Construction and repairing works at Khoirabari CHC

Amount

(A) Repairing of C.H.C Main Bldg: Civil Work Demolishing C.C floor of various thickness including top layer and base course and disposal etc.

Demolishing the plastering from walls/R.C.C and P.C.C member without causing any damage to be etc for all level.

Dismantling all types of corrugated/trapezoidal sheet roofing including, hips, valleys and gatter etc.

Providing corrugated galved Iron sheet roofing of TATA SHAKTEE/SAIL including fitting and fixing necessary galvenised etc. (c) 0.55mm thick

Providing galved iron ridging of TATA SHAKTEE / SAIL including supplying and fixing necessary galved screws/washers etc. (c) 0.50 mm thick (ii) 230 mm lapping

Providing soling in foundation and under floor with stone/ best quality jhama bricks, and packed etc. (a) Brick on flat soling.

65 mm thick cement concrete floor consisting of 50 mm under layer of cement concrete in prop. 1:3:6 and 15 mm thick wearing layer in cement concrete in prop. 1:1:2 etc.

Providing wood work in frame (Chowkaths) of doors, windows, clerestory windows and other similar works wrought, framed and fixed in position etc. (b) With 1st class timber (Bonsum/ Sundi)

Providing fitting and fixing factory made wooden paneled doors with panel inserts of 75mm to 50mm width 12mm to 20mm thickness etc. b) With 1st class local wood (Hollock/Gamari/Sundi/Bonsum) (i) 40mm thick with panel inserts of 20mm thickness.

Providing fitting and fixing fully glazed window with sash bars including oxidized M.S but hings (75mm x 60mm x 3.15mm) etc. (b) With (Hollock/Gamari/Sundi/Bonsum) (i) 40mm thick.

Providing fitting and fixing fully galzed clerestory window and fan length including fitting and fixing 2 M.S pivot hinges (75mm x 20mm x 3mm) etc. (b) With (Hollock/Gamari/Sundi/Bonsum) (i) 40mm thick.

Providing brage board of size 200mm x 20mm with 1st class local Hollokh/Bansum etc.

Plain cement concrete floor base in prop1:3:6 laid in alternate bays as specified with coarse agg. of size 13mm to 32mm including etc. (ii) 50mm thick

15mm thick cement plaster in single coat on single or half brick walls for interior plastering upto 1st floor level etc. (B) On Fair side (b) In prop 1:4

Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirting etc. (a) Normal Range (Somany Varmora/Orient Make) ii) Of size 600mm x 600mm and above)

Providing polished vitrified wall tiles of approved quality, size, shape and thickness not less than 8mm on wall, skirting etc. i) Of size 300mm x 450mm and above

Providing plinth protection with brick flat laid in cement mortar 1: 4 and finished with 15mm cement plaster in prop. 1:2 with a floating coat of neat cement finish.

Providing drain with brick work in cement mortar in prop 1:5 with half brick thick side walls and 100mm thick CC (1:3:6) base over brick flat soiling including 15mm cement plastering etc.

Providing precast RCC slab in prop 1:2:4 reinforced with 10mm TMT/HYSD bars @ 150mm cement both Ways tying with 20 gauge black annealed etc. (b) 75mm thick slab.

Providing and fixing clear sheet glass bedded in putty and fixed with/without wooden bidding etc. (2) Area of glass panes exceeding 0.15m m2. (c) 3.00mm thick.

Supplying, fitting and fixing anodised aluminium fittings of approved make, seasonably smooth, free from sharp edges and corners, with counter sunk holes for screws etc. (a) Sliding door bolts (i) 300mm x 16mm

Supplying, fitting and fixing anodised aluminium fittings of approved make, seasonably smooth, free from sharp edges and corners, with counter sunk holes for screws etc. (b) Tower bolts (ii) 250mm x 12mm

Supplying, fitting and fixing anodised aluminium fittings of approved make, seasonably smooth, free from sharp edges and corners, with counter sunk holes for screws etc. (C) Door handles (iii) 150mm

a) Removing white or colour wash wire brushing and/or scraping sand papering and preparing the wall etc.

(c) Applying one coat of distemper primer of approved brand and manufacture on new wall surface etc.

(f) Distempering with dry distemper of approved brand and manufacture (two coats) and of required shade ojn new wall surface etc.

(a) Applying one coat of cement primer of approved brand and manufacture on new wall surface after thoroughly brooming the surface etc.

(b) Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on new wall surface (two coats) to give an even shade etc.

Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint etc. (b) General pourpose (Asian paint/Nerolac paint/J&N paint)

Applying mordent solution of approved brand and manufacture (Asian paint/Berger paint/ICI paint/J&N paint/Nerolac) etc.

Painting two coats on new GCI sheets with ready Mixed anticorrosive paint of appropriate brand and Shade suitable for painting over GCI sheets etc.

Sanitary Fittings Providing fitting and fixing white china pedestal type water closet (European type W.C pan 400mm high) or Parryware/Hindware etc. a) White

Providing fitting and fixing white vitreous water closet squatting pan (Indian type pattern) of size 580 x 240mm with 100mm SCI 'P' or 'S' Trap of Parryware/Hindware etc.

Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing wiyh clamps etc. (a) In exposed surfaces or in trenches. (ii) 110mm dia.

Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing wiyh clamps etc. (a) In exposed surfaces or in trenches. (iv) 75mm dia.

Supplying fiting and fixing 87.5 degree PVC bend of (Supreme/Prince) or other ISI approved including joining , fitting and fixing with clamps etc. (a) In exposed surfaces or in trenches. (ii) 110mm dia.

Supplying fiting and fixing 87.5 degree PVC bend of (Supreme/Prince) or other ISI approved including joining , fitting and fixing with clamps etc. (a) In exposed surfaces or in trenches. (iv) 75mm dia.

Supplying fiting and fixing PVC single tee with door of (Supreme/Prince) or other ISI approved including joining, fitting and fixing etc. B) Concealed by chiseling or breaking brick wall/CC/RCC and making good to the damages. (ii) 110mm dia.

Supplying fitting and fixing PVC reducer of (Supreme/Prince) or other ISI approved including Joining, fitting and fixing with clamps etc.. a) In exposed surfaces or in trenches. Iv) 110mm x 75mm

Providing fitting and fixing 75mm dia. P.V.C cowel of I.S.I make complete as directed and specified.

Construction of filter bed soak pit including earth work in exacavation of soil and then filling up of the trench with brick bats/Charcoal with earth over a layer of A.C.plain sheet etc.

Construction of inspection pit inside measurement 450mm x 450mm x450mm flush with 100mm diameter HCI/PVC pipes and cement concrete base in proportion 1:3:6 over flat brick soling etc.

Providing vitreous China wash basin with CI/MS brackets, C.P brass Chain with plug, PVC waste pipe including painting etc. 1.13.1 PEDESTAL BASIN (With Pedestal) (A) Parryware make (a) White (iii) Qube 600x460 (Cat No.C844D/G) (White/Coloured)

Providing fitting and fixing CP towel rail etc complete. (b) Sona make (iii) Towel rail Diplomat 600mm long (Cat. No.TR-0605)

Providing fitting and fixing Mirror with plastic frame of size 500 x 400mm of etc complete.

Providing, fitting and fixing soap tray/soap dish complete as directed. (a) Parryware Make (i) Recess SP & SG dish (Cat.No. C9935)

Clearing of service tank and removing the night soil and debris etc. (b) For 100 users.

Clearing of service tank and removing the night soil and debris etc. (c) For 50 users.

Supplying, fitting and fixing G.I pipes of follow sizes,with all necessary R brand or similar approved etc. (ii) Concealed by chicelling or breaking brick wall/C.C wall/RCC wall etc. d) 25mm dia i) Using Tata (Medium)

Supplying, fitting and fixing G.I pipes of follow sizes,with all necessary R brand or similar approved etc. (ii) Concealed by chicelling or breaking brick wall/C.C wall/RCC wall etc. f) 15mm dia i) Using Tata (Medium)

Providing fitting and fixing Chrome plated (CP) stop-cock of approved brand and size etc. (i) Jaquar (a) Continental/Clarion (ii) 15mm dia (Angular stop cock)

(B) Construction of Garage: Earth work in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. (A) Up to a depth of 2 m below the existing G.L. (a) In ordinary soil

Providing soling in foundation and under floor with stone/ best quality picked jhama bricks, and packed etc. (a) Brick flat soling.

Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing, steps, walls, etc. (b) In prop 1:4:8

Supplying, fitting and fixing in position reinforcement bars conforming to relevent I.S. Code etc. b) Other ISI approved TMT reinforced bar (SRMB/BISCON/TECH) (For Assam Type Bldg., drain B. Wall etc.)

Supplying, fitting and fixing in position reinforcement bars conforming to relevent I.S. Code etc. c) ISI approved MS rod

Providing form work of 2mm thick plywood board so as to give a rough finish including centering, shuttering etc. 3.2.1.1. Colums, pillars, posts & strut of square/rectangular etc.

Providing form work of 2mm thick plywood board so as to give a rough finish including centering, shuttering etc. 3.2.1.2. Sides and soffits of beam, beam haunchings, cantilever, etc. lintels etc.

Providing and laying plain/reinforced cement concrete work with coarse sand & 20mm down graded stone etc. (a) In Sub-Structure up to plinth level Foundation, footing, colums with base, tie & plinth beam, etc. (b) M20 or in prop.1:1.5:3

Providing and laying plain/reinforced cement concrete work with coarse sand & 20mm down graded stone etc. (a) In Sub-Structure up to 1st floor level. (ii) Columns, pillars, post, strut, suspended floor, roof etc. (b) M20 or in prop.1:1.5:3

Brick work in cement morter with 1st class brick including racking out joints and dewatering etc. (I) In Sub-Structure. (b) In proportion 1:4

Earth/Sand filling in plinth in layer not more than 150mm thick including necessary,carriage,watering,raming etc. (C) With Silt (predominently non plastic) by truck carriage including loading and unloading.

Providing and laying 25mm thick damp proof coarse with coarse aggregate with cement concrete in prop. 1:1.5:3 etc.

112mm thick 1st class brick nogged wall in cement morter in racking out joints and curing complete above PL up to 1st floor level. (a) In Prop 1:4

Providing fitting, hoisting and fixing of roof trusses including purlins fabricated out of M.S. black tube conforming to relevent I.S. code, as per approved design etc.

Providing fitting and fixing M.S angles MS flat MS bolts and nuts including painting etc. as directed. B) MS flat.

Providing corrugated galved Iron sheet roofing of TATA SHAKTEE/SAIL including fitting and fixing necessary galved etc. (d) 0.63mm thick

Providing barge board of size 200mm x 20mm with 1st class local Hollock/Bonsum etc.

15mm thick cement plaster in single coat on single or brick walls for interior plastering upto 1st floor level etc. A) On rough side (b) In prop 1:4

15mm thick cement plaster in single coat on single or brick walls for interior plastering upto 1st floor level etc. B) On Fair side (b) In prop 1:4

Cement plaster skirting with cement mortar in prop. 1:3 finished with a floating coat of neat cement etc. (a) 15 mm thick

65 mm thick cement concrete floor consisting of 50 mm under layer of cement concrete in prop. 1:3:6 and 15 mm thick wearing layer in cement concrete in prop. 1:1:2 etc.

Providing and fixing in position collapsible M.S. Shutter with vertical channels 20mm x 10mm x 2mm braced with flat iron etc.

c) Applying one coat of distemper primer of approved brand and manufacture on wall surface etc.

g) Distempering with dry distemper of approved brand and manufacture (two coats) and of required shade on new wall surface etc.

(a) Applying one coat of cement primer of approved brand and manufacture on new wall surface after thoroughly brooming the surface etc.

(b) Finishing wall with water proofing cement paint of approved brand and manufacture and of required ahade on on new wall surface (two coats) to give an even shade etc.

Applying priming coat over new wood and wood based surface over 100mm in girth/width after and including preparing the surface etc. (b) With ready mixed paint wood primer (pink)

Painting two coats (excluding priming coat) on new wood and wood based surfaces manufacture with enamel paint etc. (a) General purpose (Asian paint/Berger paint/ ICI paint/J & N paint/Nerolac).

(C) Construction of Generator Shed: Earth work in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. (A) Up to a depth of 2 m below the existing G.L. (a) In ordinary soil

Providing soling in foundation and under floor with stone/ best quality picked jhama bricks, and packed etc. (a) Brick flat soling.

Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing, steps, walls, etc. (b) In prop 1:4:8

Supplying, fitting and fixing in position reinforcement bars conforming to relevent I.S. Code etc. b) Other ISI approved TMT reinforced bar (SRMB/BISCON/TECH) (For Assam Type Bldg., drain B. Wall etc.)

Providing form work of 2mm thick plywood board so as to give a rough finish including centering, shuttering etc. 3.2.1.1. Colums, pillars, posts & strut of square/rectangular etc.

Providing form work of 2mm thick plywood board so as to give a rough finish including centering, shuttering etc. 3.1.1.4. Sides and soffits of beam, beam haunchings.

Providing and laying plain/reinforced cement concrete work with coarse sand & 20mm down graded stone etc. (a) In Sub-Structure up to P.L foundation, footing, column, with base tie and plinth beam etc. (b) M20 or in prop.1:1.5:3

Providing and laying plain/reinforced cement concrete work with coarse sand & 20mm down graded stone etc. (b) In Sub-Structure from PL up to 1st floor level. (ii) Columns, pillars, post, strut, suspended floor. (b) M20 or in prop.1:1.5:3

Brick work in cement morter with 1st class brick including racking out joints and dewatering etc. (I) In Sub-Structure up to P.L. (b) In proportion 1:4

Brick work in cement morter with 1st class brick including racking out joints and dewatering etc. (I) In Super-Structure from P.L upto 1st floor level. (b) In proportion 1:4

Earth/Sand filling in plinth in layer not more than 150mm thick including necessary,carriage,watering,raming etc. (C) With Silt (predominently non plastic) by truck carriage including loading and unloading.

Providing and laying 25mm thick damp proof coarse with coarse aggregate with cement concrete in prop. 1:1.5:3 etc.

Providing fitting, hoisting and fixing of roof trusses including purlins fabricated out of M.S. black tube conforming to relevent I.S. code, as per approved design etc.

Providing fitting and fixing M.S angles MS flat MS bolts and nuts including painting etc. as directed. B) MS flat.

Providing corrugated galved Iron sheet roofing of TATA SHAKTEE/SAIL including fitting and fixing necessary galved etc. (d) 0.63mm thick

Providing barge board of size 200mm x 20mm with 1st class local Hollock/Bonsum etc.

15mm thick cement plaster in single coat on single or brick walls for interior plastering upto 1st floor level etc. A) On rough side (b) In prop 1:4

15mm thick cement plaster in single coat on single or brick walls for interior plastering upto 1st floor level etc. B) On Fair side (b) In prop 1:4

Cement plaster skirting with cement mortar in prop. 1:3 finished with a floating coat of neat cement etc. (a) 15 mm thick

65 mm thick cement concrete floor consisting of 50 mm under layer of cement concrete in prop. 1:3:6 and 15 mm thick wearing layer in cement concrete in prop. 1:1:2 etc.

Providing and fixing in position collapsible M.S. Shutter with vertical channels 20mm x 10mm x 2mm braced with flat iron etc.

c) Applying one coat of distemper primer of approved brand and manufacture on wall surface etc.

g) Distempering with dry distemper of approved brand and manufacture (two coats) and of required shade on new wall surface etc.

(a) Applying one coat of cement primer of approved brand and manufacture on new wall surface after thoroughly brooming the surface etc.

(b) Finishing wall with water proofing cement paint of approved brand and manufacture and of required ahade on on new wall surface (two coats) to give an even shade etc.

Applying priming coat over new wood and wood based surface over 100mm in girth/width after and including preparing the surface etc. (b) With ready mixed paint wood primer (pink)

Painting two coats (excluding priming coat) on new wood and wood based surfaces manufacture with enamel paint etc. (a) General purpose (Asian paint/Berger paint/ ICI paint/J & N paint/Nerolac).

Khanin Warie

Riju Narzary