Procurement of Machinery and Equipments for Fitter Trade

Machinery and Equipment for Fitter Trade

Steel Rule 15 cm with metric graduation HSS

Divider 15 cm spring

Straight Scriber 15 cm. HCS hardened and temprerd HRC 40-45

Centre Punch 10 cm HCS hardened and temprerd HRC 40-45

Screw driver 15 cm

Chisel cold flat 20 cm HCS hardened and temprerd HRC 40-45

File flat 25 cm. second cut with handle

File flat 25 cm. smooth with handle

File half round second cut 15 cm.with handle

Hacksaw frame 30 cm fixed .

Safety googles. Transparent

Dot slot punch 10 cm.Material HCS hardened and temprerd HRC 40-45

Steel Rule 30cm with metric and british graduation HSS

Steel Rule 60 cm metric and british graduation HSS

Surface Plate 600 × 600 x 100 MM CI / Granite.with stand 3.5'

Angle plate 150X150X250

Spirite Level metal type -23, accuracy 0.1mm /m 300mm

File wardending 15 cm smooth with handle

File Knife edge 15cm smooth with handle

File cut saw 15cm smooth with handle

File feather edge 15cm smooth with handle

File triangular 20cm smooth with handle

File round 20 cm second cut with handle

file square 25 cm second cut with handle

File triangular 20 cm second cut with handle

File flat 30 cm second cut with handle

File flat20 cm bastard with handle

File flat 30 cm bastard with handle

File Swiss type needle set of 12

File half round 25 cm bastard with handle

File round 30 cm bastard with handle

file hand 15 cm second cut with handle

Card file 3"x 5" Brass or Steel

Spanner D. E 6-26 mm set of 10 pcs

Clamp "C" 20 cm

Scraper flat 15cm with hendle

Scraper triagngular 15cm with hendle

Scraper half round 15cm with hendle

Chisel cold 9 mm cross cut 9mm diamond HCS hardened and tempered

Chisel cold 19 mm flat HCS hardened and tempered

Chisel cold 9mm round nose HCS hardened and tempered

Stud Extractor EZY - out set of 8

Micrmeter 25-50mm outside Mitutoyo with list count 00.01mm

Vernier caliper 15cm Mitutoyo with list count 00.02mm

Adjustable pipe tap set BSP with die set cover pipe size 15, 20,25,32,38,50mm

Wheel dresser (One for 4 units) Diamond brazed

Machine vice 100mm swivel base

Different profile gauges (plate type)- for demonstration metric standard plate type 150mm 250 mm,300mm

Knurling tool diamond, straight & diagonal)

Indexable boring bar with inserts 1"shank

Machine maintenance mannuals, for lathe(all gear type), pedestal grinder ,dril lm/c, power saw.

Terparature gauge range 0-150*c

Dowel pin (straight) dia, - 1'' lenth -4 (mat: stainless steel)

Standard tap screws M3, M4, M5, M6, M8, M10, M12, M14, M16

Lapping plate dia 6" Dia

Medium carbon heat treated alloy steel metric studs and bolts along with nuts m6.m8.m10.m12.m14.m16.(standard )

Caps screw m6.m8.m10.m12.

Drill gauges letter drill gauge (A to Z ) no. dill gauge( 1-60),metric drill gauge 1.5mm to 12.5mm -30 holes

Cast iron globe valve (flanged type) 2" or above

C.L sluice/ gate valve (flanged type) 150NB, class# 150 flange: ANSI 125- B 16.1

stop cock 25NB (2-way, threaded enD

slip on forget steel flange 150 NB ANSI-B16.5,class #150

pipe threading die with handle ratchet type die head of 1/2'', 3/4'' and 1''

Jigs & fixture (sample) for demostration ( )may be manufactured in - house plate type ,box zig, channel zig , sand wach Zig woth hardened bushes HRC 45- 50

Pulleys (for v-belt or flat belt) to fit on 50mm dia. Shaft with key slot for v-belt or flat belt to fit on 50mm dia

Damaged old spur gear to fit 50mm dia. Shaft fit on 50mm dia

flat belt (100mm x 5000mm) to fit on pulley

Packing gasket(material PTFE gasket small role

Washer, clutch, keys, jib, cotter & circlip minimum 25mm size, carbon stel material

Bearing different types -each type of diameter 25mm (min.)

Lifting sling -8mm nominal dia. Single leg sling

Bearing extract or universal -gear puller 2 or 3 jaws adjustable

pulley extractor gear ( puller 2 or 3 jaws adjustable)

Prick punch HCS HRC 45-50, 150mm length

Snips straight 25cm

Digital micrometer

Digital Vernier caliper 0-150 mm L.C 0.001 mm .(Optional)

Compressor unit : suitable for pressure:8 bar, Delivery :50 lpm (or more ),Resevoir capacity :24 Litres (or more )230 v ,50 Hz, with pressure regulaor and water separator

Pneumatic Trainer Kit, each consisting of the following matching components and accessories: I. Single acting cylinder Max. stroke length 50 mm, Bore dia. 20 mm 1 No II. Double acting cylinder Max. stroke length 100 mm,Bore dia 20 mm, magnetic type 1 No III. 3/2-way valve manually-actuated, Normally Closed 2 Nos .IV. 3/2-way valve pneumatically-actuated, spring return 1 No V. One-way flow control valve 2 Nos. VI. 5/2-way valve with manually-operated switch 1 VII. 5/2-way valve pneumatically-actuated, spring return 1 No VIII. 5/2-way pneumatic actuated valve double pilot 1 No IX. 3/2-way roller lever valve direct actuation Normally Closed 2 Nos. X. Shuttle valve (OR) 1 No XI. Two-pressure valve (AND) 1 No XII. Pressure gauge 0-16 bar 1 Nos. XIII. Manifold with self-closing NRV, 6-way 1 No XIV. Pushbutton station for electrical signal nput with 3 illuminated momentary-contact switches (1 NO + 1 NC) and 1 illuminated maintained contact switch (1 NO + 1 NC), Contact load 2A 1 No XV. Relay station with 3 relays each with 4 contact sets (3NO+1NC or Change-over type), 5 A 1 No XVI. 3/2-way single solenoid valve with ED 1 No XVII. 5/2-way single solenoid valve with manual override and LED 1 No XVIII. 5/2-way double solenoid valve with manual override and LED 1 No XIX. Power supply unit, Input voltage 5 – 265 V AC, Output voltage: 24 V DC, Output current: max. 4.5 A, short-circuit-proof. 1 No XX. profile plate, Anodised Aluminium 1100x700 mm, with carriers, mounting frames and mounting accessories (To be fitted onto the pneumatic workstation

Penumatic Workstation with 40 square mm aluminium profile lega, wooden work surface and pedestal drawer unit having 5 drawers, each with handels and individual locks, on metallic full panel drawer slide:(1) Work Table - Size (Approx.)L1200mm XW900mmXH900mm, with four castor wheels including two lockable wheels at the front side, (2) Drawer - size (Approx.)- L460mmxW495mm xH150mm each,and overall size of Drawer unit(Approx.)-L470mmxW495mmxH825mm and (3) Drawer slide height (approx) 85mm

Cut section model for pneumatic components :- 1.Single acting cylinder , 2. Double acting cylinder Max .stroke length 100 mm, bore dia 20 mm ,magnetic type, 3. 3/2-way valve manually -actuated , normally closed 4.3/2 Way valve :manually -actuated , normally closed , 5. one way flow control valve :manually -actuated , normally closed 6. 5/2 - way valve :manually -actuated , normally closed 7. 5/2 -way valve :manually -actuated , normally closed 8. 5/2 - way pneumatic actuated valve, 9. 3/2-way roller lever valve :manually -actuated , normally closed, 10. Shuttle valve manually -actuated , normally closed, 11. Two-pressure valve (AND) manually -actuated , normally closed, 12. Manifold with self-closing.

Hydraulic Trainer Kit, each consisting of the following matching components and accessories I. Hydraulic Power pack with (1) external gear pump having a delivery rate of 2.5 lpm, (approx.) @ 1400 rpm operating pressure 60 bar, coupled to a single-phase AC motor (230 V AC) having start capacitor and ON/OFF switch and over load protection, (2) pressure relief valve adjustable from 0– 60 bar, (3) oil reservoir, ≥5 litres capacity having sightglass, drain screw, air filter, and P and T ports.1 No.II. Pressure relief valve pilot-operated 1 No III. Drip tray, steel size 1160 mm x 760 mm. 1 No. IV. Pressure Gauge Glycerin-damped, Indication range of: 0 – 100 bars1 No. V. Four-Way distributor with five ports, equipped with a pressure gauge1 No.VI. Double acting hydraulic cylinder with a control cam, Piston diameter 16 mm, Piston rod diameter 10 mm, Stroke length 200 mm.1 No.VII. Suitable Weight for vertical loading of hydraulic cylinder 1 No. VIII. Mounting kit for weight for realizing pulling and pushing load. 1 No IX. 3/2-way directional control valve with hand lever actuation. 1 No. X. 4/2-way directional control valve with hand lever actuation. 1 No. XI. 4/3-way directional control valve closed-centre position, with hand lever actuation 1 No .XII. Non-return valve. 1 No. XIII. Pilot-operated check valve Pilotto open. 1 No.XIV. One-way flow control valve With integrated check valve. 1 No. XV. T-Connector with self-sealing coupling nipples (2 Nos.) and quick coupling socket (1 No.).2 Nos. XVI. Profile plate, Anodised Aluminium,1100x700 mm, with carriers, mounting frames and mounting accessories (To be fitted onto the Hydraulic workstation)

Hydraulic Workstation with 40 square mm aluminium profile legs, wooden work surface, and one pedestal drawer unit having 5 drawers, each with handles and individual locks, on metallic full panel drawer slide:1) Worktable e(Approx.)L1200mmXW900mmXH900mm, with four castor wheels including two lockablewheels at the front side, (2)Drawer – Size (Approx.) –L460mmxW495mmxH158mm each, and overall size of Drawer unit (Approx.)L470mmxW495mmxH825mm and (3) Drawer slide height(Approx.) 85mm.

Cut- section models for hydraulic components Pressure relief valve pilot-operated 2. Four-Way distributor with five ports 3. Double acting hydraulic cylinder with a control cam, Piston diameter16 mm 4. 3/2-way directional control valve with hand lever actuation 5. 4/2-way directional control valve with hand lever actuation. 6. 4/3-way directional control valve closed-centre position. 7 Non-return valve 8. Pilot-operated check valve Pilotto open 9. One-way flow control valve With integrated check valve .

Star Technology

ASHA ENTERPRISES

Mars Edpal Instruments Pvt Ltd

Mars Edpal Instruments Pvt Ltd

Vee Kay Systems

ASHA ENTERPRISES