COMPRESSIVE MAINT TO CERTAIN BUILDINGS IN POCKET 2 IN AGE B/R-I UNDER GE ROORKEE

Amount

Demolition of Brick work or stone / boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed .

M & L for brick work in CM (1:6) using Sub class ‘B’ Bricks straight or curved on plan exc 6 m mean radius complete all as specified and directed.

M & L for brick work in CM (1:4) using Sub class ‘B’ Bricks straight or curved on plan any radius in half brick complete all as specified and directed .

Demolition of cement concrete (un-reinforced) of any description and laid in any position complete all as specified and directed.

M&L for 75mm thick cement concrete (1:3:6) type C-2 (using 40 mm graded stone aggregate) as in flooring, hard standing, plinth protection laid in alternate bays n.exc 2.50 Sqm and joints filled with mastic filling including finishing even and smooth without using extra cement complete all as specified and directed.

M&L for 75mm thick cement concrete (1:4:8) type D-2, (using 40mm graded stone aggregate) as in sub base / leveling course etc complete all as specified and directed.

M&L for cement concrete tiles 25cm x 25cm x 20mm thick, machine pressed with grey cement and pigment, laid over and including 20mm thick screed bed in cement mortar (1:6) in floors, pavings etc, set, jointed and pointed in neat grey cement slurry complete all as specified and directed.

M&L for 60 mm thick Machine pressed precast conctete interlocking paver block of any shape and size, conforming to IS 15658-2006 of M-35 grade with grey cement and no pigment complete all as specified and directed.

Supply and laying clean dry river sand in 25 mm thick layer for cushioning to interlocking paver block complete all as specified and directed.

M&L for providing cement concrete type B-1, (1:2:4) (20 mm graded aggregate) as in sides of PCC tiles, bed blocks, for hold fast, coping and similar work complete all as specified and directed.

M&L for Machine cut kota stone slab flooring 20-22mm thick with and including 100mm wide 16 to 18mm thick white marble border, laid over and including 15mm thick screed bed in cement mortar (1:6), set in neat grey cement slurry and jointed with grey cement mixed with pigment to match the shade of the slab including rubbing and polishing with mirror finish complete all as specified and directed.

M&L for Machine cut kota stone slab 20-22mm thick in vertical surfaces such as skirting, laid over and including 10mm thick screed bed/backing in cement mortar (1:4), set in neat grey cement slurry and jointed with grey cement mixed with pigment to match the shade of the slab including rubbing and polishing with mirror finish complete all as specified and directed.

M & L for granite 14-16 mm thick (table rubbed and polished) in cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl molding of front side if required complete all as specified and directed.

M&L 40mm thick PCC type B1, (1:2:4) (20mm graded stone aggregates) as in floor finish surface even and smooth without using extra cement complete all as specified and directed.

Dismantling existing sunken floor n.exc 300mm deep in toilets/WCs / Bathrooms and removing the cinder/concrete from sunken portion and re-laying of sunken floor as specified below:- (a) Cleaning of RCC surfaces to remove all loose dirt, dust, loose particles etc with compressed air or by any other suitable method depending on site conditions, grinding sharp edges (if any) etc . (b) M&L for applying glass fiber reinforced acrylic modified cementitious coating system with base coat @ 1.50 Kg/Sqm glass fiber reinforcement and top coat @ 1.50 Kg/Sqm . (c) M&L for protection plaster 15mm thick in cement mortar (1:3) mixed with integral water proofing compound of approved make as per manufactirer's instructions. (d) M&L for providing 25mm dia GI pipe, medium grade as in spout projecting at least 150mm beyond outer face of wall. (e) M&L for filling of sunken portion with 40 mm graded broken brick aggregate including levelling, watering and ramming to a true surface. (f) M&L for 50 mm thick PCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in flooring, finished fair and even all as specified. (g) Cost of all the above provisions shall be deemed to be included in the quoted rates and nothing extra to be paid on this account. Note :- (i) The work shall be executed by authorised manufacturers/ applicator. (ii) Only plan area of the toilet/WC/bath shall be measured for payment purposes. (iii) Water proofing compound shall be measured and paid for separately.

Demolition of RCC of any description and in any position complete all as specified and directed.

M&L for precast reinforced cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate) as in landings, cover slabs for manholes, kitchen platform etc and similar articles with plain fair faces, including chamfers, weathering, throating etc and setting in cement mortar (1:6) with joints to match complete all as specified and directed.

S&F mild steel TMT reinforcement bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L for Mild steel TMT bars but 5mm dia and over upto andincluding 10mm dia in stirrups, spacers, cut to length, bent to shape required ,including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M & L Non - skid Ceramic coloured joint free tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15 mm thick screed bed in CM (1:6) complete all as specified and directed.

M & L Vitrified double charge tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15 mm thick screed bed in CM (1:6) complete all as specified and directed.

M & L Vitrified double charge shade, tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and incl laid over and including necessary adhesive (Tilofix), as on vertical surfaces such as skirting, dados, etc, including 10mm thick rendring in CM (1:4), complete all as specified and as directed.

M & L for glazed ceramic colour joint free tiles in vertical surface size 450x350x7 mm/ 450x300x7mm thick as required set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in CM (1:4) complete all as specified and directed.

M & L for Glazed ceramic tiles vertical surface 300x200x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and incl 10 mm thick rendring in CM (1:4) complete all as specified and directed.

M & L Non - skid Ceramic coloured joint free tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15 mm thick screed bed in CM (1:6) complete all as specified and directed.

Taking down cement or cement lime plaster on brick or stone walls etc including racking out joints, hacking for keys, scrubbing down with water etc complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar (1:6) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar (1:4) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for providing rendering 10 mm thick in CM (1:3) as in ceiling concrete surface finish even and smooth of any description etc complete all as specified and directed.

M & L for preparation of newly plastered surfaces of walls and applying 1mm thick wall care putty of approved makes as on wall surfaces and a coat of wall primer and two coats of oil bound distemper (White or tinted) complete all as specified and directed.

M & L for preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.

M & L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M & L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint complete all as specified and directed.

M & L for complete removal of existing treatment on walls, cornices etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots incl preparation of old decorated surfaces of walls and applying two coats of cement base paint complete all as specified and directed.

M & L for complete removal of existing treatment on walls, cornices etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots incl preparation of old decorated surfaces of walls and applying 1.00mm thick wall care putty of approved makes as on wall surfaces and two coats of oil bound distemper (White or tinted) complete all as specified and directed.

M & L for complete removal of existing treatment on ceiling, cornices etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots incl preparation of old decorated surfaces of ceiling and applying two coats of white wash complete all as specified and directed.

M & L for complete removal of existing treatment on wall, cornices etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots incl preparation of old decorated surfaces of wall and applying two coats of white wash complete all as specified and directed.

Taking down 15mm GI tubing of any description complete all as specified and directed.

S&F GI tubing ISI marked medium grade 15 mm bore with all fittings and fixed complete to walls and ceiling or laid under floor including connection etc, incl cutting chasing in wall for concealing of pipe if required complete all as specified and directed.

Taking down 20mm GI tubing of any description complete all as specified and directed.

S&F GI tubing ISI marked medium grade 20mm bore with all fittings and fixed complete to walls and ceiling or laid under floor including connection etc incl cutting chasing in wall for concealing of pipe if required, complete all as specified and directed.

Dismantling of water tanks any description any capacity and removing to store complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 1000 Ltrs capacity including 20mm dia bore PTMT ball valve, hoisted and fixed in position and making all necessary connections with and including connectors of suitable size complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 500 Ltrs capacity including 20mm dia bore PTMT ball valve, hoisted and fixed in position and making all necessary connections with and including connectors of suitable size complete all as specified and directed.

S&F in repair 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair 25mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and directed.

S & F in repairs of 15 mm bore size PVC, PTMT bib tap complete all as specified and directed.

S&F in repair 15mm dia Stop/ angle valve of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair 20mm dia Stop valve of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair 15mm dia Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified and directed.

S & F CP wall Mixer with 115 mm bend pipe complete all as specified and directed.

S & F brass CP mixer (basin mixer) for mixing hot & cold water screwed down for iron pipe complete all as specified and directed .

S & F in repairs brass chromium plated bib tap (short body) for iron pipe of 15 mm bore fancy type with crutch or butterfly handle, screwed down high pressure complete all as specified and directed.

S & F in repairs brass chromium plated bib tap (long body) for iron pipe of 15 mm bore fancy type with crutch or butterfly handle, screwed down high pressure complete all as specified and directed.

S & F in repairs stop/ Angle cock ISI marked fancy type, chromium plated, screw down high pressure with crutch or butterfly handle screwed both ends suitable for iron pipe of 15 mm bore complete all as specified and directed.

S & F in repairs 15mm Stop valves, fancy type, chromium plated with long shank and cup (concealed type) cast copper alloy, screwed down, high pressure, with crutch or butterfly or push button type handle as required, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S & F in repairs CP brass shower rose (single lever over head shower incl shower arm casted 190 mm long flat shape with flange) 125 mm size suitable for 15 mm bore pipe complete all as specified and directed .

S & F in repairs PVC connection 450 mm long with 2 Nos brass check nuts suitable for 15mm bore of pipe with washer complete all as specified and directed.

S & F in repairs PVC connection 600 mm long with 2 Nos brass check nuts suitable for 15 mm bore of pipe with washer complete all as specified and directed.

S & F in repairs 10 ltrs PVC (White) valve less syphonic action type, flushing cistern low level with inlet ball valve float, handle, Aluminium brackets for bottom support fixing with gitties embedded in wall with drilling machine etc complete all as specified and directed.

S & F vitreous china squatting pan (Orissa pattern) long pan including connection to trap, and to flushing pipe, anti-syphonage pipe etc incl making good to floor fixed in repair size 580x440mm white glazed with integral footrest with 'P' or 'S' trap complete (excluding flushing cistern and flush pipe) complete all as specified and directed.

S & F in repairs vitreous china wash hand basin, white flat back size 550 x 400 mm (excluding tap) but including Waste coupling, waste pipe, porcelain stopper and a pair of MS bracket etc complete all as specified and directed.

Ditto all as item no. 63 above but with pedestal and any colour as approved complete all as specified and directed.

S&F in repairs 15mm Fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair vitreous china urinal, half stall type white (excl of flushing cistern and flush pipe & waste pipe) fixing plugs bedding urinal against wall in cement mortar (1:2) securing to plug with and incl 60mm long brass screw, urinal spreader of PTMT any colour fixing with 15mm dia pipe, pointing around urinal back in cement fixed as in complete all as specified and directed.

S & F in repairs vitreous china wash down water closet pan (Pedestal pattern) white incl 'P' or 'S' trap and making good the disturbed surface to match with the existing complete all as specified and as directed.

S & F in Repairs plastic water closet (EWC) seat cover white closed pattern with flat bottom and cover incl mild steel chromium plated hinging device complete all as specified and directed.

S & F of stainless steel jet cleaner for ‘E’ type WC with flexible pipe complete all as specified and directed..

S & F Health Faucet 8 mm dia 1.2 mtr long flexible tube & wall hook complete all as specified and directed.

S & F in repairs Toilet paper holder with flat recessed type stainless steel complete all as specified and directed.

S & F of 750 mm long PVC waste pipe suitable for 32 to 40 mm size waste coupling complete all as specified and directed.

S & F in repairs towel rail 600 mm long 20 mm dia Brass chromium plated fixed to wall with CP steel screws etc, complete all as specified and directed.

S & F in repairs mild steel chromium plated grating (round) 125 mm dia fixed in cement mortar 1:3 over floor/nahani trap (with hole or without hole) complete all as specified and directed.

S&F in repair Stainless steel sink, 1.00mm thick for kitchen or laboratory, with plug, waste fittings, waste pipe, washers, including cantilever cast iron brackets, connecting union etc., overall size 495mmx420mm with bowl size 410mmx330mmx160mm complete all as specified and directed.

S & F of stainless steel plate rack of size 900x1200x300mm made of 0.63 mm thick stainless steel plate complete all as specified and directed.

S & F in repairs of 25 mm dia stainless steel fancy type curtain rod with and including stainless steel fancy type brackets, stops, in suitable size and necessary, side caps etc. complete all as specified and directed.

S & F in repairs PVC (SWR) pipes single socketed (ISI Mark) in any length with rubber ring joints fixed to wall (75 mm bore) complete all as specified and directed.

S & F in repairs PVC (SWR) bends / elbow 75 mm (ISI Mark) complete all as specified and directed.

S & F in repairs PVC (SWR) 'T' with oval access door 75 mm complete all as specified and directed.

S & F in repairs PVC (SWR) pipes single socketed (ISI Mark) in any length with rubber ring joints fixed to wall (110mm bore) including taking down complete all as specified and directed.

S & F in repairs PVC (SWR) bends / elbow 110 mm (ISI Mark) complete all as specified and directed.

S & F in repairs PVC (SWR) bends / elbow 110 mm with oval access door complete all as specified and directed.

S & F in repairs PVC (SWR) 'T' 110 mm complete all as specified and directed.

S & F in repairs PVC (SWR) 'T' with oval access door 110 mm complete all as specified and directed.

Taking down shutters of any description exc 1 sq. m and n exc 2 sq. m each complete all as specified and directed .

Taking down chowkhat or frames with shutters (without taking off shutter from the frame) exc 1.5 Sqm but n exc 4 Sqm each complete all as specified and directed .

Taking down chowkhat or frames with shutters (without taking off shutter from the frame) not exc 1.5 Sqm each complete all as specified and directed .

S & F Factory made 2nd class hard wood plain solid, straight chowkhat and frame rebated on the solid rounded or chamfered put together with glue pinned at point complete all as specified and directed .

M&L for framed work as in doors of angle or other ection with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe 410 -W (Gde E- 250) quality 'A' complete all as specified and directed.

S & F Factory made 30 mm thick flush shutters, solid core construction with block board core and plywood face panels, water proof/ weather proof type on both sides complete all as specified and directed.

S&F Factory made 35mm thick 2nd Class HW Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed .

S & F Factory made 30 mm thick 2nd class HW Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkhat complete all as specified and directed.

S & F 250 mm MS sliding door bolts, plate type, stove enamelled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.

S & F in repairs 250 mm MS sliding door bolts, plate type, stove enamelled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.

S & F mild steel 100 mm size of butt hinges, medium weight cold rolled complete for door etc with welding to steel chowkhat at any floor up to four storied bldgs and making it functional complete all as specified and directed.

S & F in repairs mild steel 100 mm size of butt hinges, medium weight cold rolled complete for door etc with welding to steel chowkhat at any floor up to four storied bldgs and making it functional complete all as specified and directed.

S & F Mild steel barrel tower bolts, stove enamelled black with bright bolts and fixed 150mm long bolts, fixed complete all as specified and directed.

S & F in repairs Mild steel barrel tower bolts, stove enamelled black with bright bolts and fixed 150mm long bolts, fixed in repair complete all as specified and directed.

S & F in repirs MS pressed handles oval type stove enamelled black, 150 mm size complete all as specified and directed.

S & F MS pressed handles oval type stove enamelled black, 150 mm size complete all as specified and directed.

S & F solid PVC door frame of size, 50x47mm, made out of 5mm thick plain colour PVC sheet, reinforced with MS square tube fixed with screw/plugs to brick walls complete all as specified and directed.

S & F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed .

S&F 100mm size PTMT butt hinges and fixed complete all as specified and directed.

S&F 150mm size PTMT tower bolt and fixed complete all as specified and directed.

S&F 125mm size PTMT door handles and fixed complete all as specified and directed.

S & F Factory made Steel windows with side hung shutters incl box type hinges with steel handles and steel peg stay complete with glazing bars dovetailed or welded complete all as specified and directed.

S & F Factory made Steel windows with side hung shutters incl box type hinges with steel handles and steel peg stay complete without glazing bars dovetailed or welded complete all as specified and directed.

S&F MS framed work such as grills, gratings, hold fast etc with ends of bars shouldered and or riveted or forged into spikes, framed guard bar, barred iron door, ladders, framed balusters, walk way, railings frame work of water tank and similar work confirming to Fe 290 Gde E165 complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden / metal frames, glazed with oil putty or fixed with beads including punching or drilling out old glazing pins / spring clips and providing new glazing pins/ spring clips complete all as specified and directed.

S & F of 3 mm thick plain, ordinary quality sheet glass and glazing with oil putty or fixed with wooden beads in square not exc. 0.5 sqm in each pane complete all as specified and directed.

S & F of 3 mm thick figured glass, pin head type and glazing with oil putty or fixed with wooden beads in square not exc. 0.5 sqm in each pane complete all as specified and directed.

S & F galvanised MS wire cloth, 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tack/galvanised wire staple complete all as specified and directed.

S & F in repairs galvanised MS, wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tack/galvanised wire staple complete all as specified and directed.

M & L for preparation of newly surface of wood and wood based surfaces by knotting, stopping etc of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint over a one coat of pink primer complete all as specified & directed.

M & L for preparation of newly steel and iron surfaces of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed.

M & L for preparation of old painted surface of wood and wood based surfaces by knotting, stopping etc of any description exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M & L for preparation of old painted steel and iron surfaces of any description exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

S&F in repair PVC (SWR) floor trap, plain with grating including jointing with solvent cement in cement concrete type B-1 (1:2:4) complete all as specified and directed.

S & F in repairs for stainless steel peg set of six complete all as specified and directed.

S & F Solar control film 25 micron reflective type stickled to glass panes as per instructions of manufacturers complete all as specified and directed.

M&L in repair for Factory made 18/19 mm thick pre-laminated particle board interior grade, pre-laminated one side with decorative choice & other side balancing white lamination, fixed with screws to frame work as in cupboard shutters, shelves incl wooden beading at ends and sides complete all as specified and directed.

Dismantling timber scantlings 40 Sqcm and over in section, fixed in any position complete all as specified and directed.

M&L for mild steel framed structura lwork as in roof trusses (framed), trussed purlins, crane gantries, rails, bolts and fastenings and heavy bracket framing using beam, tee, angle, channel or hollow section conforming to Fe 410-W Gde E- 250 quality A including distance pieces, base plate, nuts/ bolts, cleats etc complete all as specified and directed.

Taking down asbestos (corrugated, semi-corrugated etc) sheets in roof covering including ridge of any description complete all as specified and directed.

M&L Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Taking down alluminium door/ window complete shutter with/ without frame as per requirement and repair to butt hinges/ screw (incl S&F hinges/ screw/ rubber biding if required) and fixed to frame / wall complete all as specified and directed.

S&F in repairs Door closer hydraulically alluminium (extruded section body) regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed.

M&L Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed.

Taking down wall / ceiling boards asbestos / plywood of any thickness including cover fillets and supporting frame of any description complete all as specified and directed.

S&F Designer ceiling board 595x595x4mm thick with GI framed work of size main 'T' 24x38.5mm and cross T of size 24X28.5mm thick made out of PGI sheet 0.30mm thick doubled at web and single at flange, flange covered with powder coated sheet 0.25mm thick and angle 24x24x0.4mm covered with powder coated sheet 0.25mm thick for ceiling, suspended with 3mm dia GI wire and up to 2 mtr long complete including plugging in brick walls with steel rawl plugs @ 600mm C/C complete all as specified and directed.

S&F for providing & fixing false ceiling With Semi perforated 12mm thick micro tegular edged GRG false ceiling tiles at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance 8225:1987, Noncombustible as per BS 8225:1987, Noncombustible as per BS 476 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main- T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1 OOOmm length and Lshape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle ofsize 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per pecifications, drawing and complete all as specified and directed.

S&F PVC cabinet looking mirror 300x600mm complete all as specified and directed.

S & F of stainless steel soap dish complete all as specified and directed.

S & F in repairs for factory made Pre laminated / plain/ PVC shutter of 9mm(+/ - 0.7) thickness consisting of panel of 9 mm(+/ - 0.7) thick celuka ply of density 600 Kg / Cbm manufactured by an ISO-9000 certified company using for back side shutter celuka ply 9 mm (+ /- 0.7) thick cut in desired size of shutter and fixed with the frame of kitchen accessory etc complete as direction of GE, manufacturer's specification and drawing complete all as specified and directed.

S & F in repairs for factory made PVC shutter of 18 mm (+ - 0.7) thickness consisting of panel of 18 mm(+ - 0.7) thick celuka ply of density 600 Kg / Cbm manufactured by an ISO-9000 certified company using for shutter celuka ply 18 mm(+ - 0.7) thick cut in desired size of shutter and fixed with the frame of kitchen/cupboard accessory at all four edges of shutter using 13/6 size self tapping steel. The thickness of the shutter is edge lipped by 18 mm widthx1 mm thick PVC sheet using solvent cement etc. including stainless steel handle, tower bolt, magnet,piano hinges etc complete as direction of GE, manufacturer's specification and drawing complete all as specified and directed.

S & F in repairs HDPE PVC lid (cover) for 500/ 1000 Ltrs capacity PVC tank complete all as specified and directed.

S&F for PVC SHEET WALL PANELLING and equivalent of thickness 5 mm (+ 0.25) consisting of panels of desired size stuck on inner frame work of 50 mm wide strips of 5 mm (+ 0.25) thick prelam PVC sheet. The panel & strips shall be 600 kg/cbm Density Manfactured by an ISO-9000 certified company. The strips should have in their centre a grove of 6mm width and 1 mm depth for sinking the head of the scew used to fix the strips to the wall vertically at an equal interval of 10" between two PVC strips, The PVC strips shall be fixed to the wall using 65 mm long M.S screws through groove in the strip by using PVC fasteners. The distance between two screws shall not be more than 200mm. A groove of 2mm may be left at the joint of two panels for aesthetic looks. The exact size of the panel and correspondingly of the grid may vary depending on the size of the wall. Optionally a strips of 5 mm(+ 0.25) thick prelam PVC sheet of width 75mm feathered at the edges shall be struck at the places where two panels are joined, using solvent cement complete all as specified and directed.

S&F 0.56mm thick Plain, Aluminium sheeting, Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) and including fixing on wooden door shutter with nails complete all as specified and directed.

S&F in repair mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

Disconnecting existing tanks for cleaning and removing all scale and dirt etc from OH water storage tanks of any description (PVC, Cemented, AC or GI ) including cleaning the mouths of inlet & outlets pipes etc capacity of tank n.exc 250 ltr but n, ecx 500 ltrs and re-fixing in position complete all as specified and directed.

Disconnecting existing tanks for cleaning and removing all scale and dirt etc from OH water storage tanks of any description (PVC, Cemented, AC or GI ) including cleaning the mouths of inlet & outlets pipes etc capacity of tank n.exc 500ltr but n, exc1000 ltrs and re-fixing in position complete all as specified and directed.

M & L for replacement of wooden glazing beading not exc 3 sq cm of sectional area of 2nd class hard wood straight (any size) finished wrought of glazing or gauged joinery for fixing wire gauge/securing glass pane complete all as specified and directed.

S & F in repairs Stainless steel Door Stopper single leg Best quality Overall length of cover plate140 mm complete all as specified and directed.

S&F rubber door cill 40/50mm as required in door cill complete with required nails etc complete all as specified and directed.

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F corner sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

M&L powder coated Anodised aluminium frame for doors, windows, ventilators, partition walls etc with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

M&L powder coated aluminium door shutters, aluminium section weighing 0.55 kg/ m including 01 no mortice lock, necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, door stopper, hinges if required, anodised aluminum snap beading screws etc. hung/ sliding type as required complete all as specified and directed.

S&F powder coated alum glazed/ gauzed window and ventilators sliding/hung type as required; aluminium section weighing 0.55 kg/ m, incl necessary lock system/ tower bolts, necessary cleats glazing clips anodised, alum snap bidding screw and rubber lining at sides for air locking ,aluminium mongry and without glazing bar complete all as specified and directed.

S&F sheet glass 5 mm thick ordinary quality and glazing with neoprene beading to aluminium frame complete exc 0.5 sqm in each pane complete all as specified and directed.

S&F aluminium grill 2"x2" aperture fixed in aluminium windows complete all as specified and directed.

M&L in repair for 9mm thick pre-laminated particle board interior grade, pre-laminated one side with decorative choice & other side balancing white lamination, fixed with screws to frame work as in cupboard shutters, shelves incl wooden beading at ends and sides complete all as specified and directed.

S&F in repair Gun-metal globe or gate valves 20mm bore with iron wheel head, screwed both ends for iron complete all as specified and directed.

S&F in repair 32mm dia bore SS Waste coupling (half or full threaded) complete all as specified and directed.

S&F in repair 40mm dia bore SS Waste coupling (half or full threaded) complete all as specified and directed.

S & F aluminium mortise lock 2 levers (door lock vertical type, of any size complete all as specified and directed.

S&F in repair 0.80mm thickness Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws,clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed.

M&L prepration of roof surface by brushing with wire brush for removing dust / dirt from surface and applying a coat of primer suitable for damp proofing and applying 2 coat of demp proof paint over primered surface incl curing to treated surface complete all as manufactrur instruction and as directed.

Nand Associates (BID ID -3294260)

sidh builders (BID ID -3294500)

JAHANGIR CONTRACTORS (BID ID -3295740)

M/S. DEV ASSPOCIATES (BID ID -3294199)