lock on RH door . Locking shall be 10 lever cam lock lever at

the bottom of the door .Shelving shall be Heightwise adjustable shelf 1 no. Uniformly

distributed load capacity of 25 Kg UDL .The finish shall be Epoxy powder coated to

the thickness of 50 microns .Overall Dimensions of Store Up 600 W WDN DOOR HL

PINE shall be 298 mm W x 18 mm D x 783 mm H RH side door with lock.298 mm

W x 18 mm D x 783 mm H LH side door w/o lock . The doors shall be made from

18 mm thk. interior grade pre-laminated board as per IS - 12823 or 18 mm thk . Plain

particle board as per IS -3087 with 0.6 thk. with 0.6 mm thk. decorative laminate and

0.6 mm thk. backing laminate as per IS - 2046 on either side . All edges shall be duly

sealed with 2 mm thk. PVC edge banding . It shall have two door with single lock on

RH door . The rate shall include all materials, hardware, and labour etc. complete as

per instruction of engineer-in charge.

DTP Maternity Home CHC Garbada 59 of

Item Quantities Items Description Estimated Rates Unit Total amount

Item Quantities Items Description Estimated Rates Unit Total amount

No. estimated but may In Figures In Words According to

be more or less Estimated

304 4.00 Nos Providing and Supplying Eco wooden storage range comprises of a range of Low 18000.00 Rupees Eighteen Nos

height to medium heightwooden HDU and SDU as per attasched DMX drg.Body : Thousand Only

Body is made from 18mm PLB with all the edges sealed with 0.8 mm thick PVC

Edgeband. The Back panel is 9mm White PLT. The entire construction is ready to

assemble unit and is assembled with suitable KD fittings.The shelves and separator

panels ( if available ) is made from 18 mm white PLT and edges are sealed with

mm edge band. The bottom shelf is fixed and other shelves have one step adjustment

for optimizing the space. Doors : Door Panels ae made from 18 mm PLB with 2 mm

Edge band on alledges ad a flush Plastic handle is fitted vertically at the center of the

door. The hinge door has suitable hinges and HDU is fitted with an adjustable fitting

for height adjustment. The SDU runs in a PVC track mounted on the TOP and Bottom

panel of the Body. HDU has a three point lock and SDU has a push type lock.All the

storages are fitted with a 6 mm leveler at bottom for leveling.The rate shall include all

materials, hardware, and labour etc. complete as per instruction of engineer-in

305 3.00 Nos Providing and Placing Single Bed Mattress ,pillow,bedsheet with pillow cover ,with 9558.00 Rupees Nine Thousand Nos

12mm thick prelam mdf back‐ 900x1950x100mm ‐ goldline plus pu form 40 density Five Hundred Fifty Eight

300 gsm cottan satin quilt cover.Mattress back putti made of 12mm thick prelam mdf Only

bothside white finish.Kurlon dew pillow 600x400 Fill: Polyester Fibre Quality of shell

fabric: 110 GSM cotton satin patti Outer Shell Layer: Cotton Fill Weight (in gms):

650.Bedsheet with pillow 100 Percent cotton of bombay dyeing or eq.

306 4.00 No Providing and Fixing 3 Seater Pero Cross Beam made of black powder coated regular 11475.00 Rupees Eleven No

MS ERW tube having 8.0+/-0.03 cm x 4.0 +/- .03 cm x 0.2 +/- Thousand Four Hundred

0.014 cm size. Legs to be chrom plated made of rolled steel with 0.12 +/- 0.013 cm Seventy Five Only

thinkness.Seat and Back Shell to be peforated made from cold rolled M.S. Sheet (DIN

1623 Part 1 ST -12 Grade), 0.14 +/- 0.013 cm thickness. The side Bar is made of

chrome Plate solid steel 3.0 cm +/- 0.03cm x

1.2 cm +/- 0.03 cm with fluting and plastic inserts. The Shell to be assembled on the

cross beam with help of M8 Bolts.

DTP Maternity Home CHC Garbada 60 of

Item Quantities Items Description Estimated Rates Unit Total amount

Item Quantities Items Description Estimated Rates Unit Total amount

No. estimated but may In Figures In Words According to

be more or less Estimated

307 1.00 No Providing and Placing inquiry counter with Worksurface of size W - 3665 X D 1060 X H 61200.00 Rupees Sixty One No

750 Worksurface and 1350 counter made of - Decorative Laminate Particle board 25mm Thousand Two Hundred

thick. Inside radius 700.0 mm outside radius – 1350.0 mm Depth – 650 mm. Rubberized Only

cork – 18mm thick. should have Glass Frosted of10mm thick Diamond cut finishing on

edges. Inside Radius – 1202.5mm Outside radius – 1402.5mm Depth – 200mm *Note:

Angle sustained within arc surface is 60 deg.Understructure should have Modesty Panel

MS Perforated sheet Below Worksurface : 0.8 mm (thick) x 665.0mm (height) x 1345.0 mm

(flat length) Above Worksurface : 0.8mm (Thick) x 260 mm (height) x 1345.0 mm (flat

length). Legs MS tube 1.6 mm thick Diameter 50.8 mm Height 604 mm.

308 8.00 No Providing and Supplying of Stool Mch Ht Adj + back Hi Base. 1) SEAT ASSEMBLY: The 3500.00 Rupees Three Thousand No

seat should be made up of 1.2±0.1cm thick flat plywood and with moulded Polyurethane Five Hundred Only

foam and should be .upholstered with replaceable synthetic leather covers.SEAT SIZE:

Diameter 40.0 cm ADJUSTMENTS: 360° Revolving type 2) BACK. ASSEMBLY: The back

foam should be designed with contoured Lumbar support for extra comfort. The

upholstery should be available in synthetic leather. *BACK SIZE: 45.0 cm (W) covered

with polyurethane foam 3)HIGH RESILIENCE (HR) POLYURETHANE.

AM:The_HR.polyurethane foam should be _moulded with density Equal 45 +1-2 kg/m3

and Hardness load 16 ± 2 kgf for 25 Percent compression4)HEIGHT ADJUSTMENT: The

manual height adjustment should be very easy to operate with a help of a knob.. It can be

easily locked at the most comfortable position. 5)PEDESTAL ASSEMBLY: The five-prong

pedestal should be fabricated from 0.2 ± 0.02 cm :thick HR sheet.( should be :. DD 1079 /

HR ), powder coated ( DFT 40-60 microns ) and fitted with an injection moulded black

Polypropylene Hub Cap and 5 nos. twin wheel castors. The pedestal-should be

55.0±0.5cm pitch-circle-diameter- (65.0±-1,0cm-with-castors).-Circular-foot-ring of

052.0±0.2cm made up of 01.9±0.2 x 0.12±0.0096cm thk MS ERW Tube for foot support in

High-base stool. 6)TWIN WHEEL CASTORS: The twin wheel castors should be injection

moulded in Black Nylon. Width- 65.0cm, Depth- 65.0 cm, Height- 88.0cm to 99.5cm Seat

Height- 67.0 to 78.5cm. The rate shall include all materials, hardware, and labour etc.

complete as per instruction of engineer-in charge.

MGPS Works Rupees Nil

309 100.00 MTRS Medical Grade Copper Pipe Kite marked : as per tender technical specifications 1736.00 Rupees One Thousand MTRS

28mm OD X 0.9mm thick Seven Hundred Thirty

DTP Maternity Home CHC Garbada 61 of

Item Quantities Items Description Estimated Rates Unit Total amount

Item Quantities Items Description Estimated Rates Unit Total amount

No. estimated but may In Figures In Words According to

be more or less Estimated

310 25.00 MTRS Medical Grade Copper Pipe Kite marked : as per tender technical specifications 1058.40 Rupees One Thousand MTRS

22mm OD X 0.9mm thick Fifty Eight And Paise

311 38.00 MTRS Medical Grade Copper Pipe Kite marked : as per tender technical specifications 862.40 Rupees Eight Hundred MTRS

15mm OD X 0.7mm thick Sixty Two And Paise

312 25.00 MTRS Medical Grade Copper Pipe Kite marked : as per tender technical specifications 649.60 Rupees Six Hundred MTRS

12mm OD X 0.6mm thick Forty Nine And Paise

313 25.00 NOS Gas Outlet Points/ Terminal Unit : As per tender technical specifications. a.Oxygen as 2912.00 Rupees Two Thousand NOS

er IS/ISO : 2008 IS/ ISO 7396-1 2016 HTM 02-01 ClassII b MDR 2017/745 Nine Hundred Twelve

314 25.00 NOS Matching Probe/adopter As per tender technical specifications. a.Oxygen 784.00 Rupees Seven Hundred NOS

Eighty Four Only

315 2.00 NOS Single gas digital alarm with NIST BS EN ISO 7396-1 2016 . HTM 02-01 part A&B EN 18480.00 Rupees Eighteen NOS

60601 -1 Thousand Four Hundred

316 30.00 NOS Oxygen Flow meter with Humidifier Bottle - As per tender technical specifications as 3584.00 Rupees Three Thousand NOS

per IS/ISO 15002: 2008 +AM 1: 2019 IS/ ISO 7396-1 2016 HTM 02-01 ClassII b MDR Five Hundred Eighty

2017/745 Four Only

317 25.00 NOS Isolation Lockable line valves with stub fittings :As per technical specifications. 15mm 3920.00 Rupees Three Thousand NOS

Nine Hundred Twenty

318 2.00 NOS Isolation Lockable line valves with stub fittings :As per technical specifications. 22 mm 5376.00 Rupees Five Thousand NOS

Three Hundred Seventy

319 4.00 NOS Isolation Lockable line valves with stub fittings :As per technical specifications. 28 6720.00 Rupees Six Thousand NOS

mm Seven Hundred Twenty

320 2.00 NOS 5x5 Oxygen Cylinder Manifold system with header 100800.0 Rupees One Lakh(s) NOS

Eight Hundred Only

DTP Maternity Home CHC Garbada 62 of

Item Quantities Items Description Estimated Rates Unit Total amount

Item Quantities Items Description Estimated Rates Unit Total amount

No. estimated but may In Figures In Words According to

be more or less Estimated

321 2.00 NOS High flow piston Regulator IS/ ISO 7396 IS/ISO 10524-2 -2016 , IS/ISO 10524-4:2008 13216.00 Rupees Thirteen NOS

HTM 02-01 ClassII b MDR 2017/745 Thousand Two Hundred

Total cost of Civil & Electrical+ Fire+ Furniture & interior+ MGPS work Rs.

Rupees Three Crore Seventy Eight Lakh(s) Twenty Seven Thousand One Hundred Sixty Two And Paise Eighty Eight Only

I/We am/are willing to carry out the work at % above/below percent (Should be written in figures and words) of the estimated rate mentioned above. The

amount of my/ our Bid works out as below.

Amount of My / our Tender Work out as under.

* Estimated amount put to Bid ________________________ Estimated amount put to Bid

ADD___________% ABOVE Deduct.___________% below

Nett Amount Nett Amount

* (Please strike out whichever not applicable.)

1) All the works shall be carried out as per public work deptt. and book and other specifications of the division or as directed.

2) All the columns in the contractor be filled in ink and the total entries in the last columns should be struck by the contractor under his signature.

3) Rate quoted include clearance of site ( prior to commencement of work and its close) in all respects and held good for work under all conditions

site moisture weather etc. )

4) GST at 2% Value of Workdone shall be Recovered from Contractors Bill

5) To be continued on additional sheets, if found necessary

Quantity, rates & wording of items are as per estimates and calculation in the schedule " B " are arithmetically checked and found correct.

Deputy Executive Engineer Executive Engineer

Project Implementation Unit Zone-6 Project Implementation Unit Zone-6

DTP Maternity Home CHC Garbada 63 of