SPL REPAIR TO WATCH TOWERS AND REST ROOM AT AFS BHOWALI

Amount

Taking up or down 15 mm steel tubing and connections including clearing for refixing or removal to store complete all as specified and directed.

S &F 20 mm 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and directed.

M & L for cutting chases, pining in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings steps, cills, sunshades, shelves, lintels etc, and cutting chases for concealed conduit wiring, etc and making good, cuting n exc 10cm girth in brick walls complete all as specified and directed.

M&L non skid ceramic tiles 7-8mm thick coloured (Square/rectangular) area of each tiles exceeding 0.18 sqm but n exc 0.36 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed.

M&L non skid ceramic tiles 7-8mm thick coloured (Square/rectangular) area of each tiles exceeding 0.11 sqm but n exc 0.18 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Dismantling of floor hearth or wall tiling incl cement mortar bedding (but not backing) removing serviceable tiles to store & rubbish of the premises complete all as specified and directed.

S&F Glazed ceramic tiles coloured in vertical surface 450X350X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M & L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 for backing of Dado/ Skirting, complete all as specified and directed.

M & L for screed bed or bedding layer of mortar 20 mm thick for laying floor finishes etc in Cement Mortar 1:6 complete all as specified and directed.

M & L for screed bed or bedding layer of mortar 15 mm thick for laying floor finishes etc in Cement Mortar 1:6 complete all as specified and directed.

Demolition of brickwork/stone boulders, masonary built in cement mortar incl all quoins, arches,pillars,etc. but excl ashlar facings, dressed stone works & precast concrete surfaces complete all as specified and directed.

M&L brick work with sub class 'B' bricks old size best quality bricks straight or curved on plan exc 6 M mean radius built in CM (1:4) all as specified and directed.

S&F in repair vitreous china squitting pan Orrisa Pattern size 580x440 mm white with integral foot rest complete all as spd incluidng lime concrete bedding complete all as specified and directed. .

S&F in repair Bib taps 15mm dia cast copper alloy chromium plated fancy type, screwed down for iron pipe or for brass ferrule fixed in repair.complete all as spd & directed

S&F in repair 15mm bore angle valve with wall flange , cast copper alloy, chromium plated fancy type screwed for 15 mm iron pipe, complete all as specified.

S & F in repair PVC flushing cistern 10 ltrs capacity valve less symphonic action type low level complete with inlet valve handles incl brackets, chromium plate brass flush pipe 32 mm dia PVC connection and incl taking down old high level cistern comp all as spd .complete all as specified and directed.

S&F PVC connection 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed.

Taking down down cement plaster on brick or stone wall etc incl racking out joints hacking for key, scrubbing down with water etc complete all as specified and directed..

M&L for 15 mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces finished fair and even complete all as specified and as directed by the Engineer-in-Charge.

M&L for preparation of newly plastered surfaces and applying two coats of 100% Premium acrylic emulsion paint in camouflaging pattern (sigma MK-III pattern) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and icluding priming coat of exterior primer applied @ 0.90 litre/ 10 Sqm over new prepared surface complete all as specified including necessary scaffolding arrangement and as directed by Engr-in-Charge.

M&L for complete removal of existing treatment from surfaces of RCC/stone/concrete/brick walls of any description including preparation of scraped surface and applying two coats of 100% Premium acrylic emulsion paint in camouflaging pattern (sigma MK-III pattern) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and icluding priming coat of exterior primer applied @ 0.90 litre/ 10 Sqm over new prepared surface complete all as specified including necessary scaffolding arrangement and as directed by Engr-in-Charge.

M&L rendering 10mm thick in CM (1:6) on fair faces of brick work or concrete surfaces to be finished even and smooth (without using extra lime or cement, complete all as specified and directed.

Complete removal of existing treatment on surface of wall and applying 2 coats of oil bound distamper emulsion including a coat of alkali resistant primer over 3 mm thick wall care putty, complete all as specified and directed.

M&L for preparing newly plastered surfaces of walls and applying 2 coats of oil bound distemper emulsion including a coat of alkali resistant primer over 3mm thick wall care putty, complete all as specified and directed.

M&L for rendering 5 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:3 and finished smooth and even in ceiling without using extra cement complete all as specified and directed..

M&L for preparing newly plastered surfaces of ceilings and applying three coats of white wash complete all as specified and directed.

M&L for preparing old plastered surfaces of ceilings and applying two coats of white wash incl complete removal of old plastered surfaces complete all as specified and directed..

S & F in repairs 25 mm dia, stainless steel curtain rods including brackets and latto complete all as specified and as directed by Engineer-in charge.

Taking down chowkat or frames with shutters without taking off shutters from the frames) n exc 1.5 Sqm each complete all as specified and directed.

Taking down chowkat or frames with shutters without taking off shutters from the frames) exc 1.5 Sqm and n exc 4Sqm each complete all as specified and directed.

Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories Area not exceeding 2.00 sqm each (Note:The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.)

S&F of 3.0 mm thick sheet glass ,ordinary quality and size n.exc 0.50 Sqm and fixed to door/window shutter and partition wall by means of glazing clips rubber strips etc complete all as specified and directed.

M&L Chequred cement concrete tiles 20cmx20cmx 25mm thick set jointed and pointed in neat cement slurry in floors with grey cement and pigment, complete all as specified and directed.

Demolition of cement concrete (unreinforced) not exceeding 15 cm thickness including floor finishes any type (below or above ground level) complete all as specified and directed.

M & L for providing 75 mm thick cement concrete type-C-2 1:3:6 (using 40 mm grade stone aggregate) as in plinth protection or similar wk complete all as specified and directed.

S &F for 3 mm thick and 38 mm wide glass dividing strips fixed as in floor etc complete all as specified & directed.

M&L machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M & L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and directed.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc.laid, bedded and pointed in any mortar complete all as specified and directed..

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for RCC (Nominal Mix) type B1, 1:2:4, using (20 mm graded stone agg) for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed.

Use & waste of formwork to sides and soffits of lintels, cantilevers, shelves including supports for rough finished flat surfaces of concrete complete all as specified and directed..

M & L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints of IInd class hardwood complete all as specified.

M&L for 40 mm thick Flush shutters, solid core construction, with partical board core and plywood face panels, commercial type on both face is covered with decorative face veneer with lipping/frame to match complete all as specified and directed.

S&F 100 mm long Butt hinges, extruded brass, with mild steel hinge pin, bright polished and fixed, type B-11, complete all as specified and directed.

S & F 200 mm long Aluminium, anodised, barrel tower bolts of extruded section, complete all as specified and directed.

S & F of 150mm Extruded aluminium alloy handles, fabricated type, anodised, complete all as specified and directed.

S & F of 300 mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

M & L for preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise descri-bed, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with screws all complete all as specified and directed.

S&F Providing Kitchen/cupboard cabinet with shutter complete in required sizes made out of 18 mm thick one side decorative lamination & other side white balancing lamination sheet consisting of carcass 18 mm thick PVC sheet & provision of shutters and panels made out of 18 mm thick one side decorative laminated PVC sheet all brackets 5.5 mm screws etc. All the edges shall be covered with 2 mm thick PVC edge bonding tape of 90 degree edge bend finish as per make and specification mentioned as per drawing and specification approved by Engineer-in-Charge complete all as specified.

All same as per Sl No. 52 here-in-above, but both sides white lamination complete all as specified and directed.

S&F stainless steel L hinges complete all as specified and directed..

S&F stainless steel handles 100 mm long fabricated type, bright polished decorative type fixed with brass screws complete all as specified and directed.

S&F magnetic catcher complete all as specified and directed.

S&F in rapir Vitreous China, wash basin white, flat back , size 550mmx400 including brackets of any size, including cutting for and pinning in ends of brackets or erecting stand including fixing and supply of waste pipe of 32 mm dia, waste coupling of chromium plated brass. complete all as specified and as directed by Engineer-in-charge.

S & F in repairs 15 mm bore single lever brass basin mixer, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.(Make : Cera, Cat No : F2008461)

S & F 15 mm Brass,Chromium plated over head shower 70 mm(2.5") dia with evolving joint and sower arm(suitable for dew range) including fixing to steel pipe or union complete all as specified and directed.

S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and directed.

S & F in repairs CP brass Soap dish, fixed to walls with chromium plated (CP) brass screws complete all as specified and driected. (Make : Cera, Cat No : F5006106)

S & F in repairs 15 mm Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed all as specified and directed

M&L for 75mm dia PVC floor trap, with grating including jointing with solvent cement complete all as directed and specified

S&F for 75mm bore PVC [SWR] pipes single socketed, in any length with rubber ring joints, fixed to wall all as specified.

S & F in repair Hat pegs, Aluminium solid body, 125mm to 175 mm complete all as specified & directed

S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F 100 mm long Butt hinges, extruded brass, with mild steel hinge pin, bright polished and fixed, type B-11, complete all as specified and directed.

S & F of 150mm Extruded aluminium alloy handles, fabricated type, anodised, complete all as specified and directed.

S & F 300mm aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

Taking down carefully to existing copper/Aluminum point wiring (light,fan, socket or power) complete including fittings such as switches, ceiling roses, pendents, regulators sockets, light fitting etc removiing materials to keeping in safe custody for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc. complete all as specified and directed.

Taking down carefully by unscrewing from boards/outlet boxes, fittings and fixtures such as switches,sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and regulators, etc. for reuse at site or carrying to the store (To be measured only when found serviceable in all respects complete for reuse) etc complete all as specified and directed.

Taking down un-serviceable DB of any size and capacity including MCB etc, and removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls,floors, etc, and making good the disturbed surfaces on wall/floor etc complete all as specified and directed.

Taking down unserviceable sub main wiring with copper/aluminium conductor,PVC insulated,unsheathed cable of any size drawn through and including rigid PVC or PVC casing coping including earth wire complete all as specified and directed.

M&L for point wiring complete with 1.5 Sqmm FRLS PVC Insulated unsheathed copper conductor single core multi stranded flexible cable and 1.5 sqmm FRLS PVC insulated unsheathed copper conductor single core cable (green colour) as earth lead in and including concealed non metalic rigid PVC conduit medium grade minimum grade minimum 20mm dia (ISI mark) and conduit accessories concealed in walls/floors /ceilings/roofs etc, with sunken type pressed steel /welded mild steel boxes of required size made out of 16 gauge mikd steel sheet with hold fasts, 3mm thick laminated sheet cover for mounting of switches, socket outlets, regulators etc, complete all specified and directed for the collowings :-

(a) One light point/fan/exhaust fan controlled by one , one way switch, SP, 6 Amps

(b) One 3 pin socket outlet, 6 Amps on independent board

(c) One 3 pin socket outlet 06 Amps on same board

(d) One light point controlled by two 2 - way switches

M & L for pointing wiring with 4 Sqmm (nominal area) PVC insulated, unsheathed, multistrand, 1100 volts grade copper conductor cable single core, drawn through with and including non metallic PVC conduit and its accessories including one run of 4 Sqmm PVC insulated copper conductor cable green in colour for continuous earthing, 1.6 mm thick MS terminal box finished to wall with 3 mm thick laminated hylam sheet top cover all as specified for :-

Supply and fix switch piano flush type 5/6 amps single pole one way etc, completed all as specified and directed.

supply and fixing socket outlet 6 amps flush type 2/3 pin combined compete all as specified and directed

Supply and fixing socket outlet 16 amps flush 2/3 pin combined completed all as specified and directed

Supply and fixing switch, piano flush 16 Amps single pole one way completed all as specified and directed

Supply and fix switch piano flush type 5/6 amps single pole 2- way etc, completed all as specified and directed.

Supply and fixing ceiling fans against BER complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed.

Supply and fixing ceiling rose surface Bakelite 65x25 mm two to three terminals completed all as specified and directed

Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings ompleted all as specified and directed

Supply andn fixing LED Tube light fitting 1x20watt 220V, AC decorative box type with driver, holder including LED tube light connecting with three core flexibnle copper conductor cable of suitable size complete all as specified and directed

Supply and fixing LED tube light fitting mirror type with high output diffusor 2 feet 1x10 watt 220V, AC decorative type with driver, holder including LED tube lamp connecting with three core flexibnle copper conductor cable of suitable size complete all as specified and directed

Supply and fixing LED Street light fitting 35 Watt 230V AC outdoor type with high pressure die cast aluminium housing and heat resistent complete driver, lamp bracket with impact and corrosion resistant including thermal management optics complete with including GI brackets made out of 40mm bore GI pipe light grade 1.5 Mtr long bend to shape and fixed to the pole.wall with necessary MS clamp made out of 50x5mm flat end nut bolt and washer incl provn two single core PVC un sheathed cable of suitable length 1.50 Sqmm copper conductor cable and caonnection completed all as specified and directed

S&F DB 8 way double door flush mounting to the wall and making good the distrubed surfaces including connecting cable to the SPN/MCB using the dolly and the wires in the DB which should be properly tied according to the colour code completed all as specified and directed

S&F DB 4 way double door flush mounting to the wall and making good the distrubed surfaces including connecting cable to the SPN/MCB using the dolly and the wires in the DB which should be properly tied according to the colour code completed all as specified and directed

S&F MCB SPN up to 32 Amps, 240 volts with connection testing and commissioning completed all as specified and directed

S&F MCB SP 6 to 32 Amps, 240 volts with connection testing and commissioning completed all as specified and directed

S&F of sheet metal enclosure with two pin and earth plug and socket with metal top 230V with one single pole MCB of 20 Amp complete all as Specified and directed. Make - SSK or equivalent Havells/ABB/Legrand

M&L for sub main wiring with two single core PVC insulated unsheathed stranded copper conductor and earth wire 1100 volt grade drawn in and including electrical grade PVC concealed conduit & accessories of size 1.5 sq.mm with earth wire of 1.5 sq.mm. NOTE-Two run of 1.5 sq.mm & one run of 1.5 sq.mm & one run of PVC concealed conduit with accessories shall be measured as One length complete all as specified and as directed.

M&L for sub main wiring with two single core PVC insulated unsheathed stranded copper conductor and earth wire 1100 volt grade drawn in and including electrical grade PVC concealed conduit & accessories of size 4.0 sq.mm with earth wire of 4 sq.mm. NOTE-Two run of 4 sq.mm & one run of 4 sq.mm & one run of PVC concealed conduit with accessories shall be measured as One length complete all as specified and as directed.

Earthing complete with galvanised steel earth plate electrode 600X600X6 mm thick buried directly in ground preferably vertically in ground with top edge not less than 1.25 mtr deep below normal ground level connected with and including galvanised iron wire 4 mm dia as earthing lead by means of nuts bolts and washers of galvanized iron protected by 15mm dia (medium grade) GI tubing, funnel, wire mesh, 20mm bore GI tubing (light grade) watering pipe , including concrete pit in PCC (1:3:6) type C-1, precast RCC (1:2:4) type B-1 cover slab of size 350x350x50mm reinforced with 8mm dia TMT bars @ 15cm c/c in both ways and 10mm dia MS handle (01 No) of suitable size, charcoal and salt in alternate layers necessary excavation and earth work in soft/loose soil all as shown in Electric plate No. 3 of SSR part-I and testing on completion complete all as specified and as directed.

Ramsons

Jain construction co