Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.6 LAccepted-AOC | L1 | Accepted-AOC Lowest bidder |
| Sl No | Description | Qty | Unit | FRANCIS PINHERO L1 |
|---|---|---|---|---|
| 1.00Repairs of pumps and vacuum pumps at Various LIS | ||||
| 1.00 | OD217285/2023-2024:Supply installation ,Testing and commissioning of vacuum motor pump set model DV 40 with Del 40 mm X Suc 40 mm coupled to 3.7KW/5 HP,1450 RPM squirrel cage induction meter suitable for 3phase voltage supply kirloskar or equivalent make | 1 | each | 1,48,353 ₹1,48,353 Lowest |
| 1.00 | OD250810/2023-2024:Separate the vacuum pump ( up to 10 HP) from motor/ suction pipe and conduct the following works 1. Remove the vacuum pump find the damages 2. Check the pump and take it into lathe workshop for necessary works including impeller, shaft, plate etc repair 3.Check the bearing condition and overhaul it, change it if necessary 4. Check the vacuum line and Refit the pump with motor and create sufficient vacuum as per the direction of department staff | 7 | job | 5,830 ₹40,810 Lowest |
| 1.00 | OD251644/2023-2024:Supply Installation ,Testing and commissioning including casting and machining charge of Gun metal impeller for 75 HP to 90HP motor pump sets including dismantling the existing pump set checking the pump shaft and taking into the lathe workshop for necessary works checking the bearing condition fitting the impeller to the pump with all the packing (rubber and gland packing with required nuts and bots and refill the pump oil and test run the motor pump set on full load condition | 120 | kg | 3,200 ₹3,84,000 Lowest |
| 1.00 | OD253233/2023-2024:Charges for providing Vacuum pipe line for Vacuum pump sets by providing 25 mm GI Pipe , GI Bend G I Coupling , Hose collar, Hose coupling , Half turn valve , Flexible hose , necessary bolts and nuts etc complete with all industrial charges and labour charges | 4 | job | 2,115 ₹8,460 Lowest |
Tender Value
₹4.2 L
EMD Value
₹10,580
Closing Date
17 Jun 2026, 3:00 pmClosed
Assistant Executive Engineer
O/o Assistant Executive Engineer Electrical Irrigation Sub Division Aluva
Urgent repairs of defective and perished pumps and vacuum pumps, and replace the impellers at various LIS under Electrical wing Irrigation section Kalady- General Electrical Work
2024_Irrig_688718_20
PWD/BLDG/5476/2024-2025
Open Tender
Electrical Works
Item Rate
180 days
Aluva
Please refer Tender documents.
11 documents required · 11 mandatory
₹935
₹10,580
29 Sept 2026
9 Jun 2026
19 Jun 2026
9 Jun 2026
17 Jun 2026
9 Jun 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Repairs of pumps and vacuum pumps at Various LIS | |||||
| 1.001 | OD217285/2023-2024:Supply installation ,Testing and commissioning of vacuum motor pump set model DV 40 with Del 40 mm X Suc 40 mm coupled to 3.7KW/5 HP,1450 RPM squirrel cage induction meter suitable for 3phase voltage supply kirloskar or equivalent make | - | each | - | - |
| 1.002 | OD250810/2023-2024:Separate the vacuum pump ( up to 10 HP) from motor/ suction pipe and conduct the following works 1. Remove the vacuum pump find the damages 2. Check the pump and take it into lathe workshop for necessary works including impeller, shaft, plate etc repair 3.Check the bearing condition and overhaul it, change it if necessary 4. Check the vacuum line and Refit the pump with motor and create sufficient vacuum as per the direction of department staff | - | job | - | - |
| 1.003 | OD251644/2023-2024:Supply Installation ,Testing and commissioning including casting and machining charge of Gun metal impeller for 75 HP to 90HP motor pump sets including dismantling the existing pump set checking the pump shaft and taking into the lathe workshop for necessary works checking the bearing condition fitting the impeller to the pump with all the packing (rubber and gland packing with required nuts and bots and refill the pump oil and test run the motor pump set on full load condition | - | kg | - | - |
| 1.004 | OD253233/2023-2024:Charges for providing Vacuum pipe line for Vacuum pump sets by providing 25 mm GI Pipe , GI Bend G I Coupling , Hose collar, Hose coupling , Half turn valve , Flexible hose , necessary bolts and nuts etc complete with all industrial charges and labour charges | - | job | - | - |
stage.html
html • 0.03 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1445159.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.03 MB
Tendernotice_2.pdf
PDF • 0.10 MB
Tendernotice_3.pdf
PDF • 0.36 MB
Tendernotice_4.pdf
PDF • 0.22 MB
MAKE.pdf
Tender Documents • 0.20 MB
BOQ_1445159.xls
BOQ • 0.30 MB
NIT.pdf
Tender Documents • 0.03 MB
SBD.pdf
Tender Documents • 1.63 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .