Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.3 LAccepted-AOC | ₹8.3 L | L1 | Accepted-AOC QUOTED RATE STOOD 1STLOWEST |
| 2 | L2₹10.2 LRejected-AOC | ₹10.2 L | L2 | Rejected-AOC QUOTED RATE HIGHER THAN 1ST LOWEST |
Tender Value
₹9.3 L
EMD Value
₹18,658
Closing Date
27 Nov 2025, 3:00 pmClosed
The Executive Engineer, DWS Division Kanchanpur
Office of the Executive Engineer, DWS Division Kanchanpur, North Tripura PIN _799270
Lifting and lowering of submerssible pump motor and all allied works within the jurisdiction of DWS Sub-Division, Damcherra
2025_CEDWS_67464_1
50/EE/DWS/KCP/2025-26
Open Tender
Civil Works - Water Works
365 days
Damcherra
Please Refer Bid Document
6 documents required · 6 mandatory
₹1,000
₹18,658
2 Feb 2026
21 Nov 2025
27 Nov 2025
21 Nov 2025
27 Nov 2025
21 Nov 2025
Labour charge for lifting of submersible pump motor set of 70' to 90' column pipe complete as per direction of the Engineer-in-charge
Labour charge for lowering of submersible pump motor sets at a depth of 70' to 90' column pipe in/c fitting fixing of nut & bolts etc complete as per direction of the Engineer-in-charge
Supplying fitting fixing of following spare parts of approved quality suitable for pump motor set etc as per direction of the engineer in charge. B) Full threaded nut bolt of 10mm dia and 50mm long.
Providing & fitting fixing of G.I. flange ( 10 mm wall thickness )by welding with G.I. / MS pipe and placing position as per specification and the direction of the Engineer-in-charge..
i) For 50 mm dia
ii) For 65 mm dia
iii) For 80 mm dia
iv) For 100 mm dia
Providing & fabrication of column pipe including fitting fixing of G.I. flange by cutting the GI pipe ( conforming to IS : 1239 medium class ) into 3.05 mtr. long and welding the same with GI flange as per specification and direction of the Engineer-incharge ( G.I. pipe will be provided by the agency at his own cost & risk).
i) For 50 mm dia G.I. pipe with 10 mm thick GI flange
ii) For 65 mm dia G.I. pipe with 10 mm thick GI flange
iii) For 80 mm dia G.I. pipe with 10 mm thick GI flange
iv) For 100 mm dia G.I. pipe with 10 mm thick GI flange
Providing and fixing G.I. Bend /elbow in the pipe line including testing of joints complete as per CPWD specification and direction of the Engineer - in - charge.
i) 40 mm dia
ii) 50 mm dia
iii) 65 mm dia
iv) 80 mm dia
v) 100 mm dia
Providing and fixing G.I. Reducer with the pipe line including testing of joints complete as per CPWD specification and direction of the Engineer - in - charge.
i) 50 x 40 mm dia
ii) 65 x 50 mm dia
iii) 80 x65 mm dia
iv) 100 x 80 mm dia
Providing and fixing G.I. socket as per CPWD specification and direction of the Engineer - in - charge
i) 40 mm dia
ii) 50 mm dia
iii) 65 mm dia
iv) 80 mm dia
v) 100 mm dia
Providing and fixing G.I. union as per CPWD specification and direction of the Engineer - in - charge.
i) 40 mm dia
ii) 50 mm dia
iii) 65 mm dia
iv) 80 mm dia
v) 100 mm dia
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_68651.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.23 MB
DNIeT50.pdf
Tender Documents • 4.75 MB
BOQ_68651.xls
BOQ • 0.28 MB
Download all tender documents and submit your bid