Construction/up-gradation of link road to Village Gohan Km. 0/00 to 1/480 under SCSP. (SH- Providing and laying WBM G-III and tarring works in Km.0/00 to 1/480).

Amount

Providing and laying, spreading and compacting stone aggregates of specific size to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 KN static roller in stages to proper grade and camber, applying and brooming, stone screening/ binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density Grading III as per Technical Specification Clause 404, including carriage of materials, plants/equipments by all modes of transportation with in all leads and lifts and as per directions of The Engineer – in – Charge complete.

Providing and applying priming coat with bitumen emulsion (SS-1) using bitumen distributor at the rate of 0.85 kg. (Zero point eight five Kilogramme) per square metre on the prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per Technical Specifications clause of 502 including carriage of materials, plants/equipments by all modes of transportation with in all leads and lifts and as per directions of The Engineer – in – Charge complete.

Providing and applying tack coat with bitumen emulsion (RS-I) using emulsion pressure distributor @ 0.275 kg (Zero point two seven five Kilogramme) per square metre of the prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per Technical Specifications of clause 503 including carriage of materials, plants/equipments by all modes of transportation with in all leads and lifts and as per directions of The Engineer – in – Charge complete.

Providing and laying 30 mm (thirty five milimetre) thick bitumenous concrete with 100-120 PH batch type hotmix plant producing and average output of 75 tonne (Seventy five tonne) using crushed aggregates of specified grading premixed with bituminous binder @ 5.5 (Five point five) percent or mix and filler including addition Zycotherm @ 0.10 % (zero point ten percent) of weight of bitumen, transorting the hot mix to work site lying with a hydro static paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled vibratory and tendom roller to achieve the desired compection as per MORTH specification No. 50 including carriage of materials, plants/equipments by all modes of transportation with in all leads and lifts and as per directions of The Engineer – in – Charge complete.