Loading
Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹17.2 Cr
EMD Value
₹17.2 L
Closing Date
16 Nov 2026, 6:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Superintending Engineer, Project Implementation Unit, Health & Family Welfare Department.
Construction of New IPD Building at Smt. Maniben Government Ayurvedic Hospital Asarwa Ahmedabad.
356975
2026-27/89/01
Open
Civil Works
Works
Gandhinagar
1 document required · 1 mandatory
₹18,000
PIU-General Fund A/c 11-114
₹17.2 L
19 Oct 2026
19 Oct 2026
19 Oct 2026
16 Nov 2026
19 Oct 2026
Name of Work: Construction of New IPD Building at Smt Maniben Government Ayurvedic Hospital, Dist. Ahmedabad.
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
Clearing and grubbing road land including uprooting
rank vegetation grass bushes, shrubs, sapling and
Rupees Two And Paise
1 2,520.00 trees girth up to 300 mm removal of stumps of trees Smt 2.84
Eighty Four Only
cut earlier and disposal of unserviceable materials (C)
By mechanical means in area of light jungle
Excavation for foundation upto 1.5 m depth including
Rupees One Hundred
sorting out and stacking of useful materials and
2 2,914.00 Cumt. 149.67 Forty Nine And Paise Sixty
disposing off the excavated stuff upto 50 Meter lead.
(B) Dense or Hard soil
Excavation for foundation for depth from 1.5 m to
Rupees One Hundred
m including sorting out and stacking of useful
3 1,544.00 Cumt. 162.38 Sixty Two And Paise
materials and disposing off the excavated stuff upto
Thirty Eight Only
Meter lead. (B) Dense or Hard soil
Excavation for foundation for depth from 3.0 m to
Rupees One Hundred
m including sorting out and stacking of useful
4 104.00 Cumt. 174.23 Seventy Four And Paise
materials and disposing off the excavated stuff upto
Twenty Three Only
Meter lead. (B) Dense or Hard soil
Filling available excavated earth (excluding rock) in
trenches, plinth, sides of foundations etc. in layers not Rupees One Hundred
5 3,740.00 exceeding 20 cm. in depth consolidating each Cumt. 130.39 Thirty And Paise Thirty
deposited layer by ramming and watering upto Nine Only
optimum moisture content level.
Filling in plinth with murrum or selected soil in layers
Rupees Two Hundred
of 20 cm. thickness including watering, ramming and
6 756.00 Cumt. 289.06 Eighty Nine And Paise Six
consolidating upto optimum moisture content level.
Filling in plinth with sand under floors including Rupees Four Hundred
7 179.00 watering, ramming, consolidating and dressing etc. Cumt. 460.19 Sixty And Paise Nineteen
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
Providng & doing dry Rubble soiling, voids filled with
stone chips and screened with murrum including
compaction with mechanical vibratory compactor, Rupees One Thousand
sprinkling of water required for compaction, for Eight Hundred Sixty Five
substructure & superstructure as per IS:1597, part-1 And Paise Forty Seven
in line and level etc complete. Rate to include all Only
material, labour, tools & tackles, etc, complete as per
Engineer in charge.
Providing and laying cement concrete work 1:2:4 (1-
Rupees Three Thousand
Cement:2- Coarse sand: 4- graded stone aggregates
9 727.00 Cumt. 3,960.49 Nine Hundred Sixty And
mm nominal size) and curing complete including cost
Paise Forty Nine Only
of formwork in (A) Foundations and plinth
Providing and laying in position control cement
concrete mix M-300 grade for reinforced cement
concrete work, using cement content as per approved
design mix including pumping of concrete to site of
laying, cost of Centering, shutterings, finishing,
grouting if required, admixture in recommended Rupees Five Thousand
10 958.00 proposition as per IS:9103 to accelerated, retard, Cumt. 5,362.36 Three Hundred Sixty Two
setting of concrete, improve workability as per And Paise Thirty Six Only
direction of engineer in charge and approved, rates
includes all levels, heights as specified, excluding
reinforcement. (No extra will be paid in variation of
cement level, minimum cement level will be as per IS
456): (A) Footing
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
Providing and laying in position control cement
concrete mix M-300 grade for reinforced cement
concrete work, using cement content as per approved
design mix including pumping of concrete to site of
laying, cost of Centering, shutterings, finishing,
Rupees Five Thousand
grouting if required, admixture in recommended
Three Hundred Forty
11 252.00 proposition as per IS:9103 to accelerated, retard, Cmt 5,348.62
Eight And Paise Sixty Two
setting of concrete, improve workability as per
direction of engineer in charge and approved, rates
includes all levels, heights as specified, excluding
reinforcement. (No extra will be paid in variation of
cement level, minimum cement level will be as per IS
456): Grade Slab
Providing and laying in position control cement
concrete mix M-300 grade for reinforced cement
concrete work, using cement content as per approved
design mix including pumping of concrete to site of
laying, cost of Centering, shutterings, finishing,
grouting if required, admixture in recommended
Rupees Seven Thousand
proposition as per IS:9103 to accelerated, retard,
Nine Hundred Nineteen
12 358.00 setting of concrete, improve workability as per Cumt. 7,919.83
And Paise Eighty Three
direction of engineer in charge and approved, rates
includes all levels, heights as specified, excluding
reinforcement. (No extra will be paid in variation of
cement level, minimum cement level will be as per IS
456 (rates for centering, shuttering, formwork staging
scaffolding for considering up to 4.50m height): (B)
Column All Floor
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
Providing and laying in position control cement
concrete mix M-300 grade for reinforced cement
concrete work, using cement content as per approved
design mix including pumping of concrete to site of
laying, cost of Centering, shutterings, finishing,
grouting if required, admixture in recommended
proposition as per IS:9103 to accelerated, retard, Rupees Seven Thousand
13 253.00 setting of concrete, improve workability as per Cumt. 7,440.75 Four Hundred Forty And
direction of engineer in charge and approved, rates Paise Seventy Five Only
includes all levels, heights as specified, excluding
reinforcement. (No extra will be paid in variation of
cement level, minimum cement level will be as per IS
456 (rates for centering, shuttering, formwork staging
scaffolding for considering up to 4.50m height): (D)
RCC Wall up to all Floor.
Providing and laying in position control cement
concrete mix M-300 grade for reinforced cement
concrete work, using cement content as per approved
design mix including pumping of concrete to site of
laying, cost of Centering, shutterings, finishing,
grouting if required, admixture in recommended Rupees Six Thousand
14 229.00 proposition as per IS:9103 to accelerated, retard, Cumt. 6,711.35 Seven Hundred Eleven
setting of concrete, improve workability as per And Paise Thirty Five Only
direction of engineer in charge and approved, rates
includes all levels, heights as specified, excluding
reinforcement. (No extra will be paid in variation of
cement level, minimum cement level will be as per IS
456): (C) Tie Beam, ground Beam, plinth Beam
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
Providing and laying in position control cement
concrete mix M-300 grade for reinforced cement
concrete work, using cement content as per approved
design mix including pumping of concrete to site of
laying, cost of Centering, shutterings, finishing,
grouting if required, admixture in recommended
Rupees Six Thousand
proposition as per IS:9103 to accelerated, retard,
Eight Hundred Forty
15 919.00 setting of concrete, improve workability as per Cumt. 6,843.33
Three And Paise Thirty
direction of engineer in charge and approved, rates
includes all levels, heights as specified, excluding
reinforcement. (No extra will be paid in variation of
cement level, minimum cement level will be as per IS
456 (rates for centering, shuttering, formwork staging
scaffolding for considering up to 4.50m height): (E)
Floor Beam upto all Floor.
Providing and laying in position control cement
concrete mix M-250 grade for reinforced cement
concrete work, using cement content as per approved
design mix including pumping of concrete to site of
laying, cost of Centering, shutterings, finishing,
grouting if required, admixture in recommended
proposition as per IS:9103 to accelerated, retard, Rupees Six Thousand Six
16 34.00 setting of concrete, improve workability as per Cumt. 6,641.84 Hundred Forty One And
direction of engineer in charge and approved, rates Paise Eighty Four Only
includes all levels, heights as specified, excluding
reinforcement. (No extra will be paid in variation of
cement level, minimum cement level will be as per IS
456 (rates for centering, shuttering, formwork staging
scaffolding for considering up to 4.50 mt.height) (C)
RCC Weathershed upto all Floor.
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
Providing and laying in position control cement
concrete mix M-250 grade for reinforced cement
concrete work, using cement content as per approved
design mix including pumping of concrete to site of
laying, cost of Centering, shutterings, finishing,
grouting if required, admixture in recommended
proposition as per IS:9103 to accelerated, retard, Rupees Six Thousand
17 178.00 setting of concrete, improve workability as per Cumt. 6,866.96 Eight Hundred Sixty Six
direction of engineer in charge and approved, rates And Paise Ninety Six Only
includes all levels, heights as specified, excluding
reinforcement. (No extra will be paid in variation of
cement level, minimum cement level will be as per IS
456 (rates for centering, shuttering, formwork staging
scaffolding for considering up to 4.50m height) (C)
RCC Lintel/ Sill bend up to all Floor
Providing and laying in position control cement
concrete mix M-300 grade for reinforced cement
concrete work, using cement content as per approved
design mix including pumping of concrete to site of
laying, cost of Centering, shutterings, finishing,
grouting if required, admixture in recommended
Rupees Seven Thousand
proposition as per IS:9103 to accelerated, retard,
Four Hundred Ninety
18 961.00 setting of concrete, improve workability as per Cumt. 7,493.77
Three And Paise Seventy
direction of engineer in charge and approved, rates
includes all levels, heights as specified, excluding
reinforcement. (No extra will be paid in variation of
cement level, minimum cement level will be as per IS
456 (rates for centering, shuttering, formwork staging
scaffolding for considering up to 4.50m height) (C)
RCC Floor Slab all floor level
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
Providing and laying in position control cement
concrete mix M-300 grade for reinforced cement
concrete work, using cement content as per approved
design mix including pumping of concrete to site of
laying, cost of Centering, shutterings, finishing,
grouting if required, admixture in recommended
proposition as per IS:9103 to accelerated, retard, Rupees Seven Thousand
19 41.00 setting of concrete, improve workability as per Cumt. 7,009.33 Nine And Paise Thirty
direction of engineer in charge and approved, rates Three Only
includes all levels, heights as specified, excluding
reinforcement. (No extra will be paid in variation of
cement level, minimum cement level will be as per IS
456 (rates for centering, shuttering, formwork staging
scaffolding for considering up to 4.50m height) (C)
RCC Stair Case up to all floor level
Providing TMT Bar FE 500D reinforcement for R.C.C.
Rupees Seventy Eight And
20 5,07,105.00 wor including bending, binding and placing in position KG 78.21
Paise Twenty One Only
complete upto floor all level
Applying general insecticide pest control treatment to
floors, cupboards etc including labour materials etc.
complete. Using Imidacloprid 30.5 SCas Per IS
Rupees Eighty Nine And
21 1,680.00 part -II (0.075% concentration by mass) is Sqmt. 89.28
Paise Twenty Eight Only
recommended 10.5ml chemical diluted with 5 liters of
water application 0.5 litre chemical/ Sqm of surface is
recommended as per I.S.
Brick work using common burnt clay building bricks
having crushing strength not less than 35 kg/ Sq. Cm. Rupees Four Thousand
22 181.00 in foundation and plinth in cement mortar 1:6 (1 Cumt. 4,021.02 Twenty One And Paise
cement: 6 fine sand) Up to Plinth level (B) Two Only
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
Masonary work using Aerated light weight concrete
Rupees Four Thousand
block having crushing strength not less than 35 kg/
Eight Hundred Forty
23 1,629.00 sqcm for super structure above plinth level upto floor Cumt. 4,843.73
Three And Paise Seventy
two level in cement mortar 1:5 (1 cement: 5 fine sand)
complete as per Technical Specification All Floor
10mm thick cement plaster in single coat on fair side
of brick/ concrete wall for interior plastering upto
Rupees Two Hundred One
24 12,591.00 floor two level finished even and smooth in C M 1:4 (1 Sqmt. 201.63
And Paise Sixty Three Only
cement 4 coarse sand) including floating coat of neat
cement including finishing etc complete. all Floor
Providing & fixing 15 mm cement plaster in single
coat on brick/ concrete wall for interior plastering Rupees Two Hundred
25 17,617.00 finished even and smooth in cement mortor 1:4 (1 Sqmt. 219.41 Nineteen And Paise Forty
cement: 4 coarse sand) including mala plaster of neat One Only
cement including finishing etc complete. All floor
20mm thick sand faced cement plaster on walls upto
any height above ground level consisting of 12mm
Rupees Three Hundred
26 245.00 thick backing coat of C.M. 1:3 (1-cement: 3-sand) and Sqmt. 300.66
And Paise Sixty Six Only
8mm thick finishing coat of C.M. 1:1 (1-cement:1-
sand) etc. complete.
Providing 20 mm thick double coat mala cement
plaster on interior brick/ concrete work for plastering
comprising of base coat of 12 mm thick cement plaster Rupees Two Hundred
27 4,466.00 in cement mortar (1 Cement: 4 coarse sand) in rough Sqmt. 272.48 Seventy Two And Paise
finishing and 8 mm thick top coat of cement mortar Forty Eight Only
1:2 (1 Cement:2 Coarse sand) finished with trovel
including scaffolding curing etc. complete.
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
Providing and applying 2mm thick Texture Plaster of
Earthen Textures, Travertino Texture, Coral texture or
equivalent make incorporating fine filaments made of
Rupees Seven Hundred
polymer and aggregating natural stone powder with
28 4,466.00 Sqmt 755.88 Fifty Five And Paise Eighty
making grooves on existing base coat of 20 mm thick
smooth mala plaster etc. Complete in any shade as
approved by Architect/ Engineer in charge for all floor
Providing and fixing chiken mesh jali with square of
12.50 x 12.50 mm of 25 gauge at junction the
Brick.masonary and reinforcement cement concrete
member including fixing materials scaffolding labour Rupees Two Hundred
29 1,511.00 etc. complete the junction of 2 different surfaces of Sqmt. 249.95 Forty Nine And Paise
different material component at the time of plastering Ninety Five Only
to prevent cracking in plaster surface as and where
directed at all floors with all leads and lifts
Providing throating or plaster drip and moulding to Rmt. Rupees Forty One And
rcc chhajja for all floor. Paise Sixty Six Only
Filling in foundation and plinth with brick Bats Chhara
Rupees Six Hundred And
31 125.00 in layers of 20 cm. thickness including watering, Cmt 600.56
Paise Fifty Six Only
remming and consolidating etc. complete.
Providing 15 mm thick water proof cement plaster
using water proofing powder 1Kg/ 1bag of cement for
Rupees Two Hundred
all floors on brick/ concrete wall work using water
32 683.00 Smt 242.22 Forty Two And Paise
proofing materials in C M 1: 3 (1 cement 3 coasrse
Twenty Two Only
sand) including finishing with a flooting coat of neat
cement slurry etc complete.
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
Applying two coats of putty & two coats of primer of
approved brand and manufacture on new wall surface
Rupees Forty And Paise
33 27,819.00 to give an even shade including thoroughly brushing Sqmt. 40.59
Fifty Nine Only
the surface free from mortar dropping and other
foreign matter and sand papered smooth.
Providing and applying Wall painting (three coats)
with plastic emulsion paint of approved brand and
manufacture on under coated wall surface to give and Rupees One Hundred
34 27,819.00 even shade including throughly brushing the surface Sqmt. 112.95 Twelve And Paise Ninety
free from mortor droppings and other foreign matter Five Only
and sand paperd smooth on new work to give an even
shade.for all height
Finishing wall with weather proof low velocity ultima
exterior emulsion paint on wall surface (two coats) to Rupees One Hundred
35 4,717.00 give an required shape even shade after thoroughly Sqmt. 114.53 Fourteen And Paise Fifty
brushing the surface to remove all dirt, and remains of Three Only
loose powdered materials.etc complete for all height
Wall Painting (two coats) with antibacterial
polyrethane epoxy paint approved brand and
manufacture on internal walls to give an even and Rupees Three Hundred
36 325.00 smooth surface. Thoroughly brushing the surface free Sqmt. 368.68 Sixty Eight And Paise Sixty
from mortar dropings and other rorieng matte and Eight Only
sand papered smooth etc completed as directed by
Architect/ Engineer in charge.
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
Providing and fixing 35 mm.thick Double Shutter flush
door having factory fabricated std. Extruded
aluminium colour anodized hollow section19552
weight is not less than 1.1 Kg./mtr {Section 63.50 x
mm x 2.50 mm thick } for door frame, hollow portion
of door frame shall be filled with wood to be insert for
durable grip of door hinges, with factory made 35 Rupees Five Thousand Six
37 150.00 mm.thick Double Shutter flush door Solid Core Sqmt. 5,601.17 Hundred One And Paise
Finished with both side 1mm laminated Sheet with 6 Seventeen Only
Lever Mortice lock, SS Aldrop 30cm long, SS Handle
size 30 Cm Long, Tower Bolt size 20 cm etc. as per
detail colour & pattern apporoved by this office
including necessary anodized alluminum fixtures and
fastenings as per approved by Architect/ Engineer in
Providing and fixing door having side hung single
shutter having factory fabricated std. Extruded
aluminium colour anodized hollow section {Section
63.50 x 38 mm x 2.50 mm thick } for door frame,
hollow portion of door frame shall be filled with non
teakwood wood, with factory made 35 mm. Thick Rupees Five Thousand
38 349.00 flush door both side 1 mm thick pre laminated with6 Sqmt. 5,709.81 Seven Hundred Nine And
Lever Mortice lock as per detail, SS tadi size 25 cm Paise Eighty One Only
long and 16mm dia, SS Aldrop size 25cm, SS Handle
size 15 Cm Long, SS Tower Bolt size 20 cm etc. colour
& pattern apporoved by this office including necessary
anodized alluminum fixtures and fastenings as per
approved by Architect/ Engineer in charge.
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
Providing and fixing of approved make radiation proof
lead line door with galvanised steel. Recommended
lead door design should be sandwich type panel with
both side GI Sheet with minimum 2mm Lead infill.
Doors should be finished in Powder Coating with film
thickness of 60 microns approx. in desired RAL
Shades. The manufacturer company must b ISO 9001-
2015 certified. Door frame is Single rebate profile of
minimum size 120mm X 57 mm made out of 1.6 mm
minimum thick galvanized steel sheet & with 2mm
lead infill. 120x57 Frames shall be Mitred jointed and
field assembled with inbuild groove gasket. The Rupees Thirty Three
frames is finished with Powder Coating in desired RAL Thousand Eight Hundred
39 6.00 Shade. Frame having provisions and necessary Sqmt. 33,811.77
Eleven And Paise Seventy
reinforcement for receiving appropriate hardware like Seven Only
lock and hinges. Frames will be provided with back
plate bracket to receive anchor fasteners for
installation on a finished plastered wall opening.
Frames shall be mitred and field assembled with self
tabs. Frames to have inbuild grooved sealing system
and shall be site fitted with Silicon gasket as standard.
All provision should be mortised, drilled and tapped
for receiving appropriate hardware. Door leaf shall be
minimum 46mm thick fully flush double skin door
with or without vision lite. Door leaf shall be
manufactured from 1.0 mm thick galvanised steel
sheet. The internal construction of the door should be
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
Providing & fixing in position Domal 40 mm JINDAL
Openabel Series Fully paneled or Partly glazed &
partly paneled coloured anodized 15 micron
aluminium single/ Double leaf door standard section
(Jindal or Equivalent) for frame Door outer frame
X2771 CODE (48.3 mm X 40 mm X1.5 mm -.756
Kg./m), mullion X2930 (70.1mm X 40 mm X1.5 mm -
.95Kg./m), door shutter X2773 (93 mm X 50 mm X1.5
mm -1.133 Kg./m), bottom section -X2777 (100.2 mm
X 50 mm X1.5 mm -1.1375 Kg./m), bottom seal profile Rupees Eight Thousand
X2776(32.85 mm X 26.50 mm X1.25 mm -0.373 Seven Hundred Forty
Kg./m), centre meeting profile X2775(60.75 mm X 40 Eight And Paise Sixty Two
mm X1.50 mm -0.901 Kg./m) and clip X2932 (25.30 Only
mm X 19.25 mm X1.27 mm -0.368 Kg./m) 5 mm thick
laminated compact sheet, 5 mm thik glass (Modi float
or saint gobain brand at Top& bottom panel fix by
glazing clips including providing & fixing S.S. handle &
stopper, aldrop & mortise lock, SS screw with fixture
& fastening including cutting the flooring, making
good etc. all required materials labours and
equipments with fixing as per detailed drawing or as
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
Providing and fixing Three Track Domal window
having extruded aluminum Colour anodized
micron Sliding section outer frame size 80 mm x
mm weight 1.555 Kg./m (Jindal Section code:21376)
and shutter frame 27 mm x 65 mm weight
Rupees Five Thousand
Kg./m (Jindal Section code:21490) and Section inner
Two Hundred Forty Eight
41 288.00 patti size 38.70 mm x 28.50 mm weight 0.303 Kg./m Smt 5,248.97
And Paise Ninety Seven
(Jindal Section code 19453), mosquito jali channel -
mm x 15 mm x1.20 mmx1.20 mm weight.118 Kg./m
(jindal section code 15784) with 5 mm clear Frosted
Glass (Modi or Saint Gobain) and including all
accesible accesories complete etc. or as directed
Engineer in charge.
Providing and fixing Two Track Domal window having
extruded aluminum Colour anodized Sliding section
outer frame size 45mm x 45 mm weight 1.004 Kg./m
and shutter frame 27 mm x 65 mm weight
Rupees Five Thousand
Kg./m and Section inner patti size 38.70 mm x
Three Hundred Seventy
42 252.00 mm weight 0.303 Kg./m with mosquito jali channel - 9 Smt 5,374.21
Four And Paise Twenty
mm x 15 mm x1.20 mmx1.20 mm weight.118 Kg./m
(jindal section code 15784) with 5 mm clear glass
(Modi or Saint Gobain) including all accesible
accesories complete etc.as per detailed drawing or as
Providing and fixing standared extruded of domal
alluminium section of size 50 mm x 25 mm x 1.2mm
Rupees Two Thousand
(Jindal or equivalent) with colour anodized 60 micron
43 78.00 Smt 2,186.65 One Hundred Eighty Six
alluminium frame for ventilation with 5 mm thick
And Paise Sixty Five Only
frosted glass with louvers as details etc complete for
Ventilation as per detailed drawing or as direct EIC.
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
Provding and fixing M.S. plain grills of required
pattern with M.S. flats at required spacings & frame Rupees One Hundred
44 12,356.00 around, sequare or round bars with round headed KG 128.27 Twenty Eight And Paise
bolts and nuts or by screws including applying a Twenty Seven Only
priming coat of red lead paint two coat of Oil paint.
Provide and fix heavy-duty stainless steel (S.S.) door
closer of approved make and capacity suitable for the
size and weight of the door, as directed by the
Engineer-in-Charge. The door closer shall be fixed
strictly in accordance with the manufacturer’s
specifications and recommended installation method.
The fixing plate/ body shall be mounted on the door
frame or shutter using appropriate screws and
fasteners, ensuring firm and secure anchorage without
damaging the door surface. The arm shall be properly
connected between the door frame and shutter,
Rupees One Thousand
maintaining correct alignment and angle to ensure
45 134.00 Each 1,282.70 Two Hundred Eighty Two
smooth and efficient operation. Necessary
And Paise Seventy Only
adjustments shall be made to regulate the closing
speed, latching speed, and back-check (if applicable),
ensuring noiseless and controlled closing of the door
without slamming. All accessories, brackets, screws,
and fixtures required for complete installation shall be
provided and fixed. The installed door closer shall be
tested for proper functioning, and any defects or
misalignment shall be rectified. The work shall include
all heights, locations, leads, lifts, tools, and tackles,
complete in all respects as per the direction of the
Engineer-in-Charge.
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
Providing and fixing factory made single extruded
WPC (Wood Polymer Composite) solid door/
window/ Ceosetory windows & other Frames/
Chowkhat comprising of virgin PVC polymer of K
value 58- 60 (Suspension Grade), calcium carbonate
and natural fibers (wood powder/ rice husk/ wheat
husk) and non toxic additives (maximum oxicity index
of 12 for 100 gms) fabricated with miter joints after
star headed S.S. screws having minimum frame
density of 750 kg/ cum, screw withdrawal strength of
2200 N (Face) & 1100N (Edge), minimum
compressive strength of 58 N/ mm2, modulus of
elasticity 900 N/ mm2 and resistance to spread of Rupees Six Hundred Forty
46 715.00 flame of Class A category with property of being Rmt 647.41 Seven And Paise Forty
termite/ borer proof, water/ moisture proof and fire One Only
retardant and fixed in position with M.S hold fast/
lugs/ SS dash fasteners of required dia and length
complete as per direction of Engineer-In- Charge. (M.S
hold fast/ lugs or SS dash fasteners shall be paid for
separately). Note: For WPC solid door/ window
frames, minus 5mm tolerance in dimensions i.e depth
and width of profile shall be acceptable. Variation in
profile dimensions on plus side shall be acceptable but
no extra payment on this account shall be made.
applying PVC solvent cement and screwed with full
body threadedComplete as per direction of Engineer-
in-Charge. (1) Frame size 45 x 70 mm
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
Providing and fixing factory made single extruded
WPC (Wood Polymer Composite) solid plain flush
door shutter of required size comprising of virgin
polymer of K value 58-60 (Suspension Grade), calcium
carbonate and natural fibers (wood powder/ rice
husk/ wheat husk) and non toxic additives (maximum
toxicity index of 12 for 100 gms) having minimum
density of 650 kg/ cum and screw withdrawal
Rupees Three Thousand
strength of 1800 N (Face) & 900N (Edge), minimum
47 241.00 smt 3,749.12 Seven Hundred Forty Nine
compressive strength 50 N/ mm2, modulus of
And Paise Twelve Only
elasticity 850 N/ mm2 and resistance to spread of
flame of Class A category with property of being
termite/ borer proof, water/ moisture proof and fire
retardant and including stainless steel butt hinges of
required size with necessary full body threaded star
headed counter sunk S.S screws, Handles, Stopper,
Door closer, Tower bolt all as per direction of
Engineer-In- Charge. (1) 30 mm thick
Providing and fixing of approved make Trap door with
galvanised steel. Doors should be finished in Powder
Coating with film thickness of 60 microns approx. in
desired RAL Shades. The manufacturer company must
Rupees Five Thousand
be TUV Nord ISO 9001-2015 certified ACODOR
One Hundred Twenty
48 10.00 (koleshvari Infra) trap door and must be made from Smt 5,123.73
Three And Paise Seventy
galvanised steel sheet. door must be concealed type of
hinges and appropriate provision for hanging from
celling. appropriate locking must be provided.frame
and door must made from minimum 1 mm glavanised
steel as per detailed drawing or as direct EIC.
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
Providing and fixing in position collapsible steel
shutters with vertival channels 20 mm x 10 mm x
mm braced with flat iron diagonals 20 mm x 5 mm
Rupees Five Thousand
size with top & bottom rails of T iron 40 mm x 40 mm
49 12.00 smt 5,445.14 Four Hundred Forty Five
x 6 mm with 38 mm diameter steel pulleys complete
And Paise Fourteen Only
with bolts, nuts, locking arrangements, stopper
handles including applying a priming coat of red lead
Providing & applying two Componant, non slumping,
non-sagging, thixotropic epoxy bedding compond &
adhesive compatible with for tiles for coving at radius
of 25 mm or as directed by the architect's/ Engineer- Rupees Five Hundred
50 165.00 in-charge make it fit for tiles inclusive of Labour, Rmt 575.70 Seventy Five And Paise
material and Equipment etc. for all heights, location, Seventy Only
shape & size as directed by the architect/ engineer
incharge etc completed as directed by E.T.C/ PMC.
(Actual Length shall be measured for payment.)
Epoxy Flooring thickness of 3- 5 mm with coverage
area 3.35 to 2.9 Kg./m2, specific gravity 1.1%,
Rupees One Thousand
including impact resistant, water resistant, chemical
51 110.00 smt 1,313.00 Three Hundred Thirteen
resistant, abrasion resistant including all required
materials labours and equipments as per detailed
drawing as directed by Engineer-In-Charge.
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
Providing and laying 16-18 mm thick polished granite
stone machine cut in single piece (Max. available) in
sill and jambs of door, window, ventilation & lift wall
cladding, staircase flooring landing, risers & treads,
skirting laid over 10 mm thick cement mortar 1: 3 (1 Rupees Two Thousand
52 1,474.00 cement: 3 coarse sand) and jointed with grey cement Sqmt 2,882.10 Eight Hundred Eighty Two
slurry with matching pigment incl. rubbing and And Paise Ten Only
polishing, half rounding edge and incl. fixing of hilty
fastener at every 1/ 3 span of sill as required size etc.
complete colour and shed as approved by architect
engineer in charge.
Providing and laying Granite slab (18 mm thick) one
Rupees Two Thousand
side polished flooring over 20 mm (average) base of
One Hundred Seventy
53 133.00 cement mortar 1:6 (1 cement: 6 coarse sand) or L.M Sqmt. 2,172.64
Two And Paise Sixty Four
1:1.5 laid and jointed with grey cement slurry
including rubbing and polishing complete.
Providing and laying polished kota stone slab 25mm
thick in risers of steps, skirting Dedo and pillars laid Rupees One Thousand
on 10mm thick cement mortar 1:3 (1-Cement: 3 One Hundred Eighty
coarse sand) and jointed with gray cement slury Seven And Paise Seventy
mixed with pigment to match the shade of slab Nine Only
including rubbing and polishing etc. complete.
Providing and laying mirror polished kotah
stone(hand dressed chissel) slab flooring over 20 mm Rupees Nine Hundred
55 1,612.00 thick base of CM 1: 6 laid over and jointed with grey Sqmt. 992.66 Ninety Two And Paise
colour cement slurry including rubbing and polishing Sixty Six Only
with amery stone etc. complete. 25 mm thick
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
P & L 24" x 24" vitrified 8 mm thick tile flooring over
20 mm (average) base of cement mortar 1:6 (1
cement: 6 coarse sand) on new surface or fixing on
Rupees One Thousand
existing flooring by adhesive material including
56 3,760.00 Sqmt. 1,232.04 Two Hundred Thirty Two
dismentaling of existing flooring and jointed with
And Paise Four Only
color cement slurry including finised with flush
pointing & cleaning the surface etc. complete for light
shade/ Dark Shade
Providing and laying Vitrified tiles 8 to 10 mm thick,
36'' x 36''/ Architect/ Engineer in charges --Approved
Rupees One Thousand
size of tiles in flooring treads of steps and landing laid
57 538.00 Sqmt. 1,484.61 Four Hundred Eighty Four
on a bed of 12mm thick cement mortar 1:3 (1-cement:
And Paise Sixty One Only
3-coarse sand)finishing with flush pointing in white
P & L 24" x 24" vitrified 8 mm thick tile flooring over
20 mm (average) base of cement mortar 1:6 (1
cement: 6 coarse sand) on new surface or fixing on Rupees One Thousand
existing floorin by adhesive material including Three Hundred Ninety
dismentaling of existing flooring and jointed with Seven And Paise Eighty
color cement slurry including finised with flush Three Only
pointing & cleaning the surface etc. complete for
Providing and laying Ceramic tiles (600mmX600 mm/
Architect/ Engineer in charges -- Approved size of
Rupees Nine Hundred
tiles Size) 8-10 mm thick in flooring treads of steps
59 411.00 Sqmt. 970.07 Seventy And Paise Seven
and landing laid on a bed of 12mm thick cement
mortar 1:3 (1-cement: 3-coarse sand) finishing with
flush pointing in white cement.
Providing and laying coloured glazed tiles of the size
300 mm x 450 mm x 8 mm/ Architect/ Engineer in Rupees One Thousand
charges -- Approved size of tiles Size in skirting, risers Four Hundred Forty One
of steps and dedo on 10 mm. thick cement plaster 1:3 And Paise Twenty Two
(1 cement: 3 coarse sand) & jointed with white Only
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
Providing and laying 19mm x 65mm round, 'D' edge
and polished granite pencil patti on top, with cement
Rupees Three Hundred
paste and including backing coat in C.M. 1:4. All joints
61 1,665.00 Rmt 375.42 Seventy Five And Paise
filled with colour/ epoxy grout and wiped to give
sharp joints with flush pointing and washed clean
Providing and fixing Sand which type Granite platform
including supplying and fixing granite stone 18 mm
thick mirror polished 1st quality Granite stones in top
and side posiition and vertical strip at front over 25 Rupees Five Thousand
62 120.00 mm thick polished kotah stone platform fixing in top Sqmt. 5,460.14 Four Hundred Sixty And
and sides and itermediates supports fixing with Paise Fourteen Only
cement mortar and adhesivee and finishing including
cutting for fixing of sink any size (as directed by
engineer incharge) at required position etc complete.
Providing and laying machine cut free edges machine
double polished Kota stone for shelves in cupboard
and walls in single piece (Miximum 1.50 mt.) 25 mm Rupees Nine Hundred
including cutting grooves in walls and fixing the stone Four And Paise One Only
with neat cement slurry in true line and level etc
completed as directed by E.T.C/ PMC. for Shelves
Providing and laying chequered terrazo tiles 28mm
thick with marble chips of sizes upto 6mm in treads of
stairs and staircases in 12mm thick bed of lime mortar
Rupees Eight Hundred
1:1.5 (1-Lime putty:1.5 coarse sand) or C.M. 1:6 (1-
64 364.00 Sqmt. 843.10 Forty Three And Paise Ten
cement: 6- coarse sand) jointed with neat cement
slurry mixed with pigment to match the shade of tiles
including rubbing and polishing complete. (A) Light
shades using white cement
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
Providing and fixing Flexible Homogeneous Vinyl
Flooring of With treatment of Polyurethane
Rupees Two Thousand
Reinforced Surface, Densely Compacted, Anti-
65 110.00 Sqmt. 2,199.60 One Hundred Ninety Nine
Bacterial and fungicidal and Antistatic having
And Paise Sixty Only
thickness of 2.00mm With weight of 3150 g/ m2 etc
completed as directed by E.T.C/ PMC.
Providing & fixing 18 mm thick of approved quality of
green marble urinal partition in single piece of size
0.62 x 1.20 mt. in cement mortar 1:1 (1 cement:1 Rupees Two Thousand
66 14.00 coarse sand) and finishing with white cement Sqmt. 2,458.34 Four Hundred Fifty Eight
including polishing on bothsides, finishing edges with And Paise Thirty Four Only
round shape of marble etc completed as directed by
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
Providing and applying integral crystalline slurry of
hydrophilic in nature for waterproofing treatment to
the RCC structures like retaining walls of the
basement, water tanks, roof slabs, podiums, reservoir,
sewage & water treatment plant, tunnels/ subway and
bridge deck etc., prepared by mixing in the ratio of 5:2
(5 parts integral crystalline slurry:2 parts water) for
vertical surfaces and 3:1 (3 parts integral crystalline
slurry: 1 part water) for horizontal surfaces and
applying the same from negative (internal) side with
the help of synthetic fibre brush. The material shall
meet the requirements as specified in ACI-212-3R- Rupees Four Hundred
67 2,254.00 2010 i.e by reducing permeability of concrete by more Sqmt. 470.41 Seventy And Paise Forty
than 90% compared with control concrete as per DIN One Only
1048 and resistant to 16 bar hydrostatic pressure on
negative side. The crystalline slurry shall be capable of
self-healing of cracks up to a width of 0.50 mm. The
work shall be carried out all complete as per
specification and the direction of the engineer-in-
charge. The product performance shall carry
guarantee for 10 years against any leakage. 22.23.1
For vertical surface two coats @ 0.70 kg per sqm per
Providing and laying cement concrete flooring 1:2:4
Rupees Three Hundred
(1-cement:2-coarse sand: 4-graded stone aggregate
68 1,746.00 Sqmt. 351.56 Fifty One And Paise Fifty
20mm nominal size) laid in one layer and finished
with a floating coat of neat cement. (B) 50mm thick.
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
Providing and laying broken china mosaic flooring for
terrace using 12 mm to 20 mm broken pieces of
glazed tiles to be laid over cement mortar 1:3 to plain
Rupees Seven Hundred
or slope and to be tempered to bring mortar creme
69 1,686.00 Sqmt. 747.29 Forty Seven And Paise
out upto surface using white cement including
Twenty Nine Only
rounding off junctions and extending them upto 15 cm
along the wall, clearing with water and oxalic acid
etc.as directed.
Providing cement vata (10 cm x 10 cm size) quartar
Rupees Twenty Three And
70 384.00 round in cement mortar 1:1 including neat cement Rmt. 23.68
Paise Sixty Eight Only
finishing watering etc. complete. For all floor
Providing and Fixing S.S. Railing for staircase made
from S.S 304 Grade 1.8 mm wall thickness matt finish,
50mm Top hand rail, 38mm Vertical Balustrade fixing
at 1.2 mt C/ C with anchor fastner 75 mm dia 8 mm
Rupees Five Thousand
thick flange and shoe cap, with 3 nos of 16 mm
Nine Hundred Seventy
71 78.00 Horizontal pipe fotting with L and Key, modular knob Rmt. 5,977.52
Seven And Paise Fifty Two
system. Balustrade top modular "T" fixing support to
50 mm hand rail and turning fixed with modular bend.
including accessories as per detailed drawing as
directed etc. complete. (testing is required of s.s 304)
Providing and fixing in position S.S. daso by providing
top 50 mm dia stain less steel pipe rail with starting Rupees One Thousand
and end point vertical post of 50 mm dia with wall/ Seven Hundred Ninety
column including bending welding and fixing for Four And Paise Seventy
staircase and balcony as directed.(testing is required Seven Only
of s.s 304) for all floor
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
Providing and filling with good quality cinder (steam
Rupees Seven Hundred
coal) as directed by engineer in charge in sunks
73 125.00 Cumt. 783.55 Eighty Three And Paise
including watering, placing, ramming well etc. as
Fifty Five Only
Providing & fixing structural steel work welded in
built up sections, hollow section framed work
including cutting hoisting fixing in position and with
Rupees One Hundred
one coat primer & two coat oil paint as per detail
74 600.00 KG 127.95 Twenty Seven And Paise
drawings etc. complete. in columns beams and joists
Ninety Five Only
channels M.S. flat Angles Pipes tees flats with
connecting plates or angle cleatsetc., etc complete all
as directed by Engineer-in-Charge.
PrProviding and Fixing 6 mm thick Lexan
Polycarbonate multi wall roofing sheet fixed with hilti Rupees One Thousand
75 15.00 screw and rubber silicon sealer and alluminium strip Sqmt. 1,441.90 Four Hundred Forty One
of size 50 x 3 mm etc complete as directed by And Paise Ninety Only
Engineer in charge.
Supplying and Installing of Metalium SL-4 type 84R
Aluminium 0.65mm TCT Plain Exterior Grade Powder Rupees Two Thousand
76 52.00 Coating of Panels and Back side Framming G.S. Black Sqmt. 2,318.96 Three Hundred Eighteen
Exterior Louvre System. etc. complete as directed by And Paise Ninety Six Only
Engineer-in-charge.
Providing and fixing 3 mm thick PVC sheets as Signage
and Display of health signs/ information of required
size having retro reflective letters/ design as per
Rupees Six Hundred Fifty
77 300.00 requirement, fixing the same through approved Each 650.44
And Paise Forty Four Only
adhesive etc. complete work shall carried out as per
instruction of Engineer-in-charge (45 x 15 cms.) work
for all the floors.
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
PROVIDING & FIXING 0.7mm THICK ANTIMICROBIAL
COATING ALUMINIUM CLIP IN PLAIN METAL FALSE
CEILING SYSTEM: Providing & Fixing of alumnimum
metal Tile ceiling system comprising of Tile of 600mm
wide and 600mm long manufactured of 0.7mm thick
Aluminium Clip-In Plain with Antimicrobial coating
Ceiling system. Tile ends will be raised with pips and
stops to ensure positive engagement into the spring to
enable for de-mounting of individual panels. The Tile
sides will be sufficiently high to ensure a minimum
Rupees Three Thousand
deflection across the length of Tile. All tiles will be
78 878.00 Sqm 3,299.41 Two Hundred Ninety Nine
bevelled or square edged. The Tile shall be powder
And Paise Forty One Only
coated with IAM serious of polyester base powder
coating, formulated without the use of TGIC that has to
be tested by interdependent labourites to the
requirements of the internationally recognised test
standards JISZ 2801:2000 and tile shall be clipped into
clip-in rail of 0.5mm thick G.I. The clip-in profile shall
be supported from slab by means of suspension of
4mm G.I. Rod, Hold on Clamp with Clip. Make:
Oculus® Building Products Pvt. Ltd./ Hunter Douglas
Ind. Pvt. Ltd./ Lindner Middle East LLC
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
Providing and fixing single layer waterproof gypusm
board 12.5 mm thick of the make Newgood Group Co.
Ltd. or equivalent & Newgood Group Co. Ltd. company
sections using waterproof board of size 1220 mm x
1830 mm x 8.0 mm suspended by G.I suapender of
size 25 mm x 3 mm with intermediate channel of size
18 mm x 40 mm x 0.80 mm at 1220 mm center to
Rupees Six Hundred Six
79 586.00 center ceiling section of size 40 mm x 35 mm x 0.55 Smt 606.95
And Paise Ninety Five Only
mm at 457 mm center to center and perimetre chanel
A of size 20 mm x 27 mm x 30 mm x 0.50 mm at edges
& drops including paper tap sand sofit cleat, anchor
fastener, scoch bolt connecting cleat joining
compound top coat on ceiling including making
necessary opening for light fitting, diffuser etc.
complete as per detail drawing as directed.
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
Designing, fabricating, testing, installing and fixing in
position Curtain Wall with Aluminium Composite
Panel Cladding, with open grooves for linear as well as
curvilinear portions of the building, for all heights and
all levels etc. including a) Structural analysis & design
and preparation of shop drawings for pressure
equalisation or rain screen principle as required,
proper drainage of water to make it watertight
including checking of all the structural and functional
design. b) Providing, fabricating and supplying and
fixing panels of aluminium composite panel cladding
in pan shape in metalic colour of approved shades
made out of 4mm thick aluminium composite panel Rupees Three Thousand
80 55.00 material consisting of 3mm thick FR grade mineral Sqmt. 3,480.24 Four Hundred Eighty And
core sandwiched between two Aluminium sheets Paise Twenty Four Only
(each 0.5mm thick). The aluminium composite panel
cladding sheet shall be coil coated, with Kynar
based PVDF/ Lumiflon based fluoropolymer resin
coating of approved colour and shade on face # 1 and
polymer (Service) coating on face # 2 as specified
using stainless steel screws, nuts, bolts, washers,
cleats, weather silicone sealant, backer rods etc. c) The
fastening brackets of Aluminium alloy 6005 T5/ MS
with Hot Dip Galvanised with serrations and serrated
washers to arrest the wind load movement, fasteners,
SS 316 Pins and anchor bolts of approved make in SS
316, Nylon separators to prevent bi-metallic contacts
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
Providing and fixing rolling shutters of approved
make made of 80 mm wide M.S. laths inter-locked
together through their entire length and jointed
together at the ends by end locks mounted on Rupees Three Thousand
81 9.00 specially designed pipe shaft with bracket plates, Smt 3,503.41 Five Hundred Three And
guide channels and arragements for inside and Paise Forty One Only
outside locking with push-pull operation including the
cost of hood cover and spring etc. complete. (A)
Shutters having width below 3.5 M.
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
Supplying And Fixing Partitions are generally
structured by Aluminum extruded sections. All panels
are in standard size and ready to assemble condition.
All exterior metal surfaces are Aluminium anodised
FINISH.12 mm thk.partical band on both the side of
the partition. It has provision for all utility
management and to mount worktops, etc., All joineries
are free from Nailing, Screwing and adhesives. All
components are removable without any damage and
designed to reconstruct, reorient or reconfiguration
layout very easily. Entire systems are free from
maintenance like refinishing anti pest treatments or Rupees Nine Thousand
refitting, lifetime. It has inherent Sound and thermal Two Hundred Forty Eight
82 18.00 insulation properties. All panels are twin layered and Smt 9,248.33
And Paise Thirty Three
very proper sealing in joint are provided to ensure Only
these properties. System is designed in such a manner
that resizing of structure and related mountings can
be carried out at site easily, if required. It is
Eco‐Friendly in true sense. Partition Skeleton Main
Vertical Section: Aluminum extruded section having
overall size of 73 mm x 29 mm having wall thk.
mm with provision to connect to outer vertical closing
section at all side. Main Horizontal section: Aluminum
extruded section having overall size 73 mm x 29 mm
having wall thk. 1.50 mm with provision to connect
with each other at side to supporting panels of 12 mm
thk. on the both sides of partition. Electric trench box
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
FLUSH PARTITION (laminate finish):
Providing & fixing flush partition up to false ceiling ht
(thickness of partition is 75 mm) having 12 mm thick
Marin plywood IS 710 both side on aluminum framing.
Aluminum framing size for vertical & horizontal
support is 50 mm x 25 mm. All exposed surfaces
finished with 1 mm thick laminate of approved shade
without any air gap and grooving as per design.
Necessary framing to be erected above false ceiling.
No extra cost to be paid for the same. Before
installation, make hole/ face plate for conduit pipes of Rupees Nine Thousand
electrical/ networking cables with open able stud Four Hundred Ninety
from partition Including all materials and labor etc. Eight And Paise Twenty
Make necessary grooves as per shown in drawing. All Eight Only
bottom ends are covered with Ghana teak bidding
Patti finished with laminate Complete with all
necessary hardware & adhesives as per details given
in drawing and as per instructions Architect/
consultant/ Engineer In charge. Contractor has to
provide all necessary cut outs (race ways.) for
Electrical works & no extra payment shall be made for
Providing and laying and fixing 100 mm thick
expansion joint by hydro cell semi rigid UV resistance Rupees Two Thousand
84 38.00 with high performance laminated closed cell Smt 2,982.06 Nine Hundred Eighty Two
polythene foam joint filler in sheet foam as directed, And Paise Six Only
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
Supply and installation of SJPF 200, this flush
mounted metal floor cover is designed for interior or
exterior applications & Self-centring aluminium centre
plate remains flush during thermal movement, but
temporarily displaces and slides over floor surface
during seismic movement with the help of spring steel
turn bar assembly. The standard loading is 500 lbs for
this model and the product will be supplied in Mill
finish. The vapour barrier shall be incorporated in
Rupees Seven Thousand
case of water resistant treatment requirement
85 33.60 Rmt 7,904.35 Nine Hundred Four And
• Extrusion: SJPF model is extruded with 6063-T5,
Paise Thirty Five Only
Systems:1. Model SJPF 200 2. Type: Cover plate.
Cover Plate Design: 3mm thk. plate. 4. Attachment
Method: Mechanical anchors. 5. With 1 mm EPDM
vapour barrier Movement: Nominal Joint Width:
51mm Minimum Joint Width:25mm Maximum Joint
Width: 89mm Make - Construction Specialties CS
Approved make Construction Specialties International
(India) Private Limited/ Vedafrance/ Vexcolt.
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
Supply & Apply of " CS" make surface-mounted metal
wall/ ceiling coverwhich is designed for interior
applications where low maintenance or tamper-
resistant applications are desired. The free-floating
aluminum center plate spans the joint and slides over
the surface of the wall or ceiling to allow movement
when required. The cover plate engages a “J‐Hook”
and locking channel for attachment. • Extrusion:
SMC4NM1/ M2 model is extruded with 6063-T5,
Rupees Four Thousand
ASTM B221 1. Basis-of-Design Product: Construction
86 34.00 Rmt 4,714.85 Seven Hundred Fourteen
Specialties, Inc. model ASM 200 2. Type: Snap-on
And Paise Eighty Five Only
cover. 3. Attachment Method: Mechanical anchors.
Movement Test: Tested with Architectural Testing,
Inc., an Intertek company (“Intertek‐ATI”) as per
ASTM E 1399-97, Report No: 84284.01-106-31
Movement: Nominal Joint Width: 51mm Minimum
Joint Width:10mm Maximum Joint Width: 76mm
Make: CS Construction Specialties Approved make
Construction Specialties International (India) Private
Limited/ Vedafrance/ Vexcolt.
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
Supply & Apply of " CS" make surface-mounted metal
wall/ ceiling coverwhich is designed for exterior
applications where low maintenance or tamper-
resistant applications are desired. The free-floating
aluminum center plate spans the joint and slides over
the surface of the wall to allow movement when
required. The cover plate engages a “J‐Hook” and
locking channel for attachment. The external vapour
barrier shall act to prevent the water penetration. The
vapour barrier will be installed using L section on the
open/ non anchored side of the EJC. The cover plate
Rupees Four Thousand
will be finished with Anodic Coating: Architectural
Nine Hundred Eighty Nine
87 34.00 Class II, clear coating 0.010 mm or thicker complying Rmt 4,989.77
And Paise Seventy Seven
with AAMA 611. • Extrusion: SMC4NM1/ M2 model is
extruded with 6063-T5, ASTM B221 1. Basis-of-Design
Product: Construction Specialties, Inc. model ASM
2. Type: Snap-on cover. 3. Attachment Method:
Mechanical anchors, .Moisture Barrier: Epdm Sheet.
Movement Test: Tested with Architectural Testing,
Inc., an Intertek company (“Intertek‐ATI”) as per
ASTM E 1399-97, Report No: 84284.01-106-31
Movement: Nominal Joint Width: 51mm, Minimum
Joint Width:10mm, Maximum Joint Width: 76mm
Approved make Construction Specialties International
(India) Private Limited/ Vedafrance/ Vexcolt.
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
Supply and application of “CS” make external Roof
cover model RJT 200 for 50 mm gap size, Aluminium
roof cover comprised of extruded alumunium
components, Injection molded turnbar, duroflex
gaskets and EPDM vapor barrier.This profile is
extruded aluminum with ASTM B 221, Alloy 6063-T5.
Rupees Nine Thousand
This profile has been tested under Architectural
88 34.00 Rmt 9,316.26 Three Hundred Sixteen
Testing Agency (an Intertek Company) for the
And Paise Twenty Six Only
movement performance. The minimum opening of the
profile is 3mm (-47mm) and the maximum openeing
of the profile is 92mm (+42mm) which is more than
±50% movement. Approved make Construction
Specialties International (India) Private Limited/
Vedafrance/ Vexcolt.
Making holes upto 52mm dia. in any RCC members by Rupees Three Hundred
89 20.00 diamond Core Cutting machine including disposing No. 366.63 Sixty Six And Paise Sixty
the debries. Three Only
Making holes upto 75mm dia. in any RCC members by
Rupees Four Hundred
90 30.00 diamond Core Cutting machine including disposing No. 408.04
Eight And Paise Four Only
Making holes upto 102mm dia. in any RCC members Rupees Four Hundred
91 40.00 by diamond Core Cutting machine including disposing No. 489.85 Eighty Nine And Paise
the debries. Eighty Five Only
Making holes upto 125mm dia. in any RCC members Rupees Five Hundred
92 50.00 by diamond Core Cutting machine including disposing No. 570.65 Seventy And Paise Sixty
the debries. Five Only
Making holes upto 152mm dia. in any RCC members Rupees Six Hundred Fifty
93 50.00 by diamond Core Cutting machine including disposing No. 652.46 Two And Paise Forty Six
the debries. Only
Making holes upto 200mm dia. in any RCC members Rupees Nine Hundred
94 20.00 by diamond Core Cutting machine including disposing No. 977.68 Seventy Seven And Paise
the debries. Sixty Eight Only
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
Making holes upto 250mm dia. in any RCC members Rupees One Thousand
95 10.00 by diamond Core Cutting machine including disposing No. 1,140.29 One Hundred Forty And
the debries. Paise Twenty Nine Only
Making holes upto 300mm dia. in any RCC members Rupees One Thousand
96 10.00 by diamond Core Cutting machine including disposing No. 1,710.94 Seven Hundred Ten And
the debries. Paise Ninety Four Only
Providing and Fixing Rubber Corner Guard -800 x
x 100 mm x 6 mm BLACK WITH YELLOW REFLECTIVE Rupees One Thousand
97 50.00 SHEETING FIXED ON THE WALL WITH SIX 2” NO 1,028.18 Twenty Eight And Paise
SCREWS etc. complete as directed by Engineer-in- Eighteen Only
Providing and fixing pre-cast Rubber Dye/ steel Dye
inter locking concrete block 60mm thick with grade of
concrete M250 pnumatic compressed/ vibrated
Rupees Six Hundred
mechanically and as per approved design Confirming
98 3,199.05 Sqmt. 686.90 Eighty Six And Paise
to IS 15658:2006 including 35 mm Sand layer for
levelling and filling the joint with sand in proper line
and level as per guidlines of IRC: SP 63-2018 etc.
Providing and position PVC Sleeves in RCC elements
like walls slabs beams etc. of 10 Kg/ cm2 UPVC Pipes Rupees One Hundred
99 30.00 and diameter of taking out service pipelines cables Each 192.02 Ninety Two And Paise
road infrasturcture work etc. upto 1 meter length for Two Only
all floors/ all levels/ all heights. (a) 50mm dia.
Rupees Two Hundred
100 30.00 b) 75mm dia. Each 280.23 Eighty And Paise Twenty
Rupees Three Hundred
101 30.00 c) 110mm dia. Each 339.05 Thirty Nine And Paise Five
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
Providing and fixing pre-cast concrete kerb stone of
gray cement based concrete block 30cm length, 30cm
Rupees Three Hundred
height and 15cm thick of M250 grade concret as per
102 417.00 Rmt 361.64 Sixty One And Paise Sixty
approved design and including excavation for fixing in
proper line and level, filling the joint with C:M 1:3
(1cement:3fine sand) etc complete.
Applying priming coat over kerb stone surface after
and including preparing the surface by throughly
Rupees One Hundred
cleaning, oil, grease, dirt and other foreign matter and
103 125.00 Smt 122.49 Twenty Two And Paise
scoured with brushes fine steel wood.scrapers and
Forty Nine Only
send paper with ready mixed priming paint brushing
red lead. and Painting two coats enamel paint
Providing and fixing concealed center point to wall
ceiling & floor CPVC (SDR 13.5) PIPE having National
Rupees One Hundred
Sanitation Foundation (NSF) seal for potable water of
104 190.00 Rmt. 166.86 Sixty Six And Paise Eighty
following dia. nominal bore tube fittings and clamps
including making good the wall, ceiling and floor etc.
complete.[A] 15 mm.
Providing and fixing concealed center point to wall
ceiling & floor CPVC (SDR 13.5) PIPE having National
Rupees Two Hundred
Sanitation Foundation (NSF) seal for potable water of
105 285.00 Rmt. 249.72 Forty Nine And Paise
following dia. nominal bore tube fittings and clamps
Seventy Two Only
including making good the wall, ceiling and floor etc.
complete. [C] 25 mm.
Providing and fixing concealed center point to wall
ceiling & floor CPVC (SDR 13.5) PIPE having National
Rupees Four Hundred
Sanitation Foundation (NSF) seal for potable water of
106 329.00 Rmt. 442.04 Forty Two And Paise Four
following dia. nominal bore tube fittings and clamps
including making good the wall, ceiling and floor etc.
complete. [C] 40 mm.
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
Providing laying and jointing in true line and level
mm dia. U.P.V.C. Pipe (SCH -40) line including fittings
of standard make as apprroved by Engineer In charge.
Pipe shall be fixed on the wall with the help of clamp Rupees Seventy Two And
at every two meter C/ C or shall be concealed as Paise Sixty Five Only
directed including necessary fittings etc. including
testing of pipe and joints and fixing the same with
adhesive solvent, including cost of all materials.
Providing laying and jointing in true line and level
mm dia. U.P.V.C. Pipe (SCH -40) line including fittings
of standard make as apprroved by Engineer In charge.
Pipe shall be fixed on the wall with the help of clamp Rupees Ninety One And
at every two meter C/ C or shall be concealed as Paise Eighty Four Only
directed including necessary fittings etc. including
testing of pipe and joints and fixing the same with
adhesive solvent, including cost of all materials.
Providing laying and jointing in true line and level
mm dia. U.P.V.C. Pipe (SCH -40) line including fittings
of standard make as apprroved by Engineer In charge.
Rupees One Hundred
Pipe shall be fixed on the wall with the help of clamp
109 855.00 Rmt 148.12 Forty Eight And Paise
at every two meter C/ C or shall be concealed as
directed including necessary fittings etc. including
testing of pipe and joints and fixing the same with
adhesive solvent, including cost of all materials.
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
Providing laying and jointing in true line and level
50mm dia. U.P.V.C. Pipe (SCH -40) line including
fittings of standard make as apprroved by Engineer In
Rupees One Hundred
charge. Pipe shall be fixed on the wall with the help of
110 231.00 Rmt 195.67 Ninety Five And Paise
clamp at every two meter C/ C or shall be concealed as
Sixty Seven Only
directed including necessary fittings etc. including
testing of pipe and joints and fixing the same with
adhesive solvent, including cost of all materials.
Providing laying and jointing in true line and level
mm dia. U.P.V.C. Pipe (SCH -80) line including fittings
of standard make as apprroved by Engineer In charge.
Rupees Four Hundred
Pipe shall be fixed on the wall with the help of clamp
111 243.00 Rmt. 452.48 Fifty Two And Paise Forty
at every two meter C/ C or shall be concealed as
directed including necessary fittings etc. including
testing of pipe and joints and fixing the same with
adhesive solvent, including cost of all materials.
Rupees Four Hundred
Providing and fixing Gun metal check or non-return
112 119.00 Each 420.63 Twenty And Paise Sixty
fullway wheel valve.(C)25mm dia.
Rupees Six Hundred Sixty
Providing and fixing Gun metal check or non-return
113 40.00 Each 663.43 Three And Paise Forty
fullway wheel valve.(E) 40mm dia.
Supplying & installing Brass Ball Valve conforming to
IS 778, of RB, Italy or equivalent. Ball valve must be Rupees Two Thousand
114 10.00 having screwed ends. The ball valve should be with Each 2,490.26 Four Hundred Ninety And
stand with maximum pressure up to 16 Kg/ cm2. Paise Twenty Six Only
Complete job as specified & directed. d) 65 mm
Providing and fixing ECO Drain Pipes in including
Rupees Five Hundred
supporting the ECO Drain pipe on the bricks at each
115 150.00 Rmt. 580.75 Eighty And Paise Seventy
joint including leakproof joints ECO Drain Pipe etc.,
complete (A) 200mm dia.
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
Providing and fixing ECO Drain Pipes in including
Rupees One Thousand
supporting the ECO Drain pipe on the bricks at each
116 348.00 Rmt. 1,370.57 Three Hundred Seventy
joint including leakproof joints ECO Drain Pipe etc.,
And Paise Fifty Seven Only
complete (B) 300 mm dia.pipe
Providing and fixing PVC SWR Nahni trap IS 14735 for
drain - 100 mm diameter with jali of the following Rupees Five Hundred
117 171.00 nominal diameter of self cleansing design with C.I Each 571.08 Seventy One And Paise
scread down or hinged grating including the cost of Eight Only
cutting and making good the walls.
Providing and fixing 600mm x 450mm Bevelled edge
Rupees Eight Hundred
mirrror of superior glass mounted on 6mm thick A.C.
118 171.00 Each 833.73 Thirty Three And Paise
sheet or plywood sheet and fixing to wooden pluge
Seventy Three Only
with C.P. brass screws and washers.
Providing and fixing Kitchen sink with C.I. or M.S.
brackets, painted white including cutting holes in Rupees Two Thousand
walls and making good the same but excluding fittings. Four Hundred Fifty Eight
(C) Vitreous China Sink.(i) 600mm x 450mm x 150mm And Paise Seventy Four
size With C.P. brass waste for washbasin or sink. (B) Only
Pro. & Fix. wash down water closet (European w.
c.pan) with integral "P" or "S" trap and PVC flushing
cistern with a pair of C.L.I. Or Mild steel Brackets, Rupees Three Thousand
120 123.00 complete with fittings such as lead value siphon, 15 Each 3,955.76 Nine Hundred Fifty Five
mm. Nominal size brass ball valve, Plastic seat cover, And Paise Seventy Six Only
Jet spray heavy duty with S.S. Braided hose 60 cm long
as per approved by Engineer in charge.
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
Providing and fixing white or coloured glazed china
vitreous china Orissa type Water closet of size 580 x
Rupees Three Thousand
440 mm including providing and fixing vitreous china
121 40.00 Each 3,436.45 Four Hundred Thirty Six
100 mm size 'P' or 'S' trap including jointing the trap
And Paise Forty Five Only
with pan and soil pipe in CM (1:1) (1 cement:1 fine
sand) etc complete.
Providing and fixing Urinal or approved quality
Rupees One Thousand
including conecting the Urinal with waste pipe, tap
122 12.00 Each 1,097.30 Ninety Seven And Paise
etc. complete.(A) White earthenware flat back or
corner type size 430mm x 260mm x 350mm.
Providing and Fixing autoclosing concealed urinal Rupees Two Thousand
123 12.00 flush valve (jaquar PRS-073) with wall flange etc. Each 2,121.00 One Hundred Twenty One
complete. As directed by EIC. Only
Providing & Fixing C.P Brass waste for washbasin or Rupees Eighty Nine And
sink (B) 40 mm Dia Paise Eighty Three Only
Providing and fixing C.P. brass towel rail comlete with
Rupees Six Hundred Three
125 12.00 C.P. brass brackets fixed to wooden plugs with C.P. Each 603.19
And Paise Nineteen Only
brass scews.(B) 600mm x 20mm size.
Rupees Two Thousand
Providing & Fixing Surgical Bib cock of FLR-5043N of Three Hundred Seventy
jaquar or Equivalent as directed and complete. Six And Paise Fifty Three
Providing and fixing screw down two way bib taps of Rupees Two Thousand
127 171.00 15mm dia- Brass down brigh polished jaquar code no. Each 2,355.32 Three Hundred Fifty Five
FLR-5041N And Paise Thirty Two Only
Providing and fixing screw down bib taps of following Rupees One Hundred
128 171.00 size: (B) Brass chromium plated screw down bib tap Each 186.83 Eighty Six And Paise
(I) 15 mm dia. Eighty Three Only
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
Providing and fixing wash basin with pedestal of std.
Height with single hole for pillar tap with C.I or M.S
brackets painted white including cutting cutting holes Rupees One Thousand
129 91.00 and making goods the same including. C.P. brass waste Each 1,917.67 Nine Hundred Seventeen
and waste pipes and bottle trap (A) Vitreous china. (II) And Paise Sixty Seven Only
Flat back washbasin 550 mm x 400 mm size (I) in
Rupees One Thousand
Providing & Fixing soap dish of jaquar or equivalent
130 99.00 Each 1,034.24 Thirty Four And Paise
make or as directed and complete.
Twenty Four Only
Rupees Five Hundred
Providing & fixing CP brass double coat hook (Jaquar-
131 99.00 Each 514.09 Fourteen And Paise Nine
ACN-1161N) complete.
Providing and fixing 2 Nos. support arms and backrest
Rupees Twenty Six
to mount at fixed height (Model R 1100 -Commander
Thousand Five Hundred
132 2.00 or equivalent) for handicap toilet complete as Each 26,577.14
Seventy Seven And Paise
recommended by the etc completed as directed by
Providing and fixing raised toilet seat with cover for Rupees Twenty Four
handicap toilet (Model R-35: Presalit- Commander or Thousand Six Hundred
equivalent) as recommended by the etc completed as Seven And Paise Sixty
directed by E.T.C/ PMC. Four Only
Providing and fixing brackets, tracks (Model R4140)
Rupees Forty Three
with flexible feed & waste pipes for adjustable type
Thousand Five Hundred
134 2.00 wash basin complete as recommended for handicap Each 43,506.76
Six And Paise Seventy Six
toilet (Make: Presalit- Commander or equivalent) etc
completed as directed by E.T.C/ PMC.
Providing and fixing to wall ceiling and floor 10.0 Kg.
F/ Cm2 working pressure poluthene pipes of the
Rupees Two Hundred
following outside Dia. Low densidy, complete with
135 251.00 Rmt. 277.43 Seventy Seven And Paise
special falnge compression type fittings, wall clipsetc.
Forty Three Only
including making good the wall ceiling and floor.(G)75
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
Providing and fixing to wall ceiling and floor 10.0 Kg.
F/ Cm2 working pressure poluthene pipes of the
Rupees Three Hundred
following outside Dia. Low densidy, complete with
136 236.00 Rmt. 336.24 Thirty Six And Paise
special falnge compression type fittings, wall clipsetc.
Twenty Four Only
including making good the wall ceiling and
floor.(G)110 mm
Providing and fixing on Z clamp and floor 10.0 Kg. F/
Cm2 working pressure poluthene pipes of the
Rupees Five Hundred
following outside Dia. Low densidy, complete with
137 148.00 Rmt. 592.56 Ninety Two And Paise
special falnge compression type fittings, wall clipsetc.
including making good the wall ceiling and
floor.(G)160 mm
Constructing brick masonry road gully chamber 500 Rupees Two Thousand
138 14.00 mmx450mmx600mm incl.500 mmx450mm Each 2,017.19 Seventeen And Paise
C.I.horizontal grating with frame complet Nineteen Only
Providing & fixing S.W. Gully trap with C.I.grating
brick masonary chamber & water tight C.I. Cover with Rupees One Thousand
139 20.00 frame of 300x300 mm size (inside)with standard Each 1,292.19 Two Hundred Ninety Two
weight. Square mouth trap 100mm x 100mm size P- And Paise Nineteen Only
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
Constructing Manhole with R.C.C. top slab in 1:2:4 mix
(1-cement:2-coarsesand: 4-graded stone aggregate
mm nominal size) foundation concrete 1:3:6 mix (1-
cement: 3-coarse sand: 6 Brickbats 40 + 50 mm size)
inside plastering 15 mm thick with Cement Mortar 1:3
(1-Cement: 3-coarse sand) finished with a floating
coat of neat cement and making channels in cement
concrete 1:2:4 mix (1-Cement:2-Coarse sand: 4-stone
aggregate 20 mm nominal size) finished smooth Rupees Eleven Thousand
140 12.00 complete including curing and festing (i) Inside size Each 11,029.97 Twenty Nine And Paise
900 mm x 1200 mm and 1.5 M. deep including C.I. Ninety Seven Only
cover with frame size 560 mm diameter total weight
of cover and frame to be not less than 128 kgs. (Wt. of
cover 64 Kg. and Wt. of frame 64 Kg.) (A) With
mm thick walls of brick msonry using brick having
crushing strength not less than 35 Kg./ Sq.cm. in
Cement Mortar 1: 5 (1-Cement:5-Coarse sand)
(1)A type depth 0.90 Metre for 150 mm diameter
Extra rate for constructing B.B masonry for every Rupees Five Hundred
141 10.00 additional depth 0.10 meter or part thereof over item Each 522.96 Twenty Two And Paise
24.27 (I) for depth from 0.90 meter to 1.50 meter. Ninety Six Only
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
Constructing Manhole with R.C.C. top slab in 1:2: 4 mix
(1-cement:2-coarsesand: 4-graded stone aggregate
mm nominal size) foundation concrete 1: 3: 6 mix (1-
cement: 3-coarse sand: 6 Brickbats 40 + 50 mm size)
inside plastering 15 mm thick with Cement Mortar 1:
3 (1-Cement: 3-coarse sand) finished with a floating
coat of neat cement and making channels in cement
concrete 1:2: 4 mix (1-Cement:2-Coarse sand: 4-stone Rupees Nineteen
aggregate 20 mm nominal size) finished smooth Thousand Three Hundred
complete including curing and festing (i) Inside size Thirty And Paise Forty Six
900 mm x 1200 mm and 1.5 M. deep including C.I. Only
cover with frame size 560 mm diameter total weight
of cover and frame to be not less than 128 kgs. (Wt. of
cover 64 Kg. and Wt. of frame 64 Kg.) (A) With
mm thick walls of brick msonry using brick having
crushing strength not less than 35 Kg./ Sq.cm. in
Cement Mortar 1: 5 (1-Cement:5-Coarse sand
2) B type depth 1.50 meter for 150mm diameter sewer
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
Constructing brick masonry chamber for underground
C.I. Inspection chamber and bends with briocks having
croshing strength not less than 35Kg. Cm2 in C.M. 1:5
C.I. cover with frame (Light duty) 455mm x 610mm
intenal dimensions total weight of cover with frame to
Rupees Two Thousand
be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of
Nine Hundred Thirty Two
143 10.00 frame 15Kg.) (R.C.C. top slabe with 1:2:4 mix (1- Each 2,932.93
And Paise Ninety Three
cement:2- coarse sand:4-graded stone aggregate
20mm size) foundation concrete 1:5:10 inside plaster
15mm thick with cement mortar 1:3 finished smooth
with a floating coat of neat cement on walls and bed
concrete etc. complete.(i) Inside dimensions 455mmx
610mm and 450mm deep for single pipe line
Constructing brick masonry chamber for underground
C.I. Inspection chamber and bends with briocks having
croshing strength not less than 35Kg. Cm2 in C.M. 1:5
C.I. cover with frame (Light duty) 455mm x 610mm
intenal dimensions total weight of cover with frame to
be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of
Rupees Three Thousand
frame 15Kg.) (R.C.C. top slabe with 1:2:4 mix (1-
144 4.00 Each 3,660.76 Six Hundred Sixty And
cement:2- coarse sand:4-graded stone aggregate
Paise Seventy Six Only
20mm size) foundation concrete 1:5:10 inside plaster
15mm thick with cement mortar 1:3 finished smooth
with a floating coat of neat cement on walls and bed
concrete etc. complete.(ii) Inside dimensions 500mm
x 700 mm and 450mm deep for pipe line with one or
two inlets. (upto 10 ton)
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
Extra over items 24.44 for every additional depth of Rupees Two Hundred
145 2.00 0.1M. of part thereof beyond 450mm depth for Brick Each 242.39 Forty Two And Paise
masonry chamber.(i) for 455mm x 610mm size. Thirty Nine Only
Extra over items 24.44 for every additional depth of Rupees Two Hundred
146 2.00 0.1M. of part thereof beyond 450mm depth for Brick Each 264.86 Sixty Four And Paise
masonry chamber. (ii) for 500mm x 700mm size. Eighty Six Only
Providing, laying and jointing in true line and level
110 diametre U.P.V.C (Type B) conforming to IS
13592-1992 with one end plain and other end
socketed with rubber ring, & fittings conforming to ISI
14735-1999 of approved make for drainage system
pipe line, pipe shall be jointed with each other with Rupees Eight Hundred
147 150.00 rubber lubricant, pipe shall be fixed on wall using of Rmt. 835.15 Thirty Five And Paise
PVC clamp of the size 110 mm diametre x 149 mm Fifteen Only
length x 145 mm heigh at every 2000 mm center to
center or shall be concealed in walls as directed
including necessary fittings such as bends, shoes etc.
including testing of pipes and joints and jointed with
adhesive solvent cement including cost of all materials.
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
Providing, laying and jointing in true line and level
160 diametre U.P.V.C (Type B) conforming to IS
13592-1992 with one end plain and other end
socketed with rubber ring, & fittings conforming to ISI
14735-1999 of approved make for drainage system
pipe line, pipe shall be jointed with each other with Rupees Eight Hundred
148 250.00 rubber lubricant, pipe shall be fixed on wall using of Rmt. 831.22 Thirty One And Paise
PVC clamp of the size 160 mm diametre x 210 mm Twenty Two Only
length x 196 mm heigh at every 2000 mm center to
center or shall be concealed in walls as directed
including necessary fittings such as bends, shoes etc.
including testing of pipes and joints and jointed with
adhesive solvent cement including cost of all materials.
Providing erecting and fixing three layer coated
Syntex PVC. (ISI) water tank of required capacity each Rupees Eleven And Paise
with all necessary fittings and connection etc. Twenty Nine Only
complete on terrace.
Providing and constructing SOAK WELL of 2.50m
internal dia and 6.00 depth depth internal clear
dimention including the cost of execavation, PCC 1:4:8
foundation for honey combed masonary in C.M. 1:4
(1cement: 4 sand), casting R.C.C. 1:2:4 (1cement:2
sand: 4 graded stone aggregate 20mm nominal size) Rupees Forty Thousand
150 1.00 top slab 12 thick with C.I. manhole cover 600mm x Each 40,751.76 Seven Hundred Fifty One
450mm size of 35 kg. weight and 75mm dia C.I. pipe And Paise Seventy Six Only
1800mm long with 75mm dia cowel vent and filling
the wall 1000mm in depth with dry brick bats
including providing vata in C.M. 1:3 (1cement: 3 sand),
curing including cost of reinforcement etc. complete
as per detailed drawing and directed by E.I.C.
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
Construction Septic tank inside dimention of 4.00 m in
length & 2.50 m in width & 2.00 m depth including
excavating any type of soil as shown and mentioned in
the drawing, providing and laying 0.10 m thick plain
cement concrete 1:3:6 (1 cement: 3 coarse sand:
graded stone agg.) 40 mm thick IPS flooring at bottom
with brick masonary 0.23 m thick walls CM 1:5 (1
cement: 5 coarse sand) and intermediate partition CM
1:4 & RCC Top slabs12 cms thick in 1:2:4 (1 cement:2
151 1.00 Each Rupees Nil
coarse sand: 4 graded stone agg) including
reinforcement as per design and 15 mm thick cement
plaster in CM 1:4 with floating coat of neat cement
slurry inside, top and around tank below 15 cm on
ground level, Also provide Two nos CI Manhole frame
and cover of size 60 cm x 45 cm & 75 mm dia. PVC
kgf/ Sq cm pressure air vent pipe in 3.00 length with
cowl etc complete as per direction of Engineer in
Providing laying (two level or slopes) and jointing
reinforced concrete light duty, non-pressure pipes I.S. Rupees One Thousand
152 140.00 class NP-2 of the followings internal diameter with Rmt 1,060.59 Sixty And Paise Fifty Nine
collars and butt ends prepared for collar joints Only
including testing of joints complete. 450 mm
Providing and Fixing ABS Plastic of Size:- 750 mm x
250mm x75 mm, Per Mtr # 4 Nos (2 black, 2 yellow), Rupees Three Thousand
153 24.00 TOP DESIGN – LINE DESIGN ANTI SKID PATTERN FOR Rmt 3,509.75 Five Hundred Nine And
GRIP fililing CEMENT INSIDE etc. complete as directed Paise Seventy Five Only
by Engineer-in-charge.
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
Road Marking Providing and laying of Hot applied
Thermoplastic compound 2.5 mm thick including
Reflectorising Glass Beads @ 250 gms per sqm area,
thickness of 2.5 mm is exclusive of surface applied
glass beads as per IRC: 35 & finished surface to be
level, uniform and free from streaks and holes. zebra
patta/ bump patta lane/ centerline/ edgeline/
Rupees Three Hundred
cutpatta.The white color marking should provide
154 39.00 Smt 367.72 Sixty Seven And Paise
liminance coefficinet on cemend road shalll be min
Seventy Two Only
130mcd/ m2/ lux and Asphalt road shall be min
100mcd/ m2/ lux during the service life during the
day time. The marking should meet the performance
criteria for night time reflectivity, wetreflectivity and
skid resistanceas mentioned in the section-15 of
IRC35-2015. Warranty for the Retro reflectivity
should be two years.
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
Cat Eye/ Road Stud/ RPM: Supplying Raised Pavement
Markers made of polycarbonate and ABS moulded
body and reflective panels with Micro prismatic lens
(No Glass bead lens) capable of providing total
internal reflection of the light entering the lens face
and shall support a load of 13635 kgs. tested in
accordance to ASTM D 4280 Type H and complying to
Specifications of Category A of MORTH Circular No
Rupees Two Hundred
RW/ NH/ 33023/ 10-97 Ð DO III Dt 11.06. 1997. The
155 20.00 Nos. 217.40 Seventeen And Paise Forty
height, width and length shall not exceed 20 mm,
mm and 130 mm and with minimum reflective area of
13 Sqcm on each side and the slope to the base shall
be 35 +/ - 5 degree. The body of the marker should
having finger grip for easy and accurate placement
and application with epoxy/ bituminous Adhesive as
recommended by the manufacturer of the marker. The
color of the marker should be as per the IRC 35-2015
and as directed by Engineer-in-charge.
Rolling and consolidation of soling including filling
Rupees Twenty Two And
156 3,192.00 indepression which occurduring the process, with Smt 22.75
Paise Seventy Five Only
powerroler 8 tonne to 12 tonne.
Rupees Nine Hundred
Providing and fixing C.I Manhole cover 0.60 mt x
157 2.00 Each 958.17 Fifty Eight And Paise
mt size having weight not less than 35 Kg
Providing, laying and fixing 200 mm wide PVC water
stop of approved make and grade thickness in
Rupees Four Hundred
concrete work for water tightstructures like retaining
158 48.00 Rmt 414.10 Fourteen And Paise Ten
walls of pound water body and underground water
tank including cleaning and placing in line level etc.
complete, as directed.
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
Providing & Fixing iron steps of size 500mm x 150mm Rupees One Hundred
159 14.00 x 22.5 mm and painting with two coats of Nos. 163.85 Sixty Three And Paise
anticorrosive paint etc. complete. Eighty Five Only
Providing and fixing Steel Fibre Reinforced Concrete Rupees Five Thousand
160 10.00 (SFRC)Cover Weight -50 kg etc. complete as per Nos 5,014.65 Fourteen And Paise Sixty
approved by EIC/ Architect. Five Only
Box cutting the road surface to proper slope and
Rupees One Hundred
camber for making a base for road work includ in
161 336.00 Cumt. 111.85 Eleven And Paise Eighty
gremoving the excavated stuffand depositing on the
road side slope as directed upto 50Mt.lead.
Providing and Laying W.B.M., in one layers, using
B.T.M.C. metal of size 40mm to 63mm in layers
including 16% stone screening 13.2mm size and 8% Rupees One Thousand
162 96.00 stone dust as filler, including spreading, watering and Cumt. 1,053.43 Fifty Three And Paise
cosolidation by vibratory roller as per MoRTH Forty Three Only
specifications etc. complete as directed by Engineer-in-
Providing & Laying 15.00 cm thick M250 grade
concrete trimix using P21(water reducing concrete
admixture at 100 ml per bag of cement & recon 3 s
fiber at 125 gm per bag of cement including making C
Rupees Five Thousand Six
channel 75 x 75 mm required to maintain level, slope
163 178.00 Cumt. 5,689.33 Hundred Eighty Nine And
and thickness of the concrete road leveling of placed
Paise Thirty Three Only
concrete with surface vibrator and finishing with
power floater & trowel light brooming the surface &
including cutting & filling of expansion joint as
directed by Engineer in charge.
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
"You are Here" map
Providing, printing & fixing the Site Map "You are
here" map of High quality inkjet printing on vynil to be
pasted on 3mm thick sunboard and laminated. the
same to be fixed on wall/ structure having the backing
layer of form sheet including Stainless steel capped
Rupees One Thousand
screws etc. all complete as per drawing/ details.
164 5.00 Nos. 1,851.63 Eight Hundred Fifty One
And Paise Sixty Three Only
(For Signage)'-Do same as above item 1200 mm x
mm (48" x 36") for Building map
(For Signage)'-Do same as above item 1800 mm x
1200 mm (6' x 4') for Charter Maps
(For Signage)'-Do same as above item 1200 mm x
mm (48" x 36") for General instruction (For Signage)
Main Door Signage
Stainless Steel plate of grade 304 having size
Rupees Fourteen
500x150x1mm thick (brush finish) shall be used as
Thousand Nine Hundred
165 100.00 base/ background. The height of the font shall be Nos. 14,942.95
Forty Two And Paise
30mm for name pasting and the designation shall
Ninety Five Only
have 15mm height pasted below the name of person.
vinyl fonts (For Signage)
25mm deep Box type S.S metal letters forming
composite box made from 1mm thick stainless steel
plate of grade 304 having colour/ finish of approved
Rupees One Thousand
color/ finish by consultant/ client for following font
166 120.00 Nos. 1,832.96 Eight Hundred Thirty Two
size to be placed at Main Gate/ on exterior wall with
And Paise Ninety Six Only
necessary S.S. Clamps, S.S. screws, S.S. Bolts, hardware
and acessoaries compelet (a) 600mm high (For
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
25mm deep Box type S.S metal letters forming
composite box made from 1mm thick stainless steel
plate of grade 304 having colour/ finish of approved
Rupees One Thousand
color/ finish by consultant/ client for following font
167 50.00 Nos. 1,222.10 Two Hundred Twenty
size to be placed at Main Gate/ on exterior wall with
Two And Paise Ten Only
necessary S.S. Clamps, S.S. screws, S.S. Bolts, hardware
and acessoaries compelet for 400mm high (For
25mm deep Box type S.S metal letters forming
composite box made from 1mm thick stainless steel
plate of grade 304 having colour/ finish of approved
Rupees Seven Hundred
color/ finish by consultant/ client for following font
168 50.00 Nos. 762.55 Sixty Two And Paise Fifty
size to be placed at Main Gate/ on exterior wall with
necessary S.S. Clamps, S.S. screws, S.S. Bolts, hardware
and acessoaries compelet for 250mm high (For
25mm deep Box type S.S metal letters forming
composite box made from 1mm thick stainless steel
plate of grade 304 having colour/ finish of approved
Rupees Three Hundred
color/ finish by consultant/ client for following font
169 30.00 Nos. 383.80 Eighty Three And Paise
size to be placed at Main Gate/ on exterior wall with
necessary S.S. Clamps, S.S. screws, S.S. Bolts, hardware
and acessoaries compelet for 125mm high (For
Providing and Fixing Best Quality of S.S. Metal Letter
Rupees Nine Hundred
on Outerside Wall at Any Height Including Polishing &
170 10.00 Nos. 929.20 Twenty Nine And Paise
Anchoring Labour Etc Complete as Directed by
Engineer in charge.
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
Providing and fixing 15 mm thick 300 mm x 300 mm
Tactile warning tiles (Attention Tiles i.e. Tectile
Warning Surface Indiactor (TWSI) of Johnsan Endura
Tac Botton Yellow plus or quivalent make in flooring
laid on 20 mm tihck cement mortar 1:6 (1 Cement:
Coarse sand) on new surface and jointed with cement
Rupees One Thousand
slurry including finished with flush pointing &
Three Hundred Thirty
171 124.00 cleaning the surface for all floors as per detailed smt 1,332.43
Two And Paise Forty
drawing etc. completed as directed by Architect or
Engineer in charge. These tiles shall be Anti Skid,
chemical resistant, Fade Proof, Frost - Heat & Weather
proof, High Flexural Strength, Highly durable, Stain
resistance. All Tectile warning tiles meet the specific
size and dimension standard as per required by ISO/
Providing and fixing coloured self adhesive PU Tactile
tile, ground surface indicators of Poyurethene of size
Rupees Four Thousand
300 mm x 300 mm for guilding/ warning to the
Five Hundred Twenty
172 124.00 visually visitors in the center/ side of the pedestrian/ smt 4,529.85
Nine And Paise Eighty
approach pathway as per specificatio and guidelines
complete in all respect to the entinre satisfaction of
Engineer in charge.
Providing and fixing Braile indicator of size 170 mm x
35 mm for hand rails of the approved design and Rupees Eight Hundred
173 104.00 hame have braile dots raised 0.5 mm above the base rmt 842.09 Forty Two And Paise Nine
plate to be installed at specific locations as per Only
direction of Engineer in charge.
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
Providing and fixing Acrylic multilingual braile (raised
dots) DIRECTIONAL SIGNBOARDS of size 225 x
mm designed as per accessibility standards and
having 3.5 mm thick acrylic base plate with Upper
Case San Serif words made of white acrylic non glare
cut out letters of height 15 mm raised not less than 0.8 Rupees One Thousand
mm above base plate and the equivalent word written Two Hundred Seventy
in Gujarati, English or Hindi non glare acrylic cut Seven And Paise Sixty Five
arrow pointing in the require direction. Each Only
signboard to be fixed as per manufacturers
specifications on the wall at the approved location and
at a height of 1200 mm from Floor level complete as
per design/ specifications and guidelines as per entire
satisfaction of the Engineer in charge.
providing and filling epoxy based grout in grooves of
size up to 6mm x 6mm in flooring or dado with PVC
spacer of BAL Endura/ Kerakoll/ BASF or equivalent
as per approved make of approved shade and color.
Rupees Two Hundred
Rate shall be inclusive of protecting the edges,
175 1,612.00 smt 274.95 Seventy Four And Paise
cleaning the grooves before filling and protecting tile
Ninety Five Only
upto satisfaction of EIC. Rate shall be inclusive of
filling groove through epoxy based filler with PVC
spacer as per manufacturer specification. Item shall be
paid in theoretical consumption on site.
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
Designing, Supply and Installation of LED SS Back light
Signages, shown in drawing should be erected with
S.S. 304 wall mounting digital printing on various
Rupees Eight Thousand
medium as per approved by EIC or architect. (font
Nine Hundred Thirty Five
176 8.00 thickness -42 mm) Rate is inclusive of all other SMT 8,935.47
And Paise Forty Seven
charges like required civil work, transportation,
labour, colour, wastage etc. Measurement shall be
valid only for the Signages element including the
supports/ installation elements
Providing & fixing of reinforcement bars
(reiforcement bars shall be paid extra under relevant
item of work) after drilling the hole of required
diameter & depth, cleanning of the same, providing/
filling the hole with Injection Mortar (HIT HY 150 of
Hilti or approved equivalant), inserting reinforcement
Rupees One Hundred Five
177 50.00 bar etc. complete as per Manufacturers & architects Nos 105.04
And Paise Four Only
instruction.The work shall be carried out by the
technical workmens/ agency approved by the
manufacturer and under technical supervision of
Manufacturer of Injection grout including all
materials, tool tackles, labour etc.complete. (a) 8 mm.
dia.bar -Holes 12mm dia Depth 100mm
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
Providing & fixing of reinforcement bars
(reiforcement bars shall be paid extra under relevant
item of work) after drilling the hole of required
diameter & depth, cleanning of the same, providing/
filling the hole with Injection Mortar (HIT HY 150 of
Hilti or approved equivalant), inserting reinforcement Rupees One Hundred
178 50.00 bar etc. complete as per Manufacturers & architects Nos 135.34 Thirty Five And Paise
instruction.The work shall be carried out by the Thirty Four Only
technical workmens/ agency approved by the
manufacturer and under technical supervision of
Manufacturer of Injection grout including all
materials, tool tackles, labour etc.complete. (B)
mm. dia.bar -Holes 14mm dia Depth 100mm
Providing & fixing of reinforcement bars
(reiforcement bars shall be paid extra under relevant
item of work) after drilling the hole of required
diameter & depth, cleanning of the same, providing/
filling the hole with Injection Mortar (HIT HY 150 of
Hilti or approved equivalant), inserting reinforcement Rupees One Hundred
179 50.00 bar etc. complete as per Manufacturers & architects Nos 168.67 Sixty Eight And Paise Sixty
instruction.The work shall be carried out by the Seven Only
technical workmens/ agency approved by the
manufacturer and under technical supervision of
Manufacturer of Injection grout including all
materials, tool tackles, labour etc.complete. (C)
mm. dia.bar -Holes 14mm dia Depth 120mm
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
Providing & fixing of reinforcement bars
(reiforcement bars shall be paid extra under relevant
item of work) after drilling the hole of required
diameter & depth, cleanning of the same, providing/
filling the hole with Injection Mortar (HIT HY 150 of
Hilti or approved equivalant), inserting reinforcement Rupees Two Hundred
180 50.00 bar etc. complete as per Manufacturers & architects Nos 215.13 Fifteen And Paise Thirteen
instruction.The work shall be carried out by the Only
technical workmens/ agency approved by the
manufacturer and under technical supervision of
Manufacturer of Injection grout including all
materials, tool tackles, labour etc.complete. (D)
mm. dia.bar -Holes 20mm dia Depth 160mm
WATER BORE: Drilling pilot borehole of size 250/ 300 Rupees Six Hundred And
mm at above site by mud flush direct rotery rig. Paise Ninety Five Only
Reaming of 250/ 300 mm dia.Pilot borehole to size
Rupees Three Hundred
550 mm dia. Incliding assembling, lowering housing,
182 250.00 Mtr 366.63 Sixty Six And Paise Sixty
casing strainerpipers with gravel packing and clayball
Development of cach water bearingzone coming
across the full depth of tubewell by lowering 100 mm Rupees Twenty Seven
dia.Droplineand 32 mm dia airline for each water Thousand Seven Hundred
bearing Zone with suitabale capacity air compressar Twenty And Paise Forty
up to avilability of sand free discharge. (Lowering of Six Only
drop line up to 186 mtr)
Rupees Twenty Seven
900 CFM/ 200 PSI capacity air compressar upto the Thousand Six Hundred
availability of sand free discharge for upto 250 mtrs Three And Paise Thirty
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
Supply of M.S. E.R.W. plain end medium duty pipe
Rupees Three Thousand
confirming to IS 4270/ 1992 with laatest amendments
185 250.00 Mtr 3,605.70 Six Hundred Five And
in random lenth of 4 to 7 mtr. Of size 250 mm dia
Paise Seventy Only
(minmum thicknes of 7.1 mm)
Screen Slotting of MS ERW blank pipe of following size
having slot size as 6.75 cm x 6.35 cm x 3.12 mm
Rupees And Paise Twenty
186 1,12,320.00 (including unloading of blank pipes from truck & slots 0.24
reloading slotted pipes into truck). As above having
slot size as 6.75 cm x 6.35 cm x 1.59 mm. 250 mm dia.
Supply of miscellenious bore material suitable to
mm dia pipes as following (A) MS Bore clamps made Rupees Two Thousand
187 1.00 from M.S. plate with 3 holes on either side with nuts & Pair 2,037.91 Thirty Seven And Paise
bolts of std make of size 900X100X16 mm flat to 250 Ninety One Only
Supply of miscellenious bore material suitable to
mm dia pipes as following (B) MS Bore Plug having
100mm height made from M.S. plate with 3 holes at Rupees One Thousand
188 1.00 equal distance on circumferrence for nut-bolts type, No 1,161.62 One Hundred Sixty One
locking arrrangement with nuts-bolts & lock nuts of And Paise Sixty Two Only
std make complete from 5 mm thick M.S. plate suitable
for 250mm dia pipe.
Supply of miscellenious bore material suitable to
Rupees One Thousand
mm dia pipes as following (C) MS Bail Plug having
189 1.00 No 1,065.02 Sixty Five And Paise Two
length 0.45 mtr from medium class pipe as per I.S.S.
suitable for 250 mm dia pipe.
Supply of miscellenious bore material suitable to
Rupees Ninety One And
190 168.00 mm dia pipes as following (D) Steel bent plate suitable No 91.71
Paise Seventy One Only
for ERW pipe for 250mm dia (size:200 X 150X6 mm)
Rupees Two Thousand
191 50.00 Supply of GRAVEL OF selected size 4 mm to 6mm Cum 2,049.29 Forty Nine And Paise
Twenty Nine Only
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
Rupees Eighteen
192 1.00 Electrologging of Pilot bore hole with carting. Job 18,180.00 Thousand One Hundred
Rupees Fourteen
Geohydrological ground water investigation including Thousand Four Hundred
water sample chemical analysis Twenty Eight And Paise
Eighty Six Only
Providing, supplying and commissioning ISI mark CI
D/ F Reflux Valves of following class and diameter
including all taxes, insurance, transportation, freight Rupees Five Thousand
194 1.00 charges, octroi, inspection charges, loading, unloading, Nos 5,401.48 Four Hundred One And
conveyance to departmental stores stacking etc. Paise Forty Eight Only
complete. Reflux valves PN 1 IS 5312 with ISI mark
Providing, laying and jointing in true line and level
110 diametre U.P.V.C (Type B) conforming to IS
13592-1992 with one end plain and other end
socketed with rubber ring, & fittings conforming to ISI
14735-1999 of approved make for drainage system
pipe line, pipe shall be jointed with each other with Rupees Eight Hundred
195 200.00 rubber lubricant, pipe shall be fixed on wall using of Rmt. 835.15 Thirty Five And Paise
PVC clamp of the size 110 mm diametre x 149 mm Fifteen Only
length x 145 mm heigh at every 2000 mm center to
center or shall be concealed in walls as directed
including necessary fittings such as bends, shoes etc.
including testing of pipes and joints and jointed with
adhesive solvent cement including cost of all materials.
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
Filling of Existing tube well or abandoned bore hole of Rupees Eighty Five And
any size by sticky clay (with required materials) Paise Eighty Five Only
Lifting of submersible mtor pump set complete with
required no & size of casing pipe by means of proper Rupees Two Thousand
197 1.00 chain pulley block and pipe wrenches. Job includes 2,996.67 Nine Hundred Ninety Six
stacking of pipe chronologically after due checking of And Paise Sixty Seven Only
threads. (c) above 120 meters
Percolation well:1) Boring and Sinking 30 cm.
diameter percolation well reverse rotary drilling
system including excavation and refilling mud pit, pre
and post site cleaning etc. complete and thereafter
withdrawal and removal of the Derrick etc. complete.
190mt. depth 2) Supplying, fixing and lowering 20 cm
diameter PVC strainer pipes having slot size 2 mm to
suit the size of water bearing coarse sand to the
required depth as per direction of the engineer 3)
Rupees Four Lakh(s) Five
Washing and developing the tube well with the air
Thousand Four Hundred
198 1.00 compressor (900 cfm/ 200 psi) with drop line Nos 4,05,481.84
Eighty One And Paise
washing with every water bearing zone upto bottom
Eighty Four Only
level till sand free water. 4) Making Rain water
Harvesting pit 2mtr x 2 mtr x 2.5mtr deep with 35 x
35 cm dry brick honey comb perforated brick work
with manhole covers etc. complete as per standard
design Rate shall be inclusive of all material, labour,
equipment, consumable and all type of filling material
like Graval/ metal/ sand in Rain water Harvesting pit
etc as per drawing and as directed by Engineer in
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
RCC Hume Pipe: Providing & laying. R.C.C. Hume pipe
for cable to be laid 90 cm. below ground across the Rupees Three Hundred
199 50.00 road crossing or on floor with necessary material in an Rmt 343.40 Forty Three And Paise
approved manner and making the ground as per Forty Only
original. (C) 300 mm dia
Providing, laying, testing & commissioning of 'C' class
heavy duty G.I. pipe conforming to IS 1239 including
welding, fittings like elbows, tees, flanges, tapers, nuts,
bolts, gaskets etc. and fixing the pipe on the wall/ Rupees One Thousand
ceiling with suitable clamp/ support frame and One Hundred Eleven Only
painting with two or more coats of synthetic enamel
paint of required shade complete as required:25mm
Providing, laying, testing & commissioning of 'C' class
heavy duty G.I. pipe conforming to IS 1239 including
welding, fittings like elbows, tees, flanges, tapers, nuts,
Rupees One Thousand
bolts, gaskets etc. and fixing the pipe on the wall/
201 111.00 Mtr 1,575.60 Five Hundred Seventy
ceiling with suitable clamp/ support frame and
Five And Paise Sixty Only
painting with two or more coats of synthetic enamel
paint of required shade complete as required: 32mm
Providing, laying, testing & commissioning of 'C' class
heavy duty G.I. pipe conforming to IS 1239 including
welding, fittings like elbows, tees, flanges, tapers, nuts,
Rupees One Thousand
bolts, gaskets etc. and fixing the pipe on the wall/
202 202.00 Mtr 1,919.00 Nine Hundred Nineteen
ceiling with suitable clamp/ support frame and
painting with two or more coats of synthetic enamel
paint of required shade complete as required: 40mm
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
Providing, laying, testing & commissioning of 'C' class
heavy duty G.I. pipe conforming to IS 1239 including
welding, fittings like elbows, tees, flanges, tapers, nuts,
Rupees Two Thousand
bolts, gaskets etc. and fixing the pipe on the wall/
203 108.00 Mtr 2,373.50 Three Hundred Seventy
ceiling with suitable clamp/ support frame and
Three And Paise Fifty Only
painting with two or more coats of synthetic enamel
paint of required shade complete as required: 50mm
Providing, laying, testing & commissioning of 'C' class
heavy duty G.I. pipe conforming to IS 1239 including
welding, fittings like elbows, tees, flanges, tapers, nuts,
Rupees Two Thousand
bolts, gaskets etc. and fixing the pipe on the wall/
204 105.00 Mtr 2,979.50 Nine Hundred Seventy
ceiling with suitable clamp/ support frame and
Nine And Paise Fifty Only
painting with two or more coats of synthetic enamel
paint of required shade complete as required: 65mm
Providing, laying, testing & commissioning of 'C' class
heavy duty G.I. pipe conforming to IS 1239 including
welding, fittings like elbows, tees, flanges, tapers, nuts,
Rupees Three Thousand
bolts, gaskets etc. and fixing the pipe on the wall/
205 151.00 Mtr 3,484.50 Four Hundred Eighty Four
ceiling with suitable clamp/ support frame and
And Paise Fifty Only
painting with two or more coats of synthetic enamel
paint of required shade complete as required: 80mm
Providing, laying, testing & commissioning of 'C' class
heavy duty G.I. pipe conforming to IS 1239 including
welding, fittings like elbows, tees, flanges, tapers, nuts,
bolts, gaskets etc. and fixing the pipe on the wall/ Rupees Four Thousand Six
ceiling with suitable clamp/ support frame and Hundred Forty Six Only
painting with two or more coats of synthetic enamel
paint of required shade complete as required:100mm
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
Providing, laying, testing & commissioning of 'C' class
heavy duty G.I. pipe conforming to IS 1239 including
welding, fittings like elbows, tees, flanges, tapers, nuts,
Rupees Six Thousand Five
bolts, gaskets etc. and fixing the pipe on the wall/
207 17.00 Mtr 6,514.50 Hundred Fourteen And
ceiling with suitable clamp/ support frame and
Paise Fifty Only
painting with two or more coats of synthetic enamel
paint of required shade complete as required:150mm
Supplying and fixing single headed internal hydrant
valve with instantaneous Gunmetal/ Stainless Steel
Rupees Eight Thousand
coupling of 63 mm dia with cast iron wheel ISI marked
208 10.00 Nos. 8,290.08 Two Hundred Ninety And
conforming to IS 5290 (Type -A) with blank
Paise Eight Only
Gunmetal/ Stainless Steel cap and chain as required:
Single headed Gunmetal
Providing, fixing, testing and commissioning of C.I.
Rupees Five Thousand
Butterfly valve conforming to I.S:13095 class PN
209 3.00 Nos. 5,460.06 Four Hundred Sixty And
rating with Fittings, Flanges, Nutbolts, Washers,
Gaskets etc.of size 80mm nominal dia
Providing, fixing, testing and commissioning of C.I.
Rupees Four Thousand
Butterfly valve conforming to I.S:13095 class PN
210 1.00 Nos. 4,155.14 One Hundred Fifty Five
rating with Fittings, Flanges, Nutbolts, Washers,
And Paise Fourteen Only
Gaskets etc.of size 50mm nominal dia
Providing, installation, testing and commissioning of Rupees Eight Thousand
non-return valve of following sizes confirming to IS: Three Hundred Thirty
5312 complete with rubber gasket, GI bolts, nuts, Seven And Paise Fifty Five
washers etc.as required: 80mm dia Only
Providing, installation, testing and commissioning of
Rupees Five Thousand
stainless steel Y-strainer fabricated out of 1.6 mm
212 1.00 Nos. 5,168.17 One Hundred Sixty Eight
thick stainless steel, Grade 304, sheet with 3 mm dia
And Paise Seventeen Only
holes with stainless steel flange. 80mm dia
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
Supplying and fixing 63 mm dia, 15 m long RRL hose
Rupees Five Thousand
pipe with 63 mm dia male and female couplings duly
213 16.00 Nos. 5,509.55 Five Hundred Nine And
bound with GI wire, rivets etc. conforming to IS
Paise Fifty Five Only
(type-A) as required: Gun metal
Supplying and fixing first-aid Hose Reel with MS
construction spray painted in post office red,
conforming to IS 884 complete with the following as
required. 20 mm nominal internal dia water hose Rupees Seventeen
thermoplastic (Textile reinforced) type -2 as per Thousand Two Hundred
IS:12585 20 mm nominal internal dia gun metal globe Four And Paise Thirty
valve & nozzle. Drum and brackets for fixing the Four Only
equipmets on wall. Connections from riser with
mm dia stop gun metal valve & M.S. Pipe and socket.
Rupees One Hundred
Supplying and laying of 4 core x 1.5 sqmm fire survival
215 50.00 Mtr. 121.20 Twenty One And Paise
armoured cable.
Supplying, installing and commissioning Portable Fire
extinguishers of following type & capacity all
conforming to IS 15683 filled in brand new cylinder
Rupees Two Thousand
and rated as per requirement and color coded with
Eight Hundred Fifty Three
216 27.00 suitable mounting arrangements. ABC type fire Nos. 2,853.25
And Paise Twenty Five
extinguisher of 6 Kgs.(Basement parking, Staircases,
Utility, Electrical room, Exec block, Reception, Dining
Area, AHU Rooms & Substation) Stainless steel (S.S
Supplying & erecting carbon dioxide (CO2) fire
extinguisher user of following capacity with necessary Rupees Six Thousand Five
clamps made from 50 x 6 mm M.S. Flat with nut & Hundred Sixty Five Only
bolts grouted in wall complete. 4.5 KG CAPACITY
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
Supply, installation, testing & commissioning of 4 Ltr
Wet Chemical Type (Class K/F) Fire Extinguisher, Rupees Four Thousand
218 1.00 suitable for cooking oil & grease fires in kitchen areas, Nos. 4,545.00 Five Hundred Forty Five
complete with wall mounting bracket, hose, Only
accessories and ISI/BIS certification as required.
Supply, installation, testing and commissioning of
Rupees Three Hundred
219 3.00 Pump on/ off Remote switches to each floor with Nos. 303.00
required accessories.
Supplying, installing, testing and commissioning of
Pressure gauges of suitable range for pump sets and Rupees Two Thousand
220 6.00 pipe lines for the respective floors near to the flow Nos. 2,525.00 Five Hundred Twenty Five
switches with Ball valves, siphon, Fittings like unions/ Only
colors/ reducers etc.Glycerin filled pressure gauges
Supplying & fixing 63 mm dia gun metal short branch
pipe with 20 mm nominal internal diameter size Rupees Four Thousand
221 8.00 nozzle conforming to IS 903 suitable for instantaneous Nos. 4,406.96 Four Hundred Six And
connection to interconnect hose pipe coupling as Paise Ninety Six Only
required: Gun metal
M.S. Hose cabinet stand mounted type fabricated out
of M.S. sheet of 16 swg. with glass fronted (4mm thick
glass with rubber beading) door and size of the
cabinet shall be 600mm x 750 mm x 250 mm Quoted
Rupees Four Thousand
rate shall be includes suitable stand for mounting, all
222 8.00 Nos. 4,545.00 Five Hundred Forty Five
fasteners etc, and cabinet shall be powder coated of
approved colour both inside and out side.
Hose Boxes for external points should be suitable for
Outdoor erection, should have metalic cover over box
so that box can be protected from rain.
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
Providing, fixing, testing and commissioning of gun Rupees Three Thousand
223 2.00 metal air release valve with connection in the riser & Nos. 3,787.50 Seven Hundred Eighty
control valve. Seven And Paise Fifty Only
Providing, fixing, testing & commissioning of 15mm Rupees Six Hundred Four
224 369.00 dia quartzoid bulb type sprinklers of rating 68 0C with Nos. 604.99 And Paise Ninety Nine
required accessories: Only
Rupees Eight Thousand
Providing & fixing flow switch in following sizes M.S.
225 4.00 Nos. 8,149.69 One Hundred Forty Nine
pipe including connection etc as required. 100 mm
And Paise Sixty Nine Only
Supply, Installation, Testing and commissioning of C.I.
Butterfly Valves as per BS 5155 (PN 16) slim seal
standard lever operated type with requried flanges, Rupees Twelve Thousand
nut, bolt, gaskets etc, as per specification. This shall One Hundred Twenty Only
have temper switch for position of valve and should
provide NO/ NC contact with all accessories. 100 mm
Inspectors test assembly
Providing and fixing 25 mm dia inspection & testing Rupees Nine Thousand
227 4.00 with test valve, sight glass, drain valve, (Ball valve Nos. 9,898.00 Eight Hundred Ninety
50mm dia) union with corrosion resistant orifice & Eight Only
connectin to drain (all complete as per drawing)
Wet Alarm valve assembly
Supply, installation, testing and commissioning of UL/
Rupees Eighty Five
FM Approved installation control valve assembly with
228 1.00 Nos. 85,850.00 Thousand Eight Hundred
vertical wet alarm valve with hydraulic alarm motor
gong, 2 nos pressure gauges, test valves 50 mm drain
valves with all necessary accessories.
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
Obtaining NOC from fire license from local fire
authorities and industries authorities upon the client
request and all liasioning activities etc complete in all Rupees Five Thousand
respect. (NOTE: The documents required for getting Fifty Only
NOC from any other department shall also be in the
scope of the contractor).
Point wiring for Light/ Bell with 2-1.5 sq.mm & earth
wire of 1.5 sq.mm (Green) both are of ISI marked
kV grade FRLS PVC insulated multi strand copper
wires up to 10 mtr length, in below type of pipe
erected with 6A Modular type switch/ bell push &
accessories and earth continuity of following type, Rupees Five Hundred
230 1,052.00 erected on PVC/ Metallic/ Wooden box, single Pt. 582.77 Eighty Two And Paise
mounting base frame covered with textured/ Seventy Seven Only
metallic/ white front plate modules erected on/ in
wall/ ceiling as per pipe erected, with necessary Lamp
holder/ ceiling rose/ H.D.Connector as directed.(f)
with medium class Rigid PVC pipe and accessories
erected concealed in wall/ ceiling complete Cat. III
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
Point wiring for FAN with 2-1.5 sq.mm & earth wire of
1.5 sq.mm (Green) both are of.ISI marked 1.1 kV Grade
FRLS PVC insulated multi strand copper wires up to
10 mtr length, in below type of pipe erected with 6A
Modular type switch and hum free EME step type
electronic fan regulator mounted and accessories with
earth continuity of following type erected on PVC/ Rupees Eight Hundred
Metallic/ Wooden box, single mounting base frame Nine And Paise One Only
covered with textured/ metallic/ white front plate
modules erected on/ in wall/ ceiling as per pipe
erected. with necessary ceiling rose/ H.D.Connector as
directed.(f) with medium class Rigid PVC pipe and
accessories erected concealed in wall/ ceiling
complete Cat. III
Point wiring for Individual Plug with & earth wire of
1.5 sq.mm (Green) both are of ISI marked 1.1 kV grade
FRLS PVC insulated multi strand copper wires up to
10 mtr length, in below type of pipe erected complete
with Modular type switch & 5 pin Plug erected on
PVC/ Metallic/ Wooden box covered with appropriate Rupees Six Hundred
front plate modules erected on/ in wall/ ceiling as per Twelve And Paise Six Only
pipe erected with following type of accessories.[I] For
6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire
from nearby switchboard/ mcb db board.(f) with
medium class Rigid PVC pipe and accessories erected
concealed in wall/ ceiling complete Cat. III
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
Supplying & erecting 20 Amp 10 KA ‘C Curve’ single
pole MCB with 20 Amp. Plug socket, company Rupees Five Hundred
233 36.00 fabricated powder coated sheet steel enclosure Ea. 579.74 Seventy Nine And Paise
erected as directed with connection. [A] Metal Clad Seventy Four Only
Socket with metal clad top Cat III
Point wiring for Individual Plug with & earth wire of
1.5 sq.mm (Green) both are of ISI marked 1.1 kV grade
FRLS PVC insulated multi strand copper wires up to
10 mtr length, in below type of pipe erected complete
with Modular type switch & 5 pin Plug erected on
Rupees Eight Hundred
PVC/ Metallic/ Wooden box covered with appropriate
234 180.00 Pt. 894.86 Ninety Four And Paise
front plate modules erected on/ in wall/ ceiling as per
Eighty Six Only
pipe erected with following type of accessories.[II] For
16A Plug and 16 amp switch with 2-2.5 sq.mm Cu.
Wire from mcb db board.(f) with medium class Rigid
PVC pipe and accessories erected concealed in wall/
ceiling complete Cat. III
Providing following type of Modular Type Accessories
mounted with PVC/ metallic/ Wooden box, single
mounting base frame covered with textured/ Rupees Twenty Five And
metallic/ white front plate, modules erected with Paise Twenty Five Only
necessary connections as per site situation directed by
Engineer In charge. (7) Blank Plate Single Cat.III
Point wiring for on board Looped Plug with 6A
Modular type switch & 5 pin socket erected on PVC/
Metallic/ Wooden box, single mounting base frame Rupees Three Hundred
covered with textured/ metallic/ white front plate Nine And Paise Six Only
modules erected on/ in wall/ ceiling with following
type accessories Cat. III
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
Supplying & erecting approved make LAN cable of
Rupees Forty Seven And
237 2,590.00 following size in existing pipe as per direction Mtr 47.47
Paise Forty Seven Only
Providing and erecting ISI mark Medium class RIGID
PVC PIPES of following size complete to be erected
on/ in wall or ceiling erected with necessary PVC Rupees Twenty Four And
fittings & Junction boxes fixed with adhesive solution Paise Twenty Four Only
& Clamps with following dia of pipes, in approved
manner as directed (a)20 mm
Providing and erecting ISI mark Medium class RIGID
PVC PIPES of following size complete to be erected
on/ in wall or ceiling erected with necessary PVC Rupees Thirty Three And
fittings & Junction boxes fixed with adhesive solution Paise Thirty Three Only
& Clamps with following dia of pipes, in approved
manner as directed (b) 25 mm
Providing and fixing approved make Perforated C type
cable tray. Made from pre- galvanized sheet steel. The
cable tray should be bended as per IS 2062/
with max 17.5% perforation with coupler plate/ Fish Rupees Four Hundred
240 250.00 plate and GI hardware like nut - bolt and washers etc. Mtr 471.67 Seventy One And Paise
erected on existing support as per Specification and as Sixty Seven Only
per instruction of engineer in charge..(5) 300 X 50 X
1.5 mm Thick (FOR ELV, ELE, HVAC, FIRE PLACED IN
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
Providing following type of Modular Type Accessories
mounted with PVC/ metallic/ Wooden box, single
Rupees One Hundred
mounting base frame covered with textured/
241 13.00 Ea. 160.59 Sixty And Paise Fifty Nine
metallic/ white front plate, modules erected with
necessary connections as per site situation directed by
Engineer In charge.(8) Computer RJ-45 socket Cat.III
Providing following type of Modular Type Accessories
mounted with PVC/ metallic/ Wooden box, single
mounting base frame covered with textured/
Rupees Two Hundred Ten
242 13.00 metallic/ white front plate, modules erected with Ea. 210.08
And Paise Eight Only
necessary connections as per site situation directed by
Engineer In charge. (3) Two Pin/ RJ-11 Telephone
Socket [B] For Two Gang Cat.III
Providing & erecting Switch board for Computer or
electric apparatus consisting of following modular
type accessories mounted with PVC/ Metallic
concealed/ open box with single mounting base frame
Rupees One Thousand
covered with textured/ metallic/ white front plate,
One Hundred Thirty Three
243 13.00 modules erected with necessary connections as Ea. 1,133.22
And Paise Twenty Two
1 no. 6A/ 16A universal plug-switch combined.
3 nos. 6A Switch
3 nos. 6A 5 pin Plug For Modular Type Accessories
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
Supplying and erecting LED indoor fittings with LEDs
of wattage 0.2 Watt to 0.5 Watt assembled on single
MCPCB, with housing used as a heat sink shall be
made of thick sheet Steel conforming to IS: 513/
CRCA/ aluminium die cast powder coated and high
U.V. & corrosion resistance with diffuser with
company mark/ name 160V to 270V, Power Factor
more than 0.95, THD < 15%, Rupees Three Hundred
244 223.00 CCT 3000 K to 6500K, Ea. 373.70 Seventy Three And Paise
Luminaire efficacy> 85 lumens/ watt, LED Seventy Only
LED driver efficiency > 85 %
(fitting required LM-79 & LM-80 Certificates) (NOTE:
Below description have shown ranges of Wattage
capacity of LED fittings.The Engineer incharge may
select any wattage capacity between the ranges
shown.) (A) Tube Light with integral driver (iv) 22-24
Watts, Surge - 2kV, IP-20, conventional 4 feet Cat-lll
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
Supplying and erecting LED indoor fittings with LEDs
of wattage 0.2 Watt to 0.5 Watt assembled on single
MCPCB, with housing used as a heat sink shall be
made of thick sheet Steel conforming to IS: 513/
CRCA/ aluminium pressure die cast powder coated
and high U.V. & corrosion resistance with diffuser
housed in aluminium casted body with company
160V to 270V, Power Factor more than 0.95, THD <
%, Rupees Four Hundred
245 113.00 CCT 3000 K to 6500K, Ea. 427.23 Twenty Seven And Paise
Luminaire efficacy> 85 lumens/ watt, Twenty Three Only
LED driver efficiency > 85 %
(fitting required LM-79 & LM-80 Certificates)(NOTE:
Below description have shown ranges of Wattage
capacity of LED fittings. The Engineer incharge may
select any wattage capacity between the ranges
shown.) (A) Square/ Circular shaped Surface/
Recessed Mount Downlight with provision for spring
loaded mounting clips complete. IP20 (ii) 11-15 watts,
Surge-2 KV Cat-lll
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
Supplying and erecting LED indoor fittings with LEDs
of wattage 0.2 Watt to 0.5 Watt assembled on single
MCPCB, with housing used as a heat sink shall be
made of thick sheet Steel conforming to IS: 513/
CRCA/ aluminium pressure die cast powder coated
and high U.V. & corrosion resistance with diffuser
housed in aluminium casted body with company
160V to 270V, Power Factor more than 0.95, THD <
%, Rupees Seven Hundred
246 302.00 CCT 3000 K to 6500K, Ea. 758.51 Fifty Eight And Paise Fifty
Luminaire efficacy> 85 lumens/ watt, One Only
LED driver efficiency > 85 %
(fitting required LM-79 & LM-80 Certificates)(NOTE:
Below description have shown ranges of Wattage
capacity of LED fittings.The Engineer incharge may
select any wattage capacity between the ranges
shown.) (A) Square/ Circular shaped Surface/
Recessed Mount Downlight with provision for spring
loaded mounting clips complete.IP20 (iv) 22-24 watts,
Surge-2 KVCat-lll
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
Supplying and erecting LED indoor fittings with LEDs
of wattage 0.2 Watt to 0.5 Watt assembled on single
MCPCB, with housing used as a heat sink shall be
made of thick sheet Steel conforming to IS: 513/
CRCA/ aluminium pressure die cast powder coated
and high U.V. & corrosion resistance with diffuser
housed in aluminium casted body with company
160V to 270V, Power Factor more than 0.95, THD <
Rupees One Thousand
Seven Hundred Ninety
Four And Paise Seventy
Luminaire efficacy> 85 lumens/ watt,
LED driver efficiency > 85 %
(fitting required LM-79 & LM-80 Certificates)(NOTE:
Below description have shown ranges of Wattage
capacity of LED fittings.The Engineer incharge may
select any wattage capacity between the ranges
shown.)(B) LED Panel Light with provision for Plane
front frame with translucent cover fixed to housing
complete.IP20 (vi) 36 watts, 24" x 24", Surge-
Supplying & erecting single phase approved make
industrial exhaust fan suitable for medium duty ring Rupees Two Thousand
248 93.00 mounted low noise operation suitable for medium Ea. 2,054.34 Fifty Four And Paise
duty having following dia size and maximum speed in Thirty Four Only
RPM[A] 300-305 mm dia 900 RPM Cat.II
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
Providing & erecting Approved make Power Saving
- 50 Watt Ceiling Fan with double ball bearing ISI
Rupees One Thousand
mark with Condenser 230 volt A.C. 50 Hz 1200 mm
Nine Hundred Forty Eight
249 232.00 sweep complete having 3blades with aluminium Ea. 1,948.29
And Paise Twenty Nine
blades with, canopy & 30 cm. down rod erected with
earthing. (Make shall be approved by Engineer in
Supplying & erecting fan hook box of 10 mm M.S.
round bar bounded to the RCC bars up to 50mm Rupees One Hundred
250 232.00 length each side and pierced through a 16 Gauge M.S. Ea. 108.07 Eight And Paise Seven
box/ Heavy Duty PVC box complete erected concealed Only
in Ceiling with necessary finishing.
Providing 2.5mm.thick laminated acrylic sheet to Rupees Eighteen And
cover the fan hook or Fan box. Paise Eighteen Only
Supplying and erecting 19/ 20 mm. nominal bore
Rupees One Hundred
Medium Class M.S. Pipe down rod erected duly
252 200.00 Mtr. 108.07 Eight And Paise Seven
painted for fan complete with proper insulation
without leakage and earthing.
Providing & erecting water cooler having storage
capacity 150 Ltr. & cooling capacity 150 Ltr.per hour
@ an ambient temp of 45˚ C. The outlet temp. of the
water should drop by 15˚C within a hour, The water Rupees Sixty One
cooler should be comprising of hermetically sealed Thousand Four Hundred
compressor, fan motor, condensing unit, water tank Eighty Two And Paise
surrounded by evaporating, coil, thermostats, relay Seventy Four Only
etc.complete with necessary inlet & outlet connection.
The body of water cooler will be made from Stainless
Steel and ISI Certified.
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
Supplying & erecting 5 stage single reverse osmosis
water purification system with M.S. powder coated
frame, prefilter housing with 'O' ring presediment
Rupees Twenty Nine
filter GAC filter, carbon filter suitable buster DC pump
Thousand One Hundred
254 8.00 capacity 80 psi, mention with 40 psi inline type post Ea. 29,187.99
Eighty Seven And Paise
carbon filter auto low & high pressure switches with
Ninety Nine Only
following size of storage tank & LPH capacity &
erected as directed [C] 50 Ltr/ Hr with 150 psi 2 nos
providing and erecting Miniature circuit breaker
single pole 6A to 25A suitable to operate on 240 V A.C. Rupees One Hundred
255 606.00 system and having breaking capacity 10 KA to be Ea. 123.22 Twenty Three And Paise
erected in existing box. confirming to IS 8828/ 1996 Twenty Two Only
with ISI Mark Cat.III
providing and erecting Approved make RCCBs
conforming to IS:12640 and having sensitivity of
mA and Short Circuit withstand capacity of 10 KA and
Rupees Two Thousand
suitable for operation on single phase 240 V, 50Hz.
256 100.00 Ea. 2,458.34 Four Hundred Fifty Eight
having characteristic of quick action & tripping with
And Paise Thirty Four Only
all advance feature & do not incorporate any
electronic component. for following Max. rating
erected as directed (ii) 40Amps. DP Cat. III
Providing & erecting 240 V MCB double pole switch
for lighting Load (B Curve) having 10 KA breaking Rupees Three Hundred Six
capacity & confirms to IS: 8828 in existing box having And Paise Three Only
following capacity (A) 6 to 32 Amp. Cat.III
Providing & erecting 415 V MCB Four Pole for Motor &
Rupees Eight Hundred
Inductive Load (C Curve) having 10KA breaking
258 50.00 Ea. 811.03 Eleven And Paise Three
capacity & confirms to IS:8828 in existing box having
following capacity (c)63 Amp Cat.III
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
Providing and erecting Sheet Steel powder coated
MCB distribution board - flush/ surface mounted
fitted with busbar, neutral link, earth bar and DIN rail,
Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without Rupees Three Thousand
259 32.00 MCB to house appropriate nos. of MCBs.(The DBs Ea 3,412.79 Four Hundred Twelve And
should be used of same company of MCB to be used) Paise Seventy Nine Only
suitable for (B) three phase incoming and single phase
horizontal type outgoing Per phase isolation type
(PPI) (b) sheet steel double door (iii)8 way
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
Providing & erecting weather proof, dust & vermin proof,
floor mounted front operated indoor type cubical panel
board necessary IP-42 and above protection as per
approval from engineer incharge made from 14 SWG thick
CRC M.S. sheet for outer body & doors, 16 SWG thick CRC
M.S.sheet for internal partitions with necessary accesories,
supporting angles/ flats channel including cutting, bending,
drilling, welding, riveting with internal partitions & cable
alley as per requirements & instruction of engineer-in-
charge with erection of supplied switch gears, BUSBARS,
suitable size of inter connecting PVC copper wire/ copper-
aluminium strips, rubber grommets, rib, bakelite control
Rupees Sixteen Thousand
fuses/ MCB for measuring instruments, earth bus & earth
260 11.00 Sq Mtr 16,392.30 Three Hundred Ninety
bolts, foundation flange - bolts-base Plates, sufficient nos.
of hinged doors, handles with locking arrangement and Two And Paise Thirty Only
rubber gasket, heavy duty end terminal connection, danger
notice board, necessary ventilation, earthing strip
complete. The Panel shall be painted with epoxy powder
coating. (The rates excludes the cost of switchgears, bus
bars, inter connecting mains & Copper Aluminium strips,
meters, Fuses etc. The dimension shall be measured
excluding base beams) The panel shall be supplied with
following approved manufacturers with following size.
(C) The standard companies switch gear shall be used and
only manufacturers as per IEC 61439 for beneficial use. (i)
with 350mm depth
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
Providing & erecting weather proof, dust & vermin
proof, floor mounted front operated indoor type cubical
panel board necessary IP-42 and above protection as per
approval from engineer incharge made from 14 SWG
thick CRC M.S. sheet for outer body & doors, 16 SWG
thick CRC M.S.sheet for internal partitions with
necessary accesories, supporting angles/ flats channel
including cutting, bending, drilling, welding, riveting
with internal partitions & cable alley as per
requirements & instruction of engineer-in-charge with
erection of supplied switch gears, BUSBARS, suitable
size of inter connecting PVC copper wire/ copper-
aluminium strips, rubber grommets, rib, bakelite control Rupees Twenty One
fuses/ MCB for measuring instruments, earth bus & Thousand Three Hundred
earth bolts, foundation flange - bolts-base Plates, Twenty Seven And Paise
sufficient nos. of hinged doors, handles with locking Sixteen Only
arrangement and rubber gasket, heavy duty end
terminal connection, danger notice board, necessary
ventilation, earthing strip complete. The Panel shall be
painted with epoxy powder coating. (The rates excludes
the cost of switchgears, bus bars, inter connecting mains
& Copper Aluminium strips, meters, Fuses etc. The
dimension shall be measured excluding base beams) The
panel shall be supplied with following approved
manufacturers with following size.
(C) The standard companies switch gear shall be used
and only manufacturers as per IEC 61439 for beneficial
use.(i) with 550mm depth
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
Providing and erecting Approved make Four pole
moulded case circuit breaker having breaking capacity
ICU of 25 KA. at 415 V, having normal current rating Rupees Six Thousand
up to 25 A to 100A. with Fixed thermal & magnetic Seven Hundred Ninety
release suitable to work on A.C. supply 50 Hz. with all And Paise Twenty Three
internal connections, spreader tinned copper & Only
complete erected in existing 16 G.M.S. housing.
ICS=100% of ICU only Cat III
Providing and erecting Approved make Four pole
moulded case circuit breaker having breaking capacity
ICU of 35 KA. at 415 V. having normal current rating Rupees Eight Thousand
125A. with Fixed thermal & magnetic release suitable Eight Hundred Sixty One
to work on A.C.supply 50 Hz. with all internal And Paise Seventy Four
connections, spreader tinned copper & complete Only
erected in existing 16 G.M.S. housing. ICS=100% of ICU
Providing and erecting Approved make Four pole
moulded case circuit breaker having breaking capacity
ICU of 35 KA. at 415 V. having Normal current rating Rupees Seventeen
200A.with variable Thermal & magnetic release Thousand Eight Hundred
suitable to work on A.C.supply 50 Hz. with all internal Forty Three And Paise
connections, spreader tinned copper & complete Sixty Seven Only
erected in existing 16 G.M.S.housing ICS=100% of ICU
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
Providing and erecting Approved make Four pole
moulded case circuit breaker having breaking capacity
ICU of 50 KA and above at 415 V having Normal Rupees Twenty Seven
current rating 400A. with variable Thermal & Thousand Seven Hundred
magnetic release suitable to work on A.C.supply 50 Hz. Fifty One And Paise
With all internal connections, spreader tinned copper Seventy Seven Only
& complete erected in existing 16 G.M.S. housing.
ICS=100% of ICU only Cat III
Providing and erecting Approved make Earth fault
Relay suitable to mount with inter connection suitable
Rupees Five Thousand
to following size of moulded case circuit breaker
Nine Hundred Fifty Six
266 1.00 having CT ratio & MCCB rating as following along with Ea. 5,956.98
And Paise Ninety Eight
shunt trip 220V AC. with all internal connections &
complete erected in existing M.S.housing.. (3) 250 A -
400 A, CT Ratio 1/
Supplying and erecting triple pole & neutral 440V/
500V panel mounting Aluminium Busbars with four
equal Nos. of bus having current density not more
than 0.8 Amp./ sq.mm (Rated current/ cross section
area) duly wrapped with colour insulating tape for Rn.Mt Rupees Six Hundred Sixty
phase sequence of following current carrying capacity, r And Paise Fifty Four Only
erected with necessary bus bar supports/ insulators,
main cable socket to each busbar, erected in existing
cubical panel with necessary connections. (A) Suitable
for 100 Amp. Capacity
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
Supplying and erecting triple pole & neutral 440V/
500V panel mounting Aluminium Busbars with four
equal Nos. of bus having current density not more
than 0.8 Amp./ sq.mm (Rated current/ cross section
Rupees One Thousand
area) duly wrapped with colour insulating tape for Rn.Mt
268 9.00 1,037.27 Thirty Seven And Paise
phase sequence of following current carrying capacity, r
Twenty Seven Only
erected with necessary bus bar supports/ insulators,
main cable socket to each busbar, erected in existing
cubical panel with necessary connections. (B) Suitable
for 200 Amp. Capacity
Supplying and erecting triple pole & neutral 440V/
500V panel mounting Aluminium Busbars with four
equal Nos. of bus having current density not more
than 0.8 Amp./ sq.mm (Rated current/ cross section
Rupees One Thousand
area) duly wrapped with colour insulating tape for Rn.Mt
269 7.00 1,469.55 Four Hundred Sixty Nine
phase sequence of following current carrying capacity, r
And Paise Fifty Five Only
erected with necessary bus bar supports/ insulators,
main cable socket to each busbar, erected in existing
cubical panel with necessary connections. (C) Suitable
for 300 Amp. Capacity
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
Providing and erecting multifunctional meter suitable
for application of Power monitoring and showing
measurement of following Voltage, Frequency,
Apparent energy, Apparent power, Active and reactive
energy, Active and reactive power, Average voltage
Vavg, Peak demand power PM, QM, SM, Demand
power P, Q, S, Apparent power S, S1, S2, S3, Unbalance
current, Power factor and displacement PF (signed,
Rupees Fourteen
four quadrant), Calculated neutral current, Active,
Thousand One Hundred
270 5.00 reactive, apparent energy (signed, four quadrant), Ea 14,123.84
Twenty Three And Paise
Active power P, P1, P2, P3, Voltage U21, U32, U13, V1,
Eighty Four Only
V2, V3, Phase currents, Average current Iag, Peak
demand currents, Reactive power Q, Q1, Q2, Q3,
Demand current I1, I2, I3, [Us] rated supply voltage
40...300 V AC 45...65 Hz, 40...300 V DC, Network
frequency 50 Hz, Type of network 3P, Display type
segments LED, Display colour Red, Messages display
capacity 3 fields of 4 characters, Display digits
digit(s) - 14.2 mm in height
Supplying and erecting approved make suitable panel
Rupees Forty Three And
271 15.00 indicator LED type lamp, lens cover, complete erected Ea 43.43
Paise Forty Three Only
with necessary connections.
Supplying & erecting approved make Four Pole 415V Rupees Twenty Two
change over switch interior for panel mounting with Thousand Two Hundred
operating mechanism A.C.23 duty confirming to IS for Fifty Five And Paise Thirty
(F)400A Cat. III Five Only
Providing and erecting metallic vitrified danger notice
board as per language suggested by engineer incharge Rupees Sixty Nine And
for MEDIUM VOLTAGE installation to be erected as Paise Sixty Nine Only
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
Supplying and erecting approved make Octagonal pole
made from HR sheet steel. The pole should be made as
per IS. and shall be coated with hot dip galvanizing as
per IS 2629/ 2633/ 4759, suitable suspend local wind
speed with integral Junction box consist of terminal
plate of min 6mm Hylam sheet, standard profile
35mmX7.5mm Din-Rail for MCB Mounting, stud type Rupees Nine Thousand
274 20.00 terminal and arrangement for cable termination to be Ea. 9,011.22 Eleven And Paise Twenty
erected With Suitable foundation (Included) as per Two Only
details given by manufacturer considering site
requirement.(D) 6 Mtr. Long 70 mm Top X 135 mm
bottom dia, 3 mm thickness with
200mmX200mmX12mm base plate, 4-M20 Bolts and
600mm long with necessary G.I. J Bolts.Approx Pole
Providing and erecting Street Light pole bracket
comprising main B Class MS pipe of 4.2 cm/ require
outside dia. complete with suitable B Class M.S. sleeve
tubing of approx. 45cms.length and suitable for
mm/ 80mm/ required size of pole top having
Rupees Six Hundred
sufficient fasteners for fixing the brackets and having
275 20.00 Ea 626.20 Twenty Six And Paise
spread of 1.5.mtr. length with 110 deg.with vertical
plane & suitable welded stays, reducer and with check
nuts complete painted with one coat of Red oxide/ PU
base primer and two coats of Aluminium/ PU paint.
paint with following nos of arms. [A] Single Arm
Bracket 1.5 Mtr
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
Providing 1:2:4 cement concrete foundation & 70 %
PCC from bottom including excavation for the pole of
size 45 x 45 x 100 cm. Deep in below ground level with
Rupees Eight Hundred
276 20.00 plinth of 45 cm x 45 cm (or 45 cm dia x 45 cm) high Ea. 809.01
Nine And Paise One Only
upper ground level with necessary curing and
finishing in approved manner.
(for 4 & 6 mtr pole)
Supplying and erecting LED street light/ Flood light
fittings with High power White LEDs wattage of
Watt and above assembled on single MCPCB,
efficiency more than 130 lm/ w and corrosion free
High pressure die cast aluminum housing with smooth
finish powder coated and heat sink extruded
aluminium with diffuser and Polycarbonate optics/
lenses, with toughened glass with company mark/
name engraved or embossed 160 to 270 V, Power
Factor more than 0.95, THD < 10 %, CCT 3000 K to Rupees Five Thousand
277 20.00 5700K, Uniformity ratio >0.45, Luminaire efficacy> Ea. 5,581.26 Five Hundred Eighty One
100 lumens/ watt. LED driver efficiency > 85 And Paise Twenty Six Only
%.(fittings required LM-79 & LM-80
certificates)(NOTE: Below description have shown
ranges of Wattage capacity of LED fittings.The
Engineer incharge may select any wattage capacity
between the ranges shown.)(A) Street Light (IP-65),
Surge protection - 4KV integral and 10 kv non integral,
Light must have 440VAC line supply protection. It
should withstand 48 hours for 440VAC line supply.(iv)
90 - 119 watts Cat-lll
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
Supplying & erecting IP 55 grade following size
section pillar fabricated from joint less M.S. Sheet with
angle iron legs made from jointless M.S. Angle with
cable clamps to be buried in ground to have
appropriate erection to work uniform until erected
with cement concrete foundation and 45 cm high
bricks work finishing with plaster etc. hinged double
door internally supported on both side, with internal
Rupees Three Thousand
and outside looking arrangement with lock and keys
278 1.00 Ea 3,595.60 Five Hundred Ninety Five
in duplicate 35 x 35 x 5 mm M.S. Angle of Two Nos.
And Paise Sixty Only
one is welded and other with nut and bolt for erecting
Bakelite sheet. Painting the Section Pillar inside and
out side with three tank powder coated paint. section
pillar roof should be without joint with water leakage
proof & tested as per IP 55 test & followed by IS
of 1962 (B) 75 X 60 X 45 cm section pillar fabricated
from 16 Gauge MS Sheet with angle iron legs 45 cm
long made from 35 X 35 X 5 mm thick MS angle.
Supplying & erecting approved make IP 55 grade
Company fabricated Timer Panel of following capacity
for switch On-Off street lights on time scheduling basis
made from 16G CRCA sheet duly epoxy power painted Rupees Twelve Thousand
inside and outside with hinged doors and locking Three Hundred Ninety
arrangement consisting of suitable size of 4 Pole MCB Nine And Paise Seventy
and 4 pole contactor (cat-III)with analog time switch, Seven Only
auto manual switch of same make and suitable input
and output Bakelite terminals and with door earthing
approved by Engineer in charge. (A) 32 Amp
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
Providing and erecting Mains with 1.1 kV grade FRLS
PVC insulated ISI marked stranded Copper conductor
wire in following type of pipe to be erected concealed
in/ flushed on wall/ ceiling, with 1.5 sq. mm copper Rupees One Hundred Four
conductor FRLS PVC insulated stranded wire of green And Paise Three Only
colour for earth continuity of following size.(A) with
medium class Rigid PVC pipe and accessories.(b)
wire 2.5 sq. mm
providing and erecting Mains with 1.1 kV grade FRLS
PVC insulated ISI marked stranded Copper conductor
wire in following type of pipe to be erected in/ on Rupees One Hundred
281 2,520.00 wall/ ceiling with 2.5 sq. mm copper conductor FRLS Mtr 140.39 Forty And Paise Thirty
PVC insulated stranded wire of green colour for earth Nine Only
continuity of following size(A) with medium class
Rigid PVC pipe and accessories.(a) 2 wire 4 sq. mm
Providing and erecting FRLS-XLPE(IS:7098)(I)-88 ISI
armoured cable multistrand Copper conductor for 1.1 Rupees Eight Hundred
282 120.00 kV. to be laid on wall with necessary clamps or in Mtr 846.38 Forty Six And Paise Thirty
existing trench/ pipe at road crossing or floor of Eight Only
following size of cables.(A) 4 core 10 Sq. mm
Providing and erecting FRLS-XLPE(IS:7098)(I)-88 ISI
armoured cable multistrand Aluminium conductor for Rupees Four Hundred
283 100.00 1.1 kV. to be laid on wall with necessary clamps or in Mtr 454.50 Fifty Four And Paise Fifty
existing trench/ pipe of following size of cables (D) 3 Only
1/ 2 core 70 Sq. mm (35 Sq. mm 1/ 2 core)
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
Providing and erecting FRLS-XLPE(IS:7098)(I)-88 ISI
armoured cable multistrand Aluminium conductor for Rupees Six Hundred Forty
284 80.00 1.1 kV. to be laid on wall with necessary clamps or in Mtr 648.42 Eight And Paise Forty Two
existing trench/ pipe of following size of cables (F) 3 Only
1/ 2 core 120 Sq. mm (70 Sq. mm 1/ 2 core)
Providing and erecting FRLS-XLPE (IS:7098)(I)-88 ISI
armoured cable multistrand/ Solid Aluminium
Rupees One Hundred Fifty
285 450.00 conductor for 1.1 kV. to be laid on wall with necessary Mtr 151.50
One And Paise Fifty Only
clamps or in existing trench/ pipe of following size of
cables (B) 4 core 6 Sq. mm
Providing and erecting FRLS-XLPE (IS:7098)(I)-88 ISI
armoured cable multistrand/ Solid Aluminium Rupees One Hundred
286 300.00 conductor for 1.1 kV. to be laid on wall with necessary Mtr 168.67 Sixty Eight And Paise Sixty
clamps or in existing trench/ pipe of following size of Seven Only
cables (C) 4 core 10 Sq. mm
Providing and erecting FRLS-XLPE (IS:7098)(I)-88 ISI
armoured cable multistrand Aluminium conductor for Rupees One Hundred
287 250.00 1.1 kV. to be laid on wall with necessary clamps or in Mtr 184.83 Eighty Four And Paise
existing trench/ pipe of following size of cables (A) 4 Eighty Three Only
Providing and erecting FRLS-XLPE (IS:7098)(I)-88 ISI
armoured cable multistrand Aluminium conductor for Rupees Two Hundred
288 350.00 1.1 kV. to be laid on wall with necessary clamps or in Mtr 229.27 Twenty Nine And Paise
existing trench/ pipe of following size of cables (B) 4 Twenty Seven Only
Providing and, fixing heavy duty flange type brass
cable gland with rubber ring for PVC insulated
Rupees Thirty Eight And
289 17.00 armoured cable complete with out going tails, Ea. 38.38
Paise Thirty Eight Only
insulating tape etc for following size of cables.(B) 2 to
4 core 6 Sq. mm
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
Providing and, fixing heavy duty flange type brass
cable gland with rubber ring for PVC insulated
Rupees Thirty Eight And
290 18.00 armoured cable complete with out going tails, Ea. 38.38
Paise Thirty Eight Only
insulating tape etc for following size of cables. (C) 2 to
4 core 10 Sq. mm
Providing and, fixing heavy duty flange type brass
cable gland with rubber ring for PVC insulated
Rupees Forty Seven And
291 32.00 armoured cable complete with out going tails, Ea. 47.47
Paise Forty Seven Only
insulating tape etc for following size of cables. (C) 2 to
4 core 16Sq. mm
Providing and, fixing heavy duty flange type brass
cable gland with rubber ring for PVC insulated
Rupees Fifty One And
292 32.00 armoured cable complete with out going tails, Ea. 51.51
Paise Fifty One Only
insulating tape etc for following size of cables. (E) 2 to
4 core 25 Sq. mm
Providing and, fixing heavy duty flange type brass
double compression type cable gland with rubber ring
Rupees One Hundred
293 8.00 for PVC insulated armoured cable complete with out Ea. 103.02
Three And Paise Two Only
going tails, insulating tape etc for following size of
cables.(C) 3 & 1/ 2 core 70 Sq. mm
Providing and, fixing heavy duty flange type brass
double compression type cable gland with rubber ring Rupees One Hundred
294 6.00 for PVC insulated armoured cable complete with out Ea. 140.39 Forty And Paise Thirty
going tails, insulating tape etc for following size of Nine Only
cables. (E) 3 & 1/ 2 core 120 Sq. mm
Providing and, fixing heavy duty flange type brass
double compression type cable gland with rubber ring Rupees Two Hundred
295 4.00 for PVC insulated armoured cable complete with out Ea. 247.45 Forty Seven And Paise
going tails, insulating tape etc for following size of Forty Five Only
cables. (H) 3 & 1/ 2 core 240 Sq. mm
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
Solder less crimping type Copper lugs conforming to
IS suitable for cable of following size evenly crimped
Rupees Ten And Paise Ten
296 40.00 with high pressure tool & connected to switchgear Ea. 10.10
terminals with brass/ cadmium plated nut bolts in an
approved manner. (B) 10 Sq.mm
Solder less crimping type Aluminium lugs conforming
to IS suitable for cable of following size evenly
Rupees Six And Paise Six
297 32.00 crimped with high pressure tool & connected to Ea. 6.06
switchgear terminals with brass/ cadmium plated nut
bolts in an approved manner. (A) 1.5/ 2.5/ 4/ 6 Sq.mm
Solder less crimping type Aluminium lugs conforming
to IS suitable for cable of following size evenly
Rupees Thirteen And
298 32.00 crimped with high pressure tool & connected to Ea. 13.13
Paise Thirteen Only
switchgear terminals with brass/ cadmium plated nut
bolts in an approved manner. (B) 10 Sq.mm
Solder less crimping type Aluminium lugs conforming
to IS suitable for cable of following size evenly
Rupees Fifteen And Paise
299 128.00 crimped with high pressure tool & connected to Ea. 15.15
switchgear terminals with brass/ cadmium plated nut
bolts in an approved manner. (C) 16/ 25 Sq.mm.
Solder less crimping type Aluminium lugs conforming
to IS suitable for cable of following size evenly
Rupees Twenty And Paise
300 8.00 crimped with high pressure tool & connected to Ea. 20.20
switchgear terminals with brass/ cadmium plated nut
bolts in an approved manner. (D) 35/ 50 Sq.mm.
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
Solder less crimping type Aluminium lugs conforming
to IS suitable for cable of following size evenly
Rupees Twenty Five And
301 22.00 crimped with high pressure tool & connected to Ea. 25.25
Paise Twenty Five Only
switchgear terminals with brass/ cadmium plated nut
bolts in an approved manner. (E) 70 Sq.mm.
Solder less crimping type Aluminium lugs conforming
to IS suitable for cable of following size evenly
Rupees Forty Five And
302 20.00 crimped with high pressure tool & connected to Ea. 45.45
Paise Forty Five Only
switchgear terminals with brass/ cadmium plated nut
bolts in an approved manner. 120 Sq.mm.
providing and erecting Mains with ISI marked, 1.5kV
grade electrolyte multi stranded, annealed copper
conductor with heat resistant PVC insulated conforms
to IS 694, IEC - 227 erected in existing pipe of Rupees Twenty Two And
following size (Specifically for control panel, relays, Paise Twenty Two Only
power switchgears, motor starters & control wiring)
with required size of copper lugs, nuts and bolts if
required.(b) One wire 1.50 sq. mm
providing and erecting Mains with ISI marked, 1.5kV
grade electrolyte multi stranded, annealed copper
conductor with heat resistant PVC insulated conforms
to IS 694, IEC - 227 erected in existing pipe of Rupees Thirty Four And
following size (Specifically for control panel, relays, Paise Thirty Four Only
power switchgears, motor starters & control wiring)
with required size of copper lugs, nuts and bolts if
required. (c) One wire 2.50 sq. mm
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
providing and erecting Mains with ISI marked, 1.5kV
grade electrolyte multi stranded, annealed copper
conductor with heat resistant PVC insulated conforms
to IS 694, IEC - 227 erected in existing pipe of Rupees Seventy And Paise
following size (Specifically for control panel, relays, Seventy Only
power switchgears, motor starters & control wiring)
with required size of copper lugs, nuts and bolts if
required. One wire 6.00 sq. mm
providing and erecting Mains with ISI marked, 1.5kV
grade electrolyte multi stranded, annealed copper
conductor with heat resistant PVC insulated conforms
Rupees One Hundred
to IS 694, IEC - 227 erected in existing pipe of
306 45.00 Mtr 115.14 Fifteen And Paise
following size (Specifically for control panel, relays,
power switchgears, motor starters & control wiring)
with required size of copper lugs, nuts and bolts if
required.. (f) One wire 10.00 sq. mm
Making trench in soft soil of suitable width of 90 cm
deep for laying cable or locating the fault all over the Rupees Fifty Five And
run and back filling the same and making the surface Paise Fifty Five Only
as normal ground.
Providing & laying approved make Double walled
corrugated pipes (DWC) of polyethylene(conforming
to IS 14930 II)with necessary connecting accessories Rupees Sixty Two And
of same material at required depth in existing trench Paise Sixty Two Only
for laying of cable. below ground/ road surface for
enclosing cable (A)50 mm outer dia.
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
Providing & laying approved make Double walled
corrugated pipes (DWC) of polyethylene(conforming
to IS 14930 II)with necessary connecting accessories Rupees Ninety Five And
of same material at required depth in existing trench Paise Ninety Five Only
for laying of cable. below ground/ road surface for
enclosing cable (C))90 mm outer dia
Providing and erecting ISI marked PVC insulated PVC
Rupees Two Hundred
Sheathed Flat flexible Submersible copper cable
310 80.00 Mtr. 295.93 Ninety Five And Paise
approved make of following Size. (E) 3 Core x 10 Sq.
Ninety Three Only
Providing and erecting ISI marked PVC insulated PVC
Rupees Four Hundred
Sheathed Flat flexible Submersible copper cable
311 150.00 Mtr. 488.84 Eighty Eight And Paise
approved make of following Size. (F) 3 Core x 16 Sq.
Eighty Four Only
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
Supplying & erecting earth pit of minimum bore
dia.150mm size approved make Earthing Electrode
consisting Pipe-in-Pipe Technology as per IS 3043-
1987 made of corrosion free hot dipped G.I.Pipes
having Outer pipe dia of 50mm having 80-200 Micron
galvanising, Inner pipe dia of 25 mm having 200-250
Micron galvanising, connection terminal dia of 12mm
with constant ohmic value surrounded by highly
conductive compound with high charge dissipation
suitable for following type of applications with
chamber and heavy duty cover. (A)(approved make
OEM has to submit test certificate including value of
Rupees Five Thousand
earth resistance of installation duly stamped and
312 12.00 Ea. 5,760.03 Seven Hundred Sixty And
signed by agency and officer Incharge has to ensure
Paise Three Only
the value of earthing resistane mentioned in test
Certificate) & having back filling compound of (B)
Inner chemical (CCM Compound)- Resistivity:-
ohm/ meter testing as per IEC 62561-2017, Voltage
drop: < 1 volt at no load & dry form, Sulphar content:
<2% (C) Back fill Compound: Earthing compound
should be capable to retain moisture for long time
Necessary test report must be submitted by Agency.
(b)For Electrical installation up to 11 KV in normal
Length of Pipe:2.00 mtrs
Back filling Compound:1 no. Bag of 25 Kg.
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
Supplying & erecting earth pit of minimum bore
dia.150mm size approved make Earthing Electrode
consisting Pipe-in-Pipe Technology as per IS 3043-1987
made of corrosion free hot dipped G.I.Pipes having Outer
pipe dia of 50mm having 80-200 Micron galvanising,
Inner pipe dia of 25 mm having 200-250 Micron
galvanising, connection terminal dia of 12mm with
constant ohmic value surrounded by highly conductive
compound with high charge dissipation suitable for
following type of applications with chamber and heavy
duty cover. (A)(approved make OEM has to submit test
certificate including value of earth resistance of
installation duly stamped and signed by agency and Rupees Eight Thousand
313 4.00 officer Incharge has to ensure the value of earthing Ea. 8,636.51 Six Hundred Thirty Six
resistane mentioned in test Certificate) & having back And Paise Fifty One Only
filling compound of (B) Inner chemical (CCM
Compound)- Resistivity:- 0.2 ohm/ meter testing as per
IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry
form, Sulphar content:- <2%(C) Back fill Compound:-
Earthing compound should be capable to retain
moisture for long time Necessary test report must be
submitted by Agency. (c) For Electrical Installation
covering Transformer Neutrals, Lightning arrester
Earthing, A.C.Plant & Sensitive Computer System(like
Automation, SCADA) i.e independent Earthing in normal
Length of Pipe: 3.00 mtrs
Providing and erecting Pipe type earthing having
Rupees Three Hundred
cms.long and 2.5 cms. dia. galvanised iron pipe with
314 20.00 Ea. 368.65 Sixty Eight And Paise Sixty
coupling and buch buried in specially prepared earth
pit complete with necessary 8 SWG earth wire.
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
Providing and erecting required size HOT deep
Rupees Seventy Seven
Galvanised iron strip for earthing of H.T., OCB/ ACB/
315 80.00 Kg 77.77 And Paise Seventy Seven
Transformer LT panel board, Motors etc. using proper
Rupees Seventy Seven
Providing and erecting HOT deep Galvanised iron
316 80.00 Kg 77.77 And Paise Seventy Seven
strip/ wire 4.064mm to 1.626mm.
S.I.T.C. submersible pump set for bore of 200 mm. dia.
Rupees One Lakh(s)
or more having 3 phase motor capacity about 50-55
Twenty Nine Thousand
H.P discharge capacity having. Lifting and Lowering
317 1.00 Ea. 1,29,252.73 Two Hundred Fifty Two
taken extra. (A) (13 Stage) 100 to 400 L.P.M. discharge
And Paise Seventy Three
at the head 182 to 265 mtrs. suitable for 80 mm dia.
Supplying and erecting Fully Automatic hydro
pneumatic booster system with cast iron housing
Enclosure class IP44 minimum, with built in PTO
motor protection and stainless steel impeller pump,
pump modelGRUNDFOS CMB 5-46 series or
equivalent one pump working and one standby for
support with following specifications: i) Power
2.25kw/ 3 HP, 3 Phase ii) Flow rtate -12cm2 iii)
Rupees Two Lakh(s) Forty
working pressure -4.5 to 5 kg iv) GI inlet & outlet
318 1.00 Ea. 2,41,031.45 One Thousand Thirty One
header size 40/ 80 mm, outlet 50 mm with NRV,
And Paise Forty Five Only
Pressure switch, pressure transmission, pressure
gauge & other required accessories with necessary
Plumbing work of suction and delivery pipe which
includes all required size of pipes, Joints valves,
Bypass valve, labor all accessories required for
installation of pressure pump (Foundation work and
base stand cost included) along with Panel HMI PLC
with VFD with necessary switchgears and cable.
Item Estimated Rate
Quantity Item Descriptionan Unit Total Amount
Quantity Item Descriptionan Unit Total Amount
No. Rate in Figures Rate in Words
Supplying and erecting approved make3 phase motor
control panel (ATS) made from 16 G. CRCA sheet duly
painted with epoxy power paint inside and outside
with hinged doors and locking arrangement,
consisting, of suitable switch of AC 23 duty with HRC
fuses (Cat.III), starting and running contactors,
overload relay, Automatic water level controller, Rupees Fifty Five
Electronic timer with master timer CT operated Thousand Seven Hundred
Ammeter with selector switch, Voltmeter with Eighty Six And Paise
selector switch, phase indicating lamps, single phasing Thirty Four Only
preventer, water level guard, over load, start, run and
stop push buttons, air cooled auto transformer with
60%, 70%, 80% tapping, Panel to be erected on angle
iron frame grouted on wall as directed., contactors
relays, timer etc. shall be of L & T Siemens/ Cutler
Hammer make. (E) Suitable for 50 H.P.
Supplying & erecting approved make Automatic liquid
level controller 6A. with sensor testing as per Rupees Two Thousand
320 1.00 instruction of Engineer in charge on site complete Ea 2,355.32 Three Hundred Fifty Five
with wiring connection with existing wires, with And Paise Thirty Two Only
copper conductor from pump to upper and lower tank.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
FIRST FLOOR PLAN.pdf
GROUND FLOOR PLAN.pdf
SECOND FLOOR PLAN.pdf
THIRD FLOOR PLAN.pdf
21B. FRIST FLOOR PLAN.pdf
21C. SECOND FLOOR PLAN.pdf
21D. THIRD FLOOR PLAN.pdf
2. SCHEDULE-B.pdf
3. INDEX SPECIFICATION.pdf
4. SBD.pdf
5. CIVIL SPECIFICATION.pdf
11. MAKE LIST_Part1.pdf
11. MAKE LIST_Part2.pdf
11. MAKE LIST_Part3.pdf
11. MAKE LIST_Part4.pdf
11. MAKE LIST_Part5.pdf
11. MAKE LIST_Part6.pdf
11. MAKE LIST_Part7.pdf
12. BUILDING SPECIFICATION.pdf
13. ELECTRICAL SPECIFICATION.pdf
14. APPLICABLE IS CODE.pdf
19. DRAFT LETTER.pdf
20B. GR SPECIAL CONDITION_Part1.pdf
20B. GR SPECIAL CONDITION_Part2.pdf
20B. GR SPECIAL CONDITION_Part3.pdf
20C. GR CLAUSE 24 34 52 SD RELEASE.pdf
20-Special Conditions-27-05-2026.pdf
Insurance Clause-03-11-2025.pdf
Standard Specification for Electrical Work.pdf
Tender Details-89-01.pdf
21A. GROUND FLOOR PLAN.pdf
20A. GR AMC.pdf
Performance Bond and Bitumen date.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .