Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.8 LAccepted-AOC | L1 | Accepted-AOC work awarded | |
| 2 | L1₹2.6 LRejected-Finance | L1 | Rejected-Finance L3 | |
| 3 | L2₹2.5 LRejected-Finance BELOW SLAUGHTER HOUSE KRISHNA NAGER SHIMLA | SHIMLA | SHIMLA | HIMACHAL PRADESH | L2 | Rejected-Finance L2 |
| Sl No | Description | Qty | Unit | NISHANT KUMAR DHIMAN L3 | KUMAR ANUBHAV L1 | SUNIL KUMAR L2 |
|---|---|---|---|---|---|---|
| 1.00 | Excavation in foundation and trenches etc. (in pipes and pits) in all kinds of soils such as pick work, jumper work, blasting in soft/hard rock, chiselling/wedging out of rock/where blasting prohibited) saturated soil stacking the excavated soil as directed by the Engineer-in-charge clear from the edge of excavation and then returning the stacked soil in 15cm layers when required into plinth sides of foundation etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed by the Engineer -in-charge in all leads and lifts. | 131.4 | Cum | 310 ₹40,734 | 290 ₹38,106 Lowest | 300 ₹39,420 |
| 2.00 | Laying, jointing & testing in trenches to be levelled to grades, BIS marked GI pipes conforming to BIS:1239 ( latest with up to date amendments ) of following dia (Medium class PE) duly flanged after every 5th pipe with intermediate butt welded joints including the cost of flanges, bends of required degree, tee/ short pieces made from parent tubes of different degrees cutting , welding & jointing with flanges conforming to table as specified below of BIS:6392 ( latest with up date ammendments ) three layers (two layer out sides and one layer inner side) welded as per BIS:816 ( latest with up date ammendments ) with electrodes conforming to BIS 814 (latest with up date ammendments ) & provided with nuts & bolts BIS 1369 (latest with up date ammendments) of required sizes, 4 mm thick ( Champion make ) compressed asbestos fiber gasket or synthetic rubber gaskets conforming to BIS 2712 (latest with up date ammendments ) & approved specification as per site conditions including flushing, cleaning and hydraulic testing complete to respect with in all leads and lifts as per the direction and satisfaction of the Engineer-in-charge. (The earth work will be measured & paid separately) | - | - | - | - | - |
| 2.01 | 100mm dia (M) PE | 292 | Rmt | 310 ₹90,520 | 290 ₹84,680 Lowest | 300 ₹87,600 |
| 3.00 | Providing and fixing of Cast Iron Sluice valve of following dia ISI marked made Kirlosker PN 1.6 conforming to IS (14846-2000) latest with up to date ammendements, both side flanged T-17 including cutting, welding, gasket sheet 3mm thick champion make nut, bolt complete in all respects with in all lead and lifts as per direction & satisfaction of Engineer - in - charge. | - | - | - | - | - |
| 3.01 | 100mm dia | 1 | Nos | 23,000 ₹23,000 | 17,000 ₹17,000 Lowest | 22,000 ₹22,000 |
| 3.02 | 65mm dia | 1 | Nos | 17,000 ₹17,000 | 12,000 ₹12,000 Lowest | 16,000 ₹16,000 |
| 4.00 | Manufacturing, supplying and fixing of following dia double flanges bend of required degree including providing and fixing of M.S. Flanges of Table-5 including the cost of welding, rubber sheet nuts and bolts complete in all respect as per entire satisfaction of Engineer in charge. | - | - | - | - | - |
| 4.01 | 100mm dia | 6 | Nos | 2,500 ₹15,000 | 2,300 ₹13,800 Lowest | 2,430 ₹14,580 |
| 5.00 | Wiring for light point/exhaust fan point/callbell point with 1.50 sqmt PVC insulated PVC sheathed copper conductor cable in surface/recessed PVC conduit as required. | 10 | Points | 1,000 ₹10,000 | 900 ₹9,000 Lowest | 900 ₹9,000 Lowest |
| 6.00 | Wiring for light/power plug wiring with 1x4 sqmt PVC insulated copper conductor single core cable in surface/recessed PVC conduit along with 2x2.24 mm Dia.bore copper wire for loop earthing as required. | - | - | - | - | - |
Tender Value
₹1.8 L
EMD Value
₹3,649
Closing Date
19 Sept 2026, 11:00 amClosed
Executive Engineer
JSV Division Jawali
Restoration of Rain damages various LWSS Tube wells under Sub Division Jawali Section Bharmar and Jawali in Tehsil Jawali Distt Kangra
2026_HPIPH_142898_1
4345-4394 dated 09.09.2026
Open Tender
Civil Works - Water Works
Item Rate
30 days
Jawali
Please refer Tender documents.
5 documents required · 5 mandatory
₹350
₹3,649
14 Oct 2026
11 Sept 2026
19 Sept 2026
11 Sept 2026
19 Sept 2026
11 Sept 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Excavation in foundation and trenches etc. (in pipes and pits) in all kinds of soils such as pick work, jumper work, blasting in soft/hard rock, chiselling/wedging out of rock/where blasting prohibited) saturated soil stacking the excavated soil as directed by the Engineer-in-charge clear from the edge of excavation and then returning the stacked soil in 15cm layers when required into plinth sides of foundation etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed by the Engineer -in-charge in all leads and lifts. | 131.4 | Cum | 121 | ₹15,899.4 |
| 2 | Laying, jointing & testing in trenches to be levelled to grades, BIS marked GI pipes conforming to BIS:1239 ( latest with up to date amendments ) of following dia (Medium class PE) duly flanged after every 5th pipe with intermediate butt welded joints including the cost of flanges, bends of required degree, tee/ short pieces made from parent tubes of different degrees cutting , welding & jointing with flanges conforming to table as specified below of BIS:6392 ( latest with up date ammendments ) three layers (two layer out sides and one layer inner side) welded as per BIS:816 ( latest with up date ammendments ) with electrodes conforming to BIS 814 (latest with up date ammendments ) & provided with nuts & bolts BIS 1369 (latest with up date ammendments) of required sizes, 4 mm thick ( Champion make ) compressed asbestos fiber gasket or synthetic rubber gaskets conforming to BIS 2712 (latest with up date ammendments ) & approved specification as per site conditions including flushing, cleaning and hydraulic testing complete to respect with in all leads and lifts as per the direction and satisfaction of the Engineer-in-charge. (The earth work will be measured & paid separately) | - | - | 153 | - |
| 2.01 | 100mm dia (M) PE | 292 | Rmt | 121 | ₹35,332 |
| 3 | Providing and fixing of Cast Iron Sluice valve of following dia ISI marked made Kirlosker PN 1.6 conforming to IS (14846-2000) latest with up to date ammendements, both side flanged T-17 including cutting, welding, gasket sheet 3mm thick champion make nut, bolt complete in all respects with in all lead and lifts as per direction & satisfaction of Engineer - in - charge. | - | - | 153 | - |
| 3.01 | 100mm dia | 1 | Nos | 121 | ₹121 |
| 3.02 | 65mm dia | 1 | Nos | 121 | ₹121 |
| 4 | Manufacturing, supplying and fixing of following dia double flanges bend of required degree including providing and fixing of M.S. Flanges of Table-5 including the cost of welding, rubber sheet nuts and bolts complete in all respect as per entire satisfaction of Engineer in charge. | - | - | 153 | - |
| 4.01 | 100mm dia | 6 | Nos | 121 | ₹726 |
| 5 | Wiring for light point/exhaust fan point/callbell point with 1.50 sqmt PVC insulated PVC sheathed copper conductor cable in surface/recessed PVC conduit as required. | 10 | Points | 121 | ₹1,210 |
| 6 | Wiring for light/power plug wiring with 1x4 sqmt PVC insulated copper conductor single core cable in surface/recessed PVC conduit along with 2x2.24 mm Dia.bore copper wire for loop earthing as required. | - | - | 153 | - |
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.64 MB
BOQ_212226.xls
BOQ • 0.30 MB
form68.pdf
Tender Documents • 0.44 MB
terms.pdf
Tender Documents • 0.17 MB
142898.pdf
PDF • 0.07 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .