Swarnim Jayanti Mukhya Mantri Saheri Vikas Yojna(SJMMSVY)

It No. but maybe item of work Unit Rate(without

STRUCTURAL WORKS

Excavation for foundation upto 1.5 m depth including sorting out

1.00 4434.38 and stacking of useful materials and disposing off the excavated CUM 124.61

stuff upto 50 Meter lead.(A) Loose or soft soil

Excavation for foundation for depth from 1.5 m to 3.0m including

2.00 4434.38 sorting out and stacking of useful materials and disposing off the CUM 136.68

excavated stuff upto 50 Meter lead.(A) Loose or soft soil

Excavation for foundation for depth from 3.0 m to 5.0 m including

3.00 4312.50 sorting out and stacking of useful materials and disposing off the CUM 185.44

excavated stuff upto 50 Meter lead.(B) Dense or Hard soil

Boring holes 3.5 m deep in ordinary soil (for cast in situ piles) and

getting out the soil and disposal of the surplus excavated soil as

directed within a lead of 50 Meter for following diameter of

pipes.(iii) 300 mm

(ii) Uncoursed Rubble Masonry with hard stone of approved

5.00 19.24 quality in foundations and plinth in Cement Mortar 1:5 (1-cement : CUM 2609.05

5-coarse sand including levelling up etc. complete

Providing Supplying and laying Filling in foundation, plinth, trench

and uneven area of plot (for levelling and maintianing slop) with

6.00 2875.00 murrum or selected soil in layers of 20 cm. Thickness. Including CUM 301.58

levelling, watering, ramming and consolidating etc.As dirceted

Providing and laying ordinary cement concrete M-150 and curing

complete including the cost of form work but excluding the cost

of reinforcement for reinforced concrete work in Bases of Flooring

and the like and Mass concrete. For PCC

Providing laying Controled Reinforced cement concrete M- 25 using

minimum Cement content @ 450 kg/Cmt including curing etc

complete including the cost of form work but excluding cost of

reinforcement for reinforced concrete work in concrete road Coarse

and fine aggregate confirming to IS:383 maximum size of coarse

aggregate not exceeding 25 mm, using mechanical weigh batcher,

mixed as per approved mix design, laid, placed & distributed with

sufficient man power using M.S. Side Rail of road thickness with

8.00 491.25 necessary nut bolt plates, fixing as per width, compacted with Poker CUM 5500.00

vibrator V.D. system ( Trimix ) & Surface Plate Vibrator, Troweling to

be carried out with the same machine running on troweling blades,

finished in a continuous operation including provision of contraction,

expansion, construction and longitudinal joints, joint filler separation

membrane, sealant primer, joint sealant debonding strip, dowel bar,

tie rod, Surface Hardner must be spread on final concrete surface to

harden the top surface, admixtures as approved, curing compound,

finishing to lines and grades including form work.

estimated tendered

It No. but maybe item of work Unit Rate(without

Providing and laying controlled cement concrete M-250 and curing

complete including the cost of form work but excluding the cost of

reinforcement for reinforced concrete work in : (a) Foundations,

footings Bases of columns and raft slab

Providing and laying controlled cement concrete M-200 for R.C.C.

10.00 16.68 bored piles including ramming, vibrating, curing and finishing CUM 4639.10

Providing and laying controlled cement concrete M-250 and curing

complete including the cost of form work but excluding the cost of

reinforcement for reinforced concrete work in Columns, pillars, posts

and struts for columns UP TO GROUND FLOOR

Providing and laying controlled cement concrete M-250 and curing

complete including the cost of form work but excluding the cost of

reinforcement for reinforced concrete work in Columns, pillars, posts

and struts for FIRST FLOOR

Providing and laying controlled cement concrete M-250 and curing

complete including the cost of form work but excluding the cost of

reinforcement for reinforced concrete work in Columns, pillars, posts

and struts for SECOND FLOOR

Providing and laying controlled cement concrete M-250 and curing

complete including the cost of form work but excluding the cost of

14.00 63.35 reinforcement for reinforced concrete work in Columns, pillars, posts CUM 8353.00

and struts for THIRD AND TERRACE FLOOR UP TO CABIN TOP all floor

above floor two level

Providing and laying controlled cement concrete M-250 and curing

complete including the cost of form work but excluding the cost of

reinforcement for reinforced concrete work in Beams, girders and

cantilever up to floor For GROUND FLOOR

Providing and laying controlled cement concrete M-250 and curing

complete including the cost of form work but excluding the cost of

reinforcement for reinforced concrete work in Beams, girders and

cantilever up to floor For FIRST FLOOR

Providing and laying controlled cement concrete M-250 and curing

complete including the cost of form work but excluding the cost of

reinforcement for reinforced concrete work in Beams, girders and

cantilever up to floor For SECOND FLOOR

Providing and laying controlled cement concrete M-250 and curing

complete including the cost of form work but excluding the cost of

18.00 446.79 reinforcement for reinforced concrete work in Beams, girders and CUM 6523.00

cantilever up to floor For THIRD FLOOR AND TERRACE FLOOR UP TO

CABIN TOP all floor above floor two level

Providing and laying controlled cement concrete M-250 and curing

complete including the cost of form work but excluding the cost of

reinforcement for reinforced concrete work in COPING/LINTEL FOR

ALL FLOOR ABOVE FLOOR TWO LEVEL

Providing and Laying Controlled Cement Concrete M-250 and curing

etc. Complete including the cost of form work and excluding the cost

of reinforcement etc complete in R.C.C.slabs for all thickness for up to

ABOVE FLOOR TWO LEVEL FOR BASEMENT & GF.

estimated tendered

It No. but maybe item of work Unit Rate(without

Providing and Laying Controlled Cement Concrete M-250 and curing

etc. Complete including the cost of form work and excluding the cost

of reinforcement etc complete in R.C.C.slabs for all thickness for up to

ABOVE FLOOR TWO LEVEL FOR FF

Providing and Laying Controlled Cement Concrete M-250 and curing

etc. Complete including the cost of form work and excluding the cost

of reinforcement etc complete in R.C.C.slabs for all thickness for up to

ABOVE FLOOR TWO LEVEL FOR SF

Providing and Laying Controlled Cement Concrete M-250 and curing

etc. Complete including the cost of form work and excluding the cost

of reinforcement etc complete in R.C.C.slabs for all thickness for up to

ABOVE FLOOR TWO LEVEL FOR TF AND STAIR CABIN TOP FOR ALL.

REINFORCED CEMENT CONCRETE: Providing and laying machine

mixed, machine vibrated, watertight controlled reinforced cement

concrete M-250 grade. Using 20 mm and smaller size machine

crushed black trap metal aggregate (of approved size) and well sieved

silt-free river sand in all types and size of structures as shown in

drawings including water stopper between RCC wall, watering placing

(pouring), necessary scaffolding, hoisting, leaving pockets for pipe

flanges, sockets etc.as directed and keeping drip moulds, grooves,

including curing, testing, haking, as per direction complete. Note: (1)

RATES OF REINFORCED CEMENT CONCRETE WORK SHALL BE

INCLUSIVE OF SHUTTERING, CENTERING BUT EXCLUSIVE OF STEEL

REINFORCEMENT FOR VERTICAL FINN/RCC PADDI.

Providing and laying controlled cement concrete M.250 exposed

work with curing etc. complete including the

cost of formwork but excluding the cost of reinforcement for

R.C.C. work in ELEVATION VARTICAL COLUMN/FINN

Providing and laying controlled cement concrete M-350 and

curing complete including the cost of form work but excluding

the cost of reinforcement for reinforced concrete work in Beams,

girders and cantilever up to for all floor for PT beams.

Providing and executing Unbonded Post Tensioning (PT) system

for RCC PT beams including design & detailing, supply of PE

coated LRPC unbonded strands, anchorages, wedges and

accessories, profiling and fixing of tendons, stressing with

27.00 3071.25 hydraulic jacks, cutting of excess strands, labour, equipment, RMT 168.00

supervision and all complete as per IS 1343:2012, IS 456:2000 &

ACI 318-05 specifications. Complete work for PT beam using M35

concrete and Fe500 steel, measured in Running Meter (R.M.) of PT

cable executed.

estimated tendered

It No. but maybe item of work Unit Rate(without

Providing TMT Bar FE 500 D reinforcement for R.C.C. work including

bending, binding and placing in position complete upto floor two level

Brick work using common burnt clay building bricks having crushing

strength not less than 35 kg./Sq.Cm. in foundation and plinth in

Cement Mortar 1:6 (1-Cement : 6 -fine sand) (B) Conventional for

ground floor (BRICK MASONARY) FOR PLINTH AND GF LEVEL

Brick work using common burnt clay building bricks having crushing

strength not less than 35 kg./Sq.Cm. in foundation and plinth in

Cement Mortar 1:6 (1-Cement : 6 -fine sand) (B) Conventional for

FIRST floor (BRICK MASONARY) FOR F.F LEVEL

Brick work using common burnt clay building bricks having crushing

strength not less than 35 kg./Sq.Cm. in foundation and plinth in

Cement Mortar 1:6 (1-Cement : 6 -fine sand) (B) Conventional for

SECOND floor (BRICK MASONARY) FOR S.F LEVEL

Brick work using common burnt clay building bricks having crushing

strength not less than 35 kg./Sq.Cm. in foundation and plinth in

Cement Mortar 1:6 (1-Cement : 6 -fine sand) (B) Conventional for

THIRD & TERRACE floor U

Half brick masonry in common brunt clay building strength not less

than 35 Kg./Sqcm. In cement mortar 1:3 (1cement : 3 coarse sand)

with 2 Nos. of 6 mm. Diameter mild steel round bars after every three

coarse embedded in cement mortar for all floor up to floor two level

Providing 15mm thick cement plaster in single coat on Rough

(Similar)side of single or half brick walls for interior plastering upto

34.00 7291.88 floor two level and finished even and smooth in (i) Cement mortar 1:3 SQM 224.51

(1-cement:3-sand)finished with trowel including scaffolding curing

etc. comp.For all floor above floor two level ceilings & soffits of stairs

Providing 15mm thick cement plaster in single coat on Rough

(Similar)side of single or half brick walls for interior plastering upto

35.00 9065.44 floor two level and finished even and smooth in (i) Cement mortar 1:3 SQM 198.10

(1- Cement:3- sand) finished with trowel including scaffolding curing

etc. comp.For all floor above floor two level walls

20 mm thick SAND/GUTKA faced cement plaster for OUT SIDE on

36.00 501.63 walls up to height 12 metres above ground level consisting of 8 mm SQM 347.10

thick backing coat of C.M. 1:1 (1-Cement : 1-sand) etc. complete

Providing & laying stone terrazo Wall Texture, with desire color of

37.00 3402.96 finish flakes, including bonding agent, waterproofing compound, SQM 1435.00

adhesives, etc all complete as per instruction of Architect and or EIC.

Providing throating or plaster drip and moulding to R.C.C. Chajja

39.00 2657.60 Prov.20mm deep finished groove etc.comp RMT 27.00

estimated tendered

It No. but maybe item of work Unit Rate(without

Pro. And fixing single layer water proof gypsum board 12.5mm thick

sections using water proof board of size 1220 mm x 1830 mm x

mm suspended by GI suspender channel of size 25 mm x 3 mm with

intermediate channel og size 18mm x 40 mm x 0.8 mm at 1220 mm

center to center ceiling section of size 40 mm x 35 mm x 0.55 mm at

457 mm c/c and perimeter channel A of size 20 mm x 27 mm x 30 mm

x 0.5 mm at edges & drops incl.paper tap sand sofit cleat,anchor

fastener, scoch bolt connecting cleat,joining compound top coat on

ceiling incl.making necy.opening for light fitting,diffuser etc. comp. as

per detail drawing as directed.

Finishing wall with 100% weather proof EXTERIOR paint of approved

make,brand and shade on wall surfaces (two coats), with 100% damp

proof primer one coats , recessed /embossed panels, pillars etc., give

41.00 692.88 an even shade after throughly brushing the surface to remove all the SQM 216.00

dirt and remains of loose powdered material. The material shall be as

described in list of approved material.shade and pattern as design by

architect and directed by EIC.

Providing and laying 18-20mm average thick Granite stone slab

flooring cement mortar1:3 (1cement:3coarsesand) laid over and

42.00 186.60 jointed with grey / white cement slurry with matching color of stone SQM 2497.00

including half round nosing, rubbing and polishing etc. complete.

shade and pattern as directed by Architect/enginner in charge.

Providing and laying 19 to 20mm thick DHOLPUR stone flooring

cement mortar 1:3 (1 cement :3coarse sand) laid over and jointed

with grey / white cement slurry with matching color of stone

including half roundnosing, rubbing and polishing etc complete.

Providing and laying Mirror finished Polished Kota stone slab flooring

laid over and jointed with grey cement slurry including rubbing and

polishing with grove cutting , moulding if required as directed &

approved by Architect and Authority etc complete.(A) 25 mm. Thick

Providing and laying River finished polished kota stone slab 25mm

thick in Trade and risers of steps,skirting Dedo and pillars laid on

45.00 198.00 10mm thick cement mortar 1:3 (1-Cement : 3 coarse sand) and jointed SQM 1124.24

with gray cement slury mixed with pigment to match the shade of

slab including rubbing and polishing etc. complete.

Providing and laying 60 cm x 120 cm Antiskid Vitrified 8 mm thick

tiles flooring over over 20 mm (average) base of cement mortar

1:6(1cement : 6 coarse sand) on new surfrace jointed with colour

46.00 346.78 cement slurry including finishing with flush pointing and cleaning the SQM 1458.33

surface etc complete shade and pattern as approved by Architect and

EIC.Asian,Simpollo,Johanson, Swastik & Rak (Premium First Quality)

estimated tendered

It No. but maybe item of work Unit Rate(without

Providing and laying Ceramic tiles 60 cm * 120 cm 6 mm. Thick in

kitchen,toilet and dado on 10 mm. Thick cement plaster 1:3 (1 cement

47.00 1222.65 : 3 coarse sand) pointing in white cleaned jointed with white cement SQM 1037.89

slurry. size, shade and pattern as approved (matched to flooring) for

all floor WALL as design by architect and directed by EIC

Brick bat waterproofing treatment 100mm average thick in CM 1:3

48.00 2365.00 with smooth surface finish and required slop etc, complete as SQM 554.00

directed by Architect/Engineer

Providing and laying broken coloured chine mosaic flooring/Wall

Cladding for landscape area fountain storage using 12 mm to

mm broken pieces of colourfull glazed tiles to be laid over

49.00 2365.00 cement mortar 1:3 to plain or slope and to be tempered to bring SQM 1508.58

mortar creme out upto surface using white/colour cement/grout

including rounding off junctions and extending them upto

wall,clearing with water and oxalic acid etc. as directed.

WATER PROOF PLASTER: Providing 15 mm thick water proof

cement plaster with first coat of cement mortar 1:4 (1 - cement :

- sand) and over a first coat finishing and floating coat of neat

cement paste mixed with integrated water proofing compound in

proportion mentioned by manufacture including necessary

scaffolding, curing etc. complete for all floors.(NOTE: This plaster is

to be applied in toilet block floors, chhajja tops, underground

water tanks etc.) To be measured in SQ.MTS.

Applying two coats of Birla (white cement based) or Asian (acrylic

lapy- putty) or equivalent & two coats of primer of approved brand

51.00 16357.32 and manufacture on new wall/ceiling surface to give an even shade SQM 40.19

including thoroughly brushing the surface free from mortar dropping

and other foreign matter and sand papered smooth.

Wall painting ( three coats) with plastic emulsion paint of approved

brand and manufacture on undecorated wall surface to give an even

52.00 16357.32 shade including throughly brushing the surface free from mortar SQM 127.11

droppings and other foreign matter and sand papered smooth. on

walls shade and pattern as design by architect and directed by EIC.

LANDSCAPING WORKS

TOP SOIL: Supplying and spreading in position 150mm thk layer of

good approved redsieved soil including levelling, watering,

consolidation by manually or mechanically(which ever convenient at

site) at every 50mm thik layers, cost including of allmaterials, labour

and other charges required to complete and as directed by the

Engineer In charge

Providing, supplying, laying and planting diffrent types of PALM

trees suggested area with necessary garden soil required for

54.00 25.00 trees, curing, requiredmanure, for soil bed etc. complete at all EACH 2505.00

level, between 7 ft to 9 ft heights as design and directed by

Providing, supplying, laying and planting different kinds of plants,

shrubs and lawnsareain suggested area with necessary garden soil

required for plants, curing, requiredmanure, forflower bed etc.

complete at all level, heights as design and directed by ARCHITECT.

estimated tendered

It No. but maybe item of work Unit Rate(without

Providing and fixing pre-cast concrete kerb stone of gray cement

based concrete block 30cm length,45cm height and 15cm thick of

56.00 55.00 M250 grade concret as per approved design and including excavation RMT 264.00

for fixing in proper line and level,filling the joint with C:M 1:3

(1cement:3fine sand) etc complete.

ACOUSTIC CELLING,ACOUSTIC WALL TREATMENT,HP-GFRC PIGMENTED LOUVERS,,FURNITURE WORKS

Providing & fixing ACOUSTIC CELLING CORING with 12.5mm thick

perforated gypsum board false ceiling (NRC 0.60) with acoustic non-

woven fabric backing, suspended from RCC slab using JSW GI section

57.00 300.00 framework and 2mm dia TATA GI wire, fixed with SS screws, including SQM 1506.40

50mm thick glass wool insulation above ceiling, joint finishing, cutting

for services, complete as per specification.Inclusive of material,

labour & all charges.

Providing & fixing WALL ACOUSTIC TREATMENT with acoustic printed

fabric wall paneling with aluminium/PVC gripper system, including

58.00 335.00 8mm thick ply backing, 10mm thick acoustic foam, fixed with Polygrip SQM 4090.00

709 adhesive, fabric properly stretched and finished complete as per

specification.Inclusive of material, labour & all charges.

Auditorium Chair-Seat : Providing and fixing Push back system central

distance (arm to arm) shall be 21"/22"/23" optional as required.

Cushion : Polyurethane (PU) foam density 50+/- 5 kg. Seat hardness :

120 (+30/-20) Newton. Back Hardness : 80 (+30/-20) Newton. Fabric :

Standard fabric as per sample approved. Components/Metal Sheet :

HRC metal sheet as per IS:1079, 1994. All exposed parts shall be spray

painted. Push back Mechanism : Coil spring/spring steel IS:4454,

Grade - 2. Sliding Mechanism : Roller & ball cage arrangement for

59.00 290.00 sliding mechanism without any disturbing noise. Arm Rest : One piece EACH 17500.00

PU arms along with beverage holder.

OEM should have BIFMA Membership (Min 5 Years Old), IGBC

Membership, GRIHA Compliance, TM Registration in Class 20 &

and Green Guard from UL / Green Pro from CII, AIOTA (Office &

Education Furniture Range), ZED Gold. OEM should have ISO

ISO 14001, ISO 45001 & ISO 50001 - issued from NABCB and IAF

accredited agencies only. APPROVED MAKE: HERMAN MILLER, HOF,

STEELCASE, KNOLL

estimated tendered

It No. but maybe item of work Unit Rate(without

Smart classroom Desking -Providing and fixing CURVED LECTURE

TABLE (CLASS ROOM) - Outer arc length 2210 mm & 750 mm height

Top 25mm thick made of PLY with 1mm thick laminate finish with pvc

edge bidding. Modesty 12mm Thick flexi ply with 1mm thick laminate

finish both side with teakwooden edge bidding.Under structure made

of 50x25x1.6mm MS rectanglular pipe with 50x25x1.6mm under top

support powder coated finish. provision for grouting of bench having

60.00 237.01 12mm thick ms plate at base plate should be flushed with flooring, RMT 22600.00

and should not be visible. Provide popup box with module cutout

provision 8 module Soft close & shield pop up box soft close per

seatting. All curved shape tables to be finished with respect to

necessary hardware and wire management system. size of table

should be as per detail design and drawings and layouts. There is

provision of Bag shelf / Pocket for students below electrical trench.

APPROVED MAKE: HERMAN MILLER, HOF, STEELCASE, KNOLL

Faculty Table - Main Table of size 1500mm x 600mm x 750mmht

Side Table of size 900mm x 450mm x 750mm ht

Providing and fixing table unit consist main table, side table, with

pedestal unit with all necessary accessories keyboard, CPU stand

,popup box 8M cutout with vertebrae, modesty panel etc with all

required necessary accessories. All finishes laminate,powder coating

/anodizing shade shall be approved by architect. Table top and Legs :

38mm thk chamfered finish 1mm laminated both side Plywood with

2mm thick matching PVC edge banding as per approved make and

sample by Architect/ Client. Modesty :18mm thk Plywood board with

laminate finish with 2mm thick matching PVC edge banding as per

61.00 19.00 approved make and sample by Architect/ Client Side Unit:Carcase, EACH 75800.00

shutters, drawers are made of 18mm thk Plywood board with

laminate finish with 2mm thick matching PVC edge banding and Back

in 9mm thick ply with laminate finish with finger groove handles as

per approved make and sample by Architect/ Client. All finishes

laminate,powder coating shall be approved by architect. Rate shall

inclusive of mock up sample, all materials, loading, unloading,

transportation, monocoat polish, placing at all floors and for all leads,

all accessories as described in item description. Work complete as per

the detailed drawing , mockup sample and instruction of Architect /

APPROVED MAKE: HERMAN MILLER, HOF, STEELCASE, KNOLL

estimated tendered

It No. but maybe item of work Unit Rate(without

Smart classroom Desking - Providing and fixing CURVED LECTURE

TABLE (CLASS ROOM) - Outer arc length 2210 mm & 750 mm height.

Top 25mm thick made of PLY with 1mm thick laminate finish with pvc

edge bidding. Modesty 12mm Thick flexi ply with 1mm thick laminate

finish both side with teakwooden edge bidding.Under structure made

of 50x25x1.6mm MS rectanglular pipe with 50x25x1.6mm under top

support powder coated finish. provision for grouting of bench having

62.00 44.86 12mm thick ms plate at base plate should be flushed with flooring, SQM 18900.00

and should not be visible. Provide popup box with module cutout

provision 8 module Soft close & shield pop up box soft close per

seatting. All curved shape tables to be finished with respect to

necessary hardware and wire management system. size of table

should be as per detail design and drawings and layouts. There is

provision of Bag shelf / Pocket for students below electrical trench.

APPROVED MAKE: HERMAN MILLER, HOF, STEELCASE, KNOLL

Librarian Cabin Table - Main Table of size 2000mm x 750mm x 750mmht Side Table of

size 1050mm x 450mm x 750mm ht

Pedestal unit - 400 x450x 650 Providing and fixing table unit consist main table, side

table, with pedestal unit with all necessary accessories keyboard, CPU stand ,popup

box 8M cutout with vertebrae, modesty panel etc with all required necessary

accessories. All finishes laminate,powder coating /anodizing shade shall be approved

by architect. Table top and Legs : 38mm thk chamfered finish 1mm laminated both

side Plywood with 2mm thick matching PVC edge banding as per approved make and

sample by Architect/ Client. Modesty :18mm thk Plywood board with laminate finish

with 2mm thick matching PVC edge banding as per approved make and sample by

Architect/ Client. Side Unit:Carcase, shutters, shelfs are made of 18mm thk Plywood

board with laminate finish with 2mm thick matching PVC edge banding and Back in

9mm thick ply with laminate finish with finger groove handles as per approved make

and sample by Architect/ Client. Pedestal: Providing and fixing pedestal unit

comprising two box drawer and one file drawer fitted with telescopic channels of

Hettich / Häfele make or approved equivalent for smooth operation, provided with a

central locking system locking all drawers with a single key and finger groove handles

as per approved design, and mounted on castors for easy mobility. All finishes

laminate, powder coating shall be approved by architect. Rate shall inclusive of mock

up sample, all materials, loading, unloading, transportation, monocoat polish, placing

at all floors and for all leads, all accessories as described in item description. Work

complete as per the detailed drawing , mockup sample and instruction of

Architect/Client.

APPROVED MAKE: HERMAN MILLER, HOF, STEELCASE, KNOLL

estimated tendered

It No. but maybe item of work Unit Rate(without

Teacher Table - Main Table of size 1500mm x 600mm x 750mmht

Providing and fixing table unit consist main table, side table, with

pedestal unit with all necessary accessories keyboard, CPU stand

,popup box 8M cutout with vertebrae, modesty panel etc with all

required necessary accessories. All finishes laminate,powder coating

/anodizing shade shall be approved by architect. Table top and Legs :

38mm thk chamfered finish 1mm laminated both side Plywood with

2mm thick matching PVC edge banding as per approved make and

sample by Architect / Client. Modesty :18mm thk Plywood board with

laminate finish with 2mm thick matching PVC edge banding as per

approved make and sample by Architect / Client. Pedestal Unit:3

drawer unit having Carcase, drawer fascia are made of 18mm thk

Plywood board with laminate finish with 2mm thick matching PVC

edge banding and Back in 9mm thick ply with laminate finish with

finger groove handles as per approved make and sample by Architect/

Client. All finishes laminate,powder coating shall be approved by

architect. Rate shall inclusive of mock up sample, all materials,

loading, unloading, transportation, monocoat polish, placing at all

floors and for all leads, all accessories as described in item

description. Work complete as per the detailed drawing , mockup

sample and instruction of Architect / Client.

APPROVED MAKE: HERMAN MILLER, HOF, STEELCASE, KNOLL

Reception counter Size: 900(D) 1200(H) Providing and curve table

with counter as shown, consist main table, counter, with pedestal

unit with all necessary accessories keyboard, CPU stand ,popup box

8M cutout with vertebrae, modesty panel etc with all required

necessary accessories. All finishes laminate shall be approved by

architect. Table top and Legs : 25mm thk chamfered finish corian

6mm thick as per approved make and sample by Architect/ Client.

Counter front :12mm thk flexi Plywood board with corian finish as

per approved make and sample by Architect/ Client Pedestal:

Providing and fixing pedestal unit comprising two box drawer and one

65.00 7.04 file drawer fitted with telescopic channels of Hettich / Häfele make or RMT 105000.00

approved equivalent for smooth operation, provided with a central

locking system locking all drawers with a single key and finger groove

handles as per approved design, and mounted on castors for easy

mobility. All finishes outside corian and inside laminate shall be

approved by architect. Rate shall inclusive of mock up sample, all

materials, loading, unloading, transportation, monocoat polish,

placing at all floors and for all leads, all accessories as described in

item description. Work complete as per the detailed drawing

mockup sample and instruction of Architect / Client.

APPROVED MAKE: HERMAN MILLER, HOF, STEELCASE, KNOLL

estimated tendered

It No. but maybe item of work Unit Rate(without

Meeting Table 11 pax - Size: 4000(W) X 1200(D) 750(H) Providing

and fixing Table, with all necessary accessories. Providing and fixing

table unit consist main table, side table, with pedestal unit with all

necessary accessories keyboard, CPU stand ,popup box 8M cutout

with vertebrae, modesty panel etc with all required necessary

accessories. All finishes laminate,powder coating /anodizing shade

shall be approved by architect.

Table top and Legs : 38mm thk chamfered finish 1mm laminated both

side Plywood with 2mm thick matching PVC edge banding as per

approved make and sample by Architect/ Client. Modesty :18mm thk

66.00 2.00 Plywood board with laminate finish with 2mm thick matching PVC EACH 126000.00

edge banding as per approved make and sample by Architect/ Client

Raceway :0.8 mm thick CRCA horizontal and vertical raceways with

metal separator.A special flexible rubber component that allows easy

and safe passage of wires All finishes laminate,powder coating shall

be approved by architect. Rate shall inclusive of mock up sample, all

materials, loading, unloading, transportation, monocoat polish,

placing at all floors and for all leads, all accessories as described in

item description. Work complete as per the detailed drawing

mockup sample and instruction of Architect/Client.

APPROVED MAKE: HERMAN MILLER, HOF, STEELCASE, KNOLL

120 Degree Tables Size: 2200(W) X 1150(D) 750(H) Providing and

fixing Table, with all necessary accessories. All finishes

laminate,powder coating shade shall be approved by architect. Table

top : 25mm thk chamfered finish 1mm laminated both side Plywood

with 2mm thick matching PVC edge banding as per approved make

and sample by Architect/ Client. Above table top at centre in sharing

and at edge in non sharing supply of laquered glass screen with

mounting brackets including hardware and fittings. Flip Open:- 2 nos

for each seating of size 250mm Aluminium Powder coated flip open

above the table top and electrical trench below table top to

accommodate electrical and data socket. Wires shall be taken into

the system through cable ducts from the junction boxes and it is

carried upto the table top using wire manager. Raceway :0.8 mm

thick CRCA horizontal and vertical raceways with metal separator.A

special flexible rubber component that allows easy and safe passage

of wires Understructure-Metal powdercoted Taper/Straight leg as

shown with time member with modesty mounting supports All

finishes laminate,powder coating shall be approved by architect. Rate

shall inclusive of mock up sample, all materials, loading, unloading,

transportation, monocoat polish, placing at all floors and for all leads,

all accessories as described in item description. Work complete as per

the detailed drawing , mockup sample and instruction of Architect /

APPROVED MAKE: HERMAN MILLER, HOF, STEELCASE, KNOLL

estimated tendered

It No. but maybe item of work Unit Rate(without

Reading Tables 4 seater Size: 2000(W) X 1200(D) 750(H) Providing

and fixing Table, with all necessary accessories. All finishes

laminate,powder coating shade shall be approved by architect. Table

top : 25mm thk chamfered finish 1mm laminated both side Plywood

with 2mm thick matching PVC edge banding as per approved make

and sample by Architect/ Client. Above table top at centre in sharing

and at edge in non sharing supply of laquered glass screen with

mounting brackets including hardware and fittings. Flip Open:-

250mm Aluminium Powder coated flip open above the table top and

electrical trench below table top to accommodate electrical and data

socket. Wires shall be taken into the system through cable ducts from

68.00 2.00 the junction boxes and it is carried upto the table top using wire EACH 50000.00

manager. Raceway :0.8 mm thick CRCA horizontal and vertical

raceways with metal separator.A special flexible rubber component

that allows easy and safe passage of wires Understructure-Metal

powdercoted Taper/Straight leg as shown with time member with

modesty mounting supports All finishes laminate,powder coating

shall be approved by architect. Rate shall inclusive of mock up

sample, all materials, loading, unloading, transportation, monocoat

polish, placing at all floors and for all leads, all accessories as

described in item description. Work complete as per the detailed

drawing , mockup sample and instruction of Architect/Client.

APPROVED MAKE: HERMAN MILLER, HOF, STEELCASE, KNOLL

Reading Tables 6 seater Size: 3000(W) X 1200(D) 750(H) Providing

and fixing Table, with all necessary accessories. All finishes

laminate,powder coating shade shall be approved by architect. Table

top : 25mm thk chamfered finish 1mm laminated both side Plywood

with 2mm thick matching PVC edge banding as per approved make

and sample by Architect/ Client. Above table top at centre in sharing

and at edge in non sharing supply of laquered glass screen with

mounting brackets including hardware and fittings. Flip Open:-

250mm Aluminium Powder coated flip open above the table top and

electrical trench below table top to accommodate electrical and data

socket. Wires shall be taken into the system through cable ducts from

69.00 5.00 the junction boxes and it is carried upto the table top using wire EACH 70000.00

manager. Raceway :0.8 mm thick CRCA horizontal and vertical

raceways with metal separator.A special flexible rubber component

that allows easy and safe passage of wires Understructure-Metal

powdercoted Taper/Straight leg as shown with time member with

modesty mounting supports All finishes laminate,powder coating

shall be approved by architect. Rate shall inclusive of mock up

sample, all materials, loading, unloading, transportation, monocoat

polish, placing at all floors and for all leads, all accessories as

described in item description. Work complete as per the detailed

drawing , mockup sample and instruction of Architect/Client.

APPROVED MAKE: HERMAN MILLER, HOF, STEELCASE, KNOLL

estimated tendered

It No. but maybe item of work Unit Rate(without

Reading Tables 8 seater Size: 4000(W) X 1200(D) 750(H) Providing

and fixing Table, with all necessary accessories. All finishes

laminate,powder coating shade shall be approved by architect. Table

top : 25mm thk chamfered finish 1mm laminated both side Plywood

with 2mm thick matching PVC edge banding as per approved make

and sample by Architect/ Client. Above table top at centre in sharing

and at edge in non sharing supply of laquered glass screen with

mounting brackets including hardware and fittings. Flip Open:-

250mm Aluminium Powder coated flip open above the table top and

electrical trench below table top to accommodate electrical and data

socket. Wires shall be taken into the system through cable ducts from

70.00 14.00 the junction boxes and it is carried upto the table top using wire EACH 93600.00

manager. Raceway :0.8 mm thick CRCA horizontal and vertical

raceways with metal separator.A special flexible rubber component

that allows easy and safe passage of wires Understructure-Metal

powdercoted Taper/Straight leg as shown with time member with

modesty mounting supports All finishes laminate,powder coating

shall be approved by architect. Rate shall inclusive of mock up

sample, all materials, loading, unloading, transportation, monocoat

polish, placing at all floors and for all leads, all accessories as

described in item description. Work complete as per the detailed

drawing , mockup sample and instruction of Architect/Client.

APPROVED MAKE: HERMAN MILLER, HOF, STEELCASE, KNOLL

Computer table Size: 1000(W) X 600(D) 750(H) Providing and fixing

table unit consist main table, , with CPU storage unit with all

necessary accessories keyboard tray wooden, gromet with cutout

with, modesty panel etc with all required necessary accessories. All

finishes laminate,powder coating /anodizing shade shall be approved

by architect. Table top and Legs : 18mm thk ply with 1mm laminated

both side , panels with 2mm thick matching PVC edge banding as per

approved make and sample by Architect/ Client. Cpu Storage open

type :18mm thk Plywood board with laminate finish with 2mm thick

matching PVC edge banding as per approved make and sample by

Architect/ Client

APPROVED MAKE: HERMAN MILLER, HOF, STEELCASE, KNOLL

estimated tendered

It No. but maybe item of work Unit Rate(without

Library book storage Double Sided - Size: 900(W) X 750(D) 2030(H)

Providing and fixing of Library book storage having 6 shelves,

compartment having sides, back supports to be made of 20 SWG CRC

grade O as per IS 513 powder coated with slots for shelf adjustment.

Each shelf having load bearing capacity of 65 to 75 kg U.D.L per

compartment with bay indicator or lable holder on main units.

Adjustable Shelf Shelf Tray to be made of 0.8 mm thick superior

quality MS CRCA Powder coated to the thickness of 50 microns (+/-

10). Unit having provision for wall mounting also if required with

required assessories. All metal part with chemical treatment of

stages & 7 steps, anti corrosive treatments. 1st degreasing, 2nd

pickling, 3rd phosphating, 4th passivation with rust prebventive

powder coating in standard shades. Powder coating is backed with

180 degree to 200 degree centigrade for shade uniform, hardening &

with scratch resistance. All assessories like indicators, rubber base

stand, book support, shelf bracket included in it. (Main units and

addon units), Stackability The add-on units can be stacked width wise

to form bank of racks having common side panel as per engineer in

APPROVED MAKE: HERMAN MILLER, HOF, STEELCASE, KNOLL

Library book storage Single Sided - Size: 900(W) X 375(D) 2030(H)

Providing and fixing of Library book storage having 6 shelves,

compartment having sides, back supports to be made of 20 SWG CRC

grade O as per IS 513 powder coated with slots for shelf adjustment.

Each shelf having load bearing capacity of 65 to 75 kg U.D.L per

compartment with bay indicator or lable holder on main units.

Adjustable Shelf Shelf Tray to be made of 0.8 mm thick superior

quality MS CRCA Powder coated to the thickness of 50 microns (+/-

10). Unit having provision for wall mounting also if required with

required assessories. All metal part with chemical treatment of

stages & 7 steps, anti corrosive treatments. 1st degreasing, 2nd

pickling, 3rd phosphating, 4th passivation with rust prebventive

powder coating in standard shades. Powder coating is backed with

180 degree to 200 degree centigrade for shade uniform, hardening &

with scratch resistance. All assessories like indicators, rubber base

stand, book support, shelf bracket included in it. (Main units and

addon units), Stackability The add-on units can be stacked width wise

to form bank of racks having common side panel as per engineer in

APPROVED MAKE: HERMAN MILLER, HOF, STEELCASE, KNOLL

estimated tendered

It No. but maybe item of work Unit Rate(without

Head Chair-Providing And Supply High Back Rev. Upholstered With

Leatherette Seat Made Up Of 12mm +/- 1mm Thick Hot Pressed Mr

Grad Plywood. Back Is Made Up Of With Mesh Upholstery In Injection

Moulded Frames With Adjustable Lumber Support And Adjustable

Headrest. Moulded Polyurethane Foam Used In Making Seat With

Moulded Density 45+/- 2 Kg/M³. Spine Bracket Should Be Made Of

M.S Plate 8mm Thickness Connecting Back With Mechanism. Armrest

Top Is Soft Touch Polyurethane Moulded Of 250 To 300 Density Insert

In Chrome Finish Pipe Having Unique Fix "T" Shape. The Mechanism

Of The Chair Have Following Features : 360⁰ Revolving Type 3.5Mm

Thick Crca Seat Plate With 4Mm Thick Crca Channel Plate Synchro

Mechanism, Tilt Tension Adjustable, Single Position Locking, Plastic

74.00 3.00 Component Inside The Mechanism Of Grade - Mi 3530 And Epoxy EACH 25000.00

Powder Coated 70 Microns With Tested 1.2 Lacs Cycles As Per Bifma

Standard The Chair Will Be Provided With Pneumatic Height

Adjustment Which Have Have Stroke Of 100 +/- 5mm. The Five Leg

Base Is Made Up Of 38mm Dia X 1.2Mm Thick Tubular With 3.15mm

Thick Centre Hub Crc Fabricated Chrome Finish. It Have Be Fitted With

50mm Dia Twin Wheel Castor. The Size Of The Base Have Be - 660 +/-

1mm Pitch-Centre-Diameter. Load Test As Per Bifma Compliance. The

Twin Wheel Castors Made Of Nylon Injection Moulded In Black

Colour. Overall Dimensions Of Chair Have Be, Head Rest-320 W X

Hmm,Back- Ht 700 X 450 W.Mm, Seat-480 D X 500 Wmm, Over All

Height 1260Mm, Lower Ht-1160mm.

APPROVED MAKE: HERMAN MILLER, HOF, STEELCASE, KNOLL

estimated tendered

It No. but maybe item of work Unit Rate(without

Staff/Meeting room Chair-Providing And Supply High Back Rev.

Upholstered With Leatherette Seat Made Up Of 12mm +/- 1mm Thick

Hot Pressed Mr Grad Plywood. Back Is Made Up Of With Mesh

Upholstery In Injection Moulded Frames With Adjustable Lumber

Support And Adjustable Headrest. Moulded Polyurethane Foam Used

In Making Seat With Moulded Density 45+/- 2 Kg/M³. Spine Bracket

Should Be Made Of M.S Plate 8mm Thickness Connecting Back With

Mechanism. Armrest Top Is Soft Touch Polyurethane Moulded Of

To 300 Density Insert In Chrome Finish Pipe Having Unique Fix "T"

Shape. The Mechanism Of The Chair Have Following Features : 360⁰

Revolving Type 3.5Mm Thick Crca Seat Plate With 4Mm Thick Crca

Channel Plate Synchro Mechanism, Tilt Tension Adjustable, Single

Position Locking, Plastic Component Inside The Mechanism Of Grade -

Mi 3530 And Epoxy Powder Coated 70 Microns With Tested 1.2 Lacs

Cycles As Per Bifma Standard The Chair Will Be Provided With

Pneumatic Height Adjustment Which Have Have Stroke Of 100 +/-

5mm. The Five Leg Base Is Made Up Of 38mm Dia X 1.2Mm Thick

Tubular With 3.15mm Thick Centre Hub Crc Fabricated Chrome

Finish. It Have Be Fitted With 50mm Dia Twin Wheel Castor. The Size

Of The Base Have Be - 660 +/- 1mm Pitch-Centre-Diameter. Load Test

As Per Bifma Compliance. The Twin Wheel Castors Made Of Nylon

Injection Moulded In Black Colour. Back- Ht 700 X 450 W.Mm,Seat-

480 D X 500 Wmm,Over All - High Ht-1080Mm,Lower Ht-980Mm, Gas

Pump + Tele Balow 100Mm, Five Pronge Crome Base With Twin

APPROVED MAKE: HERMAN MILLER, HOF, STEELCASE, KNOLL

Sofa curve and straight-Providing and supply Sofa sturcture made

from 18mm MR Grade Mr grad plywood supported with Maranti Solid

wood, back side and curved part Covered with 3mm flexi ply, sofa

arm made from 12mm thick MR Grade Mr grad plywood supported

with maranti solid wood. Elastic Belt, 75mm board & 2.25 mm thick

elastic webbing stapling in seat frame at 100 mm centre to centre

distance, belt fastern in X and Y axies of seat, elastic belt elongation

45% tensile strength 350 kg. Foam 100 mm X 40 density Premium

Quality foam covered with 25mm X 32 density super soft Premium

Quality Foam for soft touch filling in seat. 50 mm X 40 density

Premium Quality foam covered with 25mm X 32 density super soft

Premium Quality foam for soft touch filling in back. Stiching Stiching

work done with well known german brand (Aman / Gutermann)

Thread. Nylone & Polyster thread used as per application. Wooden

Frame and Legs applied with polishing.

APPROVED MAKE: HERMAN MILLER, HOF, STEELCASE, KNOLL

estimated tendered

It No. but maybe item of work Unit Rate(without

Smart Classroom Chair-Providing and supply chair Without writing

Pad, frame structure made of 25mm thick CRCA MS round pipe with

epoxy powder coated to the thickness of 50 microns,Polypropylene

armrest and back frame with nylon mesh/cushion back, seat have be

77.00 276.00 made up of 12 MM +/- 1 MM thick hot pressed Mr grad plywood on EACH 16500.00

which moulded PU foam mounted covers with fabric/rexin. Powder

coated black metal base with 50mm twin wheel castors. size:-

APPROVED MAKE: HERMAN MILLER, HOF, STEELCASE, KNOLL

Reading Chair- Providing and supply The chair pipe structure of MS

CRCA finish 16 gauge round pipe having a diameter of 32 mm, the

understructure frame tubular structure with stability for proper

balance, the seat and back is supported on spring structure, the

backrest armrest and seat dimensioned and curved from an

ergonomics point of view, the frame and spring-seat structure

prepared from MIG welding process & powder coated, proper high-

density rubber bush provided at all four legs, seat & back upholstered

APPROVED MAKE: HERMAN MILLER, HOF, STEELCASE, KNOLL

Providing & fixing WOODEN STAGE FLOORING of approved quality

over suitable framework, machine finished and polished, suitable for

auditorium, theatre and event use, complete as per

specification.Inclusive of material, labour & all charges.

Providing & fixing HP-GFRC pigmented louvers of approved colour,

approx. 3.0m height × 300mm width × 60mm thickness, fixed with

suitable supporting framework and anchor fasteners, complete as per

specification.Inclusive of material, fixing & all charges.

PLUMBING DRINAGE WORKS

Providing and fixing S.W. gully trap with C.I. grating brick masonry

81.00 5.00 chamber and water tight C.I.Cover with frame of 300 mm x 300 mm EACH 1279.40

size (inside) with standard weight. 100 m x 100 m.size P.Type.

Constructing brick masonry chamber for underground C.I. Inspection

chamber and bends with bricks having crushing strength not less than

35 kg. Cm² in C.M. 1:5 C.I. cover with frame (Light duty) 455 mm x

mm internal dimensions, total weight of cover with frame to be not

less than 38 kg.(Wt. of cover 23 Kg.) and (Wt. of frame 15 Kg.) R.C.C.

82.00 5.00 top slab with 1:2:4 mix (1-cement :2-coarse sand : 4- graded stone EACH 2903.89

aggregate 20 mm size) foundation concrete 1 :5 :10 inside plaster

mm thick with cement mortar 1 :3 finished smooth with a floating

coat of neat cement on walls and bed concrete etc.complete.

(A) Inside dimensions 500 mm x 700 mm and 450 mm deep for pipe

line with one or two inlets.

estimated tendered

It No. but maybe item of work Unit Rate(without

Providing and constructing Sewer manholes, scraper manholes and

unit house connection chamber, as per the type design in brick

masonary in C. M. 1:3 ,inside and outside lastering in C. M. 1:3

necessary coping in R.C.C.M. 200 fixing C. I. steps and fixing manhole

frame and covers (But excluding supply of manhole frame and covers)

over manholes and house connection chambers and fixing Manhole

83.00 1.00 covers (but excluding supplying of manhole covers) over scraper EACH 12179.00

manhole etc. complete, providing and fixing safety chain wherever

necessary as per the stipulations in the type desing complete (excl.

excavation). Manhole type "A" circular type having inside diameter of

minimum 1200 mm and for depth from 0 M to 1.50 M (for 150 mm to

500 mm dia sewers). Manhole type "A" as above but up to 1.0 M

DOOR WINDOW ALLUMINIUM SECTION,GLASS, WALL/PARTITION WORK

Providing and fixing 35 mm thick shutters for Doors, windows and

clerestory windows including Indian teak wood frames

84.00 197.21 cm x 7 cm. size including anodized alluminium fixtures and SQM 5285.45

fastenings including primer coat of approved quality and two

coats of oil painting etc, complete. (ii) Fully Panelled.

Providing and fixing 35 mm thick shutters for Doors, windows

and clerestory windows including Indian teak wood frames

85.00 7.13 cm x 7 cm. size including black enamelled iron oxidixed SQM 4595.06

fixtures and fastenings including primer coat of approved quality

and two coats of oil painting etc, complete. (i) Fully Glazed.

Appliying priming coat over new wood and wood based surface

after and including preparing the surface by throughly cleaning

86.00 510.84 oil, grease, dirt and other foreign matter, sand papering and SQM 44.20

knotting. (B) Ready mixed

paint brushing wood primier pink.

Painting two coats (excluding priming coat) on new wood and

wood based surface with enamel paint, interior to give an even

87.00 510.84 shade including cleaning the surface of all dirt, dust and other SQM 95.00

foreign matter sand papering and

estimated tendered

It No. but maybe item of work Unit Rate(without

Providing and fixing factory fabricated aluminium glazed wall

using aluminium extruded sections of grade AA6063 T6, minimum

required thickness (1.6 mm to 2.0 mm), finished with minimum

60–80 micron powder coating / 12 micron anodizing, including

mullions, transoms, cleats, brackets, screws, anchor fasteners,

EPDM gaskets, setting blocks, and approved hardware. Supplying

and fixing Double Glazed Unit (DGU) glass consisting of 6 mm

clear toughened glass + 12 mm air gap with aluminium spacer

88.00 1505.74 filled with desiccant + 6 mm clear toughened glass (6+12+6 mm), SQM 8500.00

sealed with primary butyl and secondary silicone sealant,

complete with structural silicone, weather sealant, making the

system air-tight and water-tight. The work includes door opening

as per drawing & detail given with all cutting, fabrication,

assembling, hoisting, installation in true line and level, sealing of

joints, scaffolding, curing, cleaning, and etc all materials, labour,

T&P, transport, complete as per approved drawing and direction

of Engineer-in-Charge.

Providing and fixing factory fabricated aluminium glazed wall

using aluminium extruded sections of grade AA6063 T6, minimum

required thickness (1.6 mm to 2.0 mm), finished with minimum

60–80 micron powder coating / 12 micron anodizing, including

mullions, transoms, cleats, brackets, screws, anchor fasteners,

EPDM gaskets, setting blocks, and approved hardware. Supplying

and fixing laminated toughened safety glass consisting of 6 mm

clear toughened glass + 1.52 mm PVB interlayer + 6 mm clear

89.00 47.25 toughened glass (6+1.52+6 mm laminated glass), factory SQM 6950.00

laminated under heat and pressure, complete with approved

structural silicone, weather sealant, making the system air-tight

and water-tight. The work includes opening as per drawing &

detail given with all cutting, fabrication, assembling, hoisting,

installation in true line and level, sealing of joints, scaffolding,

curing, cleaning, and etc. all materials, labour, T&P, transport,

complete as per approved drawing and direction of Engineer-in-

EXTERIOR SIGNAGE LETTER:- Providing and fixing acrylic name

plate made of high-quality cast acrylic sheet of minimum 5–8 mm

thickness, clear/colored as approved, duly UV printed / laser

engraved / vinyl pasted with name, designation, logo, and

approved matter. Fixed with stainless steel/brass stand-off fittings,

screws, and accessories on wall/door, including inside led light

fiting with all materials, labour, cutting, polishing, finishing, and

installation, complete as directed by Engineer-in-Charge

Providing and fixing standared extruded of alluminium section of

size 63.50 x 38.10 x 1.95 mm,@ Wt 1.094Kg / Rmt with colour

anodized alluminium frame as details etc complete for Fix

window/gap/elevation.all fitting material & labour including fixing

as per detail given and as directed by architect/engineer in

FEBRICATION & PAINT WORKS

estimated tendered

It No. but maybe item of work Unit Rate(without

Providing,Making, Fabricating, Eracting with Fixing M.S.

Fabricated Structure as per design, , m.s flat , M.S.box pipe, M.S.

round dia pipe M.S.Hollow Pipe top cover as per design

(square/round), M.S. polished square and round shape as per

92.00 7449.00 design,MS angle & GI Concertina coil wire for fencing, M.S kg 144.00

Polished flat with making required size hole at required spacing

as design by architect and directed by EIC.and hold fast with

coach bolts & required fitting including all as per drawing etc.

complete.as design by architect and directed by ARCHITECT.

Applying priming coat over new steel and other metal surfaces

after and including preparing the surface by thoroughly cleaning,

93.00 1836.43 oil grease, dirt and other foreign matter and scoured with brushes SQM 37.25

fine steel wool, scrapers, and sand paper with ready mixed

priming paint brushing red lead.

Painting two coats (excluding priming coat) on new steel

and other metal surfaces with enamel paint, brushing interior

to give an even shade including cleaning the surface of all

dirt, dust and other foreign matter.

PLUMBING & SANITATION WORKS

Providing and fixing C.P.V.C. water supply pipes schedule 80 pipes

confirming to ASTM F-441 for hot as well as cold water supply with

necessary fitting like Tee, Elbows, Union, coupler, etc. in walls as well

95.00 200.00 as floors concealed in walls and finishing the wall with cement mortar RMT 168.67

to give each finish of brands like Astrl or Finolex. Complete with

necessary scaffolding at all levels.

(A) 15 mm Ø C.P.V.C. pipes.

96.00 200.00 -Do- (B) 25 mm Ø C.P.V.C. pipes. RMT 251.31

97.00 100.00 -Do- (C) 32 mm Ø C.P.V.C. pipes. RMT 334.89

98.00 150.00 -Do- (D) 40 mm Ø C.P.V.C. pipes. RMT 443.29

Providing and fixing concealed center point to wall ceiling & floor

CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF)

99.00 200.00 seal for potable water of following dia. nominal bore tube fittings RMT 654.04

and clamps including making good the wall, ceiling and floor

etc.complete. [F] 50mm.

Providing and fixing in position C.P.V.C. Ball valve confirming to ASTM

F-441 to water supply line. (A) 25mm Ø C.P.V.C. Ball valve.

101.00 5.00 -Do- (B) 32 mm Ø C.P.V.C. Ball valve. EACH 539.00

102.00 5.00 -Do- (C) 40 mm Ø C.P.V.C. Ball valve. EACH 597.00

Providing laying and jointing in true line and level 110 mm dia.

U.P.V.C. Pipe (SCH- 40) for cold water including fittings make PRINCE

/ SUPREME / ASTRAL / FINOLEX or equivalent as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of

clamp at every two metre C/C or shall be concelled as directed

including necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost of all

estimated tendered

It No. but maybe item of work Unit Rate(without

Providing and laying to level and slope` under ground

104.00 50.00 drainage/sewerage U.P.V.C. 'Foam Core' pipes with 3 layer outer and RMT 390.00

inner solid P.V.C. (A) 110 mm Ø 3.2 mm thick.

Providing and laying to level and slope` under ground

105.00 50.00 drainage/sewerage U.P.V.C. 'Foam Core' pipes with 3 layer outer and RMT 579.00

inner solid P.V.C. (B) 160 mm Ø 4.7 mm thick.

Providing and laying to level and slope` under ground

106.00 10.00 drainage/sewerage U.P.V.C. 'Foam Core' pipes with 3 layer outer and RMT 730.00

inner solid P.V.C. (C) 200 mm Ø 4.7 mm thick.

PProviding and fixing washbasin with single hole for pillartap with C.I.

or M.S. brackets painted white includingsutting holes and making

107.00 24.00 good the same but Including fittings.(A) Vitreous China:(ii) Flat Back EACH 1505.90

mm x v 400mm size. (i) In white colour

Providing and fixing C.P. Pillar/Angle cock 15 mm Heavy duty swan

neck with flange and wall flange of make like Jaguar, ESS ESS, Cera (to

be provided for water tubes/connectin pipe including ) C.P.

Pillar/Angle cock 15 mm Heavy duty swan neck

Providing and fixing Urinal of approved quality including

connection with trap and with integral longitudinal flush pipe

109.00 23.00 complete set (unit) including connecting the whole unit with EACH 1654.19

water supply and drainage.(in nos.) .(A) Squating plate pattern

white earthenware 550mm x 300mm.

Providing and fixing wash down water closet (European type, W.C.

Pan) with integral P or S trap including jointing the trap with soil pipe

in Cement Mortar 1:1 (1-Cement : 1- fine sand) (A) vitreous China

Pattern :(i) in white colour (all C.P. fitting of approved brand like

Jaguar, ESS ESS or Cera) complete set (unit) including connecting the

whole unit with water supply and drainage.(in nos.)

Providing and fixing chromium plated brass half trun flushcock of

111.00 35.00 approved quality including fixing in pipe line etc.complete.(ii) 25mm EACH 261.16

Providing and fixing Jet spray heavy duty with S.S. Braided hose

112.00 35.00 cm long with brass screw down stop tap.(A) 15mm EACH 509.72

Providing and fixing self closing press matic bib cock with flange and

113.00 50.00 wall flange of make like Jaguar, ESS ESS, Cera (to be provided for EACH 1584.00

water tubes in no.)

estimated tendered

It No. but maybe item of work Unit Rate(without

OVER HEAD PVC WATER TANK : Supplying, lifting and installing in

position, PVC water tank 'EURO' or equivalent having cross section of

tank wall having outer coloured layer, U.V resistant layer, insulating

114.00 25000.00 layer and anti bacterial inner layer. Cost including transporting, Ltr 3.91

labour and making necessary connection for inlet, outlet, linkage,

overflow, wash-out, etc.with required platform etc. as directed by

engineer in charge.

Providing and fixing PVC SWR Nahni trap IS 14735 for

drain - 100 mm diameter with SS jali of the following nominal

115.00 55.00 diameter of self cleansing design with C.I scread down or EACH 645.09

hinged grating including the cost of cutting and making

Applying Anti corrosve Chemical treatment Food Grade epoxy for

water retaining structure including cleaning the surface thoroughly &

making surface dry. Even & smooth for applying treatment and

coats.DCL1400 with 3 years Guarantee.

Providing and applying a protective and waterproofing coating of

approved quality [Bituminous Paint/Bitumen Emulsion/Bituminous

Mastic] conforming to IS: 158 (or relevant IS code) on the external

surface of the Reinforced Cement Concrete (RCC) water tank,

including all necessary surface preparation, cleaning, and application

of two or more coats as specified by the engineer-in-charge, complete

118.00 16.00 JCB machine rental work at the site of excavation or cleaning hour 1400.00

FIRE FIGHTING WORKS

Supply, Installation, Testing and Commissioning of Electric

driven fire pump suitable for automatic/manual operation and

consisting of following: complete in all respect as required.

a) Monoblock pump & DIESEL PUMP SET to ensure a

minimum pressure of 3.5 kg / sq.cm. at highest and farthest

outlet at specified flow of 1620 Lpm at 60 m. head

conforming to IS standards B) 180 LPM JOKEY

PUMP (3 NO PUMP TOTAL)MAKE-AQUATEX/LUBI

Supplying, Installation, Testing and Commissioning of Control

Panel suitable for automatic/manual operation of fire fighting

pumps consisting

(a) Necessary cabling, wiring, earthing from panel to individual

120.00 1.00 equipment shall be included in the quoted price. Set 45000.00

(b) Facility for more selections i.e auto or manual.

(c) Protection failure and control cabling.

(d) interlocking of pressure switch with pumps

(e) soft starterMAKE-L&T

estimated tendered

It No. but maybe item of work Unit Rate(without

Supply, Installation, Testing and Commissioning of 150 mm dia

Pressure Gauge of range 0 - 16 Kg / cm² conforming to IS -

having bourdon tube of stainless steel 310 in cast aluminium, stove

enameled, black, weather proof case with outer, screwed aluminium

bezel and complete with necessary U-type stainless steel siphon tube

and cock including providing suitably painted angle iron support

to the tube etc.as per specification

complete as required.MAKE-H.GURU

Supply, Installation, Testing and Commissioning of the following sizes

of flange jointed / screwed / welded, G I Pipes of Class C (Hevy class)

ISI marked including accessories such as MS bracket, U clamps with

Anchor fasteners, tees / elbows / reducers / couplings / unions /

122.00 210.00 bends / flanges/core cutting etc., and laying on the surface including Rmt. 2150.00

painting with one coats of anticorrosive primer and one coats of

approved red enamel paint after laying and testing after Installation

etc. as per specifications complete as required. a) 150 mm dia.MAKE-

ASIAN/JINDAL/SURYA

Supply, installation, testing and commissioning of C.I. Butterfly

valve (PN 1.6) with

flanges, nut bolts, gaskets complete as required.(A ) 100 mm dia MAKE-

Supply, Installation, Testing and Commissioning of NON RETURN

129.00 4.00 VALVE. NRV Nos. 4200.00

Supply, installation, testing and commissioning Single Headed Fire

Hydrant Valve with 80 mm N.B. flanged inlet, 63 mm dia female

instantaneous outlet type. S.S. coupling, blank cap, chain, twist

130.00 18.00 release type lug & all accessories Conforming to IS:5290. Including Nos. 4500.00

fixing with supports, flanged tapping from wet riser, orifice plate

complete as required

by the Local Fire Authority.MAKE- ALEX/SAFEP/PROTECTO

Supply, Installation, Testing and Commissioning of Weather proof

Standard MS Fire Hose Cabinet wall mounting type (450 mm x

131.00 18.00 mm x 250 mm deep) having single opening with necessary locking Nos. 1500.00

arrangement by allan key suitable for housing 1 no. hose pipe,

1no. Branch pipe & nozzle spanner. MAKE- ALEX/SAFEP/PROTECTO

Supply, installation, testing and commissioning non-percolating

rubber reinforced lined fire Hose pipe (as per IS : 636) of 63 mm dia

and 15 mtrs long. The hose shall be rated for burst pressure of

132.00 18.00 Kg/sqcm. Hose shall be complete with ISI marked SS male & Nos. 4100.00

female coupling (IS:903) bound & riveted to hose pipe with SS rivets

& 1.5 mm SS wire.MAKE- ALEX/SAFEP/PROTECTO

( RATE 1 NOS HOSE PIPE)

estimated tendered

It No. but maybe item of work Unit Rate(without

Supply, Installation, Testing and commissioning of 63 mm dia

instantaneous pattern COM SS short branch pipe, 20 mm dia

133.00 18.00 nozzle conforming to IS 903, suitable for inter connection to Nos. 1200.00

hose pipe coupling complete as required by the Local Fire

Authority..MAKE- ALEX/SAFEP/PROTECTO

Supply, installation, testing and commissioning of First Aid Hose Reel

equipment conforming to IS:884 comprising of hose reel drum, 8 mm

shut off nozzle, Rubber hose reel tubing as per IS: 444 of 25 mm dia x

30 mtr. long, painting, Manual fix type with fixing bracket, anchor

fastener, bolts & nuts etc. complete as required by Local Fire

Authority.MAKE- ALEX/SAFEP/PROTECTO

Supply, installation, testing and commissioning of SS Ball Valve.

a) 25mm dia.MAKE- ALEX/SAFEP/PROTECTO

Supply, installation, testing and commissioning of Cast lron Two Way

Fire Brigade Inlet as per IS: 904 having 63 mm dia inlet with blank cap

and chain with necessary fittings,

flanges, nut bolts etc. complete as required. .MAKE- ALEX/SAFEP

Supply, Installation, Testing and Commissioning of Gun Metal Air

137.00 2.00 Release Valve with Nos. 1400.00

necessary fittings. Size: 25 mm (For Riser) .MAKE- SANT

Supply, Installation, Testing and commissioning of a) Pendent

Sprinkler 57°C standard response (K-80)

Supply, installation, testing and commissioning of PRESSURE

139.00 3.00 switches to each internal Nos. 3200.00

hydrant valve with required accessories. .MAKE- ISI

Supply, installation, testing and commissioning of XLPE insulated

copper Cable from each switches to Panel with all necessary

Providing and fixing of Manual Fire Alarm system as per

141.00 12.00 requirement and specification consisting of following items Nos. 800.00

a) Manual call point (FR-Polymer)MAKE- ASES/AGNI

142.00 12.00 b) Hooters (FR-Polymer)MAKE- AGNI Nos. 800.00

c) Cable & other accessories: C XLPE insulated copper MAKE-

144.00 1.00 d) Manual Fire Alarm Panel 8 ZONE MAKE-ASES/AGNI Nos. 6500.00

Supply, installation, testing and commissioning of Carbon Dioxide

(Co2) type Fire Extinguisher of 4.5 kg confirm to IS:15683, with ISI

145.00 12.00 marked / TAC approved fitted with Nos. 5100.00

required accessories including wall suspension brackets. MAKE-

Supply, installation, testing and commissioning of ABC type 6 kg

confirm to IS:15683,

with ISI marked / TAC approved fitted with required accessories

including wall suspension brackets.MAKE- ISI

147.00 1.00 FSPA AND NOC CHARGE MAKE- ISI Nos. 35000.00

148.00 135.00 SMOKE DETECTOR MAKE- ISI Nos. 1150.00

Providing and fixing chicken wiremesh jali at R.C.C. masonry joints at

any height with all labour & material etc. complete.

estimated tendered

It No. but maybe item of work Unit Rate(without

"Supplying, Erecting, Testing & Commissioning the passenger lift

having following main features: 4/5/6 Passengers,Basement + Ground

plus 3 upper floor with Rated Speed of 1.0 m/sec, (A) With General

Specification attached herewith. Cat.II NOTE: Before Quoting Rate for

this Item of Lift, beader shall check Describption, specifications and

instructions pertaining to this Item of LIFT in Special Terms &

Conditions." incl. 5 year maintenance contract and approved make

like omega, techno and trio or equivalent as per vendor list."

151.00 1.00 Water conection with necessary fitting JOB 2000.00

152.00 1.00 Drainage conection with necessary fitting JOB 2000.00

153.00 2.00 Takti for Inauguration with naming as directed by architect or EIC. Nos. 6491.00

ELECTRIC WORKS ITEMS

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire

of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade

FRLS PVC insulated multi strand copper wires up to 10 mtr

length , in below type of pipe erected with 6A Modular type

switch / bell push & accessories and earth continuity of

following type, erected on PVC / Metallic/Wooden box, single

mounting base frame covered with textured/metallic/white

front plate modules erected on / in wall / ceiling as per pipe

erected, with necessary Lamp holder/ceiling rose /

H.D.Connector as directed.(f) with medium class Rigid PVC

pipe and accessories erected concealed in wall/ceiling

complete. Cat III

Point wiring for FAN with 2-1.5 sq.mm & earth wire of

sq.mm (Green) both are of .ISI marked 1.1 KV Grade FRLS

PVC insulated multi strand copper wires up to 10 mtr length,

in below type of pipe erected with 6A Modular type switch

and hum free EME step type electronic fan regulator

mounted and accessories with earth continuity of following

type erected on PVC / Metallic/Wooden box, single mounting

base frame covered with textured/metallic/white front plate

modules erected on / in wall / ceiling as per pipe erected.

with necessary ceiling rose / H.D.Connector as directed.(f)

with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete.Cat III

estimated tendered

It No. but maybe item of work Unit Rate(without

Point wiring for Individual Plug with & earth wire of

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS

PVC insulated multi strand copper wires up to 10 mtr length,

in below type of pipe erected complete with Modular type

switch & 5 pin Plug erected on PVC / Metallic/Wooden box

156 70.00 covered with appropriate front plate modules erected on / in Pt. 815.00

wall / ceiling as per pipe erected with following type of

accessories.[II] For 16A Plug and 16 amp switch with 2-2.5

sq.mm Cu. Wire from mcb db board.(f) with medium class

Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete Cat III.

Point wiring for on board Looped Plug with 6A Modular type

switch & 5 pin socket erected on PVC / Metallic/Wooden box,

157 125.00 single mounting base frame covered with textured / Pt. 281.00

metallic/white front plate modules erected on / in wall /

ceiling with following type accessories. Cat III.

Providing following type of Modular Type Accessories

mounted with PVC / metallic/Wooden box, single mounting

base frame covered with textured / metallic/white front plate

158 80.00 modules erected with necessary connections as per site Each 344.00

situation directed by Engineer In charge(13)

6A/10A/16A/20A/25A/32A Single pole Modular MCB Switch.

(14) 6A/ 10A/ 16A/ 20A/ 25A/ 32A Double Pole Modular MCB

Providing & laying approved make ISI marked HDPE 6Kg / cm2

(Class-3) as per IS:4984:1995 PE-80 to be erected at road

crossing on or floor as directed for laying of cable. The pipes as

following size of dia & weight per 6 mtr.(b) 50 mm inner dia

Supplying and erecting Flexible PVC insulated multi strand multi

161 325 core 1.1 kv grade ISI marked copper wires of following size to be Rmt 196.00

erected as directed.(k) 4.00Sq.mm 4 core round PVC sheathed

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable

multistrand / Solid Aluminium conductor for 1.1 KV. to be laid on

wall with necessary clamps or in existing trench / pipe of

following size of cables(C) 4 core 10 Sq. mm

Providing and erecting Mains with 1.1 KV grade FRLS PVC

insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected concealed in /flushed on

163 1650.00 wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC Rmt 68.00

insulated stranded wire of green colour for earth continuity

of following size (A) With medium class Rigid PVC pipe and

accessories(a) 2 wire 1.5 sq. mm

estimated tendered

It No. but maybe item of work Unit Rate(without

Providing and erecting Mains with 1.1 KV grade FRLS PVC

insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected concealed in /flushed on

164 850.00 wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC Rmt 90.00

insulated stranded wire of green colour for earth continuity

of following size(A) With medium class Rigid PVC pipe and

accessories(b) 2 wire 2.5 sq. mm

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded

Copper conductor wire in following type of pipe to be erected in

/ on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC

insulated stranded wire of green colour for earth continuity of

following size (a) with medium class Rigid PVC pipe and

accessories(a) 2 wire 4 sq. mm

supplying and erecting sheet steel powdercoated cable and

termination box to be mounted on top or bottom of the

166 10 m.b.b.distribution box for housin/ covering extra wires and cables each 930.00

suitable for followingsize of m.c.b. db box. Three phase double

12way double door.

S.I.T.C. submersible pump set suitable for bore of 100 mm. dia. or

more having three phase motor capacity not more than 5 H.P.

167 1.00 with following capacity . Lifting and Lowering taken extra. (A) (25 each 40310.00

stage) 120 to 125 LPM discharge at 155 to 120 mtrs. head

respectively suitable for 50 mm dia. delivery pipe

Supplying and erecting Direct on line starter with 30 Amp.

(resistive @ 230v) power relay and with 2 to 5/ 4 to 10 / 8 to

amp. Range C.T. Operated electronic overload relay in

engineering grade plastic enclosure for 3 ph 415v 50 HZ A.C.

motor up to 7.5 HP with high voltage protection (above 480 v)

and under voltage protection (below 330 v) current sensing single

phasing protection. Reverse phasing protection, inverse current

characteristic overload protection with indication for On, OL,

HV,LV SPP in a single unit with feather touch start / stop push

button, high temperature with standing Bakelite terminals

complete erected on P.W. Block with necessary connection.

Supplying & erecting in earthpit of minimum bore dia. 225mm size

ASH or approved make Safe Earthing Electrode consisting Pipe-in-

Pipe Technology as per IS 3043-1987 made of corrosion free

G.I.Pipes having Outer pipe dia of 80 mm having 80-200 Micron

galvanising, Inner pipe dia of 40 mm having 200-250 Micron

galvanising, connection terminal dia of 14 mm with constant

169 2.00 ohmic value surrounded by highly conductive compound with each 12375.00

high charge dissipation suitable for panel earthing.[A] For

electrical installation up to 440 V (c) For Electrical Installation

covering Transformer Neutrals, Lightning arrester Earthing,

A.C.Plant & Sensitive Computer System(like Automation, SCADA)

i.e independent Earthing in normal soil. Length of Pipe : 2.00 mtrs

Back filling Compound :2 nos Bags of 25 Kg.

Providing one bag of 25 Kg. Additional Back Filling Compound

(BFC) suitable for safe earthing device.

Providing and erecting Pipe type earthing having 150 cms.long

and 2.5 cms. dia. galvanised iron pipe with coupling and buch

buried in specially prepared earth pit complete with necessary

SWG earth wire.

estimated tendered

It No. but maybe item of work Unit Rate(without

providing and erecting Approved make ELCBs / RCCBs

conforming to IS: 12640 and having sensitivity of 30 mA and Short

Circuit withstand capacity of 10 KA and suitable for operation on

172 10.00 3 phase and neutral 415V,50Hz. having characteristic of quick each 3080.00

action & tripping with all advance feature & do not incorporate

any electronic component for following Max. rating erected as

directed. (ii) 40Amps. FP Cat. III

providing and erecting Mains with ISI marked electrolyte

stranded copper conductor, Non PVC Zero Halogen free fire

retardant insulated copper conductor, insulated wire (HRFR)

conforms to IS-694, erected in existing pipe with 1.5sq. mm

copper conductor of same specifications for earth continuity of

following size. (a) 3 core 1.5 Sq. mm

providing and erecting Approved make ELCBs / RCCBs

conforming to IS: 12640 and having sensitivity of 30 mA and

Short Circuit withstand capacity of 10 KA and suitable for

operation on 3 phase and neutral 415V,50Hz. having

characteristic of quick action & tripping with all advance

feature & do not incorporate any electronic component for

following Max. rating erected as directed. 100 Amps FP (100

mA Sensitivity) cat III

Supply, Installation, Testing and Commissioning of suitable sweep,

BEE 5 Star rated, Ceiling fan with Brush Less Direct Current

(BLDC) permanent ferrite magnet Motor, class of insulation:

B, Rust free 3 nos.Aluminium blades, 2 nos. canopies, shackle

kit with earthing provision, 22 gauge copper winding, Power

factor not < 0.9, Service Value (CMM/W) minimum 6.85, Air

delivery minimum 215 CMM, 350 RPM,230v (tolerance as per

177 10.00 IS : 374-2019), THD < 10%, remote or electronic regulator EACH 3370.00

unit for Speed Control and all remaining accessories including

safety pin, nut bolts, washers, temperature rise = 75 degree C

(Max.), suitable for 140 to 285 Voltage and rectifier circuit

with surge, over current and overload protection , 50 Hz,

Single phase AC Supply, earthing etc. Complete as required.[

Make shall be approved by Engineer in Charge] B) 1200 mm

Supply, installation, testing & commissioning of 22 TON ductable AC

unit with IDU & ODU, including copper refrigerant piping with

insulation, gas charging, power cables, 24G GI ducting with 9mm EACH

insulation, canvas connections, powder coated grills, fabrication, SET

transportation and all allied accessories complete as per

specifications and direction of Engineer-in-Charge.

estimated tendered

It No. but maybe item of work Unit Rate(without

Supplying and erecting LED indoor CELLING LIGHT ULTIMA SLIM 2'

X 2' 36W RECESS MOUNT 2 X 2 PANEL Indoor LuminaireTechnical

Specifications Operating Temperature -10℃ to 40℃ Rated Input

Voltage & Frequency 230 VAC, 50Hz Rated Input Wattage 36W ±

10% Rated Input Current 0.165 Amp (Nominal)

Power Factor ≥0.90 ATHD <10% Rated Luminous Flux 3960 lm /

3780 lm / 3600 lm (tolerance as per BIS) Rated Luminaire Efficacy

179 124.00 110 lm/W / 105 lm/W / 100 lm/W (tolerance as per BIS) Correlated EACH 1775.00

Color Temperature (CCT) 6500 K / 4000 K / 3000 K (tolerance as

Color Rendering Index (CRI) >80 Ra Beam Angle 120° (within the

permissible limits) Driver Efficiency ≥85%

LED Life Span >50000 Hrs (Ta=25℃ @L70) Housing CRCA Housing

with White Powder Coating Lens / Reflector PC Diffuser Mounting

Recess etc complate.make-jaquar

EDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick sheet

Steel conforming to IS: 513/CRCA/aluminium pressure die cast

powder coated and high U.V. & corrosion resistance with diffuser

housed in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity

between the ranges shown.)(A) Square/ Circular shaped

Surface/Recessed Mount Downlight with provision for spring

loaded mounting clips complete.IP20(iii) 16-20 watts, Surge-2 KV

Supplying and erecting 24W areva prime round downlight

181 610.00 (LARP01R024XN) included nessasory fitting and labour etc EACH 1285.00

complate As directed by Engineer incharge

Supplying and erecting 30W ESTUS SWIVEL COB

182 105.00 DOWNLIGHT(LETS36R030XN) included nessasory fitting and labour EACH 1340.00

etc complate As directed by Engineer incharge

Supplying and erecting WALL LIGHT- 1 LIGHT FROSTED GLASS WALL

LAMP WITH ANTIQUE BRASS FINISH(DWL-ABR-WL5010W) included

nessasory fitting and labour etc complate As directed by

Engineer incharge

Supplying and erecting WALL LIGHT- 10W BULK HEAD LIGHT

184 22.00 (LBLKO2X0110XC) included nessasory fitting and labour etc EACH 1090.00

complate As directed by Engineer incharge

Supplying and erecting 1 MTR 3 LINE TRACK (ACI-WHT-

185 3.00 LTRK3L1MTRBL) included nessasory fitting and labour etc complate EACH 855.00

As directed by Engineer incharge

Supplying and erecting 2 MTR 3 LINE TRCAK (ACI-WHT-

186 61.00 LTRK3L2MTRBL) included nessasory fitting and labour etc complate EACH 1635.00

As directed by Engineer incharge

Supplying and erecting I SHAPE 3 LINE TRACK CONNECTOR (ACI-

187 57.00 BLK-LTRCBL3LISHP) included nessasory fitting and labour etc EACH 200.00

complate As directed by Engineer incharge

Supplying and erecting 10W 3 LINE TRACK LIGHT(IRL-BLK-

188 194.00 LTRLB1RO10XN) included nessasory fitting and labour etc EACH 2285.00

complate As directed by Engineer incharge

Supplying and erecting 20W 3 LINE TRACK LIGHT (IRL-BLK-

189 56.00 LTRLB1RO20XN) included nessasory fitting and labour etc EACH 3775.00

complate As directed by Engineer incharge

estimated tendered

It No. but maybe item of work Unit Rate(without

Supplying and erecting LED indoor fittings with LEDs of wattage

Watt to 0.5 Watt assembled on single MCPCB, with housing used

as a heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/ aluminium die cast powder coated and high U.V. &

corrosion resistance with diffuser with company mark/name

160V to 270V, Power Factor more than 0.95, THD < 15%,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity

between the ranges shown.)(A) Tube Light with integral driver(v)

36-40 Watts, Surge-2 KV, IP-20, conventional 4 feet cat III

LED optical Strip Light 14W size W16xH16mmoperating

voltage:DC24V CCT:3000k/CRI>80 beam angle:30 deg SDCM<5

IP rating : IP67 control on/off with suitable DC Driver complete

with aluminium flexible profile 1mtr for 16mmx17mm flex

Spot Light 10W operating voltage:DC24V CCT:3000k/CRI>80

192 22.00 beam angle:30 deg SDCM<5 IP rating : IP66/IK06 control on/off EACH 12290.00

with suitable DC Driver complete (ii) 8 to 11 Watts cat iii

Spot Light 6W operating voltage:DC24V CCT:3000k/CRI>80 beam

193 30.00 angle:30 deg SDCM<5 IP rating : IP66/IK06 control on/off with EACH 7820.00

suitable DC Driver complete (ii) 8 to 11 Watts cat iii

Supplying & erecting approved make low noise decorative

194 35.00 exhaust fan having square frame ABS body with inbuilt lowers & EACH 1990.00

square frame.200mm with 1350RPM Cat.II

Providing and erecting busbar chamber confirming to IS-375

fabricated from 16 G.M.S. sheet, dust & vermin proof having

hinged door with rubber gasket and necessary busbar supports

with Aluminium busbar having current density not more than

Amp. / sq.mm (Rated current / cross section area) duly wrapped

with colour insulation tape for phase sequence, three phase &

neutral each Suitable for following current capacity with

necessary painting mounted on wall or pedestal frame of

required size with necessary connections.(D) Suitable for

estimated tendered

It No. but maybe item of work Unit Rate(without

Providing and erecting Sheet Steel powder coated Vertical

MCB distribution board (VTPN) - flush / surface mounted

double door (IP54) fitted with insulated copper busbar,

isolated neutral link, earth bar and DIN rail, confirming to IS

13032 and BS 5486-1986,IP-54 suitable for 250 AMP TPN

MCCB + RCCB as incomer and three phase outgoing as per

following .(The DBs should be used of same company of MCB

to be used) (D) 12 way outgoing

Solder less crimping type Copper lugs conforming to IS suitable

for cable of following size evenly crimped with high pressure tool

197 25.00 & connected to switchgear terminals with brass/cadmium plated EACH 8.00

nut bolts in an approved manner. (A) 1.5/2.5 to 6 Sq.mm for

CAMERA WORKS ITEM

Supply, Installation, testing and commissioning of Computer

System with UPS system for Surveillance and Monitoring - Pentium

Core i5 with up to 4.70Ghz CPU speed, minimum of 8 GB RAM, up

to 24MB cache, 52X32X52X CDRW Drive & 2TB HDD, optical

Mouse, 106 keys keyboard,Mouse, 2 nos. 10/100 Mbps Ethernet

card ,USB connection & internal modem, 17" colour graphics TFT

monitor & Original Windows 11 and anti-virus software loaded.

(Dell/Lenovo/HP)

SITC of 4 Megapixel up to 20 meter IR IP66 ,Varifocal ,Water Proof

outdoor type Bullet IP netwrok Camera : Up to 4 megapixel high

199 102.00 resolution Full HD1080p video Dual stream with 4mm lens - 3D EACH 5500.00

Digital Noise Reduction3-axis adjustment DC12V Support H.265+

with all required acceesories.

200 1.00 Supply, Installation, Testing & Commissioning of 32 port NVR EACH 18500.00

201 1.00 Supply, Installation, Testing & Commissioning of 64 port NVR EACH 47500.00

Supply, Installation, Testing & Commissioning of 48 CH port POE

Supply, Installation, Testing & Commissioning of 24 CH port POE

Supply, Installation, Testing & Commissioning of 16 CH port POE

Supply, Installation, Testing & Commissioning of 08 CH port POE

206 4.00 Supply, Installation,Testing & Commissioning of 08 TB Hard Drive EACH 22000.00

Supply, Installation,Testing & Commissioning of 42U Floor Mounted

Rack With Required Accessory. Outdoor or Indoor

Supplying & erecting approved make LAN cable of following size

in existing pipe as per direction [C] CAT -

209 25.00 Supply and Installation of HDMI CABEL. RMT 120.00

210 102.00 Junction box for CCTV Camera nos 275.00

Supply, Installation, Testing & Commissioning of LED Monitoring

Screen 43/50 inch LED Monitor

212 220.00 Supply, Installation, Testing & Commissioning of RJ45 Connector NOS 10.00

estimated tendered

It No. but maybe item of work Unit Rate(without

213 102.00 Supply, Installation, Testing & Commissioning of Patch Cord NOS 175.00

Supply, Installation, Testing & Commissioning of 24 Port Patch

Supply, Installation, Testing & Commissioning of Cable Manager

Horizontal Cable Manager

Supply, Installation, Testing & Commissioning of Power Distribution

Unit (PDU)Rack Mounted PDU

217 5800.00 PVC Conduit 25 mm Heavy Duty PVC Conduit for CCTV cabling RMT 30.00

Labor Cess Add 0.01