Supply, Erection, Testing and commissioning of 132 KV D/C line from Rafiganj/GSS (BSPTCL) to Ismailpur/TSS in connection with construction of multi-tracking project between Sonnagar-Pradhankhunta section and any other location under CEE/CON/S/MHX.

Financial Eligibility Criteria Criteria (Para-10.2 (Pt-I) of GCC April 2022):The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per AnnexureVIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.

Bid capacity: For tenders having advertised value more than Rs 10 crore wherein eligibility criteria includes bid capacity also, the tenderer will be qualified only if its available bid capacity is equal to or more than the total bid value of the present tender. The available bid capacity shall be calculated as under:Available Bid Capacity = [A x N x 2] - 0.33xNxBWhere,A = Maximum value of construction works executed and payment received in any one of the previous three financial years or the current financial year (up to date of inviting tender), taking into account the completed as well as works in progress.N= Number of years prescribed for completion of work for which bids has been invited.B = Value of existing commitments and balance amount of ongoing works with the tenderer as on date one month prior to the tender closing date to be completed in next 'N' years.Note: (a)The Tenderer(s) shall furnish the details of -(i)Maximum value of construction works executed and payment received in any one of the previous three financial years or the current financial year (up to date of inviting tender) for calculating A, and(ii)Existing commitments and balance amount of ongoing works with tenderer as per the prescribed proforma of Railway (i.e. Annexure - 'G') for statement of all works in progress and also the works which are awarded to tenderer but yet not started upto the date of inviting of tender for calculating B. In case of no works in hand, a 'NIL' statement should be furnished. The submitted details for (i) and (ii) above should be duly verified by Chartered Accountant.(b)In case if a bidder is JV, the tenderer(s) must furnish the details of (i)Maximum value of construction works executed and payment received in any one of the previous three financial years or the current financial year (up to date of inviting tender) by each member of JV for calculating A, and(ii)Existing commitments and balance amount of ongoing works with each member of JV either in individual capacity or as a member of other JV as per the prescribed proforma of Railway for statement of all works in progress and also the works which are awarded to each member of JV either in individual capacity or as a member of other JV but yet not started upto the date of inviting of tender for calculating B. In case of no works in hand, a 'NIL' statement should be furnished. The submitted details for (i) and (ii) above should be duly verified by Chartered Accountant.(c)Value of a completed work/work in progress/work awarded but yet not started for a Member in an earlier JV shall be reckoned only to the extent of the concerned member's share in that JV for the purpose of satisfying his/her compliance to the above mentioned bid capacity in the tender under consideration.(d)The arithmetic sum of individual "bid capacity" of all the members shall be taken as JV's "bid capacity".(e)In case, the tenderer/s failed to submit the above statement along with offer, their/his offer shall be considered as incomplete and will be rejected summarily.(f)The available bid capacity of tenderer shall be assessed based on the details submitted by the tenderer. In case, the available bid capacity is lesser than estimated cost of work put to tender, his offer shall not be considered even if he has been found eligible in other eligibility criteria/tender requirement.

Technical Eligibility Criteria: The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii)One similar work costing not less than the amount equal to 60% of advertised value of the t e n d e r. Definition of similar work: "(i) Erection, testing and commissioning of 132KV and above voltage transmission line. or (ii) Repairing / Reconductoring / Modification of 132KV and above voltage transmission line" Tender not accompanied by documentary evidence in support of eligibility criteria for similar nature of work will be summarily rejected. (For complete details of the technical eligibility criteria for similar nature of the work, please refer clause 2.0, chapter-3 of the tender document).

(b) (1)In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii)One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(1): Separate completed works of minimum required values shall also be considered for fulfilment of technical eligibility criteria for different components.

(b) (2) In such cases, what constitutes a component in a composite work shall be clearly pre-defined with estimated tender cost of it, as part of the tender documents without any ambiguity.

(b) (3) To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. The scope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause 7 of the Standard General Conditions of Contract or through subcontractor fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract or jointly i.e., partly himself and remaining through subcontractor, with prior approval of Chief Engineer in writing.

Tender not accompanied by documentary evidence in support of eligibility criteria for similar nature of work will be summarily rejected. (For complete details of the technical eligibility criteria for similar nature of the work, please refer clause 2.0, chapter-3 of the tender document).

Contractors should have valid electrical contractors license for the required voltage level or above the required voltage level issued from any state/Central government licensing board. The intended participant shall upload the valid Electrical contractor's license along with the offer/tender as credential.

Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.

Regarding technical and financial eligibility criteria, scanned copies of supportive documents/certificates from competent officials are to be submitted along with their offer.

Scanned copies of documents in support of formation/registration of the company/firm/legal authorization of the person to deal with the tender/notarized/registered copies of the documents wherever required as per tender conditions are to be submitted along with offer.

If a bidder has successfully completed a work as subcontractor and the work experience certificate has been issued for such work to the subcontractor by a Govt. Organization or public listed company as defined in Note for Item 10.1 Para 10 of the Tender Form (Second Sheet), the same shall be considered for the purpose of fulfillment of credentials.

During the execution of work, all materials brought to site by the Contractor must be offered for inspection within advance notice of one month prior to actual date of inspection. Inspection of materials will generally be done by RITES. If volume of material of nature does not fall in the category of RITES inspection, then inspection of material will be done on the basis of MTC & GC ( Manufacturer's TC & GC ). All site acceptance of material must be maintained in one material receipt & issue Register which may be verified by any agency at any time

Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.

Tenderers shall note that the submission of other supporting documents namely- Constitution of firm/JV firm, Work in hand, Arbitration/Court cases,Tools & Plants, Technical Personnel/Man Power and Association of railway Officers, at the time of on line bidding of tender, is important and they shall ensure the same. However Railways may seek clarifications/details/documents in this regard.

Tenderers shall note that the submission of other supporting documents namely- Constitution of firm/JV firm, Work in hand, Arbitration/Court cases,Tools & Plants, Technical Personnel/Man Power and Association of railway Officers, at the time of on line bidding of tender, is important and they shall ensure the same. However Railways may seek clarifications/details/documents in this regard.

PLEASE FILL IN REQUIRED INFORMATION ASKED FOR IN THE SPECIFIED SPACE IN THE E-TENDER. TENDER WILL BE OTHER WISE TREATED INCOMPLETE AND HENCE WILL BE LIABLE FOR REJECTION.

THE QUANTITY SHOWN IN THE SCHEDULES ARE APPROXIMATE AND ARE LIKELY TO VARY ON EITHER SIDE (+/-) AS PER CLAUSE- 2 OF SPECIAL CONDITIONS OF CONTRACT.

As this is a running contract, work order shall be issued as and when site is available. Contractor to plan for supply, erection and commissioning based on work order & handed over sites and approved layout of these sites.