Improvement of electrical installations and lighting arrangement by replacement with LED lights at FSD Rudrapur under DO Haldwani

Amount

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

3 x 1.5 sqmm

5 x 1.5 sqmm

3 X 2.5 sq. mm

Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required.

200 mm X 150 mm X 75 mm deep

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required.

5/6 amps switch

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.

6 Module (200 mm x 75 mm)

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc as required.

5/6 Amp Switch

15/16 Amp Switch

3 Pin 5/6 Amp Socket

6 Pin 15/16 Amp Socket

Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit including dismantling as required.

Group A

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.

Installation, testing and commissioning of pre-wired,fluorescent fitting / compact fluorescent fitting of all types,complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc.as required.

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.

Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.

Providing and fixing H.T. danger notice plate of 250m X 200 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.

Supplying and fixing following rating, four pole, (three phase and neutral), 415 V, residual current circuit breaker (RCCB),having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing of 32 mm dia X 2.00 metres long G.I. pipe (medium class) bracket for mounting of fluorescent / HPMV /HPSV street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts,bolts and washer, painting the flat iron with primer and finish paint etc. as required.

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single Pole

Double Pole

Triple Pole and Neutral

Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32 A 240 V "C" curve DP MCB complete with connections, testing and commissioning etc. as required.

Supplying and fixing 20 A, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet and complete with connections, testing and commissioning etc. as required.

Providing and laying earth connection from earth electrode with 6 SWG dia G.I. wire in 15 mm dia. G.I. Pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required.

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.

Upto 35 sq. mm

Supplying and fixing of light class G.I. pipe of 50 mm dia. (nominal) 3 metres length along the pole for protection of under ground cable as required.

Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep) and re-filling etc as required

50 mm dia

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.

Upto 35 sq. mm

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1KV grade of following size on wall surface as required.

Upto 35 sq. mm (clamped with 1mm thick saddle)

Supply and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed/XLPE aluminium conductor cable of 1.1 kv grade as required.

2 X 10 sqmm (19 mm)

3.5X 35 sq. mm (32 mm)

4X16 sq. mm (28 mm)

Supplying, installing, testing and commissioning of following capacity TPN tap off box made of 1.6mm thick sheet steel enclosure duly painted with powder coating on existing rising mains complete with TPN disconnector FSU and HRC fuses, connections, earthing etc. as required.

Dismantling of pole/ street light standard/ strut embedded in cement concrete foundation etc. as required.

Dismantling of over head lines comprising of copper/ aluminium over head conductor, G.I. wire, cross arms, insulators etc. as required.

Supply of PVC insulated PVC sheathed cable of 1.1KV grade armoured aluminum conductor cable as reqd confirming to IS –7098 part I with up to date amendments) of the following size.

2 x 10 sq. mm

Supply and Fixing of 15/ 20 Watt aesthically designed LED post top lantern with die cast aluminium spigot & prismatic diffuser IP65 and GI bracket as per requirement size of light 150 to 200 mm round type (Confoming to IP 65/IP66 protection and IS -16103-2012 with amnedments,if any or equivalent), as per direction of engineer-in- charge.

Supplying of 18 to 22 watt LED polycarbonate batten fixture with 100 lumens/watt (conforming to IS-16103 part 2 (2012) with upto date amendements or equivalent) as per direction of engineer-in- charge.

Supply and fixing of LED Street light fitting with mandatory driver set having die cast aluminium body and lenses suitable for 45 Watt and Confirming to IP 65/IP66 protection, as per direction of engineer-In-Charge

Supply,installation,testing & commissioning of loop in loop out box made of PVC sheet 200 X 150 X 100 mm/suitable size having suitable size 2 nos. terminals and 01 no. SP MCB 5/6A detachable gland plate, interconnection etc. as required.

Supply of Ceiling fan of 1200 mm Sweep along with down rods of standard length (upto 30 cm) as per direction of engineer-In-Charge.

Credit of following items

Aluminium Scrap ( i.e. from ACSR conductor on Poles etc) (L.S.)

ANU ENGINEERING CORPORATION