Construction of proposed cafeteria building near Rehan Basera in MC Paonta Sahib

Amount

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan),including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting, out the excavated soil and disposal of surplus excavated soil as directed, within a lead of column footing

P/L Plain concrete in Foundation 1:3:6 (1 Cement : 3 coarse sand) : 6 graded stone aggregate 40 mm nominal size) Column Footing

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand): 3 graded stone aggregate 20 mm nominal size RCC Footing, coloumn and plinth beam

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm. Column First Floor and Stair case

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plainwindow sills, staircases and spiral stair cases above plinth level up to floorfive level, excluding the cost of centering, shuttering, finishing andreinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size). celing beam and slab

Bick work with common burnt clay machine moulded perforated bricks of classdesignation 12.5 conforming to IS: 2222 in superstructure above plinth level up tofloor five level in cement mortar 1:6 (1 cement : 6 coarse sand)

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand)

Centering and shuttering including strutting, propping etc. and removal of form work for Suspended floors, roofs, landings, balconies and access platform

Centering and shuttering including strutting, propping etc. and removal of form work for Lintels, beams, plinth beams, girders, bressumers and cantilevers

Centering and shuttering including strutting, propping etc. and removal of form work for Columns, Pillars, Piers, Abutments, Posts and Struts

P/l Tor steel in reinforcement complete in all respect

15mm Cement plaster in single coat on the rough side of brick/concrete/stone walls for interior plastering upto floor two level including arrises/internal roundedangles not exceeding 80mm in grith and finished even and smooth

20mm Cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto floor two level including arrises/External rounded angles not exceeding 80mm in grith and finished even and smooth Cement Mortar1:6

Providing and laying vitrified floor tiles in different sizes (thickness to bespecified by the manufacturer) with water absorption less than 0.08% andconforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cementand matching pigments etc., complete. Size of Tile 500x500 mm cafeteria and washroom

Providing and laying vitrified wall tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and of approved make, in all colours and shades, laid on jointing with grey cement slurry @ 3.3 kg/ sqm including grouting and matching pigments etc., complete(Size of Tile 800x800 mm) Was Room and Dresssing below glazing

Providing and laying vitrified decorative wall tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and of approved make, in all colours and shades, laid on jointing with grey cement slurry @ 3.3 kg/ sqm including grouting and matching pigments etc., complete(Size of Tile 800x800 mm)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be pad for seperately sal wood

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid for seperately ) second class teak wood

Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws Second Class teak wood

Painting with oil type wood preservative of approved brand and manufacture : New work (two or more coats)

French spirit polishing : Two or more coats on new works including a coat of wood filler wood and wood based surfaces to give an even surface including cleaning the surface of all dust and sand papered smooth and including a coat of wood filler.

P/L Granite Stone finishing in Stair steps complete in all respect

P/L Toughened Glass Panel complete in all respect

GAURAV SHARMA

rakesh