Loading…
Loading…
Tender Value
₹1.4 Cr
EMD Value
₹2.2 L
Closing Date
20 May 2025, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
TRD
15 conditions · 4 needing a document upload
The tenderer must have minimum average annual contractual turnover of V or V/N crore, whichever is less; were V= Advertised value of the tender in crore of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet
The tenderer must successfully completed or substantially completed any one of the following categories of work(s) during last 07(Seven)years, ending last day of month previous to the one in which tender is invited: (1) Three similar works each costing not less than the amount equals to 30% of advertised value of the tender, or (2) Two similar works each costing not less than the amount equals to 40% of advertised value of the tender, or (3) One similar work costing not less than the amount equals to 60%of advertised value of the tender,
10 conditions · 9 needing a document upload
Please submit your bank details i.e. Name of the Bank along with Bank Branch Code, Account Number, IFSC Code, PAN Number, Mobile Number and e-mail address
At the time of submission of bid, if you have any special Condition then upload in scanned pdf copy.
Please furnish list of personal, organization available on hand and proposed to be engaged for the subject work.
Please furnish list of plant and Machinery available on hand own and proposed to be inducted own and hired to be given separately for the subject work.
Please furnish list of Works completed in last Seven years (Ending last day of month previous to the one in which tender is invited) giving Description of Work, Organization for whom executed, approximate value of contract at time of award, Date of award and Date of Completion. Date of actual Start, Actual Completion and Final value of Contract shall also be given.
Please furnish list of works on hand indicating description of works, contract value, Approximate value of balance work yet to be done and date of award.
Tenderer should submit valid electrical contractor license issued by electrical inspector to state government with the offer. If electrical contractor license has been expired, tenderer should submit receipt of renewal electrical contractor license issued by electrical inspector to state government with offer also. At the time of contract agreement, contractor must submit valid electrical contractor license issued by electrical inspector to state government. If tenderer have not submit the valid electrical contractor license, the offer will be summarily rejected.
The tenderer whether sole proprietor/ a company or a partnership firm / joint venture (JV) / registered society / registered trust/HUF/ LLP etc. if they want to act through agent or individual partner(s), should submit along with the tender, a copy of power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favor of the specific person whether he/they be partner(s) of the firm or any other person specifically authorizing him/them to sign the tender, submit the tender, and further to deal with the Tender/Contract up to the stage of signing the agreement except in case where such specific person is authorized for above purposes through a provision made in the partnership deed/ Memorandum of understanding/ Article of Association/ Board resolution, failing which tender shall be summarily rejected.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The tendering firm must have valid Electrical Contractor's License issued by the Government in their own name. A copy of the license shall be uploaded along with the tender offer, failing which the offer shall be summarily rejected. The license must be valid as on the date of opening of the tender.
TRD work in connection with modification to along feeders by provision of separate masts to each feeder at various locations of Rajkot division.
DRM-RJT-EL-TRD-2025-26-06
DRM-RJT-EL-TRD-2025-26-06
Open
Works - General
8 Months
Rajkot, Gujarat
₹0
₹2.2 L
20 May 2025
22 Apr 2025
61 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 1,37,51,855.45 | ||
| — | 2.50 | — | — | ||
| Survey, Design and preparation of Sectioning diagram, OHE layout plan and SED as per technical specifications | — | — | — | 44,445.95 | |
| — | 35.00 | — | — | ||
| Supply of fabricated galvanised steel structure and SPS as per technical specifications | — | — | — | 49,61,458.6 | |
| — | 35.00 | — | — | ||
| Erection of fabricated galvanised steel structure and SPS as per explanatory notes | — | — | — | 4,46,890.5 | |
| — | 150.00 | — | — | ||
| Digging, Casting, Grouting of cement concrete foundation as per technical specifications and explanatory notes | — | — | — | 11,36,241 | |
| — | 16.00 | — | — | ||
| Supply of material for termination of Single conductor (including supply of 9 ton cut in insulator) as per technical specifications | — | — | — | 1,33,862.24 | |
| — | 16.00 | — | — | ||
| Erection of material for termination of Single conductor (including supply of 9 ton cut in insulator) as per explanatory notes | — | — | — | 28,593.6 | |
| — | 17.00 | — | — | ||
| Supply of Guy Rod assembly complete as per technical specification for high rise OHE | — | — | — | 1,88,649.85 | |
| — | 17.00 | — | — | ||
| Erection of Guy Rod assembly complete as per explanatory notes for high rise OHE | — | — | — | 37,011.21 | |
| — | 80.00 | — | — | ||
| Supply of 9 tonne cut in/Suspension insulator with feeder suspension assemblies as per technical specifications | — | — | — | 5,83,178.4 | |
| — | 80.00 | — | — | ||
| Erection of 9 tonne cut in/Suspension insulator with feeder suspension assemblies as per technical specifications | — | — | — | 85,264.8 | |
| — | 40.00 | — | — | ||
| Supply of Post/Support insulator as per technical specifications | — | — | — | 4,25,334 | |
| — | 40.00 | — | — | ||
| Erection of Post/Support insulator as per explanatory notes. | — | — | — | 50,680 | |
| — | 120.00 | — | — | ||
| Supply of all types of jumpers required for feeder connections with fittings as per technical specifications | — | — | — | 3,15,392.4 | |
| — | 300.00 | — | — | ||
| Supply of all types of galvanized bonds as per technical specifications | — | — | — | 96,372 | |
| — | 300.00 | — | — | ||
| Erection of all types of galvanized bonds as per explanatory notes | — | — | — | 17,553 | |
| — | 60.00 | — | — | ||
| Supply of retro reflective number plates as per technical specifications | — | — | — | 51,063.6 | |
| — | 60.00 | — | — | ||
| Erection of retro reflective number plates as per technical specifications. | — | — | — | 5,595.6 | |
| — | 10.00 | — | — | ||
| Supply of Earthing stations as per technical specifications | — | — | — | 47,497.1 | |
| — | 10.00 | — | — | ||
| Erection of Earthing stations as per explanatory notes | — | — | — | 16,679.2 | |
| — | 10.00 | — | — | ||
| Breaking of Concrete/ foundation/PCC of Mast, Portal and TTC as per explanatory notes | — | — | — | 39,515.3 | |
| — | 10.00 | — | — | ||
| Transportation of material from Railway depot to work site or released material from work site to railway depot | — | — | — | 44,705.6 | |
| — | 12.00 | — | — | ||
| Supply of GEARLESS HAND OPERATED PULLING AND LIFTING MACHINE 3.2 TONNE CAPACITY (TIRFOR) as per technical specifications | — | — | — | 3,32,760 | |
| — | 10.00 | — | — | ||
| Supply of GEARLESS HAND OPERATED PULLING AND LIFTING MACHINE 1.6 TONNE CAPACITY (TIRFOR) as per technical specifications | — | — | — | 1,85,850 | |
| — | 10.00 | — | — | ||
| Supply of RATCHET LEVER HOIST (PULL LIFT) OF 0.8 TON CAPACITY AS PER RDSO SPECIFICATION | — | — | — | 74,340 | |
| — | 10.00 | — | — | ||
| Supply of RATCHET LEVER HOIST (PULL LIFT) OF 1.6 TON CAPACITY AS PER RDSO SPECIFICATION | — | — | — | 87,320 | |
| — | 25.00 | — | — | ||
| Supply of Single Sleeve Pulley Block suitable with load capacity 3 Ton as per Technical specifications | — | — | — | 35,105 | |
| — | 25.00 | — | — | ||
| Supply of Steel Sling with eye to eye end, Length 01 Meter 19mm diameter | — | — | — | 15,664.5 | |
| — | 2600.00 | — | — | ||
| Supply of Copper feeder wire 150sqmm with feeder suspension assembly as per technical specifications and explanatory notes | — | — | — | 37,73,978 | |
| — | 2600.00 | — | — | ||
| Erection of feeder wire/cross feeder wire/large span wire as per explanatory notes | — | — | — | 3,26,534 | |
| — | 2000.00 | — | — | ||
| Dismantling of feeder wire/return conductor/cross feeder wire as per explanatory notes | — | — | — | 1,64,320 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .