RE-ETENDER MATERIAL SUPPLY PHASE II

MATERIAL SUPPLY PHASE II

STONE AGGREGATE 20 MM SINGLE SIZE

STONE AGGREGATE 10 MM SINGLE SIZE

COARSE SAND ZONE III (M SAND)

PORTLAND CEMENT

PORTLAND CEMENT

40 mm stone aggregate single size

Twisted steel/deformed bars

Twisted steel/deformed bars

well graded material for sub base grading I,53MM TO 9.5 MM BELOW @50 %

well graded material for sub base grading I,9.5 MM TO 2.36 MM BELOW @20 %

well graded material for sub base grading I,2.36 MM BELOW @30 %

Double clip (Bridge clip)

Single clip

MS tube 40mm dia

Solid block 30x20x15cm

Stone masonry work

Trough and bond stone size 24x24x39cm

Royalty for good earth

Solid block size 30x20x20cm

Solid block size 40x20x10cm

Flats upto 10mm in thickness

Mild steel round bar 12mm dia and below

Welding by electric plant

Red oxide zinc chromate primer

Structural steel such as tees angles,channels and RSJ

Adjustable span ESO(2.35-3.40)

Adjustable telescopic prop 3m (2.02-3.75m)

Beam clamp 300-380mm(450-1070mm)

Corner angle 45x45x5mm,2.5m long

Column clamp 450x1070mm

Prop 2m (2-3.5m)

Twisted steel/deformed bars

Anjiliwood scantls

Mild steel round bars about 12mm dia

Rawl plug 50mm (Designation 10 numbers)

Bright finished or black enameled mild steel butt hinges 50x37x1.5mm

Bright finished or black enameled mild steel butt hinges 100x58x1.9mm

Bright finished or black enameled mild steel screws 20mm

Bright finished or black enameled mild steel screws 40mm

Anjiliwood planks

Float glass sheet of nominal thickness 4mm (weight not less than 10kg/m2)

Fine sand (zone 4)

Ceramic glazed tiles first quality 300x300mm in all shades and designs of white,ivory,gray,fume red brown etc.

Ceramic glazed tiles first quality minimum thickness of 5mm in all colours shades and designs except Burgendy,Bottle green black

Water thinnable cement primer for interior wall surface having VOC content less than 50 grams/litre

Plastic emulsion paint

Pink primer (for wood)

Synthetic enamel paint in black or chocolate shade

PVC pipe 25mm outer dia 10kgf/cm2

PVC 20mm outer dia 10kgf/cm2

PVC pipe 50mm outer dia 6kgf/cm2

PVC pipe 110mm outer dia 6kgf/cm2

PVC pipe 63mm outer dia 6kgf/cm2

PVC vent cowl 63mm dia

PVC elbow 63mm dia

Stainless steel kitchen sink without drainboard 470x420mm bowl depth 178mm

CI brackets for wash basins and sink

15mm CP brass tap

Polythene water storage tank with cover and suitable locking arrangement per litre

Vitreous china orrisa type W.C pan size 580mm

Flushing cistern PVC 10 lts capacity (low level) (white) (with fittinhgs,accessories and flush pipe)

100mm S.C.I trap with vent heel

Vitreous China flat back wash basin 550x400mm

CP Brass waste 32mm

Oxidised mild steel handles125mm

Oxidised mild steel screws 25mm

Oxidised mild steel tower bolt (barrel type 200x10mm)

Oxidised mild steel screws 30mm

Brass mortice latch and lock 100x65mm with six levers and a pair of brass lever handles

Please Enable Macros to View BoQ information