Karur District-K.Paramathi Block-AGAMT-II-2022-23 - Construction of Anganwadi Building at Nanjaikalakurichi H/o.Nanjaikalakurichi

Amount

Construction of Anganwadi Building at Nanjaikalakurichi H/o.Nanjaikalakurichi

Earth work excavation for foundation in all clauses of soils and sub soils to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring strutting and boiling out water whenever necessary et complete complying with stand

Supplying and filling in foundation and basement with filling excavated earth in larges of not more than 15cm thick well rammed watered and compacted including & conveyance and all labour charges etc.,

Cement concrete 1:4:8 mix ( one cement four sand and eight aggregate)using 40mm gauge hand broken granite tone jelly for foundation including dewatering if found ecessary and laid in layers of not more than 15 cm thick and compacted,etc., complete comply

Brick work in cm 1:5 mix(one cement and five sand )using country bricks ground maded of size 23 x 11 x 7 cm including curing,finishing and cost & Conveyance of all materials etc., complete.

Supplying and erecting centering for sides Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X

Supplying fabricating and placing in position of ribbed steel rods for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors etc., complete

RCC 1: 1/2 :3 mix using 20 mm ISS HBG metal for RCC items of work excluding items of works excluding centering,shuttering, and ost of reinforcement grill ,out including curing etc complete and also including fixing fan clamps and ixtures in rcc works wh

Plastering with cm 1:5 mix( one cement and five sand ) to 12 mm thick including cost and conveyance of all materials in all floors etc.,as directed by departmental officers etc, complete complying with standard specifications.

Plastering surfaces of RCC items such as slabs,beams,sunshades with cement mortar 1:3 -10mm thick including packing, providing cement mortar beading for sunshades staircase ,steps, lands slabs etc.,as directed by departmental officers etc, complete compl

Plastering 1:4 mix (onecement and five sand) 20mm thick including cost of labour charges etc., completeas directed by departmental officers etc, complete complying with standard specifications..

Providing granolethick floor finish in cement concrete 1:2:4 mix using 25mm ISS metal to 25mm thick including cost and conveyance of all materials to site and all labour charges for mixing, laying, curing etc., complete

Paving the floor with Plain/design ceramic tiles (colour and shade as directed) of size 600mm x 600mm x 6mm in all floors over a base layer of cement mortar 1:3 (one cement and three sand) 20mm thick laid in-situ and ponted with same coloured cement as

Dadooing of walls with colour glazed tiles of size 150mm x 150mm x 6mm size of approved make and quality and colour Iset in cemnt mortar 1:2 (one cement, two sand) over 10mm base layer plastering and pointing with white cement neatly as directed.

Providing weathering course with best quality of brick Jelly 20mm gauge in pure slaked lime (no sand to be added) over roof slab,the proportion of brick jelly to lime being '32 to 12.5 well beated with wooden beaters for giving required slope and thicknes

Finishing top roof mix one course machine pressed tiles of size 20 cm x 20 cm x 2 cm approved qty with,CM.1:3 12 mm thick mixed with WPC at 2% by weight of cement used and top pointed with the same mortar etc

Distembering two coats of oil bound distember using one coat of primer coat including cost & conveyance to size and all labour charges etc., complete.

Painting two coats with ready mixed Exterior Emulsion paint of approved qualityand colour over a priming coat, including through scrapping,clean removel of dirt etc complete .

Painting two coats of new iron work with best quality synthetic enamel paint of approved quality and colour with priming coat including the cost all materials etc.,complete, in all floors.

Fabricating Supply and fixing and position of MS Door with single leave. The door outer frame will be 40x40x6mm MS angle, the shutter frame will be 35x35x6 mm, MS angle intermediate stiffner will be 35x35x6 mm with cross stiffner 25x 25x5 mm flats covere

Door 0.90mx2.1m

Fabricating Supply and fixing and position of MS Windows with two leave. The window outer frame will be 35x35x6mm MS angle, the shutter frame will be 25x25x6 mm, MS angle intermediate stiffner will be 25x25x6 mm with cross stiffner 25x 25x5 mm flats cover

Window Size 1.20m x 1.30mmx2.1m

Ventilator 0.90m x 0.45m

Jolly size 0.90 x 0.45m

Supplying and fixing following electrical arrangement

Wiring with 2 x 1.5 sq.mm(22/0.3) PVC insulated SC. Unsheathed Cu. Conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A F.T. switch withpainting of suitable colour for open PVC light point / fan point (For electrical regulator).SD 17

Supply and fixing tube ligh fitting and all labour chargets tc complete

Supply and fixing PVC PLUG POINT and all labour charges tc ecomplete

Supply and runoff 2 of 6 mm2 (84/0.3) pvc insulated SC unsheathed Cu.conductor of 1100v on 7/20 GI bearer wire for service connection main

Supplying and fixing of 32 AMPS DPI Switch with fuse and Neutral (side handle) on suitable TW/PWD Earthing SD135 Service main

Supplying and fixing of 1200mm (40") AC Ceiling fan with stepped electronic 300W regulator with 1m down rod on the existing clamp

GST Amount for providing Service to Government Contract Works for the above ConstructionWorks. GST Amount is the Total GST Amount for overall quoted amount above this row in column "BB" for all works in this package} (Refer Clause 13.2 & 13.3 of Section 2 of Instruction to Bidders (ITB) of SBD)

Sakthivel K