Internal Electrification of office building.

Amount

Circuit wiring( 2.5 Sqmm)

Primary power point wiring( 2.5 Sqmm)

Secondary power point wiring(located seperately not in the same box of primary power point)( 2.5sqmm)

Primary light/fan point wiring( 1.5 sqmm)

Secondary light point wiring( 1.5 sqmm)

AC point wiring( 4 sqmm )

16A switch with indication

6/16A socket

10A switch with indication

25A socket

3Pin plug top 16A

4P 32 A ,10 kA,Type C, MCB

4P 63 A ,10 kA,Type C, MCB

DP 63A, 30 mA RCCB

4P 63A, 30 mA RCCB

4P 32A, 30 mA RCCB

DP 20A ,10 kA,Type C, MCB

SP 20A ,10 kA,Type C, MCB

SP 10A,10 kA,Type C,MCB

Supply, Installation, Testing and Commissioning of 8-WAY 7 segment per phase isolation, Double Door AC Distribution Boardon wall /structure

Supply, Installation, Testing and Commissioning 12- way SPN DB on wall /structure

Supply, Installation, Testing and Commissioning 18- way SPN DB on wall /structure

Supply, Installation, Testing and commissioning of 400mm sweep,Wall mounted Fan

Supply, installation and commisioning of 2 ton Split air conditioners including stabilizer with 5 star rating Provision for Mounting Outdoor Units of AC along with PVC Piping for proper drain of water from AC.

supply & installtion of recess Mounted 40W LED lights.(2feetX2feet)

Supply & installtion of 200 mm wide ,GI ladder cable tray ( thickness 2mm, height 100mm) to carry power cables, & control cables including bends, tees, crosses, Elbows, accerrosies( hot dipped GI) like nuts, bolts, couplers etc and two run 50 mmX6mm GI-Flat/strip( hot dipped GI) along the cable tray for equipment/ system earthing

Supply,installation , testing of 3.5C X 50 Sqmm XLPE, AL armoured cable on tray /wall/trench

Supply,installation , testing of 4C X 16 Sqmm XLPE, AL armoured cable on tray /wall/trench

supply,installation,testing of 4C X 25 Sqmm XLPE-FRLS all armoured cable on tray /wall/trench

supply & installtion Electrical insulating rubber mats for electrical safety at Panels/ Motors

Supply and installation of 25x12 mm pvc casing/caping on wall/beam

Cable end terminatioms of 3.5 X50 Sqmm XLPE , Al cable including double compressed gland( brass) & Heavy duty long barrel crimping type copper lugs

Cable end terminatioms of 4C X25 Sqmm XLPE , Al cable including double compressed gland( brass) & Heavy duty long barrel crimping type copper lugs

Cable end terminatioms of 4 X16 Sqmm XLPE , Al cable including double compressed gland( brass) & Heavy duty long barrel crimping type copper lugs

supply & installation of FRLS type 4 sq mm -3 core flexible LT cable with copper conductor .

MS item like angels/channels/ plates as per site requirement etc for supporing cable trays/ eleectrical items ,including fabrication, welding, fixing with anchor fastener, Protection of MS item with two coat of black paint.

supply & installation of Steel flexible pipe ( dia 16mm to 25mm)

Supply & installation of 25mm dia MS conduit as per specification

Supply the tool kits for the equipmets as below a) Ratchet wrench spanner tool set( 32 pc) with carry box & combination of spanner wrench 6 mm to 22 mm with carry box b)Blower with dust extraction heavy duty

Supply & installation of Multi-lingual Danger Boards

Power Extension board with 4C , 4sqmm copper flexible cable of 5 metre length with Industrial plugtop and 4 pole MCB of 32A .

Supply & installtion of DLP alumin trunking size 105 mmx50mm with cover & finishing accessories on wall/ strucures/ floor

supply , installation testing & commisioning of LT Power supply distrubuton panel with 4P, 3phase. 125 A MCCB , Short circuit withstand for bus bars and droppers, as incomer with earth leakage module of minimum 100 mA sensitivity . 3 phase , 4P, 63 A MCCB- 3nos , 3 phase , 32A, 4P, MCB-5 nos , Bus bar should be copper including earthing , 2mm thick ness of CRCA sheet outer frame. LED indication for phase R,Y & B of Incoming & out going feedrs. Emergency stop to be provided, Panel control wiring should be copper 2.5 sqmm- FRSLS. It Includes with Volmeter & Ammeter

MONITOR ENGINEERING WORKS (BID ID -3173785)

MEPF INFRA (BID ID -3174082)