IMPROVEMENT OF LIVING IN BILLETS AT AFS JODHPUR UNDER GE (AF) NO 2 JODHPUR

Demolition of any old unserviceable roof treatment of any description including roof tiles/ padding etc.to expose the RCC Slab of roof, cleaning,washing & rubbing complete all as specified and directed by Engineer-in-Charge.

Material & labour for applying brushing neat cement slurry with 3.0kg of cement per sq. metre complete all as specified and directed by Engineer-in-Charge.

Material & labour for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in roof padding (average thikness 50mm thick) complete all as specified and directed by Engineer-in-Charge.

Material & labour for 10 mm thick screed bed with CM 1:3 with water proofing compound @ 3% by weight of cement finish even and smooth surfaces using without extra cement applied on padding concrete when concrete is stilll green complete all as specified and directed by Engineer-in-Charge. Note:- Water proofing compound shall be measured and paid seperately

Supply only integral water proofing compound ISI marked complete all as specified and directed by Engineer-in-Charge.

Material & labour for prepration of surface and providing Waterproofing membrane moisture cured, polyurethane elastomeric liquid membrane waterproofing coating cold applied with brush/roller, with an elongation of >500% and tensile strength of 2 MPa as per ASTM D 412, 90 % Solid Content, shore A Hardness of min 50 as per ASTM D 2240, The system includes final base preparation as per note given below, PU primer application at 8Sqm/L and applying PU chemical in two coats at 1.8 kg per Sqm providing 1.5 mm DFT, complete as per Manufacturer specifications, Waterproofing membrane to be terminated on parapet wall in a V groove of size 25 mm x 25 mm atleast 300 mm above FFL which should be sealed with Polymer Mortar for work in building/structure of any height, completed as per manufacturer instruction complete all as specified and directed by Engineer-in-Charge. Note: Surface Preparation: (i) The surface to be treated should be sound and free from all types of dirt, dust and debris. Clean surface by brushing, scraping or chipping to eliminate all defective materials and foreign matter. Proper surface preparation needs dry mechanical grinding to expose base Substrate. Making of angle fillets(75mmx75mm all around the periphery of the wall with polymer modified mortar using SBR Latex ii) All construction joints and cracks > 1mm shall be treated by cutting V groove and filling with polymer modified SBR Latex and reinforced with geotextile membrane dipped in PU liquid Membrane before the 1st coat application. (Non Accessible roofs)

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.5 sqm but not exc 4 sqm each complete all as specified and directed by Engineer-in-Charge.

Supply & fix pressed steel frames for doors with one or more rebates including necessary fixing lugs hinges lock strike plate etc for 125 X60 mm complete & fixing also as specified supplied and fixed and complete all as specified and directed by Engineer-in-Charge.

Material & labour for cement concrete type C1 1:3:6 (using 20 mm graded stone aggregate) for filling the chowkat etc complete all as specified and directed by Engineer-in-Charge.

Supply & fix framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed by Engineer-in-Charge.

Supply & fix 30 mm thick flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides as per manufacturing instructions complete as specified by the manufacturer and complete all as specified and directed by Engineer-in-Charge.

Supply & fix 35 mm thick factory made , second class hard wood and skeleton shutters open rebated and prepared to receive glass gauze etc (without sash bars ) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part-I section 8 clause 8.24 (a) supplied and fitted to chowkats complete all as specified and directed by Engineer-in-Charge.

Material & labour for preparation of new steel surfaces of any description, over 10 cm in width or girth, not otherwise described priming with red oxide and applying two coats of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

Material & labour for preparation of new wooden surfaces of any description, over 10 cm in width or girth, not otherwise described priming coat with pink primer and applying two coats of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exceeding 1.5 sqm each or complete all as specified and directed by Engineer-in-Charge. by Engineer-in-Charge..

Supply & fix solid PVC door frame of size 50mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube, complete all as specified and directed by Engineer-in-Charge.

Supply & fix factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, and fixing in the frame at site as per specification & drawing complete all as specified and directed by Engineer-in-Charge.

Supply & fix 200 mm long aluminium, anodized, barrel tower bolts of extruded section and fixed complete all as specified and directed by Engineer-in-Charge.

Supply & fix 300 mm long aluminium alloy anodized sliding door bolt with hasp staple (bolt type ) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed by Engineer-in-Charge.

Supply & fix 100 mm long butt hinges, medium weight stainless steel complete all as specified and directed by Engineer-in-Charge.

Supply & fix aluminium handles, cast type, anodized, of size 150mm complete all as specified and directed by Engineer-in-Charge.

Supply & fix factory made steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed by Engineer-in-Charge.

Supply & fix factory made Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed by Engineer-in-Charge.

Supply & fix sheet glass 3 mm thick, ordinary quality and glazing with oil putty or wooden beads supplied with shutters in square n.exc. 0.5 sqm in each pane complete all as specified and directed by Engineer-in-Charge.

Supply & fix aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of apreture 1.4 mm & fixed with stainless steel wire staples fixed complete all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc. 15 cm thickness (below or above ground level)including kota stone flooring complete all as specified and directed by Engineer-in-Charge. Note : Debris should be removed out from defence premises.

Material & labour for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in sub base of kota stone flooring (average thikness 50mm thick) complete all as specified and directed by Engineer-in-Charge.

Material & labour for machine cut kota stone slab flooring 20 -25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 15 mm screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge.

Material & labour for kota-stone slab 15 mm thick in riser of steps skirting dado skirting and risers to step set & jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in CM 1:4 on stone masonry surfaces complete all as specified and directed by Engineer-in-Charge.

Material & labour for mirror polishing on marble/ granite/ kota stone/ stone work where ever required finish including old and new floor complete all as specified and directed by Engineer-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing from site and rubbish off the premises complete all as specified and directed by Engineer-in-Charge. Note : Debris should be removed out from defence premises.

Material & labour for non skid ceramic tiles, coloured, 7 to 8 mm thick in floors etc. (square/rectangular) area of each tile exc. 0.06 sqm but n. exc. 0.11 sqm, set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed by Engineer-in-Charge.

Material & labour for glazed ceramic tiles, coloured, 450x350x7mm thick on vertical surfaces such as skirtings, dados and risers to steps etc, set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 on stone masonry surfaces complete all as specified and directed by Engineer-in-Charge.

Material & labour for 25 mm thick PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in floor complete all as specified and directed by Engineer-in-Charge.

Disconnecting existing tanks of any description exc. 250 ltrs but n.exc. 500 ltrs capacity and removing from site complete all as specified and directed by Engineer-in-Charge.

Disconnecting existing tanks of any description exc. 500 ltrs but n.exc. 1000 ltrs capacity and removing from site complete all as specified and directed by Engineer-in-Charge.

Supply & fix 500 litres capacity rotational moulded polyethylene water storage tanks white with three layers (cylindrical vertical with closed top), hoisted and fixed in position all as specified in SSR Part-I, connecting up pipes including 20 mm bore plastic ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic plastic ball screwed for iron pipe and fixed. (Minimum weight of ball valve - 210 gms) complete all as specified and directed by Engineer-in-Charge.

Supply & fix 1000 litres capacity rotational moulded polyethylene water storage tanks white with three layers (cylindrical vertical with closed top), hoisted and fixed in position all as specified in SSR Part-I, connecting up pipes including 20 mm bore ball brass valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic plastic ball screwed for iron pipe and fixed. (Minimum weight of ball valve - 210 gms) complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repairs 20 mm dia gun metal, globe or gate valve, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed by Engineer-in-Charge. .

Supply & fix in repairs 25 mm dia gun metal, globe or gate valve, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed by Engineer-in-Charge. .

Taking up or down steel tubing 15mm bore and connections including cleaning for refixing or removing from site complete all as specified and directed by Engineer-in-Charge. .

Taking up or down steel tubing 20mm bore and connections including cleaning for refixing or removing from site complete all as specified and directed by Engineer-in-Charge. .

Taking up or down steel tubing 25mm bore and connections including cleaning for refixing or removing from site complete all as specified and directed by Engineer-in-Charge. .

Supply and laying 15mm bore tubes, galvainzed steel, medium grade, with all fittings and fixed complete on walls and ceilings or laid in floors complete all as specified and directed by Engineer-in-Charge.

Supply and laying 20mm bore tubes, galvainzed steel, medium grade, with all fittings and fixed complete on walls and ceilings or laid in floors complete all as specified and directed by Engineer-in-Charge.

Supply and laying 25mm bore tubes, galvainzed steel, medium grade, with all fittings and fixed complete on walls and ceilings or laid in floors complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repairs 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 210 gms.) complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repairs 15 mm bore bib taps, cast copper alloy, chromium plated, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed by Engineer-in-Charge. .

Supply & fix in repairs 15mm bore pillar tap, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed by Engineer-in-Charge. .

Supply & fix in repairs, 15 mm bore stop valve, fancy type, chromium plated with long shank and cup , screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or for unions complete all as specified and directed by Engineer-in-Charge. .

Supply & fix in repair brass chromium plated shower rose of 125 mm size with swivel joint including fixing to steel pipe or union complete all as specified and directed by Engineer-in-Charge. .

Supply & fix in repairs vitreous china wash basin, white, flat back, size 550x400mm including brackets, cutting for and pinning in ends of brackets or erecting stand, brass chromium plated perforated waste coupling/ fittings 32 mm dia with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed and PVC waste pipe of 32mm bore and of suitable length, complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repairs, EWC vitreous china wash down water closet pan , white, with and including plastic water closet seat, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device fixed complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repairs vitreous china squatting pan, ‘Orissa’ pattern, size 580 mm x 440 mm, white with integral foot rests, including PVC 'P' trap, embedded and set in PCC 1:5:10 type E-2 and making good to floor including removing rubbish complete all as specified and directed by Engineer-in-Charge. .

Supply & fix in repairs PVC valveless, syphonic action type, flushing cistern, low level, 10 litres capacity, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed by Engineer-in-Charge. .

Supply & fix in repairs 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement including jointing to waste pipe fixed in cement concrete type B1(1:2:4) complete all as specified and directed by Engineer-in-Charge. .

Supply & fix in repairs 75mm PVC (SWR) Nahani trap, plain with grating including jointing with solvent cement including jointing to waste pipe fixed in cement concrete type B1(1:2:4) complete all as specified and directed by Engineer-in-Charge. .

Supply & fix in repairs PVC(SWR) branch pieces, single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches for 75 mm bore pipe complete all as specified and directed by Engineer-in-Charge. .

Supply & fix in repairs PVC(SWR) branch pieces, single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches for 100 mm bore pipe complete all as specified and directed by Engineer-in-Charge. .

Supply & fix in repairs 75mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repairs 110mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repairs 75mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall including pvc stack clamp complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repairs 110mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall incuding pvc stack clamp complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repair PVC(SWR) Bend of 110mm radius complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repair PVC(SWR) Bend of 75mm radius complete all as specified and directed by Engineer-in-Charge.

Material & labour for in repair for vitreous china urinal flat back bowl type complete including including providing and fixing plug size 465X355X265 mm white (minimum) with grating and union for discharge pipe complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repairs PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed by Engineer-in-Charge..

Material & labour for taking down cement or cement lime plaster any description incl racking out joints, hacking for key , scrubbing down with water etc including removal of debrish from the MOD land complete all as specified and directed by Engineer-in-Charge.

Material & labour for rendering 15 mm thick in CM 1:4 on stone masonry surfaces finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

Material & labour for rendering 15 mm thick in CM 1:6 on stone masonry surfaces finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

Material & labour for preparation of new plastered surface of walls and applying two coats of cement base paint over a coat of primer, white or tinted by mechanical means using suitable tools and plants as per manufactures instructions. complete all as specified and directed by Engineer-in-Charge. Note:- Necessary formwork required will not paid seperatly.

Material & labour for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali-resiatant primer over 1-1.5 mm thick wall care putty on plastered surrfaces by mechanical means using suitable tools and plants as per manufactures instructions complete all as specified and directed by Engineer-in-Charge..

Material & labour for 75 mm thick PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in plinth protection finished surface even and fair without using extra cement all as specified and complete all as specified and directed by Engineer-in-Charge.

Material & labour for cement concrete type B-2 1:2:4 75mm thick complete all as specified and directed by Engineer-in-Charge.

Material & labour for powder coated anodised aluminium frame for doors, windows, louver type ventilators including rotating type fixing arrangement for fixing of louver glass joining cleat for fixing etc complete all as specified and directed by Engineer-in-Charge.

Supply & fix MS powder coated louvers with including arrangement of fixing glass pinhead as per size & louvers ventilators (Glass shall be measured separately ) complete all as specified and directed by Engineer-in-Charge.

Material & labour for providing and injecting chemical emulsion for post construction anti termite treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 ltr per sqm of the vertical surface of the sub structure to a depth of 300 mm including excavating channel along the wall and rodding etc complete all as specified and directed by Engineer-in-Charge.

Welding in repairs exc 2.5 cm & n exc 5 cm in length & thickness of metal n.exc 6 mm complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repair galvanised mild steel wire cloth, 0.56 nominal dia of wire and average width of aperature 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repair stainless steel curtain rod with and including fancy type SS fixing bracket, stop roller and end caps etc complete all as specified and directed by Engineer-in-Charge.

Material & labour for hacking out old broken glass (any thickness, size, quality or description) from metal frame glazed with putty including punching or drilling out old glazing pin/spring, clips and providing new ones complete all as specified and directed by Engineer-in-Charge.

Supply & fix sheet glass 3 mm thick, ordinary quality and glazing with oil putty or wooden beads supplied with shutters in square n.exc. 0.5 sqm in each pane complete all as specified and directed by Engineer-in-Charge.

Material & labour for complete removal of old treatment by mechanical means from walls and applying one coat of primer, 1-1.5mm thicck wall putty and sanding on plastered surfaces prepatatory to distempering and applying two coats of oil emulsion distemper white or tinted by pump roller applicator by mechanical means using suitable tools and plants as per manufactures instructions and complete all as specified and directed by Engineer-in-Charge.

Material & labour forcomplete removal of existing treatment of walls and applying two coats of cement base paint over a coat of primer, white or tinted,upto any height from ground level all as directed by pump roller applicator by mechanical means using suitable tools and plants as per manufactures instructions and complete all as specified and directed by Engineer-in-Charge. Note:- Necessary formwork required will not paid seperatly.

Demolition of stone masonary built in cement mortar of any description and in any position not otherwise specifically provided for complete all as specified and directed by Engineer-in-Charge.

Material & labour for walling of squared rubble, regular coursed, well bonded, bedded and solidly hearted, built in cement mortar1:6 complete all as specified and directed by Engineer-in-Charge.

Material & labour for PCC block masonary with solid blocks exc 10 cm in width 1:3:6 Type C1 20 mm graded aggregate and setting in cement moratr 1:6 complete and complete all as specified and directed by Engineer-in-Charge.

Material & labour for PCC type B-1(1:2:4) using 20mm graded crushed stone agg, in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed by Engineer-in-Charge.

Supply & fix precast RCC 1:2:4 manhole covers slabs any size, thickness with 3 mm thick FL around cover slab complete all as specified Make PPRC, polycrete including reinforcement as per manufacture design with frame complete all as specified and directed by Engineer-in-Charge.

Material & labour for SGSW drain pipe grade 'A' 100mm bore (internal) including laying in trenches and jointing in cement & sand morter 1:2 & testing including concrete bed to drain pipes of 100mm bore including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C2 using 40mm graded aggregate complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repair 3.15mm dia plain mild steel wire,galvanised class 3,and fixing to wood, concrete or steel posts and/or to straining bolts, including securing with and provision of galvanised iron tying wire, galvanised iron staples or steel pins, etc. as directed (each line of wire to be measured) incuding detached work such as for mosquito nets and fixing to straining bolts, hooks, eyes, etc.including resecuring and restaining including making good staples etc complete all as specified and directed by Engineer-in-Charge.

Supply & fix plain white 18mm thick UPVC (WPC) sheet/board of required size in cupboards and in similar works including brackets/bolts for fixing. The panels shall be fabricated using adhesive and screws where required .All the edges shall be covered with 2 mm thick edge bending tape or 90 degree edge bend finish as per make and specification including hook for support and all neceaasry support and SS fittings including handle, hasp and staple complete all as specified and directed by Engineer-in-Charge.

Material & labour for anti-termite treatment along external wall below concrete or plinth protection or masonry apron using chemical emulsion @ 2.25 litres per linear meter including drilling and plugging holes etc. In apron complete all as specified and directed by Engineer-in-Charge.

Material & labour for At points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and directed by Engineer-in-Charge.

Material & labour for preparation of old surface of ceilings and applying one coats of white washover and , complete all as specified and directed by Engineer-in-Charge. .

Supply & fix in repairs brass chromium plated tubular towel rail 20 mm dia D type 60 cm long between flanges complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repairs brass chromium plated health faucet of 15 mm bore complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repairs 300 mm long aluminium alloy anodized silding door bolt with hasp staple (bolt type ) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repairs aluminium handles, cast type, anodized, of size 100mm complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repairs 200 mm long aluminium, anodized, barrel tower bolts of extruded section and fixed complete all as specified and directed by Engineer-in-Charge. by Engineer-in-Charge..

Supply & fix in repairs plastic water closet seat coloured closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repairs sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repairs, 300mm , mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repairs, 140 mm length door stopper aluminum alloy body and tongue, anodized, with hard drawn steel spring, complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repairs, 18/19 mm thick prelaminated particle boards, exterior grade, prelaminated both sides with decorative choice laminations, fixed with screws to timber frame work complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repairs, 1000 to 1400 mm long and 20 mm wide door seal incl 10 mm wide cotton complete all as specified and directed by Engineer-in-Charge. .

Supply & fix in repairs, 32 mm bore PVC waste pipe for WHB/urinlas 1000mm long with union etc complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repairs, brass chromium plated spreader suitable for urinal complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repairs, brass chromium plated soap dish with CP brass screws complete all as specified and directed by Engineer-in-Charge.

Supply & fix F in repair for PVC cowl 100mm dia fixed complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repair for PVC cowl 75mm dia fixed complete all as specified and directed by Engineer-in-Charge.

Supply & fix framed work as in partition work, doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing on existing floor/wall completeconfirming Fe 290 Gde-165 complete all as specified and directed by Engineer-in-Charge. .

Supply & fix prelaminated particle board, interior grade 18/19 mm thick , prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber work or other place as builtup furniture and in partion work complete all as specified and directed by Engineer-in-Charge.,

Supply & fix plain fillets 2nd class hard wood of sectional area not exe 3 sq cm , square, rectangular or triangular in section, clean sawn, secured with mills or brads complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repair 40 mm dia cupboard knobs fixed with nuts, screw and washer of brass polished bright finished complete all as specified and directed by Engineer-in-Charge.

Supply & fix flush shutters,40 mm thick paticle board core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repairs MS sliding door bolt with hasp and staple (bolt type) of 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple and fixed size 300mm long complete all as specified and directed by Engineer-in-Charge.

Resecuring or easing & adjusting without taking down shutters of any description exc 1 sqm and n exc 2 sqm each complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repairs single mirror bath room cabinet moulded body and framed (made from strong and fine quality ABS plastic ) with hinged door of size 16 " x 12 " x 6 " white or ivory colour fixed on wall with appropriate rawl plugs complete all as specified and directed by Engineer-in-Charge.

Supplying and laying of CPVC pipes 16mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed by Engineer-in-Charge.

Supply and fix 16mm outer dia CPVC brass elbow complete all as specified and directed by Engineer-in-Charge.

Supply and fix 16mm outer dia CPVC UNION complete all as specified and directed by Engineer-in-Charge.

Supply and fix 16mm outer dia CPVC Male brass threaded adaptor (MTA/MBTA) complete all as specified and directed by Engineer-in-Charge.

Supply and fix 16mm outer dia CPVC Female brass threaded adaptor (FTA/MBTA) complete all as specified and directed by Engineer-in-Charge.

Cutting shrubs wild growth trees n exc 30 cm girth or removing complete vegetable growth weeds from roof / wall including taking out roots from roof/ brick wall and injecting chemical for stoping further growth and making good to disturbed surfaces with pcc 1.2.4 type b0(using 12.5mm graded crushed aggregates) & disposed the rubbish out of MOD land complete all as specified and directed by Engineer-in-Charge. .

Supply & fix in repairs 75 mm Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repairs 100 mm Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed by Engineer-in-Charge.

Material & labour for Green marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms, wash basin platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of marble over 15 mm thick Screed bed or bedding layer for laying floor finishes in CM 1:4 complete all as specified and directed by Engineer-in-Charge.

Material & labour for writing letter or figures (block, Roman, italic or indian) n exc. 30 cm high complete all as specified and directed by Engineer-in-Charge.

Material & labour for index hands(Natural size) or arrows (upto 40cm long) complete all as specified and directed by Engineer-in-Charge.

Material & labour for PCC 1:4:8 type D2 ( using 40 mm graded stone aggregate) as in sub base complete all as specified and directed by Engineer-in-Charge.

Material & labour for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade made in rubber mould/ruberised type with gray cement and pigment complete all as specified and directed by Engineer-in-Charge. .

Material & labour for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed by Engineer-in-Charge.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed by Engineer-in-Charge. .

Taking down carefully copper/aluminum point wiring (Light/ fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc, stacking at site for reuse or removing materials to store for keeping in for taking credit and making good the disturbed surfaces / walls/ floors etc complete all as specified and directed by Engineer-in-Charge. ,.

Material & labour for channel or grooves cutting upto a depth of 2.5 cm and width not exc 15cm into brick/concrete/stone masonary walls, with or without re-inforcement and trimming surface as required, including concealing PVC conduit 20/25mm dia with required accessories (like junction boxes/bends etc) and plastering in 1:4CM, applying two coats of approved quality white putty for making good with smooth finish to match with the existing specification of wall surface complete all as specified and directed by Engineer-in-Charge.

Material & labour for point wiring with 1.5 Sq. mm, multi-stranded copper conductor, single core, PVC insulated and unsheathed cable for phase and neutral, including 1.5 Sq. mm PVC insulated unsheathed multistranded copper conductor single core cable as earth continuity conductor (in green color) connected to common earth dolly, drawn in concealed conduit heavy duty (HMS Grade), GI terminal boxes not less than 1.0mm thick fixed flush to wall surface, covered with & including 3 mm thick plastic laminated sheet top cover or including modular plates of required size for mounting switch and sockets etc. complete all as specified and directed by Engineer-in-Charge. for following : - Note : Quoted rates deems to be included cost of modular plate for mounting switches, sockets & regulators as required at site.

One light point controlled by one switch one way.

One fan point controlled by one switch one way.

One 3 pin socket outlet 5 Amp on same board with other switches.

One 3 pin socket outlet 5 Amp on Independent board with other switches.

All same as per item ser No 140.00 here-in-above but wiring using 2.5 sqmm multi-stranded copper conductor, FRLSH, single core, PVC insulated and unsheathed cable, including 2.5 Sq. mm PVC insulated unsheathed multistranded copper conductor single core cable as earth continuity conductor (in green color) connected to common earth dolly for 6 pin, 15/16 Amps socket outlet on independant board complete all as specified and directed by Engineer-in-Charge. .

All same as per item ser No 140.00 here-in-above but wiring using 4.0 sqmm multi-stranded copper conductor, FRLSH,single core, PVC insulated and unsheathed cable, including 4.0 Sq. mm PVC insulated unsheathed multistranded copper conductor single core cable as earth continuity conductor (in green color) connected to common earth dolly for two pin earth metal clad plug & socket point for AC/Geysers complete all as specified and directed by Engineer-in-Charge. .

Supply & fix switch piano flush type single pole one way 5 Amps 230 volt complete all as specified and directed by Engineer-in-Charge. .

Supply & fix switch piano flush type single pole one way 15 Amps 230 volt complete all as specified and directed by Engineer-in-Charge. .

Supply & fix Socket outlet 2 in 1, 6 Amp 2/3 pin combined complete all as specified and directed by Engineer-in-Charge. .

Supply & fix Socket outlet 2 in 1, 3 pin , 5/15 Amp, flush type complete all as specified and directed by Engineer-in-Charge.

Supply & fix Stepped type electronic fan regulator, flush type 230V A complete all as specified and direceted by engineer-in- chargeC.

Supply & fix switch modular one way 6 Amps 230 volt, 1 module complete all as specified and direceted by engineer-in- charge.

Supply & fix switch modular one way 16 Amps 230 volt 1 module complete all as specified and direceted by engineer-in- charge.

Supply & fix Socket modular 6 Amp 2/3 pin combined two module complete all as specified and direceted by engineer-in- charge.

Supply & fix Socket modular 6&16 Amp 2/3 pin combined two module complete all as specified and direceted by engineer-in- charge.

Supply & fix Modular staped type fan regulator, 2 module complete all as specified and direceted by engineer-in- charge.

Supply & fix Ceiling rose surface bakelite 65x50mm three terminal complete all as specified and direceted by engineer-in- charge.

Taking down carefully ceiling fan/exhaust fan by disconnecting electrical connections, unsecrewing from position, dismantling blades, stacking carfully at site for reuse of serviceable fans complete all as specified and directed by Engineer-in-Charge.

Taking down carefully electric geyser by disconnecting electrical connections & water connections unsecrewing from position, stacking carfully at site for reuse of serviceable geyser complete all as specified and directed by Engineer-in-Charge.

Fixing only light fittings any type, connecting up with twin core PVC insulated and PVC sheathed flexible copper conductor cable of suitable size from ceiling rose complete all as specified and direceted by engineer-in- charge Note : Serviceable light fittings taken down against item No. 138.00 shall be used at site complete all as specified and directed by Engineer-in-Charge.

Supply and fixing LED light fitting wall /roof mounted, Aluminium housing, 1 x 20 watt including LED tube with driver complete suitable body robust, corrosion resistant, superior finish and without any cracks or through holes. The system wattage of fitting should not be more than 20 watt ± 10%, surge protection of minimum 2 kV power factor should be more than 0.90 cool white colour, total harmonic distoration (THD) should not be more than 15%, lumen output should not be less than 90 lumens per watt, total input voltage range 140-280 V AC, colour rendering index should not be less than 80, corelated colour should be minimum 6000 degree kelvin complete all as specified and directed by Engineer-in-Charge.

Supply and fixing LED light fitting wall /roof mounted, Aluminium housing, 1 x 9/10 watt including LED tube with driver complete suitable body robust, corrosion resistant, superior finish and without any cracks or through holes. The system wattage of fitting should not be more than 20 watt ± 10%, surge protection of minimum 2 kV power factor should be more than 0.90 cool white colour, total harmonic distoration (THD) should not be more than 15%, lumen output should not be less than 90 lumens per watt, total input voltage range 140-280 V AC, colour rendering index should not be less than 80, corelated colour should be minimum 6000 degree kelvin complete all as specified and directed by Engineer-in-Charge.

Supply & fix building security light fittings, with pressure die cast aluminium housing, suitable for 25 W LED, complete pre-wired, incl suitable bracket for fixing light on wall or any indicated locaction complete all as specified and direceted by engineer-in- charge

Supply & fix LED light fitting 1 x 10W bulkhead luminaires including inbuild LED light driver perfect interior and exterier application connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engineer-in-Charge.

Hanging only ceiling fans, 1200mm sweep, complete with three blade, down rod, accessories and making connection from ceiling rose or connector to fan using three core 0.75sqmm copper stranded conductor PVC insulated and PVC sheathed flexible wire complete all as specified and directed by Engineer-in-Charge.

Material and labour for rewinding of burnt Ceiling fan by opening covers of ceiling fan ,remove the burnt winding ,cleaning the slots and rewinding the fan with super enammeled copper wire of same wire gauge,warnishing after winding and including bearing and gun metal bush all complete all as specified and directed by Engineer-in-Charge.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200/1400 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and direceted by engineer-in- charge

Fixing only exhaust fan 300mm sweep, Steel/PVC body AC single phase 230V of size 300m using 4 Nos 10mm x 100mm long wall fasteners, nut and washers and connecting up using flexible three core 0.5sqmm copper stranded conductor PVC insulated and PVC sheathed flexible wire through PVC flexible conduit from ceiling rose/connector to fan complete all as specified and directed by Engineer-in-Charge. by Engineer-in-Charge.

Installation only Electric Storage type water heater (Geysers) 25/50 Ltr capacity with standard fixing accessories including suitable size wall fastener bolts & Nuts, gutties etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for sub main wiring as per IS, single core FRLS PVC insulated flexible multistranded copper conductor,FRLSH, 1.1 KV grade drawn through & including PVC grey conduit heavy duty with necessary accessories (like bend, juction boxes etc) including taking down old unsv submain wiring complete all as specified for Two runs of 6.0 Sq.mm main Phase-Neutral supply cable alongwith one run of single core 6.0 Sq.mm for continuous earth wire in green color.

Supply and replace sheet metal enclosures distribution board for 240 volts, 12 way horizontal type, double door, single pole and neutral with 200 Amps rated neutral copper bus bar for housing MCB and blank plates and fixed flush in wall surface, and tested on completion complete including taking out old unserviceable sheet metal enclosures complete all as specified and directed by Engineer-in-Charge.

Supply and replace sheet metal enclosures distribution board for 240 volts, 8 way horizontal type, double door, single pole and neutral with 200 Amps rated neutral copper bus bar for housing MCB and blank plates and fixed flush in wall surface, and tested on completion complete including taking out old unserviceable sheet metal enclosures complete all as specified and directed by Engineer-in-Charge.

Supply and replace sheet metal enclosures distribution board for 240 volts, 4 way horizontal type, double door, single pole and neutral with 200 Amps rated neutral copper bus bar for housing MCB and blank plates and fixed flush in wall surface, and tested on completion complete including taking out old unserviceable sheet metal enclosures complete all as specified and directed by Engineer-in-Charge.

Supply & fix MCB SPN/DP 40 to 63 Amps 240 volts, 10 kA rupturing capacity providing in DB complete including connection & testing all as specified.

Supply and fixing MCB single pole 6-32 Amps, 240 volts, 10 kA rupturing capacity providing in DB complete including connection & testing all as specified.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sqmm 2 core

Excavation in trenches in soft/loose soil n exc 1.5m wide and n.exc 1.5m in depth and getting out complete all as specified and directed by Engineer-in-Charge.

Removing excavated surplus soil to a distance n exc 50 m and depositing where directed at a level n exc 1.5 mtr above starting point complete all as specified and directed by Engineer-in-Charge.

Returning filling in including spreading leveling watering and well ramming in layers n.exc 25 cm complete all as specified and directed by Engineer-in-Charge.

Material and labour for sand cushining to underground cable, provided with a layer 8 cm before and 15cm after laying and stretching jointing and testing the cable complete all as specified and directed by Engineer-in-Charge.

Material & labour for stone slab 40 to 50 mm thick rough dessed jodhpur stone slab cover in trenches for protection of cable 25 to 30cm wide and not less than 50 cmm in length laid dry abutting each other with gap between adjacent slab not exceeding 10mm over sand cushioning complete all as specified and direceted by engineer-in- charge.

Material and labuor for earthing complete with Galvanized Steel earth plate electrode 600x600x6mm thick buried directly in ground (earth pit not less than 2.25 M deep below ground level) with top edge of the plate not less than 1.5 M below normal ground level and filled with 15cm thick alternate layers of charcoal and salt, connected & including GI wire earth lead 4.0mm dia by means of bolts, nuts, check nuts and washers made of galvanized iron protected by 15mm dia GI Pipe (light grade). Earth plate shall be surrounded by alternate layers of charcoal or coke and common salt in 15cm thick in layers & 15cm of widht all aurround of earth plate including 20mm dia GI light grade pipe for watering and including funnel, wire mesh, necessary earth work in any type of soil, Pre-cast RCC cover duly re inforced with 8mm dia TMT Bar @150 mm c/c both ways, one lifting handle made of 8 mm dia TMT bar embedded in cover slab, Earth Pit of PCC (1:3:6) type C2 (using 20mm graded crushed store aggrgate) complete all as specified and as shown in electrical plate No-3 of SSR Part-I including testing on completion complete all as specified and direceted by engineer-in- charge. Note:- (i) PCC chamber shall be constructed at least 1.5 metre away from the earth electrode and pipe for watering shall be provided in slanting manner. (ii) The unit rate includes earthing lead & protection pipe upto 7.5 metre from top of earth plate.