Karnataka

Active

Works

Lift Irrigation Scheme

Providing distribution network to individual tanks of various series coming under filling of 88 tanks from the Hemavathy River to the augment of drinking water supply needs of 42 villages in Arakalagud Taluk Hassan District and other essential improvement works.

Cauvery Neeravari Nigam Limited

CNNL No 1 HRBHLC Div Gorur | Gorur, Karnataka

Amount: ₹4.7 CrCloses: 3 Jul 20265d left

Tender Value

₹4.7 Cr

EMD Value

₹6.0 L

Closing Date

3 Jul 2026, 9:30 pm5d left

Similar Past Results

Similar tender results from the same govt authority in the past 3 years.

Tender Inviting Organisation

Name

Cauvery Neeravari Nigam Limited

Work Description

Providing distribution network to individual tanks of various series coming under filling of 88 tanks from the Hemavathy River to the augment of drinking water supply needs of 42 villages in Arakalagud Taluk Hassan District and other essential improvement works.

Tender Information

Tender ID

308561

Reference Number

CNNL/2025-26/LI/WORK_INDENT4266/CALL-2

Tender Type

Open

Product Category

Lift Irrigation Scheme

Location

CNNL No 1 HRBHLC Div Gorur

Source Website

Subscribe to view

Documents Required

12 documents required · 12 mandatory

Technical Bid

RequiredAnnual Turnover Certificate of last five years certified by CA Along With Valid UDIN

RequiredClass II & above KPWD registration certificate

RequiredGST registration certificate along with updated GST clearance copies

RequiredValid EPF Certificate with recent challans

RequiredValid ESI Certificate with recent challans

RequiredLine of credit

Requiredat least one similar work such as laying of PVC/DI/HDPE distribution network in any lift schemes/tank filling schemes

RequiredIT returns details , profit & loss statements and Balance sheets

RequiredList of Key Technical Personnel

RequiredWork done certificates pertaining to critical quantities

RequiredKey and critical equipment

RequiredBid Capacity

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

The intending bidder / tenderer should furnish the copy of the certificate of registration issued by state/central govt.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

The Intending bidders / tenderer are advised to visit the site of work and also access the tender documents well in advance.

Conditional tenders will not be accepted.

The tenderer shall bear all costs associated with the preparation and submission of his tender, and the employer will in no case be responsible and liable for those costs.

The TENDER PROCEESING FEE will not be refunded.

The employer is not responsible for any delay in accessing Karnataka Public Procurement Portal Portal.

All the formats prescribed in the bid document shall be filled by the bidders in a complete manner. Incomplete formats may constitute sufficient reason at the discretion of CNNL for rejection of the bid.

The requisite Earnest Money Deposit (EMD) Through ONLINE only With validity from the date of opening of the tender. The tender schedule will be issued to the applicants who make payment through ONLINE only. Tenders received without valid EMD through e- payment will be rejected. Under this section of qualifying criteria the tenderer should furnish capacity details / format.

All scanned documents to be uploaded shall be in original and the Executive Engineer will verify the original documents at any stage before recommending for approval. Bidders should produce their original documents for verification during office hours related to uploaded documents in e-portal immediately after opening of technical Bid.

Further particulars, if any, required by the bidders can be had from the office of the Executive Engineer, No 1 HRBHLC Division GORUR during office hours on all working days. It may be noted that if any of the calendar of any event mentioned above happen to be General Holiday / Declared holiday, the next working day will hold good for the respective events.

The intending bidders should note that, if any of the lands (either in part/parts or in whole) required for the work is not yet acquired by the Nigama, it shall be the responsibility of the successful bidder to take possession of such land by consent of the owners before commencement of work at no extra cost to the Nigama and no claims whatsoever relating to non-availability of land would be entertained.

Defect liability period will be Three years from the date of completion of the entire work, after issuing of work completion certificate from CNNL.

Tenderers shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by the Government of Karnataka.

The Tenderer should furnish the Name of the individual / firm/ Company with address and telephone number with place of registration, year of incorporation etc.,

The application made by the firm / company shall be signed by a person holding the power of attorney, in which case the Tenderer should furnish a copy of power of attorney signed by the board of directors in e-portal along with their bid.

The scanned signature of the bidders / authorized representatives of the bidders shall be attached while uploading the Bid document.

Necessary certificates should be signed by an officer not below the rank of the Executive Engineer or equivalent competent authority and should be countersigned by the superior officer not below the rank of Superintending Engineer or equivalent competent authority.

The intending Bidder/firm/company should furnish list of man power available with him for taking up above work.

The intending Bidder/firm/company shall provide accurate information on the related form about any litigation or Arbitration resulting from contracts completed or ongoing under its execution over the last five years. The consisting history of awards against the tenderer may result in failure of the application.

Tenderer should furnish a copy of the Income Tax Return for the preceding five financial year (2021-22to 2025-26)

The intending Bidder/firm/company shall provide the audited balance sheets or other financial statements acceptable to the employer for the last five years (2021-22 to 2025-26) and must demonstrate the current soundness of the applicant financial position and indicate its prospective long term profitability. If deemed necessary the employer shall have the authority to make enquiries with the applicants bankers.

The Tenderer should furnish a valid copy of GST Registration Certificate along with updated GST clearance copies.

Employees provident fund registration certificate along with copy of recent paid challan is to be furnished.

Employees Provident fund Registration Certificate a) In respect of Contractors who are not registered with the EPF (Employees Provident Fund) authorities, the contractors should produce an undertaking that he shall within 7 days of the close of every month submit to the Executive Engineer, No 1 HRBHLC division Gorur, a statement showing the recoveries of contributions in respect of employees employed by him and shall also furnish under the provision of the scheme to the commissioner, EPF. b) However, having given an undertaking to this effect if the contractor does not furnish the information, the Nigama will deduct the necessary amount from the amount due from the contractor. Not with standing the above, the contractor will be liable for any consequential penalty /damages levied by the EPF authorities.

The intending bidders are advised to visit the site of work before attending the pre- bid meeting and also before submitting the tenders.

The rates quoted by the contractor must be excluding GST. The contractor is also required to pay quarry Fees, Royalties, Octroi Dues levied by the state Government or any Local body or an authority and ground rent, if any, charged by the Executive Engineer for stacking materials. No Extra Payment on this account will be made to the contractor.

Applicable GST will be paid separately and GST will be deducted as per the prevailing Govt orders from time to time.

Increase in GST shall not be paid in extended period of contract for which the contractor alone is responsible for delay as determined by the authority while granting the extension of time

Materials required for the work shall be procured by the Contractor themselves and should get the same tested by the quality control authority of CNNL before use in this work.

The work includes all lead and lift / de lift and work shall be carried out as per instruction of engineer-in-charge of the work. And all the specification as per Indian road congress and all relevant Indian codes. The rate for the specifications in the Schedule-B includes all lead and lift, irrespective of distance and height. No extra claim will be entertained for additional lead and lifts.

If CNNL Shall engage third party consultants / PMC for quality control assessment as per G.O No.FD 55 Pro.Cell 2004, Bangalore dated17,02,2002, apart from the CNNL quality control and field tests, the contractor should co-operate with both Quality control authorities and the third party.

Performance security:-Within 20 days of receipt of the letter of acceptance, successful tenderer shall deliver to the employer a security deposit in any of the forms given below for an amount equivalent to 5.00% of the contract price plus additional security for unbalanced tenders (If quoted below) in accordance with the clause 25. 5 of ITT and clause 43 of the conditions of the contract. Cash/ Bankers cheque/ Demand draft/ Payorder in favour of Executive Engineer, No.1 HRBHLC Division, Gorur payable at Gorur or specified small saving instruments pledged to Executive Engineer, No.1 HRBHLC Division, Gorur

Security Deposit Will be withheld till the expiry of the defect liability period.

Building and other construction workers welfare cess The contractor shall subscribe 1.00% of gross amount of each bill payable to him in respect of contract to the building and other construction workers welfare cess as per GO No: LD 300 LET 2006, Bangalore, dated: 18-01-2007. The amount of subscription will be recovered out of payable amount to him in each bill. This component is deemed to have been included in the quoted rate / Item rate

Sub leasing /sub contracting in any form is prohibited. Bids of bidders with track record of Sub leasing / subcontracting are liable for rejection

The quarries considered are for the estimate purpose only. The intending bidders shall visit the site, identify the quarries, ascertain availability for the quantity and quality of the materials required for the work and shall quote his rates accordingly. No extra claim whatsoever will be entertained in this regard.

On account of restrictions on sand mining and scarcity of availability of sand, as an alternative the use of manufactured sand (M-sand) confirming to relevant IS specifications may be allowed during the remodeling work

Successful Bidder should submit the PERT Chart at the time of Execution of Agreement.

Successful bidder should execute work agreement within 20 days from the date of issue of Letter of acceptance, failing which his tender will be cancelled on Risk & Cost basis and his EMD will be forfeited.

Related to technical qualification condition, Idle charges for men & machineries for non- progress period delayed due to any reasons will not be paid.

As per FD GO dated 26.03.2019, NSIC exemption for EMD is not accepted.

Contractor should take all precautions to ensure that no damage is caused to the existing structures which have been constructed by other agencies during project execution. If any damage is caused, it has to be rectified at his own risk and cost.

All precautions should be taken by the contractor so that there are no damages to such public/private Properties and to avoid any damage to the utilities during excavation as well as utility shifting.

Contractor should fallow strictly the prevailing rules of labour act.

CNNL reserves the right of rejecting all or any of the tenders without assigning any reasons

Typo-graphical errors if any will not be the ground for any claims by the contractor.

The undersigned reserves the right to either postpone or to cancel the entire process of tender.

The contractor should obtain the material dispatch permit for stone, aggregates, sand and murrum etc., will be used in the construction work from the mines and geology department at the time of execution and same should be submitted along with the work bill, then for such work bills no royalty will be deducted. if the contractor failed to submit the material dispatch permit (MDP) along with the work bill five times royalty will be deducted from the work bill as per KMMCR 2016 amendment rule 44(4) and circular vide no.Ga,Bhu.E/DCB/DCB/takte/2019-20/4497 dated:12.12.19 by mines and geology department .Royalty Recovery from the contractors bill will be made as per Orders/Circulars issued by Government of Karnataka from time to time. bill will be made as per Orders/Circulars issued by Government of Karnataka from time to time.

Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder.

The validity period for E.M.D. shall be for a minimum period of 45 days beyond the validity of the tender

Tenders shall remain valid for a period not less than Ninety days.

Contractor has to set up field laborotary in site as per the GO PWD/243/SEV/2013/Banglore/date-22.07.2024

Technical Criteria

Past Experience

Total value of civl engineering works executed and payments received in the last five years (year-wise)

Audited CA Certificate of Annual Turnover

List of existing commitments and ongoing works

Others -- existing commitments and ongoing works

List of works for which tenders already submitted

Others -- tenders already submitted

Capabilities of Vendor

To qualify for award of this contract, each tenderer in his name should have in the last five financial years i.e 2021-22 to 2025-26 achieved in at least two financial years a minimum financial turnover of value not less than twice the estimated annual payment under this contract i.e. Rs: 794.08 lakhs. Along With Valid UDIN Number Note :Audited balance sheet certified by practicing Chartered Accountant shall be furnished. Additional weight age 10% for each year will be given for turn over to bring it to 2026-27price level..

Audited CA Certificate of Annual Turnover

The intending bidder/firm/Company should have Satisfactorily completed (at Least 90% of the contract value as prime contractor), at least one similar work such as Providing PVC/HDPE/DI distribution network to lift schemes /Tank filling schemes of value not less than Rs.198.52 Lakhs (Usually not less than 50% of Estimated Value of contract) during any one year of the last five financial years from 2021-22 to 2025-26. An additional weightage of 10% each year will be added to the cost of the work done to bring it to the 2026-27 price level. Note: The certificates should be obtained from the competent authority that is not below the rank of the Executive Engineer or equivalent rank officer, & should be countersigned by the Superintending Engineer or equivalent rank officer.

Satisfactory Performance Certificate

Each bidder/firm/company should have executed in any one year of the last five years from 2021-22 to 2025-26 the following minimum quantities of work 1 Earth Work Excavation- 15950.00 cum 2.Cement concrete of all grades-556.00 Cum 3. Steel-23.00 tonne 4. Laying of PVC/HDPE/DI PIPE dia not less than 140 mm-15.00 Km 5. Metaling of all grades-392.00 cum

Work Done Certificate

Owning the following key and critical equipment for this work (1.Lorry/tipper 02 no own & 02 no lease 2. Excavator 2no own &02 no lease 3. Self-loading concrete mixer 1no own &01 no lease 4. Water Tanker 1no own &01 no lease 5. Crane-01 no lease/hire)

Others -- key and critical equipment

A valid copy of GST registration certificate along with latest GST paid challan should be uploaded.

GST Registration

A valid copy of EPF registration certificate along with latest EPF paid challan should be uploaded.

Valid EPF Certificate

List of key Technical personnel required by the Tenderer who are suitable for both design and execution of work and number of technical personnel who will be deployed EXCLUSIVELY for these works with at least 2 Nos. B.E.(Civil Engineer with degree certificate with minimum 5 years experience ) & 01 No Mechanical Engineer with degree certificate with minimum 5 years experience ) and 4 Nos. Diploma (Civil Engineer with minimum 5 years experience)

Others -- key Technical personnel

The intending bidder should furnish the KPWD Class II & above Contractor certificate of registration issued by State/Central govt. organization.

PWD Registration Certificate (Class I/II/III/IV)

Financial Status

Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under: Assessed available tender capacity:-(AxNx1.5-B) where, A-Maximum value of civil engineering works executed in any one year during the last five years (updated to 2026-27 price level) taking into account the completed as well as works in progress. N- Number of years prescribed for completion of the works for which tenders are invited. B-Value, at 2026-27 price level, of existing commitments and on-going works to be completed during the next 11 months.

Others -- available tender capacity

The bidder / firm/ company should furnish details of liquid assets availability or availability of credit facilities of not less than equivalent of the estimated cash flow for three months in peak construction period (i.e. Rs: 119.12 Lakhs) for the work mentioned above for meeting the required funds in the form of credit lines / letter of credit / certificate from any Nationalized Banks/ Scheduled banks in the specified format Enclosed as per Finance Department Circular No: FD-CAM/16/2022(P-2) Dt: 22.08.2022.

Line of Credit

Reports on the financial standing of the tenderer, such as profit and loss statements / Balance Sheets and auditors reports for the last five years

Others -- profit and loss statements / Balance Sheets

A copy of the Income Tax returns filed for the year 2021-22 to 2025-26 should be uploaded.

ITR Filed Copy (Mentioning PAN)

Others

A valid copy of ESI registration certificate along with latest ESI paid challan should be uploaded.

Valid ESI certificate

Fee & Financial Details

Tender Fee Amount

₹5,000

EMD Fee Amount

₹6.0 L

Important Dates

Last Activity

24 Jun 2026

Published

24 Jun 2026

Bid Opening

4 Jul 2026

Download Ends

1 Jul 2026

Pre-Bid Meeting

30 Jun 2026

BOQ Preview

•

Earth work excavation for pipeline trenches in all kinds of soils by mechanical means above 600 mm trench width as per drawing and technical specifications, including setting out, construction of shor...

•

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

•

Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

•

Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

•

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5...

•

Providing and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of Ductile Iron (DI) conforming ti IS-1865 with the latest amendments and of grade GGG 40/50, shaft...

•

Providing and fixing of Single/ Double chamber triple function tamper proof (Both the orifces to be housed in the single chamber) Air valves with Body and cover in Ductile cast iron of grade GGG 40/ 5...

•

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...

•

Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacte...

•

Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...

•

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with vibratory rolle...

•

Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to mee...

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

•

Back filling behind abutment, wing wall and return wall complete including compaction as per drawing and Technical Specification Granular material .Complete with all lead, lifts, loading and unloadin...

•

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...

•

Providing casing embankment using semi-pervious / pervious approved soil from borrow areas in layers of 250 to 300 mm ( before compaction ) including cost of all materials, machinery, labo...

•

Supplying, fitting and placing TMT FE 550/550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying ...

•

Providing and filling murrum/gravelly soil (CNS soil) for foundation or around pipes including cost of all materials, labour, spreading soil in layers of 100 to 150 mm, breaking clods, watering, compa...

•

Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreadin...

•

Providing and fixing in position 20 mm thick premoulded joint filler in expansion joint for fixed ends of simply supported spans not exceeding 10m to cater for a horizontal movement upto 20mm, covered...

•

Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, inc...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

•

Providing Coursed rubble masonry (first sort) with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand). Complete with all lead, lifts, loading and unloading charges e...

•

Providing Coursed rubble masonry (second sort) with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand). Complete with all lead, lifts, loading and unloading charges e...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

•

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

•

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS ...

•

Providing and constructing non load bearing wall with solid concrete blocks of size 400x100x200mm having a block density not less than 1800kg/m3 having a minimum average compressive strength of 4.00 N...

•

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a primi...

•

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel...

•

Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corne...

•

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1...

•

Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and ...

•

Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in Granite, including necessary holes for pillar taps etc. in...

•

Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the wall...

•

Providing and laying red oxide flooring 40 mm thick, with an under layer of 30mm thick M-15 cement concrete and top layer of 10mm thick plaster with 1:3 cement mortar mixed with red oxide finished wit...

•

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after th...

•

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives with pure Acrylic Resin, UV resistant, dirt & pick up resistant, Alkali & Water resistant of required shade: New work...

•

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of appro...

•

Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

•

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...

•

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with cla...

•

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually co...

•

Providing and fixing brass bib cock of approved quality :15 mm nominal bore. Complete with all lead, lifts, loading and unloading charges etc., as per direction of Engineer in charge.

•

Providing and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white P.V.C. automatic flushing cistern, with fittings, standard size G.I....

•

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and ...

•

Concealed Conduit System Supplying heavy PVC conduit pipe 25mm dia 2mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc , and running before concretin...

•

Supplying heavy gauge PVC Conduit Pipe 25 dia 2 mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement...

•

Supplying and flush mounting powder coated metal/galvanised metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stove/C.C Wa...

•

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 6A One Way Complete with all lead, lifts, loading and unloading charges etc....

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 6A Three Way socket . Complete with all lead, lifts, loading and unloading ch...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 Stepped Fan Regulator Two Module .Complete with all lead, lifts, loading and...

•

Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board 6A Batten Holder (PWD Electrical SR VOLUME-VI, P.No.10. I No-3.14.7. For the Year 2023-24)

•

Supplying and fixing Metal Fan Box with Round Hook .Complete with all lead, lifts, loading and unloading charges etc., as per direction of Engineer in charge.

•

Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit/casing capping using 1100V Grade, COPPER conductor flexible multistrand FRLS PVC insula...

•

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

•

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' cure, indicator ON/OFF, energy cross-3 with Short circuit breaking cappacit...

•

Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 p...

•

Supplying and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of salt and ch...

•

GI/Copper strips for grounding connections, using necessary fixing materials as required. 25X3mm GI Strip .Complete with all lead, lifts, loading and unloading charges etc., as per direction of Engine...

•

Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 20A single phase Class-1 Accuracy with Temper Proof Energy Meter.Complete with all lead, lifts, loading and unloading charges etc., a...

•

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 (10 Sqmm,...

•

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff LT Cable 2.5 to 25 Sqmm .Complete with all lead, lifts, loading ...

•

Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, includin...

•

Supplying of 1x4feet -PVC Batten with integrated LED tube 20/22 W with high quality diffuser with Life of 25000 burning hours and 70 percent lumen maintenance with CRI 80. Power Input: 220-240V at 50/...

•

Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, r...

•

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball be...

•

Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board together with supplying and fixing 5 A. ceiling rose, necessary ...

•

Dismantling tile work in floors and roofs laid in cement mortar including stacking material to the appropriate disposal area as per direction of Engineer-in-charge For thickness of tiles 10 mm to 25 m...

•

Removing of existing old or broken wash basin / urinals/ Indian Water closet/ European Water closet and disposing it with all cost and conveyance labour for all items of work, HOM with all lead and li...

•

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking to the appropriate disposal area as per direction of Eng...

•

Removing white wash or colour wash by steel brushing and / or scraping, sand papering and preparing wall surface smooth including repairs to scraches including cost of labour, material complete as per...

•

Extra for removing white wash or colour wash by steel brushing and / or scraping, sand papering the ceiling and / or sloping roof surface smooth including repairs to scraches, cost of material, labour...

•

Removing the old paint or polish from wood and / or wood based surface with paint remover of approved brand / manufacturer and making surface even including cost of materials, labour, complete as per ...

•

Removing the old paint from steel and / or other metal surface with hand scraping and making surface even including cost of labour, complete as per specifications. .Complete with all lead, lifts, load...

•

Repairs to plaster in patches of 2.5 m2 and less in walls, ceilings 10 to 20mm thick in cement mortar 1:3 including cutting the patches in proper shape and replastering the surface of the wall includi...

•

Repairing and fixing shutters (panelled or glazed) to doors, windows, ventilators and cupboa.Complete with all lead, lifts, loading and unloading charges etc., as per direction of Engineer in charge.

•

Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle gr...

•

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle gre...

•

Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete a...

•

Providing and fixing in position fully panelled Mathi/Nandi wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per dra...

•

Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...

•

Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete.Fastener with threaded dia 6 mm .Comple...

•

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge SS Handles 200mm .Complete with all lead, lifts, loading and unloading charges etc.,...

•

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge SS Tower Bolts 200x10mm .Complete with all lead, lifts, loading and unloading charge...

•

Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with suitable washers weighing not less than 33 gms.Complete with all lead, lifts, loading and unloading charges etc., as per d...

•

Providing and fixing bright finished brass butt hinges with necessary screws etc. complete 125x85x5.5 mm.Complete with all lead, lifts, loading and unloading charges etc., as per direction of Engineer...

•

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge SS Aldrop 16mm dia, 200mm .Complete with all lead, lifts, loading and unloading char...

•

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. ...

•

Providing and fixing Wall Mixer Telephonic with L Shaped tubular bend set for overhead shower made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Clas...

•

Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end ) 25 mm nominal bore .Complete with all lead, lifts, loading and unloading charges etc., as per directio...

•

Providing and fixing PTMT grating of approved quality and colour, Rectangular type with openable circular lid.Complete with all lead, lifts, loading and unloading charges etc., as per direction of Eng...

•

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making go...

•

Providing and fixing Sink cock with swivel spout & wall flange, wall mountable made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class Economy .Comp...

•

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete:Semi rigid pipe:40mm dia .Complete with all lead, lifts, loading and unloading charges etc., as p...

•

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931.Complete with all lead, lifts, loading and unloading charges etc., as per direc...

•

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complet...

•

Providing and fixing Towel rail 600mm length made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class Economy .Complete with all lead, lifts, loading...

•

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer to give an even shade after thoroughly brooming the surface to remov...

•

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops an...

•

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint ...

•

Providing and Applying PU based Elastomeric Liquid Applied PU Waterproofing Membrane single component, cold applied, water based acrylic PU dispersion with highly elastic and UV resistant water proofi...

•

Providing & fixing foldable ladder 1500mm height with aluminium body and fibre foot steps.Complete with all lead, lifts, loading and unloading charges etc., as per direction of Engineer in charge.

•

Arc welding machine 9/10 kVA .Complete with all lead, lifts, loading and unloading charges etc., as per direction of Engineer in charge.

•

Supplying of special moulded variety PVC couplers as per IS 7834/1987 and fabricated as per IG124/ 1984 with ISI mark and with its latest amendments to walk site etc. complete.315mm dia PVC couplers ....

•

Supplying of special moulded variety PVC couplers as per IS 7834/1987 and fabricated as per IG124/ 1984 with ISI mark and with its latest amendments to walk site etc. complete.250mm dia PVC couplers.C...

•

Supplying of special moulded variety PVC couplers as per IS 7834/1987 and fabricated as per IG124/ 1984 with ISI mark and with its latest amendments to walk site etc. complete.200mm dia PVC couplers ....

•

Supplying of special moulded variety PVC couplers as per IS 7834/1987 and fabricated as per IG124/ 1984 with ISI mark and with its latest amendments to walk site etc. complete.140mm dia PVC couplers ....

•

Supplying of special moulded variety PVC couplers as per IS 7834/1987 and fabricated as per IG124/ 1984 with ISI mark and with its latest amendments to walk site etc.complete for 90mm dia PVC couplers...

•

Supply, Delivery at Site, erection, electrification, of 2.2 KW Vacuum Pump, Motor & Required GI Fittings & Valves. Work Includes Dismantling the old Pump making New Bed for New Pump and fixing the new...

•

Providing Grease GEM-RR3 for lubrication of Pumps .Complete with all lead, lifts, loading and unloading charges etc., as per direction of Engineer in charge.

•

Supply and fixing in position Side gland bush. 150 HP to 250 HP .Complete with all lead, lifts, loading and unloading charges etc., as per direction of Engineer in charge.

•

Manufacturing, supplying, laying in position, aligning, jointing, testing and commissioning of electric resistance welded / submerged arc welded mild steel ( Fe-410 grade ) delivery pipes of specifi...

•

Lettering with black Japan paint of approved brand and manufacture to give an even shade including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matt...

•

Supply of Table rubbed polished stone 18mm thick 75 by 50cm Granite stone.Complete with all lead, lifts, loading and unloading charges etc.as per direction of Engineer in charge.

•

Engraving letters in hard stone .Complete with all lead, lifts, loading and unloading charges etc., as per direction of Engineer in charge.

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

GM Extension bid doc 4266 FINAL call 2.docx

Tender Document • 2.18 MB

Ready to Participate?

Download all tender documents and submit your bid