Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.9 LAccepted-AOC ABHAYNAGAR JAGATPUR PO ABHAYNAGAR AGARTALA WEST TRIPURA | AGARTALA | WEST TRIPURA | TRIPURA | L1 | Accepted-AOC Successful Bidder | |
| 2 | L2₹10.1 L+₹14,856.91 (1.49%)Rejected-Finance | L2 | Rejected-Finance Unsuccessful Bidder | |
| 3 | L3₹10.1 L+₹19,363.89 (1.95%)Rejected-Finance RONALDSAY ROAD JOYMAGAR BUS STAND AGARTALA WEST TRIPURA | AGARTALA | WEST TRIPURA | TRIPURA | L3 | Rejected-Finance Unsuccessful Bidder | |
| 4 | L4₹10.2 L+₹25,399.22 (2.56%)Rejected-Finance | L4 | Rejected-Finance Unsuccessful Bidder | |
| 5 | L5₹10.3 L+₹33,513.17 (3.37%)Rejected-Finance BHATI ABHOYNAGAR WEST VIVEKANANDA CLUB ROAD NEAR HOUSE OF DOCTOR GOURISHANKAR CHAKRABORTY P O AGARTALA TRIPURA WEST PIN 799001 | AGARTALA | WEST TRIPURA | TRIPURA | 799001 | L5 | Rejected-Finance Unsuccessful Bidder |
Tender Value
₹9.9 L
EMD Value
₹19,900
Closing Date
4 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE (I) AGARTALA
AGE (I) AGARTALA PIN 901184 C/O 99 APO
ADDN/ ALTN TO BLDG NO T-816 (BATHROOM) OF FASF AND PROVN OF 10 X 25 LTRS GEYSERS IN JCOs/OR BATHROM AND COOK HOUSE OF SATA BTY AT MIL STN AGARTALA
2023_MES_573436_1
8368/E8
Open Tender
Civil Works
Item Rate
180 days
AGARTALA
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
AGE (I) AGARTALA
₹19,900
Yes
9 Feb 2023
7 Jan 2023
6 Feb 2023
7 Jan 2023
4 Feb 2023
21 Jan 2023
Amount
Schedule'A' Part-I: B&R works
Taking down cement plaster on brick concrete surfaces including racking out joints hacking for key, scrubbing down with, water etc.
Demolition of brick work built in cement mortar.
Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.
Taking down chowkat with shutter/without taking off shutter from the frame n. exc 1.50 Sqm each
All as per item No 4 above but exe 1.50 sqm & n exe 4 sqm each
Surfce excavation n.exc 30cm deep and averaging 15cm deep and getting out in hard/dense soil.
Excavating post holes (or similer holes) each n.exc 0.5 cum getting out,returning filling n and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm watering and removing surplus soil to a distence n.exc 50m making gd surface f soft/loose soil surface all as specified and directed.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out soft/loose soil
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.
M&L for Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point soil
M&L for Hardcore broken stone of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface of boulders
M&L Cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete completed all as specified
Material and labour for brick work with locally available sub class ‘B’, old size, best quality bricks, straight or curved on plan exc 6 m mean radius built in cement mortar ( 1:6) all as specified and directed.
M&L TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clip
All as per item No 14 above, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders
M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) as rough finished surface.
M&L RCC work for 1:2:4 type B1(20mm grade aggregate) slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves.
M&L for Preparing new plastered surfaces on walls and applying two coats of cement based paint over a coat of primer complete all as specified and as directed
S&F Capacity 2000 Ltr Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I
S&F 20mm dia. Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed
S&F of 25mm float valve/Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed
S&F Steel ventilator with top hung shutter including hinges,steel peg stay complete all as directed.
S&F sheet glass of 3mm thick ordinary quality and glazing with oil putty in square n exc 0.5 sqm but in frosted.
M&L mild steelwork such as grills, guard bars etc and similar work conforming to Fe290 GDE E-165
Cutting bolls in to brick wall for inserting bold fast & making good dismantled portion in cm (1:3) or PCC (1:2:4) type B1, exe half brick but not exe 1 brick.
M&L for 2 coats of synthetic enamel paint over coat of red oxide zinc chrome on steel surfaces over 10cm width or girth including preparation of new surfaces.
M&L mild steel worksuch as hold fasts, hooks, clamps etc and similar work conforming to Fe 290. Gde-165
Roughening surfaces of old concrete floor by picking, sweeping clean & washing down with water to remove dust etc and brushing neat cement slurry at the rate of 3 kg per sqm
Dismantling floor, hearth or wall tiling including cement mortar bedding,(but not backing) removing serviceable tiles to store and rubbish off the premises.
M&L non skid ceramic coloured tiles 7 to 8mm thick (square /rectangular) area of each tile exceeding 0.06 sqm but not exc 0.11 sqm in floors, set & jointed in neat cement slurry & pointed with white/coloured cement to match over and including 15 mm thick screed bed in CM (1:6) complete all as specified and directed.
Material & Labour glazed ceramic coloured tiles 350 x 250 x 7 mm thick on skiriting/dado, set & jointed in neat cement slurry & pointed with white/coloured to match over and incl 10 mm thick rendering in CM (1:4) complete all as specified and directed.
M&L pre polished machine pressed chequred 300 mm x 300 mm x 22-25 mm thick tiles set jointed in neat cement slurry & pointed with coloured cement to match over and including screed bed with cement mortar (1:4) fixed as per manufacturer instruction.
M&L Rendering 15mm (cm 1:4) thick on fair faces of brick work or concrete surfaces with using extra cement
M&L 10 mm thick rendering in cm (1:6) on other than fair faces of brick work finished even & smooth without using extra cement.
M & L for preparation of new plastered surfaces by applying 3mm wall care putty and applying two coats of oil bound distemer over a coat of primer on new plastered surfaces .
M&L applying two coats of weather coat on old plastered surfaces of wall over a coat of primer after applying a thin layer of wall care putty including removal of existing treatment and preparation of old plastered surfaces to receive paint complete all as specified and directed by Engr-in-Charge.
M&L applying two coats of weather coat on new plastered surfaces of wall over a coat of primer after applying a thin layer of wall care putty preparation of new plastered surfaces to receive paint complete all as specified and directed by Engr-in-Charge.
Taking up or down 15mm bore steel water tubing & connections,including cleaning or refixing or removal to store.
All as per item No. 40 above but 20 mm bore -ditto-
S&F 20 mm bore medium grade galvanised steel water tubing with all fitting & fixed complete to walls or ceiling or laid in floors.
S&F 15 mm bore medium grade galvanised steel water tubing with all fitting & fixed complete to walls or ceiling or laid in floors.
S&F in repair wash basins, vitreous china (flat back or angle back type) size 630x450mm, including cutting for and pinning in ends of brackets or errecting stand and waste fittings 32 mm dia, brass, chromium plated for glazed ware sinks,basins,etc.with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed. but exclusive of fixing of supply and waste pipe complete all as specified and directed.
S&F in repairs viterious China squatting pan" Orissa Pattern" size 580x440mm white with integral foot rest including provision of lime concrete bedding (excluding (excluding flushing cistern and flush pipe)
S&F in repairs 10 Ltr capacity PVC valveless, syphonic action type Flushing Cistern, low level white with inlet ball valve float & handle including brackets & connection to pipes
S&F PVC connector 15mm size with PTMT nuts of length 600mm .
S&F in repairs 15mm bore fancy type chromium plated bib taps with crutch of butterfly handle screwed down for iron pipes.
S&F 15mm bore stop valve fancy type,chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions.
S&F in repair pillar taps 15mm dia bore fancy type with capstain heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe.
S&F brass chromium plated tubular towel rail, 20 mm dia, D type, 60cm long between flangs.
Supply and fix in repairs brass chromium plated shower rose with or without swivel joints, any size including fixing to steel pipe or union
S&F CP Soap dish complete all as specified and directed.
S & F Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm wood grained printed PVC sheet used reinforced with MS square tube instead of plain colour PVC sheet & edges will be painted to match with printed sheet.
S&F Factory made solid PVC moulded door shutter 28 to 30mm thick with particle board coare, 28 to 30mm thick (stiles) 2,4 or 6 raised panel design with 2mm thick moulded Prelam PVC sheet on the front face and 2mm prelam PVC sheet on back face as per specification and drawing
S&F 125 mm size type B-21 butt hinges, extruded aluminum alloy with galvanized MS sheet hinges pin anodized.
S&F 150mm size extruded aluminum alloy handles, fabricated type, anodized.
S&F 200mm long aluminium anodized barrel tower bolts of extruded section.
Demolition and breaking up 100 mm dia internal dia bore drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar
Supply and fix 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring loints, fixed to walls only integral water proofing compound
Supply and fix 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring loints, fixed to walls only integral water proofing compound
Supply and fix 75 mm bore PVC (SWR) bends in any types.
Supply and fix 110 mm bore PVC (SWR) bends in any types.
Supply and fix 110 mm bore PVC (SWR) branch piece, single (Single Y) equal or unequal
Supply and fix 110 mm bore PVC (SWR) vent cowl
S&F for rolled mild steel in joist channel angle or Tee section fxed indipendently wthout connecting plates etc confirming to Fe-410-W(Gde-E-250) quality-B of all specified and directed.
S&F for rolled mild steel sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates confirming to Fe-410-W(Gde-E-250) quality-B of all specified and directed.
S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws as specified.
M&L Brick work with sub class B bricks straight or curved on plan to any radius in half brick thick walls, built in cm 1:4
M & L for broken brick aggregate hard core of gauge not exec 63 mm deposited, spread and levelled in layers n exc 15 cm thick, watered and rammed toa true surface all as specified and directed by Engr-in-charge.
M&L PCC 1:3:6 type C2 using 40 mm graded stone aggregate as in Plinth protection 75 mm thick
M&L for providing 100 mm thick cement concrete type C-2, 1:3:6 using (40 mm graded brick aggregate) as in path or paveway finished rough without using extra cement complete all as specified and directed.
M&L 25 thick P.C.C (1:2:4) type B-O using 12.50 mm graded stone aggregate as in floor finished rough.
Schedule'A' Part-I: E & M works
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. Complete all as specified and directed
Point wiring with PVC insulated and unsheathed multistranded FRLSH copper conductor single core 1.5 Sqmm (nominal area) cable using approved colour code as per IS drawing in and incl PVC casing and capping (ISI Mark) with all accessories including providing sunk cast pressed steel terminal boxes off size made out of 1.5mm thick MS sheet duly painted with black bitumen paint over a coat of red oxide primer and providing 3 mm thick plastic laminated bakelite sheet(HYLUM BRAND) top cover alongwith copper earth wire PVC insulated & unsheathed multistranded(FRLSH) copper conductor cable of size 1.5 Sqmm as continous earth wire connected to common earth and earth dolly complete all as specified
One light / Fan / Bell Point controlled by one way switch 5 Amp.
One 3 pin 5 Amp socket out let controlled by one switch on same board.
One 3 pin 5 Amp socket out let controlled by one switch on independent board.
Point wiring for Power point contolled by one 15 Amp switch independent with PVC insulated and unsheathed multistranded FRLSH copper conductor single core 2.5 Sqmm (nominal area) cable using approved colour code as per IS drawing in and incl PVC casing and capping(ISI Mark) with all accessories including providing sunk cast pressed steel terminal boxes off size made out of 1.5mm thick MS sheet duly painted with black bitumen paint over a coat of red oxide primer and providing 3 mm thick plastic laminated bakelite sheet(HYLUM BRAND) top cover alongwith copper earth wire PVC insulated & unsheathed multistranded(FRLS) copper conductor cable of size 2.5 Sqmm as continous earth wire connected to common earth and erth dolly complete all as specified and as directed.
Supply & fixing switch piano flush type (ISI marked), single pole, one way 5/6 Amp, 240 Volts complete all as specified & directed.
Supply and fixing socket outlet 2 in 1, 3 pin, 6 Amp piano complete all as specified & directed.
S&F switch socket combination, multipurpose 2 in 1, 5/6 pin ,15 Amp flush type (ISI marked) complete controlled by one switch complete all as specified and directed .
Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. all as specified and directed.
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet,10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete .PF not less than 0.85 (min),1000 Lumen output incl .
S&F as in replacement LED building security light 25 watt, 230V, 3000 Lumen output complete, IP66 with all accessories and including connecting up to ceiling rose with 0.5 sqmm three core copper flexible conductor cable, One GI medium grade 20mm dia bracket of total length 50 cm and fixed to wall with 2 Nos MS Clamp and fastener incl dismantling taking down unsv fitting any type all as specified and directed. Make-Havells, Model - ENDURAPEARLSL25WLED757SASYTOPC Or equivalent approved make of Crompton/Philips/Jaquar
S&F lamp Holder insulated body with back plate for batten fitting incl dismentling taking down unsv one all as specified and as directed.
Supply and fixing of LED Adore 1 x 9 watt,825 lumen output, B-22 CDL, Ball lamp(pin type), 230 volt,PF not less than 0.85(min) incl.Complete all as specified and directed.
Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers . Complete all as specified and directed
Supply and fixing ceiling rose, surface bakelite, 65mm x 50mm , two to three terminals complete all as specified & directed.
Material&Labour PVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 175 x 100 x 50mm .
S &F Miniature circuit breaker single pole and neutral 40 Amps, 230 volt, 10 KA, C-curve all as specified and directed.
S &F Miniature circuit breaker single pole 6 to 32 Amps, 230 volt, 10 KA, C-curve all as specified and directed.
Supply & Fixing sheet metal enclosure with double door for DBs conforms to IS:8623.III , IP:43 protection, shrouded neutral bar and cement spill protector, 8 way, 240 Volt .
Supplying and Laying testing PVC insulated steel wire /strip armoured cable 16sqmm 2 core heavy duty,1100 Volt grade, multistranded aluminium conductor cable laid into trench, passing through pipe,ducts,making electrical connection over pole/panel at one end and into the MCB DB's /Main switch/Change over switch through proper lugs /thimbles at the another end ,having following nominal cross sectional area all as specified and directed.
M & L for surface sub main wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 2.5 sqmm (Nominal area) drawn through in and including PVC casing caping/PVC conduit size with all fittings and accessories alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 2.5 sqmm as earth lead and connected to earth dolly and making good to disturbed surfaces all as specified and directed. NOTE: (a)Two run of cable with one run of earth wire and one run of casing capping/conduit will be measured as one length.
Supply and fixing 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. Complete all as specified and directed.
Supply and fixing PP-R Gate valves 25 mm outer dia (brass insert) fitting complete all as specified and directed.
Making connection of PP-R distribution branch with PP-R main of following sizes by providing and fixing tee including cutting and making fusion joint etc
Supply and fixing PP-R Gate valves (brass insert) (ballcock body) with epoxy coated Al rod & HD ball of size 25 mm dia for PVC over head tank inside PP-R pipe including taking out old unserviceable float valve Complete all as specified and directed
Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc.Complete all as specified and directed.
Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed fancy type chromium plated.Complete all as specified and directed.
M&L for point wiring with 4 Sqmm multistrandedc copper conductor 1100 volts grade FR PVC insulated unsheathed cable with proper colour coding drawn in PVC casing caping with FR PVC 4 Sqmm multistranded unsheatheed copper wire for continious earth, sunk in cast iron/MS terminal box 2.8 mm thick duly painted with aluminium inside and antocorrosive paint out side including connecting earth for 3 pin socked outlet, 15 Amps , independent board inclusing making good to the disturbed surface all as spd and directed by Engr-in- charge. Note: (a) Wiring shall be done by using colour coding. (b) Earth wire shall be of green colour (c) After completion of all wiring diagram of internal circuit with inventory shall be produced by cotractor duly sign by user to Engr -in-charge.
Supply & Fixing Switch socket combination 2 in 1 3 pin, 15Amp flush type universal Make : Anchor Penta/Panasonic vision/L&T.
Supply & Fixing tube 15mm bore medium grade, galvanised with all fittings and fixed complete to walls and ceilling or laid in floors complete all as specified and directed.
Supply& Fixing Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed,fancy type chromium plated. Complete all as specified and directed.
NOTES :- 1. The amount of schedule of credit shall be deducted from the total of this BOQ for arriving at contract sum. 2. Unless otherwise specified the rates for PCC shall deemed to include the cost of formwork shuttering etc, required for complete and proper execution of the work. Refer Schedule 'A' notes for details.
SHRI RAJESH DEY
M/S NIYATI NETWORK
SHRI CHANDAN CHANDA
SUMAN DEB
M/S PRITAM ENTERPRISES
SHRI SUBRATA GUHA
Pranjit kar
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .