REPAIR TO FLOOR, PLASTER, INTERNAL WATER SUPPLY, SANITARY FITTINGS, RAILING, STAIRCASE AND OTHER MISC WORKS AT OTM ACCN AT INS DRONACHARYA UNDER GE FORT KOCHI

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding(but not backing), removing serviceable tiles to store and rubbish off the premises, all as specified and as directed.

M&L 15 mm thick screed bedding layers in cement mortar 1:4 for laying floor finishes tiles, all as specified and as directed.

M&L rendering plaster 10 mm thick in CM 1:3 on brick or concrete surfaces , finished fair and even .for receiving wall tiles, all as specified and as directed.

M&L Joint free non skid ceramic coloured tiles 7 to 8 m thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, all as specified and as directed.

M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exc. 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in white or colour to match complete all as specified and as directed.

M&L 10mm thick dark shade vitrified ceramic tile, square/rectangular, polished, area of each tile not exceeding 0.36 sqm in floors/skirting set jointed and pointed in neat cement slurry and pointed to match, all as specified and as directed.

M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exc. 0.11 sqm in floor etc set and jointed in neat cement slurry and pointed in white or colour to match complete all as specified.

M&L for glazed ceramic tiles, coloured of size 300 x 400/450 x 7 mm thick as in dado/skirting and riser to steps and jointed in neat cement slurry and pointed in white or coloured cement to match, all as specified and as directed.

S&F stainless steel grills/railings fixed to walls/floors of Grade-304 including all pieces, drilling holes, swelling, buffing, complete including taking down old rusted one complete all as specified and as directed.

S&F in repair 32 mm brass chromium plated bottle traps for washbasins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified

S&f in repair 20 mm dia curtain rods, anodised aluminium alloy fixing with brackets, all as specified and as directed.

S&F in repair 30 mm dia stainless Steel fancy type (powder coated) curtain rods with decorative single Knob and brackets on either sides in Doors/Windows as per sample complete all as specified

S&F in repair waste coupling brass, chromium plated for wash hand basin with long screwed shanks and fly nuts fixed in repair 32mm bore, all as specified and as directed.

S&F in repair; 15 mm Concussive push button taps of cast copper alloy, screwed for iron pipe and fixed, all as specified and as directed.

S&F in repair waste coupling brass, (40mm) chromium plated suitable for steel sink including strainer etc, all as specified and as directed.

S&F Sheet glass ordinary quality & glazing with aluminium / wooden beading and clip in square n-exc. 0.5 sqm in each pane 4 mm thick including hacking down complete all as specified & directed.

S&F Sheet glass ordinary quality & glazing with aluminium / wooden beading and clip in square exc. 0.5 sqm in each pane 4 mm thick including hacking down complete all as specified & directed.

Taking down cement plaster of any description on walls including raking out joints, hacking for key scrubbing down with water etc complete all as specified

M&L for rendering plaster 15 mm thick in two coats (10 mm thick in cement mortar 1:6 and 5 mm thick in cement mortar 1:4) mixed with water proofing compound) on other than fair faces of brick work or concrete surfaces finished even and smooth without using extra cement, all as specified and as directed.

M&L for plastering in CM 1:6, 10 mm thick on walls finished even and smooth w/o using extra cement, all as specified and as directed.

M&L for preparation of new plastered surface of wall and applying two coats of oil bound distemper over a coat of primer, all as specified and as directed.

M&L for two coats of Antifungal paint (Apex ultima Protek of Asian paint or Equivalent in approved Makes) over a coat of Exterior primer (Professional pack of Asian paints) over a coat of external wall care putty n.exc 2 mm thick on new or old prepared plastered external surfaces and including scaffoldings and cradles including hoisting and lowering as required with bracing, support complete all as specified and as directed.

S&F in repairs vitreous china wash down water closet (Pedestal pattern) white with 'P' trap complete including plastic seat cover white closed pattern with flat bottom, and cover with plastic hinges, all as specified and as directed.

S & F in repairs vitreous china wash basin, white flat back, size 550 X 400 mm fixed to wall by anchor bolts excluding taps, waste coupling, waste pipe etc, all as specified and as directed.

S&F in repair PVC low level flushing cistern 10 Ltr capacity including float valve and flush pipe, all as specified and as directed.

S&F in repairs fancy type pillar taps cast copper alloy, with capstan head, chromium plated, screwed down , high pressure, with or without lettered 'Hot' or Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed. Bore of pipe in 15mm, all as specified and as directed.

S&F in repairs PVC inlet connections 60 cm long, 15 mm bore with PTMT nuts, all as specified and as directed.

S& fix in repairs Towel rail chromium plated brass, fixed in repairs complete 600mm long, all as specified and as directed.

S&F in repairs door closer aluminium (extruded section) body hydraulically regulated designation No 3 universal type suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed, all as specified and as directed.

S&F in repairs Toilet paper holder SS fixed in repairs complete all as specified and as directed.

S&F in repairs Stainless steel soap dish fixed with SS screws, all as specified and as directed.

S&F in repairs anodised aluminium alloy body door stopper 75 mm size, all as specified and as directed.

S & F in repair CP grating 100 mm dia with /without hole, all as specified and as directed.

S&F in repair Plastic water closet seat cover (any Type) black or white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, all as specified and as directed.

S&F in repair aluminium wire mesh fix to wood/aluminium frames including taking out old damaged aluminium wire cloth complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails . MS frame shall be covered with heat moulded palin colour PVC 'C" channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail , lock rail & bottom rail on either side & as gap insert for top rail & bottom rail , panelling of plain colour PVC sheet to be fitted in the M s frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement ,supplying & fixing in the frame at site as per specification & drawing, all as specified and as directed.

S&F solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube supplying & fixing in opening as per specification & drawing.

S&F in repair Aluminium alloy wire cloth, 0.45 mm, nominal dia of wire and average width of aperture 1.40 mm and fixed with wooden beadings, all as specified and as directed.

S&F anodised aluminium extruded handles 150 mm size, all as specified and as directed.

S&F aluminium anodised barrel tower bolts of extruded section 200 mm size, all as specified and as directed.

S&F butt hinges 75 mm extruded aluminium alloy with galvanised mild steel hinge pin, anodised C-21, all as specified and as directed.

Taking down chowkhats or frame with shutters (without taking shutter from frame) exc 1.5 sqm and n. exc 4.0 sqm and removing from site, all as specified and as directed.

Taking down chowkhats or frames not exc 1.5 sqm with shutter (without taking of shutter from the frames) including hold fasts and PCC block, all as specified and as directed.

Taking down shutter of any description, exceeding. 1Sqm and not exceeding 2 sqm each and removing from site all as specified and as directed.

Taking down shutter of any description, exceeding. 2 Sqm and not exceeding 4 sqm each and removing from site all as specified and as directed.

S &F of second class H.W 'teak' plain solid straight chowkats and frames wrought framed rebated on chamfered put together with glue pinned at joints etc all as specified and as directed.

S & F 30 mm thk Plain, framed, panelled shutters (any number of panels), with panels of timber (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted all as specified and as directed.

S & F 35 mm thick II class HW Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; as per section 8.24 (a) sizes of members of shutters all as specified and as directed.

M&L Preparation of new wooden surface of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over pink prime including preparation of new wooden surface all as directed and as specified.

S&F 100 mm size Mild steel butt hinges medium weight, fixed to chowkhat all as specified and as directed by Engineer-In-Charge.

S&F 75 mm size Mild steel butt hinges medium weight, fixed to chowkhat all as specified and as directed by Engineer-In-Charge.

S & F 100 mm long aluminium anodised barrel tower bolt all as specified and as directed by Engineer-In-Charge.

S & F 150 mm long aluminium anodised barrel tower bolt all as specified and as directed by Engineer-In-Charge.

S&F 150 mm long aluminium handle fabricated type anodised all as specified and as directed by Engineer-In-Charge.

S&F 250 mm size Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy, all as specified and as directed.

S&F 300 mm, size mild steel ordinary rat tail rod pattern springs including roller and roller plate, all as specified and as directed.

Supply only half/quarter turn 15 mm bore bib tap, cast brass type with crutch or butterfly handle, screwed for iron pipe long body, complete all as specified and directed (Weight not less than as specified in SSR)

Supply only half/quarter turn 15 mm bore bib tap, cast brass chromium plated fancy type with crutch or butterfly handle screwed down screwed for iron pipe short body, complete all as specified and directed (Weight not less than as specified in SSR)

Supply and fix in repair for 15mm bore bib taps, chromium plated alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

Supply and fix in repairs half/quarter turn 15 mm Stop valves, cast brass chromium plated fancy type with crutch or butterfly handle complete all as specified and as directed.

Supply and fix in repairs half/quarter turn 20 mm Stop valves, cast brass chromium plated fancy type with crutch or butterfly handle complete all as specified and as directed.

Supply and fix half/quarter turn 15 mm dia Angle cock, cast copper alloy, chromium plated, fancy type with long shank and cup, screwed down high pressure with crutch or butterfly handle, screwed both ends iron pipe including taking down old cock complete; all as specified and as directed.

Supply and fix in repairs Health faucet suitable for ABS Body chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete suitable for working pressures of high rise buildings up to 11 floors in all as specified and as directed.

S&F in repair 15mm dia brass, chromium plated WHB mixer tap for mixing hot & cold water, screwed down, complete all as specified.

Supply and fix 125 mm shower rose chromium plated with swivel joints suitable for fixing to 15 mm GI/UPVC/CPVC pipe or union including taking down old shower, all as specified and directed

Taking down old unserviceable pipe PP-R any type/size from wall complete including all connecting accessories complete all as specified and as directed.

Supply and fix 20 mm 3-layer PP-R Polypropylene random copolymer) pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc, all as specified and as directed.

Supply and fix 25 mm 3-layer PP-R Polypropylene random copolymer) pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc, all as specified and as directed.

Taking down old U/s pipe GI/PVC/CPVC/UPVC from wall complete including all connecting accessories complete all as specified and as directed.

Supply and fix 15 mm unplasticised PVC pipes of pressure rating 10kg\cm2 fixed to walls or laid in floors, complete all as specified and as directed.

Supply and fix 20 mm unplasticised PVC pipes of pressure rating 10kg\cm2 fixed to walls or laid in floors, complete all as specified and as directed.

Supply and fix 25 mm unplasticised PVC pipes of pressure rating 10kg\cm2 fixed to walls or laid in floors e, complete all as specified and as directed.

Supply and fix in repair 15 mm dia ball valves brass high pressure with polythene float and fly nut , complete all as specified and as directed.

Supply and fix in repair 20 mm dia ball valves brass high pressure with polythene float and fly nut, complete all as specified and as directed.

Supply and fix in repair 25 mm dia ball valves brass high pressure with polythene float and fly nut, complete all as specified and as directed.

S&F 20 mm inner dia CPVC SDR 11 pipe and plain CPVC SDR 11fittings like bends, sockets, tees, union in multi storey buildings upto and including 4th storey , all as specified and as directed.

S&F 20 mm inner dia CPVC SDR 11 pipe and plain CPVC SDR 11 fittings like bends, sockets, tees, union in multi storey buildings 5th to 8 th storey , all as specified and as directed.

S&F 25 mm outer dia CPVC SDR 11 pipe and plain CPVC SDR 11fittings like bends, sockets, tees, union in multi storey buildings upto and including 4th storey including taking down old pipe, all as specified and as directed.

S&F 25 mm outer dia CPVC SDR 11 pipe and plain CPVC SDR 11fittings like bends, sockets, tees, union in multi storey buildings 5th to 8 th storey all as specified and as directed.

Dismantling water tanks exc 500 and not exc 1000 ltr cap and removing to store complete all as specified and directed.

Dismantling water tanks exc 1000 and not exc 2000 ltr cap and removing to store complete all as specified and directed.

S&F in repairs sinks with drainage boards made of stainless steel 1 mm thick kitchen with plugs , washers and waste; including bedding in cement mortar to dwarf wall/Granite or including fixing and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete (sink counter sunk into granite platform), all as specified and as directed.

S&F in repair PVC Bathroom Cabinet mirror of size 600x450mm complete all as specified and directed. Make prayag or equivalent in 'Appx C'

S & F in repair Glass shelf 600 MM . Make:- Jaquar or equivalent in 'Appx C'

S & F in repair 15mm CP wall mixer for mixing hot and cold water screwed down for iron pipes complete all as specified and directed by Engr in Charge Make Jaquar FRL521-N or Equivalent in Appx ‘C’

S&F in repairs anodised aluminium alloy body door stopper 150 mm size

M&L in repairs for PVC (SWR) pipes 110 mm dia single socketed in any length with rubber ring joints fixed to wall GI brackets /clamps all as specified and directed ( the portion of pipe inserted to the masonry /slab shall be fixed with water proofing bath seal tape two way to the entire width of masonry/slab.) . Note:-Pipe are to be fixed away from the wall using suitable clamps and bolts.

S&F 1000 Ltr capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) twisted and fixed in position all as specified in SSR Part-I.

S&F 2000 Ltr capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) twisted and fixed in position all as specified in SSR Part-I.

M&L for brass spindle suitable for bib tapes /stop valves/mixer of size 15/20mm as per site requirement

S & F as in repairs 50 mm bore high density poly-ethylene pipes (HDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc, including required bend complete all as specified.

-Ditto- all as per item No 92 here in before but 40 mm bore

Material and Labour for Mangalore pattern roofing tile of any direction and in any position laid with cement mortar 1:6 over top of RCC roofing including necessary budding/ filleting complete all as specified including taking down old damaged tiles of any place and in any position/ direction complete all as specified and as directed.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness,

Supply and fix anodised aluminium snap grid frame work for false ceiling with 605mm x 605mm size, consisting of main Tee of size 23.50mmx36.50mmx1.50mm, cross Tee of size 23.50mmx23.50mmx1.50mm and wall angle of size 36.00mmx25.00mmx1.50mm of approved make including all necessary cuttings, fixing of aluminium section firmly in position with and including steel hangers 6 mm dia G.I. wire (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60 mm long and expansion hold fasteners 40 mm long in soffit of slab/walls including provision of 12mm thick gypsum board 600mmx600mm size, fixed in ceiling, flat or sloping complete all as specified and directed.

-Ditto- All as per item No 96 here in before but for fixing only. (The serviceable grid and board obtained from item No 95 above shall be reused) all as specified and as directed.

M&L for repairing of chajja / roof projection by taking down old plaster applying 10 mm thick rendering in cement mortar 1:3 including , finishing the surface even & smooth with out using extra cement and complete surfaces finished i.e. exterior emulsion etc complete all as specified and as directed.

Taking down and repairing of steel rolling shutter of any description, position and in any width complete and, repairing necessary repairs like repairing and refixing of guider channel, repairing of roller lath including necessary fixing arrangement and erecting the same after repairing in position complete all as s directed for smooth functioning complete, and all as specified and directed by Engineer-in-Charge.

M& L for running welding in repairs thickness of metal to be welded not exceeding 6mm, all as specified and as directed.

M& L for running welding in repairs thickness of metal to be welded exceeding 6mm but not exceeding 9mm, all as specified and as directed.

K.V.GEORGE AND COMPANY (BID ID -3062015)

Joseph I V (BID ID -3061343)

JESWIN BUILDERS (BID ID -3070073)

SOORYA ASSOCIATES (BID ID -3070308)