IIP-Maintenance of Irrigation IB at Irrigation Quarters Campus Chalakudy

Amount

APPENDIX A

od32193/2019_2020/P2 : Providing .35 mm thick G.S trafford sheet roofing including vertical/curved surface fixed with self tapping steel screws 6mm dia. with bitumen and G>I limpet washers complete (upto any pitch in horizontal/ vertical or curved surface) excluding the cost of purlins, rafters and trusses and including cutting size and shape whrever required.

od32194/2019_2020/P2 : Ridge capping with pre painted galvanised steel sheets 0.5mm thick 60cm wide including all cost and materials conveyance labour charges etc. complete

od32195/2019_2020/P2 : 65mm G.I pipe for supporting the square tube

od32196/2019_2020/P2 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: for fixing the G.I1:1/2:3 (cement : 11/2 coarse sand : 3 graded stone aggregate 20 mm nominal size)

od32197/2019_2020/P2 : Providing and fixing PVC pipes, fittings, including fixing the pipe with clamps at 1.00 m spacing. 75 mm pipe for releasing water from rain water gutter.

od32198/2019_2020/P2 : Supplying and fixing 200mm dia ,4mm thickness PVC half cut section with brackets at the end of sheet for rain water collection including all cost and materials, conveyance, labour charges etc complete

10.16.1 : Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes

17.3.1 : Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid

50.17.1.4 : Supplying and fixing CP Health faucet good quality including cost of materials and labour charges etc. complete as per the direction of site engineer-in-charge.

9.118.1 : Providing and fixing to existing door frames24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness,fixed to the shutter styles by means of plastic/galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge( For W.C. and bathroom door shutter).

17.31 : Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

17.7.3 : Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps

od47655/2019_2020/P2 : Supplying Water heater for IB

od54301/2019_2020/P2 : Supplying and fixing Wall mixer with overhead shower including all fittings and labour charges

od43063/2019_2020/P2 : Supplying plastic chairs for IB

od43064/2019_2020/P2 : Supplying steel tables for IB

od43069/2019_2020/P2 : Supplying good quality curtains for IB

od49167/2019_2020/P2 : Supplying Induction cooker for IB

16.68 : Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.

11.20.4 : Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand).Ordinary cement without any pigment

od54190/2019_2020/P2 : Supplying Door mat of good quality

od54274/2019_2020/P2 : Refixing glass of Aluminium doors and windows with rubber gasket including cost of rubber gasket and all labour charges

AKHIL DAVIS

JOHNSON P.A.

Bidder Name

JOHNSON P.A.

N D JOHNSON

AKHIL DAVIS