Construction of New Pashu Davakhana at Pandava Ta. Balasinor Dist. Mahisagar (Second Attempt)

Name of Work :- Construction of New Pashu Davakhana at Pandava Ta.

Balasinor Dist. Mahisagar

BILL OF QUANTITIES

Memorandum showing item of works to be carried out.

It. Description of Item Qty. Unit Rates in Total

No. Figure Amount

Civil works items

1 Excavation for foundation upto 1.50 mt depth including sorting out and stacking 1977.26 Cum 266.39

of useful materials and disposing the excavated stuff for all lead and lift for all

2 Excavation for foundation from 1.50 mt to 3.00 mt. depth including sorting out 328.92 Cum 260.11

and stacking of useful materials and disposing the excavated stuff with all lead

and lift for all sorts of soil.

3 Providing and laying cement concrete work 1:2:4 (1- Cement : 2- Coarse sand : 80.92 Cum 4352.09

4 graded stone aggregates 20 mm nominal size) and curing complete excluding

cost of formwork and reinforcement for reinforced concrete work in (A)

Foundations, footings, base or columns and mass concrete.

4 Providing and laying ordinary cement concrete 1:2:4 (1- Cement 2- coarse sand 1.11 Cum 8692.87

: 4- graded stone aggregates 20 mm nominal size) and finishing smooth

with,curing etc. complete including the cost of formwork but excluding the cost

of reinforcement for R.C.C work in (B) COLUMNS: (iii) Having cross-sectional

area more than 0.12Sq.M and upto 0.18 Sq.M

5 Providing and laying controlled cement concrete M-250 and finishing smooth 147.81 Cum 4868.76

with curing etc complete, including the cost of formwork but excluding the cost of

reinforcement for R.C.C. work in Foundations, footings base of columns & mass

6 Providing and laying controlled cement concrete M-250 and curing complete 42.98 Cum 8232.91

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in Columns, pillars, posts & struts upto floor two level

7 Providing and laying controlled cement concrete M-250 and finishing smooth 43.22 Cum 6053.94

with curing etc. complete including the cost of formwork but excluding the cost of

reinforcement for R.C.C. work in Plinth beams.

8 Filling available excavated earth (excluding rock) in trenches plinth side of 469.00 Cum 136.92

foundation etc. in layer not exceeding 20 cm in depth consolidation each

deposited layer by ramming and watering etc. complete.

9 Filling in foundation and plinth with murrum or selected soil in layers of 20 cm 158.39 Cum 295.15

thickness including watering, ramming and consolidating etc. complete.

10 Filling in plinth with sand under floors including watering, ramming, consolidating 14.83 Cum 479.80

and dressing complete.

It. Description of Item Qty. Unit Rates in Total

No. Figure Amount

11 Anti-Termite System:Providing and laying of permanentpiping technology anti- 256.40 Sq.m. 134.33

termite treatment before flooringwork by installing LLDP (Low linear density

polyethylene)tube of 8 mm O.D. & 6.4 mm 1.D. with inbuilt

pressurecompensation chip every 30 cm interval in the tube,having working

pressure of 2 Kg/cm2 and release rate of1.9 Itr/hour fixed by P-clips and nails.

The LLDP pipeshall be installed at the entire periphery of the buildingand at

internal network of building at a depth of 20 to200 mm under floor at every 2 to

mtr. c/c distance(adjusted as per building layout ) & Ends of loop passthrough a

PVC elbow of minimum 32 mm ID at junctionbox of wall and floor level, entering

into a steelreinforced grooved flexible pipe of minimum 22 mm IDleading into

junction box and the loops shall terminate injunction boxes & test every junction

during injectingchemicals for termite control treatment. The anti termitechemical

Imidacloprid 30.5% SC mix as per IS-6313(part III) shall be injected by the

pressure pump dilutedwith water @ 10.5 ml/5 ltr of water at the rate of

2Kg/sq.cm @ 5 Ltr/SMT. The contractor shall submitapproved line plan for

piping system and junction boxesdully approved by Engineer-in-Charge with

bond of 5year warranty.(i)Anti Termite chemical injected area(Chemical injecting

incl. labour cost)

12 Providing and laying damp proof course 25mm thick cement concrete 1:2:4 (1- 30.43 Sq.m. 321.97

cement : 2 coarse sand : 4 stone aggregate 10 mm nominal size) and curing

13 Providing and laying brick work using common burnt clay building conventional 39.62 Cum 4214.33

type bricks having crushing strength not less than 35 Kg./Sq.cm. in super

structure above plinth level and up to floor two level in cement mortar 1:6 (1

cement : 6 fine sand) including the cost of all materials and labour charges etc.

14 Providing and laying brick work using common burnt clay building conventional 74.71 Cum 4496.05

type bricks having crushing strength not less than 35 Kg/sq.cm. in super

structure above floor two level in cement mortar 1:6 (1 cement : 6 fine sand) for

Ground Floor including the cost of all materials and labour charges etc.

15 Providing and laying brick work using common burnt clay building conventional 27.75 Cum 4538.16

type bricks having crushing strength not less than 35 Kg/sq.cm. in super

structure above floor two level in cement mortar 1:6 (1 cement : 6 fine sand) for

First Floor including the cost of all materials and labour charges etc. complete.

16 Providing and laying half brick work using common burnt clay building 32.24 Sq.m. 750.76

conventional type bricks having crushing strength not less than 35 Kg/Sq.cm in

cement mortar 1:4 (1 cement : 4 coarse sand) in super structure above plinth

level upto floor two level for Ground floor including the cost of all materials and

labour charges etc. complete.

17 Providing and laying cement concrete 1:3:6 (1- Cement : 3- Coarse sand : 6 14.97 Cum 4147.33

crushed stone aggregates 20 mm nominal size) and curing complete including

cost of formwork in (A) Wall Caps / Coping

18 Providing and laying controlled cement concrete M-200 and curing etc. complete 1.96 Cum 7476.02

including the cost of form work but excluding the cost of reinforcement in (C)

Slabs landings shelves balconies, lintel -chhaja, beams, girders and cantilever

up floor to level. (Lintel)

19 Providing and laying controlled cement concrete M-200 and curing etc. complete 0.14 Cum 7517.57

including the cost of form work but excluding the cost of reinforcement in (C)

Slabs landings shelves balconies, lintel-chhaja, beams, girders and cantilever up

floor to level. (Lintel)

20 Providing and laying controlled cement concrete M-200 and curing etc. complete 2.11 Cum 6907.39

including the cost of form work but excluding the cost of reinforcement in (C)

Slabs landings shelves balconies, lintel-chhaja, beams, girders and cantilever up

floor to level (Chajja).

It. Description of Item Qty. Unit Rates in Total

No. Figure Amount

21 Providing and laying controlled cement concrete work of M-200 and curing 2.82 Cum 8605.20

complete including cost of formwork and excluding reinforcement for reinforced

concrete work in (E) Staircases excluding landing upto floor two level for

staircase in below give fair finish surface.

22 Providing and laying controlled cement concrete M-200 and curing complete 6.10 Cum 7976.10

including the cost of formwork but excluding the cost of reinforcement for

reinforced concrete work in (D) Columns, pillars posts and struts, upto floor two

level for Ground floor.

23 Providing and laying controlled cement concrete M-200 & curing complete 27.22 Cum 6560.96

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in Beam upto floor two level for G.F.

24 Providing and laying controlled cement concrete M-200 & curing complete 1.97 Cum 6602.50

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in Beam upto floor two level for F.F.

25 Providing and laying controlled cement concrete M-200 & curing complete 40.29 Cum 4877.29

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in Slabs, landing, cantilevers upto floor two level for

G.F. slab for Grade slab.

26 Providing and laying controlled cement concrete M-200 & curing complete 43.31 Cum 6658.93

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in Slabs, landing, cantilevers upto floor two level for

27 Providing and laying controlled cement concrete M-200 & curing complete 2.87 Cum 6700.47

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in Slabs, landing, cantilevers upto floor two level for

28 Providing I.S.I. Mark T.M.T. bar Fe-500D reinforcement for R.C.C. work 36967.63 Kg. 77.29

including bending, binding and placing in position complete upto all floor level.

29 Providing I.S.I. Mark T.M.T. bar Fe-500D reinforcement for R.C.C. work 2154.87 Kg. 78.34

including bending, binding and placing in position complete upto floor two level.

Extra for additional lift of reinforcing steel for all R.C.C. work above floor two

30 Providing and fixing M.S. Fan clamps type 1 to 16mm dia M.S. bar bent to 17.00 No. 136.75

shape with hooked ends to R.C.C. slabs curing, laying including painting the

exposed portion of loops, all as per standard design complete

31 Providing & fixing 35 mm thick Double shutter flush door solid core finished with 3.60 Sq.m. 9661.66

both side 1 mm thick laminationboth side like 'NOVAPAN 'or equivalent, of

natural wood grain shade as approved by this office having telephone

blackgranite 18 mm thick frame with double stone including fixed ventilation

above lintle level as per drg and as per theinstruction of Engineer in charge.with

necessary SS hinges and fixtures etc . complete. (For Main Door)

32 Providing & fixing 35 mm thick Single shutter flush door solid core finished with 21.30 Sq.m. 6576.11

both side 1 mm thick laminationboth side like 'NOVAPAN 'or equivalent, of

natural wood grain shade as approved by this office having telephone black

granite 18 mm thick frame with double stone including fixed ventilation above

lintel level as per drawing and as per the instruction of Engineer in charge with

necessary SS hinges and fixtures etc. complete.

33 Providing and fixing 30mm thick FACTORY MADE SOLID SINGLE SIDE 4.73 Sq.m. 2023.03

PRELAM PANEL PVC DOOR SHUTTER consisting of frame made out of M.S.

tubes of 19 gauge thckness and size of 19mm x 19mm for stiles,and 15mm x

15mm for top and bottom rails. The M.s.frame shall have coat of steel primers of

approved makde and manufacture. The M.S. frame shall be covered with 5mm

thick heat moulded single side prelim PVC „C‟ channel of size 30 x 50mm to

form stiles and 5mm thick and 75mm wide single side prelim PVC sheets

shallbe for the top, bttom and lock rails. Paneling of 5mm thick one side prelim

It. Description of Item Qty. Unit Rates in Total

No. Figure Amount

34 Providing and fixing window having extruded aluminum colour anodized section 47.25 Sq.m. 4260.18

frame main outer size 95mm x 24mm x 1.17mm (@ Wt. 0.738 Kg/mt),

horizontal three track member size 92mm x 31.75mm x 1.30mm (@ Wt.

Kg/mt), vertical member of size 92mm 31.75mm x 1.50mm (@ Wt. 1.06 Kg/mt)

with sliding shutters of horizontal member size 40mm x 18mm x 1.29mm (@ Wt.

of 0.456 Kg/mt), vertical member of size 40mm x 18mm x 1.29 mm (@ Wt. of

0.456 kg / mt) with 5 mm thick transparent bronze colour tinted float glass with

powder coated aluminum fittings and fixtures and transparent silicon sealant

glass fixing including granite frame as per details etc. complete.

35 Providing and fixing louvered type ventilators with powder coated aluminum 2.52 Sq.m. 13733.98

fittings and fixtures and Blur glass fixing to adjustable louvers and black granite

frame as per details and executed as per directed by Engineer in charge.

36 Providing and fixing M.S. hollow section box grills of required pattern to frames 308.91 Kg. 222.20

of windows or opening etc. with M.S. section of 2.5" x 2.5" square of Tata of

jindal section having finish with G.I. coated finish by zinc oxide and oil paint

including all labour and material as per directed by engineer incharge.

37 Providing and fixing M.S. grills of required pattern to wooden / Marble / Granite / 1345.52 Kg. 164.63

Stone frames of windows etc. with M.S. flats at required spacings and frame

alround, square or round bars with round headed bolts and nuts or by screws

(A) Ornamental Grill.

38 Providing and laying 24" x 24" vitrified 8 mm thick tiles flooring over 20mm 193.74 Sq.m. 1401.38

(average) base of cement mortar 1:6 (1 cement : 6 coarse sand) on new surface

or fixing on existing flooring by adhesive material including dismentaling of

existing flooring and jointed with color cement slurry including finished with flush

pointing & cleaning the surface etc. complete for anti skid.

39 Providing and laying Ceramic tiles 6mm thick in flooring treads of steps and 6.65 Sq.m. 981.57

landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse

sand ) finishing with flush pointing in white cement. (antiskid)

40 Providing and laying Marbo Granite tiles 8 to 10 mm thick, 24'' x 24'' in skirting, 99.31 Sq.m. 1195.02

risers of steps and dedo on 10mm thick cement plaster 1:3 (1 cement : 3 coarse

sand) and jointed with white cement slurry.

41 Providing and laying polished Kota stone slab flooring over 20mm (average) 23.12 Sq.m. 1019.39

thick base of cement mortar 1:6 (1-cement : 6 coarse sand) or L.M. 1.1.5 (1-

Lime putty :1.5 - coarse sand) laid over and jointed with grey cement slurry

mixed with pigment to match the shade of slab including rubbing and polishing

etc. complete. (A) 25mm thick

42 Providing and laying 18 mm thick machine cut, free edges, machine polished 49.63 Sq.m. 3325.93

Black Granite tread and risers in single piece with 1 cm nosing and necessary

grooves on treads etc. complete.

43 Providing and laying broken china mosaic flooring for terrace using 12 mm to 20 287.21 Sq.m. 779.70

mm broken pieces of glazed tiles to be laid over cement mortar 1:3 to plain or

slope and to be tempered to bring mortar creme out upto surface using white

cement including rounding off junctions and extending them upto 15 cm along

the wall, clearing with water and oxalic acid etc. as directed.

44 Providing and laying BBCC of 75mm thick layer in CM (1:3) including spraying 284.85 Sq.m. 626.20

two coat of water proofing chemical with selected brand by enginner in charge

i.e. perma or other with leveling complete for ready base of china mosaic

45 Providing and cement vata (10cm x 10cm size) quarter round in cement mortar 127.82 Rmt. 24.28

1:1 including neat cement finishing watering etc. complete.

46 Providing 20 mm thick double coat mala cement plasteron interior brick / 679.79 Sq.m. 283.95

concrete work for plastering comprising of base coat of 12 mm thick cement

plaster in cement mortar (1 Cement : 4 coarse sand) in roughfinishing and 8 mm

thick top coat of cement mortar 1:2 (1 Cement : 2 Coarse sand) finished with

trovel including scaffolding curing etc. complete.

It. Description of Item Qty. Unit Rates in Total

No. Figure Amount

47 Providing 15mm thick cement plaster in single coat on brick/concrete walls for 299.10 Sq.m. 201.44

interior plastering upto floor two level and finished even and smooth in cement

mortar 1:4 (1-cement : 4 sand) for ceiling.

48 Providing 20mm thick sand faced cement plaster on walls upto height 10 894.57 Sq.m. 374.87

metres above ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-

cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-sand)

49 Providing throating or plaster drip and moulding to R.C.C. Chhajja. 56.33 Rmt. 43.05

50 Applying two coats of putty & two coats of primer of approved brand and 541.48 Sq.m. 40.59

manufacture on new wall surface to give an even shade including thoroughly

brushing the surface free from mortar dropping and other foreign matter and

sand papered smooth.

51 Applying two coats of putty & two coats of primer of approved brand and 299.10 Sq.m. 42.77

manufacture on new wall surface to give an even shade including thoroughly

brushing the surface free from mortar dropping and other foreign matter and

sand papered smooth. (Ceiling Putty)

52 Wall painting two coats with plastic emulsion paint of approved brand and 541.48 Sq.m. 82.85

manufacture on wall surfaces to give an even shade including throughly

brushing the surface free from mortar droppings and other foreign matter and

sand papered smooth.

53 Finishing wall with weather proof exterior emulsion paint on wall surface (two 1395.55 Sq.m. 120.26

coats) to give an required shape even shade after thoroughly brushing surface

to remove all dirt, dust and remains of loose powdered materials etc. complete.

54 Wall painting two coats with plastic emulsion paint of approved brand and 299.10 Sq.m. 85.03

manufacture on wall surfaces to give an even shade including throughly

brushing the surface free from mortar droppings and other foreign matter and

sand papered smooth on ceiling.

55 Providing, laying and jointing in true line and level I.S.I. mark 40mm dia. U.P.V.C 31.00 Rmt. 148.12

pipe (Sch-40) for cold water including fitting as approved by Engineer in charge.

Pipe shall be fixed on the wall with held of clamp at every two meter c/c or shall

be concealed as directed including necessary fitting etc. including testing of pipe

and joints and fixing the same with adhesive solvent including cost of all

56 Providing, laying and jointing in true line and level I.S.I. mark 32mm dia. U.P.V.C 54.60 Rmt. 119.15

pipe (Sch-40) for cold water including fitting as approved by Engineer in charge.

Pipe shall be fixed on the wall with held of clamp at every two meter c/c or shall

be concealed as directed including necessary fitting etc. including testing of pipe

and joints and fixing the same with adhesive solvent including cost of all

57 Providing, laying and jointing in true line and level I.S.I. mark 15mm dia. U.P.V.C 26.00 Rmt. 72.65

pipe (Sch-40) for cold water including fitting as approved by Engineer in charge.

Pipe shall be fixed on the wall with held of clamp at every two meter c/c or shall

be concealed as directed including necessary fitting etc. including testing of pipe

and joints and fixing the same with adhesive solvent including cost of all

58 Providing and fixing concealed center point to wall, ceiling and floor I.S.I. mark 22.00 Rmt. 660.58

C.P.V.C. (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for

potable water of following dia. nominal bore tube fittings and clamps including

making good the wall, ceiling and floor etc. complete. (F) 50 mm dia.

59 Providing and fixing concealed center point to wall, ceiling and floor I.S.I. mark 15.00 Rmt. 253.82

C.P.V.C. (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for

potable water of following dia. nominal bore tube fittings and clamps including

making good the wall, ceiling and floor etc. complete. (B) 25 mm dia.

It. Description of Item Qty. Unit Rates in Total

No. Figure Amount

60 Providing, laying and jointing in true line and level I.S.I. mark 110mm diameter 63.00 Rmt. 876.90

U.P.V.C. SWR Type B pipe confirming to IS 13592 -1992 with one end plain and

other end socketed with rubbering & fitting confirming to ISI 14735-1999 of

approved make for drainage system pipe line, pipe shall be jointed with each

other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the

size 110mm diameter x 149mm length x 145mm high at every 2000mm center

to center or shall be concealed in wall as directed including necessary fitting

such as bends, shoes etc. including testing of pipe and joints and jointed with

adhesive solvent cement including cost of all materials.

61 Providing and fixing screw down bib taps of following size (A) Brass chromium 16.00 No. 186.83

plated screw down bib tap (i) 15mm dia. as approved by Engineer in charge for

62 Providing and fixing screw down bib taps of following size (A) Brass screw down 8.00 No. 214.81

bib tap polished bright (ii) 20mm dia. as approved by Engineer in charge for all

63 Providing and fixing pillar tap, capstan head screw down high pressure with 8.00 No. 354.69

screw, shanks and back nuts (B) 20mm dia. as directed by Engineer in charge.

64 Providing and fixing chromium plated brass half turn flush cock of approved 6.00 No. 263.77

quality including fixing in pipe line etc. complete. (ii) 25mm dia. as directed by

Engineer in charge.

65 Providing and fixing Gun metal check or non return full way wheel valve. 40 mm 3.00 No. 663.43

66 Providing and fixing Gun metal check or non return full way wheel valve. (C) 25 3.00 No. 420.63

67 Providing and fixing Kitchen sink with C.I. or M.S. brackets, painted white 2.00 No. 2326.66

including cutting holes in walls and making good the same but excluding fittings.

(C) Vitreous China Sink (i) 600mm x 450mm x 150mm size.

68 Providing and fixing wash basin with single hole for pillar tap with C.I. or M.S. 3.00 No. 1451.48

brackets painted white including cutting holes and making good the same but

excluding fittings. (A) Vitreous china (ii) Flat Back washbasin 550 mm x 400mm

size. (i) In white colour.

69 Providing and fixing C.P. brass towel rail complete with C.P. brass brackets 5.00 No. 616.42

fixed to wooden plugs with C.P. brass screws.(B) 600 mm x 20 mm size.

70 Providing and fixing C.P. brass shower rose with 15mm or 20mm inlet.(A) 2.00 No. 282.16

100mm dia. each

71 Providing and fixing 600mm x 450mm bevelled edge mirror of superior glass 3.00 No. 859.41

mounted on 6mm thick A.C. sheet or plywood sheet and fixing to wooden plug

with C.P. brass screws and washers.

72 Providing and laying wash down water closet (European type Wall hung W.C. 3.00 No. 9866.69

pan) Florentine series FLS-WHT 0111B including providing and fixing metropole

flush cock seat cover, jet wash etc. complete unit of jaquar branch (or

equivalent) including installing and fitting as per manufacturers standards by

skilled trained plumber including testing etc. complete quality and brand as

approved by Engineer in charge.

73 Providing, laying and jointing in true line and level I.S.I. mark 160mm diameter 37.00 Rmt. 834.38

U.P.V.C. (Type B) confirming to IS 13592 -1992 with one end plain and other

end socketed with rubbering & fitting confirming to ISI 14735-1999 of approved

make for drainage system pipe line, pipe shall be jointed with each other with

rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size

160mm diameter x 210mm length x 196mm high at every 2000mm center to

center or shall be concealed in wall as directed including necessary fitting such

as bends, shoes etc. including testing of pipe and joints and jointed with

adhesive solvent cement including cost of all materials.

74 Providing and fixing PVC SWR Nahni Trap IS 14735 for drain with jail of the 9.00 No. 586.27

following nominal diameter of self cleansing design with C.I. screwed down of

hinged grating including the cost of cutting and making good the walls. (i)

It. Description of Item Qty. Unit Rates in Total

No. Figure Amount

75 Providing and fixing S.W.gully trap with C.I. grating brick masonary chamber 5.00 No. 1292.19

and water tight C.I. cover with frame of 300mm x 300 mm size (inside) with

standard weight (i) square mouth traps (A) 100 mm x 100 mm size P type.

76 Providing and laying (two level or slopes) and jointing with stiff mixture of 20.00 Rmt. 317.46

cement mortar in proportion 1:1 salt glazed stone ware pipes following nominal

internal diametre including testing of pipes and joints etc. complete. 150 mm dia.

77 Constructing brick masonary chamber for under ground C.I. Inspection chamber 6.00 No. 2932.93

and bends with bricks having crushing strength not less than 35 Kg/cm2 in C.M.

1:5 C.I. cover with frame (light duty) 455 mm x 610 mm. internal dimensions,

total weight of cover with frame to be not less than 38 Kgs. weight of cover

Kg. and wt. of frame 15 Kg) R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse

sand : 4 graded stone aggregate 20 mm. size) foundation concrete 1:5:10 inside

plaster 15 mm. thick with cement mortar 1:3 finished smooth with a floating coat

of neat cement on walls & a bed concrete etc. complete. (i) inside dimension

455mm x 610 mm and 450mm deep for single pipe line.

78 Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1-cement :2-coarse 1.00 No. 11042.74

sand : 4-graded stone aggregate 20mm nominal size) foundation concrete 1:3:6

mix (1-cement : 3- coarse sand :6-Brick bats 40 + 50mm size) inside plastering

15mm thick with Cement Mortar 1:5 (1-Cement : 5-coarse sand) finished with a

floating coat of neat cement and making channels in cement concrete 1:2:4 mix

(1-Cement : 2-Coarse sand :4-stone aggregate 20mm nominal size) finished

smooth complete including curing and festing (i) Inside size 900mm x 1200mm

and 1.5M. deep including C.I. cover with frame size 560mm diameter total

weight of cover and frame to be not less than 128 kgs. (Wt. of cover 64 Kg. and

Wt. of frame 64 Kg.) (A) With 230mm thick walls of brick masonry using brick

having crushing strength not less than 35Kg. / Sq.cm. in Cement Mortar 1:5 (1-

Cement : 5 Coarse sand) (1) A type depth 0.90 Metre for 150mm diameter

79 Providing erecting and fixing double coated Syntex or equivalent PVC (I.S.I.) 3000.00 Litre 3.95

mark water tank of required capacity each with all necessary fittings &

connection etc. comp on terrace.

80 Providing and fixing ball cock of approved quality as directed. (A) Copper metal 2.00 No. 132.89

81 Providing and fixing 90 cm high Stainless steel railing made from anticorrosive 10.70 Rmt. 3162.31

S.S. pipe of 50 mm dia (16 Gauge) as hand rail with S.S. 38 mm dia. (16

Gauge) as a vertical support fixed in RCC slab at 1.2m c/c including three

horizontal S.S. pipes of 25 mm dia. (16 gauge) at equal distance fixed by

mm dia (16 gauge) S.S. pipe including accessories as per detailed drawing as

directed etc. complete.

82 Suplying and fixing the LED acric type name panel board as per design 2.70 Sq.m. 7070.00

approved by Engineer incharge.

83 Providing and laying sandwich type kitchen platform of size 2.10 x 0.76 x 0.76 m 8.21 Sq.m. 23811.76

and respected length with dhar polish or moulding having base 4" and support &

base with marble or kota as per site requirement also loft and base finish with

glaze tile and top with selected shed of marble or granite with gas pipe provision

and sink including all fittings, material and labour as per directed by Engineer

84 Clearing and grubbing road land including uprooting rank vegetation grass 0.23 Hect. 84256.00

bushes, shrubs, sapling and trees girth up to 300 mm removal of stumps of

trees cut earlier and disposal of unserviceable materials (A) By manual means in

area of light jungle.

85 Providing & fixing Co2 type portable ABC Dry Powder type ABS Fire 2.00 No. 3500.00

extinguisher capacity 4.5 Kg. discharge range 3mt. timing 60 to 180 sec.

standard approved IS code No. 2878:2004.

It. Description of Item Qty. Unit Rates in Total

No. Figure Amount

86 Providing and fixing M.S. grill entrance gate of predetermine design including all 11.34 Sq.m. 4341.59

material like hinges, roller, stopper, rail head, handle etc having coat of red lead

and painting with selected colour guide by engineer incharge.

87 Providing and fixing precast Rubber dye / steel dye inter locking concrete block 126.50 Sq.m. 706.80

60mm thick with grade of concrete M-300 pneumatic compressed / vibrated

mechanically and as per approved design confirming to IS 15658 :

including 35 mm sand layer for levelling and filling the joint with sand in proper

line and level as per guidelines of IRC : SP 63-2018 etc. complete.

88 Drilling of 215mm dia. bore in over burden strata (0-30) including lowering and 75.00 Mtr 343.00

fixing of 175 mm nominal dia UPVC pipe/175 mm dia ERW pipe upto required

depth and further drilling of 165mm dia bore hole in rocky strata by DTH rig.

89 Providing & supplying 175mm nominal dia. UPVC “CS” type pipe as per 30.00 Mtr 906.00

IS:12818 and as per detailed technical specification.

90 Electric motor driven borewell submersible pump set conforming to I.S. 8034 1.00 Set 18756.00

and motor conforms to IS-9283 working at 3 phase 400/440 volt 50 C/S A.C.

supply & 2900 R.P.M. discharge 240 LPM and 72 mtr Head, 7.5 hp Cat.

91 SITC of D.O.L starter up to 7.5 H.P. 1.00 Set 8383.00

92 Providing & supplying Flat PVC cable size 4.0 sq.mm as per IS 694 with BIS 60.00 Mtr 87.00

mark and as per detailed technical specification.

93 Heavy duty, 50 mm dia. G.I. Column pipe both end threaded having length 60.00 Mtr 537.00

approximate 3 mtr. confirming to IS 1239 (Part-1) with coupling at one end.

94 Providing, supplying and fitting ISI mark CI D/F Sluice Valves as per IS:14846 1.00 No. 2316.00

(Latest Edition) of following class and diameter including all taxes, insurance,

transportation, freight charges, octroi, inspection charges, loading, unloading,

conveyance to departmental stores, stacking etc. complete. PN-1 With hand

wheel /cap operated (PD type short body) 50 mm

95 Providing, supplying & fitting ISI mark CI D/F Reflux Valves as per IS:5312 1.00 No. 3307.00

(Latest Edition) of following class and diameter including all taxes, insurance,

transportation, freight charges, octroi, inspection charges, loading, unloading,

conveyance to departmental stores, stacking etc. complete. Reflux valves PN

1.0 IS 5312 with ISI mark 50 mm

96 Lowering of Submersible motor pump set complete with required nos and size of 1.00 Job 2500.00

Column pipe erected by means of proper chain pulley block & pipe wrenches

after checking of threads of each pipe with coupling to take the load of the

pumpset and pipe assembly filled up with water with trail testing..

97 Clamps made from MS plate with 3 holes on either side with nuts & bolts of 1.00 No. 560.70

standard make and suitable size 450 mm x 65 mm x 10 mm flat suitable to

98 Supply of TOP & BOTTOM accessories of 50 mm dia. 1.00 No. 1475.00

99 R&B Approved make ELCBs / RCCBs conforming to IS:12640 and having 1.00 No. 2611.00

sensitivity of 30 mA and Short Circuit with stand capacity of 10 KA and suitable

for operation on 3 phase and neutral 415V. having characteristic of quick action

& tripping with all advance feature & do not incorporate any electronic

component for following Max. rating erected as directed. 40 Amp. Cat.III

100 Electrical wiring & fitting charges of electric meter, 40Amp fuse, control panel 1.00 Job 2500.00

etc. including erection of the above items on wooden board, cost of material and

all liasioning work for getting electric connection from concerned Vij Company.

101 Pumping test of the tubewell by sub mersible pump of adequate capacity for 165 1.00 Job 17250.00

It. Description of Item Qty. Unit Rates in Total

No. Figure Amount

102 Providing and fitting readymade prefabricated portable chemicalized ferro 1.00 Job 12187.50

concrete mini panel having outer size 110 x 50 x 190 cm with necessary fitting

for electic panel mounting complete as per detailed specification and drawing.

103 Three Phase GEB power charges. 1.00 Job 14000.00

104 Constructing brick masonry chamber for underground C.I. Inspection chamber 1.00 No. 3660.76

and bends with bricks having crushing strength not less than 35Kg./cm2 in C.M.

1:5 C.I. cover with frame (Light duty) 455mm x 610mm internal dimensions total

weight of cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and

Wt. of frame 15Kg.) (R.C.C. top slab with 1:2:4 mix (1-cement :2- coarse sand

:4-graded stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster

15mm thick with cement mortar 1:3 finished smooth with a floating coat of neat

cement on walls and bed concrete etc. complete.(ii) Inside dimensions 500mm x

700 mm and 450mm deep for pipe line with one or two inlets.

105 Providing and laying C.I. steps 50cm x 15cm. 2.25cm. and Ci cover suitable 1.00 No. 6303.41

frame with necessary fixtures and joint and finish complete. (Including sump

step in staggered form including two coat of oil paint)

106 Providing and fixing of submersible motor of required quality and with control 1.00 No. 9595.00

panel of 1.00 HP etc complete with having outlet 25 mm dia.

107 Providing & fixing to wall, ceiling and floor galvanized mild steel tubes (medium 15.00 Rmt. 608.35

grade) of the following nominal bore, tube fittings and clamps including making

good the wall, ceiling and floor (E) 40mm.

108 Providing and laying cement concrete 1:5:10 (1-Cement : 5 fine sand :10 graded 18.00 Rmt. 213.71

stone aggregate 40mm nominal size) bedding for stoneware pipes of following

internal diameters with necessary formwork and curing complete.(B) 150mm

dia. (166mm avg. bed thickness)

109 Extra over item 24.1 for providing salt glazed stoneware fittings. (i) Bends of 5.00 No. 63.79

required degree (any radious) of following nominal diameters. (B) 150mm dia.

110 Providing and laying marble chips skirting (Terrazo) or dedo rubbed, and 40.77 Sq.m. 653.09

polished to Granolithic finish top layer 6mm thick with white, black or white and

black marble chips of size from smallest to 4mm nominal size laid in cement

marble powder mix 3:1 (3- cement : 1 marble powder by weight) in proportion of

4:7 (4-cement marble powder mix : 7-marble chips by volume) 20mm thick with

under layer 14mm thick cement plaster 1:3 (1-cement : 3-coarse sand) (A) Dark

shade pigment with ordinary cement (In top layer only)

111 Excavation for foundation for depth from 3.0 m to 5.0 m including sorting out 15.40 Cum 182.90

and stacking of useful materials and disposing off the excavated stuff upto

Meter lead (B) Dense or Hard soil.

112 Providing and laying controlled cement concrete M-150 for curing complete 3.10 Cum 4022.70

excluding cost of formwork and reinforcement for reinforced concrete work in (A)

Foundations, footings, base of columns and mass concrete.

113 Double half brick thick honey comb brick work with common burnt clay building 69.04 Sq.m. 323.00

bricks having crushing strength not less than 35 Kg/Sq.cm. (i) In cement mortar

1:4 (1 cement : 4 coarse sand)

114 Providing and fixing C.I. Manhole cover 0.60 M. x 0.45M. size having weight not 2.00 No. 958.17

less than 35 Kg.

115 Providing, laying (to level or slopes) and jointing reinforced concrete light duty 49.00 Rmt. 257.20

non-pressure pipes I.S. class NP-2 of the following internal diameter with collars

and butt ends prepared for collar joints including testing of joints complete. (B)

It. Description of Item Qty. Unit Rates in Total

No. Figure Amount

116 Constructing brick masonry chamber for underground C.I. Inspection chamber 2.00 No. 7180.44

and bends with bricks having crushing strength not less than 35 Kg/Cm2 in C.M.

1:5 C.I. cover with frame (light duty) 455mm x 610mm internal dimensions total

weight of cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and

Wt. of frame 15Kg.) (R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand :

4 graded stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster

15mm thick with cement mortar 1:3 finished smooth with a floating coat of neat

cement on walls and bed concrete etc. complete. (iii) Inside dimensions 600mm

x 850 mm and 450mm deep for pipe lines with three or more inlets.

117 Providing, laying (to level or slopes) and jointing reinforced concrete light duty 30.00 Rmt. 359.80

non-pressure pipes I.S. class NP2 of the following internal diameter with collars

and butt ends prepared for collar joints including testing of joints complete. (C)

118 Filling in foundation and plinth with brick bats, chhara in layers of 20cm. 6.20 Cum 621.50

thickness including watering, ramming and consolidating etc. complete.

119 Providing and fixing PVC SWR Nahni trap IS-14735 for drain - 75 mm diameter 10.00 No. 574.60

with jali of the following nominal diameter of self cleansing design with C.I

screwed down or hinged grating including the cost of cutting and making good

120 Providing, fixing and erecting steel shed including M.S. G.I. pipe (class-B), 57.28 Sq.m. 2020.00

framing of structure with hollow section and painting with two coats of oil paint

including priming coat. Rates including with necessary fabrication work including

cutting, welding, making holes by drilling machine & fixing in line and level of all

structure including cost of all laboures, fixtures, fastening and equipments etc.

121 Office Table :- 18mm thick three layer pre laminated particle board Work with 5.00 No. 23000.00

PVC edge band 2mm thick wrapped around the top, decorative aluminium

bidding in top and modesty including all necessary elements with necessary

features and fastning finish all as per directed by Engineer in charge. 6 FT Office

Table (Dimension :- 180 cm x 90cm x 75 cm) with suitable brand.

122 Revolving Chair :- Full-Back Executive Office Chair upholstered in bonded 5.00 No. 14750.00

leather and PVC, Padded seat and back for all-day comfort and support,

Pneumatic seat-height adjustment; 360-degree swivel; smooth-rolling casters

and having overall dimension 73.9D x 66.5W x 115.6H centimeters with Armrest

(Brown) with selected brand.

123 File Rack :- lack adjustable 5-Shelf Shelving Unit Storage Rack Utility Rack 5.00 No. 7700.00

Garage Shelves Display Rack Steel Boltless Rivet Rack, 60 inches Height 1-

Pack ({5 - SECTION } 5'[H] x 2'[L] x 1'[D]) with suitable brand.

124 Visiting Bench :- Chair Three Seater Waiting Area Chair Reception Chair 325- 2.00 No. 10700.00

350 Kg Weight Handling Capacity. Durable Parts and support, Our Chairs have

whole welded connections.

Product dimensions: Length (70 inches), Width (23 inches), Height (31 inches)

Color : Shining Silver, Material : Mild Steel (Iron), Finish: Chrome Finish, Style:

125 Steel Stool :- Office Stainless Steel Stool having minimum overall dimension 5.00 No. 1800.00

35.6D x 35.6W x 76.2H Centimeters, made with S.S. leg and rubber pad /

bushing with suitable brand which will select by engineer in charge.

126 Chair :- S.S. Chair for Office having seat and back with selected cushion, Fabric, 10.00 No. 2600.00

Pattern, PU with arm rest and minimum overall dimension 78.7D x 41.9W x

78.7H Centimeters with suitable brand which will select by engineer in charge.

It. Description of Item Qty. Unit Rates in Total

No. Figure Amount

127 Stainless Steel Office Almirah : Supply and installing Portable Modern double 5.00 No. 15000.00

Door steel almariah with nearer 30 kg wt having dimension 36 x 18 x 78.5 inch

made from SS, Eco friendly and UV resistant in grey color having minimum

partition for file rack and other department as per selected and directed by

Engineer incharge.

128 Providing, supplying and fixing the AC of 1.5 tonne of standard company i.e. 2.00 No. 45000.00

Blue star, Panasonic or equivalent as per manufacturer specification and select

by Engineer incharge

129 Providing and laying burnt brick masonary for super structure with ordinary 59.73 Cum 4658.90

portland cement mortar 1:5 proportion including providing scaffolding racking out

joints curing etc. complete for all leads and lifts. (Conventional Bricks) upto floor

130 Providing 20 mm thick sand faced cement plaster with Gutka on walls upto 581.48 Sq.m. 345.75

height 10 meters above ground level consisting of 12mm thick backing coat of

C.M. 1:3 (1 cement : 3 sand) and 8mm thick finishing coat of C.M. 1:1 (1cement

:1 sand) etc. complete including painting with two coats of water proof acrylic

emulsion paint to give an even shade.

131 Providing and laying and fixing 50 mm thick expansion joint by hydro cell semi 10.19 Sq.m. 1491.03

rigid UV resistance with high performance laminated closed cell polythene foam

joint filler in sheet foam as directed etc. complete.

132 Providing and fixing Barbed wire for Y shape fencing on existing coping / wall, 100.00 Rmt. 1179.58

Fencing made of galvanized steel wire of including all material like angle post

fixing in wall/coping of a size ISA 45 x 45 x 4 mm (1.5m C/C) with 150 x 150 x

mm base plate and anchor bolts M-12 - 4 nos on each plate and 4 nos of barbed

wire on each side including ring (9.38 kg/100 Rmt), Plate also covered by CC if

required and all section having coat of red lead and painting with selected colour

guide by engineer incharge.

133 Providing and fixing 1.20 Metre high fencing with 2.0 Metrelong M.S. Angle 29.00 Rmt. 391.93

posts 40mm x 40 mm x6 mm and oilpainting 3 coats fixed at 2.5 Mt,C/c. with

five Horizontanlines and two diagonals of galvanised steel barbed wire weighting

9.38 Kg. per 100 Metre, strained and fixed toposts with G.I,staples including

fixing the postsin groundwith 0.5 M x 0.5.M x 0.5 M. block in C.C1:5:10

134 Clearing and grubbing road land including uprooting rank vegetation grass 0.02 Hect. 28455.00

bushes, shrubs, sapling and trees girth up to 300 mm removal of stumps of

trees cut earlier and disposal of unserviceable materials (C) By mechanical

means in area of light jungle.

135 Providing, laying and spreading 150 mm Granular sub-base (Grade-I) by 23.00 Cum 982.73

providing close graded B.T.M.C. material in single layer with motor grader on

prepared surface, mixing by mix in place method with rotovator at OMC and

compacted with vibratory roller 80 to 110 KN static weight to achieve desire

density etc. completed.

136 Providing and laying compacted WBM of Grading-II MCBT metal of size 53 to 12.00 Cum 1429.15

22.4 mm in required layers including using 24% stone screening, 11.2 mm size

and 8% stone dust as filler including spreading watering & consolidation by

vibratory roller etc. as per MoRTH Specification complete as directed by

Engineer - in - charge.

137 Providing and filling in foundation with ordinary cement concrete M-100 mix and 12.00 Cum 3341.15

providing necessary vertical pin headers including formwork, vibrating, ramming

and curing complete.

It. Description of Item Qty. Unit Rates in Total

No. Figure Amount

138 Providing & casting in situ ordinary cement concrete M-250 mix with Trimix C.C. 30.00 Cum 5301.49

Road laid as directed including temping, vibrating, finishing, curing and filling in

joints with bitumen etc as per Engineer Incharge.

Electrical Items

139 Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) 43.00 Point 485.81

both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper

wires up to 10 mtr length, in below type of pipe erected with 6A Modular type

switch / bell push & accessories and earth continuity of following type, erected

on PVC / Metallic / Wooden box, single mounting base frame covered with

textured / metallic / white front plate modules erected on / in wall / ceiling as per

pipe erected, with necessary Lamp holder/ceiling rose / H.D. Connector as

directed. (f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete. Cat. III

140 Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both 17.00 Point 674.68

are of ISI marked 1.1 KV Grade FRLS PVC insulated multi strand copper wires

up to 10 mtr length, in below type of pipe erected with 6A Modular type switch

and hum free EME step type electronic fan regulator mounted and accessories

with earth continuity of following type erected on PVC / Metallic / Wooden box,

single mounting base frame covered with textured / metallic / white front plate

modules erected on / in wall / ceiling as per pipe erected with necessary ceiling

rose / H.D. Connector as directed. (f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling complete. Cat. III

141 Point wiring for Tissino / Modular secondary light point with 2-1.5 sq.mm & 8.00 Point 167.66

earth wire of 1.5 sq.mm (green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires, in below type of pipe to be erected

complete with earth continuity and necessary connection with primary light with

accessories erected on Metal / PVC / wooden box covered with 3 mm thick

PC(Polycarbonate) / Acrylic sheet for open / concealed wiring. with necessary

Lamp holder / ceiling rose / H.D.Connector as directed.(f) with medium class

Rigid PVC pipe and accessories erected concealed in wall/ceiling complete

142 Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are 7.00 Each 510.05

of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to

10 mtr length, in below type of pipe erected complete with Modular type switch &

5 pin Plug erected on PVC / Metallic / Wooden box covered with appropriate

front plate modules erected on / in wall / ceiling as per pipe erected with

following type of accessories. [I] For 6A Plug and 6 a switch with 2-1.5 sq.mm

Cu. Wire from nearby switchboard/mcb db board. (f) with medium class Rigid

PVC pipe and accessories erected concealed in wall/ceiling complete. Cat. III

143 Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin 26.00 Each 257.55

socket erected on PVC / Metallic / Wooden box, single mounting base frame

covered with textured / metallic / white front plate modules erected on / in wall /

ceiling with following type accessories. Cat. III

144 Providing following type of Modular Type Accessories mounted with PVC / 6.00 Each 160.59

metallic/Wooden box, single mounting base frame covered with textured /

metallic/white front plate , modules erected with necessary connections as per

site situation directed by Engineer In charge.(3) Two Pin/RJ-11 Telephone

Socket [A] For One Gang Cat. III

a (7) Blank Plate Single Cat. III 21.00 Each 25.25

b (8) Computer RJ-45 socket Cat. III 10.00 Each 160.59

c (9) 16 Amp. SP one way switch Cat. III 9.00 Each 180.79

d (10) 6/16Amp. Universal socket Cat. III 9.00 Each 199.98

145 Providing and erecting ISI mark Medium class RIGID PVC PIPES of following 192.00 Mtr 24.24

size complete to be erected on/in wall or ceiling erected with necessary PVC

fittings & Junction boxes fixed with adhesive solution & Clamps with following dia

of pipes, in approved manner as directed (a)20 mm

It. Description of Item Qty. Unit Rates in Total

No. Figure Amount

146 Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked 374.00 Mtr 82.82

stranded Copper conductor wire in following type of pipe to be erected

concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS

PVC insulated stranded wire of green colour for earth continuity of following size

(A) With medium class Rigid PVC pipe and accessories (b) 2 wire 2.5 sq. mm

147 providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked 125.00 Mtr 112.11

stranded Copper conductor wire in following type of pipe to be erected in / on

wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded

wire of green colour for earth continuity of following size (A) with medium class

Rigid PVC pipe and accessories (a) 2 wire 4 sq. mm

a (h) 4 wire 6 sq. mm 40.00 Mtr 260.58

148 Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 kv 9.00 Mtr 46.46

grade ISI marked copper wires of following size to be erected as directed. (e)

1.50 Sq.mm 3 core round PVC sheathed

149 Supplying & erecting approved make LAN cable of following size in existing pipe 150.00 Mtr. 47.47

as per direction [C] CAT -

150 Supplying & erecting approved make Telephone Cable electrolytic copper 90.00 Mtr. 20.20

conductor PE insulation twisted in two pairs, & wrapped with FRLS PVC tape &

sheathed with FRLS PVC or HFFR outer Jacket suitable for telephone wiring &

confirming to C-DOT erected in existing pipe. of following size of conductors &

nos.of pairs. With necessary connections.[A] Conductor Size 0.5 mm (a)

Unarmoured (2) Two Pairs

151 Providing & erecting main Distribution (MDF) indoor type, back mounted frame 1.00 Each 994.85

as per DoT standard approved with krone strips (a) Suitable for 10 pair

152 Providing & erecting Switch board for Computer or electric apparatus 5.00 Each 1133.22

consisting of following modular type accessories mounted with PVC / Metallic

concealed/open box with single mounting base frame covered with

textured/metallic /white front plate,modules erected with necessary connections

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug For Modular Type Accessories Cat. III

153 Decorative call bell Ting-tong box type 250 volts complete erected 1.00 Each 71.71

154 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 21.00 Each 373.70

Watt assembled on single MCPCB, with housing used as a heat sink shall be

made of thick sheet Steel conforming to IS: 513/CRCA/ aluminium die cast

powder coated and high U.V. & corrosion resistance with diffuser with company

mark/name 160V to 270V, Power Factor more than 0.95, THD < 15%,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.) (A) Tube Light with

integral driver (iv) 22-24 Watts, Surge - 2KV,IP-20, conventional 4 feet Cat. III

155 Supplying and erecting led lamps with following wattage capacity of 220 to 240 14.00 Each 112.11

voltage, minimum 15000 burning hours life, 500 V in built-surge

protection,Polycarbonate diffuser, mounting suitable for E14 / E27 / B22 lamp

holders, pf >= 0.5 (A) LED Lamps integral type, with PC diffuser suitable LAMP

holder (ii) 5 to 8 watts Cat. III

It. Description of Item Qty. Unit Rates in Total

No. Figure Amount

156 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 15.00 Each 427.23

Watt assembled on single MCPCB, with housing used as a heat sink shall be

made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die

cast powder coated and high U.V. & corrosion resistance with diffuser housed

in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.) (A) Square/ Circular

shaped Surface/Recessed Mount Downlight with provision for spring loaded

mounting clips complete.IP20 (ii) 11-15 watts, Surge-2 KV Cat. III

157 Supplying and erecting LED street light / Flood light fittings with High power 7.00 Each 3345.12

White LEDs wattage of 3 Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free High pressure die cast

aluminum housing with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses, with toughened glass

with company mark/name engraved or embossed 160 to 270 V,Power Factor

more than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45,

Luminaire efficacy> 100 lumens/watt . LED driver efficiency > 85 %.( fittings

required LM-79 & LM-80 certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The Engineer incharge may select

any wattage capacity between the ranges shown.) (A) Street Light (IP-65),

Surge protection -4KV integral and ,Light must have 440VAC line supply with

over-voltage protection. (i) above 36 to 48 watts Cat-lll

b (C) Post Top Lantern LED fitting comprises of finish cast aluminum spigot and 2.00 Each 3475.41

spun aluminum canopy fixed with opal polycarbonate, pipe arrangement for

vertical mounting driver and accessories wired upto terminal block.IP 65 (i)20-

158 Providing and erecting Approved make Four pole moulded case circuit breaker 1.00 Each 6173.12

having breaking capacity ICU of 25 KA. at 415 V,having normal current rating up

to 25 A to 100A. with Fixed thermal & magnetic release suitable to work on A.C.

supply 50 c/s. with all internal connections, spreader tinned copper & complete

erected in existing 16 G.M.S. housing. ICS=100% of ICU only Cat III

159 Supplying and erecting triple pole & neutral 440V / 500V panel mounting Copper 0.40 Rn. 1961.42

Busbars with four equal Nos. of electrolyte bus having current density not more Mtr.

than 1.6 Amp. / sq.mm (Rated current / cross section area) duly wrapped with

colour insulating tape for phase sequence of following current carrying capacity,

erected with necessary bus bar supports /insulators, main cable socket to each

bar, erected in existing cubical panel with necessary connections. (A) Suitable

for 100 Amp. Capacity

160 Supplying KITKAT pattern porcelain cut-out fuse with base of following current 3.00 Each 278.76

capacity erected on existing block board.(v) 100 A. 500 V.

161 providing and erecting Miniature circuit breaker single pole 0.5A to 2A system 9.00 Each 270.68

and having breaking capacity 10 KA to be erected in existing box. confirming to

IS 8828/1996 with ISI Mark Cat III

162 providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to 18.00 Each 112.11

operate on 240 V A.C. system and having breaking capacity 10 KA to be

erected in existing box. confirming to IS 8828/1996 with ISI Mark Cat III

163 Providing & erecting 240 V MCB double pole switch for motor & inductive load 4.00 Each 299.97

(C Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing box

having following capacity (A) 6 to 32 Amp. Cat III

164 Providing & erecting 415V MCB Four Pole Switch for Lighting Load (B curve) 2.00 Each 578.73

having 10KA breaking capacity & confirms to IS :8828 in existing box having

following capacity (A) 6 to 32 Amp. Cat III

165 Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C 3.00 Each 668.62

Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box

having following capacity (b)40 Amp. Cat III

It. Description of Item Qty. Unit Rates in Total

No. Figure Amount

b (c)63 Amp. Cat III 3.00 Each 737.30

166 Providing and erecting Sheet Steel powder coated MCB distribution board - flush 1.00 Each 2339.16

/ surface mounted fitted with busbar, neutral link, earth bar and DIN rail,

Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate

nos. of MCBs.(The DBs should be used of same company of MCB to be used)

suitable for (B) three phase incoming and single phase horizontal type outgoing

Per phase isolation type (PPI) (b) sheet steel double door (i)4 way

b (ii)6 way 1.00 Each 2913.85

167 providing and erecting Approved make RCCBs conforming to IS: 12640 and 3.00 Each 1969.50

having sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and

suitable for operation on single phase 240 V,50Hz. having characteristic of quick

action & tripping with all advance feature & do not incorporate any electronic

component. for following Max. rating erected as directed (i) 25 Amps.DP Cat III

b (ii) 40Amps. DP Cat III 3.00 Each 2235.13

168 Supplying & erecting earth pit of minimum bore dia.150mm size approved make 1.00 Each 4591.46

Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987

made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of 50mm

having 80-200 Micron galvanising, Inner pipe dia of 25 mm having 200-250

Micron galvanising, connection terminal dia of 12mm with constant ohmic value

surrounded by highly conductive compound with high charge dissipation suitable

for following type of applications with chamber and heavy duty cover.

(A)(approved make OEM has to submit test certificate including value of earth

resistance of installation duly stamped and signed by agency and officer

Incharge has to ensure the value of earthing resistane mentioned in test

Certificate) & having back filling compound of (B) Inner chemical (CCM

Compound)- Resistivity:- 0.2 ohm / meter testing as per IEC 62561-2017,

Voltage drop:- < 1 volt at no load & dry form, Sulphar content:- <2%(C) Back fill

Compound :- Earthing compound should be capable to retain moisture for long

time Necessary test report must be submitted by Agency. (a) For Electrical

Installation up to 440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

169 Providing & erecting weather proof, dust & vermin proof, floor mounted front 0.80 Sq. 11466.53

operated outdoor type double door cubical panel board necessary IP-54 and Mtr.

above protection as per approval from engineer incharge made from 14 SWG

thick CRC M.S. sheet for outer body & doors, 16 SWG thick CRC M.S.sheet for

internal partitions with necessary accesories , supporting angles/ flats channel

including cutting, bending, drilling, welding, riveting with internal partitions &

cable alley as per requirements & instruction of engineer-in-charge with erection

of supplied switch gears, BUSBARS, suitable size of inter connecting PVC

copper wire / copper-aluminium strips, rubber grommets, rib, bakelite control

fuses/MCB for measuring instruments, earth bus & earth bolts, foundation

flange - bolts-base Plates, sufficient nos. of hinged doors, handles with locking

arrangement and rubber gasket,heavy duty end terminal connection,danger

notice board,necessary ventilation,earthing strip complete. The Panel shall be

painted with epoxy powder coating. (The rates excludes the cost of switchgears,

bus bars, inter connecting mains & Copper Aluminium strips, meters, Fuses

etc. The dimension shall be measured excluding base beams) The panel shall

be supplied with following approved manufacturers with following size.(A) locally

fabricated panel board (i) with 350 mm depth

170 Supplying & erecting XLPE(IS:7098) (I)-88 ISI unarmoured Aluminium cable 1.1 146.00 Mtr. 75.75

KV.grade to be erected as directed of following size. (B)4 core 4 Sq. mm

171 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand 12.00 Mtr. 183.82

Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in

existing trench / pipe of following size of cables (A) 3 1/2 core 25 Sq. mm (

Sq. mm 1/2 core)

It. Description of Item Qty. Unit Rates in Total

No. Figure Amount

172 Providing and, fixing heavy duty flange type brass cable gland with rubber ring 18.00 Each 33.33

for PVC insulated armoured cable complete with out going tails, insulating tape

etc for following size of cables.(A) 2 to 4 core 2.5 / 4 Sq. mm

173 Providing and, fixing heavy duty flange type brass double compression type 2.00 Each 66.66

cable gland with rubber ring for PVC insulated armoured cable complete with out

going tails, insulating tape etc for following size of cables.(A) 3 & 1/2 / 4 core

174 Solder less crimping type Aluminium lugs conforming to IS suitable for cable of 72.00 Each 6.06

following size evenly crimped with high pressure tool & connected to switchgear

terminals with brass/cadmium plated nut bolts in an approved manner. (A) 1.5/

175 Making trench in soft soil of suitable width of 90 cm deep for laying cable or 25.00 Mtr. 55.55

locating the fault all over the run and back filling the same and making the

surface as normal ground.

176 Providing & laying approved make Double walled corrugated pipes (DWC) of 28.00 Mtr. 62.62

polyethylene(conforming to IS 14930 II )with necessary connecting accessories

of same material at required depth in existing trench for laying of cable. below

ground / road surface for enclosing cable (A)50 mm outer dia

177 Providing and erecting Approved make Ceiling fan with double ball bearing ISI 17.00 Each 1596.81

mark with condenser A.C. 23OV.50 c/s.1200 mm. sweep complete, canopy

erected on existing hook or clamp with earthing. [Make shall be approved by

Engineer in charge]

178 Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe 17.00 Mtr. 108.07

down rod erected duly painted for fan complete with proper insulation without

leakage and earthing.

179 Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to the 17.00 Each 108.07

RCC bars up to 50mm length each side and pierced through a 16 Gauge M.S.

box / Heavy Duty PVC box complete erected concealed in Ceiling with

necessary finishing.

180 Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or Fan box. 17.00 Each 18.18

181 Supplying & erecting approved make low noise decorative exhaust fan having 3.00 Each 1366.53

square frame ABS body with inbuilt lowers & square frame.250mm with

182 Supplying & erecting approved make SMC press moulded composite FRP. 1.00 Each 898.90

loop-in, loop-out approx. 2mm thick box complete with Bakelite connector strip

5way(3P+N+E),DIN rail for mounting mob & hinged doors as per requirement

having locking arrangements with mounting clamp with nuts, bolts & washers

suitable for erection on pole with cable clamps& earth bolt of following size of

box.(A) 300mm x 200mm x 100mm [deep]

b (C)150mm x 125mm x 100mm [deep] 9.00 Each 476.72

183 Supplying and erecting B class Galvanized iron pipe having smooth finished 7.00 Mtr. 215.13

bore of the pipe on both ends erected nuts and bolts along the pole / wall

shaping the pipe as per site requirement. Pipe dia as following.(B) 32 mm dia

184 Supplying & erecting approved make Digital time switch having lithium cell 6 1.00 Each 3168.37

years operative and operate battery backup 1 channel day clock with 14 memory

programme, suitable to operate on 240V + 5%, 16A with, floating contacts

Minimum switching setup time 1 minimum & LCD display. Also comprised

permanent ON/OFF switching. Programming switches & housed in fire proof

thermoplastic enclosure & transparent cover erected as required with necessary

connection erected as directed.

185 Supplying & erecting power contactor ,AC3 duty for time switch complete 1.00 Each 857.49

erected as per direction Cat III (C) 4 pole 440V 16 Amp.

It. Description of Item Qty. Unit Rates in Total

No. Figure Amount

186 Supplying and erecting approved make panel mounting type Digital Voltmeter 1.00 Each 1275.63

having 3 digits LED display, 0 to 750 AC Volts range erected on existing panel

board with all connection, wiring etc .with manufacturers calibration certificate.

187 Supplying and erecting approved make panel mounting type Digital Ammeter 1.00 Each 1558.43

having 3 digits LED display, external CT operated, calibrated for 0 to

Amps suitable to operate on 500 Volt AC , erected on existing panel board with

all connection, wiring etc .with manufacturers calibration certificate.

188 Supplying and erecting Ammeter / Voltmeter selector switch for 3 phase AC 2.00 Each 317.14

Supply 500 V on existing panel board with necessary connections.

189 Providing & erecting L.T. Current Transformer with bar primary 50/5 to 1000/5 3.00 Each 274.72

ratio 15 VA burden erected in existing CRCA box duly secured with insulating

materials connected to the meter

190 Supplying and erecting approved make suitable panel indicator LED type lamp, 3.00 Each 43.43

lens cover, complete erected with necessary connections.

i.e. Rs. One Crore Twenty two lacs Seventy Two thousand Eight hundred Eighty Six Rupees and Sixty Eight paisa only.

Deputy ExecutiveExecutive

Deputy Executive

I/We am/are willing to carry out the work @ ______________ % above/below percent (Should be written

in figures and words) of the estimated rate mentioned above. Amount of my /our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-

Charge for which no extra payment shall be made.

2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3. GST and Income tax TDS will be deducted at a source while making payments of bills.

4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-

10/2017 Cement Consumption/16/C, Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is

a change as per actual mix design the cost of difference of cement consumption have been deducted from the rate

of original item at the rate of input rate mentioned in all the tender.

5. The Contractor will have to submit the all required mix design at his own cost before execution as directed

and to be approved from the Engineer in charge.

Above all items of "Schedule-B" with Item Description, Unit, Rate & Amount have verified by me and

Deputy Executive Engineer Sr. Divisional Account Officer Executive Engineer

Panchayat (R & B) Sub Division, Panchayat (R & B) Division, Panchayat (R & B) Division,

Balasinor Lunavada Lunavada