Construction of Govt. Senior Secondary School Building at Rissa in Tehsil Sarkaghat Distt. Mandi (HP)

Amount

Cutting in earth work in all kinds of soil such as pick work, jumper work, soft and hard rock including chiseling wedging out of rock (where blasting is prohibited ) if required and saturated soil and their intermediate classification of soil setting out true to the required line, grades, width cutting and trimming of side slopes and level as shown in the drawings and as directed by the Engineer-In-Charge at site and sorting out useful material and stacking the same in all leads and lifts on acquired width of the road and transportation of material for filling in road ways, camber, embankment, grade improvement and disposal of all surplus material in all leads and lifts to the approved dumping site through all modes of transportation including head load or animal transport or mechanical means alongwith its leveling and fine dressing complete in all height and depth.The work shall be carried out as per technical specification clause 1603.1 and 1603.2 and the work by all means (if any required) recovery for useful stone of 300.64 cum @ 300/- cum amounting to Rs.90,192/- only shall be done on prorate basis for the quantity of cutting in earth work effected. Any loss to the public and private property during the course of execution shall be the absolute responsibility of the contractor which shall have to be duly compensated by him in all respect including all leads and lifts of material and as per direction of Engineer-in-charge.

Excavation in foundations, trenches etcetera in all classification of soil dry in or saturated conditions upto any depth and lift includung pumping and bailing out water where required including stacking the serviceable and unserviceable materials seperately as directed and then returning the stacked soil in fifteen centimeters layers when required into plinth and sides of foundation etcectra consolidating each deposited layer by ramming and watering and then disposing of all surplus un-serviceable excavated earth within all leads and lifts as directed by the Engineer-in- Charge including carriage of materials in all leads and lifts disposed materials to be neatly levelled.

Excavation in drain and channels etc. in all kinds of classification of soil Viz,such as pick work, Jumper work, blasting work and hard blasting work saturated soil including dressing of side and bed disposing of excavated earth upto any lead and upto any lift as per the diraction of the Engineer-In-Charge disposed earth to be levelled and eatly dressed within all leads and lifts.

Filling in plinth with approved sand under floors and plinth in all heights including watering ramming, consolidating and dressing complete including entire carriage of materials in all leads and lifts as per the direction Engineer-in-Charge.

Providing from work with mild steel plates 3.15mm (Three point one five millimeter) thick welded with angle iron in frames 30x30x5mm(Thirty into thirty into five millimeter ) so as to give a fair finish including centering, shuttering, strutting , propping and centring with wooden battens and ballies in all heights below supporting floor to celling and removal of the same for insitu-reinforced concrete and plain concrete work, including entire carriage of materials in all leads and lifts as per the direction of Engineer-in-Charge .

In foundation,footings bases of columns and mass concrete including plinth beam

Flat surfaces such as soffits of the suspended floors roofs, landing,shelves and the like etcetra in all thickness in any floor level.

Vertical surfaces such as walls and thickness partitions and the like including attached pillasters, buttresses, plinth and string courses and the like.

Columns,pillars,posts and struts square rectangular or polygonal in plan in any floor.

Stair case with slooping or stepped soffit excluding landing.

Beams, cantilever, girder and lintel, sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels in any depth in all heights from floor.

Edges of slab and breaks in floors and walls, any thickness/heights in all floor level

Providing from work of balcony with timber planking so as to give a rough finish including centring, shuttering etcetra in cornices and mouldings including entire carriage of materials in all leads and lifts as per direction of Engineer-in-Charge.

Providing and laying cement concrete 1:6:12 (One cement :six sand: twelve graded crushed stone aggregate) 40mm(Forty millimeters) nominal size ,mixed and vibrated mechanically and curing complete excluding cost of form work in foundation and plinth including entire carriage of materials in all leads and lifts as per direction of Engineer-in-Charge.

Providing and laying cement concrete 1:4:8 (One cement: four sand: eight graded crushed stone aggregate) 40mm (Forty millimeters) nominal size and curing complete excluding cost of form work in foundation and plinth including entire carriage of materials in all leads and lifts as per the direction of Engineer-in-Charge.

Providing and laying cement concrete 1:5:10 (One cement: five sand: ten graded crushed stone aggregate) 40mm (Forty millimeters) nominal size and curing complete excluding cost of form work in foundation and plinth including entire carriage of materials in all leads and lifts as per the direction of Engineer-in-Charge.

Providing and laying cement concrete 1:2:4 (one cement: two sand: four graded crushed stone aggregate) 20mm (Twenty milimetre) nominal size crushed stone aggregate mechanically mixed and vibrated and curing complete excluding cost of form work and reinforcement for reinforced cement concrete work including carriage of materials with in all leads and lifts and other incidentals.

Suspened floors, roofs, landings, shelves and there support balconies, beams, girders, bressumers and cantilevers upto all floor level

Wall any thicknessbut not less than 0.10 ( zero point ten ) metre thickness including attached pilasters, buttress, plinth nad string courses etc. from top and foundation upto all floor level

Providing weep holes in brick masonry / Stone masonry / plain/reinforced concrete in retaining walls, breast walls and the like with 100mm ( One hundred ) dia PVC pipe extending through the full width of the structure with slope of 1(one) vertical : 20 (twenty) horizontal towards drawing face complete as per drawing and technical specification clauses 614,709,1204.3.7 in all leads and lifts and carriage of material by all modes of transportation as per the direction of Engineer- in-chrage.

Providing and laying cement concrete 1:1.5.:3 (One cement :one point five sand :three graded stone aggregate 20mm (twenty millimetre) nominal size and curing complete excluding cost of form work and reinforcement for reinforced concrete work including carriage of materials with in all leads and lifts and other incidentals.

Foundation footing bases of columns and the like in mass concrete.

Suspened floors, roofs, landings, shelves and there support balconies, beams, girders, bressumers and cantilevers upto all floor level

Stair case (except spiral stair case) excluding landing but including preparing of the surface and finishing of nosing upto all floor level

In columns pillars, posts and struts upto all floor level

Providing and laying tor steel reinforcement for reinforced cement concrete work including bending , binding and placing in position complete in all heights including cost of binding wire and including entire carriage of materials in all leads and lifts as per the direction of Engineer-in-Charge.

Providing and laying upto first floor level reinforced cement concrete 1:2:4 (one cement : two sand : four graded stone aggregate 20mm (twenty millimetre) nominal size to give smooth and even surface including centring and shuttering etc. but excluding cost of reinforcement in mouldings as in cornices windows sill etc. not exceeding 15cm (fifteen centimetre) in girth including entire carriage of materials in all leads and lifts as per the direction of Engineer-in-Charge.

Applying cement slurry on reinforcement for reinforced cement concrete slab or cement concrete work using 2.75 kg (two point seven five) of cement per square metre of floor area before laying cement concrete flooring including roughening, cleaning of the concrete surfaces complete including entire carriage of materials in all leads and lifts as per the direction of Engineer-in-Charge.

Brick work using second class common burnt clay building bricks in super structure above plinth level upto all floor level in cement mortar 1:6 (one cement : six sand) upto all floor level including curing complete and carriage of material within all leads, lifts and other incidentals.

Half brick masonry using second class common burnt clay building bricks in super structure in cement mortar 1:4 (one cement : four sand) upto all floor level including curing complete and carriage of material within all leads, lifts and other incidentals.

Squared rubble masonry coursed with hard stone of approved quality in foundation and plinth including raking out joints in cement mortar 1:6 (one cement : Six sand) including carriage of materials within all leads, lifts and other incidentials .

Squared rubble masonry coursed with hard stone of approved quality in foundation and plinth including raking out joints in cement mortar 1:5 (one cement : five sand) including carriage of materials within all leads, lifts and other incidentials .

Squared rubble masonry coursed with hard stone of approved quality in foundation and plinth in retaining wall / breast walls including raking out joints in cement mortar 1:6 (one cement : Six sand) including carriage of materials within all leads, lifts and other incidentials .

Stone filling tightly dry hand packed under floor as per specification or as per directed by the Engineer-In Charge with in all leads,lifts and other incidentals.

Construction of dry rubble masonry in breast wall and retaining walls revetment walls and parapets etc. including carriage of materials within all leads, lifts and other incidentials .

Supply and stacking at site crushed stone aggregate 40mm (forty millimetre) nominal size including carriage of materials within all leads, lifts and other incidentials .

Providing and fixing 40mm (forty milimeters) thick second class deodar wood panelled glazed or panelled and glazed shutters for doors windows and clerestory windows including black enamelled iron butt hinges with necessary screw complete including entire carriage of materials in all leads and lifts as per the direction of Engineer- in- charge.

Providing and fixing 300x16mm( three hundred into sixteen millimetre) anodized aluminium sliding door bolts anodized colour and shade with bolts and nuts screws etc complete including carriage of material within all leads and lifts and other incidentials.size including carriage of materials within all leads and lifts and other incidentials .

Providing and fixing 200 x10mm ( two hundred into ten milimetre ) size aluminium tower bolts (barrel type) anodized transparent or dyed to required shade and colour with screws etc complete including carriage of material within all leads, lifts and other incidentals.

Providing and fixing 100mm (one hundred millimetre) size aluminium handles anodized transparent or dyed to required colour of shade with necessary screws etc. complete including carriage of material within all leads and lifts and other incidentals.

Providing and fixing 100mm (one hundred milimetre ) bright finished brass floor door stopper with rubber cushion screws etc. to suit shutter thickness complete including carriage of materials within all leads and lifts and other incidentals charges.

Providing and fixing Mild Steel grills of required pattern on wooden/steel frames of windows etc with mild steel flats square or round bars with round headed bolts and nuts or by screws welding plain grill including entire carriage of materials in all leads and lifts as per the direction of Engineer- in-Charge.

Providing and fixing 6mm (six millimetre) thick plain asbestos cement sheet ceiling of approved quality with butt jointing and wood screws(frame work and fillets to be measured and paid for separately) including entire carriage of materials in all leads and lifts as per the direction of Engineer- in-Charge.

Providing 2nd class kail wood work in frames of false celling partitions etc.sawn and put-up in position including entire carriage of materials in all leads and lifts as per the direction of Engineer- in-Charge.

Providing and fixing 19mm (nineteen millimetre) thick water proof commercial board in shelves / box for cup board with butt joints & fixing with nails & screws etc.including entire carriage of materials in all leads and lifts as per the direction of Engineer- in-Charge.

Providing and fixing 19mm (nineteen millimeters) thick commercial board water proof shutter for cup board including fixing with nickel plated piano hinges with screws etcectra complete including entire carriage of materials in all leads,lifts and heights as per the direction of the Engineer -in- charge.

Providing and fixing 1.00mm (one point zero) thick coloured or plain lamination sheet (sunmica) on boards/ply wood sheets with approved adhesive and nails etc complete including entire carriage of materials in all leads,lifts and heights as per the direction of the Engineer -in- charge.

40mm (forty millimeters )thick cement concrete flooring 1:2:4 (One cement:two sand :four graded crushed stone aggregate ) 20mm (Twenty millimeters)nominal size laid in one layer finshed with a floating coat of neat cement,curing complete including entire carriage of materials in all leads and lifts as per the direction of Engineer-in Charge.

15mm (fifteen milimetre) thick cement plaster skirting upto 30 cm (thirty centimetre) hight with cement morter 1:3 (one cement : three sand) finished with a floating coat of neat cement including rounding of junction with floor including entire carriage of materials in all leads and lifts as per the direction of Engineer-in Charge.

Providing and fixing glass strips 40mm (forty millimetre) wide and 4mm (four millimetre) thick in joints of terrazzo floors including entire carriage of materials in all leads and lifts as per the direction of Engineer-in Charge.

Providing and fixing 0.60mm (zero point sixty milimetre) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified poliyster (RNP) organic coating of 20 (twenty) microns over 5 (five) microns primer coating to black coat of polyster of 5 (five) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six milimetre) with prepainted G.I limpet and bitumen washers complete with all accesories as required as per direction of Engineer-in-charge with in all leads and lifts and other incidentals.

Providing and fixing ridges or hips overall 60 cm (sixty centimetre with 0.60mm (zero decimal six zero millimetre ) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 (twenty) micron over 5 (five) micron primer coating to black coat of polyster of 5 (five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six millimetre) diametre with prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction and entire satisfaction of the Engineer-in-charge with in all leads and lifts and other incidentals.

Providing and fixing 100mm ( one hundred milimetre) dia pipes on wall face PVC (D-Plast) rain water pipes of working pressure not less than 4.5 kg/sq. mtr. ( four point five kilogramme per square metre ) including filling the joints with approved adhesive complete including carriage of material within all leads, lifts and other incidentals.

Providing and fixing PVC plain bend 100mm ( one hundred milimetre) dia on wall faces PVC (D-Plast) accessories for rain water pipes including filling the joints with approved adhesive complete including carriage of material within all leads, lifts and other incidentals.

Providing and fixing mild steel BP sheet 1.66mm to 2mm (one point six six millimetre to two millimetre) thick in eaves board, facia, soffits, ceiling including cutting, fixing and welding to to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured and paid for separately) including carriage of material within all leads, lifts and other incidentals.

Providing and fixing 0.63mm(Zero point sixty three millimeter) thick G.I. sheet 15cm (Fifteen centimeter) wide 45cm(Forty five centimeters) over all semicircular plain G.I Sheet gutter with iron brackets 40x3 mm (Forty into three millimeter) size bolts and nuts and washers etc. including making necessary connection with rain water pipe complete including entire carriage of materials in all leads and lifts as per the direction of Engineer-in-Charge.

Steel work welded in built up sections,trusses and framed work,including cutting, hoisting, fixing in position and applying a priming coat of red lead paint In beams joists channels, angles, tee, flats with connection plates or angle cleats as in main and cross beems, hip and jack rafters, purlins connected to common rafters and the like including entire carriage of materials in all leads and lifts as per the direction of Engineer-in-Charge.

Providing and fixing steel glazed frame shutter of angle iron 30x30x4mm (thirty into thirty into four millimetre) with 4 mm (four millimetre) thick glass panes putty for doors, windows and clerestory windows in required shape and section with fitting and necessary steel screws including and applying a priming coat of red led paint complete as per approved design including entire carriage of materials in all leads and lifts as per the direction of Engineer-in-Charge.

Providing and fixing pannelled and glazed shutters of z-section with 4 mm (four millimetre) thick glass panes putty for doors, windows and clerestory windows required shape and section with fitting and necessary etc. necessary screws including applying a priming coat of red led paint complete as per approved design including entire carriage of materials in all leads and lifts as per the direction of Engineer-in-Charge.

Providing and fixing moulded hand rail of mild steel hollow pipe 50mm (fifty millimeters) dia welded in straight lenght over mild steel flat at top of vertical balusters including one coat of red oxide priming coat complete (mild steel flat & balusters of railings shall be mesaured & paid separtely including entire carriage of materials in all leads and lifts as per the direction of Engineer-in- Charge.

Providing and fixing angle iron door,window,clerestory window frame manufactured from mild steel angle iron section of 50X50X6mm (fifty into fifty into six millimetre,thickness including hinges jamb,lock jamb,beed and if required angle thrashold ofmild steel angle 50X25 mm (fifty into twenty five millimetre) welded or rigidly fixed by mechanical means,lugs with split end tails to each jamb including steel butt hinges 2.5 mm (two point five millimetre) thick with provision for locking arrangement and shock observer as specified and applying a coat of approved steel primer after preteatment of the surface including entire carriage of materials in all leads and lifts as per the direction of Engineer-in- Charge.

Painting two costs (excluding priming coat) on new steel and other metal surfaces with enamel paint brushing to give an even shade including cleaning the surface of all dirt,dust and other foregin matters with enamel paint other than white including carriage of material within all leads, lifts and other incidentals.

Applying priming coat over new steel and other metal surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter, and seoured with wire brushes fine steel wool scrapers and sand paper complete with ready mixed priming paint brushing red lead,red oxide/zinc oxide/zinc oxide chrome including carriage of materials within all leads, lifts and other incidentals.

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter, sand papering and knotting with ready mixed paint brushing wood primer pink including carriage of material within all leads, lifts and other incidentals.

Painting two coats (excluding priming coat) on new wood and wood based surfaces,with readymixed paint, brushing to give an even shade including cleaning of all dirt, dust and other foreign matter sand papering and stopping with readymixed paint other than white including carriage of material within all leads, lifts and other incidentals.

6mm (six millimeter) cement plaster to ceiling /slopping surface in cement mortar 1:4 (one cement : four sand) in all floors level complete or as directed by the Engineer-in-Charge including carriage of materials within all leads and lifts and other incidentals .

15mm (Fifteen millimeters) thick cement plaster in single coat on fair side of brick concrete/ stone walls for interior plastering upto all floor level including arrises internal rounded angles, chamfers and / or rounded angles not exceeding 80mm (Eighty millimeters) in girth and finished even and smooth in cement mortar 1:6 ( One cement : six sand) and curing complete including entire carriage of material in all leads and lifts as per of the direction Engineer- in- Charge.

15mm (fifteen millimeters) thick cement plaster in single coat on rough side of brick concrete/stone walls for interior plastering upto all floor level including arrises internal rounded angles, chamfers and / or rounded angles not exceeding 80mm (Eighty millimeters) in girth and finished even and smooth in cement mortar 1:3 ( One cement : three sand) and curing complete including entire carriage of material in all leads and lifts as per of the direction Engineer- in- Charge.

15mm (fifteen millimeters) thick cement plaster in single coat on rough side of brick concrete/stone walls for interior plastering upto all floor level including arrises internal rounded angles, chamfers and / or rounded angles not exceeding 80mm (Eighty millimeters) in girth and finished even and smooth in cement mortar 1:6 ( One cement : six sand) and curing complete including entire carriage of material in all leads and lifts as per of the direction Engineer- in- Charge.

Distempering two coats with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surface to give an even shade over and including a priming coat distemper primer of approved brand and manufracture after thoroughly brushing the surface free from mortar dropping and other foreign matter and also including preparing the surface even and sand papered smooth complete including entire carriage of materials in all leads and lifts as per the direction of Engineer -in-Charge.

White washing with lime on decorated wall surfaces (two coats)to give an even shade including thoroughly brooming the surface to remove all dirt dust mortar dirt and other foregien matter including entire carriage of materials in all leads and lifts as per the direction of Engineer -in-Charge.

Provding plinth protection 50mm (Fifty millimeters) thick in cement concrete 1:3:6(One cement:three sand:Six graded/crushed stone aggregate)20mm(Twenty millimeters) nominal size including finishing the top surface complete including entire carriage of materials in all leads and lifts as per the diretion of Engineer- in-Charge.

Provding under layer for plinth protection of 75mm (Seventy five millimeters) thick(unconsolidated )bed dry brick/aggregate 40mm(Forty millimeters) nominal size well rammed and consolidated and grouted with fine sand including preparation of ground complete including entire carriage of materials in all leads and lifts as per the diretion of Engineer- in-Charge.

Constructing course rubble hammer dressed U-Shape open surface drain with side wall 15x22cm (fifteen into twenty two centimetre) in cement mortar 1:6 (one cement : six sand) and inside plastering with cement plaster 1:3 (one cement : three sand) including earth work and laying 10cm (ten centimetre) thick cement concrete 1:5:10 (one cement : five sand : ten graded crushed stone aggregate 40mm (forty millimetre) nominal size) and 7.5cm (seven point five centimetre) cement concrete 1:2:4 (one cement : two sand : four graded crushed stone aggregate twenty millimetre) nominal size) and finished with a floating coat of neat cement complete as per standard drawing/design including carriage of material within all leads, lifts and other incidentals.

WATER SUPPLY AND SAINTARY INSTALLATION Providing and fixing to wall, ceiling and floor galvanized mild steel tubes (medium grade) tube fitting and clamps including making good the walls, ceiling and floor complete in all respect including carriage of materials within all leads and lifts and other incidentials.

15mm (fifteen millimeter nominal size)

20mm ( twenty millimeter nominal size)

Providing and fixing Anglo Indian universal closet viterious china wash down water closet pan ( European type W.C pan ) with integral P or S strap including jointing the trap with soil pipe in cement mortar 1:1 ( one cement:one sand ) ( seat and cover to be measured and paid for separately including carriage of materials within all leads and lifts and other incidentials.

Providing and fixing vitreous Orissa Pattern china wash down, water closet squatting pan (Indian type W.C. pan) size 580mm (five hundred eighty milimetre) (earth work, bed concrete, foot rest and trap to be measured and paid for separately) including entire carriage of materials in all leads and lifts as per the diretion of Engineer- in-Charge.

Providing and fixing 10/12.50/15.00 (Ten oblique twelve point five zero oblique fifteen point zero ) liters vitreous china low level flushing cistern with a pair of cast iron or mild steel brackets complete with fittings such as lead valve less spunhon 15mm (Fifteen millimeters) dia size brass ball valve with polythene float Choromium plated brass handle unions and coupling for connection with inlet,outlet and overflow pipes 40mm(Forty millimeters) dia Choromium plated flush bend including cuttings holes in walls and making good the same and connecting the flush bend with cistern and closet(overflow pipe to be measured for separately) complete including entire carriage of materials in all leads and lifts as per the direction of Engineer-in-Charge.

Providing and fixing in position with clamps etc. 32mm (thirty two milimetre) nominal internal diametre galvanised steel tube flush pipe for high level flushing cistern including connecting the flush pipe with cistern and closet making good the walls and floors including entire carriage of materials in all leads and lifts as per the diretion of Engineer- in-Charge.

Providing and fixing G.I. inlet connection for flush pipe with W.C pan including carriage of materials within all leads and lifts and other incidentials.

Providing and fixing Solid type white plastic seat and cover for wash down water closet with C.P. brass hinges and rubber buffers including carriage of materials within all leads and lifts and other incidentials.

Providing and fixing vitreous China wash basin with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings Flat back 550mm x 400mm ( five hundred fifty into four hundred milimetre ) including entire carriage of materials in all leads and lifts as per the diretion of Engineer- in-Charge.

Providing and fixing vitreous China padedstal for wash basin complete recessed at the back for the reception of pipes and fittings including entire carriage of materials in all leads and lifts as per the diretion of Engineer- in-Charge.

Providing and fixing chromium plated brass chain 50cm (fifty centimetre) long and rubber plug 32mm (thirty two milimetre) dia size for sink or wash basin including carriage of materials within all leads and lifts and other incidentials.

Providing and fixing 32mm (thirty two milimetre) dia rubber plug for sink/wash basin including carriage of materials within all leads and lifts and other incidentials.

Providing and fixing 32mm (thirty two milimetre) dia chromium plated brass waste for wash basin or sink including carriage of materials within all leads and lifts and other incidentials.

Providing and fixing 32mm (thirty two milimetre) dia M.I. union for wash basin or sink including carriage of materials within all leads and lifts and other incidentials.

Providing and fixing 110mm x 75mm ( one hundred ten milimetre into seventy five milimetre ) PVC floor trap ISI marked self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floor etc. complete including carriage of materials within all leads and lifts and other incidentials.

Providing and fixing 110mm ( one hundred ten milimetre ) dia PVC plain bend ISI marked including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts and other incidentials.

Providing and fixing 600x450mm (Six hundred into four hundred fifty millimeters) beveled edge mirror of superior glass mounted on 6mm(Six millimeters) thick A.C. sheet or plywood sheet and fixed to wooden plug Choromium plated brass and washers complete including carriage of materials within all leads and lifts and other incidentials.

Providing and fixing Choromium plated brass towel rail complete with Choromium plated brass bracket fixed to wooden plugs with Choromium plated brass 750 x 20mm ( seven hundred fifty into twenty milimetre ) including carriage of materials within all leads and lifts and other incidentials.

Providing and fixing 600mm X 120mm ( six hundred milimetre into one hundred twenty milimetre ) glass shelf with Choromium plated brass bracket and guard rail complete fixed to wooden plug with CP brass screws including carriage of materials within all leads and lifts and other incidentials.

Providing and fixing toilet paper holder Choromium plated Brass including carriage of materials within all leads and lifts and other incidentials.

Providing and fixing Choromium plated brass soap dish with Choromium plated brass brakckets fixed to wooden cleats with Choromium plated brass screws including carriage of materials within all leads and lifts and other incidentials.

Providing and fixing Choromium plated Brass pillar tap with capstan head15mm ( fifteen milimetre ) dia including carriage of materials within all leads and lifts and other incidentials.

Providing and fixing 15mm ( fifteen milimetre ) mixer for kitchen sink with top/bottom swinging spout including carriage of materials within all leads and lifts and other incidentials.

Providing and fixing Choromium plated angle valve 15mm ( fifteen milimetre ) nominal dia without nut and pipes complete including carriage of materials within all leads and lifts and other incidentials.

Providing and fixing PVC connections pipe with brass unions 300/450mm ( three hundred obluique four hundered fifty milimetre ) lenght 15mm ( Fifteen milimetres ) nominal bore complete upto all floor level including carriage of materials within all leads and lifts and other incidentials.

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts and other incidentials.

110mm ( one hundred ten milimetre ) dia.

75mm ( seventy five milimetre ) dia

Providing and fixing 110mm (one hundred ten millimetre ) dia PVC single equal branch with oval access door, ISI marked insertion rubber washer 3 mm ( three milimetre ) thick bolts and nuts complete including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts and other incidentials.

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm(four hundred thirty into two hundred sixty into three hundred fifty millimetre) and 340x430x265mm(three hundred forty into four hundred thirty into two hundred sixty five millimetre) sizes respectively with automatic flushing cistern with fitting R.S. or C.I. brackets standard size galvanised steel flush pipe and spreaders with brass unions and G.I. clamps copmlete including painting of cistern and fittings, cutting and making good the walls, floors where required including carriage of materials within all leads and lifts and other incidentials.

Range of two urinal basins with 10 (ten) litres C.I. automatic flushing cistren

Range of three urinal basins with 10 (ten) litres C.I. automatic flushing cistren

Providing and fixing PVC storage tank 1000 liters( one thousand Litre net capacity) complete with 40mm (forty milimetre) nominal bore galvanised mild steel over flow tube with fitting and mosquito proof coupling of approved municipal design 15mm ( Fifteen milimetres ) nominal size ball valve and mosquito proof coupling PVC cover with locking arrangement including providing pade of size as required for inlet and outlet tube complete including hosting upto all heights above ground level 1000 litre( one thousand Litre) net capacity including carriage of materials within all leads and lifts and other incidentials.

Providing and fixing 110mm ( one hundred ten milimetre ) dia PVC collars ISI marked i/c fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts and other incidentials.

Providing and fixing 110mm ( one hundred ten milimetre ) dia PVC clamps ISI marked of approved design with steel screws and rawl plugs etc. complete including carriage of materials within all leads and lifts and other incidentials.

Providing and fixing 110mm ( one hundred ten milimetre ) dia PVC cowl ISI marked of approved design including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts and other incidentials.

Providing 200mm (two hundred millimetre) wide cast iron rungs with channel or ribbed non slip sufface including fixing in man hole with 200mmx100mm (two hundred millimetre into one hundred millimetre) cement concrete 1:3:6 (one cement : three sand : six graded stone aggregate 20mm (twenty millimetre) nominal size including carriage of materials within all leads and lifts and other incidentials.

Supplying cast iron cover with frame for man holes for frame of 500 (five hundred) internal dia metre cast iron Cover (medium duty) the weight of cover to be not less than 58 kg(fifty eight Kilogramme) including carriage of materials within all leads and lifts and other incidentials.

Supplying cast iron cover with frame for man holes for frame of 500 (five hundred) internal dia metre cast iron Cover (medium duty) the weight of cover to be not less than 116 kg (one hundred sixteen Kilogramme) including carriage of materials within all leads and lifts and other incidentials.

Providing and fixing grill jali panel on chamber including carriage of materials within all leads and lifts and other incidentials.

Kumar Associates