Development of Shree Ambaji mata Mandir at Bhadarva, Ta. Savli, Dist. Vadodara.

No Figure (Rs)

Clearing and grubbing road land including uprooting rank vegetation grass bushes, shrubs, sapling and trees girth up to 300 mm Rupees Twenty Eight Thousand Four

1 0.01107 Hector 28,455.09

removal of stumps of trees cut earlier and disposal of unserviceable materials (C) By mechanical means in area of light jungle Hundred Fifty Five and Nine Paise

Demolition including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift. (i) R.C.C. Rupees One Thousand Fifty Six and Fifty

work Eight Paise

Demolition of Brick work and stone masonry including stacking of serviceable materilas and disposal of unserviceable materials Rupees Five Hundred Forty Nine and

with all lead and lift.(ii) In Cement Mortar. Forty Nine Paise

Dismentaling tiled of stone floors laid in mortar including stacking of serviceable materilas and disposal of unserviceable Rupees Forty Seven and Ninety Four

materials with all lead and lift. Paise

5 Dismentling steel work including distempering and stacking the materials with all lead and lift. 500 Kg 3.76 Rupees Three and Seventy Six Paise

Rupees Six Hundred Eight and Nineteen

6 Demolition and disposal of unserviceable materials with all lead and lift.(i) Lime concrete. 25 Cum 608.19

Dismentling doors, windows, ventilators etc. (wood or steel) shutters including chowkhats architraves, holdfasts and other Rupees One Hundred Eighty Seven and

attachment etc. complete and stacking them within all lead and lift.(i) Not exceeding 3 Sq.M. in area. Fifty Two Paise

Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off Rupees Two Hundred Sixty Two and

the excavated stuff upto 50 Meter lead. (C) Hard Murrum Fifty Two Paise

Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out and stacking of useful materials and disposing off Rupees Two Hundred Eighty and Thirty

the excavated stuff upto 50 Meter lead.(C) Hard Murrum Eight Paise

Filling available excavated earth (excluding rock) in trenches. plinth, sides of foundations etc. in layers not exceeding 20 cm. in Rupees One Hundred Thirty Three and

depth consolidating each disposited layer by ramming and watering. Sixty Five Paise

consolidating etc. complete. Twenty Nine Paise

Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4- graded stone aggregates 20 mm nominal size) and Rupees Three Thousand Six Hundred

curing complete excluding cost of formwork in (A) Foundation and Plinth Fifty Six and Thirteen Paise

Providing and laying controlled cement concrete M.250 and curing complete including the cost of formwork and excluding the Rupees Four Thousand Nine Hundred

cost of reinforcement for reinforced concrete work in (A) Foundations, footings, Base of columns and Mass concrete.-Footing Eighty Five and Forty Paise

Providing and laying controlled cement concrete M.250 and curing complete including the cost of formwork and excluding the

Rupees Eight Thousand Two Hundred

14 cost of reinforcement for reinforced concrete work in (D) Columns, Pillars posts and struts, upto floor two level.-Column up to 5 Cu.m. 8,261.63

Sixty One and Sixty Three Paise

Providing and laying controlled cement concrete M.250 and curing complete including the cost of formwork and excluding the

Rupees Seven Thousand Three Hundred

15 cost of reinforcement for reinforced concrete work in (D) Columns, Pillars posts and struts, upto floor two level-Column up to 8 Cu.m. 7,396.44

Ninety Six and Forty Three Paise

floor two level

Providing and laying controlled cement concrete M.250 and curing complete including the cost of formwork and excluding the

Rupees Six Thousand Five Hundred

16 cost of reinforcement for reinforced concrete work in (C) Slabs,landing,shelves,Balconies, Lintels, Beams, Girders and Cantilever 7 Cu.m. 6,523.64

Twenty Three and Sixty Four Paise

upto floor two level.-Ground Beam

Providing and laying controlled cement concrete M.250 and curing complete including the cost of formwork and excluding the

Rupees Five Thousand Four Hundred

17 cost of reinforcement for reinforced concrete work in (C) Slabs,landing,shelves,Balconies, Lintels, Beams, Girders and Cantilever 17 Cu.m. 5,435.32

Thirty Five and Thirty Two Paise

upto floor two level.-Beam

Providing and laying controlled cement concrete M.250 and curing complete including the cost of formwork and excluding the Rupees Six Thousand Two Hundred

cost of reinforcement for reinforced concrete work in (B) Walls, from top of foundation level upto floor two level-Lintel & Sill Eighty Four and Ninety Seven Paise

Providing and laying controlled cement concrete M.250 and curing complete including the cost of formwork and excluding the

Rupees Six Thousand Two Hundred Sixty

19 cost of reinforcement for reinforced concrete work in (C) Slabs,landing,shelves,Balconies, Lintels, Beams, Girders and Cantilever 16 Cu.m. 6,266.09

Six and Nine Paise

upto floor two level.-Slab

Providing and laying controlled cement concrete M.250 and curing complete excluding the cost of formwork and reinforcement Rupees Four Thousand Two Hundred

for reinforced concrete work in (A) Foundations, footings, Base of columns and Mass concrete.-Grade Slab Forty Seven and Fifty Seven Paise

Item Rate in

Description of Item Quantity Unit Rate in Words Amount (Rs)

No Figure (Rs)

Providing and laying controlled cement concrete M.200 and curing complete including the cost of formwork and excluding the Rupees Seven Thousand Eight Hundred

cost of reinforcement for reinforced concrete work in (E) Staircases excluding landing upto floor two level Forty Four and Seventeen Paise

Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, binding and placing in position complete upto Rupees Seventy Seven and Twenty Nine

floor two level Paise

Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in foundation and Rupees Four Thousand Four Hundred

plinth in Cement Mortar 1:5. (1- Cement : 5 -fine sand)(B) Conventional-Superstructure Twenty Eight and Eight Paise

Providing 10mm thick cement plaster in single coat on brick/concrete walls for interior plastering upto floor two level and Rupees One Hundred Forty Three and

finished even and smooth in (i)Cement mortar 1:3 (1-cement:3-sand)-Ceilling plaster Sixty Six Paise

Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single or half brick walls for interior plastering Rupees One Hundred Seventy One and

upto floor two level and finished even and smooth in (ii) Cement mortar 1:4 (1-cement :4-sand)-Internal Plaster Twenty One Paise

Providing and applying 25mm thickTexture plaster with finishing with Purlina / Rustic texture material Providing 2 coats of

10mm thick cement plaster in single coat on Rough (Similar)side of single or half brick walls for interior plastering upto floor

two level and finished even and smooth in (ii) Cement mortar 1:4 (1-cement :4-sand) with Extra over items 58 to 64 for Rupees One Thousand Two Hundred

finishing with a floating coat of neat cement slurry and (A) for providing and mixing water proofing materials in cement mortar Fifteen and Forty Four Paise

in proportion recommended by the manufacturer. Providing and supplying final coat of heritage plaster as directed by site

incharge and approved by architect-Exterior Plaster

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on

Rupees One Thousand Four Hundred

27 new surface or fixing on existing flooring by adhesive material including dismentaling of existing flooring and jointed with color 203.1 Sqmt 1,472.91

Seventy Two and Ninety One Paise

cement slurry including finised with flush pointing & cleaning the surface etc. complete for light shade

Providing and laying polished GRANITE stone slab 18mm thick in risers of steps,skirting Dedo and pillars laid on 10mm thick

Rupees One Thousand Four Hundred

28 cement mortar 1:3 (1-Cement : 3 coarse sand) and jointed with gray cement slury mixed with pigment to match the shade of 47.3 Sqmt 1,497.46

Ninety Seven and Forty Six Paise

slab including rubbing and polishing etc. complete.

Providing and laying Vitrified tiles 8 to 10 mm thick , in skrting risers of steps and dedo on 10mm thick cement plaster 1:3 (1- Rupees One Thousand Five Hundred

cement : 3-coarse sand) and jointed with white cement slurry Ninety Two and Forty Paise

Providing and Fixing Heritage Style "GRC Ornamental Baluster Railing" of 200mmX 200mmX100mm square base and top and

baluster total height of 850mm. central dia variable from 100mm to 180mm as per drawing. including fixing with necessary

joinery accessories, grouting, reinforcement of 8mm dia, etc. Item includes Designing of decorative Heritage Pattern on top and

Rupees One Thousand Three Hundred

30 bottom 100mm, Casting, transport , scaffolding, cutting and finishing of and polishing if require. No extra charges for cutting 121 Nos 1,370.57

Seventy and Fifty Seven Paise

machines/blades etc. Complete as directed by Architect In charge. Contractor must take the approval of design sample and

shop drawing of railing baluster from the architect/engineer in charge. fixed with Stainless Steel -316 Marine grade hardware

only - Testing report of hardware to be provided before installation

Providing and fixing five courses water profing treatment with bitumen felt consisting of second and fourth course of blown /

bitumen or/ and residual bitumen applied hot at 1.2 kg.per Sq.M.of area for each course and first course with fibre base

Rupees Four Hundred Eighty Three and

31 bitunen saturated under lay type land third course with fibre base self finished felt type 2 grade 1 and fifth and final course of 96 Sqmt 483.11

Eleven Paise

stone grit 6mm and down size or pea sizes gravel spread at 0.008 Cu. Metre / Sq. metre including preparation of surface

excluding grading complete.

Providing cement vata (10cm. x 10 cm. size) quarter round in cement mortar 1:1 including neat cement finishing, watering etc. Rupees Twenty Four and Twenty Eight

complete. Paise

Item Rate in

Description of Item Quantity Unit Rate in Words Amount (Rs)

No Figure (Rs)

Supply and fixing at site of work carved fine up to 8 mm depth HERITAGE STYLE chisal dressed ornamental BALESHWAR GODD

QUALITY STONE in requared size for temple work in 1:3 cement sand morter and jointed in white cement to match the colour

Rupees Fifty Four Thousand Nine

of stone.Joints of stone to be not more than 1/8 inches and depth up to stone size ,all visible angles and edges to be straight

33 1.132672 Cum 54,989.96 Hundred Eighty Nine and Ninety Six

and free from chipping work shall be strictly in plumb line and level including providing dowelling and jointed by copper metal

damps of suitable size and as per drawing and design including all scaffolding and lead lift worked to be carried out as per

approved Drawing which is displayed in full scale at temple site KARNPITH

Supply and fixing at site of work carved fine up to 8 mm depth HERITAGE STYLE chisal dressed ornamental BALESHWAR GODD

QUALITY STONE in requared size for temple work in 1:3 cement sand morter and jointed in white cement to match the colour

Rupees Fifty Four Thousand Nine

of stone.Joints of stone to be not more than 1/8 inches and depth up to stone size ,all visible angles and edges to be straight

34 10.25068 Cum 54,989.96 Hundred Eighty Nine and Ninety Six

and free from chipping work shall be strictly in plumb line and level including providing dowelling and jointed by copper metal

damps of suitable size and as per drawing and design including all scaffolding and lead lift worked to be carried out as per

approved Drawing which is displayed in full scale at temple site MANDOVAR

Supply and fixing at site of work carved fine up to 8 mm depth HERITAGE STYLE chisal dressed ornamental BALESHWAR GODD

QUALITY STONE in requared size for temple work in 1:3 cement sand morter and jointed in white cement to match the colour

Rupees Fifty Four Thousand Nine

of stone.Joints of stone to be not more than 1/8 inches and depth up to stone size ,all visible angles and edges to be straight

35 4.077619 Cum 54,989.96 Hundred Eighty Nine and Ninety Six

and free from chipping work shall be strictly in plumb line and level including providing dowelling and jointed by copper metal

damps of suitable size and as per drawing and design including all scaffolding and lead lift worked to be carried out as per

approved Drawing which is displayed in full scale at temple site PERAPET

Supply and fixing at site of work carved fine up to 8 mm depth HERITAGE STYLE chisal dressed ornamental BALESHWAR GODD

QUALITY STONE in requared size for temple work in 1:3 cement sand morter and jointed in white cement to match the colour

Rupees Fifty Four Thousand Nine

of stone.Joints of stone to be not more than 1/8 inches and depth up to stone size ,all visible angles and edges to be straight

36 4.474054 Cum 54,989.96 Hundred Eighty Nine and Ninety Six

and free from chipping work shall be strictly in plumb line and level including providing dowelling and jointed by copper metal

damps of suitable size and as per drawing and design including all scaffolding and lead lift worked to be carried out as per

approved Drawing which is displayed in full scale at temple site PILLAR BEAM & CEILING

Supply and fixing at site of work carved fine up to 8 mm depth HERITAGE STYLE chisal dressed ornamental BALESHWAR GODD

QUALITY STONE in requared size for temple work in 1:3 cement sand morter and jointed in white cement to match the colour

Rupees Fifty Four Thousand Nine

of stone.Joints of stone to be not more than 1/8 inches and depth up to stone size ,all visible angles and edges to be straight

37 10.53385 Cum 54,989.96 Hundred Eighty Nine and Ninety Six

and free from chipping work shall be strictly in plumb line and level including providing dowelling and jointed by copper metal

damps of suitable size and as per drawing and design including all scaffolding and lead lift worked to be carried out as per

approved Drawing which is displayed in full scale at temple site SIKHAR

Supply and fixing at site of work carved fine up to 8 mm depth HERITAGE STYLE chisal dressed ornamental BALESHWAR GODD

QUALITY STONE in requared size for temple work in 1:3 cement sand morter and jointed in white cement to match the colour

Rupees Fifty Four Thousand Nine

of stone.Joints of stone to be not more than 1/8 inches and depth up to stone size ,all visible angles and edges to be straight

38 1.189306 Cum 54,989.96 Hundred Eighty Nine and Ninety Six

and free from chipping work shall be strictly in plumb line and level including providing dowelling and jointed by copper metal

damps of suitable size and as per drawing and design including all scaffolding and lead lift worked to be carried out as per

approved Drawing which is displayed in full scale at temple site CHOWKY SAMRAN

Supply and fixing at site of work carved fine up to 8 mm depth HERITAGE STYLE chisal dressed ornamental BALESHWAR GODD

QUALITY STONE in requared size for temple work in 1:3 cement sand morter and jointed in white cement to match the colour

Rupees Fifty Four Thousand Nine

of stone.Joints of stone to be not more than 1/8 inches and depth up to stone size ,all visible angles and edges to be straight

39 0.339802 Cum 54,989.96 Hundred Eighty Nine and Ninety Six

and free from chipping work shall be strictly in plumb line and level including providing dowelling and jointed by copper metal

damps of suitable size and as per drawing and design including all scaffolding and lead lift worked to be carried out as per

approved Drawing which is displayed in full scale at temple site BARSHAKH

Item Rate in

Description of Item Quantity Unit Rate in Words Amount (Rs)

No Figure (Rs)

Marble Flooring Works Providing and laying Mirror polished White Marble Flooring in floor Using 15 to 18 mm thick

Approximately 600 x 600 mm size with residue and skirting as per the Approved Pattern and Drawing on 20 mm thick cement

mortar 1:3 ( 1cement : 3 coarse sand)with Neat White cement slurry on top of bedding , on 40 mm wired finish screed 1:2:4 (1

cement : 2 coarse sand : 4 graded stone. Including filling joints with floating white cement slurry, Mirror Polishing Etc. all

Complete.(All work should be executed as per detail Ar. Drawing and detail. . All work inclusive of all taxes, transportation, Rupees Eight Thousand Two Hundred

wastage, protection coverings etc. All mortar dropping shall be cleaned by wet jute brush immediately after completing Thirty Six and Sixty Six Paise

masonry work to show clean stones in elevation before closing day's work. Based on basic plans, elevations & sections of

Mandir(temple) provided by the Architect, the contractor shall submit detailed final execution Autocad drawings applicable to

all stone works for the temple to Architect for their approval before issuing the same for execution. The drawings would include

all elements and ornamentation work based on tender items applicable to all stone works for the temple.

Providing and fixing Granite Jamb for door and windows of 18 to 20mm thick and width as per wall thickness polished and cut

as per required size of door/window opeinings. Fixed to wall and lintle with adhesive and Hilti Frame anchor HRD-CR2 10x100 at

41 19 Rmt 2,043.01 Rupees Two Thousand Forty Three Only

1000mm distance in vertical rames and 600mm distance in horizontal frames. Jamb fixed to walls with Adhesive Material

Kerakol Bioflex Flexible Mineral Adhesive. as per instruction of site incharge complete

Providing and fixing window having extruded aluminum Colour anodized section frame main outer size 127mm x 38.10mm x

1.35mm @wt. 1.384kg/m, horizontal Four track member size 122.20mm x 31.75mm x 1.10mm@ wt 1.205 kg/m, vertical

member of size 122.20mm x 31.75mm x 1.50mm @1.398 kg/mt with sliding shutters of horizontal member size 40mm x 18mm Rupees Two Thousand One Hundred

x 1.29mm@ 0.456kg/mt ,vertical member of size 40mm x 18mm x 1.29mm @ 0.456 kg/mt with 5 mm thick transparent bronze Forty and Thirty Three Paise

colour tinted float glass with powder coated aluminum fittings and fixtures and transparent silicon sealant glass fixing to frame

as per details etc complete for window.

Providing and fixing 35 mm thick water proof flush door solid core double shutter with 1mm thick laminated sheet on both

side of the shutter having teakwood lipping edge patti of 38 mm x 25.4 mm on all edges, including Indian teak wood frames

cm x 7 cm with Melamine Polish matching shade of laminate with Magnetic catcher triple strip vertical type(2 Nos), S.S.

Rupees Two Thousand Nine Hundred

43 tower bolt (barrel type) 300x10 mm (2 Nos) (Make : Define, Kich : TBR3S), Main door set handle 19mm dia x 150 mm SS 304 10 Sqmt 2,970.41

Seventy and Forty One Paise

MATT 10 x 150 mm connector (2 Nos), MAKE: DEFINE: DF-PH-02, kich:PRDH1906S and SS matt Hinges of 100mm X 75mm X

3.2mm (8 Nos) (Make : Kich Item No.PRBHT2B34 and Define Make - Item No. DF-BBH-04) with necessary SS fixtures and

fastenings etc. complete all SS fittings to be of SS304 matt finish as directed by Engineer-in-charge.

Providing, laying and jointing in true line and level 110 diametre U.P.V.C (Type B) conforming to IS 13592-1992 with one end

plain and other end socketed with rubber ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system

pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size Rupees Eight Hundred Fifty Six and

110 mm diametre x 149 mm length x 145 mm heigh at every 2000 mm center to center or shall be concealed in walls as Three Paise

directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive

solvent cement including cost of all materials.

Applying two coats of Birla or Asian acrylic lappy (putty) and two coats of primer of approved brand and manufacture on new

45 wall surface to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign 337 Sqmt 40.59 Rupees Forty and Fifty Nine Paise

matter and sand papered smooth

Wall painting (three coats) with plastic emulsion paint of approved brand and manufacture on undecorated wall surface to

Rupees One Hundred Twenty Two and

46 give an even shade including thoroughly brushing the surface free from mortar droppings and other foreign matter and sand 337 Sqmt 122.40

Forty Paise

papered smooth

Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to give an required shape even shade after Rupees One Hundred Seventeen and

thoroughly brushing the surface to remove all dirt, and remains of loose powdered materials.etc complete Forty Paise

Item Rate in

Description of Item Quantity Unit Rate in Words Amount (Rs)

No Figure (Rs)

Carring out plinth treatment to post construction / existing structure by spraying chemical solution for termite control

treatment including labour and material consistment with I.S.I specification. Using Chlordene and Chiorpurfiles 20 EC. As Per

Rupees Ninety Eight and Eighty Two

48 6131_paret-II Consentration Weight one percent is recommended i.e one litre 20 EC chemical emulsion with 19 liter give 1 % 111 Sqmt 98.82

concrentration inclusive of one litre chemical emulsion appication at the rate of 5 Litre chemical / Sqm of surface is

recommended as per I.S

Providing and Fixing the S.S. 304 Letters of given size as per Architect's drawings (Approx Height of each letter 10 to 12 inches) Rupees Two Thousand Seven Hundred

along with all necessary hardwares and accessories Fifty and Forty Three Paise

Pro. And fixing single layer water proof gypsum board 12.5 mm thick sections using water proof board of size 1220 mm x

mm x 8.0 mm suspended by GI suspender channel of size 25 mm x 3 mm with intermediate channel og size 18 mm x 40 mm x

0.8 mm at 1220 mm center to center ceiling section of size 40 mm x 35 mm x 0.55 mm at 457 mm c/c and perimeter channel A Rupees Six Hundred Six and Ninety Five

of size 20 mm x 27 mm x 30 mm x 0.5 mm at edges & drops incl.paper tap sand sofit cleat, anchor fastener, scoch bolt Paise

connecting cleat,joining compound top coat on ceiling incl.making necy.opening for light fitting,diffuser etc. comp. as per detail

drawing as directed

Providing and fixing fibre insulations board lining with butt jointing and Nails (frame worked cover fillets to be measured and Rupees Four Hundred Forty Three and

paid for separately) (iii) 25mm thick Fifty Six Paise

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing

used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast powder coated

and high U.V. & corrosion resistance with diffuser housed in aluminium casted body with company mark/name 160V to

270V,Power Factor more than 0.9, THD < 15 %, CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt , LED driver Rupees Six Hundred Thirteen and Seven

efficiency > 85 % ( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage Paise

with provision for Plane front frame with translucent cover fixed to housing complete.IP20 (iv) 18 to 20 watts, 8" x 8", Surge-

KV Cat-III Brand as- Approved By architect

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing

used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast powder coated

and high U.V. & corrosion resistance with diffuser housed in aluminium casted body with company mark/name 160V to

Rupees Four Hundred Sixty Six and Sixty

53 270V,Power Factor more than 0.9, THD < 15 %, CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt , LED driver efficiency 32 Nos 466.62

> 85 % ( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED

fittings. (B) LED Panel Light with provision for Plane front frame with translucent cover fixed to housing complete.IP20 (iii) 12-15

watts, 6" x 6", Surge-2 KV Cat-III Brand as- Approved By architect

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing

used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast powder coated

and high U.V. & corrosion resistance with diffuser housed in aluminium casted body with company mark/name 160V to

Rupees Two Hundred Twenty and

54 270V,Power Factor more than 0.9, THD < 15 %, CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt , LED driver efficiency 30 Rmt 220.18

Eighteen Paise

> 85 % ( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED

fittings. (D) LED Strip Light (ii) Minimum 7.2W -240 LED per meter,(2 wire, IP-65) with non integral suitable Driver complete Cat-

Supply, Installation, Testing and Commissioning of suitable sweep, BEE 5 Star rated, Ceiling fan with Brush Less Direct Current

(BLDC) permanent ferrite magnet Motor, class of insulation: B, Rust free 3 nos.Aluminium blades, 2 nos. canopies, shackle kit

with earthing provision, copper winding, Power factor not < 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum

Rupees Two Thousand Eight Hundred

55 215 CMM, 350 RPM,230v (tolerance as per IS : 374-2019), THD < 10%, with remote unit for Speed Control and all remaining 2 Nos 2,885.57

Eighty Five and Fifty Seven Paise

accessories including safety pin, nut bolts, washers, temperature rise = 75 degree C (Max.), suitable for 140 to 285 Voltage and

rectifier circuit with surge, over current and overload protection , 50 Hz, Single phase AC Supply, earthing etc. Complete as

required. (B) 1200 mm Sweep (48") Brand Havells or equ. - Approved by Architect

Item Rate in

Description of Item Quantity Unit Rate in Words Amount (Rs)

No Figure (Rs)

Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe down rod erected duly painted for fan complete with

proper insulation without leakage and earthing. Supplying & erecting Fan Hook of 10 mm M.S. Round bar grouted in RCC slab Rupees Three Hundred Seventy Six and

with Making the site as original. Providing Fan clamp of 30 x 5 mm flat of required length & 10 mm M.S. Bolt & Nuts erected Seventy Three Paise

with necessary hook of 10 mm M.S. Round Bar.

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires up to 10 mtr length , in below type of pipe erected with 6A Modular type switch / bell push

& accessories and earth continuity of following type, erected on PVC / Metallic/Wooden box, single mounting base frame Rupees Three Hundred Fifty Nine and

covered with textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe erected, with necessary Fifty Six Paise

Lamp holder/ceiling rose / H.D.Connector as directed. (f) with medium class Rigid PVC pipe and accessories erected concealed

in wall/ceiling complete CAT-III

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of .ISI marked 1.1 KV Grade FRLS PVC

insulated multi strand copper wires up to 10 mtr length, in below type of pipe erected with 6A Modular type switch and hum

free EME step type electronic fan regulator mounted and accessories with earth continuity of following type erected on PVC / Rupees Six Hundred Twenty Nine and

Metallic/Wooden box, single mounting base frame covered with textured/metallic/white front plate modules erected on / in Twenty Three Paise

wall / ceiling as per pipe erected. with necessary ceiling rose / H.D.Connector as directed. (f) with medium class Rigid PVC pipe

and accessories erected concealed in wall/ceiling complete CAT III

Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin socket erected on PVC / Metallic/Wooden box,

Rupees Two Hundred Forty One and

59 single mounting base frame covered with textured / metallic/white front plate modules erected on / in wall / ceiling with 4 Nos 241.39

Thirty Nine Paise

following type accessories Cat.III

providing and erecting Approved make RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short Circuit

withstand capacity of 10 KA and suitable for operation on single phase 240 V,50Hz. having characteristic of quick action & Rupees One Thousand Nine Hundred

tripping with all advance feature & do not incorporate any electronic component. for following Max. rating erected as directed Sixty Nine and Fifty Paise

(i) 25 Amps.DP Cat-III

Supplying & erecting approved make RCCB + MCB (Electro magnetic type only) working on residual current device having 10 KA

short circuit breaking capacity and 30 mAmp. Sensitivity & 30 mili sec. tripping time conforming to IS 12640 test knob facility

Rupees Two Thousand Fifty Five and

61 trip free mechanism operating for rated leakage at nominal ten volt, complete erected including all materials lugs screws etc. 2 Nos 2,055.35

Thirty Five Paise

completed. [d] 6A to 25 A, 4 Pole Three Phase

Providing & erecting approved make thermo plastic MCB/RCCB distribution board having modular Double door with DIN rails,

Rupees Two Thousand Three Hundred

62 epoxy powder coated finish metal frame & door assembly with Acrylic/ Plastic door, spring & hinged pins complete with 2 Nos 2,346.23

Forty Six and Twenty Three Paise

required PVC sleeved 32 / 63A copper Bus strips without MCB / RCCBs (e) Two Row 28 Module

Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured copper cable 1.1 KV grade to be erected as directed of following size. Rupees Seven Hundred Twenty Four and

(N) 4 core 16 Sq. mm Item Will be paid on actual measurement Seventeen Paise

providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following

type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green Rupees One Hundred Seven and Six

colour for earth continuity of following size (A) with medium class Rigid PVC pipe and accessories (a) 2 wire 4 sq. mm Item Will Paise

be paid on actual measurement

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral

link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The Rupees One Thousand One Hundred

DBs should be used of same company of MCB to be used) suitable for (b) IP-43 Fifty Two and Forty One Paise

(iii)8 way.

Providing and erecting XLPE (IS:7098) (I)-88ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall

Rupees One Thousand Eight Hundred

66 with necessary clamps or in existing trench / pipe of following size of cables. (B) 3 1/2 core 35 Sq. mm ( 16 Sq. mm 1/2 core) 25 Rmt 1,863.45

Sixty Three and Forty Five Paise

(main Panel to Sub Panel

Tender Value In Words

Rupees Forty Seven Lac Fifty Three Thousand Six Hundred and Thirty Seven Paise

I/We am/are willing to carry out the work at…% above/below percent (Should be wri en in figures and words) of the es mated rate men oned above. Amount of my /our tender works out as

Item Rate in

Description of Item Quantity Unit Rate in Words Amount (Rs)

No Figure (Rs)

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

In words___________________________________ In words_______________________________

1 The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done

3 GST and Income tax TDS will be deducted at a source while making payments of bills

In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement Consumption/16/C, Date:11/05/2017 as stated in S.O.R. therefore in

4 R.C.C. items where there is a change as per actual mix design the cost of difference of cement consumption have been deducted from the rate of original item at the rate of input rate mentioned

in all the tender