Addn/Altn/ Upgradation of Capts Accn to Maj Accn and Provn of B Veh repair shed size L-12 Mtr x W-10 Mtr and H-5 Mtr under Dehradun.

Amount

Demolition of reinforced cement concrete, of any description and in any position complete all as specified and directed.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

Excavation in trenches in soft/floose soil n.exc 1.5m depth and nexc 1.5m width for foundation etc and getting out complete all as specified and directed.

Excavation over areas n.exc 1.50 m depth for foundation,etc getting out in hard/dense soil complete all as specified and dircted.

Material and labour hard core of broken brick gauge n.exc 63mm deposited, spread and levelled in layers nexc 15 mm thick , water and rammed to a true surface complete all as specified and as directed.

Material and labour PCC (1:4:8) type D2 (using 40 mm graded stone aggregate) for fdn/ mass concrete complete all as specified and as directed.

Material and labour PCC 1:4:8 type D-2 a( using 40 mm graded as in sub base etc 100 mm thick) complete all as specified and as directed.

Material and labour for Reinforced cement concrete (nominal mix ) type A1, 1:1 .1/2 :3 (20 mm graded stone aggregate) in foundations,incl rafts, footings,foundation beams,plinth beams, bases for columns etc basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

Material and labour for reinforcement cement concrete (nominal mix ) type A1, 1:1 .1/2 :3 (using 20 mm graded stone aggregate) as in columns, pillars, peirs, posts and struts complete all as specified and directed.

Material and labour for Reinforcement cement concrete (nominal mix ) type A1, 1:1 .1/2:3 ( 20 mm graded stone aggregate ) in beams, cantilever bressummers lintels over 1.5 M span complete all as specified and directed.

Material and labour for RCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in slabs supported on walls, beams and colums, in floors, roofs, landing balconies, canopies, deck slabs, chajja and in shelves and the like, complete all as specified and directed.

Material and labour for RCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in Chajjas etc complete all as specified and directed.

Use & waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter etc for rough finished surfaces of concrete etc. complete all as specified and directed.

Use and waste of form work for side and soffits of floor beam, roof beam and the like RCC Slab such as roof slab, chajja, floor slab etc. for fair finished surfaces, complete all as specified and directed.

Use and waste of form work for RCC Slab such as roof slab, chajja, floor slab etc. for fair finished surfaces complete all as specified and directed.

Use & waste of formwork to sides of pillers, posts, struts, piers, columns and stanchions etc for fair finished surfaces of concrete complete all as specified and directed.

Use and waste of form work to edges of concrete flats, treads, break in floor & roofs n.exec 20 cm wide horizontal or sloping and smilar works complete all as specified and directed.

Material and labour for PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in cills, copings, benching on chajjas, roof kerbs, bed blocks and the like including weathering, slightly rounded or chamfered angles and throating as directed with and including necessary form work complete all as specified and directed.

Supply and fix mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips (TMT) complete all as specified and directed.

Material and labour for TMT bars 6 to 8mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified and directed.

All as per ser item No 20 here-in-above 5 mm dia and over upto and including 10 mm dia in stripps spacers and binders complete all as specified and directed.

Returning filling including spreading levelling watering and well ramming in layers not exceeding 25 cm thick in loose/soft soil complete all as specified and directed.

Removing excavated soil to a distance n exc 50mtr depositing where directed at a level n exc 1.50 mtr above the starting point complete all as specified and directed.

Cutting channels grooves or rebates exc 15 cm but n exc 30 cm girth and trimming surface where reinforcemet if cut through complete all as specified and directed.

Cutting into old masonry to form toothing for and bounding in new brick or stone work including making good in lime or cement mortar of the same mix as for new walling complete all as specified and directed.

Material and labour brick work with sub class 'B' brick straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6 including all quoins, arches, pillars etc complete all as specified and directed.

Material and labour brick work with sub class 'B' brick straight or curved on plan to any radius built in cement mortar 1:4 as in half brick thick wall including all quoins, arches, pillars etc. complete all as specified and directed.

Taking down cement or cement lime plaster/tile work on brick or stone wall etc. including racking out joints, hacking for key and scrubbing down with water etc. complete all as specified and directed.

Material and labour 5 mm thick plastering on ceiling surfaces in CM (1:4) finished even and smooth without using extra cement complete all as specified & directed.

Material and labour rendering 15 mm thick on cement mortar 1:6 finished fair/ unfair faces of brick work finished even and fair without using extra cement complete all as specified and directed by Engineer-in-Charge.

Material and labour rendering 15mm thick on cement mortar 1:4 mixed with water proofing compound on fair/ unfair faces of brick/ concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. Note: WPC will be measured and paid separately under respective item of this schedule.

Supply only liquid water proofing compound (Dr Fixit or equivalent) @ 0.20 ml per bags of cement complete all as specified and directed.

Material and labour for applying interior grade wall care putty1 to 1.50 mm thick to make the surface smooth incl preparation of old/ newly plastered surfaces complete all as specified and directed by Engr-in-Charge.

Material and labour for applying exterior grade wall care putty 1 to 1.50 mm thick to make the surface smooth incl preparation of old/ newly plastered surfaces complete all as specified and directed by Engr-in-Charge.

Material and labour applying two coat of oil bound distemper over a coat of alkali resistant primer on newly plastered or unplastered wall or putty surface including preparation complete all as specified and directed.

Material and labour for applying two coat of exterior weather proof 100% anti fungal acrylic smooth emulsion with silicon additives that offer anti alge high performance exterior wall finish with 6 years of performance warranty by manufacturer applied by using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacture with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper, should be able to spray in hard to reach areas and penetration of distemper on the surface to achieve excellent application using limited manpower incl preparation of surfaces complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) rubbish off the premises complete all as specified and directed.

Supply and fix non-skid coloured ceramic tiles 7 to 8 mm thick (Square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in neat cement slurry and pointed in white or coloured cement to match the existing surfaces over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M &L Glazed Ceramic tiles coloured, of size 300 mm x 450 mm x 7 mm thick approved 1st quality as in vertical surfaces such as skirting/ dados etc, set and jointed in neat cement slurry and pointed with white/ coloured cement to match the colour of tiles complete all as specified and directed.

Material and labour double charged vitrified ceramic coloured tiles 10 mm thick (square/rectangular) polished,area of each tiles exceeding 0.36 sqm and not exceeding .42 Sqm , in floor etc. Set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

All as per item No 40 here in above but as in skirting over and including 10 mm thick rendering in cement mortar 1:4, complete all as specified and directed.

Material and labour for Machine cut kota stone slab flooring 20 mm thick over and including cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, grinding and mirror polishing complete all as specified and as directed. Note: Size of Kota stone shall not be less than 550 mm x 550 mm.

Material and labour for Kota stone slab 16-18 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with neat cement slurry mixed with pigment to match the shade of the slab complete all as specified and directed.

Material and labour for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

Material and labour 75mm thick PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in plinth protection or similar work/places, laid in alternate bays and filling the joints with & including bitumen and sand 1:3 by weight, surface finished even and fair without using extra cement in ground floor and paving below or above ground level complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning for refixing with all fittings for 15 mm bore GI tubing complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning for refixing with all fittings for 20 mm bore GI tubing complete all as specified and directed.

Material and labour for cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good cutting not exc 10cm girth complete all as specified and directed.

Supply and fix medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 15 mm bore GI tubingcomplete all as specified and directed.

Supply and fix medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 20 mm bore GI tubing complete all as specified and directed.

Supply and fix in repair double bowl stainless steel kitchen sink made of stainless steel 1mm thick 304 Grade, coupling plug, washers and waste pipes including bedding in cement morter on to draft wall or including fixing cantilever brackets and connecting union to pipe, overall size 1000mm x 545mm x 230 mm, bowl sice 460mm x 460mm x 230mm complete all as specified and directed.

Supply and fix in repair vitreous china squatting pan “ORISSA PATERN” of size 580 mm x 440 mm, white, with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti syphonage pipe etc and making good to floor complete all as specified and directed.

Supply and fix in repair of Vitreous china wash down water closet pan (pedestal pattern) dual flush single piece EWC fancy type, white including flushing cistern, Plastic water closet seat, white, closed pattern with flat bottom, and cover etc complete all as specified and directed by Engineer in Charge.

Supply and fix in repair 10 litre capacity PVC low level cistern ‘ white’ with inlet, float valve including brackets with 32 mm dia PVC pipe/bend 600 mm long complete all as specified and directed.

Supply and fix in repair75 mm bore UPVC (SWR) pipe pressure 4kgf/cm2 single socketed in any length with rubber ring, fixed on wall / laid in trenches complete all as specified and directed.

Supply and fix in repair 110 mm bore UPVC (SWR) pipe pressure 4kgf/cm2 single socketed in any length with rubber ring, fixed on wall/ laid in trenches complete all as specified and directed.

Supply and fix PVC (SWR) pipes 100 mm single socketed, in any length with rubber ring joints, laid in trenches or in floor complete all as specified and directed.

Supply and fix in repair 75 mm bore UPVC (SWR) bend with oval acess door ,'T'socket reducer etc complete all as specified and directed.

Supply and fix in repair 110 mm bore UPVC (SWR) bend with oval acess door ,'T'socket reducer etc complete all as specified and directed.

Supply and fix in repair vitreous china wash hand basin white, flat back of size 550mmx400mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling and 32 mm dia PVC waste pipe including fixing of waste fitting etc complete all as specified and directed.

Supply and fix in repair pillar taps, brass, with capston heads, fancy type chromium plated, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and flynuts screwed for 15mm bore iron pipe and fixed complete all as specified and directed.

Supply and fix in repair CP brass 3 in 1 hot & cold 15 mm dia wall mixer for mixing hot and cold water with telephonic shower provn with connecting legs &flanges complete all as specified and directed.

Supply and fix in repair 15mm dia brass chromium plated centre hole wash basin/ sink mixer with accessories in wash basin for mixing hot and cold water, screwed down for 15 mm dia bore GI Pipe complete all as specified and directed.

Supply and fix in repair brass chromium plated ovehead shower with shower arm complete all as specified and directed.

Supply and fix in repair 15 mm bore Angle cock/stop valves, cast copper alloy, fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

Supply and fix in repair 15mm bore Bib taps long body cast copper alloy fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

Supply and fix in repair CP Health Faucet with 1.20 mtr metalic expandable tube & hook complete all as specified and directed.

Supply and fix in repair CP grating 100mm to 125 dia round fix on floor/ nahani trap with hole/without fixed with cement mortar, complete all as specified and directed.

Supply and fix in repair looking mirror mounted on decorative type PVC frame of size 600 x 450 mm fixed to wooden plug with CP brackets screw fixed, complete all as specified and directed.

Supply and fix in repair 20 mm dia brass chromium plated towel rack of 3 sets type 60cm long between flanges including pair of fixing brackets complete all as specified and directed.

Supply and fix in repairs brass chromium plated towel ring complete all as specified and directed.

Supply and fix in repairs chromium plated Toilet paper holder complete all as specified and directed.

Supply and fix in repair 32 mm Waste fittings/coupling, brass, chromium plated for sinks, basins, etc. with long screwed shanks and fly-nuts complete all as specified and directed.

Supply and fix in repair SS grade 204 drapery rod 20mm dia including decorative brackets, decorative finals at both ends & curtain rings 8 Nos (Minimum) complete all as specified and directed.

Supply and fix rotational moulded polyethylene water storage tanks Capacity of tank 500 litres tripple layer, white colour, (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including dismantling of existing unserviceable tank and removing from site, complete all as specified and directed.

Supply and fix rotational moulded polyethylene water storage tanks Capacity of tank 1000 litres tripple layer, white colour, (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including dismantling of existing unserviceable tank and removing from site, complete all as specified and directed.

Material and labour in repair 75 mm CI spun casted floor trap with grating including jointing with solvent cement 75mm bore outlet complete all as specified and directed.

Supply and fix ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed for 20 mm bore size (Minimum weight 210 gms) complete all as specified and directed.

Material and labour for aluminum alloy powder coated standard hollow section as mentioned below window frame (Bombay sliding) with two glazed shutter andone nos wire gauged shutter sliding type, with aluminum sections as per Series-A(15mm) 3 track of Jindal section numbers for sliding windows, and glazed with tinted glass coloured glass 4mm thick, fixed with glazing clips, rubber beading / gasket anodised beading, screw and lock type handle of size 75mm, 2 Nos aluminum tower bolt 150mm long etc complete all as specified and directed. Shutter Top & bottom size : 37.50x15x1.60mm Shutter inner lock size 37.50x15x1.60 mm Shutter side (Handle) size 37.50x15x1.36 mm Chowkhat bottom size : 50.30x26x1.20mm Chowkhat top & sides size: 50.30x26x1.00mm

Excavating in post holes (or similar holes) each n.exc 0.5cum, getting ut,returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding, 25cm watering and removing surplus soil to a distance n exc 50m and making good surface in hard/dense soil complete all as specified and as directed by the Engr-in-Charge.

Supply and fix auto closing hinges 35mm of 0 crank (KH-001) OR 8 crank (KH-002) open able at 110 degree for kitchen cabinet shutters stainless steel complete all as specified and directed.

Supply and fix Ball bearing runner 45 mm Telescopic (KTS-20) full extension load capacity 50 kgs,complete all as specified and directed.

Supply and fix stainless steel handle fency type 100 mm size for kitchen cabinet shutters complete all as specified and directed.

Supply and fix magnet catcher for cub board with brass body and striking plate including letting in and fixed complete all as specified and directed.

Supply and fix in repair chrome plates stainless steel wire basket (storage basket) pull out type for large utensils, size 480x500x150mm of Grade 304 with necessary fixing clips etc complete all as specified and directed..

Supply and fix in repair chrome plates stainless steel wire basket (cup and saucer basket) pull out type for large utensils, size 380x500x100mm of Grade 304 with necessary fixing clips etc complete all as specified and directed.

Supply and fix in repair chrome plates stainless steel wire basket (plate basket) pull out type for large utensils, size 380x500x100mm of Grade 304 with necessary fixing clips etc complete all as specified and directed.

Supply and fix chrome plates stainless steel wire basket (cutlery basket) pull out type for large utensils, size 380x500x100mm of Grade 304 with necessary fixing clips etc complete all as specified and directed.

Supply and fix in repair chrome plates stainless steel wire basket (Grain Trolley) pull out type for large utensils, size 480x500x100mm of Grade 304 with necessary fixing clips etc complete all as specified and directed.

Supply and fix in repairs glass corner shelf suitable size made of 5mm thick toughned glass complete all as specified and directed.

Supply and fix in repair Glass shelf assembly consisting of 5.5mm thick toughned glass with chromium plated guard and railing size 500x125mm with brass bracket complete all as specified and directed.

Taking down chowkat with shutter area exc 1.5 sq.m but n.exc 4 Sqm each without taking off shutter from framed complete all as specified and directed.

Taking down chowkat with shutter area n.exc 1.5 sqm each (without taking off shutter from frame)complete all as specified and directed.

Material and labour cutting holes in brick wall built in cement mortar exc half brick but nexc one brick for inserting or cement concrete 1:2:4 hold fast etc and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified and directed.

Supply and fix Pressed steel frames of size 105x60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed. (Note: framed filled in cement concrete1:3:6 type C-0 ( using 12.5 mm stone aggregate) to be included in quoted rate.

Supply and fix Pressed steel frames of size 125x60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed. (Note: framed filled in cement concrete1:3:6 type C-0 ( using 12.5 mm stone aggregate) to be included in quoted rate.

Material and labour 35mm thick 2nd class hard wood factory made plain framed panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply.The size of rail and stile as per IS:1003 (Part1),kiln seasoned and chemically pressure treated, complete all as specified and directed.

Supply and fix 35m thick factory made glazed and skeleton shutter open rebated and prepared to receive glass/ gauge etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitered beads or clearing glass etc, size of members of shutters as specified in SSR part I section 8 clause 8.20 (a) of IInd class hard wood (Shisham) complete all as specified and directed.

Supply and fix factory made 100% solid wood plastic composite (WPC) door frame of size 75 mm x 50 mm made from wood plastic composite (single extruded process) material with density 780 Kg/Cum from ISO certified company door should be water proof termite proof fire retardant and having good screw holding capacity all as specification and drawing complete all as specified and directed by Engr-in-Charge.

Supply and fix 24 mm thick moulded WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on single side with wood grain texture and back side plain with density not less than 600 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire retardant and having screw holding capacity by Engr-in-Charge.

Supply and fix factory made steel window made out of steel square/rectangular hollow section including MS hinges, steel handle and steel peg stay, complete without glazing bars, dovetailed or welded including taking down old window complete all as specified and directed.

Supply and fix factory made steel window made out of steel square/rectangular hollow section including MS hinges, steel handle and steel peg stay, complete with glazing bars, dovetailed or welded including taking down old window complete all as specified and directed.

Supply and fix of power coated ventilator fixed type and frame made with aluminium section with and including partly glass and partly stainless steel wire mesh and including aluminium grill of aperture not more than 40 sqcm (as specified below), aluminium sections shall be of size as given below including taking down old window/ventilator etc complete all as specified and directed by Engineer in Charge. Frame : 44.5 x 44.5 mm x 1.98 mm thick including 5mm thick frosted in glass fixed with rubber gasket with aluminium beading and stainless steel wire mesh of 0.63 mm nominal dia wire and average width of aperture 1.40 mm complete including taking down old window/ventilator etc complete all as specified and directed by Engineer in Charge. Note :- (i) Making good of wall surface with matching to existing surface (ii) Cost of glass and gauge shall be included in the quoted rate.

Supply and fix 150 mm MS powder coated Hasp and staples safety type, stove annnealed black including bolt to hings plate and fixed with screwed complete all as specified and directed.

Supply and fix 200mm mild steel powder coated barrel tower bolts of extruded section and fixed complete all as specified and directed.

Supply and fix 125mm mild steel powder coated barrel tower bolts of extruded section and fixed complete all as specified and directed.

Supply and fix 150mm mild steel powder coated handles cast type anodised complete all as specified and directed.

Supply and fix 125mm mild steel powder coated handles cast type anodised complete all as specified and directed.

Supply and fix 100 mm size MS butt hinges medium weight cold rolled fixed/ welded to frame complete all as specified and directed.

Supply and fix 250 mm long mild steel powder coated sliding door bolt with hasp & stapple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolt of extruded section complete all as specified and directed.

Supply and fix in galvanised mild steel wire cloth 0.45 mm nominal dia of wire and average aperature 1.18 mm complete all as specified and directed.

M/L applying two coats of synthetic enamel paint over a coat of pink primer to new wooden surfaces including preparation, exc 10 cm width or girth, complete all as specified and directed.

Material and labour applying two coats of synthetic enamel paint over a coat of red oxide or zinc chromate primer including preparation of new steel or iron surfaces exc 10 cm width or girth, complete all as specified and directed.

Material and labour in repair floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring, fixed to floor of size 140 mm complete all as specified and directed.

Taking down/ dismantling asbestos (corrugated, semicorrugated, etc.) sheets in roof coverings etc complete all as specified and directed.

Dismantling Mild steel work of any description not otherwise provided for complete all as specified and directed.

Supply and fix mild teel work as in rafter, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe 410-W(Gde E-250) quality-A complete all as specified and directed.

Supply and fix pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

Material and labour for surface preparation and treating of joints, filling of honey combs and providing 25 mm thick PCC (1:2:4) type B-0 with WPC over roof surface complete all as specified and directed.

Supply and fix mild steel framed work as in grill, grating etc with end of bars shouldered and /or riveted or tonged into spikes, frame guard bars barrel iron doors, ladders, frame balusters, walk ways, railing. Frame work of water tanks and similar works confirming to Fe 410-0 or Fe 310-0 complete as specified and directed

Supply and fix mild steel work as in main and cross beam, hip and jack rafters, purlins etc. fixed with angle cleat or other connecting plate complete confirming to Fe – 410-O or Fe – 310-O long complete all as specified and directed.

Material and labour sheet glass ordinary quality 3mm thick and glazing with oil putty in squares n.exc. 0.5 sqm each pane complete all as specified and directed.

Supply and fix PVC (SWR) bend 110 mm dia, any radius with oval access door complete all as specified and directed.

Supply and fix PVC (SWR) bend 75 mm dia, any radius with oval access door complete all as specified and directed.

Supply and fix PVC (SWR) vent cowl 75 mm bore complete all as specified and directed.

Supply and fix PVC (SWR) vent cowl 110 mm bore complete all as specified and directed.

Supply and fix PVC (SWR) branch pieces 75 mm bore single (equal or unequal) with oval access door complete all as specified and directed.

Supply and fix PVC(SWR) branch pieces 110 mm bore single (equal or unequal) with oval access door complete all as specified and directed.

Supply and fix in repairs plate rack 200mm and size 60 x 75 cm made out off 1.00 mm thick stainless steel complete all as specified and as directed.

Material and labour for anti termite treatment providing and injecting chemical emulsion for Post Constructional Anti termite Treatment along external wall where along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed.

Material and labour anti termite treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and directed.

Material and labour anti termite treatment of voids in masonry using chemical emulsion one litre per hole, at 300 mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing walls/ floors complete all as specified and directed.

Supply and fix factory made 100 % solid wood plastic composite (WPC) flush type shutter of 18mm thickness one side prelaminated consisting of panel of WPC profile of 18mm (+ 0.7mm) thick of denisity 580 kg per cum manufactured by ISO-9000 certified company using for shutter cillicia ply 18mm thick and fixed with frame. The thickness of shutter is edges painted by matching colour of WPC lining of plain/prelim coloured WPC sheet using incl demolation old board any type etc complete as per manufacture specification.

Supply and fix factory made 100 % solid wood plastic composite (WPC) flush type shutter of 18mm thickness both side plain consisting of panel of WPC profile of 18mm (+ 0.7mm) thick of denisity 580 kg per cum manufactured by ISO-9000 certified company using for shutter cillicia ply 18mm thick and fixed with frame. The thickness of shutter is edges painted by matching colour of WPC lining of plain/prelim coloured WPC sheet using incl demoliation of old board any type etc complete as per manufacture specification.

Supply and fix magnetic catcher and striking plate including letting in and fixed complete all as specified and directed.

Supply and fix Continious (PIANO) hinges, mild steel, bright finish or electrogalvanised. 30 mm width of flaps (when open) complete all as specified as directed.

Material and labour Stainless steel Grade-304 framed work as in grill, grating etc with end of bars shouldered and /or riveted or tonged into spikes, frame guard bars, ladders, frame balusters, walk ways, railing and similar works confirming to relevant IS codes complete as specified and directed.

Material and labour salt glazed stone ware (SGSW) drain pipe of internal dia 150 mm laid in trenches and jointed in CM 1:1 grade 'A' complete all as specified and directed

Material and labour cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) to bed of drain pipes including packing under and haunching against the sides of pipes, after they are laid and tested for 150mm bore pipe complete all as specified and directed

Material and labour for cutting into existing manholes for connecting new drain, making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 (using 20mm graded complete) smooth finished and reforming benching as required complete (internal dia of pipe 150mm) complete all as specified and directed.

Material and labour PCC 1:3:6 Type C1 using 40mm graded stone aggregate as in surface channel drain, etc complete all as specified and directed.

Material and labour PCC 1:3:6 type C-2 using 40 mm graded stone agg as in sub base complete all as specified and as directed.

Extra forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement including form, moulds, mitred,stopped ends etc complete all as specified and directed.

Material and labour 65-70mm thick Pre-Cast Factory made RCC M-30 as in Cover Slab in different size of Manholes, Septic Tanks or Similar Articles with Plain Faces, all round 1mm thick plain sheet on the edge painted with bituminous paint on external surface and RCC cover should be engraved CA No and MES and set in Cement Mortar 1:4, including dismantling of existing cover complete all as specified and as directed. NOTE : Reinforcement shall be Measured and Paid for separately under relevant Item(s).

Supply and fix Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding/ridge to wall, fixed with self tapping screws complete all as specified and directed.

Material and labour for preparation of new untreated steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer. complete all as specified and directed

Material and labour PCC 1:2:4 type C-1 using 20 mm graded stone aggregate as in mud stops,top of fencing foundation, rounded or chamfered on edges complete all as specified and directed.

Material and labour for machine pressed precast concrete interlocking paver blocks of any shape and size confirming to IS 15658-2006 of 100 mm thickness M-40 grade with grey cement and pigment complete all as specified and directed.

Material and labour for 25 mm thick sand filling under floors or in foundations including watering and consolidation complete all as specified directed.

Supply and fix 8 mm Plates (plain or chequred channels, squares cut or notched (ordinary and counter sunk forming holes, without any attachment complete all as specified and directed

Taking down carefully copper /aluminium point wiring (light, fan , socket or power) complete, fittings such as switches, ceiling roses, pendants, regulators sockets light fitting etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls/floors and reuse the serviceable fittings under respective items complete all as specified and directed

Material and labour point wiring with 1.5 sqmm copper conductor cable (multistrand) PVC insulated FRLS (unsheathed), concealed type, drawing in and including PVC conduit 25 mm dia, having wall thickness not less than 2mm for one light/ fan point or one bell/buzzer, controlled by one switch, including 1.5 sqmm PVC insulated copper conductor continuous earth wire,incl suitable modular white cover plate with frame and modular flush box complete all as specified and directed

All as per Item No. 152 mentioned here in before but one three pin 5 Amps socket out let on the same board complete all as specified and directed

All as per Item No. 152 mentioned here in before but one three pin 5 Amps socket out let on the independent board complete all as specified and directed

All as per ser item 152 but for 3 pin 15/16Amp socket outlet independent with PVC unsheathed, multistrand copper conductor of 2.5 Sqmm and continuous PVC insulated and unsheathed 2.5 Sqmm copper conductor cable multistrand as earth wire complete all as specified and directed.

Supply and fix Modular switch single pole, one way, 6 Amps, 1 module, complete all as specified and as directed.

Supply and fix Modular switch single pole, one way, 16 Amps, 1 module, complete all as specified and as directed.

Supply and fix Ceiling rose 3 terminal PVC/polycarbonate, isolated body fixed on PVC round block, complete all as specified and as directed.

Supply and fix Modular step type fan regulator, 120W , 2 module, complete all as specified and directed

Supply and fix Sheet metal enclosures for TPN DB's (double door), IP-43 IK-09 protection suitable for TPN MCB as incomer and TPN/SPN MCB as out going 415 volts, 4 way including suitable size of copper bus bar with neutral link, fixed flush in wall, complete all as specified and as directed. (Note: MCBs shall be measured and paid for seperately)

Supply and fix MCB, single pole, 6 to 32 Amp, `C' series, 10KA, 240 Volt, complete all as specified and directed

Material and labour MCB, Triple pole and neutral, 40 to 100 Amp, `C' series, 10KA, 415 Volt, complete all as specified and directed

Material and labour MCCB, Four pole, 160 Amp, 36 KA rupturing capacity, IP-54 protection, thermal magnetic release adjustable type, 415 Volt, complete all as specified and directed

Supply and fix Vertical TPN DBs with , double door with IP-43 protection suitable for TP/FP MCCB 160 Amps as incomer and TPN/SPN MCB as outgoing 415 volts 4-way without MCCB & MCBs, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed by Engr in Charge . (Note:- MCCBs/ MCBs will be measured and paid for separetely.)

Material and labour for Sheet metal enclosure single pole and neutral earth enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps, 240 volts, complete all as specified and directed

Supply and fix Ceiling fan of 1200mm sweep, 5 star rated ( as per BEE recommendations), suitable to work on single phase, AC 230 volts, 50 hz supply complete with and including down rod , PVC insulated and overall sheathed 3 core flexible copper conductor cable of size 23/0.0076 size from ceiling rose to ceiling fan and testing complete all as specified and directed.

Supply and fix 35 Watt, Security light luminaries comprising of Die cast aluminium housing with weather proof gasket of lamp and driver compartment with 120 degree view angle, lumen output > 100 Lum/ watt, lumen maintenance> 70 % at 50000 hrs, color temp 5000-6500K, CRI > 70, THD < 15%, PF > 0.95 and LM 80 test compliance. The driver must be integrated APFC with short circuit protection, reverse polarity protection against 5KV high surges and comply with IEC 60598-1, IEC-61000-3-2, IEC 61547. The luminaire must have secondary optics with perfectly matched lens for better light control with and including brackets made of GI pipe of suitable dia light grade, bend to shape at an angle of 65 degree not less than 1.2mtr long with 2 Nos. of M.S clamp fabricated out of MS flat of size 50 x 6 mm on pole, including nuts, bolts, washers etc and making electrical connections with twin core twisted copper conductor flexible copper wire of suitable size from street light to junction complete all as specified and directed

Supply and fix Submain wiring with 2 x 4 sqmm single core PVC insulated unsheathed FRLS flexible copper conductor cable and 1 x 4 Sqmm single core PVC insulated unsheathed (FRLS) flexible copper conductor cable of size 4 Sqmm as earth lead in and including concealed PVC conduit , ISI marked and making good the disturbed surface complete all as specified and as directed. (Note : Two runs of 4 Sqmm cable, one run of 4.0 Sqmm earth wire and PVC conduit all one RM length each shall be measured as one unit of one Running Metre.)

Supply and fix Submain wiring with 2 x 10 sqmm single core PVC insulated unsheathed FRLS flexible copper conductor cable and 1 x 10 Sqmm single core PVC insulated unsheathed (FRLS) flexible copper conductor cable of size 10 Sqmm as earth lead in and including concealed PVC conduit , ISI marked and making good the disturbed surface complete all as specified and as directed. (Note : Two runs of 10 Sqmm cable, one run of 10 Sqmm earth wire and PVC conduit all one RM length each shall be measured as one unit of one Running Metre.)

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and directed

Supply and fix Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed.

Supply and fix LED bulb, B22 base, 9/10 watt, lumen output> 90Lum/W, CRI> 70, 5700-6500K Color temp, PF>0.9, THD< 20% suitable for lamp holder complete all as specified and directed

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. complete all as specified and directed.

Supply and fix decorative wall mounting made out of polycarbonated suitable for and incl retrofit 9 watt LED bulb complete all as specified and directed

Material and labour Earthing complete with galvanized steel earth plate electrode 600x600x6mm burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of earth plate not less than 1.5m below normal ground level connected with galvanized iron earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel complete with 15mm dia GI light grade protection pipe, 20mm dia GI medium grade watering pipe with funnel including charcoal, dust, salt, PCC M-15 type B1 in pit with angle iron (25x25x3)mm frame work with precast RCC 1:2:4 type B-1 cover reinforced with 8mm dia TMT bars @ 150mm C/C both ways and 12mm dia MS fabricated handle, test point etc. in and including light grade GI protection pipe 15mm bore up to 5m length for drawing in earth lead wire, all as shown in electric plate No. 3 of SSR Part-I complete with necessary earth work in any type of soil, removal to a distance not exc. 50m, testing on completion complete all as specified & directed .

M/S C S AITHANI (BID ID -3086689)