BID DOCUMENT FOR PAVER BLOCK, CC ROAD & STREET LIGHT WORK IN VARIOUS AREA OF KARAMSAD ANAND MUNICIPAL CORPORATION

// SCHEDULE - B //

Name of Work :- Bid Document for Paver Block, CC Road & Street Light Work In Various Area Of Karamsad Anand Municipal

Estimated Estimated Rates Total Amount

Estimated Estimated Rates Total Amount

but may be Item of Work Unit According to

more or estimated quantities

less In Figure In Word

Dismentaling tiled of stone floors laid in mortar including

Rupees Forty Nine and

1 2823.40 stacking of serviceable materilas and disposal of 49.12 Smt

Twelve Paisas Only

unserviceable materials with all lead and lift.

Demolition and disposal of unserviceable materials with all Rupees Six Hundred

2 16.00 lead and lift.(i) Lime concrete. 623.02 Twenty Three and Two Cmt

Providing and filling sand behind abutments and between Rupees Five Hundred

3 89.44 returns in layers as directed 562.08 Sixty Two and Eight Cmt

Box cutting the road surface to proper slope and camber

Rupees One Hundred

formaking a base for road work including removing the

4 2206.65 109.41 Nine and Forty One Cmt

excavatedstuff and depositing on the road side slope as

directed upto50Mt.lead.

Carting of debris, ruff kota ston, earth or any wastage

material on site including loading, unloading within anand Rupees Seventy Six and

nagarpalica area as directed by engineer - in- charge. (a) Sixty Four Paisas Only

Providing, Laying, spreading and compacting graded stone

aggregates 150 mm compacted thick wet mix macadam

[using B.T. M.C. aggregates - 22.4 to 53 mm (30%), 11.2 to

22.4 mm (20%), 2.36 to 11.2 mm (27.5%), Stone dust below

2.36 mm size (22.5%) - 1.32 times loose volume / Cmt. of Rupees One Thousand

compacted volume], as per M.O.R.T. & H. specification Two Hundred Eighty

including premixing the material with water at OMC in Two and Fifty Five Paisas

mechanical mix plant, carriage of mixed material by tippers Only

to site, laying in uniform layers with mortar grader in sub

base / base course on well prepared surface and compacting

with vibratory roller to achieve the desired density.

Providing and laying cement concrete 1:4:8 (1-cement : 4-

Rupees Two Thousand

Coarse sand : 8-hand broken stone agreegates 40 mm

Seven Hundred Sixty

7 403.00 nominal size) and curing complete excluding cost of 2769.69 Cmt

Nine and Sixty Nine

formwork in (A) foundation and plinth.

Rolling and consolidating water bound macadam (except

laterite and Kankar) including watering not exceeding

150mm thickness (Main layer including binding materials)

Rupees Twenty Two

8 4022.00 including filling in depressions which occur during the 22.05 Smt

and Five Paisas Only

process.(A) With power roller exceeding 8 tonne and not

exceeding 12 tonne. (For PCC)

Providing TMT Bar FE 500D reinforcement for R.C.C. work Rupees Seventy Seven

9 1431.00 including bending, binding and placing in position complete 77.29 and Twenty Nine Paisas Kg

upto floor two level Only

Providing and laying in position cement concrete 1:1.5:3 (M-

200) (1- Cement, 1.5-course sand, 3-graded aggregate) and

curing complete excluding the cost of reinforcement for

R.C.C work in Road by Trimix method by providing and

Fixing 'C' channels of 150mm x 150mm as per required level

slope and thickness of concrete road levalling of placed Rupees Five Thousand

concete with surface vibrator finishing the surface with One Hundred Eighty

power floater and trowel ligh brooming on the surface Three and Thirty Two

including providing and filling expansion joint having size Paisas Only

20mm x 20mm as per manufactures spacification and

making construction joint 3mm x 20mm by using concrete

cutter machine along with chemical surface hardner

2.00kg/smt as per direction of the engineer-in-charge. etc.

Rising existing mainhole chamber with required all matrials

Rupees One Thousand

and labour after that refitting mainhole fram and cover as

11 23.00 1515.00 Five Hundred Fifteen Nos.

per direction of enginer in charges etc. compete.

Providing and fixing pre-cast Rubber Dye /steel Dye inter

locking concrete block 60mm thick with grade of concrete

M300 pnumatic compressed / vibrated mechanically and as Rupees Seven Hundred

12 6912.60 per approved design Confirming to IS 15658:2006 including 706.93 Six and Ninety Three Smt

35mm Sand layer for levelling and filling the joint with sand Paisas Only

in proper line and levelas per guidlines of IRC : SP 63-2018

Providing and fixing pre-cast concrete kerb stone of gray

cementbased concrete block 30cm length,30cm height and

Rupees Three Hundred

15cm thick ofM250 grade concret as per approved design

13 581.10 374.92 Seventy Four and Ninety Rmt

and includingexcavation for fixing in proper line and

Two Paisas Only

level,filling the joint withC:M 1:3 (1cement:3fine sand) etc

Providing and laying cement concrete 1:2:4 (1-Cement : 2.,.

Coarse sand : 4- graded stone aggregates 20 mm nominal

14 26.00 size) and curing complete excluding cost of formwork in (A) 3757.61 Cmt

Hundred Fifty Seven and

Foundation and Plinth {upto 10 ton)

Sixty One Paisas Only

Supplying and erecting approved make Octagonal pole

made from HR sheet steel. The pole should be made as per

IS. and shall be coated with hot dip galvanizing as per IS

2629/2633/4759, suitable suspend local wind speed with

integral Junction box consist of terminal plate of min 6mm

Hylam sheet, standard profile 35mmX7.5mm Din-Rail for

MCB Mounting, stud type terminal and arrangement for Rupees Five Thousand

15 8.00 cable termination to be erected With Suitable foundation 5556.01 Five Hundred Fifty Six Nos.

(Included) as per details given by manufacturer considering and One Paisas Only

site requirement. (B) 4 Mtr. Long 70 mm Top X 130 mm

bottom dia, 3 mm thickness with 200mmX200mmX12mm

base plate, 4-M16 Bolts and 450mm long with necessary G.I.

J Bolts .Approx weight 37 kg

Providing and erecting Street Light pole bracket comprising

main B Class MS pipe of 4.2 cm/require outside dia.

complete with suitable B Class M.S. sleeve tubing of approx.

45cms.length and suitable for 76.5 mm /80mm / required

size of pole top having sufficient fasteners for fixing the Rupees Six Hundred

16 8.00 brackets and having spread of 1.5.mtr. length with 110 626.20 Twenty Six and Twenty Nos.

deg.with vertical plane & suitable welded stays, reducer and Paisas Only

with check nuts complete painted with one coat of Red

oxide / PU base primer and two coats of Aluminium / PU

paint. paint with following nos of arms.[A] Single Arm

Bracket 1.5 Mtr

Supplying and erecting LED street light / Flood light fittings

with High power White LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency more than 130 lm/w

and corrosion free High pressure die cast aluminum housing

with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses,

with toughened glass with company mark/name engraved

or embossed 160 to 270 V,Power Factor more than 0.95, Rupees Six Thousand

17 8.00 THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, 6566.01 Five Hundred Sixty Six Nos.

Luminaire efficacy> 100 lumens/watt . LED driver efficiency > and One Paisas Only

85 %.( fittings required LM-79 & LM-80 certificates)(NOTE:

Below description have shown ranges of Wattage capacity of

LED fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.) (A) Street Light (IP-65),

Surge protection -4KV integral and ,Light must have 440VAC

line supply with over-voltage protection. (iv) above 90 to

Providing & erecting 240 V MCB double pole switch for

Rupees Two Hundred

lighting Load (B Curve) having 10 KA breaking capacity &

18 8.00 281.55 Eighty One and Fifty Nos.

confirms to IS : 8828 in existing box having following

Four Paisas Only

capacity a) 6 to 32 Amp. Cat - III

Providing 1:2:4 cement concrete foundation & 70% PCC

from bottom including excavation for the pole of size 60 x

Rupees One Thousand

60 x 120 cm. Deep in below ground level with plinth of

Two Hundred Ninety

19 8.00 cms x 45 cm (or 45 cms dia x 45 cms) high upper ground 1292.80 Nos.

Two and Eighty Paisas

level with necessary curing and finishing in approved

manner. (For 7.5 & 8/8.5 Mtr. Pole). a) 6 to 32 Amp. Cat - III

Making trench in Hard Murrum / Tar Road of suitable width

of 90 cms or required depth for laying any size of cable or

Rupees Sixty Two and

20 140.00 locating the fault all over the run and back filling the same 62.62 Mtr.

Sixty Two Paisas Only

and making the surface as normal ground.

Providing & laying approved make Double walled

corrugated pipes (DWC) of polyethylene (conforming to IS

14930 II ) with necessary connecting accessories of same

Rupees Sixty Two and

21 180.00 material at required depth for laying of cable. below ground 62.62 Mtr.

Sixty Two Paisas Only

/ road surface for enclosing cable and back filling the same

to make ground as per original. (A) 50 mm outer dia

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured

cable multistrand / Solid Aluminium conductor for 1.1 KV. to Rupees One Hundred

22 20.00 be laid on wall with necessary clamps or in existing trench / 138.37 Thirty Eight and Thirty Mtr.

pipe of following size of cables (C) 4 core 10 Sq. mm Seven Paisas Only

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured

cable multistrand / Solid Aluminium conductor for 1.1 KV. to Rupees One Hundred

23 140.00 be laid on wall with necessary clamps or in existing trench / 124.23 Twenty Four and Twenty Mtr.

pipe of following size of cables (B) 4 core 6 Sq. mm Three Paisas Only

Supplying and erecting Flexible PVC insulated multi strand

multi core 1.1 kv grade ISI marked copper wires of following Rupees Forty Four and

size to be erected as directed. (e) 1.50 Sq.mm 3 core round Forty Four Paisas Only

Providing and, fixing heavy duty flange type brass cable

gland with rubber ring for PVC insulated armoured cable Rupees Thirty Eight and

complete with out going tails, insulating tape etc for Thirty Eight Paisas Only

following size of cables. (C) 2 to 4 core 10 Sq. mm

Solder less crimping type Aluminium lugs conforming to IS

suitable for cable of following size evenly crimped with high

Rupees Six and Six

26 8.00 pressure tool & connected to switchgear terminals with 6.06 Nos.

brass/cadmium plated nut bolts in an approved manner. (A)

Solder less crimping type Aluminium lugs conforming to IS

suitable for cable of following size evenly crimped with high

Rupees Thirteen and

27 10.00 pressure tool & connected to switchgear terminals with 13.13 Nos.

Thirteen Paisas Only

brass/cadmium plated nut bolts in an approved manner (B)

Solder less crimping type Aluminium lugs conforming to IS

suitable for cable of following size evenly crimped with high

Rupees Six and Six

28 100.00 pressure tool & connected to switchgear terminals with 6.06 Nos.

brass/cadmium plated nut bolts in an approved manner (A)

Providing and erecting Approved make RCCBs conforming

to IS: 12640 and having sensitivity of 30 mA and Short Circuit

withstand capacity of 10 KA and suitable for operation on

phase and neutral 415V,50Hz. having characteristic of quick

29 1.00 3040.10 Thousand Forty and Ten Nos.

action & tripping with all advance feature & do not

incorporate any electronic component for following Max.

rating erected as directed.(iii) 63 Amps. FP Cat. III

Providing & erecting 415V MCB Four Pole Switch for

Rupees Six Hundred

Lighting Load (B curve) having 10KA breaking capacity &

30 1.00 638.32 Thirty Eight and Thirty Nos.

confirms to IS :8828 in existing box having following capacity

Two Paisas Only

(b)40 Amp. Cat. III

Supplying & erecting approved make IP 55 grade Company

fabricated Timer Panel of following capacity for switch On-

Off street lights on time scheduling basis made from 16G

CRCA sheet duly epoxy power painted inside and outside

Rupees Seventeen

with hinged doors and locking arrangement consisting of

31 1.00 17059.91 Thousand Fifty Nine and Nos.

suitable size of 4 Pole MCB and 4 pole contactor (cat-III)with

Ninety One Paisas Only

analog time switch, auto manual switch of same make and

suitable input and output Bakelite terminals and with door

earthing approved by Engineer in charge. (C) 63 Amp

Supplying and erecting triple pole & neutral 440V/ 500V

panel mounting Aluminium Busbars with four equal Nos. of

bus having current density not more than 0.8 Amp. / sq.mm

(Rated current / cross section area) duly wrapped with colour

Rupees Six Hundred

insulating tape for phase sequence of following current

32 1.00 660.54 Sixty and Fifty Four Rmt

carrying capacity, erected with necessary bus bar supports

/insulators, main cable socket to each busbar,erected in

existing cubical panel with necessary connections.(A)

Suitable for 100 Amp. Capacity

Supplying and erecting approved make panel mounting type

Rupees One Thousand

Digital Voltmeter having 3 digits LED display, 0 to 750 AC

Two Hundred Seventy

33 1.00 Volts range erected on existing panel board with all 1275.63 Nos.

Five and Sixty Three

connection, wiring etc .with manufacturers calibration

Supplying and erecting approved make panel mounting type

Digital Ammeter having 3 digits LED display, external CT Rupees One Thousand

operated, calibrated for 0 to 1000 Amps suitable to operate Five Hundred Fifty Eight

on 500 Volt AC , erected on existing panel board with all and Forty Three Paisas

connection, wiring etc .with manufacturers calibration Only

Providing & erecting L.T. Current Transformer with bar

Rupees Two Hundred

primary 50/5 to 1000/5 ratio 15 VA burden erected in

35 2.00 274.72 Seventy Four and Nos.

existing CRCA box duly secured with insulating materials

Seventy Two Paisas Only

connected to the meter

Supplying and erecting Ammeter / Voltmeter selector

Rupees Three Hundred

switch for 3 phase AC Supply 500 V on existing panel board

36 2.00 317.14 Seventeen and Fourteen Nos.

with necessary connections.

Supplying & erecting power contactor ,AC3 duty for time

Rupees Two Thousand

switch complete erected as per direction Cat III (D) 4 pole

Seven Hundred Eighty

Two and Fifty Five Paisas

Providing and erecting Pipe type earthing having

Rupees Three Hundred

cms.long and 2.5 cms. dia. galvanised iron pipe with

38 8.00 368.65 Sixty Eight and Sixty Five Nos.

coupling and buch buried in specially prepared earth pit

complete with necessary 8 SWG earth wire.

Supplying & erecting earth pit of minimum bore dia.150mm

size approved make Earthing Electrode consisting Pipe-in-

Pipe Technology as per IS 3043-1987 made of corrosion free

hot dipped G.I.Pipes having Outer pipe dia of 50mm having

80-200 Micron galvanising, Inner pipe dia of 25 mm having

200-250 Micron galvanising, connection terminal dia of

12mm with constant ohmic value surrounded by highly

conductive compound with high charge dissipation suitable

for following type of applications with chamber and heavy

duty cover. (A)(approved make OEM has to submit test

certificate including value of earth resistance of installation Rupees Four Thousand

duly stamped and signed by agency and officer Incharge has Five Hundred Ninety

to ensure the value of earthing resistane mentioned in test One and Forty Six Paisas

Certificate) & having back filling compound of (B) Inner Only

chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter

testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no

load & dry form, Sulphar content:- <2%(C) Back fill

Compound :- Earthing compound should be capable to

retain moisture for long time Necessary test report must be

submitted by Agency. (a) For Electrical Installation up to

440V in normal soil Length of pipe - 1 Mtr Back filling

compound - 1 Nos Bag of 15 Kg.

Total Amount Without GST

Total Amount Without GST

I/We am/ are willing to carry out the work @ _____________ % Above /Below ____________ Percentage (Should be written in Figures and Words) of the

Estimated rates mentioned above amount of my/ our Tender work out as under.

Estimated Amount Estimated Amount

Tender Rs. 1,07,93,700.00 Tender Rs.

Add % Rs. Add % Rs.

Total Rs. Total Rs.

(In Words (In Words

The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which no extra

payment shall be made

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills

In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement

4 Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost of

difference of cement consumption have been deducted from the rate of original item at the rate of input rate mentioned in all the tender.

Stamp with signature of contractor City Engineer

Karamsad Anand Municipal Corporation