SPL REPAIRS TO BLDG NO T-14 AT 06 ADV FD VET HOSP AND RA 123 COOK HOUSE, MT GARAGE, DRAIN AT REAR SIDE OF RA III, PROVN OF WINDOW FALSE CEILING T-01, 02 X WC RAIII, OF HQ UB AREA UNDER GE WEST BAREILLY

Amount

Taking down Chowkats or frames with shutters (Without taking off shutters from the frames) not exceeding 1.5 Sq. M each including iron mongries, hold fast etc and removing to or from store including making good disturbed portions of walls complete all as specified and directed.

Taking down Chowkats or frames with shutters (Without taking off shutters from the frames) exceeding 1.5 Sq. M but n.exc 4.0 Sqm each including iron mongries, hold fast etc and removing to or from store including making good disturbed portions of walls complete all as specified and directed.

M&L for Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured)

M&L for Treating the top surface of field earth at the rate of 5 litres of emlusion per sqm of surface area

M&L for Treating the soil under plinth protection at the rate of 5 litres of emlusion per sqm of surface area

M&L for Treating the soil alongwith external perimeter

S & F Pressed steel frames of size 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified and directed.

S & F Pressed steel frames of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified and directed.

M&L for PCC 1:3:6 type C0, 1:3:6 (using 12.50 mm graded stone aggregate) as in pressed steel frame complete all as specified and directed.

S & F Rolled Mild Steel angles, bars, flats etc, as in supports for stiffening of fencing, wall tiles, hold fasts, clamps and similar small articles confirming to Fe-410-O or Fe 310-O complete all as specified and directed.

M&L for Plain Cement Concrete Type C1 1:3:6 (using 20 mm graded stone aggregate) for embedding of holdfast complete all as specified and directed.

S & F 30 mm thick factory made Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides including teakwood lipping 6mm thick fixed with nails complete all as specified and directed.

S & F 35 mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., divided into squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with out mitred beads for securing glass etc as specified in SSR Part I, Section 8, clause 8.24 (a) fitted to chowkats complete all as specified and directed.

S&F 300mm long ordinary rat rail pattern springs including roller and roller plate complete all as directed.

S&F 200mm long mild steel barrel tower bolts, stove enamelled black, with bright bolts complete all as specified and directed.

Supply and fix mild steel, sliding door bolts, bolt type, stove enamelled black, with bright bolt not less than 12 mm dia with and minimum of 6 bolts and nuts, four on bolt plate and two on staple plate length of bolt 300 mm complete all as specified and directed.

S & F 150 mm long mild steel pressed handle, oval type, stove enamelled black complete all as specified and directed.

S&F floor door stopper of overall length of cover plate 140mm of aluminium alloy body and tongue, with hard drawn steel spring complete all as specified and directed.

M&L for preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer complete all as specified and directed.

S & F of steel windows glazed with side hung shutters including projecting type hinges with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed and all as per Drg No TD/088 dt 7 Jan 02. Note: Guard bar shall be measured and paid separatly under relevant item.

S & F of steel windows gauged with side hung shutters including projecting type hinges with steel handle and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed and all as per Drg No TD/088 dt 7 Jan 02. Note: Guard bar shall be measured and paid separatly under relevant item.

S & F Mild steel work in framed work such as grills, gratings,framed guard bars, ladders etc., with ends of bars shouldered and/ or riveted, or forged into spikes, and similar work confirming to Fe.290.Gde-E-165 complete all as specified and directed.

S & F Sheet glass 3.0 mm thick, ordinary quality and glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each pane glazed with putty or fixed with beads complete all as specified and directed.

S & F galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of apreture 1.18 mm & fixed with tinned takce or galvanised wire staples fixed .

M&L for preperation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer over 10cm width or girth.

M&L for preparation of old painted wooden surfaces of any description and applying one coat of synthetic enamel paint complete all as spd and directed by Engr-in-Charge

M&L for preparation of old painted steel surfaces of any description and applying one coat of synthetic enamel paint complete all as spd and directed by Engr-in-Charge

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises

M & L applying one coat of exterior exmulsion paint 1st quality of Apex of Asian Paint on AC sheet/Allahabad tiles roof etc including preparation of old decorated surface complete all as specified and directed.

M&L providing glazed ceramic tiles coloured 600X 300X 7mm/ thick in vertical surfaces like dado etc set and jointed in neat cement paste and pointed in coloured cement to match including 10mm rendering in CM 1:4 thick on brickwork or concrete sufaces finished even and fair including Dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing) , removing seviceable tiles to stores and rubbish of the premises and complete all as specified.

M & L for colour glazed ceremic coloured tiles in vertical surface 300 x 450 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick screed bed or bedding layer of cement mortar 1:4 cement and dismantling of wall tile including cement mortar bedding complete all as specified or as directed. all as spfd or as directed.

M&L providing non- skid glazed joint free ceramic tiles coloured7-8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but n xc 0.11 sqm, in floor etc including 15 mm thick screed bed in CM mortar 1:6 set and joited with neat cement slurry and pointed in coloured cement inclu to match coloured tiles including Dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing) , removing serviceable tiles to stores and rubbish of the premises complete all as specified and as directed. complete all as specified

M & L Non - skid Ceramic joint free coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

S & F in repairs 4mm thick E-Board tiles (Everest or equivalent) in patches for insulation and acoustic purpose of size 600x 600mm fixed with and including anodised aluminium snap grid with 25x25x1.5 mm thick Tee section and 38x25x2 mm thick angle with hanging/supporting arrangements as in false ceiling at bottom at spacing 60 cm centre to centre including necessary GI cleats and 4mm dia GI wire as suspender fixed to ceiling not exceeding 1.20 mtr centre both ways with dash fastners complete and making good disturbed surfaces including taking down old ceiling complete all as specified and directed.

Taking down existing cement plaster in cement mortar on brick/stone masonry walls etc incl racking out joints hacking for key scru bbing down with water all as specified (internal and external surfaces of manholes, septic tanks, etc).

M&L rendering 15mm thick on brick work or concrete surfaces in CM 1:4 and finished even and smooth without using extra cement including necessary scaffolding or Jhula complete all as specified and directed.

M&L rendering 15mm thick on brick work or concrete surfaces in CM 1:6 and finished even and smooth without using extra cement including necessary scaffolding or Jhula complete all as specified and directed.

M&L for 10mm thick rendering in CM 1:3 on ceiling surfaces finished even and smooth without using extra cement

M&L for 3 coats of white wash on newly plastered ceiling surfaces including preperation

M&L for applying two coats of oil bound distemper over one coat of white wash on newly plastered surfaces including perperation of new plastering surface including necessary scaffolding or Jhula complete all as specified and directed.

M & L for complete removal of old finishes from walls by scrapping, rubbing down, with sand paper to have even and smooth surfaces and applying two coats of oil bound distemper over one coat of primer complete all as specified and directed including necessary scaffolding or Jhula complete all as specified and directed.

M&L for 3 mm applying layer of birla wall care putty on wall/ceiling surfaces incl rubbing down the surfaces with sand paper after getting dried all as directed to obtain a smooth & even surface complete all as spd and directed.

M&L preparation of newly plastered surfaces and applying two coats of cement base paint on walls over a coat of primer all as specified & directed by Engr-in-Charge.

M&L for complete removal of old finishes from walls by scrapping, rubbing down, with sand paper to have even and smooth surfaces and applying two coat of cement base paint complete all as specified and directed.

M&L for preparing of old distempered surface of ceiling and applying one coat of oil bound distemper complete all as specified and directed

Cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good in PCC or CM not exceeding 10 cm girth complete all as specified and directed.

Demolition of brick or stone/boulder masonry, built in cement mortar.

M&L for brick work with sub class `B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:4 using old size bricks.

M&L brick work with fly ash bricks straight or curved on plan to any radius in half brick thick walls built in cm (1:4) all as spd and directed

Demolition of stone set paving of any desciption or thickness laid, bedded and pointed in any mortar.

M & L for 15-18 mm thick machine cut kota stone slab flooring and jointed with grey cement slurry fixed with pigment to match to shade of the slab including rubbing and mirror polishing over and including 20mm thick screed bed or bedding layer of cement mortar 1:4 cement and dismantling of floor tile including cement mortar bedding complete all as specified or as directed.

M&L for 15 to 18mm thick granite (of any type and shade) work (table rubbed and polished) in floors, steps, jambs, pillars, window cills, cooking plateforms and like in CM 1:4 incl pointing in white cement(1:2) using marble dust with admixture of pigment to match the shade of granite stone including grinding and polishing, moulding of edges complete over and incl 15 mm thick screed bed or bedding layer of mortar in cement mortar 1:4 complete complete all as spd and directed

M&L 75 mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate in sub base of floor.

Removal of existing treatment and wire brushing and cleaning top surface of tiles and roofs to preparation of surface for applying in primer and bitumen.

M & L cement concrete 1:2:4 of type B-2 (using 12.5 mm graded stone aggregate) as in filling and mass concrete.

M&L rendering 10mm thick in CM 1:4 on fair faces of brick or concrete surfaces and complete all as specifeid.

Applying evenly a coat of bituminous primer confirming to IS 3384 - 1986 @ 0.40 Kg/Sqm

M &L Applying evenly a tack coat of bitumen of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning cleaning surfaces

M&L APP based polymeric membrane minimum weight 3 Kg/Sqm and minimum 3 mm thick reinforced with polyster non wove fabric (wt not less than 150 gms/sqm) land on primed surface by forced application complete all as specified

M & L screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in cement mortar 1:4

M&L for Cement concrete tiles 20 cm x 20 cm x 20 cm thick, machine pressed : se jointed with grey cement and no pigment and pointed in neat cement slurry in floors, and cut and polished.

Supply only liquid water proofing compound Acrylic polymer Chemseal or equivalent

Dismantling of existing water tanks capacity exc 500 ltr but n exc 1000 ltr and removing to store and S&F rotational moulded polethylene water tank of 1000 ltrs capacity ( cylindrical vertical with closed top) hoisted and fixed in position all as pacific SSR Part- I

M & L for 75 mm thick cement concrete 1:3:6 type C-1, using 20 mm graded stone aggregate as in plinth protection laid to slop of 1:12, finished surface even and fair without using extra cement with and including all necessary form work to divide the area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 6 mm thick joints through out the thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three part of fine sand by weight) complete all as specified and directed.

M&L for PCC type C2, 1:3:6 (using 40 mm graded stone aggregate) in surface channels and drains complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth using extra cement, including forms, moulds , mitred/ stopped ends etc complete all as specified and directed.

Add or deduct for each 25mm girth or part there of over or under 30 cm ditto as per item No.4 above complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for.

M&L for reinforced cement concrete (nominal mix) type B1 1:2:4 (20mm graded stone aggregate) as in slabs etc , set in CM 1:6.

M&L for MS TMT Bar, 10mm dia & over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality confirming to Fe-410-W or Fe 290 (as in rungs/handles).

Ditto but 8 mm dia TMT bars.

Ditto but 6mm dia and over upto and including 8mm dia in stirrups, spaces and binders.

M & L formwork to chullah hoods, chajjas, trough and similar items including edges finished rough surfaces of concrete complete all as specified.

M & L formwork to sides and soffits of lintels,lintel bend, beams etc finished rough surfaces of concrete complete all as specified.

S&F 1.6 mm thick Stainless Steel Curtain Rod 25 mm dia of approved quality with two number decorative design as approved brackets fixed in brick/concrete wall and same finished knobs on each end of curtain rod all as directed and specified.

S & F in repairs 110mm bore PVC (SWR) pipe single socketed,in any length with rubber ring joints, laid in trenches or in floors incl taking down .

All as per item No. 76 above but fixed to walls.

M&L salt glazed stone wore gully traps square or rounded mouthed tape & fix 150 x 150 mm fiXed in cement concrete complete.

S & F galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of apreture 1.18 mm & fixed with tinned takce or galvanised wire staples fixed as in repairs.

S&F powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc.complete all as specified.

S& F for glazed aluminium door frame with side hung shutter and glazing fixed with and including 4.8mm th tinted glass and 12mm th prelaminated particle board with all aluminum necessary jointing cleat and 20 mm glazing clips rubber packing, anodized alumium fitted and maring good of wall surfaces with matching to existing surface compete all as specified and directed :- (a)Frame 100x44x1.48mm thick with rawl plug (b)Middle and lock rail :150x44x1.48mm thick (c)Bottom rail :150x44x1.48mm thick (d) Top rail/stiles :85x44x1.48mm thick (e)Aluminum beading : 0.70mm thick (f)Aluminium handle 'D' type 150mm long,alumium tower bolt 9.90mm dia shoot 200mm long, Mortice lock :100mm size 4 lever, aluminium sliding bolt : 300 mm long, aluminium floor mounted door spring.

S&F aluminium anodised window/vantilator frame with side hung shutter and glazing and including 4.80mm thick tinted glass with and including all aluminium fitting & necessary jointing cleats, glazing clip, rubber packing, anodised aluminium beading, screws, anodised aluminium fittings such as peg stay, hinges, handle 100mm long, tower bolt 100mm long, and making good of wall surface with matching to existing surface complete all as specified and directed for the following specifiecation:-. Frame : (a) 65 x 38 x 1.48mm thick (b) Top/Bottom & side style/rails of shutter : 44 x 38 x 1.98mm thick ( c) Aluminium beeding -0.8 mm thick (d) Alum fitting such as peg stay aluminium hinges aluminium handle 100 mm long alum tower bolt 100 mm long.

S&F in repair 15mm bore dia Stop valves/angle valves fancy type, cast copper alloy chromium plated screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed complete all as specified and directed.

Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified

Supply and fixed Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed

Supply and fix 200mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and directed.

Supply and fix 125 mm long Aluminium alloy handles, cast type, anodised complete all as specified and directed.

S& F in repair 15mm bore dia long body Bib taps fancy type , cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

M&L for 450 mm bore reinforced concrete pipes, class NP3, laid and jointed complete with collars.

Demolition and breaking up drain pipes, 450mm internal dia, (Salt glazed ware, AC or Reinforced concrete) set in cement mortar.

Excavation in trenches n.exc 1.5m wide & n.exc 1.5m depth for fdn etc or for shafts, wells, cesspits, manholes, pier holes etc n.exc 10 sqm on plan and n.exc 1.5 m in depth and getting out in any type of soil.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick in any type of soil.

Removing excavated surplus soil n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point.

M&L for concrete bed to drain pipes 450mm dia using cement concrete 1:3:6 type C2 including packing under and haunching against the sides of pipes after they are laid and tested in.

M&L for cement concrete in foundations, filling and mass concrete using type D2 1:4:8 (40mm graded stone aggregate).

Providing cement concrete type B1 1:2:4 (20 mm graded aggregate) set in Cm 1:4 as in copings.

M&L for plain cement concrete type B1 1:2:4 (20mm graded stone aggregate) as in benching, finishing surfaces of concrete.

Dismantling AC sheet (Corrugated/Semi-corrugated) in roof covering .

S&F 6 mm thick Asbestos cement corrugated sheet in roof, fixed with J or L hook or cranked bolt with washers.

M&L for prepainted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an color having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.

S & F prepainted galvalume aluminium zinc coating GI base plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / clading to wall, fixed with self tapping screws/L-type or J-type or cranked hook bolts dismantling of AC Sheet etc as complete all as specified and directed.

M&L for 6mm thick Asbestos cement two piece adjustable plain wing ridge 6mm thick fixed with L-type or J-type hook bolts complete all as specified and directed.

Dismantling timber scantling 40 Sqcm and over in section, in any position framed sections (roof trusses)

M&L for Dismantling framed trusses n exc 10m span

S & F Rolled sections as in main and cross beams, hip and jack rafters;purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates.

Dismantling structural steel work including doors, gates excluding framed trusses etc complete all as specified and directed.

Surface excavation n exc 30 cm and averaging 15 cm and getting out in any type of soil

Removing excavated material n exc 50m and depoting where directed at a level n exc 1.5m above the starting point.

M&L hard core of gauge exc 63mm but not exc 100 mm depoted ,spread and levelled in layers not exc 15 cm thick watered and rammed to a true surface broken brick/ stone or boulders

M&L for 100 mm thick PCC 1:3:6 type C-2 (40 mm stone agg) as in plinth protection finishing cement concrete even amd smooth without ung extra cement.

M&L for Machine pressed precast conctete interlocking paver block with gray cement and pigment any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade over 25mm thick sand cushioning including watering and consolidation complete all specified and directed.

M & L 75mm thick plain cement concrete type D-2 1:4:8 (40 mm graded stone aggregate) as in sub base complete all as specified and directed.

M& L for 30X30cm providing precast cement concrete rubber moulded chequered coloured tiles 25 mm thick even finished on top of approved design and pattern complete all as specified and directed screed bed or bedding layer of mortar 20mm thick in cement mortar 1:4 for laying floor finishes all as specified and directed.

M&L for 1mm thick Steel rolling shutters, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer ; erected in position as indicated, complete : push pull or manual type

S&F safety level locks mild steel with 4 levers for rolling shutters

S & F Ball bearing for rolling shutters

M&L for Precast cement concrete 1:2:4, type B1 (Using 20 mm graded stone aggregate) in landings, cover slabs (for manholes etc.) shelves and similar articles with plain faces and set in cement mortar 1:4 including demolition of existing reinforced cover complete all as specified and directed.

Cutting openings, through brick walls for door, window and other openings or enlarging existing openings. converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc.. to store and rubbish not exc. 50m

S&F Virified Ceramic tiles dark Shade/Double charged/ultracharged 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqmbut not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl dismantling of tiles and demolition of concrete base n. exc 40mm thick shade of the tile and M&L cement screed bed or bedding layer of mortar in CM 1:6 , 20mm thick for laying floor finishes all as specified & directed by Engr-in-Charge

S&F Virified Ceramic tiles dark Shade/Double charged/ultracharged 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqmbut not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl dismantling of tiles and demolition of concrete base n. exc 40mm thick shade of the tile and M&L cement screed bed or bedding layer of mortar in CM 1:6 , 20mm thick for laying floor finishes all as specified & directed by Engr-in-Charge

Cutting chases for GI consealed water tubing and making good with cement sand mortar 1:3 cutting n exc 10cm girth

S&F in repairs health faucet 1 mtr PVC tube with wall hook complete for ETWC complete all as specified and directed.

S&F in repairs 75 mm x 32 mm dia chromium plated waste fitting special size suitable for stainless steel sinks including PVC flexible waste pipe of approved quality complete all as specified and directed.

S&F for Vitreous China Urinal, Half stall type, including automatic sensor, plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe including waste coupling, spreader and waste pipe all as complete and directed

S&F 600mmx450mm bevelled edges mirror consisting of 5.5mm thick commercial plywood and fixed to plug with chromium plated brass screwed and cup washer

S&F PVC connection 15mm bore length not less than 450 mm long with both ends PTMT nuts complete all as specified.

S&F 32mm bore Low density polyethylene (LDPE) (corrugated Waste pipe) pipes of pressure rating 6 kgf/sq. cm

S&F 20 mm dia gun metal ,globe or gate valves , with iron wheel head , screwed both ends for iron pipe

M&L taking up or down existing steel tubing and connections including cleaning for refixing or removal to stores complete all as specified and directed for 15mm bore

M&L taking up or down existing steel tubing and connections including cleaning for refixing or removal to stores complete all as specified and directed for 20mm bore

S&F 15mm bore GI water tubing medium grade galvanised with all fittings and fixed complete to walls and ceilling or laid in floor.

S&F 20mm bore GI water tubing medium grade galvanised with all fittings and fixed complete to walls and ceilling or laid in floor.

Taking up or down existing asbestos cement pressure pipe any class any dia ,(including all fitting ) including disconnecting pipes and fittings complete

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall

S&F 110mm bore PVC (SWR) bends with oval access door all as specified

S&F 110 mm PVC (SWR) bend any radius

S&F 110mm bore.PVC(SWR) junction single (single T) equal or unequal with access door

S&F in repair grating doom 100 mm dia CP

S&F towel rail cast copper alloy, chromium plated 600mm long with bracket in repair.

S&F 110 mm PVC (SWR) bend any radius

M&L 40mm thick PCC 1:2:4 type B1 using 20mm graded stone agg laid in panel finished even & smooth with using extra cement as in flooring complete all as specified and as directed.

S&F 100mm bore CI soil waste / vent pipe (spun type) in any length with or without ears with cement joint to wall with stack clamps out of 110mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing end of stays to wall or roof etc. and laid on PCC bed all as specified including black japan paints Make neco

S&F for Tufen Glass 10mm thick single piece with 1mm thick coloured or plain lamination, moulding fixed with all necessary items with fency type handles and double action hinge autoclosed after Push and Pull, finished for doors.

S & F fancy type viterous china counter top, wash hand basin oval shaped colours of size130 x 420 x420 mm with granite inserted in 25 mm thick mounted granite stone slab platform by cutting on oval shaped etc incl CP bottle trap completed all as specified and ditected. (Granite cuttings shall be measured and paind separately Make Jaquar ARS- WHT-5038,Cers, Parryware

S & F CP pillar cock central hole basin mixer without popup waste system with 450mm long braided hoses hot and cold water screwed down for iron pipe and fixed bore of pipe 15 mm Make- Jaguar cat no 23167B/Ess Ess

S & F 6 mm thick looking mirror fixed on 12 mm thick marine plywood with power coated aluminium frame alround the mirror incl mounted on wall size 1.5 x 60 complete all as specified and directed.

S & F long body bib cock with wall flange Make : jaquar cat no CON-107KN/ equivalent complete all specified and directed.

S & F CP cover glass shelf with bracket jaquar cat no 1173/ equivalent complete all specified and directed.

S & F CP toilet paper holder with flap Jaquar cat no AKP-35741P/ equivalent complete all as specified and directed.

S & F single piece WC size 690x345x850 trap distance vitreous china ware coloured EWC pedestal patern alongwith and incl premoulded 10 ltrs vitrreous china ware cistern complete all as specified and directed Make : Jaquar cat no SLS-WHT-0208/equivalent.

S & F CP single towel rail 60 cm long incl fittings complete all as specified and directed Make : Jaquar cat noAKP- 35711Por equivalent.

S & F CP towel ring square Cat No AKP-35721P of Jaguar or equivalent complete all as specified and directed.

S & F 450 mm long braided hoses with nut & rubber washer suitable for basin mixers Make Jaquar cat no 8038.

S & F CP towel rack size 24" Cat No 7781B of Jaquar or equivalent complete all as specified and directed.

S & F soap dish holder Cat No AQN_7731 of Jaquar or equivalent complete all as specified and directed.

S&F in repairs PVC toilet cabinet with mirror of size 20"X16" of selecred quality complete as specified and directed .

Dismantling water tanks and removing to store capacity exc 250 and not exc. 500 litres complete all as specified and directed.

S & F 500 ltrs capacity rotational moulded polythylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I

S&F 15mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed (Minimum weight 210 gms complete all as specified or as directed.

M&L for POP false ceilig includng GI framing, main member C shaped spacing not exc 1m c/c having weight 300 to 350 gm per rm and cross member U shaped spacing exc 500 mm c/c having weight 250 to 300 gm/RM and C section fixed on parameter wall with screws and rawl plug including hanging arrateement to RCC slab wth L shape member exc 105 m (wieght not less tha 120 gm/RM) and wire mesh of dia 0.50 to 0.56 mm weight not less than 350 gm/sqm fixed with steel screws of GI framing and applying two coat of luxury emulsion (Royal) complete all as specified and directed.

M&L for plaster of paris fancy moulding pattern in corners of ceiling in triangula shape of size 75 mm x 75 mm including finished upto the required mark complete all as specified and directed.

S&F in repair 10 ltrs capacity (PVC), valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.

S&F in repair vitreous china water closet (squatt pan) orissa pattern 580x 440 mm size pan white with front or back inlet with integral foot rests including provn of lime concrete bedding including connections to flushing cistern/pipe complete all as specified and directed.

S&F in repairs Vitreous china wash down water closet (pedestal pattern) white complete, including seat cover ,connection to drain pipe and to flushing pipe antisyphonage pipe etc complete all as specified and directed

S&F in repairs plastic water closet white seat cover closed pattern with flat bottom cover and mild steel chromium plated or aluminized hinging device complete all as specified and directed

S&F in repairs 6 x 6 inches ultra slim shower head with 12 inches arm of Chromium plated brass for fixing 15 mm pipe with bend of 45 degree with flange complete all as specified and directed.

S & F urinal valve auto closing system with built in control cock & wall flange valve 15 mm bore including urinal sperader of CP complete all as specified and directed Make jaquar or equivalent Cat no PRS-077.

S & F vitreous china urinal half stall type colours excluding flushing cistern flush pipe and waste pipe.

S&F in repairs chromium plated fancy type concealed stop cock for 15 mm bore pipe complete all as specified and directed.

M & L for construction of septic tank for 10 Users capacity using sub class B bricks old size, with and including necessary excavation earth work, brick work, concrete work, plastering, returning filling in soft/ loose soil and removal of surplus soil to a distance n exc 50 Mtrs etc complete all as shown in typical drawings No TD/217 sheet 1/7 to 7/7 complete all as spd and directed

M & L for construction of Soak well 1.80 mtrs dia and 3 mtrs effective depth with and including necessary excavation earth work, brick work, concrete work, plastering,filling with brick bats, PCC on top returning filling in soft/ loose soil and removal of surplus soil to a distance n exc 50 Mtrs etc complete all as shown in typical drawings No TD/309 sheet 1/4 to 4/4 complete all as spd and directed

Cutting into existing manholes for connecting new drains, making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 sectiion) in cement concrete 1:2:4 (type B1) smooth finished, and reforming benching as required of pipe 150mm dia complete

Taking down carefully aluminium point wiring any type including battens if any except for ceiling or where not feasible for light/ fan//bell/socket or power and including unscrewing from board, fitting and fixture such as switches,socket, ceiling rose,lamp holder,pendants, bracket and regulator etc and removing material from site including making good disturbed surface to match with the existing surface complete all as specified.

M&L point wiring with 1.5 Sqmm (FRLS) multi strand PVC insulated and unsheathed copper conductor cable concealed in PVC conduit 20 mm dia and including complete with 1.60mm thick pressed steel concealed galvanised terminal boxes and with top cover 3.0 mm thick ISI marked plastic laminated hylum sheet of reqd colour fixed with brass screws and cup washers, complete with all accessories and all as specified including 1.5 Sqmm (FRLS) PVC insulated unsheathed multistranded copper conductor to common earth and connected to earth dolly for following.

(a) One light / fan/ exhaust fan point controlled by one switch.

(b) One 5 pin 5 Amp switch socket out let point on an independent board.

(c) One 5 pin 5 Amp socket out let point controlled by one switch on same board.

All as per item 176 here in before but for one 15 Amp 6 Pin switch socket out let independent with 2.5 Sqmm FRLS (Nominal Area) PVC unsheathed copper conductor single core multistranded complete all as specified.

M&L for sub main wiring with three single core 6.0 Sqmm (FR) copper conductor PVC unsheathed cable medium grade including PVC conduit (appropriate size) concealed in wall for sub main connection including 4.0 Sqmm (FR) PVC insulated multistranded unsheathed copper conductor used as a earth wire to common earth and connection to earth dolly all as specified. ( Note :- Three runs of 6.0 sqmm (FR) and one run of 4 sqmm (FR) copper conductor shall be measured as one unit length.)

S&F switch piano flush type 5 Amp single pole one way.

S&F socket out let 2 in 1 flush type 5 Amp 5 Pin complete.

S&F socket out let 6 Pin 2 in 1, 5/15 Amp flush type 240 Volt complete.

S&F switch piano flush type 15 Amp single pole one way.

Taking down submain wiring and cables including all accessories complete all as specified and directed.

M&L for sub main wiring with two single core 6.0 Sqmm (FR) copper conductor PVC unsheathed cable medium grade including PVC conduit (appropriate size) concealed in wall for sub main connection including 4.0 Sqmm (FR) PVC insulated multistranded unsheathed copper conductor used as a earth wire to common earth and connection to earth dolly all as specified. ( Note :- Two runs of 6.0 sqmm (FR) and one run of 4 sqmm (FR) copper conductor shall be measured as one unit length.)

Supply and Fixing ceiling rose PVC / Poly carbonate, Isolated body, three terminal AC 230 volts complete all as specified and directed.

M & L for replacement of lamp holder, PVC / Poly carbonate, insulated body with back plate batten/angle type for batten fittings complete all as specified and & directed

Supply only LED lamp 12 Watt, 230 V , AC integrated circuit complete all as specified and directed. Model -LTHPLED22W/B22 of Make C&S or equivalent in Philips/ Havells.

S&F MCB SPN 63 Amp 240 volt complete all as specified and directed by the Engr-in-Charge.CAT No. CSMBS1B40/63 N of Make C&S or equivalent in Legrand/ Scheneider.

S&F MCB single pole 6 to 32 Amp 240 Volt 'B' curve 10 KA complete all as specified and directed by the Engr-in-Charge.CAT No. CSMBS1B6-32 of Make C&S or equivalent in Legrand/ Scheneider.

Supply and fix flush sheet metal enclosure SPN DB 8 way with double door IP-42 protection detachable gland plates, flush mounting for MCB fitted with bus bar , earth bar and neutral links Cat part No CSDBSPNSD04 ofof C&S or Equivalent Model in Legrand / Schenieder as Approved by GE complete including taking down old unsv all as specified and directed.

S&F CT-2 light decorative light including 7 Watt LED bulb all as psecified and directed by Engr-in-charge.

Supply and fixing surface mounting LED indoor decorative PVC extruded T-5 batten , 10 Watt, 2 feet including connection with 23/0.0076 three core PVC flexible cable etc complete all as specified and directed. Model : Cat No. LTTB4F20WLED P/W of Make-C&S, its equivalent model in Philips/CG/Bajaj

Supply and fixing surface mounting LED indoor decorative PVC extruded T-5 batten , 20 Watt, 4 feet including connection with 23/0.0076 three core PVC flexible cable etc complete all as specified and directed. Model : Cat No. LTTB4F20WLED P/W of Make-C&S, its equivalent model in Philips/CG/Bajaj

Remoove and refixing of LED tubelight 20 watt at site as per directed by Engr-in-Charge.

Material & Labour for earthing complete including taking out old unsv and replace with galvanised steel earth plate 600x600x 6mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 meters below normal ground level, surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate using 4 mm dia GI wire as earth wire electrode moulded and rivetted to earth plate at one end and connected to main switch/ control switches of buildings at another end, GI earth wire encased in and including 15 mm dia GI 'light grade' pipe from upper end of earth plate upto main switch board of building including 20 dia bore GI pipe 'light grade' as water pipe from earth chamber and including excavation and earth work, PCC 1:3:6 type C1 chamber and MS angle iron frame 40x40x3mm and RCC cover 40mm thick (1:2:4) type B1 using 20mm graded stone aggregate reinforced all as specified

Taking down, testing, repair and replacement of necessary item such as winding, bearing, bush, shaft, painting etc and refixing carefully serviceable ceiling fan of size 1200/1400 mm, 230V , AC type including provision of new single core twin twisted cable from ceiling rose to ceiling fan connector all as specified and directed by Engineer in Charge.

Taking down, testing, repair and replacement of necessary item such as winding, bearing, bush, shaft, painting etc and refixing carefully serviceable exhaust fan of size 450 mm, 230V , AC type including provision of new single core twin twisted cable from ceiling rose to ceiling fan connector all as specified and directed by Engineer in Charge.

S&F in replacement sheet metal enclosure DB's 415 Volts, IP-42, vertical suitable for mounting MCCB's, TPN, 4 way with 200 Amps rated copper bus bar complete all as directed by Engineer-in-charge.

Supply and Fixing in repairs MCCB TPN 100 Amps, 415V, 16kA ,Thermal Magnetic Release

Supply and Laying cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 Sqmm 3.5 core as required at site.

Excavation in trenches not exceeding 1.5 mtrs wide and not exceeding 1.5 mtrs in depth for laying of cables including getting out in any kind of soil complete all as specified and directed.

Returning filling in including spreading, leveling ,and well ramming, in layers not exceeding 25 cm each layer of any kind of soil.

Removing surplus excavated material from site not exceeding 50 mtrs from starting point and depositing where directed at level not exceeding 1.5 mtr above the starting point.

Sand cushioning for cables all as specified and directed . Note:-Punned sand layers meassured only.

Material and labour for old size brick well burnt, laid flat, for cable protection complete all as specified and directed.

Supply only LED lamp 12 Watt, 230 V , AC integrated circuit complete all as specified and directed. Model -LTHPLED22W/B22 of Make C&S or equivalent in Philips/ Havells.

Supply & Fixing security light fitting, LED type, 25 Watt, 6000 K, pressure die cast housing with prismatic polycarbonate diffuser & indvl LEDs as light source with integrated electronic driver complete with M&L GI pipe mounting bracket of size 25/32 mm dia and 1.20 m long fixed to wall with and including nut, bolts and GI clamps of size 50 x 6 mm as required including two coats of synthetic enameled paint over a coat of primer and making connection with three core 23/.0076 rubber insulated copper cable from ceiling rose to connector of street light complete all as specified and directed. Model-BCLST 20W LED of Make- BAJAJ or eqvlt in Philips/ Havells.

Suuply, fixing and testing exhaust fan of size 300 mm , 230V AC type of make- havells/Crompton/Surya complete all as specified and directed by Engr-in-Charge

Suuply, fixing and testing ceiling fan of size 1200 mm , 230V AC type of make- havells/Crompton/Surya complete all as specified and directed by Engr-in-Charge

Suuply, fixing and testing exhaust fan of size 300 mm , 230V AC type of make- havells/Crompton/Surya complete all as specified and directed by Engr-in-Charge

S&F 2'x 2' LED recess/ surface mounted fitting 36 Watt, 230V, with integrated electronic driver high transcluent frosted diffuser, connector block, etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed.

Supply, installation,commissioning and testing split type Air Conditioner all weather type(Hot and Cold) with CFC/HCFC free, eco-friendly refrigerant gas and minimum 3 star rating with EER 3.2 with indoor & out door unit complete with cordless remote control unit and good quality filter for better indoor air quality of capacity 2.0 Ton complete all as specified and as directed Make : Carrier,Bluestar,LG,Samsung,Hitachi,Daikin NOTE:- (i) Cost of copper piping including in quoted rate. (ii). Cost of power cable between indoor and outdoor unit including in quoted rate.

Supply only voltage stabiliser for automatic operation, single phase naturally air cooled indoor type and designed for input variation between 170 volt to 250 V with output voltage stablized at 230V accuracy of ±2.5% and of capacity 5 KVA all as specified and directed (Make : BLUE BIRD / SINETRAC/V Guard)

Supply and fix MCB Sheet Metal enclosure box with single pole and neutral with a two pin and earth plug and socket complete with and including one MCB single pole 25 amps, 240 volts. Make: Havells/Indoasian/HPL/L&T

Supply and Fix water heater storage type, electric, capacity 25 litr.BEE 5 star

M&L for sub main wiring with two single core 6.0 Sqmm (FR) copper conductor PVC unsheathed cable medium grade including PVC conduit (appropriate size) concealed in wall for sub main connection including 2.5 Sqmm (FR) PVC insulated multistranded unsheathed copper conductor used as a earth wire to common earth and connection to earth dolly all as specified. ( Note :- Two runs of 4.0 sqmm (FR) and one run of 2.5 sqmm (FR) copper conductor shall be measured as one unit length.)

S&F MCB SPN 32 Amp 240 volt complete all as specified and directed by the Engr-in-Charge.CAT No. CSMBS1B40/63 N of Make C&S or equivalent in Legrand/ Scheneider.

Supply and fix flush sheet metal enclosure SPN DB 4 way with double door IP-42 protection detachable gland plates, flush mounting for MCB fitted with bus bar , earth bar and neutral links Cat part No CSDBSPNSD04 ofof C&S or Equivalent Model in Legrand / Schenieder as Approved by GE complete including taking down old unsv all as specified and directed.

Supply and fixing 1100 volt grade heavy duty cable PVC insulated stranded aluminium conductor served with inner sheathing of PVC tape and overall PVC sheathed in service connectious suspended by insulating hangers not more than 1 meter apart including 4 mm dia suspension wire, one twin core cable flat of size 6 sqmm all as specified.

Supply and fixing 1100 volt grade heavy duty cable PVC insulated stranded aluminium conductor served with inner sheathing of PVC tape and overall PVC sheathed in service connectious suspended by insulating hangers not more than 1 meter apart including 4 mm dia suspension wire, one twin core cable flat of size 10 sqmm all as specified.

S&F MCB SPN 40 Amp 240 volt complete all as specified and directed by the Engr-in-Charge.CAT No. CSMBS1B40/63 N of Make C&S or equivalent in Legrand/ Scheneider.

A K builders

Mohit Enterprises

M/S Alam Construction Co

Shikhar ji Enterprises