Loading…
Loading…
Tender ID
Tender Value
₹14.9 L
EMD Value
₹24,600
Closing Date
13 Feb 2026, 5:00 pmClosed
SECRETARY
KONNI GP
RE E TENDER 01/2025-26 CONSTRUCTION OF ANGANWADI CENTRE NO 71 WARD 7
2025_DP_807962_2
01/2025-26
Open Tender
Civil Works - Buildings
Item Rate
KONNAPARA WARD 7
Please refer Tender documents.
2 documents required · 2 mandatory
₹2,200
Yes
₹24,600
Yes
28 Jan 2026
28 Jan 2026
18 Feb 2026
28 Jan 2026
13 Feb 2026
28 Jan 2026
Laying and Jointing PVC Pipe. Heading
Stone Aggregate(single size):20 mm nominal size
Stone Aggregate(single size): 10 mm nominal size
Coarse sand (zone III)
Portland Cement
Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper
Vibrator (Needle type 40 mm)
Sundries
wall form panel 1250x500 mm
Corner angle 45x45x5 mm 1.50 m long
100 mm channel shoulder 2.5 m long
Double clip (bridge clip)
Single clip
M.S. Tube 40 mm dia
Structural steel such as tees, angles, channels and R.S. joists
Red oxide Zinc chromate primer
Adjustable span ESO+SI (2.35-3.40)
Adjustable telescopic prop 3 m (2.02-3.75m)
Beam clamp 300-380 mm (450-1070 mm)
Wall form panel 1250x450xmm
Corner angle 45x45x5 mm 2.50 long
Column clamp 450x1070 mm
Prop 2 m (2-3.5m)
Second class kail wood in planks
Second class kail wood in scantling
Hollock ballies 125 mm diameter
Twisted steel/deformed bars
Solid blocks of size 30x20x15cm
Fine sand (zone IV)
Water thinnable cement primer for interior wall surface, having VOC content less than 50 gms/litre
Anjili wood scantls
Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm
Bright finished or black enameled mild steel butt hinges 50x37x1.50 mm
Bright finished or black enameled mild steel screws 40 mm
Bright finished or black enameled mild steel screws 20 mm
Anjili wood planks
Flats up to 10 mm in thickness
Mild Steel round bar above 12 mm dia
Float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm)
200 mm Aluminium aldrop
Iron hooks & eyes 100 mm
Anodised Aluminium handles 125 mm with plate 175 x 32 mm
Chromium plated Brass screws 25 mm
Oxidised mild steel tower bolt (barrel type) 200x10 mm
Oxidised mild steel screws 30 mm
Brass mortice latch and lock 100 x 65 mm with6 levers and a pair of brass lever handles
Brass hard drawn hooks and eyes 150 mm
Ceramic Glazed Tiles Ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black
Ceramic Glazed Tiles Ist quality 300 x 300 mm in all shades and designs of White, Ivory, grey, Fume Red brown etc.
Precast chequered cement tiles 22 mm thick Dark shade using ordinary cement
Black colour dark shade pigment
35 mm thick factory made solid panel PVC door shutter of single piece extruded profile non decorative finished (Matt finished)
Powder coated M.S. butt hinges 100 mm X58 mm X 1.9 mm
Vitreous china flat back wash basin 550x400 mm
15 mm C.P.brass tap
C.P. brass waste 32 mm
C.I. bracket for wash basin and sinks
Stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm
PVC pipe 25 mm outer dia . 12 kgf/cm2
PVC pipe 110 mm outer dia 6kgf/cm2
PVC Elbow 110 mm dia
PVC bend 110 mm dia
PVC Tee 110x110x110mm dia
PVC vent cowl 110 mm dia
PVC pipe 20 mm outer dia 10 kfg/cm2
PVC pipe 63 mm outer dia . 6kgf/cm2
PVC Elbow 63 mm dia
PVC Tee 63x63x63 mm dia
Stone Aggregate(single size): 40 mm nominal size
PVC bend 63 mm dia
Vitreous China orrisa type w.c. pan size 580 mm
Flushing Cistern P.V.C. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe)
100 mm S.C.I. trap with vent heel
Polyethylene water storage tank with cover and suitable locking arrangemnet
Stone for masonry work
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.71 MB
MG.pdf
Tender Documents • 0.26 MB
MGNREGS.pdf
Tender Documents • 0.68 MB
BOQ_1392894.xls
BOQ • 0.41 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .