SABARIMALA DEVASWOM AUGMENTATION OF ARAVANA FACILITY SUPPLY INSTALLATION AND COMMISSIONING OF STEAM HEATED STAINLESS STEEL PANS TRANSFER PUMPS AND COOLING TANKS WITH AGITATOR ETC .RETENDER

SUPPLY AND INSTALLATION OF STEAM HEATED STAINLESS STEEL DISH PANS, TRANSFER PUMP WITH TROLLEYS, COOLING TANKS WITH AGITATOR APPENDIX-A STEAM HEATED STAINLESS STEEL DISH PANS AT ARAVANA PLANT IN SABARIMALA WITH FOLLOWING SPECIFICATIONS: Capacity :500 Litres Size :1500mm dia x 600mm depth (approx) Material :AISI 304 6mm plate for vessel with SS flange and MS 6mm plate for jackets. Jacket :In two segments with separate inlet and outlet connections to control the heat and to save fuel consumption. No.of inlet :2 Nos No. of outlet :2 Nos Legs :Stainless steel..(72mm dia ,3 mm thick) Lid :Stainless steel 304 split type Overflow guard :SS overflow guard will be provided to protect the insulation. Insulation :Mineral wool with SS Cladding insulation. (insulation thickness 75mm)

APPENDIX-B SUPPLY AND INSTALLATION OF 5HP TRANSFER PUMP MODEL FSH 24 B2 CE GG IP WITH TROLLY AT ARAVANA PLANT IN SABARIMALA WITH FOLLOWING SPECIFICATIONS: Fluid handled :Hot Aravana Payasam Approximate specific Gravity:1.4 Approximate working Temperature :140 Degree C Pump type:Progressive cavity /Screw Suction side :Hopper SS fabricated with Stainless steel Tray Delivery :2 ½” ” NB, Pump speed :280 rpm, Pumping rate:6000 Litre/Hr, Motor rating :5 Hp, Suction head:flooded Discharge pressure:80 MWC, Direction of Rotation :counter clock wise, . Mechanical efficiency :48%, Volumetric efficiency :96%, Type of Drive:Geared motor, Electric motor :Foot mounting, sq,cage induction, Phase volts frequencies:3 ph, 415 v, 50 Hz Bearing House :Cast Iron –FG260, Pump Housing :SS, Rotor :SS, Other working parts :SS, Stator :EPDM food graded, Shaft sealing :PTFE, Base frame Type :Direct driven type Base Specification :“C” type MS fabricate with flexible coupling & Guard - Remarks: Works inculding stainless steel Hopper trolley for feeding aravana payasam dishpan to transfer pump or additional fittings and Labour charge for feeding aravana payasam cooling tank to transfer pump

APPENDIX-C SUPPLY AND INSTALLATION OF ARAVANA COOLING TANK WITH AGITATOR AT ARAVANA PLANT IN SABARIMALA WITH FOLLOWING SPECIFICATIONS: Vessel Size :1200 Ø x 2300 Height mm. Shape :Cylindrical Vertical and top flat Lid. Jacket ":50mm on the sides and bottom. A spiral water path of approximate 150 mm gap is provided inside the jacket using 6 mm flat inside the jacket to prevent direct passage of water from inlet to outlet . Vessel & Jacket Bottom : SS 304 grade 5 mm thk. Vessel & Jacket Body : SS 304 grade 4 mm thk. Mounting : On 4 Nos. SS pipe legs 80 mm Ø x 4.5 mm thk., 600 mm height, with SS base Plate Agitator 3 HP Motor With Suitable RPM Gear Box Design of lid: The vessel is provided with a Lid in 3 pieces- first piesce with SS wire mesh for escape of water vapor,and center piece fixed type over which the agitator is supported and the last piece hinged type for cleaning purpose