SPECIAL REPAIR TO ATHITHI BLOCK AT AF STATION JAMNAGAR

Amount

Demolition of concrete surfaces in ground floor and paving n.exc. 15cm thickness (below or above ground level) all as Specified.

M&L cement concrete 1:4:8 type D-2, (40 mm graded stone aggregate) as in Sub base of floor, foundation and mass concrete all as specified.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish of the premises all as specified

M & L for 25 mm thick cement concrete type B0 1:2:4 (using 12.5 mm graded aggregate) as in flooring complete all as specified.

M&L for light shed vitrified coloured tiles 600x600x 8 to 10 mm thick (square / rectangular) polished, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles over and including 15 mm thick screed bed in CM 1:6 complete all as specified. Make:- Johnson / AGL / Somany

All as per item No 5 above but in skirting in CM 1:4

S&F in repairs stainless steel kitchen rack of size 31"x 36" x10" complete all as specified and directed by Engr-in-charge. Make : Blue Star, Prayag, Nirali.

M&L coloured Non skid ceramic joint free floor tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles over and including 15mm thick screed bed in CM 1:6 complete all as specified . Make:- Johnson / AGL / Somany

M&L for glazed ceramic Coloured tiles in vertical surface 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles over and including 10mm thick backing coat in CM 1:4 complete all as specified. Make:- Johnson / AGL / Somany

M&L for rounding to edges of stone slabs one edge, such as in steps cooking platform, and other similar situation.

M&L for Granite work 16-18 mm thick (table rubbed and polished) in steps, treads, jambs, pillars, window cills, cooking platforms and like in 10 mm thick cement mortar (1:4) including pointing in white cement with admixture of pigment to match with shade of granite.

M&L for green Marble work 15 to 18 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in coloured cement (1:2) using marble dust with admixture of pigment to match with marble shade laid over and including 15 mm thick screed bed in CM 1:6 complete.

Taking down cement plaster in cement or cement lime mortar on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc, Including removal of debris out side MD land all specified and directed.

M&L for rendering 10 mm thick on concrete surface in cement mortar (1:6) as backing coat and 5 mm thick in CM 1:4 using finishing the surface even and smooth without using extra cement, including mixing of liquid water proofing compound @ 200ml per 50kg cement bag or as per manufacturer instruction complete all as specified and as directed on External surface. Note:- WPC will be measured & Paid separately

M&L for plastering 15mm thick in CM 1:6 on brick or stone walls to be finished even and smooth (without using extra lime or cement) all as specified and directed .

M/L cement plaster 5mm thick in CM 1:3 on concrete surface as on ceiling finished even and smooth with out using extra cement complete all as specified.

M&L 3 mm thick wall care putty on wall complete all as specified and directed by Engr-in-charge,

M & L for preparation of new plastered/concrete surfaces of walls, and applying two coats of distemper oil emulsion of approved shade/tint over a coat of compatible priming paint complete all as specified. Make:- Nerolac / Asian / Berger

M & L Preparation of new ceiling surfaces and applying two coats of oil distemper emulsion on ceiling surfaces complete all as specified. Make:- Nerolac / Asian / Berger

Supply only Liquid water proofing compound

M&L for preparation of new external surfaces of walls and two coats of weather proof exterior emulsion paint, over a coat of primer as per manufacturers instructions etc complete all as specified and directed by Engr-in-charge, Make :- Nerolac (Excel), Asian 'Apex", Dulux " Weather shield water proof", Berger "weather coat all guard'.

M & L Preparation of old distempered and painted surfaces including washing, rubbing down and stopping by brooming down , scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat oil bound distemper on wall and ceiling surface on wall surfaces. Make:- Nerolac / Asian / Berger

M&L preparation of old decorated by brooming down scrapping down smoke soot, mould, moss and efflorescent salts and trading oil and grease spouts and cleaning with water on wall applying one coats of Acrylic emulsion (exterior weather coat) paint of any tint as approved complete all as specified. Make:- Nerolac / Asian / Berger

M & L for preparation of old decorated surfaces of walls (plastered or unplastered) and cornices, by brooming down , scrapping down smoke soot, moss and efflorescent salts and trading oil and greasy spots etc and applying one coat of white wash on walls all as specified and directed by Engr-in-Charge.

M&L for preparation old wooden surfaces of any description not otherwise described over 10cm width or girth one coats of synthetic enamel paint complete all as specified. Make:- Nerolac / Asian / Berger

Demolition of brickwork, stone boulder masonry built in cement mortar or cement lime mortar Including removal of debris out side MD land all specified and directed.

M & L for providing precast cement concrete (1:5:8) (using 20mm graded stone aggregate) solid building blocks exc 10 cm thick, in width (with plain or inter locking joints as directed) setting in CM 1:6 complete in wall or pillars all as specified and directed.

Cutting openings, through brick walls for door, window and other openings or enlarging existing openings. converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc.. to store and rubbish not exc. 50m

Taking down Shutters of any description exc 1 sq. m and n exc 2 sq. m each

S & F 40mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified. Make : Prince timber Jamnagar, MP Wood Indore, A-1 Teak product PVT Ltd Indore, Century Plywood Ltd, Kitply

S & F 35mm thick II class HW Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified . Make : Prince timber Jamnagar, MP Wood Indore, A-1 Teak product PVT Ltd Indore, Century Plywood Ltd

Taking down chowkhat or frame not exc 1.5 Sqm but with shutter (Without taking off shutter from frames)

S&F solid PVC door frame of size 50X 95 mm made out of 5 mm single side prelim PVC sheet reinforced with MS tube supplying and fixing in opening as per specification and drawing. Make:- Rajshri / Sintex / Duraplast

S & F factory made solid panel PVC door shutter 30 mm thick (stiles) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, as per specification and drawing Make:- Rajshri / Sintex / Duraplast

M & L for 100mm long mild steel butt hinges medium grade complete all as specified.

M & L Aluminium anodised, barrel tower bolts of extruded section and fixed Make :- Classic / Crown / Aluminium Udyog

S&F 150mm Extruded aluminium alloy handles, fabricated type, anodised Make :- Classic / Crown / Aluminium Udyog

S&F 250mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed Make :- Classic / Crown / Aluminium Udyog

S & F 300mm long mild steel ordinary rat tail pattern springs including roller and roller plate complete

Supply fabricate & fix in position anodised aluminium powder coated (minimum thickness of powder coating 50 micron) three track window ( two shutters glazed & one shutters wire gauge) with frame, glazed with 4 mm thick tinted glass and, wire gauge with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm including rubber bead joining cleat for fixing in position, concealed type lock for all three shutter, PVC roller etc all as specified below, including provn of locking device in each shutter complete all as specified and directed. (a) Frame (top & side) section shall of size 92.00 x 31.75 x 1.50 mm ( Section No 20831) (b) Frame (bottom) section shall of size 92.00 x 31.75 x 1.50 mm ( Section No 20832) (c) Top & side Members of shutter Section shall be of size 18.00 x 40.00 x 1.55 (Section No 20738)

(d) Shutter Interlock Section shall be of size 18.00 x 40.00 x 1.45 (Section No 20737) (e) Bottom Members of shutter Section shall be of size 18.00 x 40.00 x 1.55 (Section No 20736) (f) Member for wire gauge shutter shall be 18.00 x 43.50 x 1.35 (Section No 20791). Note:- Section No given above are of make Jindal, Contractor may use similar section of Make Hindalco / Nalco

Supply fabricate & fix in position anodised aluminium powder coated (minimum thickness of powder coating 50 micron) Fixed type window , glazed with 4 mm thick tinted glass including rubber bead joining cleat for fixing in position all as specified below. (a) Frame (top, bottom & side) section shall of size 92.00 x 31.75 x 1.50 mm ( Section No 20831) Note:- Section No given above are of make Jindal, Contractor may use similar section of Make Hindalco / Nalco

Supply and fix Aluminium ventilator, louvers type, frame top & bottom of size 31 x 42 x1.60mm (section No 20558) rectangular tube of size 40x20x2mm (Section 14019 and middle vertical of size 42x46.20x1.60mm Section (20560) and clip for fixing wire mesh and glass of size 19x 17.30 x0.90mm (section No 19360) thick including stainless steel wire cloth 0.36 mm nominal dia of wire and 1.40 mm average width of aperture and fixed with stainless steel wire staples and supply and fixing 5mm thick glass louvers with blades of 100mm heavy duty with necessary rubber beading, gasket etc complete all as specified. Note:- Section No given above are of make Jindal, Contractor may use similar section of Make Hindalco / Nalco

M&L for preparation of new wooden surface of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer. Make:- Nerolac / Asian / Berger

S & F to Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified.

S&F 18/19 mm thick plywood (12 Nos of ply )grade BWR, type BB fixed width screws to timber frame work or ply wood including Ist class HW fillets of bullnosed splayed, chamfered or rounded edge etc. exc 3 and n. 6 sqcm Make:- Century ply / Green Ply / Kit Ply

M&L for decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions Make:- Sunmica / Formica / Century Laminates

S&F Ist class HW plain fillets, rectangular wrought bullnosed splayed chamfered or rounded of sectional area n.exc 3 sq cm fixed on around edge of plywood by fevicol or headless nails all as directed and specified

S&F 75x19mm size SS cup board hinges medium weight cold rolled all as specified and as specified.

S&F ball catches with 8mm dia steel ball brass body and striking plate including letting in complete all as specified.

S&F in repair 28 mm dia stainless steel rod drapery rod cut to size and fixed in position, including all fitting complete all as directed.

Taking up or down 15 mm bore steel tubing and connections, complete all as specified and as directed

Taking up or down 25 mm bore steel tubing and connections, complete all as specified and as directed

Supply and fix 15 mm bore galvanised steel water tubing, medium grade including necessary fittings such as GI bends, tee, union etc fixed on wall / floor complete and connecting to water supply pipe line including concealed in wall all as specified. Make:- Tata / Jindal / Prakash Surya

Supply and fix 25 mm bore galvanised steel water tubing, medium grade including necessary fittings such as GI bends, tee, union etc concealed in wall / floor complete and connecting to water supply pipe line all as specified. Make:- Tata / Jindal / Prakash Surya

M&L for Cutting chases, of girth not exceeding 10 cm for concealed water tubing or concealed conduit wiring, etc. in stone / brick masonry wall built in cement mortar and making good, disturbed surface in Cement mortar 1:3 complete.

M & L for cutting holes into or through brick/ stones walls built in cement mortar superficial area n.exc 150 sq cm and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified.

All as per item No.57 above but area exc 150 Sq cm and n.exc 400 Sq cm

S&F in repairs Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or brass ferrule and fixed 25mm dia all complete and all as specified . Make Prayag or equivalent.

S&F in repair sinks made of stainless steel with drainage board 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engineer in Charge.(Make : Bluestar,Nirali or equivalent.) Make:- Nirali / Neelkant / Jain Brothers Sanitation Pvt Ltd

S&F in repairs corner glass self including bracket etc.complete all as specified and directed. Make : Jaquar cat No ACN-1173 equivalent series in KOHLER/Roca.

S&F brass chromium plated towel rail 600mm long all as specified

S&F in repair 15 mm size bib tap cast copper alloy fancy type, chromium plated, with capstan head, screwed down, screwed for iron pipe or for brass ferrule complete. Make: Jaquar Cat No.FLR -5047N equivalent series in KOHLER/Roca.

S&F in repairs 15 mm size single lever wash basin mixer without popup waste system with 450mm long braided hoses, fancy type, cast copper alloy, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nut, screwed for iron pipe complete all as specified. Make: Jaquar Cat No.FLR-5001B equivalent series in KOHLER/Roca.

Supply and Fix in repair 15 mm size Single Lever Wall Mixer with provision of Hand Shower, for mixing hot & cold water, cast copper alloy, chromium plated with L bend for shower, with all connected accessories, complete. Make: Jaquar Cat No.LYR-38119 equivalent series in KOHLER/Roca.

S&F in repair 15 mm size concealed stop valve with fitting sleeve, operating lever & adjustable wall flange with seal cast copper alloy, fancy type chromium plated, screwed down, high pressure with capstan head, screwed both end for iron pipe or for unions complete. Make: Jaquar Cat No.FLR -5083NK equivalent series in KOHLER/Roca.

Supply and fix in repair white vitreous China wash hand basin (Flat back) of size 580 x 450 mm fixed on and including new brackets complete including , 32 mm size brass chromium plated waste coupling, 750 mm long PVC waste pipe, PVC connection pipe, 15 mm size and 450 mm long with PTMT nuts and washer at both end etc complete. Make:- Hindware / Parryware / Cera

S&F in repairs Vitreous china wash down water closet pan pedestal pattern (EWC) including P or S trap, plastic water closet seat, closet pattern with flat bottom, and cover and aluminised hinge device complete all as specified and directed. Make:- Hindware / Parryware / Cera

S&F in repair 10 Ltr capacity PVC valveless, syphonic action type, flushing cistern low level, white, with inlet ball valve, float and handle including brackets, flushing pipe, 450mm long PVC Connection and connection to trap, and to flushing and making good to floor complete all as specified . Make:- Hindware / Parryware / Cera

S&F in repair Plastic water closet seat, white, closed pattern with flat bottom, and cover and aluminised hinging device complete all as specified and directed. Make:- Hindware / Parryware / Cera

S&F in repair ABS Body Hand Faucet with 1 metre long easy flex tube in chrome finish & wall hook , fixed to EWC all as specified and as directed. Make:-Jaquar Cat No.ALD -CHR-585 equivalent series in KOHLER/Roca.

S&F in repair 15 mm size Angular stop cock with wall Flange as specified and directed of Make : Cat No Jaquar Cat No.FLR -5053N equivalent series in KOHLER/Roca.

S&F in repair 600 mm long PVC connections 15 mm size with PTMT nuts at both end complete.

S&F in repair 32 mm dia Low density polyethylene pipes (LDPE) of pressure rating 6 kgf / cm2 fixed to wall or laid on floor complete.

S&F in repair Overhead Shower ø105mm Round Shape Single Flow with Air Effect (ABS Body & Face Plate Chrome Plated) with Rubit Cleaning System with or without swivel joints, suitable for 15 mm size pipe fixed to steel pipe complete. Make : Jaquar Cat No OHS-1709,equivalent series in KOHLER/Roca.

S & F in repairs 15mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified. Make:- Leader / Kirloskar / Zoloto

S&F in repair grating of size 150x150mm fixed with white or grey cement complete all as specified.

Dismantling wrought iron or mild steel work of any description not other wise provided for.

M & L Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165

S&F in repair cast iron Nahani trap 100 mm dia of outlet, with grating including jointing to waste pipe, fixed in cement concrete type B1 (1:2:4) using 20 mm graded stone aggregate complete.

S&F in repair cast iron floor trap 100 mm dia of outlet, with grating including jointing to waste pipe, fixed in cement concrete type B1 (1:2:4) using 20 mm graded stone aggregate complete.

S&F in repairs 75 mm dia , PVC (SWR) soil, waste and rain water drainage pipes single socketed in any length with rubber ring joints, laid in trenches or in floor or in walls with claims all as specified Make:- Finolex / Supreme / Prince

All as per item No 83 above but dia of pipe 110mm bore

S&F PVC Bends 75 mm dia all as specified

S&F PVC Bends 110 mm dia all as specified

S&F PVC Y junction 75 mm dia all as specified

S&F PVC Y Junction 110 mm dia all as specified

S&F PVC Cowl 110 mm dia all as specified

Taking down carefully (copper/aluminium) unserviceable point wiring complete of any type (batten/surface conduit or concealed) for light point, fan point, bell point ,socket point or power point including fixture and fitting such as switches , ceiling roses, pendants , regulators , sockets , light fitting etc. removing material to store for keeping in safe custody or for taking credit( credit for above items should be made as per conditions separately) and making good the disturbed surfaces of wall/floor or ceiling to match with existing surface and finishing the surfaces with distemper/white washing/colour washing as per existing complete all as specified and directed.

Taking down carefully by unscrewing from main switch boards/cut out boxes/MCB DBs / complete sealing the cable end and making good disturbed surface by walls etc.

Taking down carefully by unscrewing from fitting and fixtures such as ceiling fittings, bulk head fittings, tube light fittings , street light , flood LED lights etc all as specified and directed.

Material & Labour for concealed point wiring for one light / Fan point controlled by one, one way switch complete with 1.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed, fire retardant low smoke(FRLS) cable 1100 volts grade ISI marked drawn through and including Heavy duty PVC rigid conduit not less than 20 mm dia, including all accessories like bend, tees, junction boxes etc. including 1.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed, fire retardant low smoke(FRLS) cable as a continuous earth wire connected to common earth and earth dolly, etc excluding flush box suitable for modular switches complete. Make of wire: L&T/RR Kabel/Finolex Note: Rate of point wiring shall include cutting chases for conduit/flush boxes etc.

All as per item No 93 above but point wiring for one 5 Amps socket outlet on same board controlled by one-way 5 amp switch Make of wire: L&T/RR Kabel/Finolex. Note: Rate of point wiring shall include cutting chases for conduit/flush boxes etc.

All as per item No 93 above but point wiring for one 5 Amps socket outlet on independent board controlled by one-way switch. Make of wire : L&T/RR Kabel/Finolex. Note: Rate of point wiring shall include cutting chases for conduit/flush boxes etc

All as per item No 93 above but wiring with 2.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed fire retardant low smoke(FRLS) cable and 2.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed fire retardant low smoke(FRLS) cable as continuous earth wire connected to common earth and earth dolly for 15 Amps multipurpose socket outlet on independent board, controlled with one way switch. Make of wire : L&T/RR Kabel/Finolex. Note: Rate of point wiring shall include cutting chases for conduit/flush boxes etc

All as per item No 93 above but wiring with 4.0 Sqmm multi-stranded copper conductor PVC insulated, unsheathed fire retardant low smoke(FRLS)cable and 4.0Sqmm multi-stranded copper conductor PVC insulated, unsheathed fire retardant low smoke(FRLS) cable as continuous earth wire connected to common earth and earth dolly for 15 Amps multipurpose socket outlet on independent board, controlled with one way switch. Make of wire : L&T/RR Kabel/Finolex. Note: Rate of point wiring shall include cutting chases for conduit/flush boxes etc

M&L for Ceiling rose ceiling rose , 2 to 3 terminal PVC/ polycarbonate , isolated body type suitable for AC 230volts Make : Havells / Legrand / Polycab

M & L for module cover plate with frame for 2 module Make : Legrand/Anchor/Havells

M & L for module cover plate with frame for 3 module Make : Legrand/Anchor/Havells

M & L for module cover plate with frame for 4 module Make : Legrand/Anchor/Havells

M & L for module cover plate with frame for 6 module Make : Legrand/Anchor/Havells

M & L for module cover plate with frame for 8 module Make : Legrand/Anchor/Havells

M & L for Modular metal Flush box for 1/2 module Make : Legrand/Anchor/Havells

M & L for Modular metal Flush box for 3 module Make : Legrand/Anchor/Havells

M & L for Modular metal Flush box for 4 module Make : Legrand/Anchor/Havells

M & L for Modular metal Flush box for 8 module Make : Legrand/Anchor/Havells

M & L for modular switch 1 way 6 Amp 1 Module Make :- Legrand Arteor series Cat Part No :-573400 /Anchor/Crabtree

M & L for Modular Switch 1 way 16/20 Amp 1 Module ,Make :- Legrand Arteor series Cat Part No :-573410 /Anchor/Crabtree

M &L for Modular Socket 6A 2/3 Pin universal 2 module , Make :- Legrand Arteor series Cat Part No :-573470 /Anchor/Crabtree

M &L for Modular Socket 16A/ 6A 2/3 Pin combined 2 module , Make :- Legrand Arteor series Cat Part No :-573471 /Anchor/Crabtree

M &L for Modular fan step regulator 100 watt 2 module , Make :- Legrand Arteor series Cat Part No :-573416 /Anchor/Crabtree

S&F energy efficient LED tube light fitting integrated batten type with built in LED Chip & integral LED driver 21 watt, channel housing & diffuser of length 1200 mm (approx.) with all accessories, fixing arrangement internally pre-wired, fixed in position & connecting complete all as specified and directed by Engg –in-charge. Make :--Philips cat part no. BN O21C LED120S PSU CDL/NW GR(6500K) or equivalent in HAVELLS/WIPRO

S&F energy efficient LED tube light fitting integrated batten type with built in LED Chip & integral LED driver 10 watt, channel housing & diffuser of length 600 mm (approx.) with all accessories, fixing arrangement internally pre-wired, fixed in position & connecting complete all as specified and directed by Engg –in-charge. Make :-Philips cat part no. BN O21LED10S(6500K) or equivalent in HAVELLS/ WIPRO

Supply and fix in repair LED 12 W Porch light along with necessary fixing arrangement all as specified and directed by Engg-in-charge all as specified and directed. Make: Havells cat part No LHEOFJP7CUZ1W012/Wipro, Cat Part No P15127 or equivalent in Philips/CG

Taking down carefully (copper/aluminium ) submain wiring complete of any type (batten/surface conduit or concealed ) for socket point or power point complete with all fittings such as switches sockets pendants etc complete and making good disturbed surface of wall, floor or ceiling with plaster of tiles or roof treatment etc and finishing the surface with distemper white washing/co0lour washing to match with the existing surface complete all as specified and directed

M&L Sub main wiring using two single core PVC insulated FRLS cable 4 sqmm multi stranded copper conductor cable as main conductor and another single core 4 sqmm multi stranded copper conductor cable as continuous earth wire incl PVC casing and capping with all accessories and making good disturbed surfaces of wall, floor or ceiling with plaster and finishing the surfaces with distemper/white washing/colour washing to match with the existing surface complete as specified and as directed by Engr-in-charge . Note :2 runs of 4.0 sqmm copper cable & 1 run of 4.0 sqmm copper cable in and including PVC casing capping shall be measured as one unit.

M&L Sub main wiring using two single core PVC insulated FRLS cable 6 sqmm multi stranded copper conductor cable as main conductor and another single core 6 sqmm multi stranded copper conductor cable as continuous earth wire incl PVC casing and capping with all accessories and making good disturbed surfaces of wall, floor or ceiling with plaster and finishing the surfaces with distemper/white washing/colour washing to match with the existing surface complete as specified and as directed by Engr-in-charge . Note :2 runs of 6.0 sqmm copper cable & 1 run of 6.0 sqmm copper cable in and including PVC casing capping shall be measured as one unit.

M & L for distribution board (DB), double door (CRCA sheet) dust and vermin proof SPN 8 way with 100 Amps rated copper busbar, neutral bar, earth bar and cable ties for cable management, reversible door for IP 43 & IP 54, single pole and neutral 250 Volts, flush to wall complete with IP 54 protection complete all as specified and directed. Make : Legrand Model: IP 54 IK 09 507641 Ekinox or equivalent in L & T (Hager) / Schnieder (Multi-9).

M & L for distribution board (DB), double door type, as per IEC 61439-3 made out of sheet metal enclosure (CRCA sheet) dust and vermin proof MCB DB, TPN 4 way with 250 Amps rated copper busbar, 415 Volts with in built MCCB 160 Amps, 10 KA, 01 No.,2neutral bar and 2 earth bar IP 54 protection, cable ties for cable management(Fully insulated busbar and shrouded neutral bars),reversible door for IP 43 & IP 54 ,flush mounting to wall, including provision of MCB SP 6 to 32 Am,10KA -12 nos complete all as specified and directed. Make : Legrand Model: No.507750 Ekinox DPX 160MCCB IK-09 or equivalent in L & T (Hager) / Schnieder (Multi-9).

M&L for MCB single pole & neutral 240 volt C curve 10 KA (32 to63)Amps capacity IP 20 complete all as specified and directed Make - Legrand/Siemens/ Hager

M&L for MCB single pole,5 to 30 Amp 240 volt B curve 10 KA, IP 20 complete all as specified and directed Make - Legrand/Siemens/ Hager

S & F industrial type plug & socket board SP & N enclosure with 2 pole and earth metal plug & socket complete with 10 Amp MCB SP,Make: Legrand cat part No : 607841 or equivalent of Havell's , Schneider etc

M & L for earthing with SAFE EARTHING ELECTRODE (S.E.E) conforming to IS :3043-1987 with zinc coated earthing electrode with coating thickness of 100 microns using pipe in pipe technology method with 3 Mtr long, 42mm inner dia and 76mm outer dia GI rod connected with and including 25 mm x 3 mm size GI strip upto 7.5 m, fixing of electrode by boring 150 mm dia hole up to 3.30 meter depth in any type of soil with mechanical apparatus, returning filling with back fill compound(BFC) 25*2 KG compound bags including GI tubing 40 mm dia with necessary fittings light grade as protection to GI strip complete with FRP earthing protection chamber along of size 420 mm x 420 mm at top, 340 mm x 340 mm at bottom, height 210 mm with FRP chamber cover and including FRP Earthing result display board of size 254 mm x 380 mm made out of plastic material showing the information replated to type of earthing, earthing result, due date of testing etc along with fixing stand 610 mm height made of angle iron as per manufactures instruction and as specified and directed by Engg - in- charge. Make:- POWERTRAC McML Earthing solution / Ashlock

Vijay Construction Co

MAYUR ENTERPRISE

MADHAV ENTERPRISE

suvidhiconstruction

Magnus Enterprise

JAMNAGAR ELECTRIC AND MACHINERY CO

lakhanibrothers