Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.5 LAccepted-AOC VILLAGE PO BARMAR TEHSIL JAWALI DISTT KANGRA HP | L1 | Accepted-AOC accept | |
| 2 | L2₹6.2 L+₹34,171 (5.85%)Rejected-Finance | L2 | Rejected-Finance reject | |
| 3 | L3₹6.9 L+₹1.0 L (17.6%)Rejected-Finance VPO BARI TEHSIL FATEHPUR DISTT KANGRA HP | KANGRA | HIMACHAL PRADESH | 175013 | L3 | Rejected-Finance reject | |
| 4 | Not Admitted-Fee/PreQual/Technical GOVT CONTRACTOR VILLAGE PO RAJA KA TALAB TEHSIL FATEHPUR DISTT KANGRA HP | KANGRA | HIMACHAL PRADESH | 176001 | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
| Sl No | Description | Qty | Unit | Aman Deep L3 | SUBASH CHAND L1 | ARADHYA ELECTRICAL WORKS L2 |
|---|---|---|---|---|---|---|
| 1.00 | Supply of Pumping machinery:- Supply & Errection of Submersible pumping set of make Lubi/Sabar/KSB/BS/Crompton conforming to BIS: 8034-1976/5659-1976(latest) suitable for lifting clear, cold & fresh water fitted with bronze impellers or suitable allow directly coupled to squirrel cage electric induction motor of same make as that of pumpum confirming to IS: 9238-1979 (latestwith upto date ammendments) and totally water proof for submersible duty, isolated from the pump by intermediate casing with double mechanical seal in oil chamber, grease packed lubricated bearings & providing with stainless steel thrust bearing plate to with stand non- vertical loads with minimum wear and tear. It shouldalso be fitted with a device to tanke up expension of water with the heating of motor including water level guard, errection clamps, clips & depth guage etc. The pump shall be suitable for operation on data given below.(specification (A) Pumps 1 set of 30 HP (B) Motor | 1 | set | 4,65,000 ₹4,65,000 | 4,10,999 ₹4,10,999 Lowest | 4,25,000 ₹4,25,000 |
| 2.00Location of the siteThe site is located at a distance of 40 Kms fom Ranital Road Railway Station. | ||||||
| 3.00The altitude ofof place in which= Altitude of place is 500 Mtr above above mean Sea Level the motor is intended to work. | ||||||
| 4.00Type of current. = AC three phase supply with frequenty of 50 cycles per second. | ||||||
| 5.00Rate voltage = 415 V +/- 10% | ||||||
| 6.00Characterstics of water:- (a) Temperature=20 Degree C (b) Turbidity= Upto50 NTU © Hardness= Mg/Ltrs(as Caco3) (d) Alkalinity= Mg/Ltr(as Caco3) (f) PH=7 to 8 (g) Total solids- Mg/Litre (h) Other | ||||||
| 7.00Depth of tube- well assemble= 110 mtrs bgl. | ||||||
| 8.00LWL of in well/tube-well= 0.00 mtrs | ||||||
| 9.00Maximum draw down level =0.00 mtr | ||||||
| 10.00Centre level of pump = 98.00 mtrd | ||||||
Tender Value
₹4.7 L
EMD Value
₹9,490
Closing Date
18 Dec 2025, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
EE
Jal Shakti Division Jawalamukhi
R M LWSS Angreh
2025_HPIPH_122883_1
JAM-KNG02-742
Open Tender
Civil Works
Item Rate
90 days
Jawalamukhi
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
EE Jawalamukhi
₹9,490
Yes
18 Feb 2026
8 Dec 2025
18 Dec 2025
8 Dec 2025
18 Dec 2025
8 Dec 2025
Supply of Pumping machinery:- Supply & Errection of Submersible pumping set of make Lubi/Sabar/KSB/BS/Crompton conforming to BIS: 8034-1976/5659-1976(latest) suitable for lifting clear, cold & fresh water fitted with bronze impellers or suitable allow directly coupled to squirrel cage electric induction motor of same make as that of pumpum confirming to IS: 9238-1979 (latestwith upto date ammendments) and totally water proof for submersible duty, isolated from the pump by intermediate casing with double mechanical seal in oil chamber, grease packed lubricated bearings & providing with stainless steel thrust bearing plate to with stand non- vertical loads with minimum wear and tear. It shouldalso be fitted with a device to tanke up expension of water with the heating of motor including water level guard, errection clamps, clips & depth guage etc. The pump shall be suitable for operation on data given below.(specification (A) Pumps 1 set of 30 HP (B) Motor
Location of the siteThe site is located at a distance of 40 Kms fom Ranital Road Railway Station.
The altitude ofof place in which= Altitude of place is 500 Mtr above above mean Sea Level the motor is intended to work.
Type of current. = AC three phase supply with frequenty of 50 cycles per second.
Rate voltage = 415 V +/- 10%
Characterstics of water:- (a) Temperature=20 Degree C (b) Turbidity= Upto50 NTU © Hardness= Mg/Ltrs(as Caco3) (d) Alkalinity= Mg/Ltr(as Caco3) (f) PH=7 to 8 (g) Total solids- Mg/Litre (h) Other
Depth of tube- well assemble= 110 mtrs bgl.
LWL of in well/tube-well= 0.00 mtrs
Maximum draw down level =0.00 mtr
Centre level of pump = 98.00 mtrd
Discharge level of highes point= 154.00mtr
No of pumps requried 1 No pump set
Capacity= 5.2 LPS for each pump
Total head in mtr= 221.00 1mtr
Length of R/main= 650.00 mtr
Dia of Rising main:- 200mm dia MSERW pipe
No. of working hours per day= 16.00 Hours.
Limits of pump operation:- (-) 25% (+) 10 % of total head.
HP of motor/Drive unit:- Required 20 HP of pump at (+) 10% and (-)25 of total head.BHP with following margins/multiplying factor at duty point, whichever is higher. (a) upto 2 HP=1.5, (b)2 to 5 HP-=1.4, (c ) 5 to 10 HP=1.3, (d) 10 to 20=1.2 HP, (e) 20 to 100=1.15, (f) Above 100 HP =1.10
RPM of Pumping set (1450/2900) =29rpm.
Test Run= 8 Hours Continueously for 7 days.
providing and fixing of PVC jointless flat water proof submersible cable as per the BIS-1554 Part-I- 1988 with latest upto date ammendments for installation i/c cable glands jointing material within all leads and lifts as per direction of the Engineer in charge.
Erection of all equipment from Sr.No.1 including cost of tees, bends, tapers and any other fitings required as per site conditions and as per direction of the Engineer in charge.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.52 MB
Form6.pdf
Tender Documents • 0.42 MB
BOQ_180420.xls
BOQ • 0.28 MB
TC.pdf
Tender Documents • 0.52 MB
Form8.pdf
Tender Documents • 0.81 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .