Providing road side street lighting in the campus of National Institute of Fashion Technology at Chheb in Distt. Kangra (HP)

Amount

Supplying and fixing following 75Watt (6000K)LED Decorative Fixture is made out of die cast alum. housing with Power LED’s are mounted directly on extruded aluminium heat sink. A UV stabilised PC diffuser is provided for Glare free lighting with high visual comfort and it should be compatible with specifications i.e. power factor ≥ 0.9, harmonic distortion ≤ 10% and efficacy ≥ 100 lumens per watt, CRI > 80, suitable for input voltage AC 220-240V, 50/60 Hz complete with all accessories, connections, testing and commissioning etc.as required.

LuxMax VINTAGE Small LED Fixture- 75 Watt

Makes: Twinkle (LuxMax-166-H)/K-Lite/Bajaj

Supplying and erection of 5 mtr. Decorative Cast Iron Pole in having Cast Iron bottom of around 1000mm with bottom dia 385 mm and total height of pole is 5000mm. Top Portion of the pole made out of G.I. Ribbed pipe with Embellishments. A service window provided in the bottom portion of the Pole comprising heavy duty 4 way connector & suitable rating MCB on a bakelite sheet. Complete pole is painted /finished with Poly-Urethane/Polyester paint. The pole is suitable for mounting with 4 nos. Anchor bolts & complete with wiring of Pole with 3 corex2.5sq mm FR PVC insulated copper wire complete in all respects as required:-

5mtr. LuxMax-METROPOLIS-90 (Cast Iron) Pole

Makes: Twinkle LuxMax-METROPOLIS-90/K-Lite/Bajaj

Supplying and erection of street light bracket The Decorative ornamental Double ended bracket made out of steel with cast alum. embeliimenst as per drawing suitable for mounting of drop down hanging installation of luminaires. The brackets are primer coated and painted with polyurethane paint complete in all respects as required:-

Single Arm bracket

Double Arm bracket

Makes: Twinkle(LuxMax-BKT-3133-900)/K-Lite/ Bajaj.

Supplying and erection of following depth sheet metal cubical sub-main light panel/pedestal of suitable dimensions with plus-minus 5 cm variation, made from 1.6 mm thick M.S. sheet duly fabricated in a segregated manner for housing of switch fuse units, by welding each compartment on five sides & front side hinged, complete with locking arrangement, with sufficient No. vertical and horizontal intermediate switchgear housing compartments. The cubical pedestal shall have cable entry box at one or two sides, sub-lighting panel made out of M.S. CRC Sheet 16G, duly painted with Siemens grey powder coated paint with epoxy powder coated approved paint and bonding to the existing earth etc. The same shall be erected in the 1:2:4 cement concrete plat-form of suitable dimensions 15 cm high from ground level and 45 cm thick. The cubical pedestal shall be 15 cm from the top of cement concrete plat-form. The cubical panel shall be including MCCB 400A 1 No. as incomer, MCCB 100 Amp.2 No., MCCB 63 Amp. 6 No. as outgoing and the panel should be approved/tested from the CPRI Lab and should be confirm to IS 64139 and as required complete in all respects.

Main Panel - H-2250 X W-1350XD-600MM

The Panel shall include the following Switchgear & accessories; as per the Make of Schneider, L&T, Siemens, ABB etc.

MAIN INCOMER:- MCCB 400A 4P - 1 No., Spreader Terminal MCCB 400A 4P - 2 Nos., RHOM Ext. - 1 No., Digital Metering Set - 1 No.

OUTGOING:- MCCB 100A 4P - 2 Nos., Spreader Terminal MCCB100A 4P - 4 Nos., RHOM Ext. - 4 Nos., MCCB 63A 4P - 6 Nos., Spreader Terminal MCCB 63A 4P - 12 Nos., RHOM Ext. - 12 Nos.

All interconnections of fields side are supported by conical, L & finger type insulators of adequate size to support & sustain the weight of cables, Control wiring with copper flexible FRLS wire with thimbles, printed sleeves, tie & belt etc.

The prices of complete job as per the specifications above shall be inclusive of gasket, doorlocks, reading glass,wooden, copper flexible door earth, legend plates etc.

Supplying and erection of following depth sheet metal cubical sub-main light panel/pedestal of suitable dimensions with plus-minus 5 cm variation, made from 1.6 mm thick M.S. sheet duly fabricated in a segregated manner for housing of switch fuse units, by welding each compartment on five sides & front side hinged, complete with locking arrangement, with sufficient No. vertical and horizontal intermediate switchgear housing compartments. The cubical pedestal shall have cable entry box at one or two sides, sub-lighting panel made out of M.S. CRC Sheet 16G, duly painted with Siemens grey powder coated paint with epoxy powder coated approved paint and bonding to the existing earth etc. The same shall be erected in the 1:2:4 cement concrete plat-form of suitable dimensions 15 cm high from ground level and 45 cm thick. The cubical pedestal shall be 15 cm from the top of cement concrete plat-form. The cubical panel shall be including MCCB 100A 1 No. as incomer, MCCB 63 Amp.3 No. and 12 Way DB as outgoing and the panel should be approved/tested from the CPRI Lab and should be confirm to IS 64139 and as required complete in all respects.

Main Panel - H-1500 X W-800XD-300MM

The Panel shall include the following Switchgear & accessories; as per the Make of Schneider, L&T, Siemens, ABB etc.

MAIN INCOMER:- MCCB 63A 4P - 1 No., Spreader Terminal MCCB 63A 4P - 2 Nos., RHOM Ext. - 1 No., Digital Metering Set - 1 No.

OUTGOING:- MCB 63A DP - 3 Nos., MCB 6-32 Amp SP - 12 No., N.Link & E/Bar -2 No., MCB Short Busbar 12.

All interconnections of fields side are supported by conical, L & finger type insulators of adequate size to support & sustain the weight of cables, Control wiring with copper flexible FRLS wire with thimbles, printed sleeves, tie & belt etc.

The prices of complete job as per the specifications above shall be inclusive of gasket, doorlocks, reading glass,wooden, copper flexible door earth, legend plates etc.

Makes:- L&T / Legrand / Goldmedal

Supplying and drawing following size of PVC insulated, heat resistant, flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in existing surface / recessed, Steel/PVC conduit as required. Make: KEI/SCI/Havells

3x1.5 Sq. mm.

Providing and laying of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade direct in ground; to be laid 1 meter below the ground level including excavation and refilling the trench etc.as required, but excluding sand cushioning and protective covering:- Make: KEI/SCI/Havells

Armoured cable 6 sq. mm. (twin core)

Armoured cable 10 sq. mm. (twin core)

Armoured cable 16 sq. mm (four core)

Armoured cable 240 sq. mm (3.5 core)

Deepak Sood

JAMWAL ELECTRICAL WORKS